Update copyright years.

[thirdparty/gcc.git] / gcc / config / mn10300 / mn10300.h

diff --git a/gcc/config/mn10300/mn10300.h b/gcc/config/mn10300/mn10300.h
index eb4f2f9f42fcf8410f035dc91f10d9550337bc92..2292c5b743ba51911e2a5b7ae4c558ad3692383a 100644 (file)
--- a/gcc/config/mn10300/mn10300.h
+++ b/gcc/config/mn10300/mn10300.h
@@ -1,7 +1,6 @@
 /* Definitions of target machine for GNU compiler.
    Matsushita MN10300 series
-   Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005,
-   2007, 2008, 2009, 2010, 2011 Free Software Foundation, Inc.
+   Copyright (C) 1996-2020 Free Software Foundation, Inc.
    Contributed by Jeff Law (law@cygnus.com).
 
    This file is part of GCC.
@@ -198,7 +197,7 @@ extern enum processor_type mn10300_tune_cpu;
    Aside from that, you can include as many other registers as you
    like.  */
 
-#define CALL_USED_REGISTERS \
+#define CALL_REALLY_USED_REGISTERS \
   { 1, 1, 0, 0,                                /* data regs */         \
     1, 1, 0, 0,                                /* addr regs */         \
     1,                                 /* arg reg */           \
@@ -212,40 +211,12 @@ extern enum processor_type mn10300_tune_cpu;
     1                                  /* cc reg */            \
   }
 
-/* Note: The definition of CALL_REALLY_USED_REGISTERS is not
-   redundant.  It is needed when compiling in PIC mode because
-   the a2 register becomes fixed (and hence must be marked as
-   call_used) but in order to preserve the ABI it is not marked
-   as call_really_used.  */
-#define CALL_REALLY_USED_REGISTERS CALL_USED_REGISTERS
-
 #define REG_ALLOC_ORDER \
   { 0, 1, 4, 5, 2, 3, 6, 7, 10, 11, 12, 13, 14, 15, 16, 17, 8, 9 \
   , 42, 43, 44, 45, 46, 47, 48, 49, 34, 35, 36, 37, 38, 39, 40, 41 \
   , 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 50, 51 \
   }
 
-/* Return number of consecutive hard regs needed starting at reg REGNO
-   to hold something of mode MODE.
-
-   This is ordinarily the length in words of a value of mode MODE
-   but can be less for certain modes in special long registers.  */
-
-#define HARD_REGNO_NREGS(REGNO, MODE)   \
-  ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD)
-
-/* Value is 1 if hard register REGNO can hold a value of machine-mode
-   MODE.  */
-#define HARD_REGNO_MODE_OK(REGNO, MODE) \
-  mn10300_hard_regno_mode_ok ((REGNO), (MODE))
-
-/* Value is 1 if it is a good idea to tie two pseudo registers
-   when one has mode MODE1 and one has mode MODE2.
-   If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
-   for any hard reg, then this must be 0 for correct output.  */
-#define MODES_TIEABLE_P(MODE1, MODE2) \
-  mn10300_modes_tieable ((MODE1), (MODE2))
-
 /* 4 data, and effectively 3 address registers is small as far as I'm
    concerned.  */
 #define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true
@@ -347,7 +318,8 @@ enum reg_class
    They give nonzero only if REGNO is a hard reg of the suitable class
    or a pseudo reg currently allocated to a suitable hard reg.
    Since they use reg_renumber, they are safe only once reg_renumber
-   has been allocated, which happens in local-alloc.c.  */
+   has been allocated, which happens in reginfo.c during register
+   allocation.  */
 
 #ifndef REG_OK_STRICT
 # define REG_STRICT 0
@@ -404,7 +376,7 @@ enum reg_class
 /* Define this if pushing a word on the stack
    makes the stack pointer a smaller address.  */
 
-#define STACK_GROWS_DOWNWARD
+#define STACK_GROWS_DOWNWARD 1
 
 /* Define this to nonzero if the nominal address of the stack frame
    is at the high-address end of the local variables;
@@ -413,13 +385,6 @@ enum reg_class
 
 #define FRAME_GROWS_DOWNWARD 1
 
-/* Offset within stack frame to start allocating local variables at.
-   If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
-   first local allocated.  Otherwise, it is the offset to the BEGINNING
-   of the first local allocated.  */
-
-#define STARTING_FRAME_OFFSET 0
-
 /* Offset of first parameter from the argument pointer register value.  */
 /* Is equal to the size of the saved fp + pc, even if an fp isn't
    saved since the value is used before we know.  */
@@ -516,7 +481,7 @@ struct cum_arg
 /* The return address is saved both in the stack and in MDR.  Using
    the stack location is handiest for what unwinding needs.  */
 #define INCOMING_RETURN_ADDR_RTX \
-  gen_rtx_MEM (VOIDmode, gen_rtx_REG (VOIDmode, STACK_POINTER_REGNUM))
+  gen_rtx_MEM (Pmode, gen_rtx_REG (Pmode, STACK_POINTER_REGNUM))
 \f
 /* Maximum number of registers that can appear in a valid memory address.  */
 
@@ -579,7 +544,7 @@ do {                                                                             \
    than accessing full words.  */
 #define SLOW_BYTE_ACCESS 1
 
-#define NO_FUNCTION_CSE
+#define NO_FUNCTION_CSE 1
 
 /* According expr.c, a value of around 6 should minimize code size, and
    for the MN10300 series, that's our primary concern.  */
@@ -699,7 +664,7 @@ do {                                                                             \
 
 /* Define if operations between registers always perform the operation
    on the full register even if a narrower mode is specified.  */
-#define WORD_REGISTER_OPERATIONS
+#define WORD_REGISTER_OPERATIONS 1
 
 #define LOAD_EXTEND_OP(MODE) ZERO_EXTEND
 
@@ -712,10 +677,6 @@ do {                                                                            \
    of a shift count.  */
 #define SHIFT_COUNT_TRUNCATED 1
 
-/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
-   is done just by pretending it is already truncated.  */
-#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
-
 /* Specify the machine mode that pointers have.
    After generation of rtl, the compiler makes no further distinction
    between pointers and any other objects of this machine mode.  */