/* Definitions of target machine for GNU compiler, for the pdp-11
- Copyright (C) 1994, 1995, 1996, 1998, 1999, 2000, 2001, 2002, 2004
- Free Software Foundation, Inc.
+ Copyright (C) 1994-2024 Free Software Foundation, Inc.
Contributed by Michael K. Gschwind (mike@vlsivie.tuwien.ac.at).
This file is part of GCC.
GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
GCC is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GCC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
#define CONSTANT_POOL_BEFORE_FUNCTION 0
/* check whether load_fpu_reg or not */
-#define LOAD_FPU_REG_P(x) ((x)>=8 && (x)<=11)
-#define NO_LOAD_FPU_REG_P(x) ((x)==12 || (x)==13)
+#define LOAD_FPU_REG_P(x) ((x) >= AC0_REGNUM && (x) <= AC3_REGNUM)
+#define NO_LOAD_FPU_REG_P(x) ((x) == AC4_REGNUM || (x) == AC5_REGNUM)
#define FPU_REG_P(x) (LOAD_FPU_REG_P(x) || NO_LOAD_FPU_REG_P(x))
-#define CPU_REG_P(x) ((x)<8)
+#define CPU_REG_P(x) ((x) <= PC_REGNUM)
/* Names to predefine in the preprocessor for this target machine. */
do \
{ \
builtin_define_std ("pdp11"); \
+ if (TARGET_INT16) \
+ builtin_define_with_int_value ("__pdp11_int", 16); \
+ else \
+ builtin_define_with_int_value ("__pdp11_int", 32); \
+ if (TARGET_40) \
+ builtin_define_with_int_value ("__pdp11_model", 40); \
+ else if (TARGET_45) \
+ builtin_define_with_int_value ("__pdp11_model", 45); \
+ else \
+ builtin_define_with_int_value ("__pdp11_model", 10); \
+ if (TARGET_FPU) \
+ builtin_define ("__pdp11_fpu"); \
+ if (TARGET_AC0) \
+ builtin_define ("__pdp11_ac0"); \
} \
while (0)
-/* Print subsidiary information on the compiler version in use. */
-#define TARGET_VERSION fprintf (stderr, " (pdp11)");
+#undef PREFERRED_DEBUGGING_TYPE
+#define PREFERRED_DEBUGGING_TYPE NO_DEBUG
-
-/* Generate DBX debugging information. */
-
-/* #define DBX_DEBUGGING_INFO */
-
-/* Run-time compilation parameters selecting different hardware subsets.
-*/
-
-extern int target_flags;
-
-/* Macro to define tables used to set the flags.
- This is a list in braces of triplets in braces,
- each triplet being { "NAME", VALUE, DOC }
- where VALUE is the bits to set or minus the bits to clear and DOC
- is the documentation for --help (NULL if intentionally undocumented).
- An empty string NAME is used to identify the default VALUE. */
-
-#define TARGET_SWITCHES \
-{ { "fpu", 1, N_("Use hardware floating point") }, \
- { "soft-float", -1, N_("Do not use hardware floating point") }, \
-/* return float result in ac0 */ \
- { "ac0", 2, N_("Return floating point results in ac0") }, \
- { "no-ac0", -2, N_("Return floating point results in memory") }, \
-/* is 11/40 */ \
- { "40", 4, N_("Generate code for an 11/40") }, \
- { "no-40", -4, "" }, \
-/* is 11/45 */ \
- { "45", 8, N_("Generate code for an 11/45") }, \
- { "no-45", -8, "" }, \
-/* is 11/10 */ \
- { "10", -12, N_("Generate code for an 11/10") }, \
-/* use movstrhi for bcopy */ \
- { "bcopy", 16, NULL }, \
- { "bcopy-builtin", -16, NULL }, \
-/* use 32 bit for int */ \
- { "int32", 32, N_("Use 32 bit int") }, \
- { "no-int16", 32, N_("Use 32 bit int") }, \
- { "int16", -32, N_("Use 16 bit int") }, \
- { "no-int32", -32, N_("Use 16 bit int") }, \
-/* use 32 bit for float */ \
- { "float32", 64, N_("Use 32 bit float") }, \
- { "no-float64", 64, N_("Use 32 bit float") }, \
- { "float64", -64, N_("Use 64 bit float") }, \
- { "no-float32", -64, N_("Use 64 bit float") }, \
-/* allow abshi pattern? - can trigger "optimizations" which make code SLOW! */\
- { "abshi", 128, NULL }, \
- { "no-abshi", -128, NULL }, \
-/* is branching expensive - on a PDP, it's actually really cheap */ \
-/* this is just to play around and check what code gcc generates */ \
- { "branch-expensive", 256, NULL }, \
- { "branch-cheap", -256, NULL }, \
-/* split instruction and data memory? */ \
- { "split", 1024, N_("Target has split I&D") }, \
- { "no-split", -1024, N_("Target does not have split I&D") }, \
-/* UNIX assembler syntax? */ \
- { "unix-asm", 2048, N_("Use UNIX assembler syntax") }, \
- { "dec-asm", -2048, N_("Use DEC assembler syntax") }, \
-/* default */ \
- { "", TARGET_DEFAULT, NULL} \
-}
-
-#define TARGET_DEFAULT (1 | 8 | 128 | TARGET_UNIX_ASM_DEFAULT)
-
-#define TARGET_FPU (target_flags & 1)
-#define TARGET_SOFT_FLOAT (!TARGET_FPU)
-
-#define TARGET_AC0 ((target_flags & 2) && TARGET_FPU)
-#define TARGET_NO_AC0 (! TARGET_AC0)
-
-#define TARGET_45 (target_flags & 8)
-#define TARGET_40_PLUS ((target_flags & 4) || (target_flags & 8))
+#define TARGET_40_PLUS (TARGET_40 || TARGET_45)
#define TARGET_10 (! TARGET_40_PLUS)
-#define TARGET_BCOPY_BUILTIN (! (target_flags & 16))
-
-#define TARGET_INT16 (! TARGET_INT32)
-#define TARGET_INT32 (target_flags & 32)
-
-#define TARGET_FLOAT32 (target_flags & 64)
-#define TARGET_FLOAT64 (! TARGET_FLOAT32)
-
-#define TARGET_ABSHI_BUILTIN (target_flags & 128)
-
-#define TARGET_BRANCH_EXPENSIVE (target_flags & 256)
-#define TARGET_BRANCH_CHEAP (!TARGET_BRANCH_EXPENSIVE)
-
-#define TARGET_SPLIT (target_flags & 1024)
-#define TARGET_NOSPLIT (! TARGET_SPLIT)
-
-#define TARGET_UNIX_ASM (target_flags & 2048)
#define TARGET_UNIX_ASM_DEFAULT 0
+/* "Dialect" just distinguishes between standard DEC mnemonics, which
+ are also used by the GNU assembler, vs. Unix mnemonics and float
+ register names. So it is tied to the -munit-asm option, and treats
+ -mgnu-asm and -mdec-asm as equivalent (both are dialect zero). */
#define ASSEMBLER_DIALECT (TARGET_UNIX_ASM ? 1 : 0)
\f
#define LONG_TYPE_SIZE 32
#define LONG_LONG_TYPE_SIZE 64
-/* if we set FLOAT_TYPE_SIZE to 32, we could have the benefit
- of saving core for huge arrays - the definitions are
- already in md - but floats can never reside in
- an FPU register - we keep the FPU in double float mode
- all the time !! */
-#define FLOAT_TYPE_SIZE (TARGET_FLOAT32 ? 32 : 64)
+/* In earlier versions, FLOAT_TYPE_SIZE was selectable as 32 or 64,
+ but that conflicts with Fortran language rules. Since there is no
+ obvious reason why we should have that feature -- other targets
+ generally don't have float and double the same size -- I've removed
+ it. Note that it continues to be true (for now) that arithmetic is
+ always done with 64-bit values, i.e., the FPU is always in "double"
+ mode. */
+#define FLOAT_TYPE_SIZE 32
#define DOUBLE_TYPE_SIZE 64
#define LONG_DOUBLE_TYPE_SIZE 64
/* machine types from ansi */
-#define SIZE_TYPE "unsigned int" /* definition of size_t */
-#define WCHAR_TYPE "int" /* or long int???? */
+#define SIZE_TYPE "short unsigned int" /* definition of size_t */
+#define WCHAR_TYPE "short int" /* or long int???? */
#define WCHAR_TYPE_SIZE 16
-#define PTRDIFF_TYPE "int"
+#define PTRDIFF_TYPE "short int"
/* target machine storage layout */
/* Define this if most significant byte of a word is the lowest numbered. */
#define BYTES_BIG_ENDIAN 0
-/* Define this if most significant word of a multiword number is numbered. */
+/* Define this if most significant word of a multiword number is first. */
#define WORDS_BIG_ENDIAN 1
+/* Define that floats are in VAX order, not high word first as for ints. */
+#define FLOAT_WORDS_BIG_ENDIAN 0
+
/* Width of a word, in units (bytes).
UNITS OR BYTES - seems like units */
#define UNITS_PER_WORD 2
-/* Maximum sized of reasonable data type
- DImode or Dfmode ...*/
+/* This machine doesn't use IEEE floats. */
+/* Because the pdp11 (at least Unix) convention for 32-bit ints is
+ big endian, opposite for what you need for float, the vax float
+ conversion routines aren't actually used directly. But the underlying
+ format is indeed the vax/pdp11 float format. */
+extern const struct real_format pdp11_f_format;
+extern const struct real_format pdp11_d_format;
+
+/* Maximum sized of reasonable data type -- DImode ...*/
#define MAX_FIXED_MODE_SIZE 64
/* Allocation boundary (in *bits*) for storing pointers in memory. */
/* Define this if move instructions will actually fail to work
when given unaligned data. */
#define STRICT_ALIGNMENT 1
+
+/* "HW_DIVIDE" actually means 64 by 32 bit divide. While some PDP11
+ models have hardware divide, it is for 32 by 16 bits only, so we
+ call this platform "no hardware divide". */
+#define TARGET_HAS_NO_HW_DIVIDE 1
\f
/* Standard register usage. */
we have 8 integer registers, plus 6 float
(don't use scratch float !) */
-#define FIRST_PSEUDO_REGISTER 14
-
/* 1 for registers that have pervasive standard uses
and are not available for the register allocator.
reg 5 = fp; not necessarily!
*/
-/* don't let them touch fp regs for the time being !*/
-
#define FIXED_REGISTERS \
{0, 0, 0, 0, 0, 0, 1, 1, \
- 0, 0, 0, 0, 0, 0 }
+ 0, 0, 0, 0, 0, 0, 1, 1, \
+ 1 }
/* don't know about fp */
#define CALL_USED_REGISTERS \
{1, 1, 0, 0, 0, 0, 1, 1, \
- 0, 0, 0, 0, 0, 0 }
+ 0, 0, 0, 0, 0, 0, 1, 1, \
+ 1 }
-/* Make sure everything's fine if we *don't* have an FPU.
- This assumes that putting a register in fixed_regs will keep the
- compiler's mitts completely off it. We don't bother to zero it out
- of register classes. Also fix incompatible register naming with
- the UNIX assembler.
-*/
-#define CONDITIONAL_REGISTER_USAGE \
-{ \
- int i; \
- HARD_REG_SET x; \
- if (!TARGET_FPU) \
- { \
- COPY_HARD_REG_SET (x, reg_class_contents[(int)FPU_REGS]); \
- for (i = 0; i < FIRST_PSEUDO_REGISTER; i++ ) \
- if (TEST_HARD_REG_BIT (x, i)) \
- fixed_regs[i] = call_used_regs[i] = 1; \
- } \
- \
- if (TARGET_AC0) \
- call_used_regs[8] = 1; \
- if (TARGET_UNIX_ASM) \
- { \
- /* Change names of FPU registers for the UNIX assembler. */ \
- reg_names[8] = "fr0"; \
- reg_names[9] = "fr1"; \
- reg_names[10] = "fr2"; \
- reg_names[11] = "fr3"; \
- reg_names[12] = "fr4"; \
- reg_names[13] = "fr5"; \
- } \
-}
-
-/* Return number of consecutive hard regs needed starting at reg REGNO
- to hold something of mode MODE.
- This is ordinarily the length in words of a value of mode MODE
- but can be less for certain modes in special long registers.
-*/
-
-#define HARD_REGNO_NREGS(REGNO, MODE) \
-((REGNO < 8)? \
- ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD) \
- :1)
-
-
-/* Value is 1 if hard register REGNO can hold a value of machine-mode MODE.
- On the pdp, the cpu registers can hold any mode - check alignment
-
- FPU can only hold DF - simplifies life!
-*/
-#define HARD_REGNO_MODE_OK(REGNO, MODE) \
-(((REGNO) < 8)? \
- ((GET_MODE_BITSIZE(MODE) <= 16) \
- || (GET_MODE_BITSIZE(MODE) == 32 && !((REGNO) & 1))) \
- :(MODE) == DFmode)
-
-
-/* Value is 1 if it is a good idea to tie two pseudo registers
- when one has mode MODE1 and one has mode MODE2.
- If HARD_REGNO_MODE_OK could produce different values for MODE1 and MODE2,
- for any hard reg, then this must be 0 for correct output. */
-#define MODES_TIEABLE_P(MODE1, MODE2) 0
-
/* Specify the registers used for certain standard purposes.
The values of these macros are register numbers. */
-/* the pdp11 pc overloaded on a register that the compiler knows about. */
-#define PC_REGNUM 7
-
-/* Register to use for pushing function arguments. */
-#define STACK_POINTER_REGNUM 6
-
-/* Base register for access to local variables of the function. */
-#define FRAME_POINTER_REGNUM 5
-
-/* Value should be nonzero if functions must have frame pointers.
- Zero means the frame pointer need not be set up (and parms
- may be accessed via the stack pointer) in functions that seem suitable.
- This is computed in `reload', in reload1.c.
- */
-
-#define FRAME_POINTER_REQUIRED 0
-
-/* Base register for access to arguments of the function. */
-#define ARG_POINTER_REGNUM 5
-
/* Register in which static-chain is passed to a function. */
/* ??? - i don't want to give up a reg for this! */
#define STATIC_CHAIN_REGNUM 4
/* The pdp has a couple of classes:
-MUL_REGS are used for odd numbered regs, to use in 16 bit multiplication
- (even numbered do 32 bit multiply)
-LMUL_REGS long multiply registers (even numbered regs )
- (don't need them, all 32 bit regs are even numbered!)
+MUL_REGS are used for odd numbered regs, to use in 16-bit multiplication
+ (even numbered do 32-bit multiply)
GENERAL_REGS is all cpu
LOAD_FPU_REGS is the first four cpu regs, they are easier to load
NO_LOAD_FPU_REGS is ac4 and ac5, currently - difficult to load them
FPU_REGS is all fpu regs
+CC_REGS is the condition codes (CPU and FPU)
*/
-enum reg_class { NO_REGS, MUL_REGS, GENERAL_REGS, LOAD_FPU_REGS, NO_LOAD_FPU_REGS, FPU_REGS, ALL_REGS, LIM_REG_CLASSES };
-
-#define N_REG_CLASSES (int) LIM_REG_CLASSES
+enum reg_class
+ { NO_REGS,
+ NOTR0_REG,
+ NOTR1_REG,
+ NOTR2_REG,
+ NOTR3_REG,
+ NOTR4_REG,
+ NOTR5_REG,
+ NOTSP_REG,
+ MUL_REGS,
+ GENERAL_REGS,
+ LOAD_FPU_REGS,
+ NO_LOAD_FPU_REGS,
+ FPU_REGS,
+ CC_REGS,
+ ALL_REGS,
+ LIM_REG_CLASSES };
+
+#define N_REG_CLASSES ((int) LIM_REG_CLASSES)
/* have to allow this till cmpsi/tstsi are fixed in a better way !! */
-#define SMALL_REGISTER_CLASSES 1
-
-/* Since GENERAL_REGS is the same class as ALL_REGS,
- don't give it a different class number; just make it an alias. */
-
-/* #define GENERAL_REGS ALL_REGS */
-
-/* Give names of register classes as strings for dump file. */
-
-#define REG_CLASS_NAMES {"NO_REGS", "MUL_REGS", "GENERAL_REGS", "LOAD_FPU_REGS", "NO_LOAD_FPU_REGS", "FPU_REGS", "ALL_REGS" }
+#define TARGET_SMALL_REGISTER_CLASSES_FOR_MODE_P hook_bool_mode_true
+
+/* Give names of register classes as strings for dump file. */
+
+#define REG_CLASS_NAMES \
+ { "NO_REGS", \
+ "NOTR0_REG", \
+ "NOTR1_REG", \
+ "NOTR2_REG", \
+ "NOTR3_REG", \
+ "NOTR4_REG", \
+ "NOTR5_REG", \
+ "SP_REG", \
+ "MUL_REGS", \
+ "GENERAL_REGS", \
+ "LOAD_FPU_REGS", \
+ "NO_LOAD_FPU_REGS", \
+ "FPU_REGS", \
+ "CC_REGS", \
+ "ALL_REGS" }
/* Define which registers fit in which classes.
This is an initializer for a vector of HARD_REG_SET
of length N_REG_CLASSES. */
-#define REG_CLASS_CONTENTS {{0}, {0x00aa}, {0x00ff}, {0x0f00}, {0x3000}, {0x3f00}, {0x3fff}}
+#define REG_CLASS_CONTENTS \
+ { {0x00000}, /* NO_REGS */ \
+ {0x000fe}, /* NOTR0_REG */ \
+ {0x000fd}, /* NOTR1_REG */ \
+ {0x000fb}, /* NOTR2_REG */ \
+ {0x000f7}, /* NOTR3_REG */ \
+ {0x000ef}, /* NOTR4_REG */ \
+ {0x000df}, /* NOTR5_REG */ \
+ {0x000bf}, /* NOTSP_REG */ \
+ {0x0002a}, /* MUL_REGS */ \
+ {0x040ff}, /* GENERAL_REGS */ \
+ {0x00f00}, /* LOAD_FPU_REGS */ \
+ {0x03000}, /* NO_LOAD_FPU_REGS */ \
+ {0x03f00}, /* FPU_REGS */ \
+ {0x18000}, /* CC_REGS */ \
+ {0x1ffff}} /* ALL_REGS */
/* The same information, inverted:
Return the class number of the smallest class containing
reg number REGNO. This could be a conditional expression
or could index an array. */
-#define REGNO_REG_CLASS(REGNO) \
-((REGNO)>=8?((REGNO)<=11?LOAD_FPU_REGS:NO_LOAD_FPU_REGS):(((REGNO)&1)?MUL_REGS:GENERAL_REGS))
-
+#define REGNO_REG_CLASS(REGNO) pdp11_regno_reg_class (REGNO)
/* The class value for index registers, and the one for base regs. */
#define INDEX_REG_CLASS GENERAL_REGS
#define BASE_REG_CLASS GENERAL_REGS
-/* Get reg_class from a letter such as appears in the machine description. */
-
-#define REG_CLASS_FROM_LETTER(C) \
-((C) == 'f' ? FPU_REGS : \
- ((C) == 'd' ? MUL_REGS : \
- ((C) == 'a' ? LOAD_FPU_REGS : NO_REGS)))
-
-
-/* The letters I, J, K, L and M in a register constraint string
- can be used to stand for particular ranges of immediate operands.
- This macro defines what the ranges are.
- C is the letter, and VALUE is a constant value.
- Return 1 if VALUE is in the range specified by C.
-
- I bits 31-16 0000
- J bits 15-00 0000
- K completely random 32 bit
- L,M,N -1,1,0 respectively
- O where doing shifts in sequence is faster than
- one big shift
-*/
-
-#define CONST_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'I' ? ((VALUE) & 0xffff0000) == 0 \
- : (C) == 'J' ? ((VALUE) & 0x0000ffff) == 0 \
- : (C) == 'K' ? (((VALUE) & 0xffff0000) != 0 \
- && ((VALUE) & 0x0000ffff) != 0) \
- : (C) == 'L' ? ((VALUE) == 1) \
- : (C) == 'M' ? ((VALUE) == -1) \
- : (C) == 'N' ? ((VALUE) == 0) \
- : (C) == 'O' ? (abs(VALUE) >1 && abs(VALUE) <= 4) \
- : 0)
-
-/* Similar, but for floating constants, and defining letters G and H.
- Here VALUE is the CONST_DOUBLE rtx itself. */
-
-#define CONST_DOUBLE_OK_FOR_LETTER_P(VALUE, C) \
- ((C) == 'G' && XINT (VALUE, 0) == 0 && XINT (VALUE, 1) == 0)
-
-
-/* Letters in the range `Q' through `U' may be defined in a
- machine-dependent fashion to stand for arbitrary operand types.
- The machine description macro `EXTRA_CONSTRAINT' is passed the
- operand as its first argument and the constraint letter as its
- second operand.
-
- `Q' is for memory references using take more than 1 instruction.
- `R' is for memory references which take 1 word for the instruction. */
-
-#define EXTRA_CONSTRAINT(OP,CODE) \
- ((GET_CODE (OP) != MEM) ? 0 \
- : !legitimate_address_p (GET_MODE (OP), XEXP (OP, 0)) ? 0 \
- : ((CODE) == 'Q') ? !simple_memory_operand (OP, GET_MODE (OP)) \
- : ((CODE) == 'R') ? simple_memory_operand (OP, GET_MODE (OP)) \
- : 0)
-
-/* Given an rtx X being reloaded into a reg required to be
- in class CLASS, return the class of reg to actually use.
- In general this is just CLASS; but on some machines
- in some cases it is preferable to use a more restrictive class.
-
-loading is easier into LOAD_FPU_REGS than FPU_REGS! */
-
-#define PREFERRED_RELOAD_CLASS(X,CLASS) \
-(((CLASS) != FPU_REGS)?(CLASS):LOAD_FPU_REGS)
-
-#define SECONDARY_RELOAD_CLASS(CLASS,MODE,x) \
-(((CLASS) == NO_LOAD_FPU_REGS && !(REG_P(x) && LOAD_FPU_REG_P(REGNO(x))))?LOAD_FPU_REGS:NO_REGS)
-
+/* Return TRUE if the class is a CPU register. */
+#define CPU_REG_CLASS(CLASS) \
+ (CLASS >= NOTR0_REG && CLASS <= GENERAL_REGS)
+
/* Return the maximum number of consecutive registers
needed to represent mode MODE in a register of class CLASS. */
#define CLASS_MAX_NREGS(CLASS, MODE) \
-((CLASS == GENERAL_REGS || CLASS == MUL_REGS)? \
- ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD): \
- 1 \
-)
-
+ (CPU_REG_CLASS (CLASS) ? \
+ ((GET_MODE_SIZE (MODE) + UNITS_PER_WORD - 1) / UNITS_PER_WORD): \
+ 1 \
+ )
\f
/* Stack layout; function entry, exit and calling. */
/* Define this if pushing a word on the stack
makes the stack pointer a smaller address. */
-#define STACK_GROWS_DOWNWARD
+#define STACK_GROWS_DOWNWARD 1
-/* Define this if the nominal address of the stack frame
+/* Define this to nonzero if the nominal address of the stack frame
is at the high-address end of the local variables;
that is, each additional local variable allocated
goes at a more negative offset in the frame.
*/
-#define FRAME_GROWS_DOWNWARD
+#define FRAME_GROWS_DOWNWARD 1
-/* Offset within stack frame to start allocating local variables at.
- If FRAME_GROWS_DOWNWARD, this is the offset to the END of the
- first local allocated. Otherwise, it is the offset to the BEGINNING
- of the first local allocated. */
-#define STARTING_FRAME_OFFSET 0
-
-/* If we generate an insn to push BYTES bytes,
- this says how many the stack pointer really advances by.
- On the pdp11, the stack is on an even boundary */
-#define PUSH_ROUNDING(BYTES) ((BYTES + 1) & ~1)
+#define PUSH_ROUNDING(BYTES) pdp11_push_rounding (BYTES)
/* current_first_parm_offset stores the # of registers pushed on the
stack */
extern int current_first_parm_offset;
-/* Offset of first parameter from the argument pointer register value.
- For the pdp11, this is nonzero to account for the return address.
- 1 - return address
- 2 - frame pointer (always saved, even when not used!!!!)
- -- chnage some day !!!:q!
-
-*/
-#define FIRST_PARM_OFFSET(FNDECL) 4
-
-/* Value is 1 if returning from a function call automatically
- pops the arguments described by the number-of-args field in the call.
- FUNDECL is the declaration node of the function (as a tree),
- FUNTYPE is the data type of the function (as a tree),
- or for a library call it is an identifier node for the subroutine name. */
-
-#define RETURN_POPS_ARGS(FUNDECL,FUNTYPE,SIZE) 0
+/* Offset of first parameter from the argument pointer register value. */
+#define FIRST_PARM_OFFSET(FNDECL) 0
/* Define how to find the value returned by a function.
VALTYPE is the data type of the value (as a tree).
If the precise function being called is known, FUNC is its FUNCTION_DECL;
otherwise, FUNC is 0. */
#define BASE_RETURN_VALUE_REG(MODE) \
- ((MODE) == DFmode ? 8 : 0)
-
-/* On the pdp11 the value is found in R0 (or ac0???
-not without FPU!!!! ) */
-
-#define FUNCTION_VALUE(VALTYPE, FUNC) \
- gen_rtx_REG (TYPE_MODE (VALTYPE), BASE_RETURN_VALUE_REG(TYPE_MODE(VALTYPE)))
-
-/* and the called function leaves it in the first register.
- Difference only on machines with register windows. */
-
-#define FUNCTION_OUTGOING_VALUE(VALTYPE, FUNC) \
- gen_rtx_REG (TYPE_MODE (VALTYPE), BASE_RETURN_VALUE_REG(TYPE_MODE(VALTYPE)))
-
-/* Define how to find the value returned by a library function
- assuming the value has mode MODE. */
-
-#define LIBCALL_VALUE(MODE) gen_rtx_REG (MODE, BASE_RETURN_VALUE_REG(MODE))
-
-/* 1 if N is a possible register number for a function value
- as seen by the caller.
- On the pdp, the first "output" reg is the only register thus used.
-
-maybe ac0 ? - as option someday! */
-
-#define FUNCTION_VALUE_REGNO_P(N) (((N) == 0) || (TARGET_AC0 && (N) == 8))
+ (FLOAT_MODE_P (MODE) ? AC0_REGNUM : RETVAL_REGNUM)
/* 1 if N is a possible register number for function argument passing.
- not used on pdp */
when the function gets a structure-value-address as an
invisible first argument. */
-#define INIT_CUMULATIVE_ARGS(CUM,FNTYPE,LIBNAME,INDIRECT) \
+#define INIT_CUMULATIVE_ARGS(CUM, FNTYPE, LIBNAME, INDIRECT, N_NAMED_ARGS) \
((CUM) = 0)
-/* Update the data in CUM to advance over an argument
- of mode MODE and data type TYPE.
- (TYPE is null for libcalls where that information may not be available.)
-
-*/
-
-
-#define FUNCTION_ARG_ADVANCE(CUM, MODE, TYPE, NAMED) \
- ((CUM) += ((MODE) != BLKmode \
- ? (GET_MODE_SIZE (MODE)) \
- : (int_size_in_bytes (TYPE))))
-
-/* Determine where to put an argument to a function.
- Value is zero to push the argument on the stack,
- or a hard register in which to store the argument.
-
- MODE is the argument's machine mode.
- TYPE is the data type of the argument (as a tree).
- This is null for libcalls where that information may
- not be available.
- CUM is a variable of type CUMULATIVE_ARGS which gives info about
- the preceding args and about the function being called.
- NAMED is nonzero if this argument is a named parameter
- (otherwise it is an extra parameter matching an ellipsis). */
-
-#define FUNCTION_ARG(CUM, MODE, TYPE, NAMED) 0
-
-/* Define where a function finds its arguments.
- This would be different from FUNCTION_ARG if we had register windows. */
-/*
-#define FUNCTION_INCOMING_ARG(CUM, MODE, TYPE, NAMED) \
- FUNCTION_ARG (CUM, MODE, TYPE, NAMED)
-*/
-
-/* For an arg passed partly in registers and partly in memory,
- this is the number of registers used.
- For args passed entirely in registers or entirely in memory, zero. */
-
-#define FUNCTION_ARG_PARTIAL_NREGS(CUM, MODE, TYPE, NAMED) 0
-
/* Output assembler code to FILE to increment profiler label # LABELNO
for profiling a function entry. */
-#define FUNCTION_PROFILER(FILE, LABELNO) \
- abort ();
+#define FUNCTION_PROFILER(FILE, LABELNO)
/* EXIT_IGNORE_STACK should be nonzero if, when returning from a function,
the stack pointer does not matter. The value is tested only in
functions that have frame pointers.
No definition is equivalent to always zero. */
-extern int may_call_alloca;
-
#define EXIT_IGNORE_STACK 1
-#define INITIAL_FRAME_POINTER_OFFSET(DEPTH_VAR) \
-{ \
- int offset, regno; \
- offset = get_frame_size(); \
- for (regno = 0; regno < 8; regno++) \
- if (regs_ever_live[regno] && ! call_used_regs[regno]) \
- offset += 2; \
- for (regno = 8; regno < 14; regno++) \
- if (regs_ever_live[regno] && ! call_used_regs[regno]) \
- offset += 8; \
- /* offset -= 2; no fp on stack frame */ \
- (DEPTH_VAR) = offset; \
-}
-
+/* Definitions for register eliminations.
+
+ This is an array of structures. Each structure initializes one pair
+ of eliminable registers. The "from" register number is given first,
+ followed by "to". Eliminations of the same "from" register are listed
+ in order of preference.
+
+ There are two registers that can be eliminated on the pdp11. The
+ arg pointer can be replaced by the frame pointer; the frame pointer
+ can often be replaced by the stack pointer. */
+
+#define ELIMINABLE_REGS \
+{{ ARG_POINTER_REGNUM, STACK_POINTER_REGNUM}, \
+ { ARG_POINTER_REGNUM, FRAME_POINTER_REGNUM}, \
+ { FRAME_POINTER_REGNUM, STACK_POINTER_REGNUM}}
+
+#define INITIAL_ELIMINATION_OFFSET(FROM, TO, OFFSET) \
+ ((OFFSET) = pdp11_initial_elimination_offset ((FROM), (TO)))
+
\f
/* Addressing modes, and classification of registers for them. */
They give nonzero only if REGNO is a hard reg of the suitable class
or a pseudo reg currently allocated to a suitable hard reg.
Since they use reg_renumber, they are safe only once reg_renumber
- has been allocated, which happens in local-alloc.c. */
+ has been allocated, which happens in reginfo.cc during register
+ allocation. */
-#define REGNO_OK_FOR_INDEX_P(REGNO) \
- ((REGNO) < 8 || (unsigned) reg_renumber[REGNO] < 8)
#define REGNO_OK_FOR_BASE_P(REGNO) \
- ((REGNO) < 8 || (unsigned) reg_renumber[REGNO] < 8)
+ ((REGNO) <= PC_REGNUM || (unsigned) reg_renumber[REGNO] <= PC_REGNUM || \
+ (REGNO) == ARG_POINTER_REGNUM || (REGNO) == FRAME_POINTER_REGNUM)
+
+#define REGNO_OK_FOR_INDEX_P(REGNO) REGNO_OK_FOR_BASE_P (REGNO)
/* Now macros that check whether X is a register and also,
strictly, whether it is in a specified class.
\f
/* Maximum number of registers that can appear in a valid memory address. */
-#define MAX_REGS_PER_ADDRESS 2
-
-/* Recognize any constant value that is a valid address. */
-
-#define CONSTANT_ADDRESS_P(X) CONSTANT_P (X)
-
-/* Nonzero if the constant value X is a legitimate general operand.
- It is given that X satisfies CONSTANT_P or is a CONST_DOUBLE. */
-
-#define LEGITIMATE_CONSTANT_P(X) (TARGET_FPU? 1: !(GET_CODE(X) == CONST_DOUBLE))
+#define MAX_REGS_PER_ADDRESS 1
/* The macros REG_OK_FOR..._P assume that the arg is a REG rtx
and check its validity for a certain class.
#define REG_OK_FOR_BASE_P(X) REGNO_OK_FOR_BASE_P (REGNO (X))
#endif
-\f
-/* GO_IF_LEGITIMATE_ADDRESS recognizes an RTL expression
- that is a valid memory address for an instruction.
- The MODE argument is the machine mode for the MEM expression
- that wants to use this address.
-
-*/
-
-#define GO_IF_LEGITIMATE_ADDRESS(mode, operand, ADDR) \
-{ \
- rtx xfoob; \
- \
- /* accept (R0) */ \
- if (GET_CODE (operand) == REG \
- && REG_OK_FOR_BASE_P(operand)) \
- goto ADDR; \
- \
- /* accept @#address */ \
- if (CONSTANT_ADDRESS_P (operand)) \
- goto ADDR; \
- \
- /* accept X(R0) */ \
- if (GET_CODE (operand) == PLUS \
- && GET_CODE (XEXP (operand, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (operand, 0)) \
- && CONSTANT_ADDRESS_P (XEXP (operand, 1))) \
- goto ADDR; \
- \
- /* accept -(R0) */ \
- if (GET_CODE (operand) == PRE_DEC \
- && GET_CODE (XEXP (operand, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (operand, 0))) \
- goto ADDR; \
- \
- /* accept (R0)+ */ \
- if (GET_CODE (operand) == POST_INC \
- && GET_CODE (XEXP (operand, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (operand, 0))) \
- goto ADDR; \
- \
- /* accept -(SP) -- which uses PRE_MODIFY for byte mode */ \
- if (GET_CODE (operand) == PRE_MODIFY \
- && GET_CODE (XEXP (operand, 0)) == REG \
- && REGNO (XEXP (operand, 0)) == 6 \
- && GET_CODE ((xfoob = XEXP (operand, 1))) == PLUS \
- && GET_CODE (XEXP (xfoob, 0)) == REG \
- && REGNO (XEXP (xfoob, 0)) == 6 \
- && CONSTANT_P (XEXP (xfoob, 1)) \
- && INTVAL (XEXP (xfoob,1)) == -2) \
- goto ADDR; \
- \
- /* accept (SP)+ -- which uses POST_MODIFY for byte mode */ \
- if (GET_CODE (operand) == POST_MODIFY \
- && GET_CODE (XEXP (operand, 0)) == REG \
- && REGNO (XEXP (operand, 0)) == 6 \
- && GET_CODE ((xfoob = XEXP (operand, 1))) == PLUS \
- && GET_CODE (XEXP (xfoob, 0)) == REG \
- && REGNO (XEXP (xfoob, 0)) == 6 \
- && CONSTANT_P (XEXP (xfoob, 1)) \
- && INTVAL (XEXP (xfoob,1)) == 2) \
- goto ADDR; \
- \
- \
- /* handle another level of indirection ! */ \
- if (GET_CODE(operand) != MEM) \
- goto fail; \
- \
- xfoob = XEXP (operand, 0); \
- \
- /* (MEM:xx (MEM:xx ())) is not valid for SI, DI and currently */ \
- /* also forbidden for float, because we have to handle this */ \
- /* in output_move_double and/or output_move_quad() - we could */ \
- /* do it, but currently it's not worth it!!! */ \
- /* now that DFmode cannot go into CPU register file, */ \
- /* maybe I should allow float ... */ \
- /* but then I have to handle memory-to-memory moves in movdf ?? */ \
- \
- if (GET_MODE_BITSIZE(mode) > 16) \
- goto fail; \
- \
- /* accept @(R0) - which is @0(R0) */ \
- if (GET_CODE (xfoob) == REG \
- && REG_OK_FOR_BASE_P(xfoob)) \
- goto ADDR; \
- \
- /* accept @address */ \
- if (CONSTANT_ADDRESS_P (xfoob)) \
- goto ADDR; \
- \
- /* accept @X(R0) */ \
- if (GET_CODE (xfoob) == PLUS \
- && GET_CODE (XEXP (xfoob, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (xfoob, 0)) \
- && CONSTANT_ADDRESS_P (XEXP (xfoob, 1))) \
- goto ADDR; \
- \
- /* accept @-(R0) */ \
- if (GET_CODE (xfoob) == PRE_DEC \
- && GET_CODE (XEXP (xfoob, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (xfoob, 0))) \
- goto ADDR; \
- \
- /* accept @(R0)+ */ \
- if (GET_CODE (xfoob) == POST_INC \
- && GET_CODE (XEXP (xfoob, 0)) == REG \
- && REG_OK_FOR_BASE_P (XEXP (xfoob, 0))) \
- goto ADDR; \
- \
- /* anything else is invalid */ \
- fail: ; \
-}
-
-\f
-/* Try machine-dependent ways of modifying an illegitimate address
- to be legitimate. If we find one, return the new, valid address.
- This macro is used in only one place: `memory_address' in explow.c.
-
- OLDX is the address as it was before break_out_memory_refs was called.
- In some cases it is useful to look at this to decide what needs to be done.
-
- MODE and WIN are passed so that this macro can use
- GO_IF_LEGITIMATE_ADDRESS.
-
- It is always safe for this macro to do nothing. It exists to recognize
- opportunities to optimize the output. */
-
-#define LEGITIMIZE_ADDRESS(X,OLDX,MODE,WIN) {}
-
-
-/* Go to LABEL if ADDR (a legitimate address expression)
- has an effect that depends on the machine mode it is used for.
- On the pdp this is for predec/postinc */
-
-#define GO_IF_MODE_DEPENDENT_ADDRESS(ADDR,LABEL) \
- { if (GET_CODE (ADDR) == POST_INC || GET_CODE (ADDR) == PRE_DEC) \
- goto LABEL; \
- }
-
\f
/* Specify the machine mode that this machine uses
for the index in the tablejump instruction. */
`tablejump' insn. */
#define CASE_TAKES_INDEX_RAW
-/* Define as C expression which evaluates to nonzero if the tablejump
- instruction expects the table to contain offsets from the address of the
- table.
- Do not define this if the table should contain absolute addresses. */
-/* #define CASE_VECTOR_PC_RELATIVE 1 */
-
/* Define this as 1 if `char' should by default be signed; else as 0. */
#define DEFAULT_SIGNED_CHAR 1
/* Max number of bytes we can move from memory to memory
in one reasonably fast instruction.
*/
-
#define MOVE_MAX 2
-/* Nonzero if access to memory by byte is slow and undesirable. -
-*/
-#define SLOW_BYTE_ACCESS 0
-
-/* Do not break .stabs pseudos into continuations. */
-#define DBX_CONTIN_LENGTH 0
+/* Max number of insns to use for inline move rather than library
+ call. */
+#define MOVE_RATIO(speed) 6
-/* Value is 1 if truncating an integer of INPREC bits to OUTPREC bits
- is done just by pretending it is already truncated. */
-#define TRULY_NOOP_TRUNCATION(OUTPREC, INPREC) 1
+/* Nonzero if access to memory by byte is no faster than by word. */
+#define SLOW_BYTE_ACCESS 1
/* Give a comparison code (EQ, NE etc) and the first operand of a COMPARE,
- return the mode to be used for the comparison. For floating-point, CCFPmode
- should be used. */
+ return the mode to be used for the comparison. */
-#define SELECT_CC_MODE(OP,X,Y) \
-(GET_MODE_CLASS(GET_MODE(X)) == MODE_FLOAT? CCFPmode : CCmode)
+#define SELECT_CC_MODE(OP,X,Y) pdp11_cc_mode (OP, X, Y)
+
+/* Enable compare elimination pass. */
+#undef TARGET_FLAGS_REGNUM
+#define TARGET_FLAGS_REGNUM CC_REGNUM
+
+/* Specify the CC registers. TODO: is this for "type 1" CC handling only? */
+#undef TARGET_FIXED_CONDITION_CODE_REGS
+#define TARGET_FIXED_CONDITION_CODE_REGS pdp11_fixed_cc_regs
/* Specify the machine mode that pointers have.
After generation of rtl, the compiler makes no further distinction
but a CALL with constant address is cheap. */
/* #define NO_FUNCTION_CSE */
-\f
-/* cost of moving one register class to another */
-#define REGISTER_MOVE_COST(MODE, CLASS1, CLASS2) \
- register_move_cost (CLASS1, CLASS2)
-
-/* Tell emit-rtl.c how to initialize special values on a per-function base. */
-extern int optimize;
-extern struct rtx_def *cc0_reg_rtx;
-
-#define CC_STATUS_MDEP rtx
-
-#define CC_STATUS_MDEP_INIT (cc_status.mdep = 0)
-\f
-/* Tell final.c how to eliminate redundant test instructions. */
-
-/* Here we define machine-dependent flags and fields in cc_status
- (see `conditions.h'). */
-
-#define CC_IN_FPU 04000
-
-/* Do UPDATE_CC if EXP is a set, used in
- NOTICE_UPDATE_CC
-
- floats only do compare correctly, else nullify ...
-
- get cc0 out soon ...
-*/
-
-/* Store in cc_status the expressions
- that the condition codes will describe
- after execution of an instruction whose pattern is EXP.
- Do not alter them if the instruction would not alter the cc's. */
-
-#define NOTICE_UPDATE_CC(EXP, INSN) \
-{ if (GET_CODE (EXP) == SET) \
- { \
- notice_update_cc_on_set(EXP, INSN); \
- } \
- else if (GET_CODE (EXP) == PARALLEL \
- && GET_CODE (XVECEXP (EXP, 0, 0)) == SET) \
- { \
- notice_update_cc_on_set(XVECEXP (EXP, 0, 0), INSN); \
- } \
- else if (GET_CODE (EXP) == CALL) \
- { /* all bets are off */ CC_STATUS_INIT; } \
- if (cc_status.value1 && GET_CODE (cc_status.value1) == REG \
- && cc_status.value2 \
- && reg_overlap_mentioned_p (cc_status.value1, cc_status.value2)) \
- { \
- printf ("here!\n"); \
- cc_status.value2 = 0; \
- } \
-}
\f
/* Control the assembler format that we output. */
/* Output before read-only data. */
-#define TEXT_SECTION_ASM_OP "\t.text\n"
+#define TEXT_SECTION_ASM_OP \
+ ((TARGET_DEC_ASM) ? "\t.psect\tcode,i,ro,con" : "\t.text")
/* Output before writable data. */
-#define DATA_SECTION_ASM_OP "\t.data\n"
+#define DATA_SECTION_ASM_OP \
+ ((TARGET_DEC_ASM) ? "\t.psect\tdata,d,rw,con" : "\t.data")
+
+/* Output before read-only data. Same as read-write data for non-DEC
+ assemblers because they don't know about .rodata. */
+
+#define READONLY_DATA_SECTION_ASM_OP \
+ ((TARGET_DEC_ASM) ? "\t.psect\trodata,d,ro,con" : "\t.data")
/* How to refer to registers in assembler output.
This sequence is indexed by compiler's hard-register-number (see above). */
#define REGISTER_NAMES \
{"r0", "r1", "r2", "r3", "r4", "r5", "sp", "pc", \
- "ac0", "ac1", "ac2", "ac3", "ac4", "ac5" }
+ "ac0", "ac1", "ac2", "ac3", "ac4", "ac5", "ap", "cc", \
+ "fcc" }
/* Globalizing directive for a label. */
-#define GLOBAL_ASM_OP "\t.globl "
+#define GLOBAL_ASM_OP "\t.globl\t"
-/* The prefix to add to user-visible assembler symbols. */
+/* The prefix to add to user-visible assembler symbols. For the DEC
+ assembler case, this is not used. */
#define USER_LABEL_PREFIX "_"
+/* Line separators. */
+
+#define IS_ASM_LOGICAL_LINE_SEPARATOR(C, STR) \
+ ((C) == '\n' || (!TARGET_DEC_ASM && (C) == ';'))
+
/* This is how to store into the string LABEL
the symbol_ref name of an internal numbered label where
PREFIX is the class of label and NUM is the number within the class.
This is suitable for output with `assemble_name'. */
-#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
- sprintf (LABEL, "*%s_%lu", PREFIX, (unsigned long)(NUM))
+#define ASM_GENERATE_INTERNAL_LABEL(LABEL,PREFIX,NUM) \
+ pdp11_gen_int_label ((LABEL), (PREFIX), (NUM))
+
+/* Emit a string. */
#define ASM_OUTPUT_ASCII(FILE, P, SIZE) \
output_ascii (FILE, P, SIZE)
-/* This is how to output an element of a case-vector that is absolute. */
+/* Print a label reference, with _ prefix if not DEC. */
-#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
- fprintf (FILE, "\t%sL_%d\n", TARGET_UNIX_ASM ? "" : ".word ", VALUE)
+#define ASM_OUTPUT_LABELREF(STREAM, NAME) \
+ pdp11_output_labelref ((STREAM), (NAME))
+
+/* Equate a symbol to an expression. */
-/* This is how to output an element of a case-vector that is relative.
- Don't define this if it is not supported. */
+#define ASM_OUTPUT_DEF(STREAM, NAME, VALUE) \
+ pdp11_output_def (STREAM, NAME, VALUE)
-/* #define ASM_OUTPUT_ADDR_DIFF_ELT(FILE, VALUE, REL) */
+/* Mark a reference to an external symbol. Needed for DEC assembler. */
-/* This is how to output an assembler line
- that says to advance the location counter
- to a multiple of 2**LOG bytes.
+#define ASM_OUTPUT_EXTERNAL(STREAM, DECL, NAME) \
+ if (TARGET_DEC_ASM) \
+ fprintf ((STREAM), "\t.globl\t%s\n", (NAME))
- who needs this????
+#define ASM_OUTPUT_SOURCE_FILENAME(STREAM, NAME) \
+ if (TARGET_DEC_ASM) \
+ fprintf ((STREAM), ".title\t%s\n", (NAME))
+
+/* This is how to output an element of a case-vector that is absolute. */
+
+#define ASM_OUTPUT_ADDR_VEC_ELT(FILE, VALUE) \
+ pdp11_output_addr_vec_elt (FILE, VALUE)
+
+/* This is how to output an assembler line that says to advance the
+ location counter to a multiple of 2**LOG bytes. Only values 0 and
+ 1 should appear, but due to PR87795 larger values (which are not
+ supported) can also appear. So we treat all alignment of LOG >= 1
+ as word (2 byte) alignment.
*/
#define ASM_OUTPUT_ALIGN(FILE,LOG) \
- switch (LOG) \
- { \
- case 0: \
- break; \
- case 1: \
- fprintf (FILE, "\t.even\n"); \
- break; \
- default: \
- abort (); \
- }
+ if (LOG != 0) \
+ fprintf (FILE, "\t.even\n")
#define ASM_OUTPUT_SKIP(FILE,SIZE) \
- fprintf (FILE, "\t.=.+ %#ho\n", (unsigned short)(SIZE))
+ do { \
+ if (TARGET_DEC_ASM) \
+ fprintf (FILE, "\t.blkb\t%o\n", (int) ((SIZE) & 0xffff)); \
+ else \
+ fprintf (FILE, "\t.=.+ %#o\n", (int) ((SIZE) & 0xffff)); \
+ } while (0)
/* This says how to output an assembler line
to define a global common symbol. */
-#define ASM_OUTPUT_COMMON(FILE, NAME, SIZE, ROUNDED) \
-( fprintf ((FILE), ".globl "), \
- assemble_name ((FILE), (NAME)), \
- fprintf ((FILE), "\n"), \
- assemble_name ((FILE), (NAME)), \
- fprintf ((FILE), ": .=.+ %#ho\n", (unsigned short)(ROUNDED)) \
-)
+#define ASM_OUTPUT_ALIGNED_COMMON(FILE, NAME, SIZE, ALIGN) \
+ pdp11_asm_output_var (FILE, NAME, SIZE, ALIGN, true)
/* This says how to output an assembler line
to define a local common symbol. */
-#define ASM_OUTPUT_LOCAL(FILE, NAME, SIZE, ROUNDED) \
-( assemble_name ((FILE), (NAME)), \
- fprintf ((FILE), ":\t.=.+ %#ho\n", (unsigned short)(ROUNDED)))
-
-/* Print operand X (an rtx) in assembler syntax to file FILE.
- CODE is a letter or dot (`z' in `%z0') or 0 if no letter was specified.
- For `%' followed by punctuation, CODE is the punctuation and X is null.
-
-*/
-
+#define ASM_OUTPUT_ALIGNED_LOCAL(FILE, NAME, SIZE, ALIGN) \
+ pdp11_asm_output_var (FILE, NAME, SIZE, ALIGN, false)
-#define PRINT_OPERAND(FILE, X, CODE) \
-{ if (CODE == '#') fprintf (FILE, "#"); \
- else if (GET_CODE (X) == REG) \
- fprintf (FILE, "%s", reg_names[REGNO (X)]); \
- else if (GET_CODE (X) == MEM) \
- output_address (XEXP (X, 0)); \
- else if (GET_CODE (X) == CONST_DOUBLE && GET_MODE (X) != SImode) \
- { char buf[30]; \
- real_to_decimal (buf, CONST_DOUBLE_REAL_VALUE (X), sizeof (buf), 0, 1); \
- fprintf (FILE, "$0F%s", buf); } \
- else { putc ('$', FILE); output_addr_const_pdp11 (FILE, X); }}
-\f
/* Print a memory address as an operand to reference that memory location. */
#define PRINT_OPERAND_ADDRESS(FILE, ADDR) \
- print_operand_address (FILE, ADDR)
-
-#define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
-( \
- fprintf (FILE, "\tmov %s, -(sp)\n", reg_names[REGNO]) \
-)
-
-#define ASM_OUTPUT_REG_POP(FILE,REGNO) \
-( \
- fprintf (FILE, "\tmov (sp)+, %s\n", reg_names[REGNO]) \
-)
+ print_operand_address (FILE, ADDR)
-/* trampoline - how should i do it in separate i+d ?
- have some allocate_trampoline magic???
+#define ASM_OUTPUT_REG_PUSH(FILE,REGNO) \
+ fprintf (FILE, "\tmov\t%s,-(sp)\n", reg_names[REGNO])
- the following should work for shared I/D: */
-
-/* lets see whether this works as trampoline:
-MV #STATIC, $4 0x940Y 0x0000 <- STATIC; Y = STATIC_CHAIN_REGNUM
-JMP FUNCTION 0x0058 0x0000 <- FUNCTION
-*/
-
-#define TRAMPOLINE_TEMPLATE(FILE) \
-{ \
- if (TARGET_SPLIT) \
- abort(); \
- \
- assemble_aligned_integer (2, GEN_INT (0x9400+STATIC_CHAIN_REGNUM)); \
- assemble_aligned_integer (2, const0_rtx); \
- assemble_aligned_integer (2, GEN_INT(0x0058)); \
- assemble_aligned_integer (2, const0_rtx); \
-}
+#define ASM_OUTPUT_REG_POP(FILE,REGNO) \
+ fprintf (FILE, "\tmov\t(sp)+,%s\n", reg_names[REGNO])
#define TRAMPOLINE_SIZE 8
#define TRAMPOLINE_ALIGNMENT 16
-/* Emit RTL insns to initialize the variable parts of a trampoline.
- FNADDR is an RTX for the address of the function's pure code.
- CXT is an RTX for the static chain value for the function. */
-
-#define INITIALIZE_TRAMPOLINE(TRAMP,FNADDR,CXT) \
-{ \
- if (TARGET_SPLIT) \
- abort(); \
- \
- emit_move_insn (gen_rtx_MEM (HImode, plus_constant (TRAMP, 2)), CXT); \
- emit_move_insn (gen_rtx_MEM (HImode, plus_constant (TRAMP, 6)), FNADDR); \
-}
-
-
-/* Some machines may desire to change what optimizations are
- performed for various optimization levels. This macro, if
- defined, is executed once just after the optimization level is
- determined and before the remainder of the command options have
- been parsed. Values set in this macro are used as the default
- values for the other command line options.
-
- LEVEL is the optimization level specified; 2 if -O2 is
- specified, 1 if -O is specified, and 0 if neither is specified. */
-
-#define OPTIMIZATION_OPTIONS(LEVEL,SIZE) \
-{ \
- if (LEVEL >= 3) \
- { \
- if (! SIZE) \
- flag_inline_functions = 1; \
- flag_omit_frame_pointer = 1; \
- /* flag_unroll_loops = 1; */ \
- } \
-}
-
-/* there is no point in avoiding branches on a pdp,
- since branches are really cheap - I just want to find out
- how much difference the BRANCH_COST macro makes in code */
-#define BRANCH_COST (TARGET_BRANCH_CHEAP ? 0 : 1)
-
+#define BRANCH_COST(speed_p, predictable_p) 1
#define COMPARE_FLAG_MODE HImode
+
+/* May be overridden by command option processing. */
+#define TARGET_HAVE_NAMED_SECTIONS false
+
+/* pdp11-unknown-aout target has no support of C99 runtime */
+#undef TARGET_LIBC_HAS_FUNCTION
+#define TARGET_LIBC_HAS_FUNCTION no_c99_libc_has_function