config: remove platform CONFIG_SYS_HZ definition part 2/2

[people/ms/u-boot.git] / include / configs / km / keymile-common.h

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
index 05480d48aedf0b730992f77617e21b813bfa802f..2a15ad469b102b91362c040eef6d618fe7d9a699 100644 (file)
--- a/include/configs/km/keymile-common.h
+++ b/include/configs/km/keymile-common.h
@@ -2,32 +2,12 @@
  * (C) Copyright 2008-2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_KEYMILE_H
 #define __CONFIG_KEYMILE_H
 
-/* Do boardspecific init for all boards */
-#define CONFIG_BOARD_EARLY_INIT_R
-#define CONFIG_LAST_STAGE_INIT
-
 #define CONFIG_BOOTCOUNT_LIMIT
 
 /*
@@ -38,6 +18,7 @@
 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_DEFAULTENV_VARS
+#define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_ECHO
 #define CONFIG_CMD_IMMAP
 #define CONFIG_CMD_MII
@@ -58,7 +39,6 @@
  */
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_LONGHELP                    /* undef to save memory   */
-#define CONFIG_SYS_PROMPT              "=> "   /* Monitor Command Prompt */
 #if defined(CONFIG_CMD_KGDB)
 #define CONFIG_SYS_CBSIZE              1024    /* Console I/O Buffer Size */
 #else
@@ -74,19 +54,12 @@
 
 #define CONFIG_SYS_ALT_MEMTEST         /* memory test, takes time */
 
-#define CONFIG_SYS_HZ                  1000    /* decr. freq: 1 ms ticks */
-
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
 
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 
-#define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS         1
-#define CONFIG_SYS_I2C_INIT_BOARD
-#define CONFIG_I2C_MUX
-
 /* Support the IVM EEprom */
 #define        CONFIG_SYS_IVM_EEPROM_ADR       0x50
 #define CONFIG_SYS_IVM_EEPROM_MAX_LEN  0x400
@@ -102,8 +75,6 @@
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_HOSTNAME
 
-#define CONFIG_SYS_MALLOC_LEN          (4 * 1024 * 1024)
-
 /* UBI Support for all Keymile boards */
 #define CONFIG_CMD_UBI
 #define CONFIG_RBTREE
@@ -148,6 +119,14 @@
        "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
 #endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
 
+#ifdef CONFIG_NAND_ECC_BCH
+#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
+#define CONFIG_KM_ECC_MODE    " eccmode=bch"
+#else
+#define CONFIG_KM_UIMAGE_NAME "uImage\0"
+#define CONFIG_KM_ECC_MODE
+#endif
+
 /*
  * boottargets
  * - set 'subbootcmds'
@@ -181,9 +160,10 @@
        "add_default="                                                  \
                "setenv bootargs ${bootargs} "                          \
                "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off3"                           \
+               ":${hostname}:${netdev}:off:"                           \
                " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"        \
                " mem=${kernelmem} init=${init}"                        \
+               CONFIG_KM_ECC_MODE                                      \
                " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
                " " CONFIG_KM_UBI_LINUX_MTD " "                         \
                CONFIG_KM_DEF_BOOT_ARGS_CPU                             \
@@ -210,9 +190,10 @@
  */
 #define CONFIG_KM_DEF_ENV_FLASH_BOOT                                   \
        "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"           \
-       "cramfsloadkernel=cramfsload ${load_addr_r} uImage\0"           \
+       "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"        \
        "ubicopy=ubi read "__stringify(CONFIG_KM_CRAMFS_ADDR)           \
                        " bootfs${boot_bank}\0"                         \
+       "uimage=" CONFIG_KM_UIMAGE_NAME                                 \
        CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
 
 /*
@@ -253,9 +234,6 @@
        "load=tftpboot ${load_addr_r} ${u-boot}\0"                      \
        "mtdids=" MTDIDS_DEFAULT "\0"                                   \
        "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
-       "stderr=serial\0"                                               \
-       "stdin=serial\0"                                                \
-       "stdout=serial\0"                                               \
        ""
 #endif /* CONFIG_KM_DEF_ENV */