###############################################################################
# #
# IPFire.org - A linux based firewall #
-# Copyright (C) 2007 Michael Tremer & Christian Schmidt #
+# Copyright (C) 2007-2012 IPFire Team <info@ipfire.org> #
# #
# This program is free software: you can redistribute it and/or modify #
# it under the terms of the GNU General Public License as published by #
###############################################################################
# Installation Details
###############################################################################
-IMGinst := /install/images/$(SNAME)-$(VERSION).1gb-ext2.$(MACHINE)-$(ED)-core$(CORE).img
-IMGinsts := /install/images/$(SNAME)-$(VERSION).1gb-ext2-scon.$(MACHINE)-$(ED)-core$(CORE).img
+IMGinst := /install/images/$(SNAME)-$(VERSION).1gb-ext4.$(MACHINE)-full-core$(CORE).img
+IMGinsts := /install/images/$(SNAME)-$(VERSION).1gb-ext4-scon.$(MACHINE)-full-core$(CORE).img
MNThdd := /install/harddisk
IMGpart := /install/images/part_area
IMGboot := /install/images/bootfs
# don't change SIZEboot this without checking Image size
-SIZEboot := 20
+SIZEboot := 64
IMGroot := /install/images/rootfs
-SIZEroot := 500
-IMGvar := /install/images/varfs
-SIZEvar := 430
+SIZEroot := 600
$(TARGET) : $(patsubst %,$(DIR_DL)/%,$(objects))
- rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) && mkdir -p $(MNThdd)
+ rm -rf $(MNThdd) $(IMGinst) $(IMGpart) $(IMGboot) $(IMGroot) && mkdir -p $(MNThdd)
# Create first 32 sectors of image
dd bs=1k if=/dev/zero of=$(IMGpart) count=16
# Create images for filesystems
- dd bs=1K if=/dev/zero of=$(IMGboot) count=20464 # 20MB-16K
+ dd bs=1K if=/dev/zero of=$(IMGboot) count=65520 # 64MB-16K
dd bs=1M if=/dev/zero of=$(IMGroot) count=$(SIZEroot)
- dd bs=1M if=/dev/zero of=$(IMGvar) count=$(SIZEvar)
# Format them
+ifeq "$(MACHINE_TYPE)" "arm"
+ mkfs.vfat $(IMGboot)
+else
mkfs.ext2 -F $(IMGboot)
- mkfs.ext2 -F $(IMGroot)
- mkfs.ext2 -F $(IMGvar)
+endif
+ mkfs.ext4 -O ^has_journal,extent -F $(IMGroot)
+
+ # Most systems that use Flashimages has no RTC at boot
+ # so the interval check should disables
+ tune2fs -i0 $(IMGroot)
# Mount Images
mount -o loop $(IMGroot) $(MNThdd)
mkdir $(MNThdd)/var
mkdir $(MNThdd)/var/log
mount -o loop $(IMGboot) $(MNThdd)/boot
- mount -o loop $(IMGvar) $(MNThdd)/var
+
+ # Install MLO and uboot first
+ifeq "$(MACHINE_TYPE)" "arm"
+ cp -v /boot/MLO $(MNThdd)/boot/
+ cp -v /boot/u-boot.bin $(MNThdd)/boot/
+ sync
+ umount $(MNThdd)/boot
+ mount -o loop $(IMGboot) $(MNThdd)/boot
+endif
# Install IPFire
- tar -C $(MNThdd)/ -xvf /install/cdrom/$(SNAME)-$(VERSION).tlz --lzma
+ tar -C $(MNThdd)/ -xvaf /install/cdrom/$(SNAME)-$(VERSION).tlz
echo "LANGUAGE=en" >> $(MNThdd)/var/ipfire/main/settings
echo "HOSTNAME=$(SNAME)" >> $(MNThdd)/var/ipfire/main/settings
echo "THEME=ipfire" >> $(MNThdd)/var/ipfire/main/settings
- touch $(MNThdd)/lib/modules/$(KVER)-ipfire/modules.dep
- mv $(MNThdd)/bin/uname.bak $(MNThdd)/bin/uname
+ -touch $(MNThdd)/lib/modules/$(KVER)-ipfire/modules.dep
mkdir $(MNThdd)/proc
mount --bind /proc $(MNThdd)/proc
mount --bind /dev $(MNThdd)/dev
mount --bind /sys $(MNThdd)/sys
chroot $(MNThdd) /usr/bin/perl -e "require '/var/ipfire/lang.pl'; &Lang::BuildCacheLang"
+ sed -i -e "s|DEVICE1|UUID=$$(blkid -sUUID $(IMGboot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
+ifeq "$(MACHINE_TYPE)" "arm"
+ # ARM flash images have a VFAT partition for /boot.
+ sed -i -e "s|ext2|vfat|" $(MNThdd)/etc/fstab
+endif
+ sed -i -e "s|DEVICE2|#DEVICE2|g" $(MNThdd)/etc/fstab
+ sed -i -e "s|DEVICE3|UUID=$$(blkid -sUUID $(IMGroot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
+ sed -i -e "s|DEVICE4|#DEVICE4|g" $(MNThdd)/etc/fstab
+ sed -i -e "s|FSTYPE|ext4|g" $(MNThdd)/etc/fstab
+
+ifneq "$(MACHINE_TYPE)" "arm"
sed -i -e "s|MOUNT|ro|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s|KVER|$(KVER)|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s|ROOT|UUID=$$(blkid -sUUID $(IMGroot) | cut -d'"' -f2)|g" $(MNThdd)/boot/grub/grub.conf
ln -s grub.conf $(MNThdd)/boot/grub/menu.lst
- sed -i -e "s|DEVICE1|UUID=$$(blkid -sUUID $(IMGboot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
- sed -i -e "s|DEVICE2|#DEVICE2|g" $(MNThdd)/etc/fstab
- sed -i -e "s|DEVICE3|UUID=$$(blkid -sUUID $(IMGroot) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
- sed -i -e "s|DEVICE4|UUID=$$(blkid -sUUID $(IMGvar) | cut -d'"' -f2)|g" $(MNThdd)/etc/fstab
- sed -i -e "s|FSTYPE|ext2|g" $(MNThdd)/etc/fstab
# Copy grub files manually
- cp -f $(MNThdd)/usr/share/grub/i386-pc/* $(MNThdd)/boot/grub/
+ cp -f $(MNThdd)/usr/lib/grub/i386-pc/* $(MNThdd)/boot/grub/
+endif
+
+ # Setup symlink for partresize at first boot...
+ ln -sf ../init.d/partresize $(MNThdd)/etc/rc.d/rcsysinit.d/S25partresize
+ # Setup symlink for fsresize at second boot...
+ ln -sf ../init.d/fsresize $(MNThdd)/etc/rc.d/rcsysinit.d/S42fsresize
# Unmount
umount $(MNThdd)/proc
umount $(MNThdd)/dev
umount $(MNThdd)/sys
umount $(MNThdd)/boot
- umount $(MNThdd)/var
umount $(MNThdd)
- # zerofree the ext3 images to get better compression
+ # zerofree the ext2 images to get better compression
+ifneq "$(MACHINE_TYPE)" "arm"
zerofree $(IMGboot)
+ -fsck.ext2 -f -y $(IMGboot)
+ fsck.ext2 -f -y $(IMGboot)
+endif
zerofree $(IMGroot)
- zerofree $(IMGvar)
+ -fsck.ext4 -f -y $(IMGroot)
+ fsck.ext4 -f -y $(IMGroot)
# Cat to an image
- cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinst)
+ cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinst)
+
# Write Partition table
- echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \
+ifneq "$(MACHINE_TYPE)" "arm"
+ echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
| sfdisk -D -uM -H 64 -S 32 $(IMGinst)
+else
+ echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
+ | sfdisk -D -uM -H 64 -S 32 $(IMGinst)
+endif
+ifneq "$(MACHINE_TYPE)" "arm"
# Install grub
echo "device (hd0) $(IMGinst)" > /tmp/grubinst.tmp
echo "root (hd0,0)" >> /tmp/grubinst.tmp
echo "quit" >> /tmp/grubinst.tmp
grub < /tmp/grubinst.tmp
rm -f /tmp/grubinst.tmp
+endif
# Compress Image
gzip -f9 $(IMGinst)
mount -o loop $(IMGroot) $(MNThdd)
mount -o loop $(IMGboot) $(MNThdd)/boot
+ifneq "$(MACHINE_TYPE)" "arm"
sed -i -e "s|splashimage|#splashimage|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s|#serial|serial|g" $(MNThdd)/boot/grub/grub.conf
sed -i -e "s|#terminal|terminal|g" $(MNThdd)/boot/grub/grub.conf
- sed -i -e "s| panic=10 | console=ttyS0,38400n8 panic=10 |g" $(MNThdd)/boot/grub/grub.conf
+ sed -i -e "s| panic=10 | console=ttyS0,115200n8 panic=10 |g" $(MNThdd)/boot/grub/grub.conf
+else
+ sed -i -e "s| console=tty1 | console=ttyAMA0,115200n8 |g" $(MNThdd)/boot/cmdline.txt
+ sed -i -e "s| console=tty1 omapfb.mode=dvi:800x600MR-16@60 | console=ttyO2,115200n8 |g" $(MNThdd)/boot/boot.script
+ cd $(MNThdd)/boot && ./convert_bootscript
+endif
sed -i -e "s|1:2345:respawn:|#1:2345:respawn:|g" $(MNThdd)/etc/inittab
sed -i -e "s|2:2345:respawn:|#2:2345:respawn:|g" $(MNThdd)/etc/inittab
umount $(MNThdd)
# zerofree the ext3 images to get better compression
+ifneq "$(MACHINE_TYPE)" "arm"
zerofree $(IMGboot)
+ -fsck.ext2 -f -y $(IMGboot)
+ fsck.ext2 -f -y $(IMGboot)
+endif
zerofree $(IMGroot)
- zerofree $(IMGvar)
+ -fsck.ext4 -f -y $(IMGroot)
+ fsck.ext4 -f -y $(IMGroot)
# Cat to an image
- cat $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar) > $(IMGinsts)
- rm -vf $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar)
+ cat $(IMGpart) $(IMGboot) $(IMGroot) > $(IMGinsts)
+ rm -vf $(IMGpart) $(IMGboot) $(IMGroot)
+
# Write Partition table
- echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,$(SIZEvar),L\n" \
+ifneq "$(MACHINE_TYPE)" "arm"
+ echo -e ",$(SIZEboot),L,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
| sfdisk -D -uM -H 64 -S 32 $(IMGinsts)
+else
+ echo -e ",$(SIZEboot),c,*\n,0,0\n,$(SIZEroot),L\n,0,0\n" \
+ | sfdisk -D -uM -H 64 -S 32 $(IMGinsts)
+endif
+ifneq "$(MACHINE_TYPE)" "arm"
# Install grub
echo "device (hd0) $(IMGinsts)" > /tmp/grubinst.tmp
echo "root (hd0,0)" >> /tmp/grubinst.tmp
echo "quit" >> /tmp/grubinst.tmp
grub < /tmp/grubinst.tmp
rm -f /tmp/grubinst.tmp
+endif
# Compress Image
gzip -f9 $(IMGinsts)
- rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot) $(IMGvar)
-
+ rm -rf $(MNThdd) $(IMGpart) $(IMGboot) $(IMGroot)