acinclude.m4 (GLIBCPP_CONFIGURE): Split out GLIBCPP_TOPREL_CONFIGURE.

[thirdparty/gcc.git] / libf2c / configure

diff --git a/libf2c/configure b/libf2c/configure
index c55d97b2864077deddb67b1695f05e48a9acff37..afdb83927d4824676d1879c775ca9394dfea7798 100755 (executable)
--- a/libf2c/configure
+++ b/libf2c/configure
@@ -49,7 +49,6 @@ program_suffix=NONE
 program_transform_name=s,x,x,
 silent=
 site=
-sitefile=
 srcdir=
 target=NONE
 verbose=
@@ -164,7 +163,6 @@ Configuration:
   --help                  print this message
   --no-create             do not create output files
   --quiet, --silent       do not print \`checking...' messages
-  --site-file=FILE        use FILE as the site file
   --version               print the version of autoconf that created configure
 Directory and file names:
   --prefix=PREFIX         install architecture-independent files in PREFIX
@@ -335,11 +333,6 @@ EOF
   -site=* | --site=* | --sit=*)
     site="$ac_optarg" ;;
 
-  -site-file | --site-file | --site-fil | --site-fi | --site-f)
-    ac_prev=sitefile ;;
-  -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
-    sitefile="$ac_optarg" ;;
-
   -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
     ac_prev=srcdir ;;
   -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
@@ -505,16 +498,12 @@ fi
 srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
 
 # Prefer explicitly selected file to automatically selected ones.
-if test -z "$sitefile"; then
-  if test -z "$CONFIG_SITE"; then
-    if test "x$prefix" != xNONE; then
-      CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
-    else
-      CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
-    fi
+if test -z "$CONFIG_SITE"; then
+  if test "x$prefix" != xNONE; then
+    CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+  else
+    CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
   fi
-else
-  CONFIG_SITE="$sitefile"
 fi
 for ac_site_file in $CONFIG_SITE; do
   if test -r "$ac_site_file"; then
@@ -560,8 +549,39 @@ fi
 # exported.
 ORIGINAL_LD_FOR_MULTILIBS=$LD
 
+
+    # Check whether --enable-multilib or --disable-multilib was given.
+if test "${enable_multilib+set}" = set; then
+  enableval="$enable_multilib"
+  case "${enableval}" in
+    yes) multilib=yes ;;
+    no)  multilib=no ;;
+    *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
+   esac
+else
+  multilib=yes
+fi
+
+# When building with srcdir == objdir, links to the source files will
+# be created in directories within the target_subdir.  We have to
+# adjust toplevel_srcdir accordingly, so that configure finds
+# install-sh and other auxiliary files that live in the top-level
+# source directory.
+if test "${srcdir}" = "."; then
+  if test -z "${with_target_subdir}"; then
+    toprel=".."
+  else
+    if test "${with_target_subdir}" != "."; then
+      toprel="${with_multisrctop}../.."
+    else
+      toprel="${with_multisrctop}.."
+    fi
+  fi
+else
+  toprel=".."
+fi
 ac_aux_dir=
-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
+for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
   if test -f $ac_dir/install-sh; then
     ac_aux_dir=$ac_dir
     ac_install_sh="$ac_aux_dir/install-sh -c"
@@ -573,12 +593,16 @@ for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do
   fi
 done
 if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." 1>&2; exit 1; }
+  { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
 fi
 ac_config_guess=$ac_aux_dir/config.guess
 ac_config_sub=$ac_aux_dir/config.sub
 ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
 
+toplevel_srcdir=\${top_srcdir}/$toprel
+
+
+
 
 # Do some error checking and defaulting for the host and target type.
 # The inputs are:
@@ -607,7 +631,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
 echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:611: checking host system type" >&5
+echo "configure:635: checking host system type" >&5
 
 host_alias=$host
 case "$host_alias" in
@@ -628,7 +652,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$host" 1>&6
 
 echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:632: checking target system type" >&5
+echo "configure:656: checking target system type" >&5
 
 target_alias=$target
 case "$target_alias" in
@@ -646,7 +670,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
 echo "$ac_t""$target" 1>&6
 
 echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:650: checking build system type" >&5
+echo "configure:674: checking build system type" >&5
 
 build_alias=$build
 case "$build_alias" in
@@ -678,12 +702,12 @@ else
 fi
 
 echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
-echo "configure:682: checking for Cygwin environment" >&5
+echo "configure:706: checking for Cygwin environment" >&5
 if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 687 "configure"
+#line 711 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -694,7 +718,7 @@ int main() {
 return __CYGWIN__;
 ; return 0; }
 EOF
-if { (eval echo configure:698: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:722: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_cygwin=yes
 else
@@ -711,19 +735,19 @@ echo "$ac_t""$ac_cv_cygwin" 1>&6
 CYGWIN=
 test "$ac_cv_cygwin" = yes && CYGWIN=yes
 echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
-echo "configure:715: checking for mingw32 environment" >&5
+echo "configure:739: checking for mingw32 environment" >&5
 if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 720 "configure"
+#line 744 "configure"
 #include "confdefs.h"
 
 int main() {
 return __MINGW32__;
 ; return 0; }
 EOF
-if { (eval echo configure:727: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:751: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_mingw32=yes
 else
@@ -740,58 +764,6 @@ echo "$ac_t""$ac_cv_mingw32" 1>&6
 MINGW32=
 test "$ac_cv_mingw32" = yes && MINGW32=yes
 
-    # Check whether --enable-multilib or --disable-multilib was given.
-if test "${enable_multilib+set}" = set; then
-  enableval="$enable_multilib"
-  case "${enableval}" in
-    yes) multilib=yes ;;
-    no)  multilib=no ;;
-    *)   { echo "configure: error: bad value ${enableval} for multilib option" 1>&2; exit 1; } ;;
-   esac
-else
-  multilib=yes
-fi
-
-# When building with srcdir == objdir, links to the source files will
-# be created in directories within the target_subdir.  We have to
-# adjust toplevel_srcdir accordingly, so that configure finds
-# install-sh and other auxiliary files that live in the top-level
-# source directory.
-if test "${srcdir}" = "."; then
-  if test -z "${with_target_subdir}"; then
-    toprel=".."
-  else
-    if test "${with_target_subdir}" != "."; then
-      toprel="${with_multisrctop}../.."
-    else
-      toprel="${with_multisrctop}.."
-    fi
-  fi
-else
-  toprel=".."
-fi
-ac_aux_dir=
-for ac_dir in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel; do
-  if test -f $ac_dir/install-sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install-sh -c"
-    break
-  elif test -f $ac_dir/install.sh; then
-    ac_aux_dir=$ac_dir
-    ac_install_sh="$ac_aux_dir/install.sh -c"
-    break
-  fi
-done
-if test -z "$ac_aux_dir"; then
-  { echo "configure: error: can not find install-sh or install.sh in ${srcdir}/$toprel $srcdir/${srcdir}/$toprel" 1>&2; exit 1; }
-fi
-ac_config_guess=$ac_aux_dir/config.guess
-ac_config_sub=$ac_aux_dir/config.sub
-ac_configure=$ac_aux_dir/configure # This should be Cygnus configure.
-
-toplevel_srcdir=\${top_srcdir}/$toprel
-
-
 # Export build and source directories.
 # These need to be absolute paths, yet at the same time need to
 # canonicalize only relative paths, because then amd will not unmount
@@ -810,7 +782,7 @@ esac
 # be 'cp -p' if linking isn't available.
 #ac_cv_prog_LN_S='cp -p'
 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6
-echo "configure:814: checking whether ln -s works" >&5
+echo "configure:786: checking whether ln -s works" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -866,7 +838,7 @@ fi
 # Extract the first word of "gcc", so it can be a program name with args.
 set dummy gcc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:870: checking for $ac_word" >&5
+echo "configure:842: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -896,7 +868,7 @@ if test -z "$CC"; then
   # Extract the first word of "cc", so it can be a program name with args.
 set dummy cc; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:900: checking for $ac_word" >&5
+echo "configure:872: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -945,7 +917,7 @@ fi
 fi
 
 echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:949: checking whether we are using GNU C" >&5
+echo "configure:921: checking whether we are using GNU C" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -954,7 +926,7 @@ else
   yes;
 #endif
 EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:958: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:930: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
   ac_cv_prog_gcc=yes
 else
   ac_cv_prog_gcc=no
@@ -969,7 +941,7 @@ if test $ac_cv_prog_gcc = yes; then
   ac_save_CFLAGS="$CFLAGS"
   CFLAGS=
   echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:973: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:945: checking whether ${CC-cc} accepts -g" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1000,7 +972,7 @@ fi
   # Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args.
 set dummy ${ac_tool_prefix}as; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1004: checking for $ac_word" >&5
+echo "configure:976: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1032,7 +1004,7 @@ fi
   # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ar; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1036: checking for $ac_word" >&5
+echo "configure:1008: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1064,7 +1036,7 @@ fi
   # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1068: checking for $ac_word" >&5
+echo "configure:1040: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1096,7 +1068,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1100: checking for $ac_word" >&5
+echo "configure:1072: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1140,7 +1112,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1144: checking for a BSD compatible install" >&5
+echo "configure:1116: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1208,7 +1180,7 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
     
 
 echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:1212: checking for executable suffix" >&5
+echo "configure:1184: checking for executable suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1218,10 +1190,10 @@ else
   rm -f conftest*
   echo 'int main () { return 0; }' > conftest.$ac_ext
   ac_cv_exeext=
-  if { (eval echo configure:1222: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+  if { (eval echo configure:1194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
     for file in conftest.*; do
       case $file in
-      *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+      *.c | *.o | *.obj) ;;
       *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
       esac
     done
@@ -1248,13 +1220,13 @@ glibcpp_toolexeclibdir=no
 glibcpp_prefixdir=${prefix}
 
 echo $ac_n "checking for interface version number""... $ac_c" 1>&6
-echo "configure:1252: checking for interface version number" >&5
+echo "configure:1224: checking for interface version number" >&5
 libstdcxx_interface=$INTERFACE
 echo "$ac_t""$libstdcxx_interface" 1>&6
 
 # Process the option "--enable-version-specific-runtime-libs"
 echo $ac_n "checking for --enable-version-specific-runtime-libs""... $ac_c" 1>&6
-echo "configure:1258: checking for --enable-version-specific-runtime-libs" >&5
+echo "configure:1230: checking for --enable-version-specific-runtime-libs" >&5
 # Check whether --enable-version-specific-runtime-libs or --disable-version-specific-runtime-libs was given.
 if test "${enable_version_specific_runtime_libs+set}" = set; then
   enableval="$enable_version_specific_runtime_libs"
@@ -1308,7 +1280,7 @@ fi
 compiler_name=f771
 rm -f skip-this-dir
 echo $ac_n "checking if compiler $compiler_name has been built""... $ac_c" 1>&6
-echo "configure:1312: checking if compiler $compiler_name has been built" >&5
+echo "configure:1284: checking if compiler $compiler_name has been built" >&5
 if eval "test \"`echo '$''{'g77_cv_compiler_exists'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1416,7 +1388,7 @@ ac_prog=ld
 if test "$GCC" = yes; then
   # Check if gcc -print-prog-name=ld gives a path.
   echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6
-echo "configure:1420: checking for ld used by GCC" >&5
+echo "configure:1392: checking for ld used by GCC" >&5
   case $host in
   *-*-mingw*)
     # gcc leaves a trailing carriage return which upsets mingw
@@ -1446,10 +1418,10 @@ echo "configure:1420: checking for ld used by GCC" >&5
   esac
 elif test "$with_gnu_ld" = yes; then
   echo $ac_n "checking for GNU ld""... $ac_c" 1>&6
-echo "configure:1450: checking for GNU ld" >&5
+echo "configure:1422: checking for GNU ld" >&5
 else
   echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6
-echo "configure:1453: checking for non-GNU ld" >&5
+echo "configure:1425: checking for non-GNU ld" >&5
 fi
 if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1484,7 +1456,7 @@ else
 fi
 test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; }
 echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6
-echo "configure:1488: checking if the linker ($LD) is GNU ld" >&5
+echo "configure:1460: checking if the linker ($LD) is GNU ld" >&5
 if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1501,7 +1473,7 @@ with_gnu_ld=$lt_cv_prog_gnu_ld
 
 
 echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6
-echo "configure:1505: checking for $LD option to reload object files" >&5
+echo "configure:1477: checking for $LD option to reload object files" >&5
 if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1513,7 +1485,7 @@ reload_flag=$lt_cv_ld_reload_flag
 test -n "$reload_flag" && reload_flag=" $reload_flag"
 
 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6
-echo "configure:1517: checking for BSD-compatible nm" >&5
+echo "configure:1489: checking for BSD-compatible nm" >&5
 if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1551,7 +1523,7 @@ NM="$lt_cv_path_NM"
 echo "$ac_t""$NM" 1>&6
 
 echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6
-echo "configure:1555: checking how to recognise dependant libraries" >&5
+echo "configure:1527: checking how to recognise dependant libraries" >&5
 if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1715,13 +1687,13 @@ file_magic_cmd=$lt_cv_file_magic_cmd
 deplibs_check_method=$lt_cv_deplibs_check_method
 
 echo $ac_n "checking for object suffix""... $ac_c" 1>&6
-echo "configure:1719: checking for object suffix" >&5
+echo "configure:1691: checking for object suffix" >&5
 if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   rm -f conftest*
 echo 'int i = 1;' > conftest.$ac_ext
-if { (eval echo configure:1725: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1697: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   for ac_file in conftest.*; do
     case $ac_file in
     *.c) ;;
@@ -1745,7 +1717,7 @@ case $deplibs_check_method in
 file_magic*)
   if test "$file_magic_cmd" = '$MAGIC_CMD'; then
     echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6
-echo "configure:1749: checking for ${ac_tool_prefix}file" >&5
+echo "configure:1721: checking for ${ac_tool_prefix}file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1807,7 +1779,7 @@ fi
 if test -z "$lt_cv_path_MAGIC_CMD"; then
   if test -n "$ac_tool_prefix"; then
     echo $ac_n "checking for file""... $ac_c" 1>&6
-echo "configure:1811: checking for file" >&5
+echo "configure:1783: checking for file" >&5
 if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1878,7 +1850,7 @@ esac
 # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args.
 set dummy ${ac_tool_prefix}ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1882: checking for $ac_word" >&5
+echo "configure:1854: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1910,7 +1882,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1914: checking for $ac_word" >&5
+echo "configure:1886: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1945,7 +1917,7 @@ fi
 # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args.
 set dummy ${ac_tool_prefix}strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1949: checking for $ac_word" >&5
+echo "configure:1921: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1977,7 +1949,7 @@ if test -n "$ac_tool_prefix"; then
   # Extract the first word of "strip", so it can be a program name with args.
 set dummy strip; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1981: checking for $ac_word" >&5
+echo "configure:1953: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2044,8 +2016,8 @@ test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
 case $host in
 *-*-irix6*)
   # Find out which ABI we are using.
-  echo '#line 2048 "configure"' > conftest.$ac_ext
-  if { (eval echo configure:2049: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+  echo '#line 2020 "configure"' > conftest.$ac_ext
+  if { (eval echo configure:2021: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
     case `/usr/bin/file conftest.$ac_objext` in
     *32-bit*)
       LD="${LD-ld} -32"
@@ -2066,7 +2038,7 @@ case $host in
   SAVE_CFLAGS="$CFLAGS"
   CFLAGS="$CFLAGS -belf"
   echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6
-echo "configure:2070: checking whether the C compiler needs -belf" >&5
+echo "configure:2042: checking whether the C compiler needs -belf" >&5
 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2079,14 +2051,14 @@ ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$a
 cross_compiling=$ac_cv_prog_cc_cross
 
      cat > conftest.$ac_ext <<EOF
-#line 2083 "configure"
+#line 2055 "configure"
 #include "confdefs.h"
 
 int main() {
 
 ; return 0; }
 EOF
-if { (eval echo configure:2090: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2062: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
   rm -rf conftest*
   lt_cv_cc_needs_belf=yes
 else
@@ -2210,7 +2182,7 @@ else
   # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2214: checking for $ac_word" >&5
+echo "configure:2186: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -2250,7 +2222,7 @@ fi
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:2254: checking for a BSD compatible install" >&5
+echo "configure:2226: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2303,7 +2275,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
 echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6
-echo "configure:2307: checking whether ${MAKE-make} sets \${MAKE}" >&5
+echo "configure:2279: checking whether ${MAKE-make} sets \${MAKE}" >&5
 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2332,7 +2304,7 @@ fi
 
 # Sanity check for the cross-compilation case:
 echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:2336: checking how to run the C preprocessor" >&5
+echo "configure:2308: checking how to run the C preprocessor" >&5
 # On Suns, sometimes $CPP names a directory.
 if test -n "$CPP" && test -d "$CPP"; then
   CPP=
@@ -2347,13 +2319,13 @@ else
   # On the NeXT, cc -E runs the code through the compiler's parser,
   # not just through cpp.
   cat > conftest.$ac_ext <<EOF
-#line 2351 "configure"
+#line 2323 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2357: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2329: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2364,13 +2336,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -E -traditional-cpp"
   cat > conftest.$ac_ext <<EOF
-#line 2368 "configure"
+#line 2340 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2374: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2346: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2381,13 +2353,13 @@ else
   rm -rf conftest*
   CPP="${CC-cc} -nologo -E"
   cat > conftest.$ac_ext <<EOF
-#line 2385 "configure"
+#line 2357 "configure"
 #include "confdefs.h"
 #include <assert.h>
 Syntax Error
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2391: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2363: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   :
@@ -2413,17 +2385,17 @@ echo "$ac_t""$CPP" 1>&6
 
 ac_safe=`echo "stdio.h" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for stdio.h""... $ac_c" 1>&6
-echo "configure:2417: checking for stdio.h" >&5
+echo "configure:2389: checking for stdio.h" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2422 "configure"
+#line 2394 "configure"
 #include "confdefs.h"
 #include <stdio.h>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2427: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2399: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2451,12 +2423,12 @@ fi
 
 
 echo $ac_n "checking for built-in g77 integer types""... $ac_c" 1>&6
-echo "configure:2455: checking for built-in g77 integer types" >&5
+echo "configure:2427: checking for built-in g77 integer types" >&5
 if eval "test \"`echo '$''{'libf2c_cv_has_g77_builtin_types'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2460 "configure"
+#line 2432 "configure"
 #include "confdefs.h"
 
 int main() {
@@ -2466,7 +2438,7 @@ __g77_longint g77l;
 __g77_ulongint g77ul;
 ; return 0; }
 EOF
-if { (eval echo configure:2470: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:2442: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   libf2c_cv_has_g77_builtin_types=yes
 else
@@ -2642,6 +2614,7 @@ s%@includedir@%$includedir%g
 s%@oldincludedir@%$oldincludedir%g
 s%@infodir@%$infodir%g
 s%@mandir@%$mandir%g
+s%@toplevel_srcdir@%$toplevel_srcdir%g
 s%@host@%$host%g
 s%@host_alias@%$host_alias%g
 s%@host_cpu@%$host_cpu%g
@@ -2657,7 +2630,6 @@ s%@build_alias@%$build_alias%g
 s%@build_cpu@%$build_cpu%g
 s%@build_vendor@%$build_vendor%g
 s%@build_os@%$build_os%g
-s%@toplevel_srcdir@%$toplevel_srcdir%g
 s%@glibcpp_builddir@%$glibcpp_builddir%g
 s%@glibcpp_srcdir@%$glibcpp_srcdir%g
 s%@LN_S@%$LN_S%g