NAME="IPFire" # Software name
SNAME="ipfire" # Short name
-VERSION="2.21" # Version number
-CORE="128" # Core Level (Filename)
-PAKFIRE_CORE="127" # Core Level (PAKFIRE)
+VERSION="2.23" # Version number
+CORE="130" # Core Level (Filename)
+PAKFIRE_CORE="129" # Core Level (PAKFIRE)
GIT_BRANCH=`git rev-parse --abbrev-ref HEAD` # Git Branch
SLOGAN="www.ipfire.org" # Software slogan
CONFIG_ROOT=/var/ipfire # Configuration rootdir
CXXFLAGS="${CFLAGS}"
# Determine parallelism
- if [ -z "${MAKETUNING}" ]; then
- # We assume that each process consumes about
- # 192MB of memory. Therefore we find out how
- # many processes fit into memory.
- local mem_max=$(( ${HOST_MEM} / 192 ))
-
- local processors="$(system_processors)"
- local cpu_max=$(( ${processors} + 1 ))
-
- local parallelism
- if [ ${mem_max} -lt ${cpu_max} ]; then
- parallelism=${mem_max}
- else
- parallelism=${cpu_max}
- fi
-
- # limit to -j23 because perl will not build
- # more
- if [ ${parallelism} -gt 23 ]; then
- parallelism=23
- fi
-
- MAKETUNING="-j${parallelism}"
+ # We assume that each process consumes about
+ # 128MB of memory. Therefore we find out how
+ # many processes fit into memory.
+ local mem_max=$(( ${SYSTEM_MEMORY} / 128 ))
+ local cpu_max=$(( ${SYSTEM_PROCESSORS} + 1 ))
+
+ local parallelism
+ if [ ${mem_max} -lt ${cpu_max} ]; then
+ parallelism=${mem_max}
+ else
+ parallelism=${cpu_max}
fi
+ # Use this as default PARALLELISM
+ DEFAULT_PARALLELISM="${parallelism}"
+
# Compression parameters
# We use mode 8 for reasonable memory usage when decompressing
# but with overall good compression
# We need to limit memory because XZ uses too much when running
# in parallel and it isn't very smart in limiting itself.
# We allow XZ to use up to 70% of all system memory.
- local xz_memory=$(( HOST_MEM * 7 / 10 ))
+ local xz_memory=$(( SYSTEM_MEMORY * 7 / 10 ))
# XZ memory cannot be larger than 2GB on 32 bit systems
case "${build_arch}" in
# Setup environment
set +h
LC_ALL=POSIX
- export LFS LC_ALL CFLAGS CXXFLAGS MAKETUNING
+ export LFS LC_ALL CFLAGS CXXFLAGS DEFAULT_PARALLELISM
unset CC CXX CPP LD_LIBRARY_PATH LD_PRELOAD
# Make some extra directories
CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
KVER="${KVER}" \
XZ_OPT="${XZ_OPT}" \
+ DEFAULT_PARALLELISM="${DEFAULT_PARALLELISM}" \
+ SYSTEM_PROCESSORS="${SYSTEM_PROCESSORS}" \
+ SYSTEM_MEMORY="${SYSTEM_MEMORY}" \
$(fake_environ) \
$(qemu_environ) \
"$@"
CCACHE_COMPILERCHECK="${CCACHE_COMPILERCHECK}" \
CFLAGS="${CFLAGS}" \
CXXFLAGS="${CXXFLAGS}" \
- MAKETUNING="${MAKETUNING}" \
+ DEFAULT_PARALLELISM="${DEFAULT_PARALLELISM}" \
+ SYSTEM_PROCESSORS="${SYSTEM_PROCESSORS}" \
+ SYSTEM_MEMORY="${SYSTEM_MEMORY}" \
make -f $* \
TOOLCHAIN=1 \
TOOLS_DIR="${TOOLS_DIR}" \
enterchroot \
${EXTRA_PATH}bash -x -c "cd /usr/src/lfs && \
- MAKETUNING=${MAKETUNING} \
make -f $* \
LFS_BASEDIR=/usr/src install" \
>> ${LOGFILE} 2>&1 &
unset TARGET_ARCH
fi
-# Get the amount of memory in this build system
-HOST_MEM=$(system_memory)
+# Get some information about the host system
+SYSTEM_PROCESSORS="$(system_processors)"
+SYSTEM_MEMORY="$(system_memory)"
if [ -n "${BUILD_ARCH}" ]; then
configure_build "${BUILD_ARCH}"
lfsmake2 backup
lfsmake2 openssl
[ "${BUILD_ARCH}" = "i586" ] && lfsmake2 openssl KCFG='-sse2'
- lfsmake2 openssl-compat
lfsmake2 popt
lfsmake2 libusb
lfsmake2 libusb-compat
lfsmake2 xr819-firmware
lfsmake2 zd1211-firmware
lfsmake2 rpi-firmware
+ lfsmake2 intel-microcode
lfsmake2 bc
lfsmake2 u-boot MKIMAGE=1
lfsmake2 cpio
lfsmake2 linux-initrd KCFG="-multi"
;;
esac
- lfsmake2 intel-microcode
lfsmake2 xtables-addons USPACE="1"
lfsmake2 libgpg-error
lfsmake2 libgcrypt
lfsmake2 attr
lfsmake2 acl
lfsmake2 libcap
+ lfsmake2 libcap-ng
lfsmake2 pciutils
lfsmake2 usbutils
lfsmake2 libxml2
lfsmake2 setserial
lfsmake2 setup
lfsmake2 libdnet
- lfsmake2 daq
- lfsmake2 snort
+ lfsmake2 yaml
+ lfsmake2 libhtp
+ lfsmake2 suricata
lfsmake2 oinkmaster
+ lfsmake2 ids-ruleset-sources
lfsmake2 squid
lfsmake2 squidguard
lfsmake2 calamaris
lfsmake2 python-progressbar
lfsmake2 python-xattr
lfsmake2 ddns
+ lfsmake2 python3-setuptools
+ lfsmake2 python3-setuptools-scm
lfsmake2 python3-six
lfsmake2 python3-dateutil
lfsmake2 python3-jmespath
lfsmake2 python3-rsa
lfsmake2 python3-pyasn1
lfsmake2 python3-botocore
+ lfsmake2 python3-llfuse
+ lfsmake2 python3-msgpack
lfsmake2 aws-cli
lfsmake2 transmission
lfsmake2 dpfhack
lfsmake2 nss-myhostname
lfsmake2 dehydrated
lfsmake2 shairport-sync
+ lfsmake2 borgbackup
+ lfsmake2 libedit
+ lfsmake2 knot
+ lfsmake2 spectre-meltdown-checker
+ lfsmake2 zabbix_agentd
}
buildinstaller() {