.\" Copyright (c) 1998 Andries Brouwer (aeb@cwi.nl), 24 September 1998
.\"
-.\" %%%LICENSE_START(verbatim)
+.\" %%%LICENSE_START(VERBATIM)
.\" Permission is granted to make and distribute verbatim copies of this
.\" manual provided the copyright notice and this permission notice are
.\" preserved on all copies.
.\" Formatted or processed versions of this manual, if unaccompanied by
.\" the source, must acknowledge the copyright and authors of this work.
.\" %%%LICENSE_END
+.\"
.\" Modified, 27 May 2004, Michael Kerrisk <mtk.manpages@gmail.com>
.\" Added notes on capability requirements
.\"
-.TH REBOOT 2 2010-10-31 "Linux" "Linux Programmer's Manual"
+.TH REBOOT 2 2017-09-15 "Linux" "Linux Programmer's Manual"
.SH NAME
reboot \- reboot or enable/disable Ctrl-Alt-Del
.SH SYNOPSIS
-/* For libc4 and libc5 the library call and the system call
- are identical, and since kernel version 2.1.30 there are
- symbolic names LINUX_REBOOT_* for the constants and a
- fourth argument to the call: */
-.sp
+/* Since kernel version 2.1.30 there are symbolic names LINUX_REBOOT_*
+ for the constants and a fourth argument to the call: */
+.PP
.B #include <unistd.h>
.br
.B #include <linux/reboot.h>
-.sp
+.PP
.BI "int reboot(int " magic ", int " magic2 ", int " cmd ", void *" arg );
-.sp
-/* Under glibc some of the constants involved have gotten
+
+/* Under glibc and most alternative libc's (including uclibc, dietlibc,
+ musl and a few others), some of the constants involved have gotten
symbolic names RB_*, and the library call is a 1-argument
- wrapper around the 3-argument system call: */
-.sp
+ wrapper around the system call: */
+.PP
.B #include <unistd.h>
.br
.B #include <sys/reboot.h>
-.sp
+.PP
.BI "int reboot(int " cmd );
.SH DESCRIPTION
The
it can be changed using
.BR loadkeys (1)).
.PP
-This system call will fail (with
+This system call fails (with the error
.BR EINVAL )
unless
.I magic
and since 2.5.71 also
.B LINUX_REBOOT_MAGIC2C
(that is, 537993216)
-are permitted as value for
+are permitted as values for
.IR magic2 .
(The hexadecimal values of these constants are meaningful.)
+.PP
The
.I cmd
argument can have the following values:
.TP
.B LINUX_REBOOT_CMD_CAD_OFF
-(RB_DISABLE_CAD, 0).
+.RB ( RB_DISABLE_CAD ,
+0).
CAD is disabled.
This means that the CAD keystroke will cause a
.B SIGINT
proper action (maybe: kill all processes, sync, reboot).
.TP
.B LINUX_REBOOT_CMD_CAD_ON
-(RB_ENABLE_CAD, 0x89abcdef).
+.RB ( RB_ENABLE_CAD ,
+0x89abcdef).
CAD is enabled.
This means that the CAD keystroke will immediately cause
the action associated with
.BR LINUX_REBOOT_CMD_RESTART .
.TP
.B LINUX_REBOOT_CMD_HALT
-(RB_HALT_SYSTEM, 0xcdef0123; since 1.1.76).
+.RB ( RB_HALT_SYSTEM ,
+0xcdef0123; since Linux 1.1.76).
The message "System halted." is printed, and the system is halted.
Control is given to the ROM monitor, if there is one.
If not preceded by a
.BR sync (2),
data will be lost.
.TP
-.BR LINUX_REBOOT_CMD_KEXEC " (since Linux 2.6.13)"
+.BR LINUX_REBOOT_CMD_KEXEC
+.RB ( RB_KEXEC ,
+0x45584543, since Linux 2.6.13).
Execute a kernel that has been loaded earlier with
.BR kexec_load (2).
-This option is only available if the kernel was configured with
+This option is available only if the kernel was configured with
.BR CONFIG_KEXEC .
.TP
.B LINUX_REBOOT_CMD_POWER_OFF
-(0x4321fedc; since 2.1.30).
+.RB ( RB_POWER_OFF ,
+0x4321fedc; since Linux 2.1.30).
The message "Power down." is printed, the system is stopped,
and all power is removed from the system, if possible.
If not preceded by a
data will be lost.
.TP
.B LINUX_REBOOT_CMD_RESTART
-(RB_AUTOBOOT, 0x1234567).
+.RB ( RB_AUTOBOOT ,
+0x1234567).
The message "Restarting system." is printed, and a default
restart is performed immediately.
If not preceded by a
data will be lost.
.TP
.B LINUX_REBOOT_CMD_RESTART2
-(0xa1b2c3d4; since 2.1.30).
+(0xa1b2c3d4; since Linux 2.1.30).
The message "Restarting system with command \(aq%s\(aq" is printed,
and a restart (using the command string given in
.IR arg )
If not preceded by a
.BR sync (2),
data will be lost.
-.LP
+.TP
+.BR LINUX_REBOOT_CMD_SW_SUSPEND
+.RB ( RB_SW_SUSPEND ,
+0xd000fce1; since Linux 2.5.18).
+The system is suspended (hibernated) to disk.
+This option is available only if the kernel was configured with
+.BR CONFIG_HIBERNATION .
+.PP
Only the superuser may call
.BR reboot ().
-.LP
+.PP
The precise effect of the above actions depends on the architecture.
For the i386 architecture, the additional argument does not do
anything at present (2.1.122), but the type of reboot can be
determined by kernel command-line arguments ("reboot=...") to be
either warm or cold, and either hard or through the BIOS.
+.\"
+.SS Behavior inside PID namespaces
+.\" commit cf3f89214ef6a33fad60856bc5ffd7bb2fc4709b
+.\" see also commit 923c7538236564c46ee80c253a416705321f13e3
+Since Linux 3.4,
+if
+.BR reboot ()
+is called
+from a PID namespace other than the initial PID namespace
+with one of the
+.I cmd
+values listed below,
+it performs a "reboot" of that namespace:
+the "init" process of the PID namespace is immediately terminated,
+with the effects described in
+.BR pid_namespaces (7).
+.PP
+The values that can be supplied in
+.I cmd
+when calling
+.BR reboot ()
+in this case are as follows:
+.TP
+.BR LINUX_REBOOT_CMD_RESTART ", " LINUX_REBOOT_CMD_RESTART2
+The "init" process is terminated,
+and
+.BR wait (2)
+in the parent process reports that the child was killed with a
+.B SIGHUP
+signal.
+.TP
+.BR LINUX_REBOOT_CMD_POWER_OFF ", " LINUX_REBOOT_CMD_HALT
+The "init" process is terminated,
+and
+.BR wait (2)
+in the parent process reports that the child was killed with a
+.B SIGINT
+signal.
+.PP
+For the other
+.I cmd
+values,
+.BR reboot ()
+returns \-1 and
+.I errno
+is set to
+.BR EINVAL .
.SH RETURN VALUE
For the values of
.I cmd
.B EPERM
The calling process has insufficient privilege to call
.BR reboot ();
-the
+the caller must have the
.B CAP_SYS_BOOT
-capability is required.
+inside its user namespace.
.SH CONFORMING TO
.BR reboot ()
is Linux-specific,
and should not be used in programs intended to be portable.
.SH SEE ALSO
+.BR systemctl (1),
+.BR systemd (1),
+.BR kexec_load (2),
.BR sync (2),
.BR bootparam (7),
.BR capabilities (7),
.BR ctrlaltdel (8),
.BR halt (8),
-.BR reboot (8)
+.BR shutdown (8)
projects / thirdparty / man-pages.git / blobdiff