.\" Copyright (c) 2006, 2008 by Michael Kerrisk <mtk.manpages@gmail.com>
.\"
+.\" %%%LICENSE_START(VERBATIM)
.\" Permission is granted to make and distribute verbatim copies of this
.\" manual provided the copyright notice and this permission notice are
.\" preserved on all copies.
.\"
.\" Formatted or processed versions of this manual, if unaccompanied by
.\" the source, must acknowledge the copyright and authors of this work.
+.\" %%%LICENSE_END
.\"
-.TH CORE 5 2013-02-25 "Linux" "Linux Programmer's Manual"
+.TH CORE 5 2019-03-06 "Linux" "Linux Programmer's Manual"
.SH NAME
core \- core dump file
.SH DESCRIPTION
to inspect the state of the program at the time that it terminated.
A list of the signals which cause a process to dump core can be found in
.BR signal (7).
-
+.PP
A process can set its soft
.B RLIMIT_CORE
resource limit to place an upper limit on the size of the core dump file
that will be produced if it receives a "core dump" signal; see
.BR getrlimit (2)
for details.
-
+.PP
There are various circumstances in which a core dump file is
not produced:
.IP * 3
The process does not have permission to write the core file.
-(By default the core file is called
-.IR core ,
+(By default, the core file is called
+.IR core
+or
+.IR core.pid ,
+where
+.I pid
+is the ID of the process that dumped core,
and is created in the current working directory.
See below for details on naming.)
-Writing the core file will fail if the directory in which
+Writing the core file fails if the directory in which
it is to be created is nonwritable,
or if a file with the same name exists and
is not writable
core dump already exists, but there is more than one hard link to that
file.
.IP *
-The file system where the core dump file would be created is full;
+The filesystem where the core dump file would be created is full;
or has run out of inodes; or is mounted read-only;
-or the user has reached their quota for the file system.
+or the user has reached their quota for the filesystem.
.IP *
The directory in which the core dump file is to be created does
not exist.
.IP *
The process is executing a set-user-ID (set-group-ID) program
that is owned by a user (group) other than the real user (group)
-ID of the process.
+ID of the process,
+or the process is executing a program that has file capabilities (see
+.BR capabilities (7)).
(However, see the description of the
.BR prctl (2)
.B PR_SET_DUMPABLE
file in
.BR proc (5).)
.IP *
+.I /proc/sys/kernel/core_pattern
+is empty and
+.I /proc/sys/kernel/core_uses_pid
+contains the value 0.
+(These files are described below.)
+Note that if
+.I /proc/sys/kernel/core_pattern
+is empty and
+.I /proc/sys/kernel/core_uses_pid
+contains the value 1,
+core dump files will have names of the form
+.IR .pid ,
+and such files are hidden unless one uses the
+.BR ls (1)
+.I \-a
+option.
+.IP *
(Since Linux 3.7)
.\" commit 046d662f481830e652ac34cd112249adde16452a
The kernel was configured without the
.BR madvise (2)
.B MADV_DONTDUMP
flag was employed.
+.PP
+On systems that employ
+.BR systemd (1)
+as the
+.I init
+framework, core dumps may instead be placed in a location determined by
+.BR systemd (1).
+See below for further details.
+.\"
.SS Naming of core dump files
By default, a core dump file is named
.IR core ,
%%
a single % character
.TP
-%p
-PID of dumped process
+%c
+core file size soft resource limit of crashing process (since Linux 2.6.24)
.TP
-%u
-(numeric) real UID of dumped process
+%d
+.\" Added in git commit 12a2b4b2241e318b4f6df31228e4272d2c2968a1
+dump mode\(emsame as value returned by
+.BR prctl (2)
+.B PR_GET_DUMPABLE
+(since Linux 3.7)
+.TP
+%e
+executable filename (without path prefix)
+.TP
+%E
+pathname of executable,
+with slashes (\(aq/\(aq) replaced by exclamation marks (\(aq!\(aq)
+(since Linux 3.0).
.TP
%g
(numeric) real GID of dumped process
.TP
+%h
+hostname (same as \fInodename\fP returned by \fBuname\fP(2))
+.TP
+%i
+TID of thread that triggered core dump,
+as seen in the PID namespace in which the thread resides
+.\" commit b03023ecbdb76c1dec86b41ed80b123c22783220
+(since Linux 3.18)
+.TP
+%I
+TID of thread that triggered core dump, as seen in the initial PID namespace
+.\" commit b03023ecbdb76c1dec86b41ed80b123c22783220
+(since Linux 3.18)
+.TP
+%p
+PID of dumped process,
+as seen in the PID namespace in which the process resides
+.TP
+%P
+.\" Added in git commit 65aafb1e7484b7434a0c1d4c593191ebe5776a2f
+PID of dumped process, as seen in the initial PID namespace
+(since Linux 3.12)
+.TP
%s
number of signal causing dump
.TP
time of dump, expressed as seconds since the
Epoch, 1970-01-01 00:00:00 +0000 (UTC)
.TP
-%h
-hostname (same as \fInodename\fP returned by \fBuname\fP(2))
-.TP
-%e
-executable filename (without path prefix)
-.TP
-%E
-pathname of executable,
-with slashes (\(aq/\(aq) replaced by exclamation marks (\(aq!\(aq).
-.TP
-%c
-core file size soft resource limit of crashing process (since Linux 2.6.24)
+%u
+(numeric) real UID of dumped process
.PD
.RE
.PP
The default value in this file is "core".
For backward compatibility, if
.I /proc/sys/kernel/core_pattern
-does not include "%p" and
+does not include
+.I %p
+and
.I /proc/sys/kernel/core_uses_pid
(see below)
is nonzero, then .PID will be appended to the core filename.
-
+.PP
+Paths are interpreted according to the settings that are active for the
+crashing process.
+That means the crashing process's mount namespace (see
+.BR mount_namespaces (7)),
+its current working directory (found via
+.BR getcwd (2)),
+and its root directory (see
+.BR chroot (2)).
+.PP
Since version 2.4, Linux has also provided
a more primitive method of controlling
the name of the core dump file.
If this file contains a nonzero value, then the core dump file includes
the process ID in a name of the form
.IR core.PID .
-
+.PP
Since Linux 3.6,
.\" 9520628e8ceb69fa9a4aee6b57f22675d9e1b709
if
.I /proc/sys/kernel/core_pattern
file.
If the first character of this file is a pipe symbol (\fB|\fP),
-then the remainder of the line is interpreted as a program to be
-executed.
+then the remainder of the line is interpreted as the command-line for
+a user-space program (or script) that is to be executed.
Instead of being written to a disk file, the core dump is given as
standard input to the program.
Note the following points:
pathname relative to the root directory, \fI/\fP),
and must immediately follow the '|' character.
.IP *
+The command-line arguments can include any of
+the % specifiers listed above.
+For example, to pass the PID of the process that is being dumped, specify
+.I %p
+in an argument.
+.IP *
The process created to run the program runs as user and group
.IR root .
.IP *
+Running as
+.I root
+does not confer any exceptional security bypasses.
+Namely, LSMs (e.g., SELinux) are still active and may prevent the handler
+from accessing details about the crashed process via
+.IR /proc/[pid] .
+.IP *
+The program pathname is interpreted with respect to the initial mount namespace
+as it is always executed there.
+It is not affected by the settings
+(e.g., root directory, mount namespace, current working directory)
+of the crashing process.
+.IP *
+The process runs in the initial namespaces
+(PID, mount, user, and so on)
+and not in the namespaces of the crashing process.
+One can utilize specifiers such as
+.I %P
+to find the right
+.I /proc/[pid]
+directory and probe/enter the crashing process's namespaces if needed.
+.IP *
+The process starts with its current working directory
+as the root directory.
+If desired, it is possible change to the working directory of
+the dumping process by employing the value provided by the
+.I %P
+specifier to change to the location of the dumping process via
+.IR /proc/[pid]/cwd .
+.IP *
Command-line arguments can be supplied to the
-program (since kernel 2.6.24),
+program (since Linux 2.6.24),
delimited by white space (up to a total line length of 128 bytes).
.IP *
-The command-line arguments can include any of
-the % specifiers listed above.
-For example, to pass the PID of the process that is being dumped, specify
-.I %p
-in an argument.
+The
+.B RLIMIT_CORE
+limit is not enforced for core dumps that are piped to a program
+via this mechanism.
+.\"
+.SS /proc/sys/kernel/core_pipe_limit
+When collecting core dumps via a pipe to a user-space program,
+it can be useful for the collecting program to gather data about
+the crashing process from that process's
+.IR /proc/[pid]
+directory.
+In order to do this safely,
+the kernel must wait for the program collecting the core dump to exit,
+so as not to remove the crashing process's
+.IR /proc/[pid]
+files prematurely.
+This in turn creates the
+possibility that a misbehaving collecting program can block
+the reaping of a crashed process by simply never exiting.
+.PP
+Since Linux 2.6.32,
+.\" commit a293980c2e261bd5b0d2a77340dd04f684caff58
+the
+.I /proc/sys/kernel/core_pipe_limit
+can be used to defend against this possibility.
+The value in this file defines how many concurrent crashing
+processes may be piped to user-space programs in parallel.
+If this value is exceeded, then those crashing processes above this value
+are noted in the kernel log and their core dumps are skipped.
+.PP
+A value of 0 in this file is special.
+It indicates that unlimited processes may be captured in parallel,
+but that no waiting will take place (i.e., the collecting
+program is not guaranteed access to
+.IR /proc/<crashing-PID> ).
+The default value for this file is 0.
+.\"
.SS Controlling which mappings are written to the core dump
Since kernel 2.6.23, the Linux-specific
-.IR /proc/PID/coredump_filter
+.IR /proc/[pid]/coredump_filter
file can be used to control which memory segments are written to the
core dump file in the event that a core dump is performed for the
process with the corresponding process ID.
-
+.PP
The value in the file is a bit mask of memory mapping types (see
.BR mmap (2)).
If a bit is set in the mask, then memory mappings of the
.TP
bit 6 (since Linux 2.6.28)
Dump shared huge pages.
+.TP
+bit 7 (since Linux 4.4)
+.\" commit ab27a8d04b32b6ee8c30c14c4afd1058e8addc82
+Dump private DAX pages.
+.TP
+bit 8 (since Linux 4.4)
+.\" commit ab27a8d04b32b6ee8c30c14c4afd1058e8addc82
+Dump shared DAX pages.
.RE
.PD
.PP
By default, the following bits are set: 0, 1, 4 (if the
.B CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS
kernel configuration option is enabled), and 5.
+This default can be modified at boot time using the
+.I coredump_filter
+boot option.
+.PP
The value of this file is displayed in hexadecimal.
(The default value is thus displayed as 33.)
-
+.PP
Memory-mapped I/O pages such as frame buffer are never dumped, and
-virtual DSO pages are always dumped, regardless of the
+virtual DSO
+.RB ( vdso (7))
+pages are always dumped, regardless of the
.I coredump_filter
value.
-
+.PP
A child process created via
.BR fork (2)
inherits its parent's
.I coredump_filter
value is preserved across an
.BR execve (2).
-
+.PP
It can be useful to set
.I coredump_filter
in the parent shell before running a program, for example:
-
+.PP
.in +4n
-.nf
+.EX
.RB "$" " echo 0x7 > /proc/self/coredump_filter"
.RB "$" " ./some_program"
-.fi
+.EE
.in
.PP
-This file is only provided if the kernel was built with the
+This file is provided only if the kernel was built with the
.B CONFIG_ELF_CORE
configuration option.
+.\"
+.SS Core dumps and systemd
+On systems using the
+.BR systemd (1)
+.I init
+framework, core dumps may be placed in a location determined by
+.BR systemd (1).
+To do this,
+.BR systemd (1)
+employs the
+.I core_pattern
+feature that allows piping core dumps to a program.
+One can verify this by checking whether core dumps are being piped to the
+.BR systemd\-coredump (8)
+program:
+.PP
+.in +4n
+.EX
+$ \fBcat /proc/sys/kernel/core_pattern\fP
+|/usr/lib/systemd/systemd\-coredump %P %u %g %s %t %c %e
+.EE
+.in
+.PP
+In this case, core dumps will be placed in the location configured for
+.BR systemd\-coredump (8),
+typically as
+.BR lz4 (1)
+compressed files in the directory
+.IR /var/lib/systemd/coredump/ .
+One can list the core dumps that have been recorded by
+.BR systemd\-coredump (8)
+using
+.BR coredumpctl (1):
+.PP
+.in +2n
+.EX
+$ \fBcoredumpctl list | tail -5\fP
+Wed 2017-10-11 22:25:30 CEST 2748 1000 1000 3 present /usr/bin/sleep
+Thu 2017-10-12 06:29:10 CEST 2716 1000 1000 3 present /usr/bin/sleep
+Thu 2017-10-12 06:30:50 CEST 2767 1000 1000 3 present /usr/bin/sleep
+Thu 2017-10-12 06:37:40 CEST 2918 1000 1000 3 present /usr/bin/cat
+Thu 2017-10-12 08:13:07 CEST 2955 1000 1000 3 present /usr/bin/cat
+.EE
+.in
+.PP
+The information shown for each core dump includes the date and time
+of the dump, the PID, UID, and GID of the dumping process,
+the signal number that caused the core dump,
+and the pathname of the executable that was being run by the dumped process.
+Various options to
+.BR coredumpctl (1)
+allow a specified coredump file to be pulled from the
+.BR systemd (1)
+location into a specified file.
+For example, to extract the core dump for PID 2955 shown above to a file named
+.IR core
+in the current directory, one could use:
+.PP
+.in +4n
+.EX
+$ \fBcoredumpctl dump 2955 \-o core\fP
+.EE
+.in
+.PP
+For more extensive details, see the
+.BR coredumpctl (1)
+manual page.
+.PP
+To disable the
+.BR systemd (1)
+mechanism that archives core dumps, restoring to something more like
+traditional Linux behavior, one can set an override for the
+.BR systemd (1)
+mechanism, using something like:
+.PP
+.in +2n
+.EX
+# echo "kernel.core_pattern=core.%p" > /etc/sysctl.d/50\-coredump.conf
+# /lib/systemd/systemd\-sysctl
+.EE
+.in
+.PP
+.\"
.SH NOTES
The
.BR gdb (1)
.I gcore
command can be used to obtain a core dump of a running process.
-
-If a multithreaded process (or, more precisely, a process that
+.PP
+In Linux versions up to and including 2.6.27,
+.\" Changed with commit 6409324b385f3f63a03645b4422e3be67348d922
+if a multithreaded process (or, more precisely, a process that
shares its memory with another process by being created with the
.B CLONE_VM
flag of
.BR clone (2))
dumps core, then the process ID is always appended to the core filename,
unless the process ID was already included elsewhere in the
-filename via a %p specification in
+filename via a
+.I %p
+specification in
.IR /proc/sys/kernel/core_pattern .
-(This is primarily useful when employing the LinuxThreads implementation,
+(This is primarily useful when employing the obsolete
+LinuxThreads implementation,
where each thread of a process has a different PID.)
.\" Always including the PID in the name of the core file made
.\" sense for LinuxThreads, where each thread had a unique PID,
.IR core_pattern_pipe_test ):
.PP
.in +4n
-.nf
+.EX
.RB "$" " cc \-o core_pattern_pipe_test core_pattern_pipe_test.c"
.RB "$" " su"
Password:
argc[3]=<GID=100>
argc[4]=<sig=3>
Total bytes in core dump: 282624
-.fi
+.EE
.in
.SS Program source
\&
-.nf
+.EX
/* core_pattern_pipe_test.c */
#define _GNU_SOURCE
/* Display command\-line arguments given to core_pattern
pipe program */
- fprintf(fp, "argc=%d\\n", argc);
+ fprintf(fp, "argc=%d\en", argc);
for (j = 0; j < argc; j++)
- fprintf(fp, "argc[%d]=<%s>\\n", j, argv[j]);
+ fprintf(fp, "argc[%d]=<%s>\en", j, argv[j]);
/* Count bytes in standard input (the core dump) */
tot = 0;
while ((nread = read(STDIN_FILENO, buf, BUF_SIZE)) > 0)
tot += nread;
- fprintf(fp, "Total bytes in core dump: %d\\n", tot);
+ fprintf(fp, "Total bytes in core dump: %d\en", tot);
+ fclose(fp);
exit(EXIT_SUCCESS);
}
-.fi
+.EE
.SH SEE ALSO
.BR bash (1),
+.BR coredumpctl (1),
.BR gdb (1),
.BR getrlimit (2),
.BR mmap (2),
.BR elf (5),
.BR proc (5),
.BR pthreads (7),
-.BR signal (7)
+.BR signal (7),
+.BR systemd\-coredump (8)