-@node Processes, Job Control, Program Basics, Top
+@node Processes, Inter-Process Communication, Program Basics, Top
@c %MENU% How to create processes and run other programs
@chapter Processes
it doesn't give you much control over the details: you have to wait
until the subprogram terminates before you can do anything else.
-@comment stdlib.h
-@comment ISO
@deftypefun int system (const char *@var{command})
+@standards{ISO, stdlib.h}
@pindex sh
+@safety{@prelim{}@mtsafe{}@asunsafe{@ascuplugin{} @ascuheap{} @asulock{}}@acunsafe{@aculock{} @acsmem{}}}
+@c system @ascuplugin @ascuheap @asulock @aculock @acsmem
+@c do_system @ascuplugin @ascuheap @asulock @aculock @acsmem
+@c sigemptyset dup ok
+@c libc_lock_lock @asulock @aculock
+@c ADD_REF ok
+@c sigaction dup ok
+@c SUB_REF ok
+@c libc_lock_unlock @aculock
+@c sigaddset dup ok
+@c sigprocmask dup ok
+@c CLEANUP_HANDLER @ascuplugin @ascuheap @acsmem
+@c libc_cleanup_region_start @ascuplugin @ascuheap @acsmem
+@c pthread_cleanup_push_defer @ascuplugin @ascuheap @acsmem
+@c CANCELLATION_P @ascuplugin @ascuheap @acsmem
+@c CANCEL_ENABLED_AND_CANCELED ok
+@c do_cancel @ascuplugin @ascuheap @acsmem
+@c cancel_handler ok
+@c kill syscall ok
+@c waitpid dup ok
+@c libc_lock_lock ok
+@c sigaction dup ok
+@c libc_lock_unlock ok
+@c FORK ok
+@c clone syscall ok
+@c waitpid dup ok
+@c CLEANUP_RESET ok
+@c libc_cleanup_region_end ok
+@c pthread_cleanup_pop_restore ok
+@c SINGLE_THREAD_P ok
+@c LIBC_CANCEL_ASYNC @ascuplugin @ascuheap @acsmem
+@c libc_enable_asynccancel @ascuplugin @ascuheap @acsmem
+@c CANCEL_ENABLED_AND_CANCELED_AND_ASYNCHRONOUS dup ok
+@c do_cancel dup @ascuplugin @ascuheap @acsmem
+@c LIBC_CANCEL_RESET ok
+@c libc_disable_asynccancel ok
+@c lll_futex_wait dup ok
This function executes @var{command} as a shell command. In @theglibc{},
it always uses the default shell @code{sh} to run the command.
In particular, it searches the directories in @code{PATH} to find
This section gives an overview of processes and of the steps involved in
creating a process and making it run another program.
-@cindex process ID
-@cindex process lifetime
-Each process is named by a @dfn{process ID} number. A unique process ID
-is allocated to each process when it is created. The @dfn{lifetime} of
-a process ends when its termination is reported to its parent process;
-at that time, all of the process resources, including its process ID,
-are freed.
-
@cindex creating a process
@cindex forking a process
@cindex child process
@cindex parent process
-Processes are created with the @code{fork} system call (so the operation
-of creating a new process is sometimes called @dfn{forking} a process).
-The @dfn{child process} created by @code{fork} is a copy of the original
-@dfn{parent process}, except that it has its own process ID.
+@cindex subprocess
+A new processes is created when one of the functions
+@code{posix_spawn}, @code{fork}, or @code{vfork} is called. (The
+@code{system} and @code{popen} also create new processes internally.)
+Due to the name of the @code{fork} function, the act of creating a new
+process is sometimes called @dfn{forking} a process. Each new process
+(the @dfn{child process} or @dfn{subprocess}) is allocated a process
+ID, distinct from the process ID of the parent process. @xref{Process
+Identification}.
After forking a child process, both the parent and child processes
continue to execute normally. If you want your program to wait for a
@node Process Identification
@section Process Identification
-The @code{pid_t} data type represents process IDs. You can get the
-process ID of a process by calling @code{getpid}. The function
-@code{getppid} returns the process ID of the parent of the current
-process (this is also known as the @dfn{parent process ID}). Your
-program should include the header files @file{unistd.h} and
+@cindex process ID
+Each process is named by a @dfn{process ID} number, a value of type
+@code{pid_t}. A process ID is allocated to each process when it is
+created. Process IDs are reused over time. The lifetime of a process
+ends when the parent process of the corresponding process waits on the
+process ID after the process has terminated. @xref{Process
+Completion}. (The parent process can arrange for such waiting to
+happen implicitly.) A process ID uniquely identifies a process only
+during the lifetime of the process. As a rule of thumb, this means
+that the process must still be running.
+
+Process IDs can also denote process groups and sessions.
+@xref{Job Control}.
+
+@cindex thread ID
+@cindex task ID
+@cindex thread group
+On Linux, threads created by @code{pthread_create} also receive a
+@dfn{thread ID}. The thread ID of the initial (main) thread is the
+same as the process ID of the entire process. Thread IDs for
+subsequently created threads are distinct. They are allocated from
+the same numbering space as process IDs. Process IDs and thread IDs
+are sometimes also referred to collectively as @dfn{task IDs}. In
+contrast to processes, threads are never waited for explicitly, so a
+thread ID becomes eligible for reuse as soon as a thread exits or is
+canceled. This is true even for joinable threads, not just detached
+threads. Threads are assigned to a @dfn{thread group}. In
+@theglibc{} implementation running on Linux, the process ID is the
+thread group ID of all threads in the process.
+
+You can get the process ID of a process by calling @code{getpid}. The
+function @code{getppid} returns the process ID of the parent of the
+current process (this is also known as the @dfn{parent process ID}).
+Your program should include the header files @file{unistd.h} and
@file{sys/types.h} to use these functions.
@pindex sys/types.h
@pindex unistd.h
-@comment sys/types.h
-@comment POSIX.1
@deftp {Data Type} pid_t
+@standards{POSIX.1, sys/types.h}
The @code{pid_t} data type is a signed integer type which is capable
of representing a process ID. In @theglibc{}, this is an @code{int}.
@end deftp
-@comment unistd.h
-@comment POSIX.1
@deftypefun pid_t getpid (void)
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
The @code{getpid} function returns the process ID of the current process.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun pid_t getppid (void)
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
The @code{getppid} function returns the process ID of the parent of the
current process.
@end deftypefun
+@deftypefun pid_t gettid (void)
+@standards{Linux, unistd.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
+The @code{gettid} function returns the thread ID of the current
+thread. The returned value is obtained from the Linux kernel and is
+not subject to caching. See the discussion of thread IDs above,
+especially regarding reuse of the IDs of threads which have exited.
+
+This function is specific to Linux.
+@end deftypefun
+
@node Creating a Process
@section Creating a Process
It is declared in the header file @file{unistd.h}.
@pindex unistd.h
-@comment unistd.h
-@comment POSIX.1
@deftypefun pid_t fork (void)
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@asunsafe{@ascuplugin{}}@acunsafe{@aculock{}}}
+@c The nptl/.../linux implementation safely collects fork_handlers into
+@c an alloca()ed linked list and increments ref counters; it uses atomic
+@c ops and retries, avoiding locking altogether. It then takes the
+@c IO_list lock, resets the thread-local pid, and runs fork. The parent
+@c restores the thread-local pid, releases the lock, and runs parent
+@c handlers, decrementing the ref count and signaling futex wait if
+@c requested by unregister_atfork. The child bumps the fork generation,
+@c sets the thread-local pid, resets cpu clocks, initializes the robust
+@c mutex list, the stream locks, the IO_list lock, the dynamic loader
+@c lock, runs the child handlers, reseting ref counters to 1, and
+@c initializes the fork lock. These are all safe, unless atfork
+@c handlers themselves are unsafe.
The @code{fork} function creates a new process.
If the operation is successful, there are then both parent and child
@end itemize
-@comment unistd.h
-@comment BSD
@deftypefun pid_t vfork (void)
+@standards{BSD, unistd.h}
+@safety{@prelim{}@mtsafe{}@asunsafe{@ascuplugin{}}@acunsafe{@aculock{}}}
+@c The vfork implementation proper is a safe syscall, but it may fall
+@c back to fork if the vfork syscall is not available.
The @code{vfork} function is similar to @code{fork} but on some systems
it is more efficient; however, there are restrictions you must follow to
use it safely.
but otherwise they all do the same thing. They are declared in the
header file @file{unistd.h}.
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execv (const char *@var{filename}, char *const @var{argv}@t{[]})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
The @code{execv} function executes the file named by @var{filename} as a
new process image.
@ref{Environment Variables}, for information about environments.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execl (const char *@var{filename}, const char *@var{arg0}, @dots{})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@asunsafe{@ascuheap{}}@acunsafe{@acsmem{}}}
This is similar to @code{execv}, but the @var{argv} strings are
specified individually instead of as an array. A null pointer must be
passed as the last such argument.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execve (const char *@var{filename}, char *const @var{argv}@t{[]}, char *const @var{env}@t{[]})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This is similar to @code{execv}, but permits you to specify the environment
for the new program explicitly as the @var{env} argument. This should
be an array of strings in the same format as for the @code{environ}
variable; see @ref{Environment Access}.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execle (const char *@var{filename}, const char *@var{arg0}, @dots{}, char *const @var{env}@t{[]})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{}@asunsafe{@ascuheap{}}@acunsafe{@acsmem{}}}
This is similar to @code{execl}, but permits you to specify the
environment for the new program explicitly. The environment argument is
passed following the null pointer that marks the last @var{argv}
the @code{environ} variable.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execvp (const char *@var{filename}, char *const @var{argv}@t{[]})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{@mtsenv{}}@asunsafe{@ascuheap{}}@acunsafe{@acsmem{}}}
The @code{execvp} function is similar to @code{execv}, except that it
searches the directories listed in the @code{PATH} environment variable
(@pxref{Standard Environment}) to find the full file name of a
to run the commands that users type.
@end deftypefun
-@comment unistd.h
-@comment POSIX.1
@deftypefun int execlp (const char *@var{filename}, const char *@var{arg0}, @dots{})
+@standards{POSIX.1, unistd.h}
+@safety{@prelim{}@mtsafe{@mtsenv{}}@asunsafe{@ascuheap{}}@acunsafe{@acsmem{}}}
This function is like @code{execl}, except that it performs the same
file name searching as the @code{execvp} function.
@end deftypefun
The size of the argument list and environment list taken together must
-not be greater than @code{ARG_MAX} bytes. @xref{General Limits}. In
-the GNU system, the size (which compares against @code{ARG_MAX})
+not be greater than @code{ARG_MAX} bytes. @xref{General Limits}. On
+@gnuhurdsystems{}, the size (which compares against @code{ARG_MAX})
includes, for each string, the number of characters in the string, plus
the size of a @code{char *}, plus one, rounded up to a multiple of the
size of a @code{char *}. Other systems may have somewhat different
@table @code
@item E2BIG
The combined size of the new program's argument list and environment
-list is larger than @code{ARG_MAX} bytes. The GNU system has no
+list is larger than @code{ARG_MAX} bytes. @gnuhurdsystems{} have no
specific limit on the argument list size, so this error code cannot
result, but you may get @code{ENOMEM} instead if the arguments are too
big for available memory.
@item
Current working directory and root directory. @xref{Working
-Directory}. In the GNU system, the root directory is not copied when
+Directory}. On @gnuhurdsystems{}, the root directory is not copied when
executing a setuid program; instead the system default root directory
is used for the new program.
File descriptors open in the existing process image remain open in the
new process image, unless they have the @code{FD_CLOEXEC}
(close-on-exec) flag set. The files that remain open inherit all
-attributes of the open file description from the existing process image,
+attributes of the open file descriptors from the existing process image,
including file locks. File descriptors are discussed in @ref{Low-Level I/O}.
Streams, by contrast, cannot survive through @code{exec} functions,
are declared in the header file @file{sys/wait.h}.
@pindex sys/wait.h
-@comment sys/wait.h
-@comment POSIX.1
@deftypefun pid_t waitpid (pid_t @var{pid}, int *@var{status-ptr}, int @var{options})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
The @code{waitpid} function is used to request status information from a
child process whose process ID is @var{pid}. Normally, the calling
process is suspended until the child process makes status information
to the @code{waitpid} function.
@comment Extra blank lines make it look better.
-@table @code
+@vtable @code
@item WAIT_ANY
This constant macro (whose value is @code{-1}) specifies that
This constant (with value @code{0}) specifies that @code{waitpid} should
return status information about any child process in the same process
group as the calling process.
-@end table
+@end vtable
These symbolic constants are defined as flags for the @var{options}
argument to the @code{waitpid} function. You can bitwise-OR the flags
together to obtain a value to use as the argument.
-@table @code
+@vtable @code
@item WNOHANG
This flag specifies that @code{waitpid} should return immediately
This flag specifies that @code{waitpid} should report the status of any
child processes that have been stopped as well as those that have
terminated.
-@end table
+@end vtable
-@comment sys/wait.h
-@comment POSIX.1
@deftypefun pid_t wait (int *@var{status-ptr})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This is a simplified version of @code{waitpid}, and is used to wait
until any one child process terminates. The call:
@c ref pthread_cleanup_push / pthread_cleanup_pop
@end deftypefun
-@comment sys/wait.h
-@comment BSD
@deftypefun pid_t wait4 (pid_t @var{pid}, int *@var{status-ptr}, int @var{options}, struct rusage *@var{usage})
+@standards{BSD, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
If @var{usage} is a null pointer, @code{wait4} is equivalent to
@code{waitpid (@var{pid}, @var{status-ptr}, @var{options})}.
These macros are defined in the header file @file{sys/wait.h}.
@pindex sys/wait.h
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WIFEXITED (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This macro returns a nonzero value if the child process terminated
normally with @code{exit} or @code{_exit}.
@end deftypefn
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WEXITSTATUS (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
If @code{WIFEXITED} is true of @var{status}, this macro returns the
low-order 8 bits of the exit status value from the child process.
@xref{Exit Status}.
@end deftypefn
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WIFSIGNALED (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This macro returns a nonzero value if the child process terminated
because it received a signal that was not handled.
@xref{Signal Handling}.
@end deftypefn
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WTERMSIG (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
If @code{WIFSIGNALED} is true of @var{status}, this macro returns the
signal number of the signal that terminated the child process.
@end deftypefn
-@comment sys/wait.h
-@comment BSD
@deftypefn Macro int WCOREDUMP (int @var{status})
+@standards{BSD, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This macro returns a nonzero value if the child process terminated
and produced a core dump.
@end deftypefn
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WIFSTOPPED (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
This macro returns a nonzero value if the child process is stopped.
@end deftypefn
-@comment sys/wait.h
-@comment POSIX.1
@deftypefn Macro int WSTOPSIG (int @var{status})
+@standards{POSIX.1, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
If @code{WIFSTOPPED} is true of @var{status}, this macro returns the
signal number of the signal that caused the child process to stop.
@end deftypefn
@node BSD Wait Functions
-@section BSD Process Wait Functions
-
-@Theglibc{} also provides these related facilities for compatibility
-with BSD Unix. BSD uses the @code{union wait} data type to represent
-status values rather than an @code{int}. The two representations are
-actually interchangeable; they describe the same bit patterns. @Theglibc{}
-defines macros such as @code{WEXITSTATUS} so that they will
-work on either kind of object, and the @code{wait} function is defined
-to accept either type of pointer as its @var{status-ptr} argument.
+@section BSD Process Wait Function
-These functions are declared in @file{sys/wait.h}.
+@Theglibc{} also provides the @code{wait3} function for compatibility
+with BSD. This function is declared in @file{sys/wait.h}. It is the
+predecessor to @code{wait4}, which is more flexible. @code{wait3} is
+now obsolete.
@pindex sys/wait.h
-@comment sys/wait.h
-@comment BSD
-@deftp {Data Type} {union wait}
-This data type represents program termination status values. It has
-the following members:
-
-@table @code
-@item int w_termsig
-The value of this member is the same as that of the
-@code{WTERMSIG} macro.
-
-@item int w_coredump
-The value of this member is the same as that of the
-@code{WCOREDUMP} macro.
-
-@item int w_retcode
-The value of this member is the same as that of the
-@code{WEXITSTATUS} macro.
-
-@item int w_stopsig
-The value of this member is the same as that of the
-@code{WSTOPSIG} macro.
-@end table
-
-Instead of accessing these members directly, you should use the
-equivalent macros.
-@end deftp
-
-The @code{wait3} function is the predecessor to @code{wait4}, which is
-more flexible. @code{wait3} is now obsolete.
-
-@comment sys/wait.h
-@comment BSD
-@deftypefun pid_t wait3 (union wait *@var{status-ptr}, int @var{options}, struct rusage *@var{usage})
+@deftypefun pid_t wait3 (int *@var{status-ptr}, int @var{options}, struct rusage *@var{usage})
+@standards{BSD, sys/wait.h}
+@safety{@prelim{}@mtsafe{}@assafe{}@acsafe{}}
If @var{usage} is a null pointer, @code{wait3} is equivalent to
@code{waitpid (-1, @var{status-ptr}, @var{options})}.
projects / thirdparty / glibc.git / blobdiff