. /etc/sysconfig/rc
. $rc_functions
+eval $(/usr/local/bin/readhash /var/ipfire/main/settings)
+
+if [ "$RRDLOG" = '' ]; then
+ RRDLOG=/var/log/rrd
+fi
+
case "$1" in
start)
+ # If run from init and collectd alrady started then exit silent
+ if [ "$(basename $0)" != "collectd" ]; then
+ if [ "$(ps -A | grep " collectd$")" != "" ]; then
+ exit 0
+ fi
+ fi
+
+ # ARM does not support to scan for sensors. In that case,
+ # we create an empty configuration file.
+ machine=$(uname -m)
+ if [ "${machine:0:3}" = "arm" ]; then
+ touch /etc/sysconfig/lm_sensors
+ fi
+
+ # At first run search for sensors with sensors-detect
if [ ! -e /etc/sysconfig/lm_sensors ]; then
- boot_mesg "Searching for Sensors..."
- "yes" | /usr/sbin/sensors-detect > /dev/null
- evaluate_retval
- if [ ! -e /etc/sysconfig/lm_sensors ]; then
- echo "#No Sensors detected " > /etc/sysconfig/lm_sensors
- fi
+ boot_mesg "Searching for Sensors..."
+
+ # pre scan and try to load modules
+ "yes" | /usr/sbin/sensors-detect > /dev/null
+ if [ -e /etc/sysconfig/lm_sensors ]; then
+
+ # Module load
+ . /etc/sysconfig/lm_sensors
+ for modul in $BUS_MODULES $HWMON_MODULES ; do
+ modprobe $modul > /dev/null 2>&1;
+ done
+ fi
+
+ # Final scan
+ "yes" | /usr/sbin/sensors-detect > /dev/null
+ evaluate_retval
+
+ if [ ! -e /etc/sysconfig/lm_sensors ]; then
+ echo "#No Sensors detected " > /etc/sysconfig/lm_sensors
+ fi
fi
- boot_mesg -n "Loading Sensor Modules..."
- for modul in `cat /etc/sysconfig/lm_sensors | grep '^MODULE_' | cut -d"=" -s -f2`; do
- modprobe $modul > /dev/null 2>&1;
- if [ ${?} = 0 ]; then
- boot_mesg -n "$SUCCESS$modul$NORMAL ";
- else
- boot_mesg -n "$FAILURE$modul$NORMAL ";
- fi
- done
- boot_mesg;
- echo_ok;
-
- boot_mesg "Starting Collection daemon..."
- /usr/sbin/collectd -C /etc/collectd.conf
- evaluate_retval
-#
-# These lines are for furhter implementation of the collectd, atm the temps are
-# collected by the makegraphs script because of the standby functions
-#
-# for disk in `kudzu -qps -c HD | grep device: | cut -d" " -f2 | sort | uniq`; do boot_mesg "Bringing up hddtemp daemon for $disk ..."; /usr/sbin/hddtemp $disk -d -l localhost; evaluate_retval; done
-#
-# Starting the mbmon in deamon mode to enable sensors reading for collectd
-# later mbmon will be replaced by lmsensors, if mbmon is not running on your
-# system, we advise to comment out these lines in order to prevent fail
-#
-# boot_mesg "Bringing up mbmon daemon..."
-# /usr/bin/mbmon -P 411 -r
-# evaluate_retval
- ;;
+ # Load sensor modules only first start
+ if [ ! -e /var/lock/sensors_modules ]; then
+ touch /var/lock/sensors_modules
+
+ boot_mesg -n "Loading Sensor Modules: "
+ . /etc/sysconfig/lm_sensors
+ for modul in $BUS_MODULES $HWMON_MODULES ; do
+ modprobe $modul > /dev/null 2>&1;
+ if [ ${?} = 0 ]; then
+ boot_mesg -n "$SUCCESS$modul$NORMAL ";
+ else
+ boot_mesg -n "$WARNING$modul$NORMAL ";
+ fi
+ done
+ boot_mesg;
+ echo_ok;
+ fi
+
+ # Enable sensors plugin if sensors found
+ if [ "$( sensors 2>&1 | grep 'No sensors found!' | wc -l )" == "1" ]; then
+ sed -i -e "s|^LoadPlugin sensors|#LoadPlugin sensors|g" /etc/collectd.conf
+ else
+ sed -i -e "s|^#LoadPlugin sensors|LoadPlugin sensors|g" /etc/collectd.conf
+ fi
+ # Enable thermal plugin if thermal_zone found
+ if [ ! -e /sys/class/thermal/thermal_zone0 ]; then
+ sed -i -e 's|^include "/etc/collectd.thermal"$|#include "/etc/collectd.thermal"|g' /etc/collectd.conf
+ else
+ sed -i -e 's|^#include "/etc/collectd.thermal"$|include "/etc/collectd.thermal"|g' /etc/collectd.conf
+ fi
+
+ # Enable swap plugin if swap found
+ if [ "$(swapon -s | wc -l)" == "0" ]; then
+ sed -i -e "s|^LoadPlugin swap|#LoadPlugin swap|g" /etc/collectd.conf
+ else
+ sed -i -e "s|^#LoadPlugin swap|LoadPlugin swap|g" /etc/collectd.conf
+ fi
+
+ # sync after config update...
+ sync
+
+ if [ $(date +%Y) -gt 2011 ]; then
+ boot_mesg "Starting Collection daemon..."
+ /usr/sbin/collectd -C /etc/collectd.conf
+ evaluate_retval
+ else
+ boot_mesg "collectd: cannot start with incorrect time ($(date))."
+ echo_warning;
+ fi
+ ;;
stop)
-# if mbmon is not running on your system, we advise to comment out these lines
-# in order to prevent fail
-# boot_mesg "Stopping mbmon daemon..."
-# killproc /usr/bin/mbmon
-# evaluate_retval
-# boot_mesg "Stopping hddtemp daemon..."
-# killproc /usr/sbin/hddtemp
-# evaluate_retval
boot_mesg "Stopping Collection daemon..."
killproc /usr/sbin/collectd
evaluate_retval
+ # Save the ramdisk at manual stop but not at shutdown
+ if [ "$(basename $0)" == "collectd" ]; then
+ /etc/init.d/tmpfs backup
+ fi
+ # sync after backup...
+ sync
;;
-
restart)
-
-#
-# We need to do this that way because mbmon doesn`t clear the port when killed
-# so the next startup it fails with port allready in use -> donĀ“t restart mbmon
-#
- boot_mesg "Stopping Collection daemon..."
- killproc /usr/sbin/collectd
- evaluate_retval
+ ${0} stop
sleep 1
- boot_mesg "Starting Collection daemon..."
- /usr/sbin/collectd -C /etc/collectd.conf
- evaluate_retval
- ;;
-
+ ${0} start
+ ;;
status)
statusproc /usr/sbin/collectd
;;