. /etc/sysconfig/rc
. ${rc_functions}
+CHANNEL="05"
+COUNTRY="00"
+TXPOWER="auto"
+INTERFACE="blue0"
+MACMODE="0"
+
+eval $(/usr/local/bin/readhash /var/ipfire/wlanap/settings)
+
case "${1}" in
- start)
- boot_mesg "Starting hostapd... "
+ start)
mkdir -p /var/run/hostapd
- # enable wlan module of collectd
- sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
- # Set Atheros Card to master mode
- /usr/bin/wlanconfig blue0 destroy > /dev/null
- /usr/bin/wlanconfig blue0 create wlandev wifi0 wlanmode ap > /dev/null
+ boot_mesg "Starting hostapd... "
- # Set other cards to master mode
- #/usr/sbin/iwconfig blue0 mode master
+ # Check Interface configuration
+ if ! ip link show $INTERFACE > /dev/null 2>&1; then
+ boot_mesg "Interface $INTERFACE doesn't exist." ${FAILURE}
+ echo_failure
+ exit 0
+ fi
+ if [ "$(ip link show $INTERFACE | /bin/grep "ether")" == "" ]; then
+ boot_mesg "Interface $INTERFACE is assigned to wlan master device." ${FAILURE}
+ boot_mesg "Please reboot to fix this." ${FAILURE}
+ echo_failure
+ exit 0
+ fi
+ if [ "$(iwconfig $INTERFACE | /bin/grep "IEEE")" == "" ]; then
+ boot_mesg "Interface $INTERFACE is no wireless device." ${FAILURE}
+ echo_failure
+ exit 0
+ fi
- if [ "$(/usr/sbin/iwconfig blue0 | /bin/grep "Mode:Master")" == "" ]; then
- boot_mesg "Error! Can't set wlan master mode"
- echo_failure;
- exit 1;
+ # Detect driver
+ if [ -e "/sys/class/net/$INTERFACE/phy80211" ]; then
+ DRIVER="NL80211"
+ driver="nl80211"
+ elif [ -e "/sys/class/net/$INTERFACE/madwifi_name_type" ]; then
+ DRIVER="MADWIFI"
+ driver="madwifi"
+ elif [ "$(/bin/grep hostap /sys/class/net/$INTERFACE/uevent)" != "" ]; then
+ DRIVER="HOSTAP"
+ driver="hostap"
else
- /usr/sbin/iwconfig blue0 channel 05
- /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
- evaluate_retval
+ boot_mesg "Interface $INTERFACE is a not supported wireless device." ${FAILURE}
+ echo_failure
+ exit 0
fi
- ;;
- stop)
- boot_mesg "Stopping hostapd..."
+ echo driver=$driver > /etc/hostapd.conf.tmp
+ grep -v "^driver=" /etc/hostapd.conf >> /etc/hostapd.conf.tmp
+ mv /etc/hostapd.conf.tmp /etc/hostapd.conf
+
+ echo DRIVER=$DRIVER > /var/ipfire/wlanap/settings.tmp
+ grep -v "^DRIVER=" /var/ipfire/wlanap/settings >> /var/ipfire/wlanap/settings.tmp
+ chown nobody:nobody /var/ipfire/wlanap/settings.tmp
+ chmod 644 /var/ipfire/wlanap/settings.tmp
+ mv /var/ipfire/wlanap/settings.tmp /var/ipfire/wlanap/settings
+
+ if [ "$DRIVER" == "MADWIFI" ]; then
+ if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+ boot_mesg "Setting MADWIFI wlan $INTERFACE to Master mode... "
+ # Set Atheros Cards to master mode
+ /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
+ /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+ fi
+ elif [ "$DRIVER" == "HOSTAP" ]; then
+ if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+ boot_mesg "Setting HOSTAP wlan $INTERFACE to Master mode... "
+ # Set Prism Cards to master mode
+ /usr/bin/iwconfig $INTERFACE mode master > /dev/null
+ fi
+ fi
- # Set Atheros Card to Managed mode
- /usr/bin/wlanconfig blue0 destroy > /dev/null
- /usr/bin/wlanconfig blue0 create wlandev wifi0 wlanmode sta > /dev/null
+ # First set to any country then reset to World (00)
+ # and then set new country because the card is only
+ # reprogrammed if the region was changed.
+ /usr/sbin/iw reg set DE
+ /usr/sbin/iw reg set 00
+ /usr/sbin/iw reg set $COUNTRY
- # Set other cards to master mode
- #/usr/sbin/iwconfig blue0 mode Managed
+ /usr/sbin/iwconfig $INTERFACE channel $CHANNEL 2>/dev/null
+ /usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
+
+ /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf >/dev/null 2>&1 &
+
+ sleep 2
+
+ if [ $DRIVER == "MADWIFI" ]; then
+ iwpriv $INTERFACE maccmd 3
+ if [ $MACMODE != 0 ]; then
+ FILE="/var/ipfire/wlanap/macfile"
+ exec < $FILE
+ while read LINE
+ do
+ iwpriv $INTERFACE addmac $LINE
+ done
+
+ iwpriv $INTERFACE maccmd $MACMODE
+ fi
+ fi
+
+ sleep 2
+
+ if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+ boot_mesg "Error! Can't set wlan master mode"
+ echo_failure;
+ exit 0;
+ else
+ echo_ok
+ fi
+ ;;
+
+ stop)
+ boot_mesg "Stopping hostapd..."
- killproc /usr/bin/hostapd
- evaluate_retval
- ;;
+ killproc /usr/bin/hostapd
+ evaluate_retval
+ ;;
- restart)
- ${0} stop
- sleep 1
- ${0} start
- ;;
+ restart)
+ ${0} stop
+ sleep 1
+ ${0} start
+ ;;
- status)
- statusproc /usr/bin/hostapd
- ;;
+ status)
+ statusproc /usr/bin/hostapd
+ ;;
- *)
- echo "Usage: ${0} {start|stop|restart|status}"
- exit 1
- ;;
+ *)
+ echo "Usage: ${0} {start|stop|restart|status}"
+ exit 1
+ ;;
esac