Change installation-tar compression from bzip2 to lzma.

[people/teissler/ipfire-2.x.git] / src / install+setup / install / mountdest.sh

diff --git a/src/install+setup/install/mountdest.sh b/src/install+setup/install/mountdest.sh
index 3e4f4d3a533e21ed3e10207a5701229d7f559c6d..a8242330b77e7fb2b967dac6c60d2591d3e7b6ce 100644 (file)
--- a/src/install+setup/install/mountdest.sh
+++ b/src/install+setup/install/mountdest.sh
@@ -1,4 +1,23 @@
 #!/bin/sh
+###############################################################################
+#                                                                             #
+# IPFire.org - A linux based firewall                                         #
+# Copyright (C) 2007  Michael Tremer & Christian Schmidt                      #
+#                                                                             #
+# This program is free software: you can redistribute it and/or modify        #
+# it under the terms of the GNU General Public License as published by        #
+# the Free Software Foundation, either version 3 of the License, or           #
+# (at your option) any later version.                                         #
+#                                                                             #
+# This program is distributed in the hope that it will be useful,             #
+# but WITHOUT ANY WARRANTY; without even the implied warranty of              #
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the               #
+# GNU General Public License for more details.                                #
+#                                                                             #
+# You should have received a copy of the GNU General Public License           #
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.       #
+#                                                                             #
+###############################################################################
 
 echo "Scanning for possible destination drives"
 
@@ -6,31 +25,39 @@ echo "Scanning for possible destination drives"
 echo "--> IDE"
 for DEVICE in $(kudzu -qps -t 30 -c HD -b IDE | grep device: | cut -d ' ' -f 2 | sort | uniq); do
                mount /dev/${DEVICE}1 /harddisk 2> /dev/null
-               if [ -n "$(ls /harddisk/ipfire-*.tbz2 2>/dev/null)" ]; then
+               if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
                        umount /harddisk 2> /dev/null
-                       echo "${DEVICE} is source drive - SKIP"
+                       echo "${DEVICE}1 is source drive - SKIP"
                        continue
                else
                        umount /harddisk 2> /dev/null
                        echo -n "$DEVICE" > /tmp/dest_device
                        echo "${DEVICE} - yes, it is our destination"
-                       exit 0
+                       exit 0 # IDE / use DEVICE for grub
                fi
 done
 
 # scan USB/SCSI devices
 echo "--> USB/SCSI"
 for DEVICE in $(kudzu -qps -t 30 -c HD -b SCSI | grep device: | cut -d ' ' -f 2 | sort | uniq); do
-               mount /dev/${DEVICE}1 /harddisk 2> /dev/null
-               if [ -n "$(ls /harddisk/ipfire-*.tbz2 2>/dev/null)" ]; then
+               mount /dev/${DEVICE} /harddisk 2> /dev/null
+               if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
                        umount /harddisk 2> /dev/null
                        echo "${DEVICE} is source drive - SKIP"
                        continue
                else
                        umount /harddisk 2> /dev/null
-                       echo -n "$DEVICE" > /tmp/dest_device
-                       echo "${DEVICE} - yes, it is our destination"
-                       exit 1
+                       mount /dev/${DEVICE}1 /harddisk 2> /dev/null
+                       if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
+                               umount /harddisk 2> /dev/null
+                               echo "${DEVICE}1 is source drive - SKIP"
+                               continue
+                       else
+                               umount /harddisk 2> /dev/null
+                               echo -n "$DEVICE" > /tmp/dest_device
+                               echo "${DEVICE} - yes, it is our destination"
+                               exit 1 # SCSI/USB (always use /dev/sda as bootdevicename)
+                       fi
                fi
 done
 
@@ -38,16 +65,60 @@ done
 echo "--> RAID"
 for DEVICE in $(kudzu -qps -t 30 -c HD -b RAID | grep device: | cut -d ' ' -f 2 | sort | uniq); do
                mount /dev/${DEVICE}p1 /harddisk 2> /dev/null
-               if [ -n "$(ls /harddisk/ipfire-*.tbz2 2>/dev/null)" ]; then
+               if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
                        umount /harddisk 2> /dev/null
-                       echo "${DEVICE} is source drive - SKIP"
+                       echo "${DEVICE}p1 is source drive - SKIP"
                        continue
                else
                        umount /harddisk 2> /dev/null
-                       echo -n "$DEVICE" > /tmp/dest_device
-                       echo "${DEVICE} - yes, it is our destination"
-                       exit 2
+                       mount /dev/${DEVICE}1 /harddisk 2> /dev/null
+                       if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
+                               umount /harddisk 2> /dev/null
+                               echo "${DEVICE}1 is source drive - SKIP"
+                               continue
+                       else
+                               umount /harddisk 2> /dev/null
+                               mount /dev/${DEVICE} /harddisk 2> /dev/null
+                               if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
+                                       umount /harddisk 2> /dev/null
+                                       echo "${DEVICE} is source drive - SKIP"
+                                       continue
+                               else
+                                       echo -n "$DEVICE" > /tmp/dest_device
+                                       echo "${DEVICE} - yes, it is our destination"
+                                       exit 2 # Raid ( /dev/device/diskx )
+                               fi
+                       fi
                fi
 done
 
+# Virtio devices
+echo "--> Virtio"
+for DEVICE in vda vdb vdc vdd; do
+               if [ ! -e /dev/${DEVICE} ]; then
+                       continue
+               else
+                       mount /dev/${DEVICE} /harddisk 2> /dev/null
+                       if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
+                               umount /harddisk 2> /dev/null
+                               echo "${DEVICE} is source drive - SKIP"
+                               continue
+                       else
+                               umount /harddisk 2> /dev/null
+                               mount /dev/${DEVICE}1 /harddisk 2> /dev/null
+                               if [ -n "$(ls /harddisk/ipfire-*.tlz 2>/dev/null)" ]; then
+                                       umount /harddisk 2> /dev/null
+                                       echo "${DEVICE}1 is source drive - SKIP"
+                                       continue
+                               else
+                                       umount /harddisk 2> /dev/null
+                                       echo -n "$DEVICE" > /tmp/dest_device
+                                       echo "${DEVICE} - yes, it is our destination"
+                                       exit 0 # like ide / use device for grub
+                               fi
+                       fi
+               fi
+done
+
+
 exit 10 # Nothing found