-# SSL tests
+SSL tests
+=========
SSL testcases are configured in the `ssl-tests` directory.
-Each `ssl_*.conf.in` file contains a number of test configurations. These files
+Each `ssl_*.cnf.in` file contains a number of test configurations. These files
are used to generate testcases in the OpenSSL CONF format.
The precise test output can be dependent on the library configuration. The test
However, for verification, we also include checked-in configuration outputs
corresponding to the default configuration. These testcases live in
-`test/ssl-tests/*.conf` files. Therefore, whenever you're adding or updating a
-generated test, you should run
+`test/ssl-tests/*.cnf` files.
-```
-$ ./config
-$ cd test
-$ TOP=.. perl -I testlib/ generate_ssl_tests.pl ssl-tests/my.conf.in \
- > ssl-tests/my.conf
-```
+For more details, see `ssl-tests/01-simple.cnf.in` for an example.
-where `my.conf.in` is your test input file.
-
-For example, to generate the test cases in `ssl-tests/01-simple.conf.in`, do
-
-```
-$ TOP=.. perl generate_ssl_tests.pl ssl-tests/01-simple.conf.in > ssl-tests/01-simple.conf
-```
-
-For more details, see `ssl-tests/01-simple.conf.in` for an example.
-
-## Configuring the test
+Configuring the test
+--------------------
First, give your test a name. The names do not have to be unique.
An example test input looks like this:
-```
{
name => "test-default",
server => { "CipherString" => "DEFAULT" },
client => { "CipherString" => "DEFAULT" },
test => { "ExpectedResult" => "Success" },
}
-```
-The test section supports the following options:
+The test section supports the following options
+
+### Test mode
+
+* Method - the method to test. One of DTLS or TLS.
+
+* HandshakeMode - which handshake flavour to test:
+ - Simple - plain handshake (default)
+ - Resume - test resumption
+ - RenegotiateServer - test server initiated renegotiation
+ - RenegotiateClient - test client initiated renegotiation
+
+When HandshakeMode is Resume or Renegotiate, the original handshake is expected
+to succeed. All configured test expectations are verified against the second
+handshake.
+
+* ApplicationData - amount of application data bytes to send (integer, defaults
+ to 256 bytes). Applies to both client and server. Application data is sent in
+ 64kB chunks (but limited by MaxFragmentSize and available parallelization, see
+ below).
+
+* MaxFragmentSize - maximum send fragment size (integer, defaults to 512 in
+ tests - see `SSL_CTX_set_max_send_fragment` for documentation). Applies to
+ both client and server. Lowering the fragment size will split handshake and
+ application data up between more `SSL_write` calls, thus allowing to exercise
+ different code paths. In particular, if the buffer size (64kB) is at least
+ four times as large as the maximum fragment, interleaved multi-buffer crypto
+ implementations may be used on some platforms.
+
+### Test expectations
* ExpectedResult - expected handshake outcome. One of
- Success - handshake success
- ClientFail - clientside handshake failure
- InternalError - some other error
-* ClientAlert, ServerAlert - expected alert. See `ssl_test_ctx.c` for known
- values.
+* ExpectedClientAlert, ExpectedServerAlert - expected alert. See
+ `test/helpers/ssl_test_ctx.c` for known values. Note: the expected alert is currently
+ matched against the _last_ received alert (i.e., a fatal alert or a
+ `close_notify`). Warning alert expectations are not yet supported. (A warning
+ alert will not be correctly matched, if followed by a `close_notify` or
+ another alert.)
-* Protocol - expected negotiated protocol. One of
+* ExpectedProtocol - expected negotiated protocol. One of
SSLv3, TLSv1, TLSv1.1, TLSv1.2.
+* SessionTicketExpected - whether or not a session ticket is expected
+ - Ignore - do not check for a session ticket (default)
+ - Yes - a session ticket is expected
+ - No - a session ticket is not expected
+
+* SessionIdExpected - whether or not a session id is expected
+ - Ignore - do not check for a session id (default)
+ - Yes - a session id is expected
+ - No - a session id is not expected
+
+* ResumptionExpected - whether or not resumption is expected (Resume mode only)
+ - Yes - resumed handshake
+ - No - full handshake (default)
+
+* ExpectedNPNProtocol, ExpectedALPNProtocol - NPN and ALPN expectations.
+
+* ExpectedTmpKeyType - the expected algorithm or curve of server temp key
+
+* ExpectedServerCertType, ExpectedClientCertType - the expected algorithm or
+ curve of server or client certificate
+
+* ExpectedServerSignHash, ExpectedClientSignHash - the expected
+ signing hash used by server or client certificate
+
+* ExpectedServerSignType, ExpectedClientSignType - the expected
+ signature type used by server or client when signing messages
+
+* ExpectedClientCANames - for client auth list of CA names the server must
+ send. If this is "empty" the list is expected to be empty otherwise it
+ is a file of certificates whose subject names form the list.
+
+* ExpectedServerCANames - list of CA names the client must send, TLS 1.3 only.
+ If this is "empty" the list is expected to be empty otherwise it is a file
+ of certificates whose subject names form the list.
+
+Configuring the client and server
+---------------------------------
+
+The client and server configurations can be any valid `SSL_CTX`
+configurations. For details, see the manpages for `SSL_CONF_cmd`.
+
+Give your configurations as a dictionary of CONF commands, e.g.
+
+ server => {
+ "CipherString" => "DEFAULT",
+ "MinProtocol" => "TLSv1",
+ }
+
+The following sections may optionally be defined:
+
+* server2 - this section configures a secondary context that is selected via the
+ ServerName test option. This context is used whenever a ServerNameCallback is
+ specified. If the server2 section is not present, then the configuration
+ matches server.
+* resume_server - this section configures the client to resume its session
+ against a different server. This context is used whenever HandshakeMode is
+ Resume. If the resume_server section is not present, then the configuration
+ matches server.
+* resume_client - this section configures the client to resume its session with
+ a different configuration. In practice this may occur when, for example,
+ upgraded clients reuse sessions persisted on disk. This context is used
+ whenever HandshakeMode is Resume. If the resume_client section is not present,
+ then the configuration matches client.
+
+### Configuring callbacks and additional options
+
+Additional handshake settings can be configured in the `extra` section of each
+client and server:
+
+ client => {
+ "CipherString" => "DEFAULT",
+ extra => {
+ "ServerName" => "server2",
+ }
+ }
+
+#### Supported client-side options
+
* ClientVerifyCallback - the client's custom certificate verify callback.
Used to test callback behaviour. One of
+ - None - no custom callback (default)
- AcceptAll - accepts all certificates.
- RejectAll - rejects all certificates.
-* Method - the method to test. One of DTLS or TLS.
-
* ServerName - the server the client should attempt to connect to. One of
- None - do not use SNI (default)
- server1 - the initial context
- server2 - the secondary context
+ - invalid - an unknown context
-* SessionTicketExpected - whether or not a session ticket is expected
- - Ignore - do not check for a session ticket (default)
- - Yes - a session ticket is expected
- - No - a session ticket is not expected
- - Broken - a special test case where the session ticket callback does not initialize crypto
+* CTValidation - Certificate Transparency validation strategy. One of
+ - None - no validation (default)
+ - Permissive - SSL_CT_VALIDATION_PERMISSIVE
+ - Strict - SSL_CT_VALIDATION_STRICT
-## Configuring the client and server
+#### Supported server-side options
-The client and server configurations can be any valid `SSL_CTX`
-configurations. For details, see the manpages for `SSL_CONF_cmd`.
+* ServerNameCallback - the SNI switching callback to use
+ - None - no callback (default)
+ - IgnoreMismatch - continue the handshake on SNI mismatch
+ - RejectMismatch - abort the handshake on SNI mismatch
-Give your configurations as a dictionary of CONF commands, e.g.
+* BrokenSessionTicket - a special test case where the session ticket callback
+ does not initialize crypto.
+ - No (default)
+ - Yes
+
+#### Mutually supported options
-```
-server => {
- "CipherString" => "DEFAULT",
- "MinProtocol" => "TLSv1",
-}
-```
+* NPNProtocols, ALPNProtocols - NPN and ALPN settings. Server and client
+ protocols can be specified as a comma-separated list, and a callback with the
+ recommended behaviour will be installed automatically.
-A server2 section may optionally be defined to configure a secondary
-context that is selected via the ServerName test option. If the server2
-section is not configured, then the configuration matches server.
+* SRPUser, SRPPassword - SRP settings. For client, this is the SRP user to
+ connect as; for server, this is a known SRP user.
### Default server and client configurations
You can override these options by redefining them:
-```
-client => {
- "VerifyCAFile" => "/path/to/custom/file"
-}
-```
+ client => {
+ "VerifyCAFile" => "/path/to/custom/file"
+ }
or by deleting them
-```
-client => {
- "VerifyCAFile" => undef
-}
-```
+ client => {
+ "VerifyCAFile" => undef
+ }
+
+Adding a test to the test harness
+---------------------------------
+
+1. Add a new test configuration to `test/ssl-tests`, following the examples of
+ existing `*.cnf.in` files (for example, `01-simple.cnf.in`).
+
+2. Generate the generated `*.cnf` test input file. You can do so by running
+ `generate_ssl_tests.pl`:
+
+ $ ./config
+ $ cd test
+ $ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
+ ssl-tests/my.cnf.in default > ssl-tests/my.cnf
+
+where `my.cnf.in` is your test input file and `default` is the provider to use.
+For all the pre-generated test files you should use the default provider.
+
+For example, to generate the test cases in `ssl-tests/01-simple.cnf.in`, do
+
+ $ TOP=.. perl -I ../util/perl/ generate_ssl_tests.pl \
+ ssl-tests/01-simple.cnf.in default > ssl-tests/01-simple.cnf
+
+Alternatively (hackish but simple), you can comment out
-## Adding a test to the test harness
+ unlink glob $tmp_file;
-Add your configuration file to `test/recipes/80-test_ssl_new.t`.
+in `test/recipes/80-test_ssl_new.t` and run
-## Running the tests with the test harness
+ $ make TESTS=test_ssl_new test
-```
-HARNESS_VERBOSE=yes make TESTS=test_ssl_new test
-```
+This will save the generated output in a `*.tmp` file in the build directory.
-## Running a test manually
+3. Update the number of tests planned in `test/recipes/80-test_ssl_new.t`. If
+ the test suite has any skip conditions, update those too (see
+ `test/recipes/80-test_ssl_new.t` for details).
+
+Running the tests with the test harness
+---------------------------------------
+
+ HARNESS_VERBOSE=yes make TESTS=test_ssl_new test
+
+Running a test manually
+-----------------------
These steps are only needed during development. End users should run `make test`
or follow the instructions above to run the SSL test suite.
environment variable to point to the location of the certs. E.g., from the root
OpenSSL directory, do
-```
-$ TEST_CERTS_DIR=test/certs test/ssl_test test/ssl-tests/01-simple.conf
-```
+ $ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs test/ssl_test \
+ test/ssl-tests/01-simple.cnf default
or for shared builds
-```
-$ TEST_CERTS_DIR=test/certs util/shlib_wrap.sh test/ssl_test \
- test/ssl-tests/01-simple.conf
-```
+ $ CTLOG_FILE=test/ct/log_list.cnf TEST_CERTS_DIR=test/certs \
+ util/wrap.pl test/ssl_test test/ssl-tests/01-simple.cnf default
+
+In the above examples, `default` is the provider to use.
Note that the test expectations sometimes depend on the Configure settings. For
example, the negotiated protocol depends on the set of available (enabled)
just run `make test` do not need any extra steps.
However, when running a test manually, keep in mind that the repository version
-of the generated `test/ssl-tests/*.conf` correspond to expected outputs in with
+of the generated `test/ssl-tests/*.cnf` correspond to expected outputs in with
the default Configure options. To run `ssl_test` manually from the command line
in a build with a different configuration, you may need to generate the right
-`*.conf` file from the `*.conf.in` input first.
+`*.cnf` file from the `*.cnf.in` input first.
+
+Running a test manually via make
+--------------------------------
+
+Individual tests may be run by adding the SSL_TESTS variable to the `make`
+command line. The SSL_TESTS variable is set to the list of input (or ".in")
+files. The values in SSL_TESTS are globbed.
+
+ $ make test TESTS=test_ssl_new SSL_TESTS="0*.cnf.in"
+
+ $ make test TESTS=test_ssl_new SSL_TESTS="01-simple.cnf.in 05-sni.cnf.in"