KVERSION=${KVERSION-$(uname -r)}
# Uncomment this to debug failures
-DEBUGFAIL="rdshell"
+#DEBUGFAIL="rd.shell"
#DEBUGFAIL="$DEBUGFAIL udev.log-priority=debug"
client_run() {
echo "CLIENT TEST START: $@"
- $testdir/run-qemu -hda root.ext2 -hdb disk1 -hdc disk2 -m 256M -nographic \
- -net none -kernel /boot/vmlinuz-$KVERSION \
- -append "$@ root=LABEL=root rw quiet rd_retry=5 rdinitdebug console=ttyS0,115200n81 selinux=0 rdinfo $DEBUGFAIL" \
- -initrd initramfs.testing
- if ! grep -m 1 -q dracut-root-block-success root.ext2; then
+ $testdir/run-qemu \
+ -drive format=raw,index=0,media=disk,file=$TESTDIR/root.ext2 \
+ -drive format=raw,index=1,media=disk,file=$TESTDIR/disk1 \
+ -drive format=raw,index=2,media=disk,file=$TESTDIR/disk2 \
+ -m 256M -nographic \
+ -net none \
+ -append "$* root=LABEL=root rw debug rd.retry=5 rd.debug console=ttyS0,115200n81 selinux=0 rd.info $DEBUGFAIL" \
+ -initrd $TESTDIR/initramfs.testing
+ if ! grep -F -m 1 -q dracut-root-block-success $TESTDIR/root.ext2; then
echo "CLIENT TEST END: $@ [FAIL]"
return 1;
fi
- sed -i -e 's#dracut-root-block-success#dracut-root-block-xxxxxxx#' root.ext2
+ sed -i -e 's#dracut-root-block-success#dracut-root-block-xxxxxxx#' $TESTDIR/root.ext2
echo "CLIENT TEST END: $@ [OK]"
return 0
}
test_run() {
- client_run rd_NO_MDIMSM || return 1
- client_run || return 1
- client_run rd_NO_DM || return 1
+ read MD_UUID < $TESTDIR/mduuid
+ client_run rd.auto rd.md.imsm=0 || return 1
+ client_run rd.auto rd.md.uuid=$MD_UUID rd.dm=0 || return 1
# This test succeeds, because the mirror parts are found without
# assembling the mirror itsself, which is what we want
- client_run rd_NO_MD rd_NO_MDIMSM failme && return 1
- client_run rd_NO_MD failme && return 1
+ client_run rd.auto rd.md.uuid=$MD_UUID rd.md=0 rd.md.imsm failme && return 1
+ client_run rd.auto rd.md.uuid=$MD_UUID rd.md=0 failme && return 1
# the following test hangs on newer md
- #client_run rd_NO_DM rd_NO_MDIMSM rd_NO_MDADMCONF || return 1
+ client_run rd.auto rd.md.uuid=$MD_UUID rd.dm=0 rd.md.imsm rd.md.conf=0 || return 1
return 0
}
test_setup() {
+
# Create the blank file to use as a root filesystem
- dd if=/dev/zero of=root.ext2 bs=1M count=1
- dd if=/dev/zero of=disk1 bs=1M count=40
- dd if=/dev/zero of=disk2 bs=1M count=40
+ rm -f -- $TESTDIR/root.ext2
+ rm -f -- $TESTDIR/disk1
+ rm -f -- $TESTDIR/disk2
+ dd if=/dev/null of=$TESTDIR/root.ext2 bs=1M seek=1
+ dd if=/dev/null of=$TESTDIR/disk1 bs=1M seek=80
+ dd if=/dev/null of=$TESTDIR/disk2 bs=1M seek=80
kernel=$KVERSION
# Create what will eventually be our root filesystem onto an overlay
(
- initdir=overlay/source
- . $basedir/dracut-functions
- dracut_install sh df free ls shutdown poweroff stty cat ps ln ip route \
- /lib/terminfo/l/linux mount dmesg ifconfig dhclient mkdir cp ping dhclient
- inst "$basedir/modules.d/40network/dhclient-script" "/sbin/dhclient-script"
- inst "$basedir/modules.d/40network/ifup" "/sbin/ifup"
- dracut_install grep
- inst ./test-init /sbin/init
- find_binary plymouth >/dev/null && dracut_install plymouth
- (cd "$initdir"; mkdir -p dev sys proc etc var/run tmp )
+ export initdir=$TESTDIR/overlay/source
+ . $basedir/dracut-functions.sh
+ (
+ cd "$initdir"
+ mkdir -p -- dev sys proc etc var/run tmp
+ mkdir -p root usr/bin usr/lib usr/lib64 usr/sbin
+ for i in bin sbin lib lib64; do
+ ln -sfnr usr/$i $i
+ done
+ )
+ inst_multiple sh df free ls shutdown poweroff stty cat ps ln ip route \
+ mount dmesg ifconfig dhclient mkdir cp ping dhclient
+ for _terminfodir in /lib/terminfo /etc/terminfo /usr/share/terminfo; do
+ [ -f ${_terminfodir}/l/linux ] && break
+ done
+ inst_multiple -o ${_terminfodir}/l/linux
+ inst_simple /etc/os-release
+ inst "$basedir/modules.d/40network/dhclient-script.sh" "/sbin/dhclient-script"
+ inst "$basedir/modules.d/40network/ifup.sh" "/sbin/ifup"
+ inst_multiple grep
+ inst ./test-init.sh /sbin/init
+ find_binary plymouth >/dev/null && inst_multiple plymouth
cp -a /etc/ld.so.conf* $initdir/etc
+ mkdir $initdir/run
sudo ldconfig -r "$initdir"
)
-
+
# second, install the files needed to make the root filesystem
(
- initdir=overlay
- . $basedir/dracut-functions
- dracut_install sfdisk mke2fs poweroff cp umount
- inst_simple ./create-root.sh /initqueue/01create-root.sh
+ export initdir=$TESTDIR/overlay
+ . $basedir/dracut-functions.sh
+ inst_multiple sfdisk mke2fs poweroff cp umount grep
+ inst_hook initqueue 01 ./create-root.sh
inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
)
-
+
# create an initramfs that will create the target root filesystem.
# We do it this way so that we do not risk trashing the host mdraid
# devices, volume groups, encrypted partitions, etc.
- $basedir/dracut -l -i overlay / \
- -m "dash lvm mdraid dmraid udev-rules base rootfs-block kernel-modules" \
+ $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+ -m "dash lvm mdraid dmraid udev-rules base rootfs-block fs-lib kernel-modules" \
-d "piix ide-gd_mod ata_piix ext2 sd_mod dm-multipath dm-crypt dm-round-robin faulty linear multipath raid0 raid10 raid1 raid456" \
- -f initramfs.makeroot $KVERSION || return 1
- rm -rf overlay
+ --no-hostonly-cmdline -N \
+ -f $TESTDIR/initramfs.makeroot $KVERSION || return 1
+ rm -rf -- $TESTDIR/overlay
# Invoke KVM and/or QEMU to actually create the target filesystem.
- $testdir/run-qemu -hda root.ext2 -hdb disk1 -hdc disk2 -m 256M -nographic -net none \
- -kernel "/boot/vmlinuz-$kernel" \
+ $testdir/run-qemu \
+ -drive format=raw,index=0,media=disk,file=$TESTDIR/root.ext2 \
+ -drive format=raw,index=1,media=disk,file=$TESTDIR/disk1 \
+ -drive format=raw,index=2,media=disk,file=$TESTDIR/disk2 \
+ -m 256M -nographic -net none \
-append "root=/dev/dracut/root rw rootfstype=ext2 quiet console=ttyS0,115200n81 selinux=0" \
- -initrd initramfs.makeroot || return 1
- grep -m 1 -q dracut-root-block-created root.ext2 || return 1
+ -initrd $TESTDIR/initramfs.makeroot || return 1
+ grep -F -m 1 -q dracut-root-block-created $TESTDIR/root.ext2 || return 1
+ eval $(grep -F --binary-files=text -m 1 MD_UUID $TESTDIR/root.ext2)
+ echo $MD_UUID > $TESTDIR/mduuid
(
- initdir=overlay
- . $basedir/dracut-functions
- dracut_install poweroff shutdown
- inst_simple ./hard-off.sh /emergency/01hard-off.sh
+ export initdir=$TESTDIR/overlay
+ . $basedir/dracut-functions.sh
+ inst_multiple poweroff shutdown
+ inst_hook emergency 000 ./hard-off.sh
inst_simple ./99-idesymlinks.rules /etc/udev/rules.d/99-idesymlinks.rules
)
- sudo $basedir/dracut -l -i overlay / \
- -o "plymouth network" \
+ sudo $basedir/dracut.sh -l -i $TESTDIR/overlay / \
+ -o "plymouth network kernel-network-modules" \
-a "debug" \
-d "piix ide-gd_mod ata_piix ext2 sd_mod" \
- -f initramfs.testing $KVERSION || return 1
+ --no-hostonly-cmdline -N \
+ -f $TESTDIR/initramfs.testing $KVERSION || return 1
}
test_cleanup() {
- rm -fr overlay mnt
- rm -f root.ext2 initramfs.makeroot initramfs.testing
- rm -f disk1 disk2
+ return 0
}
. $testdir/test-functions
projects / thirdparty / dracut.git / blobdiff