KUP4K MPC855
KUP4X MPC859
+Gabriel Huau <contact@huau-gabriel.fr>
+
+ mini2440 s3c2440
+
Gary Jennejohn <garyj@denx.de>
quad100hd PPC405EP
am3517_crane ARM ARMV7 (AM35x SoC)
+Dinh Nguyen <dinguyen@altera.com>
+Chin Liang See <clsee@altera.com>
+
+ socfpga socfpga_cyclone5
+
Sandeep Paulraj <s-paulraj@ti.com>
davinci_dm355evm ARM926EJS
Luka Perkov <uboot@lukaperkov.net>
ib62x0 ARM926EJS
+ iconnect ARM926EJS
Dave Peverley <dpeverley@mpc-data.co.uk>
Stefan Roese <sr@denx.de>
+ x600 ARM926EJS (spear600 Soc)
+
pdnb3 xscale/ixp
scpu xscale/ixp
Bo Shen <voice.shen@atmel.com>
at91sam9x5ek ARM926EJS (AT91SAM9G15,G25,G35,X25,X35 SoC)
+Michal Simek <monstr@monstr.eu>
+
+ zynq ARM ARMV7 (Zynq SoC)
+
Nick Thompson <nick.thompson@gefanuc.com>
da830evm ARM926EJS (DA830/OMAP-L137)
SMDK6400 ARM1176 (S3C6400 SoC)
+Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+
+ kzm9g SH73A0 (RMOBILE SoC)
+
+Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+
+ armadillo-800eva R8A7740 (RMOBILE SoC)
+
-------------------------------------------------------------------------
Unknown / orphaned boards:
ifndef CONFIG_NAND_SPL
LDFLAGS_u-boot += -pie
endif
+
+#
+# FIXME: binutils versions < 2.22 have a bug in the assembler where
+# branches to weak symbols can be incorrectly optimized in thumb mode
+# to a short branch (b.n instruction) that won't reach when the symbol
+# gets preempted
+#
+# http://sourceware.org/bugzilla/show_bug.cgi?id=12532
+#
+ifeq ($(CONFIG_SYS_THUMB_BUILD),y)
+ifeq ($(GAS_BUG_12532),)
+export GAS_BUG_12532:=$(shell if [ $(call binutils-version) -lt 0222 ] ; \
+ then echo y; else echo n; fi)
+endif
+ifeq ($(GAS_BUG_12532),y)
+PLATFORM_RELFLAGS += -fno-optimize-sibling-calls
+endif
+endif
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
DECLARE_GLOBAL_DATA_PTR;
-#define KW_REG_CPUCS_WIN_BAR(x) (KW_REGISTER(0x1500) + (x * 0x08))
-#define KW_REG_CPUCS_WIN_SZ(x) (KW_REGISTER(0x1504) + (x * 0x08))
+struct kw_sdram_bank {
+ u32 win_bar;
+ u32 win_sz;
+};
+
+struct kw_sdram_addr_dec {
+ struct kw_sdram_bank sdram_bank[4];
+};
+
+#define KW_REG_CPUCS_WIN_ENABLE (1 << 0)
+#define KW_REG_CPUCS_WIN_WR_PROTECT (1 << 1)
+#define KW_REG_CPUCS_WIN_WIN0_CS(x) (((x) & 0x3) << 2)
+#define KW_REG_CPUCS_WIN_SIZE(x) (((x) & 0xff) << 24)
+
/*
* kw_sdram_bar - reads SDRAM Base Address Register
*/
u32 kw_sdram_bar(enum memory_bank bank)
{
+ struct kw_sdram_addr_dec *base =
+ (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500);
u32 result = 0;
- u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+ u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
if ((!enable) || (bank > BANK3))
return 0;
- result = readl(KW_REG_CPUCS_WIN_BAR(bank));
+ result = readl(&base->sdram_bank[bank].win_bar);
return result;
}
+/*
+ * kw_sdram_bs_set - writes SDRAM Bank size
+ */
+static void kw_sdram_bs_set(enum memory_bank bank, u32 size)
+{
+ struct kw_sdram_addr_dec *base =
+ (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500);
+ /* Read current register value */
+ u32 reg = readl(&base->sdram_bank[bank].win_sz);
+
+ /* Clear window size */
+ reg &= ~KW_REG_CPUCS_WIN_SIZE(0xFF);
+
+ /* Set new window size */
+ reg |= KW_REG_CPUCS_WIN_SIZE((size - 1) >> 24);
+
+ writel(reg, &base->sdram_bank[bank].win_sz);
+}
+
/*
* kw_sdram_bs - reads SDRAM Bank size
*/
u32 kw_sdram_bs(enum memory_bank bank)
{
+ struct kw_sdram_addr_dec *base =
+ (struct kw_sdram_addr_dec *)KW_REGISTER(0x1500);
u32 result = 0;
- u32 enable = 0x01 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+ u32 enable = 0x01 & readl(&base->sdram_bank[bank].win_sz);
if ((!enable) || (bank > BANK3))
return 0;
- result = 0xff000000 & readl(KW_REG_CPUCS_WIN_SZ(bank));
+ result = 0xff000000 & readl(&base->sdram_bank[bank].win_sz);
result += 0x01000000;
return result;
}
+void kw_sdram_size_adjust(enum memory_bank bank)
+{
+ u32 size;
+
+ /* probe currently equipped RAM size */
+ size = get_ram_size((void *)kw_sdram_bar(bank), kw_sdram_bs(bank));
+
+ /* adjust SDRAM window size accordingly */
+ kw_sdram_bs_set(bank, size);
+}
+
#ifndef CONFIG_SYS_BOARD_DRAM_INIT
int dram_init(void)
{
adr r0, _start
sub r9, r6, r0 /* r9 <- relocation offset */
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
+++ /dev/null
-PLATFORM_CPPFLAGS += -march=armv7-a
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
# Make ARMv5 to allow more compilers to work, even though its v7a.
PLATFORM_CPPFLAGS += -march=armv5
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# =========================================================================
-PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,\
- $(call cc-option,-malignment-traps,))
-PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
*/
#include <asm/arch/omap.h>
+#include <asm/arch/spl.h>
#include <linux/linkage.h>
ENTRY(save_boot_params)
strb r2, [r3, #BOOT_DEVICE_OFFSET] @ spl_boot_device <- r1
/* boot mode is passed only for devices that can raw/fat mode */
- cmp r2, #2
+ cmp r2, #BOOT_DEVICE_XIP
blt 2f
- cmp r2, #7
+ cmp r2, #BOOT_DEVICE_MMC2
bgt 2f
/* Store the boot mode (raw/FAT) in omap_bootmode */
ldr r2, [r0, #DEV_DESC_PTR_OFFSET] @ get the device descriptor ptr
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+SOBJS = lowlevel_init.o
+COBJS-y += cpu_info.o
+COBJS-y += emac.o
+
+COBJS-$(CONFIG_DISPLAY_BOARDINFO) += board.o
+COBJS-$(CONFIG_GLOBAL_TIMER) += timer.o
+COBJS-$(CONFIG_R8A7740) += cpu_info-r8a7740.o
+COBJS-$(CONFIG_R8A7740) += pfc-r8a7740.o
+COBJS-$(CONFIG_SH73A0) += cpu_info-sh73a0.o
+COBJS-$(CONFIG_SH73A0) += pfc-sh73a0.o
+COBJS_LN-$(CONFIG_TMU_TIMER) += sh_timer.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) $(addprefix $(obj),$(COBJS_LN-y:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS) $(COBJS_LN-y))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+START := $(addprefix $(obj),$(START))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+# from arch/sh/lib/ directory
+$(obj)sh_timer.c:
+ @rm -f $(obj)sh_timer.c
+ ln -s $(SRCTREE)/arch/sh/lib/time.c $(obj)sh_timer.c
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+
+int checkboard(void)
+{
+ printf("Board: %s\n", sysinfo.board_string);
+ return 0;
+}
--- /dev/null
+#
+# (C) Copyright 2002
+# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
+
+# Make ARMv5 to allow more compilers to work, even though its v7a.
+PLATFORM_CPPFLAGS += -march=armv5
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+
+u32 rmobile_get_cpu_type(void)
+{
+ u32 id;
+ u32 type;
+ struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE;
+
+ id = readl(hpb->cccr);
+ type = (id >> 8) & 0xFF;
+
+ return type;
+}
+
+u32 rmobile_get_cpu_rev(void)
+{
+ u32 id;
+ u32 rev;
+ struct r8a7740_hpb *hpb = (struct r8a7740_hpb *)HPB_BASE;
+
+ id = readl(hpb->cccr);
+ rev = (id >> 4) & 0xF;
+
+ return rev;
+}
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+
+u32 rmobile_get_cpu_type(void)
+{
+ u32 id;
+ u32 type;
+ struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+ id = readl(&hpb->cccr);
+ type = (id >> 8) & 0xFF;
+
+ return type;
+}
+
+u32 rmobile_get_cpu_rev_integer(void)
+{
+ u32 id;
+ u32 rev;
+ struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+ id = readl(&hpb->cccr);
+ rev = ((id >> 4) & 0xF) + 1;
+
+ return rev;
+}
+
+u32 rmobile_get_cpu_rev_fraction(void)
+{
+ u32 id;
+ u32 rev;
+ struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+
+ id = readl(&hpb->cccr);
+ rev = id & 0xF;
+
+ return rev;
+}
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_ARCH_CPU_INIT
+int arch_cpu_init(void)
+{
+ icache_enable();
+ return 0;
+}
+#endif
+
+#ifndef CONFIG_SYS_DCACHE_OFF
+void enable_caches(void)
+{
+ dcache_enable();
+}
+#endif
+
+#ifdef CONFIG_DISPLAY_CPUINFO
+static u32 __rmobile_get_cpu_type(void)
+{
+ return 0x0;
+}
+u32 rmobile_get_cpu_type(void)
+ __attribute__((weak, alias("__rmobile_get_cpu_type")));
+
+static u32 __rmobile_get_cpu_rev_integer(void)
+{
+ return 0;
+}
+u32 rmobile_get_cpu_rev_integer(void)
+ __attribute__((weak, alias("__rmobile_get_cpu_rev_integer")));
+
+static u32 __rmobile_get_cpu_rev_fraction(void)
+{
+ return 0;
+}
+u32 rmobile_get_cpu_rev_fraction(void)
+ __attribute__((weak, alias("__rmobile_get_cpu_rev_fraction")));
+
+int print_cpuinfo(void)
+{
+ switch (rmobile_get_cpu_type()) {
+ case 0x37:
+ printf("CPU: Renesas Electronics SH73A0 rev %d.%d\n",
+ rmobile_get_cpu_rev_integer(),
+ rmobile_get_cpu_rev_fraction());
+ break;
+ case 0x40:
+ printf("CPU: Renesas Electronics R8A7740 rev %d.%d\n",
+ rmobile_get_cpu_rev_integer(),
+ rmobile_get_cpu_rev_fraction());
+ break;
+
+ default:
+ printf("CPU: Renesas Electronics CPU rev %d.%d\n",
+ rmobile_get_cpu_rev_integer(),
+ rmobile_get_cpu_rev_fraction());
+ break;
+ }
+ return 0;
+}
+#endif /* CONFIG_DISPLAY_CPUINFO */
--- /dev/null
+/*
+ * RMOBILE EtherMAC initialization.
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#include <common.h>
+#include <asm/errno.h>
+#include <netdev.h>
+
+int cpu_eth_init(bd_t *bis)
+{
+ int ret = -ENODEV;
+#ifdef CONFIG_SH_ETHER
+ ret = sh_eth_initialize(bis);
+#endif
+ return ret;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.Iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <linux/linkage.h>
+
+ENTRY(lowlevel_init)
+ ldr r0, =MERAM_BASE
+ mov r1, #0x0
+ str r1, [r0]
+
+ mrc p15, 0, r0, c0, c0, 5
+ ands r0, r0, #0xF
+ beq lowlevel_init__
+ b wait_interrupt
+
+ .pool
+ .align 4
+
+wait_interrupt:
+#ifdef ICCICR
+ ldr r1, =ICCICR
+ mov r2, #0x0
+ str r2, [r1]
+ mov r2, #0xF0
+ adds r1, r1, #4 /* ICCPMR */
+ str r2, [r1]
+ ldr r1, =ICCICR
+ mov r2, #0x1
+ str r2, [r1]
+#endif
+
+wait_loop:
+ .long 0xE320F003 /* wfi */
+
+ ldr r2, [r1, #0xC]
+ str r2, [r1, #0x10]
+
+ ldr r0, =MERAM_BASE
+ ldr r2, [r0]
+ cmp r2, #0
+ movne pc, r2
+
+ b wait_loop
+
+wait_loop_end:
+ .pool
+ .align 4
+
+lowlevel_init__:
+
+ mov r0, #0x200000
+
+loop0:
+ subs r0, r0, #1
+ bne loop0
+
+ ldr sp, MERAM_STACK
+
+ str ip, [sp] /* stash old link register */
+ mov ip, lr /* save link reg across call */
+
+ bl s_init
+
+ ldr ip, [sp] /* restore save ip */
+ mov lr, ip /* restore link reg */
+
+ /* back to arch calling code */
+ mov pc, lr
+
+ .pool
+ .align 4
+
+ENDPROC(lowlevel_init)
+ .ltorg
+
+MERAM_STACK:
+ .word LOW_LEVEL_MERAM_STACK
--- /dev/null
+/*
+ * R8A7740 processor support
+ *
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/gpio.h>
+#include <asm/arch/irqs.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_90(fn, pfx, sfx), \
+ PORT_10(fn, pfx##10, sfx), PORT_90(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##20, sfx), \
+ PORT_1(fn, pfx##210, sfx), PORT_1(fn, pfx##211, sfx)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ /* PORT0_DATA -> PORT211_DATA */
+ PINMUX_DATA_BEGIN,
+ PORT_ALL(DATA),
+ PINMUX_DATA_END,
+
+ /* PORT0_IN -> PORT211_IN */
+ PINMUX_INPUT_BEGIN,
+ PORT_ALL(IN),
+ PINMUX_INPUT_END,
+
+ /* PORT0_IN_PU -> PORT211_IN_PU */
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_ALL(IN_PU),
+ PINMUX_INPUT_PULLUP_END,
+
+ /* PORT0_IN_PD -> PORT211_IN_PD */
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_ALL(IN_PD),
+ PINMUX_INPUT_PULLDOWN_END,
+
+ /* PORT0_OUT -> PORT211_OUT */
+ PINMUX_OUTPUT_BEGIN,
+ PORT_ALL(OUT),
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT211_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT211_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT211_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT211_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT211_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT211_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT211_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT211_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT211_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT211_FN7 */
+
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ MSEL1CR_5_0, MSEL1CR_5_1,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+
+ MSEL3CR_15_0, MSEL3CR_15_1, /* Trace / Debug ? */
+ MSEL3CR_6_0, MSEL3CR_6_1,
+
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+
+ MSEL5CR_31_0, MSEL5CR_31_1, /* irq/fiq output */
+ MSEL5CR_30_0, MSEL5CR_30_1,
+ MSEL5CR_29_0, MSEL5CR_29_1,
+ MSEL5CR_27_0, MSEL5CR_27_1,
+ MSEL5CR_25_0, MSEL5CR_25_1,
+ MSEL5CR_23_0, MSEL5CR_23_1,
+ MSEL5CR_21_0, MSEL5CR_21_1,
+ MSEL5CR_19_0, MSEL5CR_19_1,
+ MSEL5CR_17_0, MSEL5CR_17_1,
+ MSEL5CR_15_0, MSEL5CR_15_1,
+ MSEL5CR_14_0, MSEL5CR_14_1,
+ MSEL5CR_13_0, MSEL5CR_13_1,
+ MSEL5CR_12_0, MSEL5CR_12_1,
+ MSEL5CR_11_0, MSEL5CR_11_1,
+ MSEL5CR_10_0, MSEL5CR_10_1,
+ MSEL5CR_8_0, MSEL5CR_8_1,
+ MSEL5CR_7_0, MSEL5CR_7_1,
+ MSEL5CR_6_0, MSEL5CR_6_1,
+ MSEL5CR_5_0, MSEL5CR_5_1,
+ MSEL5CR_4_0, MSEL5CR_4_1,
+ MSEL5CR_3_0, MSEL5CR_3_1,
+ MSEL5CR_2_0, MSEL5CR_2_1,
+ MSEL5CR_0_0, MSEL5CR_0_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+
+ /* IRQ */
+ IRQ0_PORT2_MARK, IRQ0_PORT13_MARK,
+ IRQ1_MARK,
+ IRQ2_PORT11_MARK, IRQ2_PORT12_MARK,
+ IRQ3_PORT10_MARK, IRQ3_PORT14_MARK,
+ IRQ4_PORT15_MARK, IRQ4_PORT172_MARK,
+ IRQ5_PORT0_MARK, IRQ5_PORT1_MARK,
+ IRQ6_PORT121_MARK, IRQ6_PORT173_MARK,
+ IRQ7_PORT120_MARK, IRQ7_PORT209_MARK,
+ IRQ8_MARK,
+ IRQ9_PORT118_MARK, IRQ9_PORT210_MARK,
+ IRQ10_MARK,
+ IRQ11_MARK,
+ IRQ12_PORT42_MARK, IRQ12_PORT97_MARK,
+ IRQ13_PORT64_MARK, IRQ13_PORT98_MARK,
+ IRQ14_PORT63_MARK, IRQ14_PORT99_MARK,
+ IRQ15_PORT62_MARK, IRQ15_PORT100_MARK,
+ IRQ16_PORT68_MARK, IRQ16_PORT211_MARK,
+ IRQ17_MARK,
+ IRQ18_MARK,
+ IRQ19_MARK,
+ IRQ20_MARK,
+ IRQ21_MARK,
+ IRQ22_MARK,
+ IRQ23_MARK,
+ IRQ24_MARK,
+ IRQ25_MARK,
+ IRQ26_PORT58_MARK, IRQ26_PORT81_MARK,
+ IRQ27_PORT57_MARK, IRQ27_PORT168_MARK,
+ IRQ28_PORT56_MARK, IRQ28_PORT169_MARK,
+ IRQ29_PORT50_MARK, IRQ29_PORT170_MARK,
+ IRQ30_PORT49_MARK, IRQ30_PORT171_MARK,
+ IRQ31_PORT41_MARK, IRQ31_PORT167_MARK,
+
+ /* Function */
+
+ /* DBGT */
+ DBGMDT2_MARK, DBGMDT1_MARK, DBGMDT0_MARK,
+ DBGMD10_MARK, DBGMD11_MARK, DBGMD20_MARK,
+ DBGMD21_MARK,
+
+ /* FSI */
+ FSIAISLD_PORT0_MARK, /* FSIAISLD Port 0/5 */
+ FSIAISLD_PORT5_MARK,
+ FSIASPDIF_PORT9_MARK, /* FSIASPDIF Port 9/18 */
+ FSIASPDIF_PORT18_MARK,
+ FSIAOSLD1_MARK, FSIAOSLD2_MARK, FSIAOLR_MARK,
+ FSIAOBT_MARK, FSIAOSLD_MARK, FSIAOMC_MARK,
+ FSIACK_MARK, FSIAILR_MARK, FSIAIBT_MARK,
+
+ /* FMSI */
+ FMSISLD_PORT1_MARK, /* FMSISLD Port 1/6 */
+ FMSISLD_PORT6_MARK,
+ FMSIILR_MARK, FMSIIBT_MARK, FMSIOLR_MARK, FMSIOBT_MARK,
+ FMSICK_MARK, FMSOILR_MARK, FMSOIBT_MARK, FMSOOLR_MARK,
+ FMSOOBT_MARK, FMSOSLD_MARK, FMSOCK_MARK,
+
+ /* SCIFA0 */
+ SCIFA0_SCK_MARK, SCIFA0_CTS_MARK, SCIFA0_RTS_MARK,
+ SCIFA0_RXD_MARK, SCIFA0_TXD_MARK,
+
+ /* SCIFA1 */
+ SCIFA1_CTS_MARK, SCIFA1_SCK_MARK, SCIFA1_RXD_MARK,
+ SCIFA1_TXD_MARK, SCIFA1_RTS_MARK,
+
+ /* SCIFA2 */
+ SCIFA2_SCK_PORT22_MARK, /* SCIFA2_SCK Port 22/199 */
+ SCIFA2_SCK_PORT199_MARK,
+ SCIFA2_RXD_MARK, SCIFA2_TXD_MARK,
+ SCIFA2_CTS_MARK, SCIFA2_RTS_MARK,
+
+ /* SCIFA3 */
+ SCIFA3_RTS_PORT105_MARK, /* MSEL5CR_8_0 */
+ SCIFA3_SCK_PORT116_MARK,
+ SCIFA3_CTS_PORT117_MARK,
+ SCIFA3_RXD_PORT174_MARK,
+ SCIFA3_TXD_PORT175_MARK,
+
+ SCIFA3_RTS_PORT161_MARK, /* MSEL5CR_8_1 */
+ SCIFA3_SCK_PORT158_MARK,
+ SCIFA3_CTS_PORT162_MARK,
+ SCIFA3_RXD_PORT159_MARK,
+ SCIFA3_TXD_PORT160_MARK,
+
+ /* SCIFA4 */
+ SCIFA4_RXD_PORT12_MARK, /* MSEL5CR[12:11] = 00 */
+ SCIFA4_TXD_PORT13_MARK,
+
+ SCIFA4_RXD_PORT204_MARK, /* MSEL5CR[12:11] = 01 */
+ SCIFA4_TXD_PORT203_MARK,
+
+ SCIFA4_RXD_PORT94_MARK, /* MSEL5CR[12:11] = 10 */
+ SCIFA4_TXD_PORT93_MARK,
+
+ SCIFA4_SCK_PORT21_MARK, /* SCIFA4_SCK Port 21/205 */
+ SCIFA4_SCK_PORT205_MARK,
+
+ /* SCIFA5 */
+ SCIFA5_TXD_PORT20_MARK, /* MSEL5CR[15:14] = 00 */
+ SCIFA5_RXD_PORT10_MARK,
+
+ SCIFA5_RXD_PORT207_MARK, /* MSEL5CR[15:14] = 01 */
+ SCIFA5_TXD_PORT208_MARK,
+
+ SCIFA5_TXD_PORT91_MARK, /* MSEL5CR[15:14] = 10 */
+ SCIFA5_RXD_PORT92_MARK,
+
+ SCIFA5_SCK_PORT23_MARK, /* SCIFA5_SCK Port 23/206 */
+ SCIFA5_SCK_PORT206_MARK,
+
+ /* SCIFA6 */
+ SCIFA6_SCK_MARK, SCIFA6_RXD_MARK, SCIFA6_TXD_MARK,
+
+ /* SCIFA7 */
+ SCIFA7_TXD_MARK, SCIFA7_RXD_MARK,
+
+ /* SCIFAB */
+ SCIFB_SCK_PORT190_MARK, /* MSEL5CR_17_0 */
+ SCIFB_RXD_PORT191_MARK,
+ SCIFB_TXD_PORT192_MARK,
+ SCIFB_RTS_PORT186_MARK,
+ SCIFB_CTS_PORT187_MARK,
+
+ SCIFB_SCK_PORT2_MARK, /* MSEL5CR_17_1 */
+ SCIFB_RXD_PORT3_MARK,
+ SCIFB_TXD_PORT4_MARK,
+ SCIFB_RTS_PORT172_MARK,
+ SCIFB_CTS_PORT173_MARK,
+
+ /* LCD0 */
+ LCDC0_SELECT_MARK,
+
+ LCD0_D0_MARK, LCD0_D1_MARK, LCD0_D2_MARK, LCD0_D3_MARK,
+ LCD0_D4_MARK, LCD0_D5_MARK, LCD0_D6_MARK, LCD0_D7_MARK,
+ LCD0_D8_MARK, LCD0_D9_MARK, LCD0_D10_MARK, LCD0_D11_MARK,
+ LCD0_D12_MARK, LCD0_D13_MARK, LCD0_D14_MARK, LCD0_D15_MARK,
+ LCD0_D16_MARK, LCD0_D17_MARK,
+ LCD0_DON_MARK, LCD0_VCPWC_MARK, LCD0_VEPWC_MARK,
+ LCD0_DCK_MARK, LCD0_VSYN_MARK, /* for RGB */
+ LCD0_HSYN_MARK, LCD0_DISP_MARK, /* for RGB */
+ LCD0_WR_MARK, LCD0_RD_MARK, /* for SYS */
+ LCD0_CS_MARK, LCD0_RS_MARK, /* for SYS */
+
+ LCD0_D21_PORT158_MARK, LCD0_D23_PORT159_MARK, /* MSEL5CR_6_1 */
+ LCD0_D22_PORT160_MARK, LCD0_D20_PORT161_MARK,
+ LCD0_D19_PORT162_MARK, LCD0_D18_PORT163_MARK,
+ LCD0_LCLK_PORT165_MARK,
+
+ LCD0_D18_PORT40_MARK, LCD0_D22_PORT0_MARK, /* MSEL5CR_6_0 */
+ LCD0_D23_PORT1_MARK, LCD0_D21_PORT2_MARK,
+ LCD0_D20_PORT3_MARK, LCD0_D19_PORT4_MARK,
+ LCD0_LCLK_PORT102_MARK,
+
+ /* LCD1 */
+ LCDC1_SELECT_MARK,
+
+ LCD1_D0_MARK, LCD1_D1_MARK, LCD1_D2_MARK, LCD1_D3_MARK,
+ LCD1_D4_MARK, LCD1_D5_MARK, LCD1_D6_MARK, LCD1_D7_MARK,
+ LCD1_D8_MARK, LCD1_D9_MARK, LCD1_D10_MARK, LCD1_D11_MARK,
+ LCD1_D12_MARK, LCD1_D13_MARK, LCD1_D14_MARK, LCD1_D15_MARK,
+ LCD1_D16_MARK, LCD1_D17_MARK, LCD1_D18_MARK, LCD1_D19_MARK,
+ LCD1_D20_MARK, LCD1_D21_MARK, LCD1_D22_MARK, LCD1_D23_MARK,
+ LCD1_DON_MARK, LCD1_VCPWC_MARK,
+ LCD1_LCLK_MARK, LCD1_VEPWC_MARK,
+
+ LCD1_DCK_MARK, LCD1_VSYN_MARK, /* for RGB */
+ LCD1_HSYN_MARK, LCD1_DISP_MARK, /* for RGB */
+ LCD1_RS_MARK, LCD1_CS_MARK, /* for SYS */
+ LCD1_RD_MARK, LCD1_WR_MARK, /* for SYS */
+
+ /* RSPI */
+ RSPI_SSL0_A_MARK, RSPI_SSL1_A_MARK, RSPI_SSL2_A_MARK,
+ RSPI_SSL3_A_MARK, RSPI_CK_A_MARK, RSPI_MOSI_A_MARK,
+ RSPI_MISO_A_MARK,
+
+ /* VIO CKO */
+ VIO_CKO1_MARK, /* needs fixup */
+ VIO_CKO2_MARK,
+ VIO_CKO_1_MARK,
+ VIO_CKO_MARK,
+
+ /* VIO0 */
+ VIO0_D0_MARK, VIO0_D1_MARK, VIO0_D2_MARK, VIO0_D3_MARK,
+ VIO0_D4_MARK, VIO0_D5_MARK, VIO0_D6_MARK, VIO0_D7_MARK,
+ VIO0_D8_MARK, VIO0_D9_MARK, VIO0_D10_MARK, VIO0_D11_MARK,
+ VIO0_D12_MARK, VIO0_VD_MARK, VIO0_HD_MARK, VIO0_CLK_MARK,
+ VIO0_FIELD_MARK,
+
+ VIO0_D13_PORT26_MARK, /* MSEL5CR_27_0 */
+ VIO0_D14_PORT25_MARK,
+ VIO0_D15_PORT24_MARK,
+
+ VIO0_D13_PORT22_MARK, /* MSEL5CR_27_1 */
+ VIO0_D14_PORT95_MARK,
+ VIO0_D15_PORT96_MARK,
+
+ /* VIO1 */
+ VIO1_D0_MARK, VIO1_D1_MARK, VIO1_D2_MARK, VIO1_D3_MARK,
+ VIO1_D4_MARK, VIO1_D5_MARK, VIO1_D6_MARK, VIO1_D7_MARK,
+ VIO1_VD_MARK, VIO1_HD_MARK, VIO1_CLK_MARK, VIO1_FIELD_MARK,
+
+ /* TPU0 */
+ TPU0TO0_MARK, TPU0TO1_MARK, TPU0TO3_MARK,
+ TPU0TO2_PORT66_MARK, /* TPU0TO2 Port 66/202 */
+ TPU0TO2_PORT202_MARK,
+
+ /* SSP1 0 */
+ STP0_IPD0_MARK, STP0_IPD1_MARK, STP0_IPD2_MARK, STP0_IPD3_MARK,
+ STP0_IPD4_MARK, STP0_IPD5_MARK, STP0_IPD6_MARK, STP0_IPD7_MARK,
+ STP0_IPEN_MARK, STP0_IPCLK_MARK, STP0_IPSYNC_MARK,
+
+ /* SSP1 1 */
+ STP1_IPD1_MARK, STP1_IPD2_MARK, STP1_IPD3_MARK, STP1_IPD4_MARK,
+ STP1_IPD5_MARK, STP1_IPD6_MARK, STP1_IPD7_MARK, STP1_IPCLK_MARK,
+ STP1_IPSYNC_MARK,
+
+ STP1_IPD0_PORT186_MARK, /* MSEL5CR_23_0 */
+ STP1_IPEN_PORT187_MARK,
+
+ STP1_IPD0_PORT194_MARK, /* MSEL5CR_23_1 */
+ STP1_IPEN_PORT193_MARK,
+
+ /* SIM */
+ SIM_RST_MARK, SIM_CLK_MARK,
+ SIM_D_PORT22_MARK, /* SIM_D Port 22/199 */
+ SIM_D_PORT199_MARK,
+
+ /* SDHI0 */
+ SDHI0_D0_MARK, SDHI0_D1_MARK, SDHI0_D2_MARK, SDHI0_D3_MARK,
+ SDHI0_CD_MARK, SDHI0_WP_MARK, SDHI0_CMD_MARK, SDHI0_CLK_MARK,
+
+ /* SDHI1 */
+ SDHI1_D0_MARK, SDHI1_D1_MARK, SDHI1_D2_MARK, SDHI1_D3_MARK,
+ SDHI1_CD_MARK, SDHI1_WP_MARK, SDHI1_CMD_MARK, SDHI1_CLK_MARK,
+
+ /* SDHI2 */
+ SDHI2_D0_MARK, SDHI2_D1_MARK, SDHI2_D2_MARK, SDHI2_D3_MARK,
+ SDHI2_CLK_MARK, SDHI2_CMD_MARK,
+
+ SDHI2_CD_PORT24_MARK, /* MSEL5CR_19_0 */
+ SDHI2_WP_PORT25_MARK,
+
+ SDHI2_WP_PORT177_MARK, /* MSEL5CR_19_1 */
+ SDHI2_CD_PORT202_MARK,
+
+ /* MSIOF2 */
+ MSIOF2_TXD_MARK, MSIOF2_RXD_MARK, MSIOF2_TSCK_MARK,
+ MSIOF2_SS2_MARK, MSIOF2_TSYNC_MARK, MSIOF2_SS1_MARK,
+ MSIOF2_MCK1_MARK, MSIOF2_MCK0_MARK, MSIOF2_RSYNC_MARK,
+ MSIOF2_RSCK_MARK,
+
+ /* KEYSC */
+ KEYIN4_MARK, KEYIN5_MARK, KEYIN6_MARK, KEYIN7_MARK,
+ KEYOUT0_MARK, KEYOUT1_MARK, KEYOUT2_MARK, KEYOUT3_MARK,
+ KEYOUT4_MARK, KEYOUT5_MARK, KEYOUT6_MARK, KEYOUT7_MARK,
+
+ KEYIN0_PORT43_MARK, /* MSEL4CR_18_0 */
+ KEYIN1_PORT44_MARK,
+ KEYIN2_PORT45_MARK,
+ KEYIN3_PORT46_MARK,
+
+ KEYIN0_PORT58_MARK, /* MSEL4CR_18_1 */
+ KEYIN1_PORT57_MARK,
+ KEYIN2_PORT56_MARK,
+ KEYIN3_PORT55_MARK,
+
+ /* VOU */
+ DV_D0_MARK, DV_D1_MARK, DV_D2_MARK, DV_D3_MARK,
+ DV_D4_MARK, DV_D5_MARK, DV_D6_MARK, DV_D7_MARK,
+ DV_D8_MARK, DV_D9_MARK, DV_D10_MARK, DV_D11_MARK,
+ DV_D12_MARK, DV_D13_MARK, DV_D14_MARK, DV_D15_MARK,
+ DV_CLK_MARK, DV_VSYNC_MARK, DV_HSYNC_MARK,
+
+ /* MEMC */
+ MEMC_AD0_MARK, MEMC_AD1_MARK, MEMC_AD2_MARK, MEMC_AD3_MARK,
+ MEMC_AD4_MARK, MEMC_AD5_MARK, MEMC_AD6_MARK, MEMC_AD7_MARK,
+ MEMC_AD8_MARK, MEMC_AD9_MARK, MEMC_AD10_MARK, MEMC_AD11_MARK,
+ MEMC_AD12_MARK, MEMC_AD13_MARK, MEMC_AD14_MARK, MEMC_AD15_MARK,
+ MEMC_CS0_MARK, MEMC_INT_MARK, MEMC_NWE_MARK, MEMC_NOE_MARK,
+
+ MEMC_CS1_MARK, /* MSEL4CR_6_0 */
+ MEMC_ADV_MARK,
+ MEMC_WAIT_MARK,
+ MEMC_BUSCLK_MARK,
+
+ MEMC_A1_MARK, /* MSEL4CR_6_1 */
+ MEMC_DREQ0_MARK,
+ MEMC_DREQ1_MARK,
+ MEMC_A0_MARK,
+
+ /* MMC */
+ MMC0_D0_PORT68_MARK, MMC0_D1_PORT69_MARK, MMC0_D2_PORT70_MARK,
+ MMC0_D3_PORT71_MARK, MMC0_D4_PORT72_MARK, MMC0_D5_PORT73_MARK,
+ MMC0_D6_PORT74_MARK, MMC0_D7_PORT75_MARK, MMC0_CLK_PORT66_MARK,
+ MMC0_CMD_PORT67_MARK, /* MSEL4CR_15_0 */
+
+ MMC1_D0_PORT149_MARK, MMC1_D1_PORT148_MARK, MMC1_D2_PORT147_MARK,
+ MMC1_D3_PORT146_MARK, MMC1_D4_PORT145_MARK, MMC1_D5_PORT144_MARK,
+ MMC1_D6_PORT143_MARK, MMC1_D7_PORT142_MARK, MMC1_CLK_PORT103_MARK,
+ MMC1_CMD_PORT104_MARK, /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ MSIOF0_SS1_MARK, MSIOF0_SS2_MARK, MSIOF0_RXD_MARK,
+ MSIOF0_TXD_MARK, MSIOF0_MCK0_MARK, MSIOF0_MCK1_MARK,
+ MSIOF0_RSYNC_MARK, MSIOF0_RSCK_MARK, MSIOF0_TSCK_MARK,
+ MSIOF0_TSYNC_MARK,
+
+ /* MSIOF1 */
+ MSIOF1_RSCK_MARK, MSIOF1_RSYNC_MARK,
+ MSIOF1_MCK0_MARK, MSIOF1_MCK1_MARK,
+
+ MSIOF1_SS2_PORT116_MARK, MSIOF1_SS1_PORT117_MARK,
+ MSIOF1_RXD_PORT118_MARK, MSIOF1_TXD_PORT119_MARK,
+ MSIOF1_TSYNC_PORT120_MARK,
+ MSIOF1_TSCK_PORT121_MARK, /* MSEL4CR_10_0 */
+
+ MSIOF1_SS1_PORT67_MARK, MSIOF1_TSCK_PORT72_MARK,
+ MSIOF1_TSYNC_PORT73_MARK, MSIOF1_TXD_PORT74_MARK,
+ MSIOF1_RXD_PORT75_MARK,
+ MSIOF1_SS2_PORT202_MARK, /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPO0_MARK, GPI0_MARK, GPO1_MARK, GPI1_MARK,
+
+ /* USB0 */
+ USB0_OCI_MARK, USB0_PPON_MARK, VBUS_MARK,
+
+ /* USB1 */
+ USB1_OCI_MARK, USB1_PPON_MARK,
+
+ /* BBIF1 */
+ BBIF1_RXD_MARK, BBIF1_TXD_MARK, BBIF1_TSYNC_MARK,
+ BBIF1_TSCK_MARK, BBIF1_RSCK_MARK, BBIF1_RSYNC_MARK,
+ BBIF1_FLOW_MARK, BBIF1_RX_FLOW_N_MARK,
+
+ /* BBIF2 */
+ BBIF2_TXD2_PORT5_MARK, /* MSEL5CR_0_0 */
+ BBIF2_RXD2_PORT60_MARK,
+ BBIF2_TSYNC2_PORT6_MARK,
+ BBIF2_TSCK2_PORT59_MARK,
+
+ BBIF2_RXD2_PORT90_MARK, /* MSEL5CR_0_1 */
+ BBIF2_TXD2_PORT183_MARK,
+ BBIF2_TSCK2_PORT89_MARK,
+ BBIF2_TSYNC2_PORT184_MARK,
+
+ /* BSC / FLCTL / PCMCIA */
+ CS0_MARK, CS2_MARK, CS4_MARK,
+ CS5B_MARK, CS6A_MARK,
+ CS5A_PORT105_MARK, /* CS5A PORT 19/105 */
+ CS5A_PORT19_MARK,
+ IOIS16_MARK, /* ? */
+
+ A0_MARK, A1_MARK, A2_MARK, A3_MARK,
+ A4_FOE_MARK, /* share with FLCTL */
+ A5_FCDE_MARK, /* share with FLCTL */
+ A6_MARK, A7_MARK, A8_MARK, A9_MARK,
+ A10_MARK, A11_MARK, A12_MARK, A13_MARK,
+ A14_MARK, A15_MARK, A16_MARK, A17_MARK,
+ A18_MARK, A19_MARK, A20_MARK, A21_MARK,
+ A22_MARK, A23_MARK, A24_MARK, A25_MARK,
+ A26_MARK,
+
+ D0_NAF0_MARK, D1_NAF1_MARK, D2_NAF2_MARK, /* share with FLCTL */
+ D3_NAF3_MARK, D4_NAF4_MARK, D5_NAF5_MARK, /* share with FLCTL */
+ D6_NAF6_MARK, D7_NAF7_MARK, D8_NAF8_MARK, /* share with FLCTL */
+ D9_NAF9_MARK, D10_NAF10_MARK, D11_NAF11_MARK, /* share with FLCTL */
+ D12_NAF12_MARK, D13_NAF13_MARK, D14_NAF14_MARK, /* share with FLCTL */
+ D15_NAF15_MARK, /* share with FLCTL */
+ D16_MARK, D17_MARK, D18_MARK, D19_MARK,
+ D20_MARK, D21_MARK, D22_MARK, D23_MARK,
+ D24_MARK, D25_MARK, D26_MARK, D27_MARK,
+ D28_MARK, D29_MARK, D30_MARK, D31_MARK,
+
+ WE0_FWE_MARK, /* share with FLCTL */
+ WE1_MARK,
+ WE2_ICIORD_MARK, /* share with PCMCIA */
+ WE3_ICIOWR_MARK, /* share with PCMCIA */
+ CKO_MARK, BS_MARK, RDWR_MARK,
+ RD_FSC_MARK, /* share with FLCTL */
+ WAIT_PORT177_MARK, /* WAIT Port 90/177 */
+ WAIT_PORT90_MARK,
+
+ FCE0_MARK, FCE1_MARK, FRB_MARK, /* FLCTL */
+
+ /* IRDA */
+ IRDA_FIRSEL_MARK, IRDA_IN_MARK, IRDA_OUT_MARK,
+
+ /* ATAPI */
+ IDE_D0_MARK, IDE_D1_MARK, IDE_D2_MARK, IDE_D3_MARK,
+ IDE_D4_MARK, IDE_D5_MARK, IDE_D6_MARK, IDE_D7_MARK,
+ IDE_D8_MARK, IDE_D9_MARK, IDE_D10_MARK, IDE_D11_MARK,
+ IDE_D12_MARK, IDE_D13_MARK, IDE_D14_MARK, IDE_D15_MARK,
+ IDE_A0_MARK, IDE_A1_MARK, IDE_A2_MARK, IDE_CS0_MARK,
+ IDE_CS1_MARK, IDE_IOWR_MARK, IDE_IORD_MARK, IDE_IORDY_MARK,
+ IDE_INT_MARK, IDE_RST_MARK, IDE_DIRECTION_MARK,
+ IDE_EXBUF_ENB_MARK, IDE_IODACK_MARK, IDE_IODREQ_MARK,
+
+ /* RMII */
+ RMII_CRS_DV_MARK, RMII_RX_ER_MARK, RMII_RXD0_MARK,
+ RMII_RXD1_MARK, RMII_TX_EN_MARK, RMII_TXD0_MARK,
+ RMII_MDC_MARK, RMII_TXD1_MARK, RMII_MDIO_MARK,
+ RMII_REF50CK_MARK, /* for RMII */
+ RMII_REF125CK_MARK, /* for GMII */
+
+ /* GEther */
+ ET_TX_CLK_MARK, ET_TX_EN_MARK, ET_ETXD0_MARK, ET_ETXD1_MARK,
+ ET_ETXD2_MARK, ET_ETXD3_MARK,
+ ET_ETXD4_MARK, ET_ETXD5_MARK, /* for GEther */
+ ET_ETXD6_MARK, ET_ETXD7_MARK, /* for GEther */
+ ET_COL_MARK, ET_TX_ER_MARK, ET_RX_CLK_MARK, ET_RX_DV_MARK,
+ ET_ERXD0_MARK, ET_ERXD1_MARK, ET_ERXD2_MARK, ET_ERXD3_MARK,
+ ET_ERXD4_MARK, ET_ERXD5_MARK, /* for GEther */
+ ET_ERXD6_MARK, ET_ERXD7_MARK, /* for GEther */
+ ET_RX_ER_MARK, ET_CRS_MARK, ET_MDC_MARK, ET_MDIO_MARK,
+ ET_LINK_MARK, ET_PHY_INT_MARK, ET_WOL_MARK, ET_GTX_CLK_MARK,
+
+ /* DMA0 */
+ DREQ0_MARK, DACK0_MARK,
+
+ /* DMA1 */
+ DREQ1_MARK, DACK1_MARK,
+
+ /* SYSC */
+ RESETOUTS_MARK, RESETP_PULLUP_MARK, RESETP_PLAIN_MARK,
+
+ /* IRREM */
+ IROUT_MARK,
+
+ /* SDENC */
+ SDENC_CPG_MARK, SDENC_DV_CLKI_MARK,
+
+ /* DEBUG */
+ EDEBGREQ_PULLUP_MARK, /* for JTAG */
+ EDEBGREQ_PULLDOWN_MARK,
+
+ TRACEAUD_FROM_VIO_MARK, /* for TRACE/AUD */
+ TRACEAUD_FROM_LCDC0_MARK,
+ TRACEAUD_FROM_MEMC_MARK,
+
+ PINMUX_MARK_END,
+};
+
+static unsigned short pinmux_data[] = {
+ /* specify valid pin states for each pin in GPIO mode */
+
+ /* I/O and Pull U/D */
+ PORT_DATA_IO_PD(0), PORT_DATA_IO_PD(1),
+ PORT_DATA_IO_PD(2), PORT_DATA_IO_PD(3),
+ PORT_DATA_IO_PD(4), PORT_DATA_IO_PD(5),
+ PORT_DATA_IO_PD(6), PORT_DATA_IO(7),
+ PORT_DATA_IO(8), PORT_DATA_IO(9),
+
+ PORT_DATA_IO_PD(10), PORT_DATA_IO_PD(11),
+ PORT_DATA_IO_PD(12), PORT_DATA_IO_PU_PD(13),
+ PORT_DATA_IO_PD(14), PORT_DATA_IO_PD(15),
+ PORT_DATA_IO_PD(16), PORT_DATA_IO_PD(17),
+ PORT_DATA_IO(18), PORT_DATA_IO_PU(19),
+
+ PORT_DATA_IO_PU_PD(20), PORT_DATA_IO_PD(21),
+ PORT_DATA_IO_PU_PD(22), PORT_DATA_IO(23),
+ PORT_DATA_IO_PU(24), PORT_DATA_IO_PU(25),
+ PORT_DATA_IO_PU(26), PORT_DATA_IO_PU(27),
+ PORT_DATA_IO_PU(28), PORT_DATA_IO_PU(29),
+
+ PORT_DATA_IO_PU(30), PORT_DATA_IO_PD(31),
+ PORT_DATA_IO_PD(32), PORT_DATA_IO_PD(33),
+ PORT_DATA_IO_PD(34), PORT_DATA_IO_PU(35),
+ PORT_DATA_IO_PU(36), PORT_DATA_IO_PD(37),
+ PORT_DATA_IO_PU(38), PORT_DATA_IO_PD(39),
+
+ PORT_DATA_IO_PU_PD(40), PORT_DATA_IO_PD(41),
+ PORT_DATA_IO_PD(42), PORT_DATA_IO_PU_PD(43),
+ PORT_DATA_IO_PU_PD(44), PORT_DATA_IO_PU_PD(45),
+ PORT_DATA_IO_PU_PD(46), PORT_DATA_IO_PU_PD(47),
+ PORT_DATA_IO_PU_PD(48), PORT_DATA_IO_PU_PD(49),
+
+ PORT_DATA_IO_PU_PD(50), PORT_DATA_IO_PD(51),
+ PORT_DATA_IO_PD(52), PORT_DATA_IO_PD(53),
+ PORT_DATA_IO_PD(54), PORT_DATA_IO_PU_PD(55),
+ PORT_DATA_IO_PU_PD(56), PORT_DATA_IO_PU_PD(57),
+ PORT_DATA_IO_PU_PD(58), PORT_DATA_IO_PU_PD(59),
+
+ PORT_DATA_IO_PU_PD(60), PORT_DATA_IO_PD(61),
+ PORT_DATA_IO_PD(62), PORT_DATA_IO_PD(63),
+ PORT_DATA_IO_PD(64), PORT_DATA_IO_PD(65),
+ PORT_DATA_IO_PU_PD(66), PORT_DATA_IO_PU_PD(67),
+ PORT_DATA_IO_PU_PD(68), PORT_DATA_IO_PU_PD(69),
+
+ PORT_DATA_IO_PU_PD(70), PORT_DATA_IO_PU_PD(71),
+ PORT_DATA_IO_PU_PD(72), PORT_DATA_IO_PU_PD(73),
+ PORT_DATA_IO_PU_PD(74), PORT_DATA_IO_PU_PD(75),
+ PORT_DATA_IO_PU_PD(76), PORT_DATA_IO_PU_PD(77),
+ PORT_DATA_IO_PU_PD(78), PORT_DATA_IO_PU_PD(79),
+
+ PORT_DATA_IO_PU_PD(80), PORT_DATA_IO_PU_PD(81),
+ PORT_DATA_IO(82), PORT_DATA_IO_PU_PD(83),
+ PORT_DATA_IO(84), PORT_DATA_IO_PD(85),
+ PORT_DATA_IO_PD(86), PORT_DATA_IO_PD(87),
+ PORT_DATA_IO_PD(88), PORT_DATA_IO_PD(89),
+
+ PORT_DATA_IO_PD(90), PORT_DATA_IO_PU_PD(91),
+ PORT_DATA_IO_PU_PD(92), PORT_DATA_IO_PU_PD(93),
+ PORT_DATA_IO_PU_PD(94), PORT_DATA_IO_PU_PD(95),
+ PORT_DATA_IO_PU_PD(96), PORT_DATA_IO_PU_PD(97),
+ PORT_DATA_IO_PU_PD(98), PORT_DATA_IO_PU_PD(99),
+
+ PORT_DATA_IO_PU_PD(100), PORT_DATA_IO(101),
+ PORT_DATA_IO_PU(102), PORT_DATA_IO_PU_PD(103),
+ PORT_DATA_IO_PU(104), PORT_DATA_IO_PU(105),
+ PORT_DATA_IO_PU_PD(106), PORT_DATA_IO(107),
+ PORT_DATA_IO(108), PORT_DATA_IO(109),
+
+ PORT_DATA_IO(110), PORT_DATA_IO(111),
+ PORT_DATA_IO(112), PORT_DATA_IO(113),
+ PORT_DATA_IO_PU_PD(114), PORT_DATA_IO(115),
+ PORT_DATA_IO_PD(116), PORT_DATA_IO_PD(117),
+ PORT_DATA_IO_PD(118), PORT_DATA_IO_PD(119),
+
+ PORT_DATA_IO_PD(120), PORT_DATA_IO_PD(121),
+ PORT_DATA_IO_PD(122), PORT_DATA_IO_PD(123),
+ PORT_DATA_IO_PD(124), PORT_DATA_IO(125),
+ PORT_DATA_IO(126), PORT_DATA_IO(127),
+ PORT_DATA_IO(128), PORT_DATA_IO(129),
+
+ PORT_DATA_IO(130), PORT_DATA_IO(131),
+ PORT_DATA_IO(132), PORT_DATA_IO(133),
+ PORT_DATA_IO(134), PORT_DATA_IO(135),
+ PORT_DATA_IO(136), PORT_DATA_IO(137),
+ PORT_DATA_IO(138), PORT_DATA_IO(139),
+
+ PORT_DATA_IO(140), PORT_DATA_IO(141),
+ PORT_DATA_IO_PU(142), PORT_DATA_IO_PU(143),
+ PORT_DATA_IO_PU(144), PORT_DATA_IO_PU(145),
+ PORT_DATA_IO_PU(146), PORT_DATA_IO_PU(147),
+ PORT_DATA_IO_PU(148), PORT_DATA_IO_PU(149),
+
+ PORT_DATA_IO_PU(150), PORT_DATA_IO_PU(151),
+ PORT_DATA_IO_PU(152), PORT_DATA_IO_PU(153),
+ PORT_DATA_IO_PU(154), PORT_DATA_IO_PU(155),
+ PORT_DATA_IO_PU(156), PORT_DATA_IO_PU(157),
+ PORT_DATA_IO_PD(158), PORT_DATA_IO_PD(159),
+
+ PORT_DATA_IO_PU_PD(160), PORT_DATA_IO_PD(161),
+ PORT_DATA_IO_PD(162), PORT_DATA_IO_PD(163),
+ PORT_DATA_IO_PD(164), PORT_DATA_IO_PD(165),
+ PORT_DATA_IO_PU(166), PORT_DATA_IO_PU(167),
+ PORT_DATA_IO_PU(168), PORT_DATA_IO_PU(169),
+
+ PORT_DATA_IO_PU(170), PORT_DATA_IO_PU(171),
+ PORT_DATA_IO_PD(172), PORT_DATA_IO_PD(173),
+ PORT_DATA_IO_PD(174), PORT_DATA_IO_PD(175),
+ PORT_DATA_IO_PU(176), PORT_DATA_IO_PU_PD(177),
+ PORT_DATA_IO_PU(178), PORT_DATA_IO_PD(179),
+
+ PORT_DATA_IO_PD(180), PORT_DATA_IO_PU(181),
+ PORT_DATA_IO_PU(182), PORT_DATA_IO(183),
+ PORT_DATA_IO_PD(184), PORT_DATA_IO_PD(185),
+ PORT_DATA_IO_PD(186), PORT_DATA_IO_PD(187),
+ PORT_DATA_IO_PD(188), PORT_DATA_IO_PD(189),
+
+ PORT_DATA_IO_PD(190), PORT_DATA_IO_PD(191),
+ PORT_DATA_IO_PD(192), PORT_DATA_IO_PU_PD(193),
+ PORT_DATA_IO_PU_PD(194), PORT_DATA_IO_PD(195),
+ PORT_DATA_IO_PU_PD(196), PORT_DATA_IO_PD(197),
+ PORT_DATA_IO_PU_PD(198), PORT_DATA_IO_PU_PD(199),
+
+ PORT_DATA_IO_PU_PD(200), PORT_DATA_IO_PU(201),
+ PORT_DATA_IO_PU_PD(202), PORT_DATA_IO(203),
+ PORT_DATA_IO_PU_PD(204), PORT_DATA_IO_PU_PD(205),
+ PORT_DATA_IO_PU_PD(206), PORT_DATA_IO_PU_PD(207),
+ PORT_DATA_IO_PU_PD(208), PORT_DATA_IO_PD(209),
+
+ PORT_DATA_IO_PD(210), PORT_DATA_IO_PD(211),
+
+ /* Port0 */
+ PINMUX_DATA(DBGMDT2_MARK, PORT0_FN1),
+ PINMUX_DATA(FSIAISLD_PORT0_MARK, PORT0_FN2, MSEL5CR_3_0),
+ PINMUX_DATA(FSIAOSLD1_MARK, PORT0_FN3),
+ PINMUX_DATA(LCD0_D22_PORT0_MARK, PORT0_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(SCIFA7_RXD_MARK, PORT0_FN6),
+ PINMUX_DATA(LCD1_D4_MARK, PORT0_FN7),
+ PINMUX_DATA(IRQ5_PORT0_MARK, PORT0_FN0, MSEL1CR_5_0),
+
+ /* Port1 */
+ PINMUX_DATA(DBGMDT1_MARK, PORT1_FN1),
+ PINMUX_DATA(FMSISLD_PORT1_MARK, PORT1_FN2, MSEL5CR_5_0),
+ PINMUX_DATA(FSIAOSLD2_MARK, PORT1_FN3),
+ PINMUX_DATA(LCD0_D23_PORT1_MARK, PORT1_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(SCIFA7_TXD_MARK, PORT1_FN6),
+ PINMUX_DATA(LCD1_D3_MARK, PORT1_FN7),
+ PINMUX_DATA(IRQ5_PORT1_MARK, PORT1_FN0, MSEL1CR_5_1),
+
+ /* Port2 */
+ PINMUX_DATA(DBGMDT0_MARK, PORT2_FN1),
+ PINMUX_DATA(SCIFB_SCK_PORT2_MARK, PORT2_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D21_PORT2_MARK, PORT2_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D2_MARK, PORT2_FN7),
+ PINMUX_DATA(IRQ0_PORT2_MARK, PORT2_FN0, MSEL1CR_0_1),
+
+ /* Port3 */
+ PINMUX_DATA(DBGMD21_MARK, PORT3_FN1),
+ PINMUX_DATA(SCIFB_RXD_PORT3_MARK, PORT3_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D20_PORT3_MARK, PORT3_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D1_MARK, PORT3_FN7),
+
+ /* Port4 */
+ PINMUX_DATA(DBGMD20_MARK, PORT4_FN1),
+ PINMUX_DATA(SCIFB_TXD_PORT4_MARK, PORT4_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(LCD0_D19_PORT4_MARK, PORT4_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(LCD1_D0_MARK, PORT4_FN7),
+
+ /* Port5 */
+ PINMUX_DATA(DBGMD11_MARK, PORT5_FN1),
+ PINMUX_DATA(BBIF2_TXD2_PORT5_MARK, PORT5_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(FSIAISLD_PORT5_MARK, PORT5_FN4, MSEL5CR_3_1),
+ PINMUX_DATA(RSPI_SSL0_A_MARK, PORT5_FN6),
+ PINMUX_DATA(LCD1_VCPWC_MARK, PORT5_FN7),
+
+ /* Port6 */
+ PINMUX_DATA(DBGMD10_MARK, PORT6_FN1),
+ PINMUX_DATA(BBIF2_TSYNC2_PORT6_MARK, PORT6_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(FMSISLD_PORT6_MARK, PORT6_FN4, MSEL5CR_5_1),
+ PINMUX_DATA(RSPI_SSL1_A_MARK, PORT6_FN6),
+ PINMUX_DATA(LCD1_VEPWC_MARK, PORT6_FN7),
+
+ /* Port7 */
+ PINMUX_DATA(FSIAOLR_MARK, PORT7_FN1),
+
+ /* Port8 */
+ PINMUX_DATA(FSIAOBT_MARK, PORT8_FN1),
+
+ /* Port9 */
+ PINMUX_DATA(FSIAOSLD_MARK, PORT9_FN1),
+ PINMUX_DATA(FSIASPDIF_PORT9_MARK, PORT9_FN2, MSEL5CR_4_0),
+
+ /* Port10 */
+ PINMUX_DATA(FSIAOMC_MARK, PORT10_FN1),
+ PINMUX_DATA(SCIFA5_RXD_PORT10_MARK, PORT10_FN3, MSEL5CR_14_0,
+ MSEL5CR_15_0),
+ PINMUX_DATA(IRQ3_PORT10_MARK, PORT10_FN0, MSEL1CR_3_0),
+
+ /* Port11 */
+ PINMUX_DATA(FSIACK_MARK, PORT11_FN1),
+ PINMUX_DATA(IRQ2_PORT11_MARK, PORT11_FN0, MSEL1CR_2_0),
+
+ /* Port12 */
+ PINMUX_DATA(FSIAILR_MARK, PORT12_FN1),
+ PINMUX_DATA(SCIFA4_RXD_PORT12_MARK, PORT12_FN2, MSEL5CR_12_0,
+ MSEL5CR_11_0),
+ PINMUX_DATA(LCD1_RS_MARK, PORT12_FN6),
+ PINMUX_DATA(LCD1_DISP_MARK, PORT12_FN7),
+ PINMUX_DATA(IRQ2_PORT12_MARK, PORT12_FN0, MSEL1CR_2_1),
+
+ /* Port13 */
+ PINMUX_DATA(FSIAIBT_MARK, PORT13_FN1),
+ PINMUX_DATA(SCIFA4_TXD_PORT13_MARK, PORT13_FN2, MSEL5CR_12_0,
+ MSEL5CR_11_0),
+ PINMUX_DATA(LCD1_RD_MARK, PORT13_FN7),
+ PINMUX_DATA(IRQ0_PORT13_MARK, PORT13_FN0, MSEL1CR_0_0),
+
+ /* Port14 */
+ PINMUX_DATA(FMSOILR_MARK, PORT14_FN1),
+ PINMUX_DATA(FMSIILR_MARK, PORT14_FN2),
+ PINMUX_DATA(VIO_CKO1_MARK, PORT14_FN3),
+ PINMUX_DATA(LCD1_D23_MARK, PORT14_FN7),
+ PINMUX_DATA(IRQ3_PORT14_MARK, PORT14_FN0, MSEL1CR_3_1),
+
+ /* Port15 */
+ PINMUX_DATA(FMSOIBT_MARK, PORT15_FN1),
+ PINMUX_DATA(FMSIIBT_MARK, PORT15_FN2),
+ PINMUX_DATA(VIO_CKO2_MARK, PORT15_FN3),
+ PINMUX_DATA(LCD1_D22_MARK, PORT15_FN7),
+ PINMUX_DATA(IRQ4_PORT15_MARK, PORT15_FN0, MSEL1CR_4_0),
+
+ /* Port16 */
+ PINMUX_DATA(FMSOOLR_MARK, PORT16_FN1),
+ PINMUX_DATA(FMSIOLR_MARK, PORT16_FN2),
+
+ /* Port17 */
+ PINMUX_DATA(FMSOOBT_MARK, PORT17_FN1),
+ PINMUX_DATA(FMSIOBT_MARK, PORT17_FN2),
+
+ /* Port18 */
+ PINMUX_DATA(FMSOSLD_MARK, PORT18_FN1),
+ PINMUX_DATA(FSIASPDIF_PORT18_MARK, PORT18_FN2, MSEL5CR_4_1),
+
+ /* Port19 */
+ PINMUX_DATA(FMSICK_MARK, PORT19_FN1),
+ PINMUX_DATA(CS5A_PORT19_MARK, PORT19_FN7, MSEL5CR_2_1),
+ PINMUX_DATA(IRQ10_MARK, PORT19_FN0),
+
+ /* Port20 */
+ PINMUX_DATA(FMSOCK_MARK, PORT20_FN1),
+ PINMUX_DATA(SCIFA5_TXD_PORT20_MARK, PORT20_FN3, MSEL5CR_15_0,
+ MSEL5CR_14_0),
+ PINMUX_DATA(IRQ1_MARK, PORT20_FN0),
+
+ /* Port21 */
+ PINMUX_DATA(SCIFA1_CTS_MARK, PORT21_FN1),
+ PINMUX_DATA(SCIFA4_SCK_PORT21_MARK, PORT21_FN2, MSEL5CR_10_0),
+ PINMUX_DATA(TPU0TO1_MARK, PORT21_FN4),
+ PINMUX_DATA(VIO1_FIELD_MARK, PORT21_FN5),
+ PINMUX_DATA(STP0_IPD5_MARK, PORT21_FN6),
+ PINMUX_DATA(LCD1_D10_MARK, PORT21_FN7),
+
+ /* Port22 */
+ PINMUX_DATA(SCIFA2_SCK_PORT22_MARK, PORT22_FN1, MSEL5CR_7_0),
+ PINMUX_DATA(SIM_D_PORT22_MARK, PORT22_FN4, MSEL5CR_21_0),
+ PINMUX_DATA(VIO0_D13_PORT22_MARK, PORT22_FN7, MSEL5CR_27_1),
+
+ /* Port23 */
+ PINMUX_DATA(SCIFA1_RTS_MARK, PORT23_FN1),
+ PINMUX_DATA(SCIFA5_SCK_PORT23_MARK, PORT23_FN3, MSEL5CR_13_0),
+ PINMUX_DATA(TPU0TO0_MARK, PORT23_FN4),
+ PINMUX_DATA(VIO_CKO_1_MARK, PORT23_FN5),
+ PINMUX_DATA(STP0_IPD2_MARK, PORT23_FN6),
+ PINMUX_DATA(LCD1_D7_MARK, PORT23_FN7),
+
+ /* Port24 */
+ PINMUX_DATA(VIO0_D15_PORT24_MARK, PORT24_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D7_MARK, PORT24_FN5),
+ PINMUX_DATA(SCIFA6_SCK_MARK, PORT24_FN6),
+ PINMUX_DATA(SDHI2_CD_PORT24_MARK, PORT24_FN7, MSEL5CR_19_0),
+
+ /* Port25 */
+ PINMUX_DATA(VIO0_D14_PORT25_MARK, PORT25_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D6_MARK, PORT25_FN5),
+ PINMUX_DATA(SCIFA6_RXD_MARK, PORT25_FN6),
+ PINMUX_DATA(SDHI2_WP_PORT25_MARK, PORT25_FN7, MSEL5CR_19_0),
+
+ /* Port26 */
+ PINMUX_DATA(VIO0_D13_PORT26_MARK, PORT26_FN1, MSEL5CR_27_0),
+ PINMUX_DATA(VIO1_D5_MARK, PORT26_FN5),
+ PINMUX_DATA(SCIFA6_TXD_MARK, PORT26_FN6),
+
+ /* Port27 - Port39 Function */
+ PINMUX_DATA(VIO0_D7_MARK, PORT27_FN1),
+ PINMUX_DATA(VIO0_D6_MARK, PORT28_FN1),
+ PINMUX_DATA(VIO0_D5_MARK, PORT29_FN1),
+ PINMUX_DATA(VIO0_D4_MARK, PORT30_FN1),
+ PINMUX_DATA(VIO0_D3_MARK, PORT31_FN1),
+ PINMUX_DATA(VIO0_D2_MARK, PORT32_FN1),
+ PINMUX_DATA(VIO0_D1_MARK, PORT33_FN1),
+ PINMUX_DATA(VIO0_D0_MARK, PORT34_FN1),
+ PINMUX_DATA(VIO0_CLK_MARK, PORT35_FN1),
+ PINMUX_DATA(VIO_CKO_MARK, PORT36_FN1),
+ PINMUX_DATA(VIO0_HD_MARK, PORT37_FN1),
+ PINMUX_DATA(VIO0_FIELD_MARK, PORT38_FN1),
+ PINMUX_DATA(VIO0_VD_MARK, PORT39_FN1),
+
+ /* Port38 IRQ */
+ PINMUX_DATA(IRQ25_MARK, PORT38_FN0),
+
+ /* Port40 */
+ PINMUX_DATA(LCD0_D18_PORT40_MARK, PORT40_FN4, MSEL5CR_6_0),
+ PINMUX_DATA(RSPI_CK_A_MARK, PORT40_FN6),
+ PINMUX_DATA(LCD1_LCLK_MARK, PORT40_FN7),
+
+ /* Port41 */
+ PINMUX_DATA(LCD0_D17_MARK, PORT41_FN1),
+ PINMUX_DATA(MSIOF2_SS1_MARK, PORT41_FN2),
+ PINMUX_DATA(IRQ31_PORT41_MARK, PORT41_FN0, MSEL1CR_31_1),
+
+ /* Port42 */
+ PINMUX_DATA(LCD0_D16_MARK, PORT42_FN1),
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT42_FN2),
+ PINMUX_DATA(IRQ12_PORT42_MARK, PORT42_FN0, MSEL1CR_12_1),
+
+ /* Port43 */
+ PINMUX_DATA(LCD0_D15_MARK, PORT43_FN1),
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT43_FN2),
+ PINMUX_DATA(KEYIN0_PORT43_MARK, PORT43_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D15_MARK, PORT43_FN6),
+
+ /* Port44 */
+ PINMUX_DATA(LCD0_D14_MARK, PORT44_FN1),
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT44_FN2),
+ PINMUX_DATA(KEYIN1_PORT44_MARK, PORT44_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D14_MARK, PORT44_FN6),
+
+ /* Port45 */
+ PINMUX_DATA(LCD0_D13_MARK, PORT45_FN1),
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT45_FN2),
+ PINMUX_DATA(KEYIN2_PORT45_MARK, PORT45_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D13_MARK, PORT45_FN6),
+
+ /* Port46 */
+ PINMUX_DATA(LCD0_D12_MARK, PORT46_FN1),
+ PINMUX_DATA(KEYIN3_PORT46_MARK, PORT46_FN3, MSEL4CR_18_0),
+ PINMUX_DATA(DV_D12_MARK, PORT46_FN6),
+
+ /* Port47 */
+ PINMUX_DATA(LCD0_D11_MARK, PORT47_FN1),
+ PINMUX_DATA(KEYIN4_MARK, PORT47_FN3),
+ PINMUX_DATA(DV_D11_MARK, PORT47_FN6),
+
+ /* Port48 */
+ PINMUX_DATA(LCD0_D10_MARK, PORT48_FN1),
+ PINMUX_DATA(KEYIN5_MARK, PORT48_FN3),
+ PINMUX_DATA(DV_D10_MARK, PORT48_FN6),
+
+ /* Port49 */
+ PINMUX_DATA(LCD0_D9_MARK, PORT49_FN1),
+ PINMUX_DATA(KEYIN6_MARK, PORT49_FN3),
+ PINMUX_DATA(DV_D9_MARK, PORT49_FN6),
+ PINMUX_DATA(IRQ30_PORT49_MARK, PORT49_FN0, MSEL1CR_30_1),
+
+ /* Port50 */
+ PINMUX_DATA(LCD0_D8_MARK, PORT50_FN1),
+ PINMUX_DATA(KEYIN7_MARK, PORT50_FN3),
+ PINMUX_DATA(DV_D8_MARK, PORT50_FN6),
+ PINMUX_DATA(IRQ29_PORT50_MARK, PORT50_FN0, MSEL1CR_29_1),
+
+ /* Port51 */
+ PINMUX_DATA(LCD0_D7_MARK, PORT51_FN1),
+ PINMUX_DATA(KEYOUT0_MARK, PORT51_FN3),
+ PINMUX_DATA(DV_D7_MARK, PORT51_FN6),
+
+ /* Port52 */
+ PINMUX_DATA(LCD0_D6_MARK, PORT52_FN1),
+ PINMUX_DATA(KEYOUT1_MARK, PORT52_FN3),
+ PINMUX_DATA(DV_D6_MARK, PORT52_FN6),
+
+ /* Port53 */
+ PINMUX_DATA(LCD0_D5_MARK, PORT53_FN1),
+ PINMUX_DATA(KEYOUT2_MARK, PORT53_FN3),
+ PINMUX_DATA(DV_D5_MARK, PORT53_FN6),
+
+ /* Port54 */
+ PINMUX_DATA(LCD0_D4_MARK, PORT54_FN1),
+ PINMUX_DATA(KEYOUT3_MARK, PORT54_FN3),
+ PINMUX_DATA(DV_D4_MARK, PORT54_FN6),
+
+ /* Port55 */
+ PINMUX_DATA(LCD0_D3_MARK, PORT55_FN1),
+ PINMUX_DATA(KEYOUT4_MARK, PORT55_FN3),
+ PINMUX_DATA(KEYIN3_PORT55_MARK, PORT55_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D3_MARK, PORT55_FN6),
+
+ /* Port56 */
+ PINMUX_DATA(LCD0_D2_MARK, PORT56_FN1),
+ PINMUX_DATA(KEYOUT5_MARK, PORT56_FN3),
+ PINMUX_DATA(KEYIN2_PORT56_MARK, PORT56_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D2_MARK, PORT56_FN6),
+ PINMUX_DATA(IRQ28_PORT56_MARK, PORT56_FN0, MSEL1CR_28_1),
+
+ /* Port57 */
+ PINMUX_DATA(LCD0_D1_MARK, PORT57_FN1),
+ PINMUX_DATA(KEYOUT6_MARK, PORT57_FN3),
+ PINMUX_DATA(KEYIN1_PORT57_MARK, PORT57_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D1_MARK, PORT57_FN6),
+ PINMUX_DATA(IRQ27_PORT57_MARK, PORT57_FN0, MSEL1CR_27_1),
+
+ /* Port58 */
+ PINMUX_DATA(LCD0_D0_MARK, PORT58_FN1),
+ PINMUX_DATA(KEYOUT7_MARK, PORT58_FN3),
+ PINMUX_DATA(KEYIN0_PORT58_MARK, PORT58_FN4, MSEL4CR_18_1),
+ PINMUX_DATA(DV_D0_MARK, PORT58_FN6),
+ PINMUX_DATA(IRQ26_PORT58_MARK, PORT58_FN0, MSEL1CR_26_1),
+
+ /* Port59 */
+ PINMUX_DATA(LCD0_VCPWC_MARK, PORT59_FN1),
+ PINMUX_DATA(BBIF2_TSCK2_PORT59_MARK, PORT59_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(RSPI_MOSI_A_MARK, PORT59_FN6),
+
+ /* Port60 */
+ PINMUX_DATA(LCD0_VEPWC_MARK, PORT60_FN1),
+ PINMUX_DATA(BBIF2_RXD2_PORT60_MARK, PORT60_FN2, MSEL5CR_0_0),
+ PINMUX_DATA(RSPI_MISO_A_MARK, PORT60_FN6),
+
+ /* Port61 */
+ PINMUX_DATA(LCD0_DON_MARK, PORT61_FN1),
+ PINMUX_DATA(MSIOF2_TXD_MARK, PORT61_FN2),
+
+ /* Port62 */
+ PINMUX_DATA(LCD0_DCK_MARK, PORT62_FN1),
+ PINMUX_DATA(LCD0_WR_MARK, PORT62_FN4),
+ PINMUX_DATA(DV_CLK_MARK, PORT62_FN6),
+ PINMUX_DATA(IRQ15_PORT62_MARK, PORT62_FN0, MSEL1CR_15_1),
+
+ /* Port63 */
+ PINMUX_DATA(LCD0_VSYN_MARK, PORT63_FN1),
+ PINMUX_DATA(DV_VSYNC_MARK, PORT63_FN6),
+ PINMUX_DATA(IRQ14_PORT63_MARK, PORT63_FN0, MSEL1CR_14_1),
+
+ /* Port64 */
+ PINMUX_DATA(LCD0_HSYN_MARK, PORT64_FN1),
+ PINMUX_DATA(LCD0_CS_MARK, PORT64_FN4),
+ PINMUX_DATA(DV_HSYNC_MARK, PORT64_FN6),
+ PINMUX_DATA(IRQ13_PORT64_MARK, PORT64_FN0, MSEL1CR_13_1),
+
+ /* Port65 */
+ PINMUX_DATA(LCD0_DISP_MARK, PORT65_FN1),
+ PINMUX_DATA(MSIOF2_TSCK_MARK, PORT65_FN2),
+ PINMUX_DATA(LCD0_RS_MARK, PORT65_FN4),
+
+ /* Port66 */
+ PINMUX_DATA(MEMC_INT_MARK, PORT66_FN1),
+ PINMUX_DATA(TPU0TO2_PORT66_MARK, PORT66_FN3, MSEL5CR_25_0),
+ PINMUX_DATA(MMC0_CLK_PORT66_MARK, PORT66_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(SDHI1_CLK_MARK, PORT66_FN6),
+
+ /* Port67 - Port73 Function1 */
+ PINMUX_DATA(MEMC_CS0_MARK, PORT67_FN1),
+ PINMUX_DATA(MEMC_AD8_MARK, PORT68_FN1),
+ PINMUX_DATA(MEMC_AD9_MARK, PORT69_FN1),
+ PINMUX_DATA(MEMC_AD10_MARK, PORT70_FN1),
+ PINMUX_DATA(MEMC_AD11_MARK, PORT71_FN1),
+ PINMUX_DATA(MEMC_AD12_MARK, PORT72_FN1),
+ PINMUX_DATA(MEMC_AD13_MARK, PORT73_FN1),
+
+ /* Port67 - Port73 Function2 */
+ PINMUX_DATA(MSIOF1_SS1_PORT67_MARK, PORT67_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT68_FN2),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT69_FN2),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT70_FN2),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT71_FN2),
+ PINMUX_DATA(MSIOF1_TSCK_PORT72_MARK, PORT72_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MSIOF1_TSYNC_PORT73_MARK, PORT73_FN2, MSEL4CR_10_1),
+
+ /* Port67 - Port73 Function4 */
+ PINMUX_DATA(MMC0_CMD_PORT67_MARK, PORT67_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D0_PORT68_MARK, PORT68_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D1_PORT69_MARK, PORT69_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D2_PORT70_MARK, PORT70_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D3_PORT71_MARK, PORT71_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D4_PORT72_MARK, PORT72_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(MMC0_D5_PORT73_MARK, PORT73_FN4, MSEL4CR_15_0),
+
+ /* Port67 - Port73 Function6 */
+ PINMUX_DATA(SDHI1_CMD_MARK, PORT67_FN6),
+ PINMUX_DATA(SDHI1_D0_MARK, PORT68_FN6),
+ PINMUX_DATA(SDHI1_D1_MARK, PORT69_FN6),
+ PINMUX_DATA(SDHI1_D2_MARK, PORT70_FN6),
+ PINMUX_DATA(SDHI1_D3_MARK, PORT71_FN6),
+ PINMUX_DATA(SDHI1_CD_MARK, PORT72_FN6),
+ PINMUX_DATA(SDHI1_WP_MARK, PORT73_FN6),
+
+ /* Port67 - Port71 IRQ */
+ PINMUX_DATA(IRQ20_MARK, PORT67_FN0),
+ PINMUX_DATA(IRQ16_PORT68_MARK, PORT68_FN0, MSEL1CR_16_0),
+ PINMUX_DATA(IRQ17_MARK, PORT69_FN0),
+ PINMUX_DATA(IRQ18_MARK, PORT70_FN0),
+ PINMUX_DATA(IRQ19_MARK, PORT71_FN0),
+
+ /* Port74 */
+ PINMUX_DATA(MEMC_AD14_MARK, PORT74_FN1),
+ PINMUX_DATA(MSIOF1_TXD_PORT74_MARK, PORT74_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MMC0_D6_PORT74_MARK, PORT74_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(STP1_IPD7_MARK, PORT74_FN6),
+ PINMUX_DATA(LCD1_D21_MARK, PORT74_FN7),
+
+ /* Port75 */
+ PINMUX_DATA(MEMC_AD15_MARK, PORT75_FN1),
+ PINMUX_DATA(MSIOF1_RXD_PORT75_MARK, PORT75_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(MMC0_D7_PORT75_MARK, PORT75_FN4, MSEL4CR_15_0),
+ PINMUX_DATA(STP1_IPD6_MARK, PORT75_FN6),
+ PINMUX_DATA(LCD1_D20_MARK, PORT75_FN7),
+
+ /* Port76 - Port80 Function */
+ PINMUX_DATA(SDHI0_CMD_MARK, PORT76_FN1),
+ PINMUX_DATA(SDHI0_D0_MARK, PORT77_FN1),
+ PINMUX_DATA(SDHI0_D1_MARK, PORT78_FN1),
+ PINMUX_DATA(SDHI0_D2_MARK, PORT79_FN1),
+ PINMUX_DATA(SDHI0_D3_MARK, PORT80_FN1),
+
+ /* Port81 */
+ PINMUX_DATA(SDHI0_CD_MARK, PORT81_FN1),
+ PINMUX_DATA(IRQ26_PORT81_MARK, PORT81_FN0, MSEL1CR_26_0),
+
+ /* Port82 - Port88 Function */
+ PINMUX_DATA(SDHI0_CLK_MARK, PORT82_FN1),
+ PINMUX_DATA(SDHI0_WP_MARK, PORT83_FN1),
+ PINMUX_DATA(RESETOUTS_MARK, PORT84_FN1),
+ PINMUX_DATA(USB0_PPON_MARK, PORT85_FN1),
+ PINMUX_DATA(USB0_OCI_MARK, PORT86_FN1),
+ PINMUX_DATA(USB1_PPON_MARK, PORT87_FN1),
+ PINMUX_DATA(USB1_OCI_MARK, PORT88_FN1),
+
+ /* Port89 */
+ PINMUX_DATA(DREQ0_MARK, PORT89_FN1),
+ PINMUX_DATA(BBIF2_TSCK2_PORT89_MARK, PORT89_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(RSPI_SSL3_A_MARK, PORT89_FN6),
+
+ /* Port90 */
+ PINMUX_DATA(DACK0_MARK, PORT90_FN1),
+ PINMUX_DATA(BBIF2_RXD2_PORT90_MARK, PORT90_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(RSPI_SSL2_A_MARK, PORT90_FN6),
+ PINMUX_DATA(WAIT_PORT90_MARK, PORT90_FN7, MSEL5CR_2_1),
+
+ /* Port91 */
+ PINMUX_DATA(MEMC_AD0_MARK, PORT91_FN1),
+ PINMUX_DATA(BBIF1_RXD_MARK, PORT91_FN2),
+ PINMUX_DATA(SCIFA5_TXD_PORT91_MARK, PORT91_FN3, MSEL5CR_15_1,
+ MSEL5CR_14_0),
+ PINMUX_DATA(LCD1_D5_MARK, PORT91_FN7),
+
+ /* Port92 */
+ PINMUX_DATA(MEMC_AD1_MARK, PORT92_FN1),
+ PINMUX_DATA(BBIF1_TSYNC_MARK, PORT92_FN2),
+ PINMUX_DATA(SCIFA5_RXD_PORT92_MARK, PORT92_FN3, MSEL5CR_15_1,
+ MSEL5CR_14_0),
+ PINMUX_DATA(STP0_IPD1_MARK, PORT92_FN6),
+ PINMUX_DATA(LCD1_D6_MARK, PORT92_FN7),
+
+ /* Port93 */
+ PINMUX_DATA(MEMC_AD2_MARK, PORT93_FN1),
+ PINMUX_DATA(BBIF1_TSCK_MARK, PORT93_FN2),
+ PINMUX_DATA(SCIFA4_TXD_PORT93_MARK, PORT93_FN3, MSEL5CR_12_1,
+ MSEL5CR_11_0),
+ PINMUX_DATA(STP0_IPD3_MARK, PORT93_FN6),
+ PINMUX_DATA(LCD1_D8_MARK, PORT93_FN7),
+
+ /* Port94 */
+ PINMUX_DATA(MEMC_AD3_MARK, PORT94_FN1),
+ PINMUX_DATA(BBIF1_TXD_MARK, PORT94_FN2),
+ PINMUX_DATA(SCIFA4_RXD_PORT94_MARK, PORT94_FN3, MSEL5CR_12_1,
+ MSEL5CR_11_0),
+ PINMUX_DATA(STP0_IPD4_MARK, PORT94_FN6),
+ PINMUX_DATA(LCD1_D9_MARK, PORT94_FN7),
+
+ /* Port95 */
+ PINMUX_DATA(MEMC_CS1_MARK, PORT95_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_A1_MARK, PORT95_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_CTS_MARK, PORT95_FN2),
+ PINMUX_DATA(SIM_RST_MARK, PORT95_FN4),
+ PINMUX_DATA(VIO0_D14_PORT95_MARK, PORT95_FN7, MSEL5CR_27_1),
+ PINMUX_DATA(IRQ22_MARK, PORT95_FN0),
+
+ /* Port96 */
+ PINMUX_DATA(MEMC_ADV_MARK, PORT96_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_DREQ0_MARK, PORT96_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_RTS_MARK, PORT96_FN2),
+ PINMUX_DATA(SIM_CLK_MARK, PORT96_FN4),
+ PINMUX_DATA(VIO0_D15_PORT96_MARK, PORT96_FN7, MSEL5CR_27_1),
+ PINMUX_DATA(IRQ23_MARK, PORT96_FN0),
+
+ /* Port97 */
+ PINMUX_DATA(MEMC_AD4_MARK, PORT97_FN1),
+ PINMUX_DATA(BBIF1_RSCK_MARK, PORT97_FN2),
+ PINMUX_DATA(LCD1_CS_MARK, PORT97_FN6),
+ PINMUX_DATA(LCD1_HSYN_MARK, PORT97_FN7),
+ PINMUX_DATA(IRQ12_PORT97_MARK, PORT97_FN0, MSEL1CR_12_0),
+
+ /* Port98 */
+ PINMUX_DATA(MEMC_AD5_MARK, PORT98_FN1),
+ PINMUX_DATA(BBIF1_RSYNC_MARK, PORT98_FN2),
+ PINMUX_DATA(LCD1_VSYN_MARK, PORT98_FN7),
+ PINMUX_DATA(IRQ13_PORT98_MARK, PORT98_FN0, MSEL1CR_13_0),
+
+ /* Port99 */
+ PINMUX_DATA(MEMC_AD6_MARK, PORT99_FN1),
+ PINMUX_DATA(BBIF1_FLOW_MARK, PORT99_FN2),
+ PINMUX_DATA(LCD1_WR_MARK, PORT99_FN6),
+ PINMUX_DATA(LCD1_DCK_MARK, PORT99_FN7),
+ PINMUX_DATA(IRQ14_PORT99_MARK, PORT99_FN0, MSEL1CR_14_0),
+
+ /* Port100 */
+ PINMUX_DATA(MEMC_AD7_MARK, PORT100_FN1),
+ PINMUX_DATA(BBIF1_RX_FLOW_N_MARK, PORT100_FN2),
+ PINMUX_DATA(LCD1_DON_MARK, PORT100_FN7),
+ PINMUX_DATA(IRQ15_PORT100_MARK, PORT100_FN0, MSEL1CR_15_0),
+
+ /* Port101 */
+ PINMUX_DATA(FCE0_MARK, PORT101_FN1),
+
+ /* Port102 */
+ PINMUX_DATA(FRB_MARK, PORT102_FN1),
+ PINMUX_DATA(LCD0_LCLK_PORT102_MARK, PORT102_FN4, MSEL5CR_6_0),
+
+ /* Port103 */
+ PINMUX_DATA(CS5B_MARK, PORT103_FN1),
+ PINMUX_DATA(FCE1_MARK, PORT103_FN2),
+ PINMUX_DATA(MMC1_CLK_PORT103_MARK, PORT103_FN3, MSEL4CR_15_1),
+
+ /* Port104 */
+ PINMUX_DATA(CS6A_MARK, PORT104_FN1),
+ PINMUX_DATA(MMC1_CMD_PORT104_MARK, PORT104_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(IRQ11_MARK, PORT104_FN0),
+
+ /* Port105 */
+ PINMUX_DATA(CS5A_PORT105_MARK, PORT105_FN1, MSEL5CR_2_0),
+ PINMUX_DATA(SCIFA3_RTS_PORT105_MARK, PORT105_FN4, MSEL5CR_8_0),
+
+ /* Port106 */
+ PINMUX_DATA(IOIS16_MARK, PORT106_FN1),
+ PINMUX_DATA(IDE_EXBUF_ENB_MARK, PORT106_FN6),
+
+ /* Port107 - Port115 Function */
+ PINMUX_DATA(WE3_ICIOWR_MARK, PORT107_FN1),
+ PINMUX_DATA(WE2_ICIORD_MARK, PORT108_FN1),
+ PINMUX_DATA(CS0_MARK, PORT109_FN1),
+ PINMUX_DATA(CS2_MARK, PORT110_FN1),
+ PINMUX_DATA(CS4_MARK, PORT111_FN1),
+ PINMUX_DATA(WE1_MARK, PORT112_FN1),
+ PINMUX_DATA(WE0_FWE_MARK, PORT113_FN1),
+ PINMUX_DATA(RDWR_MARK, PORT114_FN1),
+ PINMUX_DATA(RD_FSC_MARK, PORT115_FN1),
+
+ /* Port116 */
+ PINMUX_DATA(A25_MARK, PORT116_FN1),
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT116_FN2),
+ PINMUX_DATA(MSIOF1_SS2_PORT116_MARK, PORT116_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(SCIFA3_SCK_PORT116_MARK, PORT116_FN4, MSEL5CR_8_0),
+ PINMUX_DATA(GPO1_MARK, PORT116_FN5),
+
+ /* Port117 */
+ PINMUX_DATA(A24_MARK, PORT117_FN1),
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT117_FN2),
+ PINMUX_DATA(MSIOF1_SS1_PORT117_MARK, PORT117_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(SCIFA3_CTS_PORT117_MARK, PORT117_FN4, MSEL5CR_8_0),
+ PINMUX_DATA(GPO0_MARK, PORT117_FN5),
+
+ /* Port118 */
+ PINMUX_DATA(A23_MARK, PORT118_FN1),
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT118_FN2),
+ PINMUX_DATA(MSIOF1_RXD_PORT118_MARK, PORT118_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(GPI1_MARK, PORT118_FN5),
+ PINMUX_DATA(IRQ9_PORT118_MARK, PORT118_FN0, MSEL1CR_9_0),
+
+ /* Port119 */
+ PINMUX_DATA(A22_MARK, PORT119_FN1),
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT119_FN2),
+ PINMUX_DATA(MSIOF1_TXD_PORT119_MARK, PORT119_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(GPI0_MARK, PORT119_FN5),
+ PINMUX_DATA(IRQ8_MARK, PORT119_FN0),
+
+ /* Port120 */
+ PINMUX_DATA(A21_MARK, PORT120_FN1),
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT120_FN2),
+ PINMUX_DATA(MSIOF1_TSYNC_PORT120_MARK, PORT120_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(IRQ7_PORT120_MARK, PORT120_FN0, MSEL1CR_7_0),
+
+ /* Port121 */
+ PINMUX_DATA(A20_MARK, PORT121_FN1),
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT121_FN2),
+ PINMUX_DATA(MSIOF1_TSCK_PORT121_MARK, PORT121_FN3, MSEL4CR_10_0),
+ PINMUX_DATA(IRQ6_PORT121_MARK, PORT121_FN0, MSEL1CR_6_0),
+
+ /* Port122 */
+ PINMUX_DATA(A19_MARK, PORT122_FN1),
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT122_FN2),
+
+ /* Port123 */
+ PINMUX_DATA(A18_MARK, PORT123_FN1),
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT123_FN2),
+
+ /* Port124 */
+ PINMUX_DATA(A17_MARK, PORT124_FN1),
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT124_FN2),
+
+ /* Port125 - Port141 Function */
+ PINMUX_DATA(A16_MARK, PORT125_FN1),
+ PINMUX_DATA(A15_MARK, PORT126_FN1),
+ PINMUX_DATA(A14_MARK, PORT127_FN1),
+ PINMUX_DATA(A13_MARK, PORT128_FN1),
+ PINMUX_DATA(A12_MARK, PORT129_FN1),
+ PINMUX_DATA(A11_MARK, PORT130_FN1),
+ PINMUX_DATA(A10_MARK, PORT131_FN1),
+ PINMUX_DATA(A9_MARK, PORT132_FN1),
+ PINMUX_DATA(A8_MARK, PORT133_FN1),
+ PINMUX_DATA(A7_MARK, PORT134_FN1),
+ PINMUX_DATA(A6_MARK, PORT135_FN1),
+ PINMUX_DATA(A5_FCDE_MARK, PORT136_FN1),
+ PINMUX_DATA(A4_FOE_MARK, PORT137_FN1),
+ PINMUX_DATA(A3_MARK, PORT138_FN1),
+ PINMUX_DATA(A2_MARK, PORT139_FN1),
+ PINMUX_DATA(A1_MARK, PORT140_FN1),
+ PINMUX_DATA(CKO_MARK, PORT141_FN1),
+
+ /* Port142 - Port157 Function1 */
+ PINMUX_DATA(D15_NAF15_MARK, PORT142_FN1),
+ PINMUX_DATA(D14_NAF14_MARK, PORT143_FN1),
+ PINMUX_DATA(D13_NAF13_MARK, PORT144_FN1),
+ PINMUX_DATA(D12_NAF12_MARK, PORT145_FN1),
+ PINMUX_DATA(D11_NAF11_MARK, PORT146_FN1),
+ PINMUX_DATA(D10_NAF10_MARK, PORT147_FN1),
+ PINMUX_DATA(D9_NAF9_MARK, PORT148_FN1),
+ PINMUX_DATA(D8_NAF8_MARK, PORT149_FN1),
+ PINMUX_DATA(D7_NAF7_MARK, PORT150_FN1),
+ PINMUX_DATA(D6_NAF6_MARK, PORT151_FN1),
+ PINMUX_DATA(D5_NAF5_MARK, PORT152_FN1),
+ PINMUX_DATA(D4_NAF4_MARK, PORT153_FN1),
+ PINMUX_DATA(D3_NAF3_MARK, PORT154_FN1),
+ PINMUX_DATA(D2_NAF2_MARK, PORT155_FN1),
+ PINMUX_DATA(D1_NAF1_MARK, PORT156_FN1),
+ PINMUX_DATA(D0_NAF0_MARK, PORT157_FN1),
+
+ /* Port142 - Port149 Function3 */
+ PINMUX_DATA(MMC1_D7_PORT142_MARK, PORT142_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D6_PORT143_MARK, PORT143_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D5_PORT144_MARK, PORT144_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D4_PORT145_MARK, PORT145_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D3_PORT146_MARK, PORT146_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D2_PORT147_MARK, PORT147_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D1_PORT148_MARK, PORT148_FN3, MSEL4CR_15_1),
+ PINMUX_DATA(MMC1_D0_PORT149_MARK, PORT149_FN3, MSEL4CR_15_1),
+
+ /* Port158 */
+ PINMUX_DATA(D31_MARK, PORT158_FN1),
+ PINMUX_DATA(SCIFA3_SCK_PORT158_MARK, PORT158_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(RMII_REF125CK_MARK, PORT158_FN3),
+ PINMUX_DATA(LCD0_D21_PORT158_MARK, PORT158_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_FIRSEL_MARK, PORT158_FN5),
+ PINMUX_DATA(IDE_D15_MARK, PORT158_FN6),
+
+ /* Port159 */
+ PINMUX_DATA(D30_MARK, PORT159_FN1),
+ PINMUX_DATA(SCIFA3_RXD_PORT159_MARK, PORT159_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(RMII_REF50CK_MARK, PORT159_FN3),
+ PINMUX_DATA(LCD0_D23_PORT159_MARK, PORT159_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IDE_D14_MARK, PORT159_FN6),
+
+ /* Port160 */
+ PINMUX_DATA(D29_MARK, PORT160_FN1),
+ PINMUX_DATA(SCIFA3_TXD_PORT160_MARK, PORT160_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(LCD0_D22_PORT160_MARK, PORT160_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(VIO1_HD_MARK, PORT160_FN5),
+ PINMUX_DATA(IDE_D13_MARK, PORT160_FN6),
+
+ /* Port161 */
+ PINMUX_DATA(D28_MARK, PORT161_FN1),
+ PINMUX_DATA(SCIFA3_RTS_PORT161_MARK, PORT161_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(ET_RX_DV_MARK, PORT161_FN3),
+ PINMUX_DATA(LCD0_D20_PORT161_MARK, PORT161_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_IN_MARK, PORT161_FN5),
+ PINMUX_DATA(IDE_D12_MARK, PORT161_FN6),
+
+ /* Port162 */
+ PINMUX_DATA(D27_MARK, PORT162_FN1),
+ PINMUX_DATA(SCIFA3_CTS_PORT162_MARK, PORT162_FN2, MSEL5CR_8_1),
+ PINMUX_DATA(LCD0_D19_PORT162_MARK, PORT162_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IRDA_OUT_MARK, PORT162_FN5),
+ PINMUX_DATA(IDE_D11_MARK, PORT162_FN6),
+
+ /* Port163 */
+ PINMUX_DATA(D26_MARK, PORT163_FN1),
+ PINMUX_DATA(MSIOF2_SS2_MARK, PORT163_FN2),
+ PINMUX_DATA(ET_COL_MARK, PORT163_FN3),
+ PINMUX_DATA(LCD0_D18_PORT163_MARK, PORT163_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IROUT_MARK, PORT163_FN5),
+ PINMUX_DATA(IDE_D10_MARK, PORT163_FN6),
+
+ /* Port164 */
+ PINMUX_DATA(D25_MARK, PORT164_FN1),
+ PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT164_FN2),
+ PINMUX_DATA(ET_PHY_INT_MARK, PORT164_FN3),
+ PINMUX_DATA(LCD0_RD_MARK, PORT164_FN4),
+ PINMUX_DATA(IDE_D9_MARK, PORT164_FN6),
+
+ /* Port165 */
+ PINMUX_DATA(D24_MARK, PORT165_FN1),
+ PINMUX_DATA(MSIOF2_RXD_MARK, PORT165_FN2),
+ PINMUX_DATA(LCD0_LCLK_PORT165_MARK, PORT165_FN4, MSEL5CR_6_1),
+ PINMUX_DATA(IDE_D8_MARK, PORT165_FN6),
+
+ /* Port166 - Port171 Function1 */
+ PINMUX_DATA(D21_MARK, PORT166_FN1),
+ PINMUX_DATA(D20_MARK, PORT167_FN1),
+ PINMUX_DATA(D19_MARK, PORT168_FN1),
+ PINMUX_DATA(D18_MARK, PORT169_FN1),
+ PINMUX_DATA(D17_MARK, PORT170_FN1),
+ PINMUX_DATA(D16_MARK, PORT171_FN1),
+
+ /* Port166 - Port171 Function3 */
+ PINMUX_DATA(ET_ETXD5_MARK, PORT166_FN3),
+ PINMUX_DATA(ET_ETXD4_MARK, PORT167_FN3),
+ PINMUX_DATA(ET_ETXD3_MARK, PORT168_FN3),
+ PINMUX_DATA(ET_ETXD2_MARK, PORT169_FN3),
+ PINMUX_DATA(ET_ETXD1_MARK, PORT170_FN3),
+ PINMUX_DATA(ET_ETXD0_MARK, PORT171_FN3),
+
+ /* Port166 - Port171 Function6 */
+ PINMUX_DATA(IDE_D5_MARK, PORT166_FN6),
+ PINMUX_DATA(IDE_D4_MARK, PORT167_FN6),
+ PINMUX_DATA(IDE_D3_MARK, PORT168_FN6),
+ PINMUX_DATA(IDE_D2_MARK, PORT169_FN6),
+ PINMUX_DATA(IDE_D1_MARK, PORT170_FN6),
+ PINMUX_DATA(IDE_D0_MARK, PORT171_FN6),
+
+ /* Port167 - Port171 IRQ */
+ PINMUX_DATA(IRQ31_PORT167_MARK, PORT167_FN0, MSEL1CR_31_0),
+ PINMUX_DATA(IRQ27_PORT168_MARK, PORT168_FN0, MSEL1CR_27_0),
+ PINMUX_DATA(IRQ28_PORT169_MARK, PORT169_FN0, MSEL1CR_28_0),
+ PINMUX_DATA(IRQ29_PORT170_MARK, PORT170_FN0, MSEL1CR_29_0),
+ PINMUX_DATA(IRQ30_PORT171_MARK, PORT171_FN0, MSEL1CR_30_0),
+
+ /* Port172 */
+ PINMUX_DATA(D23_MARK, PORT172_FN1),
+ PINMUX_DATA(SCIFB_RTS_PORT172_MARK, PORT172_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(ET_ETXD7_MARK, PORT172_FN3),
+ PINMUX_DATA(IDE_D7_MARK, PORT172_FN6),
+ PINMUX_DATA(IRQ4_PORT172_MARK, PORT172_FN0, MSEL1CR_4_1),
+
+ /* Port173 */
+ PINMUX_DATA(D22_MARK, PORT173_FN1),
+ PINMUX_DATA(SCIFB_CTS_PORT173_MARK, PORT173_FN2, MSEL5CR_17_1),
+ PINMUX_DATA(ET_ETXD6_MARK, PORT173_FN3),
+ PINMUX_DATA(IDE_D6_MARK, PORT173_FN6),
+ PINMUX_DATA(IRQ6_PORT173_MARK, PORT173_FN0, MSEL1CR_6_1),
+
+ /* Port174 */
+ PINMUX_DATA(A26_MARK, PORT174_FN1),
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT174_FN2),
+ PINMUX_DATA(ET_RX_CLK_MARK, PORT174_FN3),
+ PINMUX_DATA(SCIFA3_RXD_PORT174_MARK, PORT174_FN4, MSEL5CR_8_0),
+
+ /* Port175 */
+ PINMUX_DATA(A0_MARK, PORT175_FN1),
+ PINMUX_DATA(BS_MARK, PORT175_FN2),
+ PINMUX_DATA(ET_WOL_MARK, PORT175_FN3),
+ PINMUX_DATA(SCIFA3_TXD_PORT175_MARK, PORT175_FN4, MSEL5CR_8_0),
+
+ /* Port176 */
+ PINMUX_DATA(ET_GTX_CLK_MARK, PORT176_FN3),
+
+ /* Port177 */
+ PINMUX_DATA(WAIT_PORT177_MARK, PORT177_FN1, MSEL5CR_2_0),
+ PINMUX_DATA(ET_LINK_MARK, PORT177_FN3),
+ PINMUX_DATA(IDE_IOWR_MARK, PORT177_FN6),
+ PINMUX_DATA(SDHI2_WP_PORT177_MARK, PORT177_FN7, MSEL5CR_19_1),
+
+ /* Port178 */
+ PINMUX_DATA(VIO0_D12_MARK, PORT178_FN1),
+ PINMUX_DATA(VIO1_D4_MARK, PORT178_FN5),
+ PINMUX_DATA(IDE_IORD_MARK, PORT178_FN6),
+
+ /* Port179 */
+ PINMUX_DATA(VIO0_D11_MARK, PORT179_FN1),
+ PINMUX_DATA(VIO1_D3_MARK, PORT179_FN5),
+ PINMUX_DATA(IDE_IORDY_MARK, PORT179_FN6),
+
+ /* Port180 */
+ PINMUX_DATA(VIO0_D10_MARK, PORT180_FN1),
+ PINMUX_DATA(TPU0TO3_MARK, PORT180_FN4),
+ PINMUX_DATA(VIO1_D2_MARK, PORT180_FN5),
+ PINMUX_DATA(IDE_INT_MARK, PORT180_FN6),
+ PINMUX_DATA(IRQ24_MARK, PORT180_FN0),
+
+ /* Port181 */
+ PINMUX_DATA(VIO0_D9_MARK, PORT181_FN1),
+ PINMUX_DATA(VIO1_D1_MARK, PORT181_FN5),
+ PINMUX_DATA(IDE_RST_MARK, PORT181_FN6),
+
+ /* Port182 */
+ PINMUX_DATA(VIO0_D8_MARK, PORT182_FN1),
+ PINMUX_DATA(VIO1_D0_MARK, PORT182_FN5),
+ PINMUX_DATA(IDE_DIRECTION_MARK, PORT182_FN6),
+
+ /* Port183 */
+ PINMUX_DATA(DREQ1_MARK, PORT183_FN1),
+ PINMUX_DATA(BBIF2_TXD2_PORT183_MARK, PORT183_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(ET_TX_EN_MARK, PORT183_FN3),
+
+ /* Port184 */
+ PINMUX_DATA(DACK1_MARK, PORT184_FN1),
+ PINMUX_DATA(BBIF2_TSYNC2_PORT184_MARK, PORT184_FN2, MSEL5CR_0_1),
+ PINMUX_DATA(ET_TX_CLK_MARK, PORT184_FN3),
+
+ /* Port185 - Port192 Function1 */
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT185_FN1),
+ PINMUX_DATA(SCIFB_RTS_PORT186_MARK, PORT186_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_CTS_PORT187_MARK, PORT187_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT188_FN1),
+ PINMUX_DATA(SCIFB_SCK_PORT190_MARK, PORT190_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_RXD_PORT191_MARK, PORT191_FN1, MSEL5CR_17_0),
+ PINMUX_DATA(SCIFB_TXD_PORT192_MARK, PORT192_FN1, MSEL5CR_17_0),
+
+ /* Port185 - Port192 Function3 */
+ PINMUX_DATA(ET_ERXD0_MARK, PORT185_FN3),
+ PINMUX_DATA(ET_ERXD1_MARK, PORT186_FN3),
+ PINMUX_DATA(ET_ERXD2_MARK, PORT187_FN3),
+ PINMUX_DATA(ET_ERXD3_MARK, PORT188_FN3),
+ PINMUX_DATA(ET_ERXD4_MARK, PORT189_FN3),
+ PINMUX_DATA(ET_ERXD5_MARK, PORT190_FN3),
+ PINMUX_DATA(ET_ERXD6_MARK, PORT191_FN3),
+ PINMUX_DATA(ET_ERXD7_MARK, PORT192_FN3),
+
+ /* Port185 - Port192 Function6 */
+ PINMUX_DATA(STP1_IPCLK_MARK, PORT185_FN6),
+ PINMUX_DATA(STP1_IPD0_PORT186_MARK, PORT186_FN6, MSEL5CR_23_0),
+ PINMUX_DATA(STP1_IPEN_PORT187_MARK, PORT187_FN6, MSEL5CR_23_0),
+ PINMUX_DATA(STP1_IPSYNC_MARK, PORT188_FN6),
+ PINMUX_DATA(STP0_IPCLK_MARK, PORT189_FN6),
+ PINMUX_DATA(STP0_IPD0_MARK, PORT190_FN6),
+ PINMUX_DATA(STP0_IPEN_MARK, PORT191_FN6),
+ PINMUX_DATA(STP0_IPSYNC_MARK, PORT192_FN6),
+
+ /* Port193 */
+ PINMUX_DATA(SCIFA0_CTS_MARK, PORT193_FN1),
+ PINMUX_DATA(RMII_CRS_DV_MARK, PORT193_FN3),
+ PINMUX_DATA(STP1_IPEN_PORT193_MARK, PORT193_FN6, MSEL5CR_23_1),
+ PINMUX_DATA(LCD1_D17_MARK, PORT193_FN7),
+
+ /* Port194 */
+ PINMUX_DATA(SCIFA0_RTS_MARK, PORT194_FN1),
+ PINMUX_DATA(RMII_RX_ER_MARK, PORT194_FN3),
+ PINMUX_DATA(STP1_IPD0_PORT194_MARK, PORT194_FN6, MSEL5CR_23_1),
+ PINMUX_DATA(LCD1_D16_MARK, PORT194_FN7),
+
+ /* Port195 */
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT195_FN1),
+ PINMUX_DATA(RMII_RXD0_MARK, PORT195_FN3),
+ PINMUX_DATA(STP1_IPD3_MARK, PORT195_FN6),
+ PINMUX_DATA(LCD1_D15_MARK, PORT195_FN7),
+
+ /* Port196 */
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT196_FN1),
+ PINMUX_DATA(RMII_RXD1_MARK, PORT196_FN3),
+ PINMUX_DATA(STP1_IPD2_MARK, PORT196_FN6),
+ PINMUX_DATA(LCD1_D14_MARK, PORT196_FN7),
+
+ /* Port197 */
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT197_FN1),
+ PINMUX_DATA(VIO1_CLK_MARK, PORT197_FN5),
+ PINMUX_DATA(STP1_IPD5_MARK, PORT197_FN6),
+ PINMUX_DATA(LCD1_D19_MARK, PORT197_FN7),
+
+ /* Port198 */
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT198_FN1),
+ PINMUX_DATA(VIO1_VD_MARK, PORT198_FN5),
+ PINMUX_DATA(STP1_IPD4_MARK, PORT198_FN6),
+ PINMUX_DATA(LCD1_D18_MARK, PORT198_FN7),
+
+ /* Port199 */
+ PINMUX_DATA(MEMC_NWE_MARK, PORT199_FN1),
+ PINMUX_DATA(SCIFA2_SCK_PORT199_MARK, PORT199_FN2, MSEL5CR_7_1),
+ PINMUX_DATA(RMII_TX_EN_MARK, PORT199_FN3),
+ PINMUX_DATA(SIM_D_PORT199_MARK, PORT199_FN4, MSEL5CR_21_1),
+ PINMUX_DATA(STP1_IPD1_MARK, PORT199_FN6),
+ PINMUX_DATA(LCD1_D13_MARK, PORT199_FN7),
+
+ /* Port200 */
+ PINMUX_DATA(MEMC_NOE_MARK, PORT200_FN1),
+ PINMUX_DATA(SCIFA2_RXD_MARK, PORT200_FN2),
+ PINMUX_DATA(RMII_TXD0_MARK, PORT200_FN3),
+ PINMUX_DATA(STP0_IPD7_MARK, PORT200_FN6),
+ PINMUX_DATA(LCD1_D12_MARK, PORT200_FN7),
+
+ /* Port201 */
+ PINMUX_DATA(MEMC_WAIT_MARK, PORT201_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_DREQ1_MARK, PORT201_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(SCIFA2_TXD_MARK, PORT201_FN2),
+ PINMUX_DATA(RMII_TXD1_MARK, PORT201_FN3),
+ PINMUX_DATA(STP0_IPD6_MARK, PORT201_FN6),
+ PINMUX_DATA(LCD1_D11_MARK, PORT201_FN7),
+
+ /* Port202 */
+ PINMUX_DATA(MEMC_BUSCLK_MARK, PORT202_FN1, MSEL4CR_6_0),
+ PINMUX_DATA(MEMC_A0_MARK, PORT202_FN1, MSEL4CR_6_1),
+
+ PINMUX_DATA(MSIOF1_SS2_PORT202_MARK, PORT202_FN2, MSEL4CR_10_1),
+ PINMUX_DATA(RMII_MDC_MARK, PORT202_FN3),
+ PINMUX_DATA(TPU0TO2_PORT202_MARK, PORT202_FN4, MSEL5CR_25_1),
+ PINMUX_DATA(IDE_CS0_MARK, PORT202_FN6),
+ PINMUX_DATA(SDHI2_CD_PORT202_MARK, PORT202_FN7, MSEL5CR_19_1),
+ PINMUX_DATA(IRQ21_MARK, PORT202_FN0),
+
+ /* Port203 - Port208 Function1 */
+ PINMUX_DATA(SDHI2_CLK_MARK, PORT203_FN1),
+ PINMUX_DATA(SDHI2_CMD_MARK, PORT204_FN1),
+ PINMUX_DATA(SDHI2_D0_MARK, PORT205_FN1),
+ PINMUX_DATA(SDHI2_D1_MARK, PORT206_FN1),
+ PINMUX_DATA(SDHI2_D2_MARK, PORT207_FN1),
+ PINMUX_DATA(SDHI2_D3_MARK, PORT208_FN1),
+
+ /* Port203 - Port208 Function3 */
+ PINMUX_DATA(ET_TX_ER_MARK, PORT203_FN3),
+ PINMUX_DATA(ET_RX_ER_MARK, PORT204_FN3),
+ PINMUX_DATA(ET_CRS_MARK, PORT205_FN3),
+ PINMUX_DATA(ET_MDC_MARK, PORT206_FN3),
+ PINMUX_DATA(ET_MDIO_MARK, PORT207_FN3),
+ PINMUX_DATA(RMII_MDIO_MARK, PORT208_FN3),
+
+ /* Port203 - Port208 Function6 */
+ PINMUX_DATA(IDE_A2_MARK, PORT203_FN6),
+ PINMUX_DATA(IDE_A1_MARK, PORT204_FN6),
+ PINMUX_DATA(IDE_A0_MARK, PORT205_FN6),
+ PINMUX_DATA(IDE_IODACK_MARK, PORT206_FN6),
+ PINMUX_DATA(IDE_IODREQ_MARK, PORT207_FN6),
+ PINMUX_DATA(IDE_CS1_MARK, PORT208_FN6),
+
+ /* Port203 - Port208 Function7 */
+ PINMUX_DATA(SCIFA4_TXD_PORT203_MARK, PORT203_FN7, MSEL5CR_12_0,
+ MSEL5CR_11_1),
+ PINMUX_DATA(SCIFA4_RXD_PORT204_MARK, PORT204_FN7, MSEL5CR_12_0,
+ MSEL5CR_11_1),
+ PINMUX_DATA(SCIFA4_SCK_PORT205_MARK, PORT205_FN7, MSEL5CR_10_1),
+ PINMUX_DATA(SCIFA5_SCK_PORT206_MARK, PORT206_FN7, MSEL5CR_13_1),
+ PINMUX_DATA(SCIFA5_RXD_PORT207_MARK, PORT207_FN7, MSEL5CR_15_0,
+ MSEL5CR_14_1),
+ PINMUX_DATA(SCIFA5_TXD_PORT208_MARK, PORT208_FN7, MSEL5CR_15_0,
+ MSEL5CR_14_1),
+
+ /* Port209 */
+ PINMUX_DATA(VBUS_MARK, PORT209_FN1),
+ PINMUX_DATA(IRQ7_PORT209_MARK, PORT209_FN0, MSEL1CR_7_1),
+
+ /* Port210 */
+ PINMUX_DATA(IRQ9_PORT210_MARK, PORT210_FN0, MSEL1CR_9_1),
+
+ /* Port211 */
+ PINMUX_DATA(IRQ16_PORT211_MARK, PORT211_FN0, MSEL1CR_16_1),
+
+ /* LCDC select */
+ PINMUX_DATA(LCDC0_SELECT_MARK, MSEL3CR_6_0),
+ PINMUX_DATA(LCDC1_SELECT_MARK, MSEL3CR_6_1),
+
+ /* SDENC */
+ PINMUX_DATA(SDENC_CPG_MARK, MSEL4CR_19_0),
+ PINMUX_DATA(SDENC_DV_CLKI_MARK, MSEL4CR_19_1),
+
+ /* SYSC */
+ PINMUX_DATA(RESETP_PULLUP_MARK, MSEL4CR_4_0),
+ PINMUX_DATA(RESETP_PLAIN_MARK, MSEL4CR_4_1),
+
+ /* DEBUG */
+ PINMUX_DATA(EDEBGREQ_PULLDOWN_MARK, MSEL4CR_1_0),
+ PINMUX_DATA(EDEBGREQ_PULLUP_MARK, MSEL4CR_1_1),
+
+ PINMUX_DATA(TRACEAUD_FROM_VIO_MARK, MSEL5CR_30_0, MSEL5CR_29_0),
+ PINMUX_DATA(TRACEAUD_FROM_LCDC0_MARK, MSEL5CR_30_0, MSEL5CR_29_1),
+ PINMUX_DATA(TRACEAUD_FROM_MEMC_MARK, MSEL5CR_30_1, MSEL5CR_29_0),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+
+ /* PORT */
+ GPIO_PORT_ALL(),
+
+ /* IRQ */
+ GPIO_FN(IRQ0_PORT2), GPIO_FN(IRQ0_PORT13),
+ GPIO_FN(IRQ1),
+ GPIO_FN(IRQ2_PORT11), GPIO_FN(IRQ2_PORT12),
+ GPIO_FN(IRQ3_PORT10), GPIO_FN(IRQ3_PORT14),
+ GPIO_FN(IRQ4_PORT15), GPIO_FN(IRQ4_PORT172),
+ GPIO_FN(IRQ5_PORT0), GPIO_FN(IRQ5_PORT1),
+ GPIO_FN(IRQ6_PORT121), GPIO_FN(IRQ6_PORT173),
+ GPIO_FN(IRQ7_PORT120), GPIO_FN(IRQ7_PORT209),
+ GPIO_FN(IRQ8),
+ GPIO_FN(IRQ9_PORT118), GPIO_FN(IRQ9_PORT210),
+ GPIO_FN(IRQ10),
+ GPIO_FN(IRQ11),
+ GPIO_FN(IRQ12_PORT42), GPIO_FN(IRQ12_PORT97),
+ GPIO_FN(IRQ13_PORT64), GPIO_FN(IRQ13_PORT98),
+ GPIO_FN(IRQ14_PORT63), GPIO_FN(IRQ14_PORT99),
+ GPIO_FN(IRQ15_PORT62), GPIO_FN(IRQ15_PORT100),
+ GPIO_FN(IRQ16_PORT68), GPIO_FN(IRQ16_PORT211),
+ GPIO_FN(IRQ17),
+ GPIO_FN(IRQ18),
+ GPIO_FN(IRQ19),
+ GPIO_FN(IRQ20),
+ GPIO_FN(IRQ21),
+ GPIO_FN(IRQ22),
+ GPIO_FN(IRQ23),
+ GPIO_FN(IRQ24),
+ GPIO_FN(IRQ25),
+ GPIO_FN(IRQ26_PORT58), GPIO_FN(IRQ26_PORT81),
+ GPIO_FN(IRQ27_PORT57), GPIO_FN(IRQ27_PORT168),
+ GPIO_FN(IRQ28_PORT56), GPIO_FN(IRQ28_PORT169),
+ GPIO_FN(IRQ29_PORT50), GPIO_FN(IRQ29_PORT170),
+ GPIO_FN(IRQ30_PORT49), GPIO_FN(IRQ30_PORT171),
+ GPIO_FN(IRQ31_PORT41), GPIO_FN(IRQ31_PORT167),
+
+ /* Function */
+
+ /* DBGT */
+ GPIO_FN(DBGMDT2), GPIO_FN(DBGMDT1), GPIO_FN(DBGMDT0),
+ GPIO_FN(DBGMD10), GPIO_FN(DBGMD11), GPIO_FN(DBGMD20),
+ GPIO_FN(DBGMD21),
+
+ /* FSI */
+ GPIO_FN(FSIAISLD_PORT0), /* FSIAISLD Port 0/5 */
+ GPIO_FN(FSIAISLD_PORT5),
+ GPIO_FN(FSIASPDIF_PORT9), /* FSIASPDIF Port 9/18 */
+ GPIO_FN(FSIASPDIF_PORT18),
+ GPIO_FN(FSIAOSLD1), GPIO_FN(FSIAOSLD2), GPIO_FN(FSIAOLR),
+ GPIO_FN(FSIAOBT), GPIO_FN(FSIAOSLD), GPIO_FN(FSIAOMC),
+ GPIO_FN(FSIACK), GPIO_FN(FSIAILR), GPIO_FN(FSIAIBT),
+
+ /* FMSI */
+ GPIO_FN(FMSISLD_PORT1), /* FMSISLD Port 1/6 */
+ GPIO_FN(FMSISLD_PORT6),
+ GPIO_FN(FMSIILR), GPIO_FN(FMSIIBT), GPIO_FN(FMSIOLR),
+ GPIO_FN(FMSIOBT), GPIO_FN(FMSICK), GPIO_FN(FMSOILR),
+ GPIO_FN(FMSOIBT), GPIO_FN(FMSOOLR), GPIO_FN(FMSOOBT),
+ GPIO_FN(FMSOSLD), GPIO_FN(FMSOCK),
+
+ /* SCIFA0 */
+ GPIO_FN(SCIFA0_SCK), GPIO_FN(SCIFA0_CTS), GPIO_FN(SCIFA0_RTS),
+ GPIO_FN(SCIFA0_RXD), GPIO_FN(SCIFA0_TXD),
+
+ /* SCIFA1 */
+ GPIO_FN(SCIFA1_CTS), GPIO_FN(SCIFA1_SCK),
+ GPIO_FN(SCIFA1_RXD), GPIO_FN(SCIFA1_TXD), GPIO_FN(SCIFA1_RTS),
+
+ /* SCIFA2 */
+ GPIO_FN(SCIFA2_SCK_PORT22), /* SCIFA2_SCK Port 22/199 */
+ GPIO_FN(SCIFA2_SCK_PORT199),
+ GPIO_FN(SCIFA2_RXD), GPIO_FN(SCIFA2_TXD),
+ GPIO_FN(SCIFA2_CTS), GPIO_FN(SCIFA2_RTS),
+
+ /* SCIFA3 */
+ GPIO_FN(SCIFA3_RTS_PORT105), /* MSEL5CR_8_0 */
+ GPIO_FN(SCIFA3_SCK_PORT116),
+ GPIO_FN(SCIFA3_CTS_PORT117),
+ GPIO_FN(SCIFA3_RXD_PORT174),
+ GPIO_FN(SCIFA3_TXD_PORT175),
+
+ GPIO_FN(SCIFA3_RTS_PORT161), /* MSEL5CR_8_1 */
+ GPIO_FN(SCIFA3_SCK_PORT158),
+ GPIO_FN(SCIFA3_CTS_PORT162),
+ GPIO_FN(SCIFA3_RXD_PORT159),
+ GPIO_FN(SCIFA3_TXD_PORT160),
+
+ /* SCIFA4 */
+ GPIO_FN(SCIFA4_RXD_PORT12), /* MSEL5CR[12:11] = 00 */
+ GPIO_FN(SCIFA4_TXD_PORT13),
+
+ GPIO_FN(SCIFA4_RXD_PORT204), /* MSEL5CR[12:11] = 01 */
+ GPIO_FN(SCIFA4_TXD_PORT203),
+
+ GPIO_FN(SCIFA4_RXD_PORT94), /* MSEL5CR[12:11] = 10 */
+ GPIO_FN(SCIFA4_TXD_PORT93),
+
+ GPIO_FN(SCIFA4_SCK_PORT21), /* SCIFA4_SCK Port 21/205 */
+ GPIO_FN(SCIFA4_SCK_PORT205),
+
+ /* SCIFA5 */
+ GPIO_FN(SCIFA5_TXD_PORT20), /* MSEL5CR[15:14] = 00 */
+ GPIO_FN(SCIFA5_RXD_PORT10),
+
+ GPIO_FN(SCIFA5_RXD_PORT207), /* MSEL5CR[15:14] = 01 */
+ GPIO_FN(SCIFA5_TXD_PORT208),
+
+ GPIO_FN(SCIFA5_TXD_PORT91), /* MSEL5CR[15:14] = 10 */
+ GPIO_FN(SCIFA5_RXD_PORT92),
+
+ GPIO_FN(SCIFA5_SCK_PORT23), /* SCIFA5_SCK Port 23/206 */
+ GPIO_FN(SCIFA5_SCK_PORT206),
+
+ /* SCIFA6 */
+ GPIO_FN(SCIFA6_SCK), GPIO_FN(SCIFA6_RXD), GPIO_FN(SCIFA6_TXD),
+
+ /* SCIFA7 */
+ GPIO_FN(SCIFA7_TXD), GPIO_FN(SCIFA7_RXD),
+
+ /* SCIFAB */
+ GPIO_FN(SCIFB_SCK_PORT190), /* MSEL5CR_17_0 */
+ GPIO_FN(SCIFB_RXD_PORT191),
+ GPIO_FN(SCIFB_TXD_PORT192),
+ GPIO_FN(SCIFB_RTS_PORT186),
+ GPIO_FN(SCIFB_CTS_PORT187),
+
+ GPIO_FN(SCIFB_SCK_PORT2), /* MSEL5CR_17_1 */
+ GPIO_FN(SCIFB_RXD_PORT3),
+ GPIO_FN(SCIFB_TXD_PORT4),
+ GPIO_FN(SCIFB_RTS_PORT172),
+ GPIO_FN(SCIFB_CTS_PORT173),
+
+ /* LCD0 */
+ GPIO_FN(LCD0_D0), GPIO_FN(LCD0_D1), GPIO_FN(LCD0_D2),
+ GPIO_FN(LCD0_D3), GPIO_FN(LCD0_D4), GPIO_FN(LCD0_D5),
+ GPIO_FN(LCD0_D6), GPIO_FN(LCD0_D7), GPIO_FN(LCD0_D8),
+ GPIO_FN(LCD0_D9), GPIO_FN(LCD0_D10), GPIO_FN(LCD0_D11),
+ GPIO_FN(LCD0_D12), GPIO_FN(LCD0_D13), GPIO_FN(LCD0_D14),
+ GPIO_FN(LCD0_D15), GPIO_FN(LCD0_D16), GPIO_FN(LCD0_D17),
+ GPIO_FN(LCD0_DON), GPIO_FN(LCD0_VCPWC), GPIO_FN(LCD0_VEPWC),
+ GPIO_FN(LCD0_DCK), GPIO_FN(LCD0_VSYN),
+ GPIO_FN(LCD0_HSYN), GPIO_FN(LCD0_DISP),
+ GPIO_FN(LCD0_WR), GPIO_FN(LCD0_RD),
+ GPIO_FN(LCD0_CS), GPIO_FN(LCD0_RS),
+
+ GPIO_FN(LCD0_D18_PORT163), GPIO_FN(LCD0_D19_PORT162),
+ GPIO_FN(LCD0_D20_PORT161), GPIO_FN(LCD0_D21_PORT158),
+ GPIO_FN(LCD0_D22_PORT160), GPIO_FN(LCD0_D23_PORT159),
+ GPIO_FN(LCD0_LCLK_PORT165), /* MSEL5CR_6_1 */
+
+ GPIO_FN(LCD0_D18_PORT40), GPIO_FN(LCD0_D19_PORT4),
+ GPIO_FN(LCD0_D20_PORT3), GPIO_FN(LCD0_D21_PORT2),
+ GPIO_FN(LCD0_D22_PORT0), GPIO_FN(LCD0_D23_PORT1),
+ GPIO_FN(LCD0_LCLK_PORT102), /* MSEL5CR_6_0 */
+
+ /* LCD1 */
+ GPIO_FN(LCD1_D0), GPIO_FN(LCD1_D1), GPIO_FN(LCD1_D2),
+ GPIO_FN(LCD1_D3), GPIO_FN(LCD1_D4), GPIO_FN(LCD1_D5),
+ GPIO_FN(LCD1_D6), GPIO_FN(LCD1_D7), GPIO_FN(LCD1_D8),
+ GPIO_FN(LCD1_D9), GPIO_FN(LCD1_D10), GPIO_FN(LCD1_D11),
+ GPIO_FN(LCD1_D12), GPIO_FN(LCD1_D13), GPIO_FN(LCD1_D14),
+ GPIO_FN(LCD1_D15), GPIO_FN(LCD1_D16), GPIO_FN(LCD1_D17),
+ GPIO_FN(LCD1_D18), GPIO_FN(LCD1_D19), GPIO_FN(LCD1_D20),
+ GPIO_FN(LCD1_D21), GPIO_FN(LCD1_D22), GPIO_FN(LCD1_D23),
+ GPIO_FN(LCD1_RS), GPIO_FN(LCD1_RD), GPIO_FN(LCD1_CS),
+ GPIO_FN(LCD1_WR), GPIO_FN(LCD1_DCK), GPIO_FN(LCD1_DON),
+ GPIO_FN(LCD1_VCPWC), GPIO_FN(LCD1_LCLK), GPIO_FN(LCD1_HSYN),
+ GPIO_FN(LCD1_VSYN), GPIO_FN(LCD1_VEPWC), GPIO_FN(LCD1_DISP),
+
+ /* RSPI */
+ GPIO_FN(RSPI_SSL0_A), GPIO_FN(RSPI_SSL1_A), GPIO_FN(RSPI_SSL2_A),
+ GPIO_FN(RSPI_SSL3_A), GPIO_FN(RSPI_CK_A), GPIO_FN(RSPI_MOSI_A),
+ GPIO_FN(RSPI_MISO_A),
+
+ /* VIO CKO */
+ GPIO_FN(VIO_CKO1),
+ GPIO_FN(VIO_CKO2),
+ GPIO_FN(VIO_CKO_1),
+ GPIO_FN(VIO_CKO),
+
+ /* VIO0 */
+ GPIO_FN(VIO0_D0), GPIO_FN(VIO0_D1), GPIO_FN(VIO0_D2),
+ GPIO_FN(VIO0_D3), GPIO_FN(VIO0_D4), GPIO_FN(VIO0_D5),
+ GPIO_FN(VIO0_D6), GPIO_FN(VIO0_D7), GPIO_FN(VIO0_D8),
+ GPIO_FN(VIO0_D9), GPIO_FN(VIO0_D10), GPIO_FN(VIO0_D11),
+ GPIO_FN(VIO0_D12), GPIO_FN(VIO0_VD), GPIO_FN(VIO0_HD),
+ GPIO_FN(VIO0_CLK), GPIO_FN(VIO0_FIELD),
+
+ GPIO_FN(VIO0_D13_PORT26), /* MSEL5CR_27_0 */
+ GPIO_FN(VIO0_D14_PORT25),
+ GPIO_FN(VIO0_D15_PORT24),
+
+ GPIO_FN(VIO0_D13_PORT22), /* MSEL5CR_27_1 */
+ GPIO_FN(VIO0_D14_PORT95),
+ GPIO_FN(VIO0_D15_PORT96),
+
+ /* VIO1 */
+ GPIO_FN(VIO1_D0), GPIO_FN(VIO1_D1), GPIO_FN(VIO1_D2),
+ GPIO_FN(VIO1_D3), GPIO_FN(VIO1_D4), GPIO_FN(VIO1_D5),
+ GPIO_FN(VIO1_D6), GPIO_FN(VIO1_D7), GPIO_FN(VIO1_VD),
+ GPIO_FN(VIO1_HD), GPIO_FN(VIO1_CLK), GPIO_FN(VIO1_FIELD),
+
+ /* TPU0 */
+ GPIO_FN(TPU0TO0), GPIO_FN(TPU0TO1), GPIO_FN(TPU0TO3),
+ GPIO_FN(TPU0TO2_PORT66), /* TPU0TO2 Port 66/202 */
+ GPIO_FN(TPU0TO2_PORT202),
+
+ /* SSP1 0 */
+ GPIO_FN(STP0_IPD0), GPIO_FN(STP0_IPD1), GPIO_FN(STP0_IPD2),
+ GPIO_FN(STP0_IPD3), GPIO_FN(STP0_IPD4), GPIO_FN(STP0_IPD5),
+ GPIO_FN(STP0_IPD6), GPIO_FN(STP0_IPD7), GPIO_FN(STP0_IPEN),
+ GPIO_FN(STP0_IPCLK), GPIO_FN(STP0_IPSYNC),
+
+ /* SSP1 1 */
+ GPIO_FN(STP1_IPD1), GPIO_FN(STP1_IPD2), GPIO_FN(STP1_IPD3),
+ GPIO_FN(STP1_IPD4), GPIO_FN(STP1_IPD5), GPIO_FN(STP1_IPD6),
+ GPIO_FN(STP1_IPD7), GPIO_FN(STP1_IPCLK), GPIO_FN(STP1_IPSYNC),
+
+ GPIO_FN(STP1_IPD0_PORT186), /* MSEL5CR_23_0 */
+ GPIO_FN(STP1_IPEN_PORT187),
+
+ GPIO_FN(STP1_IPD0_PORT194), /* MSEL5CR_23_1 */
+ GPIO_FN(STP1_IPEN_PORT193),
+
+ /* SIM */
+ GPIO_FN(SIM_RST), GPIO_FN(SIM_CLK),
+ GPIO_FN(SIM_D_PORT22), /* SIM_D Port 22/199 */
+ GPIO_FN(SIM_D_PORT199),
+
+ /* SDHI0 */
+ GPIO_FN(SDHI0_D0), GPIO_FN(SDHI0_D1), GPIO_FN(SDHI0_D2),
+ GPIO_FN(SDHI0_D3), GPIO_FN(SDHI0_CD), GPIO_FN(SDHI0_WP),
+ GPIO_FN(SDHI0_CMD), GPIO_FN(SDHI0_CLK),
+
+ /* SDHI1 */
+ GPIO_FN(SDHI1_D0), GPIO_FN(SDHI1_D1), GPIO_FN(SDHI1_D2),
+ GPIO_FN(SDHI1_D3), GPIO_FN(SDHI1_CD), GPIO_FN(SDHI1_WP),
+ GPIO_FN(SDHI1_CMD), GPIO_FN(SDHI1_CLK),
+
+ /* SDHI2 */
+ GPIO_FN(SDHI2_D0), GPIO_FN(SDHI2_D1), GPIO_FN(SDHI2_D2),
+ GPIO_FN(SDHI2_D3), GPIO_FN(SDHI2_CLK), GPIO_FN(SDHI2_CMD),
+
+ GPIO_FN(SDHI2_CD_PORT24), /* MSEL5CR_19_0 */
+ GPIO_FN(SDHI2_WP_PORT25),
+
+ GPIO_FN(SDHI2_WP_PORT177), /* MSEL5CR_19_1 */
+ GPIO_FN(SDHI2_CD_PORT202),
+
+ /* MSIOF2 */
+ GPIO_FN(MSIOF2_TXD), GPIO_FN(MSIOF2_RXD), GPIO_FN(MSIOF2_TSCK),
+ GPIO_FN(MSIOF2_SS2), GPIO_FN(MSIOF2_TSYNC), GPIO_FN(MSIOF2_SS1),
+ GPIO_FN(MSIOF2_MCK1), GPIO_FN(MSIOF2_MCK0), GPIO_FN(MSIOF2_RSYNC),
+ GPIO_FN(MSIOF2_RSCK),
+
+ /* KEYSC */
+ GPIO_FN(KEYIN4), GPIO_FN(KEYIN5),
+ GPIO_FN(KEYIN6), GPIO_FN(KEYIN7),
+ GPIO_FN(KEYOUT0), GPIO_FN(KEYOUT1), GPIO_FN(KEYOUT2),
+ GPIO_FN(KEYOUT3), GPIO_FN(KEYOUT4), GPIO_FN(KEYOUT5),
+ GPIO_FN(KEYOUT6), GPIO_FN(KEYOUT7),
+
+ GPIO_FN(KEYIN0_PORT43), /* MSEL4CR_18_0 */
+ GPIO_FN(KEYIN1_PORT44),
+ GPIO_FN(KEYIN2_PORT45),
+ GPIO_FN(KEYIN3_PORT46),
+
+ GPIO_FN(KEYIN0_PORT58), /* MSEL4CR_18_1 */
+ GPIO_FN(KEYIN1_PORT57),
+ GPIO_FN(KEYIN2_PORT56),
+ GPIO_FN(KEYIN3_PORT55),
+
+ /* VOU */
+ GPIO_FN(DV_D0), GPIO_FN(DV_D1), GPIO_FN(DV_D2),
+ GPIO_FN(DV_D3), GPIO_FN(DV_D4), GPIO_FN(DV_D5),
+ GPIO_FN(DV_D6), GPIO_FN(DV_D7), GPIO_FN(DV_D8),
+ GPIO_FN(DV_D9), GPIO_FN(DV_D10), GPIO_FN(DV_D11),
+ GPIO_FN(DV_D12), GPIO_FN(DV_D13), GPIO_FN(DV_D14),
+ GPIO_FN(DV_D15), GPIO_FN(DV_CLK),
+ GPIO_FN(DV_VSYNC), GPIO_FN(DV_HSYNC),
+
+ /* MEMC */
+ GPIO_FN(MEMC_AD0), GPIO_FN(MEMC_AD1), GPIO_FN(MEMC_AD2),
+ GPIO_FN(MEMC_AD3), GPIO_FN(MEMC_AD4), GPIO_FN(MEMC_AD5),
+ GPIO_FN(MEMC_AD6), GPIO_FN(MEMC_AD7), GPIO_FN(MEMC_AD8),
+ GPIO_FN(MEMC_AD9), GPIO_FN(MEMC_AD10), GPIO_FN(MEMC_AD11),
+ GPIO_FN(MEMC_AD12), GPIO_FN(MEMC_AD13), GPIO_FN(MEMC_AD14),
+ GPIO_FN(MEMC_AD15), GPIO_FN(MEMC_CS0), GPIO_FN(MEMC_INT),
+ GPIO_FN(MEMC_NWE), GPIO_FN(MEMC_NOE), GPIO_FN(MEMC_CS1),
+ GPIO_FN(MEMC_A1), GPIO_FN(MEMC_ADV), GPIO_FN(MEMC_DREQ0),
+ GPIO_FN(MEMC_WAIT), GPIO_FN(MEMC_DREQ1), GPIO_FN(MEMC_BUSCLK),
+ GPIO_FN(MEMC_A0),
+
+ /* MMC */
+ GPIO_FN(MMC0_D0_PORT68), GPIO_FN(MMC0_D1_PORT69),
+ GPIO_FN(MMC0_D2_PORT70), GPIO_FN(MMC0_D3_PORT71),
+ GPIO_FN(MMC0_D4_PORT72), GPIO_FN(MMC0_D5_PORT73),
+ GPIO_FN(MMC0_D6_PORT74), GPIO_FN(MMC0_D7_PORT75),
+ GPIO_FN(MMC0_CLK_PORT66),
+ GPIO_FN(MMC0_CMD_PORT67), /* MSEL4CR_15_0 */
+
+ GPIO_FN(MMC1_D0_PORT149), GPIO_FN(MMC1_D1_PORT148),
+ GPIO_FN(MMC1_D2_PORT147), GPIO_FN(MMC1_D3_PORT146),
+ GPIO_FN(MMC1_D4_PORT145), GPIO_FN(MMC1_D5_PORT144),
+ GPIO_FN(MMC1_D6_PORT143), GPIO_FN(MMC1_D7_PORT142),
+ GPIO_FN(MMC1_CLK_PORT103),
+ GPIO_FN(MMC1_CMD_PORT104), /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ GPIO_FN(MSIOF0_SS1), GPIO_FN(MSIOF0_SS2), GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(MSIOF0_TXD), GPIO_FN(MSIOF0_MCK0), GPIO_FN(MSIOF0_MCK1),
+ GPIO_FN(MSIOF0_RSYNC), GPIO_FN(MSIOF0_RSCK), GPIO_FN(MSIOF0_TSCK),
+ GPIO_FN(MSIOF0_TSYNC),
+
+ /* MSIOF1 */
+ GPIO_FN(MSIOF1_RSCK), GPIO_FN(MSIOF1_RSYNC),
+ GPIO_FN(MSIOF1_MCK0), GPIO_FN(MSIOF1_MCK1),
+
+ GPIO_FN(MSIOF1_SS2_PORT116), GPIO_FN(MSIOF1_SS1_PORT117),
+ GPIO_FN(MSIOF1_RXD_PORT118), GPIO_FN(MSIOF1_TXD_PORT119),
+ GPIO_FN(MSIOF1_TSYNC_PORT120),
+ GPIO_FN(MSIOF1_TSCK_PORT121), /* MSEL4CR_10_0 */
+
+ GPIO_FN(MSIOF1_SS1_PORT67), GPIO_FN(MSIOF1_TSCK_PORT72),
+ GPIO_FN(MSIOF1_TSYNC_PORT73), GPIO_FN(MSIOF1_TXD_PORT74),
+ GPIO_FN(MSIOF1_RXD_PORT75),
+ GPIO_FN(MSIOF1_SS2_PORT202), /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPIO_FN(GPO0), GPIO_FN(GPI0),
+ GPIO_FN(GPO1), GPIO_FN(GPI1),
+
+ /* USB0 */
+ GPIO_FN(USB0_OCI), GPIO_FN(USB0_PPON), GPIO_FN(VBUS),
+
+ /* USB1 */
+ GPIO_FN(USB1_OCI), GPIO_FN(USB1_PPON),
+
+ /* BBIF1 */
+ GPIO_FN(BBIF1_RXD), GPIO_FN(BBIF1_TXD), GPIO_FN(BBIF1_TSYNC),
+ GPIO_FN(BBIF1_TSCK), GPIO_FN(BBIF1_RSCK), GPIO_FN(BBIF1_RSYNC),
+ GPIO_FN(BBIF1_FLOW), GPIO_FN(BBIF1_RX_FLOW_N),
+
+ /* BBIF2 */
+ GPIO_FN(BBIF2_TXD2_PORT5), /* MSEL5CR_0_0 */
+ GPIO_FN(BBIF2_RXD2_PORT60),
+ GPIO_FN(BBIF2_TSYNC2_PORT6),
+ GPIO_FN(BBIF2_TSCK2_PORT59),
+
+ GPIO_FN(BBIF2_RXD2_PORT90), /* MSEL5CR_0_1 */
+ GPIO_FN(BBIF2_TXD2_PORT183),
+ GPIO_FN(BBIF2_TSCK2_PORT89),
+ GPIO_FN(BBIF2_TSYNC2_PORT184),
+
+ /* BSC / FLCTL / PCMCIA */
+ GPIO_FN(CS0), GPIO_FN(CS2), GPIO_FN(CS4),
+ GPIO_FN(CS5B), GPIO_FN(CS6A),
+ GPIO_FN(CS5A_PORT105), /* CS5A PORT 19/105 */
+ GPIO_FN(CS5A_PORT19),
+ GPIO_FN(IOIS16), /* ? */
+
+ GPIO_FN(A0), GPIO_FN(A1), GPIO_FN(A2), GPIO_FN(A3),
+ GPIO_FN(A4_FOE), GPIO_FN(A5_FCDE), /* share with FLCTL */
+ GPIO_FN(A6), GPIO_FN(A7), GPIO_FN(A8), GPIO_FN(A9),
+ GPIO_FN(A10), GPIO_FN(A11), GPIO_FN(A12), GPIO_FN(A13),
+ GPIO_FN(A14), GPIO_FN(A15), GPIO_FN(A16), GPIO_FN(A17),
+ GPIO_FN(A18), GPIO_FN(A19), GPIO_FN(A20), GPIO_FN(A21),
+ GPIO_FN(A22), GPIO_FN(A23), GPIO_FN(A24), GPIO_FN(A25),
+ GPIO_FN(A26),
+
+ GPIO_FN(D0_NAF0), GPIO_FN(D1_NAF1), /* share with FLCTL */
+ GPIO_FN(D2_NAF2), GPIO_FN(D3_NAF3), /* share with FLCTL */
+ GPIO_FN(D4_NAF4), GPIO_FN(D5_NAF5), /* share with FLCTL */
+ GPIO_FN(D6_NAF6), GPIO_FN(D7_NAF7), /* share with FLCTL */
+ GPIO_FN(D8_NAF8), GPIO_FN(D9_NAF9), /* share with FLCTL */
+ GPIO_FN(D10_NAF10), GPIO_FN(D11_NAF11), /* share with FLCTL */
+ GPIO_FN(D12_NAF12), GPIO_FN(D13_NAF13), /* share with FLCTL */
+ GPIO_FN(D14_NAF14), GPIO_FN(D15_NAF15), /* share with FLCTL */
+ GPIO_FN(D16), GPIO_FN(D17), GPIO_FN(D18), GPIO_FN(D19),
+ GPIO_FN(D20), GPIO_FN(D21), GPIO_FN(D22), GPIO_FN(D23),
+ GPIO_FN(D24), GPIO_FN(D25), GPIO_FN(D26), GPIO_FN(D27),
+ GPIO_FN(D28), GPIO_FN(D29), GPIO_FN(D30), GPIO_FN(D31),
+
+ GPIO_FN(WE0_FWE), /* share with FLCTL */
+ GPIO_FN(WE1),
+ GPIO_FN(WE2_ICIORD), /* share with PCMCIA */
+ GPIO_FN(WE3_ICIOWR), /* share with PCMCIA */
+ GPIO_FN(CKO), GPIO_FN(BS), GPIO_FN(RDWR),
+ GPIO_FN(RD_FSC), /* share with FLCTL */
+ GPIO_FN(WAIT_PORT177), /* WAIT Port 90/177 */
+ GPIO_FN(WAIT_PORT90),
+
+ GPIO_FN(FCE0), GPIO_FN(FCE1), GPIO_FN(FRB), /* FLCTL */
+
+ /* IRDA */
+ GPIO_FN(IRDA_FIRSEL), GPIO_FN(IRDA_IN), GPIO_FN(IRDA_OUT),
+
+ /* ATAPI */
+ GPIO_FN(IDE_D0), GPIO_FN(IDE_D1), GPIO_FN(IDE_D2),
+ GPIO_FN(IDE_D3), GPIO_FN(IDE_D4), GPIO_FN(IDE_D5),
+ GPIO_FN(IDE_D6), GPIO_FN(IDE_D7), GPIO_FN(IDE_D8),
+ GPIO_FN(IDE_D9), GPIO_FN(IDE_D10), GPIO_FN(IDE_D11),
+ GPIO_FN(IDE_D12), GPIO_FN(IDE_D13), GPIO_FN(IDE_D14),
+ GPIO_FN(IDE_D15), GPIO_FN(IDE_A0), GPIO_FN(IDE_A1),
+ GPIO_FN(IDE_A2), GPIO_FN(IDE_CS0), GPIO_FN(IDE_CS1),
+ GPIO_FN(IDE_IOWR), GPIO_FN(IDE_IORD), GPIO_FN(IDE_IORDY),
+ GPIO_FN(IDE_INT), GPIO_FN(IDE_RST), GPIO_FN(IDE_DIRECTION),
+ GPIO_FN(IDE_EXBUF_ENB), GPIO_FN(IDE_IODACK), GPIO_FN(IDE_IODREQ),
+
+ /* RMII */
+ GPIO_FN(RMII_CRS_DV), GPIO_FN(RMII_RX_ER), GPIO_FN(RMII_RXD0),
+ GPIO_FN(RMII_RXD1), GPIO_FN(RMII_TX_EN), GPIO_FN(RMII_TXD0),
+ GPIO_FN(RMII_MDC), GPIO_FN(RMII_TXD1), GPIO_FN(RMII_MDIO),
+ GPIO_FN(RMII_REF50CK), GPIO_FN(RMII_REF125CK), /* for GMII */
+
+ /* GEther */
+ GPIO_FN(ET_TX_CLK), GPIO_FN(ET_TX_EN), GPIO_FN(ET_ETXD0),
+ GPIO_FN(ET_ETXD1), GPIO_FN(ET_ETXD2), GPIO_FN(ET_ETXD3),
+ GPIO_FN(ET_ETXD4), GPIO_FN(ET_ETXD5), /* for GEther */
+ GPIO_FN(ET_ETXD6), GPIO_FN(ET_ETXD7), /* for GEther */
+ GPIO_FN(ET_COL), GPIO_FN(ET_TX_ER), GPIO_FN(ET_RX_CLK),
+ GPIO_FN(ET_RX_DV), GPIO_FN(ET_ERXD0), GPIO_FN(ET_ERXD1),
+ GPIO_FN(ET_ERXD2), GPIO_FN(ET_ERXD3),
+ GPIO_FN(ET_ERXD4), GPIO_FN(ET_ERXD5), /* for GEther */
+ GPIO_FN(ET_ERXD6), GPIO_FN(ET_ERXD7), /* for GEther */
+ GPIO_FN(ET_RX_ER), GPIO_FN(ET_CRS), GPIO_FN(ET_MDC),
+ GPIO_FN(ET_MDIO), GPIO_FN(ET_LINK), GPIO_FN(ET_PHY_INT),
+ GPIO_FN(ET_WOL), GPIO_FN(ET_GTX_CLK),
+
+ /* DMA0 */
+ GPIO_FN(DREQ0), GPIO_FN(DACK0),
+
+ /* DMA1 */
+ GPIO_FN(DREQ1), GPIO_FN(DACK1),
+
+ /* SYSC */
+ GPIO_FN(RESETOUTS),
+
+ /* IRREM */
+ GPIO_FN(IROUT),
+
+ /* LCDC */
+ GPIO_FN(LCDC0_SELECT),
+ GPIO_FN(LCDC1_SELECT),
+
+ /* SDENC */
+ GPIO_FN(SDENC_CPG),
+ GPIO_FN(SDENC_DV_CLKI),
+
+ /* SYSC */
+ GPIO_FN(RESETP_PULLUP),
+ GPIO_FN(RESETP_PLAIN),
+
+ /* DEBUG */
+ GPIO_FN(EDEBGREQ_PULLDOWN),
+ GPIO_FN(EDEBGREQ_PULLUP),
+
+ GPIO_FN(TRACEAUD_FROM_VIO),
+ GPIO_FN(TRACEAUD_FROM_LCDC0),
+ GPIO_FN(TRACEAUD_FROM_MEMC),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xe6050000), /* PORT0CR */
+ PORTCR(1, 0xe6050001), /* PORT1CR */
+ PORTCR(2, 0xe6050002), /* PORT2CR */
+ PORTCR(3, 0xe6050003), /* PORT3CR */
+ PORTCR(4, 0xe6050004), /* PORT4CR */
+ PORTCR(5, 0xe6050005), /* PORT5CR */
+ PORTCR(6, 0xe6050006), /* PORT6CR */
+ PORTCR(7, 0xe6050007), /* PORT7CR */
+ PORTCR(8, 0xe6050008), /* PORT8CR */
+ PORTCR(9, 0xe6050009), /* PORT9CR */
+ PORTCR(10, 0xe605000a), /* PORT10CR */
+ PORTCR(11, 0xe605000b), /* PORT11CR */
+ PORTCR(12, 0xe605000c), /* PORT12CR */
+ PORTCR(13, 0xe605000d), /* PORT13CR */
+ PORTCR(14, 0xe605000e), /* PORT14CR */
+ PORTCR(15, 0xe605000f), /* PORT15CR */
+ PORTCR(16, 0xe6050010), /* PORT16CR */
+ PORTCR(17, 0xe6050011), /* PORT17CR */
+ PORTCR(18, 0xe6050012), /* PORT18CR */
+ PORTCR(19, 0xe6050013), /* PORT19CR */
+ PORTCR(20, 0xe6050014), /* PORT20CR */
+ PORTCR(21, 0xe6050015), /* PORT21CR */
+ PORTCR(22, 0xe6050016), /* PORT22CR */
+ PORTCR(23, 0xe6050017), /* PORT23CR */
+ PORTCR(24, 0xe6050018), /* PORT24CR */
+ PORTCR(25, 0xe6050019), /* PORT25CR */
+ PORTCR(26, 0xe605001a), /* PORT26CR */
+ PORTCR(27, 0xe605001b), /* PORT27CR */
+ PORTCR(28, 0xe605001c), /* PORT28CR */
+ PORTCR(29, 0xe605001d), /* PORT29CR */
+ PORTCR(30, 0xe605001e), /* PORT30CR */
+ PORTCR(31, 0xe605001f), /* PORT31CR */
+ PORTCR(32, 0xe6050020), /* PORT32CR */
+ PORTCR(33, 0xe6050021), /* PORT33CR */
+ PORTCR(34, 0xe6050022), /* PORT34CR */
+ PORTCR(35, 0xe6050023), /* PORT35CR */
+ PORTCR(36, 0xe6050024), /* PORT36CR */
+ PORTCR(37, 0xe6050025), /* PORT37CR */
+ PORTCR(38, 0xe6050026), /* PORT38CR */
+ PORTCR(39, 0xe6050027), /* PORT39CR */
+ PORTCR(40, 0xe6050028), /* PORT40CR */
+ PORTCR(41, 0xe6050029), /* PORT41CR */
+ PORTCR(42, 0xe605002a), /* PORT42CR */
+ PORTCR(43, 0xe605002b), /* PORT43CR */
+ PORTCR(44, 0xe605002c), /* PORT44CR */
+ PORTCR(45, 0xe605002d), /* PORT45CR */
+ PORTCR(46, 0xe605002e), /* PORT46CR */
+ PORTCR(47, 0xe605002f), /* PORT47CR */
+ PORTCR(48, 0xe6050030), /* PORT48CR */
+ PORTCR(49, 0xe6050031), /* PORT49CR */
+ PORTCR(50, 0xe6050032), /* PORT50CR */
+ PORTCR(51, 0xe6050033), /* PORT51CR */
+ PORTCR(52, 0xe6050034), /* PORT52CR */
+ PORTCR(53, 0xe6050035), /* PORT53CR */
+ PORTCR(54, 0xe6050036), /* PORT54CR */
+ PORTCR(55, 0xe6050037), /* PORT55CR */
+ PORTCR(56, 0xe6050038), /* PORT56CR */
+ PORTCR(57, 0xe6050039), /* PORT57CR */
+ PORTCR(58, 0xe605003a), /* PORT58CR */
+ PORTCR(59, 0xe605003b), /* PORT59CR */
+ PORTCR(60, 0xe605003c), /* PORT60CR */
+ PORTCR(61, 0xe605003d), /* PORT61CR */
+ PORTCR(62, 0xe605003e), /* PORT62CR */
+ PORTCR(63, 0xe605003f), /* PORT63CR */
+ PORTCR(64, 0xe6050040), /* PORT64CR */
+ PORTCR(65, 0xe6050041), /* PORT65CR */
+ PORTCR(66, 0xe6050042), /* PORT66CR */
+ PORTCR(67, 0xe6050043), /* PORT67CR */
+ PORTCR(68, 0xe6050044), /* PORT68CR */
+ PORTCR(69, 0xe6050045), /* PORT69CR */
+ PORTCR(70, 0xe6050046), /* PORT70CR */
+ PORTCR(71, 0xe6050047), /* PORT71CR */
+ PORTCR(72, 0xe6050048), /* PORT72CR */
+ PORTCR(73, 0xe6050049), /* PORT73CR */
+ PORTCR(74, 0xe605004a), /* PORT74CR */
+ PORTCR(75, 0xe605004b), /* PORT75CR */
+ PORTCR(76, 0xe605004c), /* PORT76CR */
+ PORTCR(77, 0xe605004d), /* PORT77CR */
+ PORTCR(78, 0xe605004e), /* PORT78CR */
+ PORTCR(79, 0xe605004f), /* PORT79CR */
+ PORTCR(80, 0xe6050050), /* PORT80CR */
+ PORTCR(81, 0xe6050051), /* PORT81CR */
+ PORTCR(82, 0xe6050052), /* PORT82CR */
+ PORTCR(83, 0xe6050053), /* PORT83CR */
+
+ PORTCR(84, 0xe6051054), /* PORT84CR */
+ PORTCR(85, 0xe6051055), /* PORT85CR */
+ PORTCR(86, 0xe6051056), /* PORT86CR */
+ PORTCR(87, 0xe6051057), /* PORT87CR */
+ PORTCR(88, 0xe6051058), /* PORT88CR */
+ PORTCR(89, 0xe6051059), /* PORT89CR */
+ PORTCR(90, 0xe605105a), /* PORT90CR */
+ PORTCR(91, 0xe605105b), /* PORT91CR */
+ PORTCR(92, 0xe605105c), /* PORT92CR */
+ PORTCR(93, 0xe605105d), /* PORT93CR */
+ PORTCR(94, 0xe605105e), /* PORT94CR */
+ PORTCR(95, 0xe605105f), /* PORT95CR */
+ PORTCR(96, 0xe6051060), /* PORT96CR */
+ PORTCR(97, 0xe6051061), /* PORT97CR */
+ PORTCR(98, 0xe6051062), /* PORT98CR */
+ PORTCR(99, 0xe6051063), /* PORT99CR */
+ PORTCR(100, 0xe6051064), /* PORT100CR */
+ PORTCR(101, 0xe6051065), /* PORT101CR */
+ PORTCR(102, 0xe6051066), /* PORT102CR */
+ PORTCR(103, 0xe6051067), /* PORT103CR */
+ PORTCR(104, 0xe6051068), /* PORT104CR */
+ PORTCR(105, 0xe6051069), /* PORT105CR */
+ PORTCR(106, 0xe605106a), /* PORT106CR */
+ PORTCR(107, 0xe605106b), /* PORT107CR */
+ PORTCR(108, 0xe605106c), /* PORT108CR */
+ PORTCR(109, 0xe605106d), /* PORT109CR */
+ PORTCR(110, 0xe605106e), /* PORT110CR */
+ PORTCR(111, 0xe605106f), /* PORT111CR */
+ PORTCR(112, 0xe6051070), /* PORT112CR */
+ PORTCR(113, 0xe6051071), /* PORT113CR */
+ PORTCR(114, 0xe6051072), /* PORT114CR */
+
+ PORTCR(115, 0xe6052073), /* PORT115CR */
+ PORTCR(116, 0xe6052074), /* PORT116CR */
+ PORTCR(117, 0xe6052075), /* PORT117CR */
+ PORTCR(118, 0xe6052076), /* PORT118CR */
+ PORTCR(119, 0xe6052077), /* PORT119CR */
+ PORTCR(120, 0xe6052078), /* PORT120CR */
+ PORTCR(121, 0xe6052079), /* PORT121CR */
+ PORTCR(122, 0xe605207a), /* PORT122CR */
+ PORTCR(123, 0xe605207b), /* PORT123CR */
+ PORTCR(124, 0xe605207c), /* PORT124CR */
+ PORTCR(125, 0xe605207d), /* PORT125CR */
+ PORTCR(126, 0xe605207e), /* PORT126CR */
+ PORTCR(127, 0xe605207f), /* PORT127CR */
+ PORTCR(128, 0xe6052080), /* PORT128CR */
+ PORTCR(129, 0xe6052081), /* PORT129CR */
+ PORTCR(130, 0xe6052082), /* PORT130CR */
+ PORTCR(131, 0xe6052083), /* PORT131CR */
+ PORTCR(132, 0xe6052084), /* PORT132CR */
+ PORTCR(133, 0xe6052085), /* PORT133CR */
+ PORTCR(134, 0xe6052086), /* PORT134CR */
+ PORTCR(135, 0xe6052087), /* PORT135CR */
+ PORTCR(136, 0xe6052088), /* PORT136CR */
+ PORTCR(137, 0xe6052089), /* PORT137CR */
+ PORTCR(138, 0xe605208a), /* PORT138CR */
+ PORTCR(139, 0xe605208b), /* PORT139CR */
+ PORTCR(140, 0xe605208c), /* PORT140CR */
+ PORTCR(141, 0xe605208d), /* PORT141CR */
+ PORTCR(142, 0xe605208e), /* PORT142CR */
+ PORTCR(143, 0xe605208f), /* PORT143CR */
+ PORTCR(144, 0xe6052090), /* PORT144CR */
+ PORTCR(145, 0xe6052091), /* PORT145CR */
+ PORTCR(146, 0xe6052092), /* PORT146CR */
+ PORTCR(147, 0xe6052093), /* PORT147CR */
+ PORTCR(148, 0xe6052094), /* PORT148CR */
+ PORTCR(149, 0xe6052095), /* PORT149CR */
+ PORTCR(150, 0xe6052096), /* PORT150CR */
+ PORTCR(151, 0xe6052097), /* PORT151CR */
+ PORTCR(152, 0xe6052098), /* PORT152CR */
+ PORTCR(153, 0xe6052099), /* PORT153CR */
+ PORTCR(154, 0xe605209a), /* PORT154CR */
+ PORTCR(155, 0xe605209b), /* PORT155CR */
+ PORTCR(156, 0xe605209c), /* PORT156CR */
+ PORTCR(157, 0xe605209d), /* PORT157CR */
+ PORTCR(158, 0xe605209e), /* PORT158CR */
+ PORTCR(159, 0xe605209f), /* PORT159CR */
+ PORTCR(160, 0xe60520a0), /* PORT160CR */
+ PORTCR(161, 0xe60520a1), /* PORT161CR */
+ PORTCR(162, 0xe60520a2), /* PORT162CR */
+ PORTCR(163, 0xe60520a3), /* PORT163CR */
+ PORTCR(164, 0xe60520a4), /* PORT164CR */
+ PORTCR(165, 0xe60520a5), /* PORT165CR */
+ PORTCR(166, 0xe60520a6), /* PORT166CR */
+ PORTCR(167, 0xe60520a7), /* PORT167CR */
+ PORTCR(168, 0xe60520a8), /* PORT168CR */
+ PORTCR(169, 0xe60520a9), /* PORT169CR */
+ PORTCR(170, 0xe60520aa), /* PORT170CR */
+ PORTCR(171, 0xe60520ab), /* PORT171CR */
+ PORTCR(172, 0xe60520ac), /* PORT172CR */
+ PORTCR(173, 0xe60520ad), /* PORT173CR */
+ PORTCR(174, 0xe60520ae), /* PORT174CR */
+ PORTCR(175, 0xe60520af), /* PORT175CR */
+ PORTCR(176, 0xe60520b0), /* PORT176CR */
+ PORTCR(177, 0xe60520b1), /* PORT177CR */
+ PORTCR(178, 0xe60520b2), /* PORT178CR */
+ PORTCR(179, 0xe60520b3), /* PORT179CR */
+ PORTCR(180, 0xe60520b4), /* PORT180CR */
+ PORTCR(181, 0xe60520b5), /* PORT181CR */
+ PORTCR(182, 0xe60520b6), /* PORT182CR */
+ PORTCR(183, 0xe60520b7), /* PORT183CR */
+ PORTCR(184, 0xe60520b8), /* PORT184CR */
+ PORTCR(185, 0xe60520b9), /* PORT185CR */
+ PORTCR(186, 0xe60520ba), /* PORT186CR */
+ PORTCR(187, 0xe60520bb), /* PORT187CR */
+ PORTCR(188, 0xe60520bc), /* PORT188CR */
+ PORTCR(189, 0xe60520bd), /* PORT189CR */
+ PORTCR(190, 0xe60520be), /* PORT190CR */
+ PORTCR(191, 0xe60520bf), /* PORT191CR */
+ PORTCR(192, 0xe60520c0), /* PORT192CR */
+ PORTCR(193, 0xe60520c1), /* PORT193CR */
+ PORTCR(194, 0xe60520c2), /* PORT194CR */
+ PORTCR(195, 0xe60520c3), /* PORT195CR */
+ PORTCR(196, 0xe60520c4), /* PORT196CR */
+ PORTCR(197, 0xe60520c5), /* PORT197CR */
+ PORTCR(198, 0xe60520c6), /* PORT198CR */
+ PORTCR(199, 0xe60520c7), /* PORT199CR */
+ PORTCR(200, 0xe60520c8), /* PORT200CR */
+ PORTCR(201, 0xe60520c9), /* PORT201CR */
+ PORTCR(202, 0xe60520ca), /* PORT202CR */
+ PORTCR(203, 0xe60520cb), /* PORT203CR */
+ PORTCR(204, 0xe60520cc), /* PORT204CR */
+ PORTCR(205, 0xe60520cd), /* PORT205CR */
+ PORTCR(206, 0xe60520ce), /* PORT206CR */
+ PORTCR(207, 0xe60520cf), /* PORT207CR */
+ PORTCR(208, 0xe60520d0), /* PORT208CR */
+ PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+ PORTCR(210, 0xe60530d2), /* PORT210CR */
+ PORTCR(211, 0xe60530d3), /* PORT211CR */
+
+ { PINMUX_CFG_REG("MSEL1CR", 0xe605800c, 32, 1) {
+ MSEL1CR_31_0, MSEL1CR_31_1,
+ MSEL1CR_30_0, MSEL1CR_30_1,
+ MSEL1CR_29_0, MSEL1CR_29_1,
+ MSEL1CR_28_0, MSEL1CR_28_1,
+ MSEL1CR_27_0, MSEL1CR_27_1,
+ MSEL1CR_26_0, MSEL1CR_26_1,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL1CR_16_0, MSEL1CR_16_1,
+ MSEL1CR_15_0, MSEL1CR_15_1,
+ MSEL1CR_14_0, MSEL1CR_14_1,
+ MSEL1CR_13_0, MSEL1CR_13_1,
+ MSEL1CR_12_0, MSEL1CR_12_1,
+ 0, 0, 0, 0,
+ MSEL1CR_9_0, MSEL1CR_9_1,
+ 0, 0,
+ MSEL1CR_7_0, MSEL1CR_7_1,
+ MSEL1CR_6_0, MSEL1CR_6_1,
+ MSEL1CR_5_0, MSEL1CR_5_1,
+ MSEL1CR_4_0, MSEL1CR_4_1,
+ MSEL1CR_3_0, MSEL1CR_3_1,
+ MSEL1CR_2_0, MSEL1CR_2_1,
+ 0, 0,
+ MSEL1CR_0_0, MSEL1CR_0_1,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL3CR", 0xE6058020, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL3CR_15_0, MSEL3CR_15_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL3CR_6_0, MSEL3CR_6_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL4CR", 0xE6058024, 32, 1) {
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL4CR_19_0, MSEL4CR_19_1,
+ MSEL4CR_18_0, MSEL4CR_18_1,
+ 0, 0, 0, 0,
+ MSEL4CR_15_0, MSEL4CR_15_1,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ MSEL4CR_10_0, MSEL4CR_10_1,
+ 0, 0, 0, 0, 0, 0,
+ MSEL4CR_6_0, MSEL4CR_6_1,
+ 0, 0,
+ MSEL4CR_4_0, MSEL4CR_4_1,
+ 0, 0, 0, 0,
+ MSEL4CR_1_0, MSEL4CR_1_1,
+ 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL5CR", 0xE6058028, 32, 1) {
+ MSEL5CR_31_0, MSEL5CR_31_1,
+ MSEL5CR_30_0, MSEL5CR_30_1,
+ MSEL5CR_29_0, MSEL5CR_29_1,
+ 0, 0,
+ MSEL5CR_27_0, MSEL5CR_27_1,
+ 0, 0,
+ MSEL5CR_25_0, MSEL5CR_25_1,
+ 0, 0,
+ MSEL5CR_23_0, MSEL5CR_23_1,
+ 0, 0,
+ MSEL5CR_21_0, MSEL5CR_21_1,
+ 0, 0,
+ MSEL5CR_19_0, MSEL5CR_19_1,
+ 0, 0,
+ MSEL5CR_17_0, MSEL5CR_17_1,
+ 0, 0,
+ MSEL5CR_15_0, MSEL5CR_15_1,
+ MSEL5CR_14_0, MSEL5CR_14_1,
+ MSEL5CR_13_0, MSEL5CR_13_1,
+ MSEL5CR_12_0, MSEL5CR_12_1,
+ MSEL5CR_11_0, MSEL5CR_11_1,
+ MSEL5CR_10_0, MSEL5CR_10_1,
+ 0, 0,
+ MSEL5CR_8_0, MSEL5CR_8_1,
+ MSEL5CR_7_0, MSEL5CR_7_1,
+ MSEL5CR_6_0, MSEL5CR_6_1,
+ MSEL5CR_5_0, MSEL5CR_5_1,
+ MSEL5CR_4_0, MSEL5CR_4_1,
+ MSEL5CR_3_0, MSEL5CR_3_1,
+ MSEL5CR_2_0, MSEL5CR_2_1,
+ 0, 0,
+ MSEL5CR_0_0, MSEL5CR_0_1,
+ }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054800, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL063_032DR", 0xe6054804, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+ },
+ { PINMUX_DATA_REG("PORTL095_064DR", 0xe6054808, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055808, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PORTD127_096DR", 0xe605580c, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR127_096DR", 0xe605680C, 32) {
+ PORT127_DATA, PORT126_DATA, PORT125_DATA, PORT124_DATA,
+ PORT123_DATA, PORT122_DATA, PORT121_DATA, PORT120_DATA,
+ PORT119_DATA, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056810, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056814, 32) {
+ PORT191_DATA, PORT190_DATA, PORT189_DATA, PORT188_DATA,
+ PORT187_DATA, PORT186_DATA, PORT185_DATA, PORT184_DATA,
+ PORT183_DATA, PORT182_DATA, PORT181_DATA, PORT180_DATA,
+ PORT179_DATA, PORT178_DATA, PORT177_DATA, PORT176_DATA,
+ PORT175_DATA, PORT174_DATA, PORT173_DATA, PORT172_DATA,
+ PORT171_DATA, PORT170_DATA, PORT169_DATA, PORT168_DATA,
+ PORT167_DATA, PORT166_DATA, PORT165_DATA, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR223_192DR", 0xe6056818, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, PORT209_DATA, PORT208_DATA,
+ PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+ PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+ PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+ PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU223_192DR", 0xe6057818, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ PORT211_DATA, PORT210_DATA, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0 }
+ },
+ { },
+};
+
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(evt2irq(0x0200), PORT2_FN0, PORT13_FN0), /* IRQ0A */
+ PINMUX_IRQ(evt2irq(0x0220), PORT20_FN0), /* IRQ1A */
+ PINMUX_IRQ(evt2irq(0x0240), PORT11_FN0, PORT12_FN0), /* IRQ2A */
+ PINMUX_IRQ(evt2irq(0x0260), PORT10_FN0, PORT14_FN0), /* IRQ3A */
+ PINMUX_IRQ(evt2irq(0x0280), PORT15_FN0, PORT172_FN0), /* IRQ4A */
+ PINMUX_IRQ(evt2irq(0x02A0), PORT0_FN0, PORT1_FN0), /* IRQ5A */
+ PINMUX_IRQ(evt2irq(0x02C0), PORT121_FN0, PORT173_FN0), /* IRQ6A */
+ PINMUX_IRQ(evt2irq(0x02E0), PORT120_FN0, PORT209_FN0), /* IRQ7A */
+ PINMUX_IRQ(evt2irq(0x0300), PORT119_FN0), /* IRQ8A */
+ PINMUX_IRQ(evt2irq(0x0320), PORT118_FN0, PORT210_FN0), /* IRQ9A */
+ PINMUX_IRQ(evt2irq(0x0340), PORT19_FN0), /* IRQ10A */
+ PINMUX_IRQ(evt2irq(0x0360), PORT104_FN0), /* IRQ11A */
+ PINMUX_IRQ(evt2irq(0x0380), PORT42_FN0, PORT97_FN0), /* IRQ12A */
+ PINMUX_IRQ(evt2irq(0x03A0), PORT64_FN0, PORT98_FN0), /* IRQ13A */
+ PINMUX_IRQ(evt2irq(0x03C0), PORT63_FN0, PORT99_FN0), /* IRQ14A */
+ PINMUX_IRQ(evt2irq(0x03E0), PORT62_FN0, PORT100_FN0), /* IRQ15A */
+ PINMUX_IRQ(evt2irq(0x3200), PORT68_FN0, PORT211_FN0), /* IRQ16A */
+ PINMUX_IRQ(evt2irq(0x3220), PORT69_FN0), /* IRQ17A */
+ PINMUX_IRQ(evt2irq(0x3240), PORT70_FN0), /* IRQ18A */
+ PINMUX_IRQ(evt2irq(0x3260), PORT71_FN0), /* IRQ19A */
+ PINMUX_IRQ(evt2irq(0x3280), PORT67_FN0), /* IRQ20A */
+ PINMUX_IRQ(evt2irq(0x32A0), PORT202_FN0), /* IRQ21A */
+ PINMUX_IRQ(evt2irq(0x32C0), PORT95_FN0), /* IRQ22A */
+ PINMUX_IRQ(evt2irq(0x32E0), PORT96_FN0), /* IRQ23A */
+ PINMUX_IRQ(evt2irq(0x3300), PORT180_FN0), /* IRQ24A */
+ PINMUX_IRQ(evt2irq(0x3320), PORT38_FN0), /* IRQ25A */
+ PINMUX_IRQ(evt2irq(0x3340), PORT58_FN0, PORT81_FN0), /* IRQ26A */
+ PINMUX_IRQ(evt2irq(0x3360), PORT57_FN0, PORT168_FN0), /* IRQ27A */
+ PINMUX_IRQ(evt2irq(0x3380), PORT56_FN0, PORT169_FN0), /* IRQ28A */
+ PINMUX_IRQ(evt2irq(0x33A0), PORT50_FN0, PORT170_FN0), /* IRQ29A */
+ PINMUX_IRQ(evt2irq(0x33C0), PORT49_FN0, PORT171_FN0), /* IRQ30A */
+ PINMUX_IRQ(evt2irq(0x33E0), PORT41_FN0, PORT167_FN0), /* IRQ31A */
+};
+
+static struct pinmux_info r8a7740_pinmux_info = {
+ .name = "r8a7740_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN,
+ PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN,
+ PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN,
+ PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN,
+ PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN,
+ PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN,
+ PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN,
+ PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_TRACEAUD_FROM_MEMC,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
+};
+
+void r8a7740_pinmux_init(void)
+{
+ register_pinmux(&r8a7740_pinmux_info);
+}
--- /dev/null
+/*
+ * sh73a0 processor support - PFC hardware block
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ * Copyright (C) 2010 NISHIMOTO Hiroki
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of the
+ * License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <common.h>
+#include <sh_pfc.h>
+#include <asm/arch/sh73a0-gpio.h>
+
+#define CPU_ALL_PORT(fn, pfx, sfx) \
+ PORT_10(fn, pfx, sfx), PORT_10(fn, pfx##1, sfx), \
+ PORT_10(fn, pfx##2, sfx), PORT_10(fn, pfx##3, sfx), \
+ PORT_10(fn, pfx##4, sfx), PORT_10(fn, pfx##5, sfx), \
+ PORT_10(fn, pfx##6, sfx), PORT_10(fn, pfx##7, sfx), \
+ PORT_10(fn, pfx##8, sfx), PORT_10(fn, pfx##9, sfx), \
+ PORT_10(fn, pfx##10, sfx), \
+ PORT_1(fn, pfx##110, sfx), PORT_1(fn, pfx##111, sfx), \
+ PORT_1(fn, pfx##112, sfx), PORT_1(fn, pfx##113, sfx), \
+ PORT_1(fn, pfx##114, sfx), PORT_1(fn, pfx##115, sfx), \
+ PORT_1(fn, pfx##116, sfx), PORT_1(fn, pfx##117, sfx), \
+ PORT_1(fn, pfx##118, sfx), \
+ PORT_1(fn, pfx##128, sfx), PORT_1(fn, pfx##129, sfx), \
+ PORT_10(fn, pfx##13, sfx), PORT_10(fn, pfx##14, sfx), \
+ PORT_10(fn, pfx##15, sfx), \
+ PORT_1(fn, pfx##160, sfx), PORT_1(fn, pfx##161, sfx), \
+ PORT_1(fn, pfx##162, sfx), PORT_1(fn, pfx##163, sfx), \
+ PORT_1(fn, pfx##164, sfx), \
+ PORT_1(fn, pfx##192, sfx), PORT_1(fn, pfx##193, sfx), \
+ PORT_1(fn, pfx##194, sfx), PORT_1(fn, pfx##195, sfx), \
+ PORT_1(fn, pfx##196, sfx), PORT_1(fn, pfx##197, sfx), \
+ PORT_1(fn, pfx##198, sfx), PORT_1(fn, pfx##199, sfx), \
+ PORT_10(fn, pfx##20, sfx), PORT_10(fn, pfx##21, sfx), \
+ PORT_10(fn, pfx##22, sfx), PORT_10(fn, pfx##23, sfx), \
+ PORT_10(fn, pfx##24, sfx), PORT_10(fn, pfx##25, sfx), \
+ PORT_10(fn, pfx##26, sfx), PORT_10(fn, pfx##27, sfx), \
+ PORT_1(fn, pfx##280, sfx), PORT_1(fn, pfx##281, sfx), \
+ PORT_1(fn, pfx##282, sfx), \
+ PORT_1(fn, pfx##288, sfx), PORT_1(fn, pfx##289, sfx), \
+ PORT_10(fn, pfx##29, sfx), PORT_10(fn, pfx##30, sfx)
+
+enum {
+ PINMUX_RESERVED = 0,
+
+ PINMUX_DATA_BEGIN,
+ PORT_ALL(DATA), /* PORT0_DATA -> PORT309_DATA */
+ PINMUX_DATA_END,
+
+ PINMUX_INPUT_BEGIN,
+ PORT_ALL(IN), /* PORT0_IN -> PORT309_IN */
+ PINMUX_INPUT_END,
+
+ PINMUX_INPUT_PULLUP_BEGIN,
+ PORT_ALL(IN_PU), /* PORT0_IN_PU -> PORT309_IN_PU */
+ PINMUX_INPUT_PULLUP_END,
+
+ PINMUX_INPUT_PULLDOWN_BEGIN,
+ PORT_ALL(IN_PD), /* PORT0_IN_PD -> PORT309_IN_PD */
+ PINMUX_INPUT_PULLDOWN_END,
+
+ PINMUX_OUTPUT_BEGIN,
+ PORT_ALL(OUT), /* PORT0_OUT -> PORT309_OUT */
+ PINMUX_OUTPUT_END,
+
+ PINMUX_FUNCTION_BEGIN,
+ PORT_ALL(FN_IN), /* PORT0_FN_IN -> PORT309_FN_IN */
+ PORT_ALL(FN_OUT), /* PORT0_FN_OUT -> PORT309_FN_OUT */
+ PORT_ALL(FN0), /* PORT0_FN0 -> PORT309_FN0 */
+ PORT_ALL(FN1), /* PORT0_FN1 -> PORT309_FN1 */
+ PORT_ALL(FN2), /* PORT0_FN2 -> PORT309_FN2 */
+ PORT_ALL(FN3), /* PORT0_FN3 -> PORT309_FN3 */
+ PORT_ALL(FN4), /* PORT0_FN4 -> PORT309_FN4 */
+ PORT_ALL(FN5), /* PORT0_FN5 -> PORT309_FN5 */
+ PORT_ALL(FN6), /* PORT0_FN6 -> PORT309_FN6 */
+ PORT_ALL(FN7), /* PORT0_FN7 -> PORT309_FN7 */
+
+ MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+ MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+ MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+ MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+ MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+ MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+ MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+ MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+ MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+ MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+ MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+ MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+ MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+ MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+ MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+ MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+ MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+ MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+ MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+ MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+ MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+ MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+ MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+ MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+ MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+ MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+ MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+ MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+ MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+ MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+ MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+ MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+ MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+ MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+ MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+ MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+ MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+ MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+ MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+ MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+ MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+ PINMUX_FUNCTION_END,
+
+ PINMUX_MARK_BEGIN,
+ /* Hardware manual Table 25-1 (Function 0-7) */
+ VBUS_0_MARK,
+ GPI0_MARK,
+ GPI1_MARK,
+ GPI2_MARK,
+ GPI3_MARK,
+ GPI4_MARK,
+ GPI5_MARK,
+ GPI6_MARK,
+ GPI7_MARK,
+ SCIFA7_RXD_MARK,
+ SCIFA7_CTS__MARK,
+ GPO7_MARK, MFG0_OUT2_MARK,
+ GPO6_MARK, MFG1_OUT2_MARK,
+ GPO5_MARK, SCIFA0_SCK_MARK, FSICOSLDT3_MARK, PORT16_VIO_CKOR_MARK,
+ SCIFA0_TXD_MARK,
+ SCIFA7_TXD_MARK,
+ SCIFA7_RTS__MARK, PORT19_VIO_CKO2_MARK,
+ GPO0_MARK,
+ GPO1_MARK,
+ GPO2_MARK, STATUS0_MARK,
+ GPO3_MARK, STATUS1_MARK,
+ GPO4_MARK, STATUS2_MARK,
+ VINT_MARK,
+ TCKON_MARK,
+ XDVFS1_MARK, PORT27_I2C_SCL2_MARK, PORT27_I2C_SCL3_MARK, \
+ MFG0_OUT1_MARK, PORT27_IROUT_MARK,
+ XDVFS2_MARK, PORT28_I2C_SDA2_MARK, PORT28_I2C_SDA3_MARK, \
+ PORT28_TPU1TO1_MARK,
+ SIM_RST_MARK, PORT29_TPU1TO1_MARK,
+ SIM_CLK_MARK, PORT30_VIO_CKOR_MARK,
+ SIM_D_MARK, PORT31_IROUT_MARK,
+ SCIFA4_TXD_MARK,
+ SCIFA4_RXD_MARK, XWUP_MARK,
+ SCIFA4_RTS__MARK,
+ SCIFA4_CTS__MARK,
+ FSIBOBT_MARK, FSIBIBT_MARK,
+ FSIBOLR_MARK, FSIBILR_MARK,
+ FSIBOSLD_MARK,
+ FSIBISLD_MARK,
+ VACK_MARK,
+ XTAL1L_MARK,
+ SCIFA0_RTS__MARK, FSICOSLDT2_MARK,
+ SCIFA0_RXD_MARK,
+ SCIFA0_CTS__MARK, FSICOSLDT1_MARK,
+ FSICOBT_MARK, FSICIBT_MARK, FSIDOBT_MARK, FSIDIBT_MARK,
+ FSICOLR_MARK, FSICILR_MARK, FSIDOLR_MARK, FSIDILR_MARK,
+ FSICOSLD_MARK, PORT47_FSICSPDIF_MARK,
+ FSICISLD_MARK, FSIDISLD_MARK,
+ FSIACK_MARK, PORT49_IRDA_OUT_MARK, PORT49_IROUT_MARK, FSIAOMC_MARK,
+ FSIAOLR_MARK, BBIF2_TSYNC2_MARK, TPU2TO2_MARK, FSIAILR_MARK,
+
+ FSIAOBT_MARK, BBIF2_TSCK2_MARK, TPU2TO3_MARK, FSIAIBT_MARK,
+ FSIAOSLD_MARK, BBIF2_TXD2_MARK,
+ FSIASPDIF_MARK, PORT53_IRDA_IN_MARK, TPU3TO3_MARK, FSIBSPDIF_MARK, \
+ PORT53_FSICSPDIF_MARK,
+ FSIBCK_MARK, PORT54_IRDA_FIRSEL_MARK, TPU3TO2_MARK, FSIBOMC_MARK, \
+ FSICCK_MARK, FSICOMC_MARK,
+ FSIAISLD_MARK, TPU0TO0_MARK,
+ A0_MARK, BS__MARK,
+ A12_MARK, PORT58_KEYOUT7_MARK, TPU4TO2_MARK,
+ A13_MARK, PORT59_KEYOUT6_MARK, TPU0TO1_MARK,
+ A14_MARK, KEYOUT5_MARK,
+ A15_MARK, KEYOUT4_MARK,
+ A16_MARK, KEYOUT3_MARK, MSIOF0_SS1_MARK,
+ A17_MARK, KEYOUT2_MARK, MSIOF0_TSYNC_MARK,
+ A18_MARK, KEYOUT1_MARK, MSIOF0_TSCK_MARK,
+ A19_MARK, KEYOUT0_MARK, MSIOF0_TXD_MARK,
+ A20_MARK, KEYIN0_MARK, MSIOF0_RSCK_MARK,
+ A21_MARK, KEYIN1_MARK, MSIOF0_RSYNC_MARK,
+ A22_MARK, KEYIN2_MARK, MSIOF0_MCK0_MARK,
+ A23_MARK, KEYIN3_MARK, MSIOF0_MCK1_MARK,
+ A24_MARK, KEYIN4_MARK, MSIOF0_RXD_MARK,
+ A25_MARK, KEYIN5_MARK, MSIOF0_SS2_MARK,
+ A26_MARK, KEYIN6_MARK,
+ KEYIN7_MARK,
+ D0_NAF0_MARK,
+ D1_NAF1_MARK,
+ D2_NAF2_MARK,
+ D3_NAF3_MARK,
+ D4_NAF4_MARK,
+ D5_NAF5_MARK,
+ D6_NAF6_MARK,
+ D7_NAF7_MARK,
+ D8_NAF8_MARK,
+ D9_NAF9_MARK,
+ D10_NAF10_MARK,
+ D11_NAF11_MARK,
+ D12_NAF12_MARK,
+ D13_NAF13_MARK,
+ D14_NAF14_MARK,
+ D15_NAF15_MARK,
+ CS4__MARK,
+ CS5A__MARK, PORT91_RDWR_MARK,
+ CS5B__MARK, FCE1__MARK,
+ CS6B__MARK, DACK0_MARK,
+ FCE0__MARK, CS6A__MARK,
+ WAIT__MARK, DREQ0_MARK,
+ RD__FSC_MARK,
+ WE0__FWE_MARK, RDWR_FWE_MARK,
+ WE1__MARK,
+ FRB_MARK,
+ CKO_MARK,
+ NBRSTOUT__MARK,
+ NBRST__MARK,
+ BBIF2_TXD_MARK,
+ BBIF2_RXD_MARK,
+ BBIF2_SYNC_MARK,
+ BBIF2_SCK_MARK,
+ SCIFA3_CTS__MARK, MFG3_IN2_MARK,
+ SCIFA3_RXD_MARK, MFG3_IN1_MARK,
+ BBIF1_SS2_MARK, SCIFA3_RTS__MARK, MFG3_OUT1_MARK,
+ SCIFA3_TXD_MARK,
+ HSI_RX_DATA_MARK, BBIF1_RXD_MARK,
+ HSI_TX_WAKE_MARK, BBIF1_TSCK_MARK,
+ HSI_TX_DATA_MARK, BBIF1_TSYNC_MARK,
+ HSI_TX_READY_MARK, BBIF1_TXD_MARK,
+ HSI_RX_READY_MARK, BBIF1_RSCK_MARK, PORT115_I2C_SCL2_MARK, \
+ PORT115_I2C_SCL3_MARK,
+ HSI_RX_WAKE_MARK, BBIF1_RSYNC_MARK, PORT116_I2C_SDA2_MARK, \
+ PORT116_I2C_SDA3_MARK,
+ HSI_RX_FLAG_MARK, BBIF1_SS1_MARK, BBIF1_FLOW_MARK,
+ HSI_TX_FLAG_MARK,
+ VIO_VD_MARK, PORT128_LCD2VSYN_MARK, VIO2_VD_MARK, LCD2D0_MARK,
+
+ VIO_HD_MARK, PORT129_LCD2HSYN_MARK, PORT129_LCD2CS__MARK, \
+ VIO2_HD_MARK, LCD2D1_MARK,
+ VIO_D0_MARK, PORT130_MSIOF2_RXD_MARK, LCD2D10_MARK,
+ VIO_D1_MARK, PORT131_KEYOUT6_MARK, PORT131_MSIOF2_SS1_MARK, \
+ PORT131_KEYOUT11_MARK, LCD2D11_MARK,
+ VIO_D2_MARK, PORT132_KEYOUT7_MARK, PORT132_MSIOF2_SS2_MARK, \
+ PORT132_KEYOUT10_MARK, LCD2D12_MARK,
+ VIO_D3_MARK, MSIOF2_TSYNC_MARK, LCD2D13_MARK,
+ VIO_D4_MARK, MSIOF2_TXD_MARK, LCD2D14_MARK,
+ VIO_D5_MARK, MSIOF2_TSCK_MARK, LCD2D15_MARK,
+ VIO_D6_MARK, PORT136_KEYOUT8_MARK, LCD2D16_MARK,
+ VIO_D7_MARK, PORT137_KEYOUT9_MARK, LCD2D17_MARK,
+ VIO_D8_MARK, PORT138_KEYOUT8_MARK, VIO2_D0_MARK, LCD2D6_MARK,
+ VIO_D9_MARK, PORT139_KEYOUT9_MARK, VIO2_D1_MARK, LCD2D7_MARK,
+ VIO_D10_MARK, TPU0TO2_MARK, VIO2_D2_MARK, LCD2D8_MARK,
+ VIO_D11_MARK, TPU0TO3_MARK, VIO2_D3_MARK, LCD2D9_MARK,
+ VIO_D12_MARK, PORT142_KEYOUT10_MARK, VIO2_D4_MARK, LCD2D2_MARK,
+ VIO_D13_MARK, PORT143_KEYOUT11_MARK, PORT143_KEYOUT6_MARK, \
+ VIO2_D5_MARK, LCD2D3_MARK,
+ VIO_D14_MARK, PORT144_KEYOUT7_MARK, VIO2_D6_MARK, LCD2D4_MARK,
+ VIO_D15_MARK, TPU1TO3_MARK, PORT145_LCD2DISP_MARK, \
+ PORT145_LCD2RS_MARK, VIO2_D7_MARK, LCD2D5_MARK,
+ VIO_CLK_MARK, LCD2DCK_MARK, PORT146_LCD2WR__MARK, VIO2_CLK_MARK, \
+ LCD2D18_MARK,
+ VIO_FIELD_MARK, LCD2RD__MARK, VIO2_FIELD_MARK, LCD2D19_MARK,
+ VIO_CKO_MARK,
+ A27_MARK, PORT149_RDWR_MARK, MFG0_IN1_MARK, PORT149_KEYOUT9_MARK,
+ MFG0_IN2_MARK,
+ TS_SPSYNC3_MARK, MSIOF2_RSCK_MARK,
+ TS_SDAT3_MARK, MSIOF2_RSYNC_MARK,
+ TPU1TO2_MARK, TS_SDEN3_MARK, PORT153_MSIOF2_SS1_MARK,
+ SCIFA2_TXD1_MARK, MSIOF2_MCK0_MARK,
+ SCIFA2_RXD1_MARK, MSIOF2_MCK1_MARK,
+ SCIFA2_RTS1__MARK, PORT156_MSIOF2_SS2_MARK,
+ SCIFA2_CTS1__MARK, PORT157_MSIOF2_RXD_MARK,
+ DINT__MARK, SCIFA2_SCK1_MARK, TS_SCK3_MARK,
+ PORT159_SCIFB_SCK_MARK, PORT159_SCIFA5_SCK_MARK, NMI_MARK,
+ PORT160_SCIFB_TXD_MARK, PORT160_SCIFA5_TXD_MARK,
+ PORT161_SCIFB_CTS__MARK, PORT161_SCIFA5_CTS__MARK,
+ PORT162_SCIFB_RXD_MARK, PORT162_SCIFA5_RXD_MARK,
+ PORT163_SCIFB_RTS__MARK, PORT163_SCIFA5_RTS__MARK, TPU3TO0_MARK,
+ LCDD0_MARK,
+ LCDD1_MARK, PORT193_SCIFA5_CTS__MARK, BBIF2_TSYNC1_MARK,
+ LCDD2_MARK, PORT194_SCIFA5_RTS__MARK, BBIF2_TSCK1_MARK,
+ LCDD3_MARK, PORT195_SCIFA5_RXD_MARK, BBIF2_TXD1_MARK,
+ LCDD4_MARK, PORT196_SCIFA5_TXD_MARK,
+ LCDD5_MARK, PORT197_SCIFA5_SCK_MARK, MFG2_OUT2_MARK, TPU2TO1_MARK,
+ LCDD6_MARK,
+ LCDD7_MARK, TPU4TO1_MARK, MFG4_OUT2_MARK,
+ LCDD8_MARK, D16_MARK,
+ LCDD9_MARK, D17_MARK,
+ LCDD10_MARK, D18_MARK,
+ LCDD11_MARK, D19_MARK,
+ LCDD12_MARK, D20_MARK,
+ LCDD13_MARK, D21_MARK,
+ LCDD14_MARK, D22_MARK,
+ LCDD15_MARK, PORT207_MSIOF0L_SS1_MARK, D23_MARK,
+ LCDD16_MARK, PORT208_MSIOF0L_SS2_MARK, D24_MARK,
+ LCDD17_MARK, D25_MARK,
+ LCDD18_MARK, DREQ2_MARK, PORT210_MSIOF0L_SS1_MARK, D26_MARK,
+ LCDD19_MARK, PORT211_MSIOF0L_SS2_MARK, D27_MARK,
+ LCDD20_MARK, TS_SPSYNC1_MARK, MSIOF0L_MCK0_MARK, D28_MARK,
+ LCDD21_MARK, TS_SDAT1_MARK, MSIOF0L_MCK1_MARK, D29_MARK,
+ LCDD22_MARK, TS_SDEN1_MARK, MSIOF0L_RSCK_MARK, D30_MARK,
+ LCDD23_MARK, TS_SCK1_MARK, MSIOF0L_RSYNC_MARK, D31_MARK,
+ LCDDCK_MARK, LCDWR__MARK,
+ LCDRD__MARK, DACK2_MARK, PORT217_LCD2RS_MARK, MSIOF0L_TSYNC_MARK, \
+ VIO2_FIELD3_MARK, PORT217_LCD2DISP_MARK,
+ LCDHSYN_MARK, LCDCS__MARK, LCDCS2__MARK, DACK3_MARK, \
+ PORT218_VIO_CKOR_MARK,
+ LCDDISP_MARK, LCDRS_MARK, PORT219_LCD2WR__MARK, DREQ3_MARK, \
+ MSIOF0L_TSCK_MARK, VIO2_CLK3_MARK, LCD2DCK_2_MARK,
+ LCDVSYN_MARK, LCDVSYN2_MARK,
+ LCDLCLK_MARK, DREQ1_MARK, PORT221_LCD2CS__MARK, PWEN_MARK, \
+ MSIOF0L_RXD_MARK, VIO2_HD3_MARK, PORT221_LCD2HSYN_MARK,
+ LCDDON_MARK, LCDDON2_MARK, DACK1_MARK, OVCN_MARK, MSIOF0L_TXD_MARK, \
+ VIO2_VD3_MARK, PORT222_LCD2VSYN_MARK,
+
+ SCIFA1_TXD_MARK, OVCN2_MARK,
+ EXTLP_MARK, SCIFA1_SCK_MARK, PORT226_VIO_CKO2_MARK,
+ SCIFA1_RTS__MARK, IDIN_MARK,
+ SCIFA1_RXD_MARK,
+ SCIFA1_CTS__MARK, MFG1_IN1_MARK,
+ MSIOF1_TXD_MARK, SCIFA2_TXD2_MARK,
+ MSIOF1_TSYNC_MARK, SCIFA2_CTS2__MARK,
+ MSIOF1_TSCK_MARK, SCIFA2_SCK2_MARK,
+ MSIOF1_RXD_MARK, SCIFA2_RXD2_MARK,
+ MSIOF1_RSCK_MARK, SCIFA2_RTS2__MARK, VIO2_CLK2_MARK, LCD2D20_MARK,
+ MSIOF1_RSYNC_MARK, MFG1_IN2_MARK, VIO2_VD2_MARK, LCD2D21_MARK,
+ MSIOF1_MCK0_MARK, PORT236_I2C_SDA2_MARK,
+ MSIOF1_MCK1_MARK, PORT237_I2C_SCL2_MARK,
+ MSIOF1_SS1_MARK, VIO2_FIELD2_MARK, LCD2D22_MARK,
+ MSIOF1_SS2_MARK, VIO2_HD2_MARK, LCD2D23_MARK,
+ SCIFA6_TXD_MARK,
+ PORT241_IRDA_OUT_MARK, PORT241_IROUT_MARK, MFG4_OUT1_MARK, TPU4TO0_MARK,
+ PORT242_IRDA_IN_MARK, MFG4_IN2_MARK,
+ PORT243_IRDA_FIRSEL_MARK, PORT243_VIO_CKO2_MARK,
+ PORT244_SCIFA5_CTS__MARK, MFG2_IN1_MARK, PORT244_SCIFB_CTS__MARK, \
+ MSIOF2R_RXD_MARK,
+ PORT245_SCIFA5_RTS__MARK, MFG2_IN2_MARK, PORT245_SCIFB_RTS__MARK, \
+ MSIOF2R_TXD_MARK,
+ PORT246_SCIFA5_RXD_MARK, MFG1_OUT1_MARK, PORT246_SCIFB_RXD_MARK, \
+ TPU1TO0_MARK,
+ PORT247_SCIFA5_TXD_MARK, MFG3_OUT2_MARK, PORT247_SCIFB_TXD_MARK, \
+ TPU3TO1_MARK,
+ PORT248_SCIFA5_SCK_MARK, MFG2_OUT1_MARK, PORT248_SCIFB_SCK_MARK, \
+ TPU2TO0_MARK, PORT248_I2C_SCL3_MARK, MSIOF2R_TSCK_MARK,
+ PORT249_IROUT_MARK, MFG4_IN1_MARK, PORT249_I2C_SDA3_MARK, \
+ MSIOF2R_TSYNC_MARK,
+ SDHICLK0_MARK,
+ SDHICD0_MARK,
+ SDHID0_0_MARK,
+ SDHID0_1_MARK,
+ SDHID0_2_MARK,
+ SDHID0_3_MARK,
+ SDHICMD0_MARK,
+ SDHIWP0_MARK,
+ SDHICLK1_MARK,
+ SDHID1_0_MARK, TS_SPSYNC2_MARK,
+ SDHID1_1_MARK, TS_SDAT2_MARK,
+ SDHID1_2_MARK, TS_SDEN2_MARK,
+ SDHID1_3_MARK, TS_SCK2_MARK,
+ SDHICMD1_MARK,
+ SDHICLK2_MARK,
+ SDHID2_0_MARK, TS_SPSYNC4_MARK,
+ SDHID2_1_MARK, TS_SDAT4_MARK,
+ SDHID2_2_MARK, TS_SDEN4_MARK,
+ SDHID2_3_MARK, TS_SCK4_MARK,
+ SDHICMD2_MARK,
+ MMCCLK0_MARK,
+ MMCD0_0_MARK,
+ MMCD0_1_MARK,
+ MMCD0_2_MARK,
+ MMCD0_3_MARK,
+ MMCD0_4_MARK, TS_SPSYNC5_MARK,
+ MMCD0_5_MARK, TS_SDAT5_MARK,
+ MMCD0_6_MARK, TS_SDEN5_MARK,
+ MMCD0_7_MARK, TS_SCK5_MARK,
+ MMCCMD0_MARK,
+ RESETOUTS__MARK, EXTAL2OUT_MARK,
+ MCP_WAIT__MCP_FRB_MARK,
+ MCP_CKO_MARK, MMCCLK1_MARK,
+ MCP_D15_MCP_NAF15_MARK,
+ MCP_D14_MCP_NAF14_MARK,
+ MCP_D13_MCP_NAF13_MARK,
+ MCP_D12_MCP_NAF12_MARK,
+ MCP_D11_MCP_NAF11_MARK,
+ MCP_D10_MCP_NAF10_MARK,
+ MCP_D9_MCP_NAF9_MARK,
+ MCP_D8_MCP_NAF8_MARK, MMCCMD1_MARK,
+ MCP_D7_MCP_NAF7_MARK, MMCD1_7_MARK,
+
+ MCP_D6_MCP_NAF6_MARK, MMCD1_6_MARK,
+ MCP_D5_MCP_NAF5_MARK, MMCD1_5_MARK,
+ MCP_D4_MCP_NAF4_MARK, MMCD1_4_MARK,
+ MCP_D3_MCP_NAF3_MARK, MMCD1_3_MARK,
+ MCP_D2_MCP_NAF2_MARK, MMCD1_2_MARK,
+ MCP_D1_MCP_NAF1_MARK, MMCD1_1_MARK,
+ MCP_D0_MCP_NAF0_MARK, MMCD1_0_MARK,
+ MCP_NBRSTOUT__MARK,
+ MCP_WE0__MCP_FWE_MARK, MCP_RDWR_MCP_FWE_MARK,
+
+ /* MSEL2 special cases */
+ TSIF2_TS_XX1_MARK,
+ TSIF2_TS_XX2_MARK,
+ TSIF2_TS_XX3_MARK,
+ TSIF2_TS_XX4_MARK,
+ TSIF2_TS_XX5_MARK,
+ TSIF1_TS_XX1_MARK,
+ TSIF1_TS_XX2_MARK,
+ TSIF1_TS_XX3_MARK,
+ TSIF1_TS_XX4_MARK,
+ TSIF1_TS_XX5_MARK,
+ TSIF0_TS_XX1_MARK,
+ TSIF0_TS_XX2_MARK,
+ TSIF0_TS_XX3_MARK,
+ TSIF0_TS_XX4_MARK,
+ TSIF0_TS_XX5_MARK,
+ MST1_TS_XX1_MARK,
+ MST1_TS_XX2_MARK,
+ MST1_TS_XX3_MARK,
+ MST1_TS_XX4_MARK,
+ MST1_TS_XX5_MARK,
+ MST0_TS_XX1_MARK,
+ MST0_TS_XX2_MARK,
+ MST0_TS_XX3_MARK,
+ MST0_TS_XX4_MARK,
+ MST0_TS_XX5_MARK,
+
+ /* MSEL3 special cases */
+ SDHI0_VCCQ_MC0_ON_MARK,
+ SDHI0_VCCQ_MC0_OFF_MARK,
+ DEBUG_MON_VIO_MARK,
+ DEBUG_MON_LCDD_MARK,
+ LCDC_LCDC0_MARK,
+ LCDC_LCDC1_MARK,
+
+ /* MSEL4 special cases */
+ IRQ9_MEM_INT_MARK,
+ IRQ9_MCP_INT_MARK,
+ A11_MARK,
+ KEYOUT8_MARK,
+ TPU4TO3_MARK,
+ RESETA_N_PU_ON_MARK,
+ RESETA_N_PU_OFF_MARK,
+ EDBGREQ_PD_MARK,
+ EDBGREQ_PU_MARK,
+
+ /* Functions with pull-ups */
+ KEYIN0_PU_MARK,
+ KEYIN1_PU_MARK,
+ KEYIN2_PU_MARK,
+ KEYIN3_PU_MARK,
+ KEYIN4_PU_MARK,
+ KEYIN5_PU_MARK,
+ KEYIN6_PU_MARK,
+ KEYIN7_PU_MARK,
+ SDHICD0_PU_MARK,
+ SDHID0_0_PU_MARK,
+ SDHID0_1_PU_MARK,
+ SDHID0_2_PU_MARK,
+ SDHID0_3_PU_MARK,
+ SDHICMD0_PU_MARK,
+ SDHIWP0_PU_MARK,
+ SDHID1_0_PU_MARK,
+ SDHID1_1_PU_MARK,
+ SDHID1_2_PU_MARK,
+ SDHID1_3_PU_MARK,
+ SDHICMD1_PU_MARK,
+ SDHID2_0_PU_MARK,
+ SDHID2_1_PU_MARK,
+ SDHID2_2_PU_MARK,
+ SDHID2_3_PU_MARK,
+ SDHICMD2_PU_MARK,
+ MMCCMD0_PU_MARK,
+ MMCCMD1_PU_MARK,
+ MMCD0_0_PU_MARK,
+ MMCD0_1_PU_MARK,
+ MMCD0_2_PU_MARK,
+ MMCD0_3_PU_MARK,
+ MMCD0_4_PU_MARK,
+ MMCD0_5_PU_MARK,
+ MMCD0_6_PU_MARK,
+ MMCD0_7_PU_MARK,
+ FSIBISLD_PU_MARK,
+ FSIACK_PU_MARK,
+ FSIAILR_PU_MARK,
+ FSIAIBT_PU_MARK,
+ FSIAISLD_PU_MARK,
+
+ PINMUX_MARK_END,
+};
+
+static unsigned short pinmux_data[] = {
+ /* specify valid pin states for each pin in GPIO mode */
+
+ /* Table 25-1 (I/O and Pull U/D) */
+ PORT_DATA_I_PD(0),
+ PORT_DATA_I_PU(1),
+ PORT_DATA_I_PU(2),
+ PORT_DATA_I_PU(3),
+ PORT_DATA_I_PU(4),
+ PORT_DATA_I_PU(5),
+ PORT_DATA_I_PU(6),
+ PORT_DATA_I_PU(7),
+ PORT_DATA_I_PU(8),
+ PORT_DATA_I_PD(9),
+ PORT_DATA_I_PD(10),
+ PORT_DATA_I_PU_PD(11),
+ PORT_DATA_IO_PU_PD(12),
+ PORT_DATA_IO_PU_PD(13),
+ PORT_DATA_IO_PU_PD(14),
+ PORT_DATA_IO_PU_PD(15),
+ PORT_DATA_IO_PD(16),
+ PORT_DATA_IO_PD(17),
+ PORT_DATA_IO_PU(18),
+ PORT_DATA_IO_PU(19),
+ PORT_DATA_O(20),
+ PORT_DATA_O(21),
+ PORT_DATA_O(22),
+ PORT_DATA_O(23),
+ PORT_DATA_O(24),
+ PORT_DATA_I_PD(25),
+ PORT_DATA_I_PD(26),
+ PORT_DATA_IO_PU(27),
+ PORT_DATA_IO_PU(28),
+ PORT_DATA_IO_PD(29),
+ PORT_DATA_IO_PD(30),
+ PORT_DATA_IO_PU(31),
+ PORT_DATA_IO_PD(32),
+ PORT_DATA_I_PU_PD(33),
+ PORT_DATA_IO_PD(34),
+ PORT_DATA_I_PU_PD(35),
+ PORT_DATA_IO_PD(36),
+ PORT_DATA_IO(37),
+ PORT_DATA_O(38),
+ PORT_DATA_I_PU(39),
+ PORT_DATA_I_PU_PD(40),
+ PORT_DATA_O(41),
+ PORT_DATA_IO_PD(42),
+ PORT_DATA_IO_PU_PD(43),
+ PORT_DATA_IO_PU_PD(44),
+ PORT_DATA_IO_PD(45),
+ PORT_DATA_IO_PD(46),
+ PORT_DATA_IO_PD(47),
+ PORT_DATA_I_PD(48),
+ PORT_DATA_IO_PU_PD(49),
+ PORT_DATA_IO_PD(50),
+
+ PORT_DATA_IO_PD(51),
+ PORT_DATA_O(52),
+ PORT_DATA_IO_PU_PD(53),
+ PORT_DATA_IO_PU_PD(54),
+ PORT_DATA_IO_PD(55),
+ PORT_DATA_I_PU_PD(56),
+ PORT_DATA_IO(57),
+ PORT_DATA_IO(58),
+ PORT_DATA_IO(59),
+ PORT_DATA_IO(60),
+ PORT_DATA_IO(61),
+ PORT_DATA_IO_PD(62),
+ PORT_DATA_IO_PD(63),
+ PORT_DATA_IO_PU_PD(64),
+ PORT_DATA_IO_PD(65),
+ PORT_DATA_IO_PU_PD(66),
+ PORT_DATA_IO_PU_PD(67),
+ PORT_DATA_IO_PU_PD(68),
+ PORT_DATA_IO_PU_PD(69),
+ PORT_DATA_IO_PU_PD(70),
+ PORT_DATA_IO_PU_PD(71),
+ PORT_DATA_IO_PU_PD(72),
+ PORT_DATA_I_PU_PD(73),
+ PORT_DATA_IO_PU(74),
+ PORT_DATA_IO_PU(75),
+ PORT_DATA_IO_PU(76),
+ PORT_DATA_IO_PU(77),
+ PORT_DATA_IO_PU(78),
+ PORT_DATA_IO_PU(79),
+ PORT_DATA_IO_PU(80),
+ PORT_DATA_IO_PU(81),
+ PORT_DATA_IO_PU(82),
+ PORT_DATA_IO_PU(83),
+ PORT_DATA_IO_PU(84),
+ PORT_DATA_IO_PU(85),
+ PORT_DATA_IO_PU(86),
+ PORT_DATA_IO_PU(87),
+ PORT_DATA_IO_PU(88),
+ PORT_DATA_IO_PU(89),
+ PORT_DATA_O(90),
+ PORT_DATA_IO_PU(91),
+ PORT_DATA_O(92),
+ PORT_DATA_IO_PU(93),
+ PORT_DATA_O(94),
+ PORT_DATA_I_PU_PD(95),
+ PORT_DATA_IO(96),
+ PORT_DATA_IO(97),
+ PORT_DATA_IO(98),
+ PORT_DATA_I_PU(99),
+ PORT_DATA_O(100),
+ PORT_DATA_O(101),
+ PORT_DATA_I_PU(102),
+ PORT_DATA_IO_PD(103),
+ PORT_DATA_I_PU_PD(104),
+ PORT_DATA_I_PD(105),
+ PORT_DATA_I_PD(106),
+ PORT_DATA_I_PU_PD(107),
+ PORT_DATA_I_PU_PD(108),
+ PORT_DATA_IO_PD(109),
+ PORT_DATA_IO_PD(110),
+ PORT_DATA_IO_PU_PD(111),
+ PORT_DATA_IO_PU_PD(112),
+ PORT_DATA_IO_PU_PD(113),
+ PORT_DATA_IO_PD(114),
+ PORT_DATA_IO_PU(115),
+ PORT_DATA_IO_PU(116),
+ PORT_DATA_IO_PU_PD(117),
+ PORT_DATA_IO_PU_PD(118),
+ PORT_DATA_IO_PD(128),
+
+ PORT_DATA_IO_PD(129),
+ PORT_DATA_IO_PU_PD(130),
+ PORT_DATA_IO_PD(131),
+ PORT_DATA_IO_PD(132),
+ PORT_DATA_IO_PD(133),
+ PORT_DATA_IO_PU_PD(134),
+ PORT_DATA_IO_PU_PD(135),
+ PORT_DATA_IO_PU_PD(136),
+ PORT_DATA_IO_PU_PD(137),
+ PORT_DATA_IO_PD(138),
+ PORT_DATA_IO_PD(139),
+ PORT_DATA_IO_PD(140),
+ PORT_DATA_IO_PD(141),
+ PORT_DATA_IO_PD(142),
+ PORT_DATA_IO_PD(143),
+ PORT_DATA_IO_PU_PD(144),
+ PORT_DATA_IO_PD(145),
+ PORT_DATA_IO_PU_PD(146),
+ PORT_DATA_IO_PU_PD(147),
+ PORT_DATA_IO_PU_PD(148),
+ PORT_DATA_IO_PU_PD(149),
+ PORT_DATA_I_PU_PD(150),
+ PORT_DATA_IO_PU_PD(151),
+ PORT_DATA_IO_PU_PD(152),
+ PORT_DATA_IO_PD(153),
+ PORT_DATA_IO_PD(154),
+ PORT_DATA_I_PU_PD(155),
+ PORT_DATA_IO_PU_PD(156),
+ PORT_DATA_I_PD(157),
+ PORT_DATA_IO_PD(158),
+ PORT_DATA_IO_PU_PD(159),
+ PORT_DATA_IO_PU_PD(160),
+ PORT_DATA_I_PU_PD(161),
+ PORT_DATA_I_PU_PD(162),
+ PORT_DATA_IO_PU_PD(163),
+ PORT_DATA_I_PU_PD(164),
+ PORT_DATA_IO_PD(192),
+ PORT_DATA_IO_PU_PD(193),
+ PORT_DATA_IO_PD(194),
+ PORT_DATA_IO_PU_PD(195),
+ PORT_DATA_IO_PD(196),
+ PORT_DATA_IO_PD(197),
+ PORT_DATA_IO_PD(198),
+ PORT_DATA_IO_PD(199),
+ PORT_DATA_IO_PU_PD(200),
+ PORT_DATA_IO_PU_PD(201),
+ PORT_DATA_IO_PU_PD(202),
+ PORT_DATA_IO_PU_PD(203),
+ PORT_DATA_IO_PU_PD(204),
+ PORT_DATA_IO_PU_PD(205),
+ PORT_DATA_IO_PU_PD(206),
+ PORT_DATA_IO_PD(207),
+ PORT_DATA_IO_PD(208),
+ PORT_DATA_IO_PD(209),
+ PORT_DATA_IO_PD(210),
+ PORT_DATA_IO_PD(211),
+ PORT_DATA_IO_PD(212),
+ PORT_DATA_IO_PD(213),
+ PORT_DATA_IO_PU_PD(214),
+ PORT_DATA_IO_PU_PD(215),
+ PORT_DATA_IO_PD(216),
+ PORT_DATA_IO_PD(217),
+ PORT_DATA_O(218),
+ PORT_DATA_IO_PD(219),
+ PORT_DATA_IO_PD(220),
+ PORT_DATA_IO_PU_PD(221),
+ PORT_DATA_IO_PU_PD(222),
+ PORT_DATA_I_PU_PD(223),
+ PORT_DATA_I_PU_PD(224),
+
+ PORT_DATA_IO_PU_PD(225),
+ PORT_DATA_O(226),
+ PORT_DATA_IO_PU_PD(227),
+ PORT_DATA_I_PU_PD(228),
+ PORT_DATA_I_PD(229),
+ PORT_DATA_IO(230),
+ PORT_DATA_IO_PU_PD(231),
+ PORT_DATA_IO_PU_PD(232),
+ PORT_DATA_I_PU_PD(233),
+ PORT_DATA_IO_PU_PD(234),
+ PORT_DATA_IO_PU_PD(235),
+ PORT_DATA_IO_PU_PD(236),
+ PORT_DATA_IO_PD(237),
+ PORT_DATA_IO_PU_PD(238),
+ PORT_DATA_IO_PU_PD(239),
+ PORT_DATA_IO_PU_PD(240),
+ PORT_DATA_O(241),
+ PORT_DATA_I_PD(242),
+ PORT_DATA_IO_PU_PD(243),
+ PORT_DATA_IO_PU_PD(244),
+ PORT_DATA_IO_PU_PD(245),
+ PORT_DATA_IO_PU_PD(246),
+ PORT_DATA_IO_PU_PD(247),
+ PORT_DATA_IO_PU_PD(248),
+ PORT_DATA_IO_PU_PD(249),
+ PORT_DATA_IO_PU_PD(250),
+ PORT_DATA_IO_PU_PD(251),
+ PORT_DATA_IO_PU_PD(252),
+ PORT_DATA_IO_PU_PD(253),
+ PORT_DATA_IO_PU_PD(254),
+ PORT_DATA_IO_PU_PD(255),
+ PORT_DATA_IO_PU_PD(256),
+ PORT_DATA_IO_PU_PD(257),
+ PORT_DATA_IO_PU_PD(258),
+ PORT_DATA_IO_PU_PD(259),
+ PORT_DATA_IO_PU_PD(260),
+ PORT_DATA_IO_PU_PD(261),
+ PORT_DATA_IO_PU_PD(262),
+ PORT_DATA_IO_PU_PD(263),
+ PORT_DATA_IO_PU_PD(264),
+ PORT_DATA_IO_PU_PD(265),
+ PORT_DATA_IO_PU_PD(266),
+ PORT_DATA_IO_PU_PD(267),
+ PORT_DATA_IO_PU_PD(268),
+ PORT_DATA_IO_PU_PD(269),
+ PORT_DATA_IO_PU_PD(270),
+ PORT_DATA_IO_PU_PD(271),
+ PORT_DATA_IO_PU_PD(272),
+ PORT_DATA_IO_PU_PD(273),
+ PORT_DATA_IO_PU_PD(274),
+ PORT_DATA_IO_PU_PD(275),
+ PORT_DATA_IO_PU_PD(276),
+ PORT_DATA_IO_PU_PD(277),
+ PORT_DATA_IO_PU_PD(278),
+ PORT_DATA_IO_PU_PD(279),
+ PORT_DATA_IO_PU_PD(280),
+ PORT_DATA_O(281),
+ PORT_DATA_O(282),
+ PORT_DATA_I_PU(288),
+ PORT_DATA_IO_PU_PD(289),
+ PORT_DATA_IO_PU_PD(290),
+ PORT_DATA_IO_PU_PD(291),
+ PORT_DATA_IO_PU_PD(292),
+ PORT_DATA_IO_PU_PD(293),
+ PORT_DATA_IO_PU_PD(294),
+ PORT_DATA_IO_PU_PD(295),
+ PORT_DATA_IO_PU_PD(296),
+ PORT_DATA_IO_PU_PD(297),
+ PORT_DATA_IO_PU_PD(298),
+
+ PORT_DATA_IO_PU_PD(299),
+ PORT_DATA_IO_PU_PD(300),
+ PORT_DATA_IO_PU_PD(301),
+ PORT_DATA_IO_PU_PD(302),
+ PORT_DATA_IO_PU_PD(303),
+ PORT_DATA_IO_PU_PD(304),
+ PORT_DATA_IO_PU_PD(305),
+ PORT_DATA_O(306),
+ PORT_DATA_O(307),
+ PORT_DATA_I_PU(308),
+ PORT_DATA_O(309),
+
+ /* Table 25-1 (Function 0-7) */
+ PINMUX_DATA(VBUS_0_MARK, PORT0_FN1),
+ PINMUX_DATA(GPI0_MARK, PORT1_FN1),
+ PINMUX_DATA(GPI1_MARK, PORT2_FN1),
+ PINMUX_DATA(GPI2_MARK, PORT3_FN1),
+ PINMUX_DATA(GPI3_MARK, PORT4_FN1),
+ PINMUX_DATA(GPI4_MARK, PORT5_FN1),
+ PINMUX_DATA(GPI5_MARK, PORT6_FN1),
+ PINMUX_DATA(GPI6_MARK, PORT7_FN1),
+ PINMUX_DATA(GPI7_MARK, PORT8_FN1),
+ PINMUX_DATA(SCIFA7_RXD_MARK, PORT12_FN2),
+ PINMUX_DATA(SCIFA7_CTS__MARK, PORT13_FN2),
+ PINMUX_DATA(GPO7_MARK, PORT14_FN1), \
+ PINMUX_DATA(MFG0_OUT2_MARK, PORT14_FN4),
+ PINMUX_DATA(GPO6_MARK, PORT15_FN1), \
+ PINMUX_DATA(MFG1_OUT2_MARK, PORT15_FN4),
+ PINMUX_DATA(GPO5_MARK, PORT16_FN1), \
+ PINMUX_DATA(SCIFA0_SCK_MARK, PORT16_FN2), \
+ PINMUX_DATA(FSICOSLDT3_MARK, PORT16_FN3), \
+ PINMUX_DATA(PORT16_VIO_CKOR_MARK, PORT16_FN4),
+ PINMUX_DATA(SCIFA0_TXD_MARK, PORT17_FN2),
+ PINMUX_DATA(SCIFA7_TXD_MARK, PORT18_FN2),
+ PINMUX_DATA(SCIFA7_RTS__MARK, PORT19_FN2), \
+ PINMUX_DATA(PORT19_VIO_CKO2_MARK, PORT19_FN3),
+ PINMUX_DATA(GPO0_MARK, PORT20_FN1),
+ PINMUX_DATA(GPO1_MARK, PORT21_FN1),
+ PINMUX_DATA(GPO2_MARK, PORT22_FN1), \
+ PINMUX_DATA(STATUS0_MARK, PORT22_FN2),
+ PINMUX_DATA(GPO3_MARK, PORT23_FN1), \
+ PINMUX_DATA(STATUS1_MARK, PORT23_FN2),
+ PINMUX_DATA(GPO4_MARK, PORT24_FN1), \
+ PINMUX_DATA(STATUS2_MARK, PORT24_FN2),
+ PINMUX_DATA(VINT_MARK, PORT25_FN1),
+ PINMUX_DATA(TCKON_MARK, PORT26_FN1),
+ PINMUX_DATA(XDVFS1_MARK, PORT27_FN1), \
+ PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
+ MSEL2CR_MSEL16_1), \
+ PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
+ MSEL2CR_MSEL18_1), \
+ PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
+ PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
+ PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
+ PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
+ MSEL2CR_MSEL16_1), \
+ PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
+ MSEL2CR_MSEL18_1), \
+ PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
+ PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
+ PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
+ PINMUX_DATA(SIM_CLK_MARK, PORT30_FN1), \
+ PINMUX_DATA(PORT30_VIO_CKOR_MARK, PORT30_FN4),
+ PINMUX_DATA(SIM_D_MARK, PORT31_FN1), \
+ PINMUX_DATA(PORT31_IROUT_MARK, PORT31_FN4),
+ PINMUX_DATA(SCIFA4_TXD_MARK, PORT32_FN2),
+ PINMUX_DATA(SCIFA4_RXD_MARK, PORT33_FN2), \
+ PINMUX_DATA(XWUP_MARK, PORT33_FN3),
+ PINMUX_DATA(SCIFA4_RTS__MARK, PORT34_FN2),
+ PINMUX_DATA(SCIFA4_CTS__MARK, PORT35_FN2),
+ PINMUX_DATA(FSIBOBT_MARK, PORT36_FN1), \
+ PINMUX_DATA(FSIBIBT_MARK, PORT36_FN2),
+ PINMUX_DATA(FSIBOLR_MARK, PORT37_FN1), \
+ PINMUX_DATA(FSIBILR_MARK, PORT37_FN2),
+ PINMUX_DATA(FSIBOSLD_MARK, PORT38_FN1),
+ PINMUX_DATA(FSIBISLD_MARK, PORT39_FN1),
+ PINMUX_DATA(VACK_MARK, PORT40_FN1),
+ PINMUX_DATA(XTAL1L_MARK, PORT41_FN1),
+ PINMUX_DATA(SCIFA0_RTS__MARK, PORT42_FN2), \
+ PINMUX_DATA(FSICOSLDT2_MARK, PORT42_FN3),
+ PINMUX_DATA(SCIFA0_RXD_MARK, PORT43_FN2),
+ PINMUX_DATA(SCIFA0_CTS__MARK, PORT44_FN2), \
+ PINMUX_DATA(FSICOSLDT1_MARK, PORT44_FN3),
+ PINMUX_DATA(FSICOBT_MARK, PORT45_FN1), \
+ PINMUX_DATA(FSICIBT_MARK, PORT45_FN2), \
+ PINMUX_DATA(FSIDOBT_MARK, PORT45_FN3), \
+ PINMUX_DATA(FSIDIBT_MARK, PORT45_FN4),
+ PINMUX_DATA(FSICOLR_MARK, PORT46_FN1), \
+ PINMUX_DATA(FSICILR_MARK, PORT46_FN2), \
+ PINMUX_DATA(FSIDOLR_MARK, PORT46_FN3), \
+ PINMUX_DATA(FSIDILR_MARK, PORT46_FN4),
+ PINMUX_DATA(FSICOSLD_MARK, PORT47_FN1), \
+ PINMUX_DATA(PORT47_FSICSPDIF_MARK, PORT47_FN2),
+ PINMUX_DATA(FSICISLD_MARK, PORT48_FN1), \
+ PINMUX_DATA(FSIDISLD_MARK, PORT48_FN3),
+ PINMUX_DATA(FSIACK_MARK, PORT49_FN1), \
+ PINMUX_DATA(PORT49_IRDA_OUT_MARK, PORT49_FN2, MSEL4CR_MSEL19_1), \
+ PINMUX_DATA(PORT49_IROUT_MARK, PORT49_FN4), \
+ PINMUX_DATA(FSIAOMC_MARK, PORT49_FN5),
+ PINMUX_DATA(FSIAOLR_MARK, PORT50_FN1), \
+ PINMUX_DATA(BBIF2_TSYNC2_MARK, PORT50_FN2), \
+ PINMUX_DATA(TPU2TO2_MARK, PORT50_FN3), \
+ PINMUX_DATA(FSIAILR_MARK, PORT50_FN5),
+
+ PINMUX_DATA(FSIAOBT_MARK, PORT51_FN1), \
+ PINMUX_DATA(BBIF2_TSCK2_MARK, PORT51_FN2), \
+ PINMUX_DATA(TPU2TO3_MARK, PORT51_FN3), \
+ PINMUX_DATA(FSIAIBT_MARK, PORT51_FN5),
+ PINMUX_DATA(FSIAOSLD_MARK, PORT52_FN1), \
+ PINMUX_DATA(BBIF2_TXD2_MARK, PORT52_FN2),
+ PINMUX_DATA(FSIASPDIF_MARK, PORT53_FN1), \
+ PINMUX_DATA(PORT53_IRDA_IN_MARK, PORT53_FN2, MSEL4CR_MSEL19_1), \
+ PINMUX_DATA(TPU3TO3_MARK, PORT53_FN3), \
+ PINMUX_DATA(FSIBSPDIF_MARK, PORT53_FN5), \
+ PINMUX_DATA(PORT53_FSICSPDIF_MARK, PORT53_FN6),
+ PINMUX_DATA(FSIBCK_MARK, PORT54_FN1), \
+ PINMUX_DATA(PORT54_IRDA_FIRSEL_MARK, PORT54_FN2, MSEL4CR_MSEL19_1), \
+ PINMUX_DATA(TPU3TO2_MARK, PORT54_FN3), \
+ PINMUX_DATA(FSIBOMC_MARK, PORT54_FN5), \
+ PINMUX_DATA(FSICCK_MARK, PORT54_FN6), \
+ PINMUX_DATA(FSICOMC_MARK, PORT54_FN7),
+ PINMUX_DATA(FSIAISLD_MARK, PORT55_FN1), \
+ PINMUX_DATA(TPU0TO0_MARK, PORT55_FN3),
+ PINMUX_DATA(A0_MARK, PORT57_FN1), \
+ PINMUX_DATA(BS__MARK, PORT57_FN2),
+ PINMUX_DATA(A12_MARK, PORT58_FN1), \
+ PINMUX_DATA(PORT58_KEYOUT7_MARK, PORT58_FN2), \
+ PINMUX_DATA(TPU4TO2_MARK, PORT58_FN4),
+ PINMUX_DATA(A13_MARK, PORT59_FN1), \
+ PINMUX_DATA(PORT59_KEYOUT6_MARK, PORT59_FN2), \
+ PINMUX_DATA(TPU0TO1_MARK, PORT59_FN4),
+ PINMUX_DATA(A14_MARK, PORT60_FN1), \
+ PINMUX_DATA(KEYOUT5_MARK, PORT60_FN2),
+ PINMUX_DATA(A15_MARK, PORT61_FN1), \
+ PINMUX_DATA(KEYOUT4_MARK, PORT61_FN2),
+ PINMUX_DATA(A16_MARK, PORT62_FN1), \
+ PINMUX_DATA(KEYOUT3_MARK, PORT62_FN2), \
+ PINMUX_DATA(MSIOF0_SS1_MARK, PORT62_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A17_MARK, PORT63_FN1), \
+ PINMUX_DATA(KEYOUT2_MARK, PORT63_FN2), \
+ PINMUX_DATA(MSIOF0_TSYNC_MARK, PORT63_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A18_MARK, PORT64_FN1), \
+ PINMUX_DATA(KEYOUT1_MARK, PORT64_FN2), \
+ PINMUX_DATA(MSIOF0_TSCK_MARK, PORT64_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A19_MARK, PORT65_FN1), \
+ PINMUX_DATA(KEYOUT0_MARK, PORT65_FN2), \
+ PINMUX_DATA(MSIOF0_TXD_MARK, PORT65_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A20_MARK, PORT66_FN1), \
+ PINMUX_DATA(KEYIN0_MARK, PORT66_FN2), \
+ PINMUX_DATA(MSIOF0_RSCK_MARK, PORT66_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A21_MARK, PORT67_FN1), \
+ PINMUX_DATA(KEYIN1_MARK, PORT67_FN2), \
+ PINMUX_DATA(MSIOF0_RSYNC_MARK, PORT67_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A22_MARK, PORT68_FN1), \
+ PINMUX_DATA(KEYIN2_MARK, PORT68_FN2), \
+ PINMUX_DATA(MSIOF0_MCK0_MARK, PORT68_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A23_MARK, PORT69_FN1), \
+ PINMUX_DATA(KEYIN3_MARK, PORT69_FN2), \
+ PINMUX_DATA(MSIOF0_MCK1_MARK, PORT69_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A24_MARK, PORT70_FN1), \
+ PINMUX_DATA(KEYIN4_MARK, PORT70_FN2), \
+ PINMUX_DATA(MSIOF0_RXD_MARK, PORT70_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A25_MARK, PORT71_FN1), \
+ PINMUX_DATA(KEYIN5_MARK, PORT71_FN2), \
+ PINMUX_DATA(MSIOF0_SS2_MARK, PORT71_FN4, MSEL3CR_MSEL11_0),
+ PINMUX_DATA(A26_MARK, PORT72_FN1), \
+ PINMUX_DATA(KEYIN6_MARK, PORT72_FN2),
+ PINMUX_DATA(KEYIN7_MARK, PORT73_FN2),
+ PINMUX_DATA(D0_NAF0_MARK, PORT74_FN1),
+ PINMUX_DATA(D1_NAF1_MARK, PORT75_FN1),
+ PINMUX_DATA(D2_NAF2_MARK, PORT76_FN1),
+ PINMUX_DATA(D3_NAF3_MARK, PORT77_FN1),
+ PINMUX_DATA(D4_NAF4_MARK, PORT78_FN1),
+ PINMUX_DATA(D5_NAF5_MARK, PORT79_FN1),
+ PINMUX_DATA(D6_NAF6_MARK, PORT80_FN1),
+ PINMUX_DATA(D7_NAF7_MARK, PORT81_FN1),
+ PINMUX_DATA(D8_NAF8_MARK, PORT82_FN1),
+ PINMUX_DATA(D9_NAF9_MARK, PORT83_FN1),
+ PINMUX_DATA(D10_NAF10_MARK, PORT84_FN1),
+ PINMUX_DATA(D11_NAF11_MARK, PORT85_FN1),
+ PINMUX_DATA(D12_NAF12_MARK, PORT86_FN1),
+ PINMUX_DATA(D13_NAF13_MARK, PORT87_FN1),
+ PINMUX_DATA(D14_NAF14_MARK, PORT88_FN1),
+ PINMUX_DATA(D15_NAF15_MARK, PORT89_FN1),
+ PINMUX_DATA(CS4__MARK, PORT90_FN1),
+ PINMUX_DATA(CS5A__MARK, PORT91_FN1), \
+ PINMUX_DATA(PORT91_RDWR_MARK, PORT91_FN2),
+ PINMUX_DATA(CS5B__MARK, PORT92_FN1), \
+ PINMUX_DATA(FCE1__MARK, PORT92_FN2),
+ PINMUX_DATA(CS6B__MARK, PORT93_FN1), \
+ PINMUX_DATA(DACK0_MARK, PORT93_FN4),
+ PINMUX_DATA(FCE0__MARK, PORT94_FN1), \
+ PINMUX_DATA(CS6A__MARK, PORT94_FN2),
+ PINMUX_DATA(WAIT__MARK, PORT95_FN1), \
+ PINMUX_DATA(DREQ0_MARK, PORT95_FN2),
+ PINMUX_DATA(RD__FSC_MARK, PORT96_FN1),
+ PINMUX_DATA(WE0__FWE_MARK, PORT97_FN1), \
+ PINMUX_DATA(RDWR_FWE_MARK, PORT97_FN2),
+ PINMUX_DATA(WE1__MARK, PORT98_FN1),
+ PINMUX_DATA(FRB_MARK, PORT99_FN1),
+ PINMUX_DATA(CKO_MARK, PORT100_FN1),
+ PINMUX_DATA(NBRSTOUT__MARK, PORT101_FN1),
+ PINMUX_DATA(NBRST__MARK, PORT102_FN1),
+ PINMUX_DATA(BBIF2_TXD_MARK, PORT103_FN3),
+ PINMUX_DATA(BBIF2_RXD_MARK, PORT104_FN3),
+ PINMUX_DATA(BBIF2_SYNC_MARK, PORT105_FN3),
+ PINMUX_DATA(BBIF2_SCK_MARK, PORT106_FN3),
+ PINMUX_DATA(SCIFA3_CTS__MARK, PORT107_FN3), \
+ PINMUX_DATA(MFG3_IN2_MARK, PORT107_FN4),
+ PINMUX_DATA(SCIFA3_RXD_MARK, PORT108_FN3), \
+ PINMUX_DATA(MFG3_IN1_MARK, PORT108_FN4),
+ PINMUX_DATA(BBIF1_SS2_MARK, PORT109_FN2), \
+ PINMUX_DATA(SCIFA3_RTS__MARK, PORT109_FN3), \
+ PINMUX_DATA(MFG3_OUT1_MARK, PORT109_FN4),
+ PINMUX_DATA(SCIFA3_TXD_MARK, PORT110_FN3),
+ PINMUX_DATA(HSI_RX_DATA_MARK, PORT111_FN1), \
+ PINMUX_DATA(BBIF1_RXD_MARK, PORT111_FN3),
+ PINMUX_DATA(HSI_TX_WAKE_MARK, PORT112_FN1), \
+ PINMUX_DATA(BBIF1_TSCK_MARK, PORT112_FN3),
+ PINMUX_DATA(HSI_TX_DATA_MARK, PORT113_FN1), \
+ PINMUX_DATA(BBIF1_TSYNC_MARK, PORT113_FN3),
+ PINMUX_DATA(HSI_TX_READY_MARK, PORT114_FN1), \
+ PINMUX_DATA(BBIF1_TXD_MARK, PORT114_FN3),
+ PINMUX_DATA(HSI_RX_READY_MARK, PORT115_FN1), \
+ PINMUX_DATA(BBIF1_RSCK_MARK, PORT115_FN3), \
+ PINMUX_DATA(PORT115_I2C_SCL2_MARK, PORT115_FN5, MSEL2CR_MSEL17_1), \
+ PINMUX_DATA(PORT115_I2C_SCL3_MARK, PORT115_FN6, MSEL2CR_MSEL19_1),
+ PINMUX_DATA(HSI_RX_WAKE_MARK, PORT116_FN1), \
+ PINMUX_DATA(BBIF1_RSYNC_MARK, PORT116_FN3), \
+ PINMUX_DATA(PORT116_I2C_SDA2_MARK, PORT116_FN5, MSEL2CR_MSEL17_1), \
+ PINMUX_DATA(PORT116_I2C_SDA3_MARK, PORT116_FN6, MSEL2CR_MSEL19_1),
+ PINMUX_DATA(HSI_RX_FLAG_MARK, PORT117_FN1), \
+ PINMUX_DATA(BBIF1_SS1_MARK, PORT117_FN2), \
+ PINMUX_DATA(BBIF1_FLOW_MARK, PORT117_FN3),
+ PINMUX_DATA(HSI_TX_FLAG_MARK, PORT118_FN1),
+ PINMUX_DATA(VIO_VD_MARK, PORT128_FN1), \
+ PINMUX_DATA(PORT128_LCD2VSYN_MARK, PORT128_FN4, MSEL3CR_MSEL2_0), \
+ PINMUX_DATA(VIO2_VD_MARK, PORT128_FN6, MSEL4CR_MSEL27_0), \
+ PINMUX_DATA(LCD2D0_MARK, PORT128_FN7),
+
+ PINMUX_DATA(VIO_HD_MARK, PORT129_FN1), \
+ PINMUX_DATA(PORT129_LCD2HSYN_MARK, PORT129_FN4), \
+ PINMUX_DATA(PORT129_LCD2CS__MARK, PORT129_FN5), \
+ PINMUX_DATA(VIO2_HD_MARK, PORT129_FN6, MSEL4CR_MSEL27_0), \
+ PINMUX_DATA(LCD2D1_MARK, PORT129_FN7),
+ PINMUX_DATA(VIO_D0_MARK, PORT130_FN1), \
+ PINMUX_DATA(PORT130_MSIOF2_RXD_MARK, PORT130_FN3, MSEL4CR_MSEL11_0,
+ MSEL4CR_MSEL10_1), \
+ PINMUX_DATA(LCD2D10_MARK, PORT130_FN7),
+ PINMUX_DATA(VIO_D1_MARK, PORT131_FN1), \
+ PINMUX_DATA(PORT131_KEYOUT6_MARK, PORT131_FN2), \
+ PINMUX_DATA(PORT131_MSIOF2_SS1_MARK, PORT131_FN3), \
+ PINMUX_DATA(PORT131_KEYOUT11_MARK, PORT131_FN4), \
+ PINMUX_DATA(LCD2D11_MARK, PORT131_FN7),
+ PINMUX_DATA(VIO_D2_MARK, PORT132_FN1), \
+ PINMUX_DATA(PORT132_KEYOUT7_MARK, PORT132_FN2), \
+ PINMUX_DATA(PORT132_MSIOF2_SS2_MARK, PORT132_FN3), \
+ PINMUX_DATA(PORT132_KEYOUT10_MARK, PORT132_FN4), \
+ PINMUX_DATA(LCD2D12_MARK, PORT132_FN7),
+ PINMUX_DATA(VIO_D3_MARK, PORT133_FN1), \
+ PINMUX_DATA(MSIOF2_TSYNC_MARK, PORT133_FN3, MSEL4CR_MSEL11_0), \
+ PINMUX_DATA(LCD2D13_MARK, PORT133_FN7),
+ PINMUX_DATA(VIO_D4_MARK, PORT134_FN1), \
+ PINMUX_DATA(MSIOF2_TXD_MARK, PORT134_FN3, MSEL4CR_MSEL11_0), \
+ PINMUX_DATA(LCD2D14_MARK, PORT134_FN7),
+ PINMUX_DATA(VIO_D5_MARK, PORT135_FN1), \
+ PINMUX_DATA(MSIOF2_TSCK_MARK, PORT135_FN3, MSEL4CR_MSEL11_0), \
+ PINMUX_DATA(LCD2D15_MARK, PORT135_FN7),
+ PINMUX_DATA(VIO_D6_MARK, PORT136_FN1), \
+ PINMUX_DATA(PORT136_KEYOUT8_MARK, PORT136_FN2), \
+ PINMUX_DATA(LCD2D16_MARK, PORT136_FN7),
+ PINMUX_DATA(VIO_D7_MARK, PORT137_FN1), \
+ PINMUX_DATA(PORT137_KEYOUT9_MARK, PORT137_FN2), \
+ PINMUX_DATA(LCD2D17_MARK, PORT137_FN7),
+ PINMUX_DATA(VIO_D8_MARK, PORT138_FN1), \
+ PINMUX_DATA(PORT138_KEYOUT8_MARK, PORT138_FN2), \
+ PINMUX_DATA(VIO2_D0_MARK, PORT138_FN6), \
+ PINMUX_DATA(LCD2D6_MARK, PORT138_FN7),
+ PINMUX_DATA(VIO_D9_MARK, PORT139_FN1), \
+ PINMUX_DATA(PORT139_KEYOUT9_MARK, PORT139_FN2), \
+ PINMUX_DATA(VIO2_D1_MARK, PORT139_FN6), \
+ PINMUX_DATA(LCD2D7_MARK, PORT139_FN7),
+ PINMUX_DATA(VIO_D10_MARK, PORT140_FN1), \
+ PINMUX_DATA(TPU0TO2_MARK, PORT140_FN4), \
+ PINMUX_DATA(VIO2_D2_MARK, PORT140_FN6), \
+ PINMUX_DATA(LCD2D8_MARK, PORT140_FN7),
+ PINMUX_DATA(VIO_D11_MARK, PORT141_FN1), \
+ PINMUX_DATA(TPU0TO3_MARK, PORT141_FN4), \
+ PINMUX_DATA(VIO2_D3_MARK, PORT141_FN6), \
+ PINMUX_DATA(LCD2D9_MARK, PORT141_FN7),
+ PINMUX_DATA(VIO_D12_MARK, PORT142_FN1), \
+ PINMUX_DATA(PORT142_KEYOUT10_MARK, PORT142_FN2), \
+ PINMUX_DATA(VIO2_D4_MARK, PORT142_FN6), \
+ PINMUX_DATA(LCD2D2_MARK, PORT142_FN7),
+ PINMUX_DATA(VIO_D13_MARK, PORT143_FN1), \
+ PINMUX_DATA(PORT143_KEYOUT11_MARK, PORT143_FN2), \
+ PINMUX_DATA(PORT143_KEYOUT6_MARK, PORT143_FN3), \
+ PINMUX_DATA(VIO2_D5_MARK, PORT143_FN6), \
+ PINMUX_DATA(LCD2D3_MARK, PORT143_FN7),
+ PINMUX_DATA(VIO_D14_MARK, PORT144_FN1), \
+ PINMUX_DATA(PORT144_KEYOUT7_MARK, PORT144_FN2), \
+ PINMUX_DATA(VIO2_D6_MARK, PORT144_FN6), \
+ PINMUX_DATA(LCD2D4_MARK, PORT144_FN7),
+ PINMUX_DATA(VIO_D15_MARK, PORT145_FN1), \
+ PINMUX_DATA(TPU1TO3_MARK, PORT145_FN3), \
+ PINMUX_DATA(PORT145_LCD2DISP_MARK, PORT145_FN4), \
+ PINMUX_DATA(PORT145_LCD2RS_MARK, PORT145_FN5), \
+ PINMUX_DATA(VIO2_D7_MARK, PORT145_FN6), \
+ PINMUX_DATA(LCD2D5_MARK, PORT145_FN7),
+ PINMUX_DATA(VIO_CLK_MARK, PORT146_FN1), \
+ PINMUX_DATA(LCD2DCK_MARK, PORT146_FN4), \
+ PINMUX_DATA(PORT146_LCD2WR__MARK, PORT146_FN5), \
+ PINMUX_DATA(VIO2_CLK_MARK, PORT146_FN6, MSEL4CR_MSEL27_0), \
+ PINMUX_DATA(LCD2D18_MARK, PORT146_FN7),
+ PINMUX_DATA(VIO_FIELD_MARK, PORT147_FN1), \
+ PINMUX_DATA(LCD2RD__MARK, PORT147_FN4), \
+ PINMUX_DATA(VIO2_FIELD_MARK, PORT147_FN6, MSEL4CR_MSEL27_0), \
+ PINMUX_DATA(LCD2D19_MARK, PORT147_FN7),
+ PINMUX_DATA(VIO_CKO_MARK, PORT148_FN1),
+ PINMUX_DATA(A27_MARK, PORT149_FN1), \
+ PINMUX_DATA(PORT149_RDWR_MARK, PORT149_FN2), \
+ PINMUX_DATA(MFG0_IN1_MARK, PORT149_FN3), \
+ PINMUX_DATA(PORT149_KEYOUT9_MARK, PORT149_FN4),
+ PINMUX_DATA(MFG0_IN2_MARK, PORT150_FN3),
+ PINMUX_DATA(TS_SPSYNC3_MARK, PORT151_FN4), \
+ PINMUX_DATA(MSIOF2_RSCK_MARK, PORT151_FN5),
+ PINMUX_DATA(TS_SDAT3_MARK, PORT152_FN4), \
+ PINMUX_DATA(MSIOF2_RSYNC_MARK, PORT152_FN5),
+ PINMUX_DATA(TPU1TO2_MARK, PORT153_FN3), \
+ PINMUX_DATA(TS_SDEN3_MARK, PORT153_FN4), \
+ PINMUX_DATA(PORT153_MSIOF2_SS1_MARK, PORT153_FN5),
+ PINMUX_DATA(SCIFA2_TXD1_MARK, PORT154_FN2, MSEL3CR_MSEL9_0), \
+ PINMUX_DATA(MSIOF2_MCK0_MARK, PORT154_FN5),
+ PINMUX_DATA(SCIFA2_RXD1_MARK, PORT155_FN2, MSEL3CR_MSEL9_0), \
+ PINMUX_DATA(MSIOF2_MCK1_MARK, PORT155_FN5),
+ PINMUX_DATA(SCIFA2_RTS1__MARK, PORT156_FN2, MSEL3CR_MSEL9_0), \
+ PINMUX_DATA(PORT156_MSIOF2_SS2_MARK, PORT156_FN5),
+ PINMUX_DATA(SCIFA2_CTS1__MARK, PORT157_FN2, MSEL3CR_MSEL9_0), \
+ PINMUX_DATA(PORT157_MSIOF2_RXD_MARK, PORT157_FN5, MSEL4CR_MSEL11_0,
+ MSEL4CR_MSEL10_0),
+ PINMUX_DATA(DINT__MARK, PORT158_FN1), \
+ PINMUX_DATA(SCIFA2_SCK1_MARK, PORT158_FN2, MSEL3CR_MSEL9_0), \
+ PINMUX_DATA(TS_SCK3_MARK, PORT158_FN4),
+ PINMUX_DATA(PORT159_SCIFB_SCK_MARK, PORT159_FN1, MSEL4CR_MSEL22_0), \
+ PINMUX_DATA(PORT159_SCIFA5_SCK_MARK, PORT159_FN2, MSEL4CR_MSEL21_1), \
+ PINMUX_DATA(NMI_MARK, PORT159_FN3),
+ PINMUX_DATA(PORT160_SCIFB_TXD_MARK, PORT160_FN1, MSEL4CR_MSEL22_0), \
+ PINMUX_DATA(PORT160_SCIFA5_TXD_MARK, PORT160_FN2, MSEL4CR_MSEL21_1),
+ PINMUX_DATA(PORT161_SCIFB_CTS__MARK, PORT161_FN1, MSEL4CR_MSEL22_0), \
+ PINMUX_DATA(PORT161_SCIFA5_CTS__MARK, PORT161_FN2, MSEL4CR_MSEL21_1),
+ PINMUX_DATA(PORT162_SCIFB_RXD_MARK, PORT162_FN1, MSEL4CR_MSEL22_0), \
+ PINMUX_DATA(PORT162_SCIFA5_RXD_MARK, PORT162_FN2, MSEL4CR_MSEL21_1),
+ PINMUX_DATA(PORT163_SCIFB_RTS__MARK, PORT163_FN1, MSEL4CR_MSEL22_0), \
+ PINMUX_DATA(PORT163_SCIFA5_RTS__MARK, PORT163_FN2, MSEL4CR_MSEL21_1), \
+ PINMUX_DATA(TPU3TO0_MARK, PORT163_FN5),
+ PINMUX_DATA(LCDD0_MARK, PORT192_FN1),
+ PINMUX_DATA(LCDD1_MARK, PORT193_FN1), \
+ PINMUX_DATA(PORT193_SCIFA5_CTS__MARK, PORT193_FN3, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_1), \
+ PINMUX_DATA(BBIF2_TSYNC1_MARK, PORT193_FN5),
+ PINMUX_DATA(LCDD2_MARK, PORT194_FN1), \
+ PINMUX_DATA(PORT194_SCIFA5_RTS__MARK, PORT194_FN3, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_1), \
+ PINMUX_DATA(BBIF2_TSCK1_MARK, PORT194_FN5),
+ PINMUX_DATA(LCDD3_MARK, PORT195_FN1), \
+ PINMUX_DATA(PORT195_SCIFA5_RXD_MARK, PORT195_FN3, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_1), \
+ PINMUX_DATA(BBIF2_TXD1_MARK, PORT195_FN5),
+ PINMUX_DATA(LCDD4_MARK, PORT196_FN1), \
+ PINMUX_DATA(PORT196_SCIFA5_TXD_MARK, PORT196_FN3, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_1),
+ PINMUX_DATA(LCDD5_MARK, PORT197_FN1), \
+ PINMUX_DATA(PORT197_SCIFA5_SCK_MARK, PORT197_FN3, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_1), \
+ PINMUX_DATA(MFG2_OUT2_MARK, PORT197_FN5), \
+ PINMUX_DATA(TPU2TO1_MARK, PORT197_FN7),
+ PINMUX_DATA(LCDD6_MARK, PORT198_FN1),
+ PINMUX_DATA(LCDD7_MARK, PORT199_FN1), \
+ PINMUX_DATA(TPU4TO1_MARK, PORT199_FN2), \
+ PINMUX_DATA(MFG4_OUT2_MARK, PORT199_FN5),
+ PINMUX_DATA(LCDD8_MARK, PORT200_FN1), \
+ PINMUX_DATA(D16_MARK, PORT200_FN6),
+ PINMUX_DATA(LCDD9_MARK, PORT201_FN1), \
+ PINMUX_DATA(D17_MARK, PORT201_FN6),
+ PINMUX_DATA(LCDD10_MARK, PORT202_FN1), \
+ PINMUX_DATA(D18_MARK, PORT202_FN6),
+ PINMUX_DATA(LCDD11_MARK, PORT203_FN1), \
+ PINMUX_DATA(D19_MARK, PORT203_FN6),
+ PINMUX_DATA(LCDD12_MARK, PORT204_FN1), \
+ PINMUX_DATA(D20_MARK, PORT204_FN6),
+ PINMUX_DATA(LCDD13_MARK, PORT205_FN1), \
+ PINMUX_DATA(D21_MARK, PORT205_FN6),
+ PINMUX_DATA(LCDD14_MARK, PORT206_FN1), \
+ PINMUX_DATA(D22_MARK, PORT206_FN6),
+ PINMUX_DATA(LCDD15_MARK, PORT207_FN1), \
+ PINMUX_DATA(PORT207_MSIOF0L_SS1_MARK, PORT207_FN2, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D23_MARK, PORT207_FN6),
+ PINMUX_DATA(LCDD16_MARK, PORT208_FN1), \
+ PINMUX_DATA(PORT208_MSIOF0L_SS2_MARK, PORT208_FN2, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D24_MARK, PORT208_FN6),
+ PINMUX_DATA(LCDD17_MARK, PORT209_FN1), \
+ PINMUX_DATA(D25_MARK, PORT209_FN6),
+ PINMUX_DATA(LCDD18_MARK, PORT210_FN1), \
+ PINMUX_DATA(DREQ2_MARK, PORT210_FN2), \
+ PINMUX_DATA(PORT210_MSIOF0L_SS1_MARK, PORT210_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D26_MARK, PORT210_FN6),
+ PINMUX_DATA(LCDD19_MARK, PORT211_FN1), \
+ PINMUX_DATA(PORT211_MSIOF0L_SS2_MARK, PORT211_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D27_MARK, PORT211_FN6),
+ PINMUX_DATA(LCDD20_MARK, PORT212_FN1), \
+ PINMUX_DATA(TS_SPSYNC1_MARK, PORT212_FN2), \
+ PINMUX_DATA(MSIOF0L_MCK0_MARK, PORT212_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D28_MARK, PORT212_FN6),
+ PINMUX_DATA(LCDD21_MARK, PORT213_FN1), \
+ PINMUX_DATA(TS_SDAT1_MARK, PORT213_FN2), \
+ PINMUX_DATA(MSIOF0L_MCK1_MARK, PORT213_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D29_MARK, PORT213_FN6),
+ PINMUX_DATA(LCDD22_MARK, PORT214_FN1), \
+ PINMUX_DATA(TS_SDEN1_MARK, PORT214_FN2), \
+ PINMUX_DATA(MSIOF0L_RSCK_MARK, PORT214_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D30_MARK, PORT214_FN6),
+ PINMUX_DATA(LCDD23_MARK, PORT215_FN1), \
+ PINMUX_DATA(TS_SCK1_MARK, PORT215_FN2), \
+ PINMUX_DATA(MSIOF0L_RSYNC_MARK, PORT215_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(D31_MARK, PORT215_FN6),
+ PINMUX_DATA(LCDDCK_MARK, PORT216_FN1), \
+ PINMUX_DATA(LCDWR__MARK, PORT216_FN2),
+ PINMUX_DATA(LCDRD__MARK, PORT217_FN1), \
+ PINMUX_DATA(DACK2_MARK, PORT217_FN2), \
+ PINMUX_DATA(PORT217_LCD2RS_MARK, PORT217_FN3), \
+ PINMUX_DATA(MSIOF0L_TSYNC_MARK, PORT217_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(VIO2_FIELD3_MARK, PORT217_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_1), \
+ PINMUX_DATA(PORT217_LCD2DISP_MARK, PORT217_FN7),
+ PINMUX_DATA(LCDHSYN_MARK, PORT218_FN1), \
+ PINMUX_DATA(LCDCS__MARK, PORT218_FN2), \
+ PINMUX_DATA(LCDCS2__MARK, PORT218_FN3), \
+ PINMUX_DATA(DACK3_MARK, PORT218_FN4), \
+ PINMUX_DATA(PORT218_VIO_CKOR_MARK, PORT218_FN5),
+ PINMUX_DATA(LCDDISP_MARK, PORT219_FN1), \
+ PINMUX_DATA(LCDRS_MARK, PORT219_FN2), \
+ PINMUX_DATA(PORT219_LCD2WR__MARK, PORT219_FN3), \
+ PINMUX_DATA(DREQ3_MARK, PORT219_FN4), \
+ PINMUX_DATA(MSIOF0L_TSCK_MARK, PORT219_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(VIO2_CLK3_MARK, PORT219_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_1), \
+ PINMUX_DATA(LCD2DCK_2_MARK, PORT219_FN7),
+ PINMUX_DATA(LCDVSYN_MARK, PORT220_FN1), \
+ PINMUX_DATA(LCDVSYN2_MARK, PORT220_FN2),
+ PINMUX_DATA(LCDLCLK_MARK, PORT221_FN1), \
+ PINMUX_DATA(DREQ1_MARK, PORT221_FN2), \
+ PINMUX_DATA(PORT221_LCD2CS__MARK, PORT221_FN3), \
+ PINMUX_DATA(PWEN_MARK, PORT221_FN4), \
+ PINMUX_DATA(MSIOF0L_RXD_MARK, PORT221_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(VIO2_HD3_MARK, PORT221_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_1), \
+ PINMUX_DATA(PORT221_LCD2HSYN_MARK, PORT221_FN7),
+ PINMUX_DATA(LCDDON_MARK, PORT222_FN1), \
+ PINMUX_DATA(LCDDON2_MARK, PORT222_FN2), \
+ PINMUX_DATA(DACK1_MARK, PORT222_FN3), \
+ PINMUX_DATA(OVCN_MARK, PORT222_FN4), \
+ PINMUX_DATA(MSIOF0L_TXD_MARK, PORT222_FN5, MSEL3CR_MSEL11_1), \
+ PINMUX_DATA(VIO2_VD3_MARK, PORT222_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_1), \
+ PINMUX_DATA(PORT222_LCD2VSYN_MARK, PORT222_FN7, MSEL3CR_MSEL2_1),
+
+ PINMUX_DATA(SCIFA1_TXD_MARK, PORT225_FN2), \
+ PINMUX_DATA(OVCN2_MARK, PORT225_FN4),
+ PINMUX_DATA(EXTLP_MARK, PORT226_FN1), \
+ PINMUX_DATA(SCIFA1_SCK_MARK, PORT226_FN2), \
+ PINMUX_DATA(PORT226_VIO_CKO2_MARK, PORT226_FN5),
+ PINMUX_DATA(SCIFA1_RTS__MARK, PORT227_FN2), \
+ PINMUX_DATA(IDIN_MARK, PORT227_FN4),
+ PINMUX_DATA(SCIFA1_RXD_MARK, PORT228_FN2),
+ PINMUX_DATA(SCIFA1_CTS__MARK, PORT229_FN2), \
+ PINMUX_DATA(MFG1_IN1_MARK, PORT229_FN3),
+ PINMUX_DATA(MSIOF1_TXD_MARK, PORT230_FN1), \
+ PINMUX_DATA(SCIFA2_TXD2_MARK, PORT230_FN2, MSEL3CR_MSEL9_1),
+ PINMUX_DATA(MSIOF1_TSYNC_MARK, PORT231_FN1), \
+ PINMUX_DATA(SCIFA2_CTS2__MARK, PORT231_FN2, MSEL3CR_MSEL9_1),
+ PINMUX_DATA(MSIOF1_TSCK_MARK, PORT232_FN1), \
+ PINMUX_DATA(SCIFA2_SCK2_MARK, PORT232_FN2, MSEL3CR_MSEL9_1),
+ PINMUX_DATA(MSIOF1_RXD_MARK, PORT233_FN1), \
+ PINMUX_DATA(SCIFA2_RXD2_MARK, PORT233_FN2, MSEL3CR_MSEL9_1),
+ PINMUX_DATA(MSIOF1_RSCK_MARK, PORT234_FN1), \
+ PINMUX_DATA(SCIFA2_RTS2__MARK, PORT234_FN2, MSEL3CR_MSEL9_1), \
+ PINMUX_DATA(VIO2_CLK2_MARK, PORT234_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0), \
+ PINMUX_DATA(LCD2D20_MARK, PORT234_FN7),
+ PINMUX_DATA(MSIOF1_RSYNC_MARK, PORT235_FN1), \
+ PINMUX_DATA(MFG1_IN2_MARK, PORT235_FN3), \
+ PINMUX_DATA(VIO2_VD2_MARK, PORT235_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0), \
+ PINMUX_DATA(LCD2D21_MARK, PORT235_FN7),
+ PINMUX_DATA(MSIOF1_MCK0_MARK, PORT236_FN1), \
+ PINMUX_DATA(PORT236_I2C_SDA2_MARK, PORT236_FN2, MSEL2CR_MSEL17_0,
+ MSEL2CR_MSEL16_0),
+ PINMUX_DATA(MSIOF1_MCK1_MARK, PORT237_FN1), \
+ PINMUX_DATA(PORT237_I2C_SCL2_MARK, PORT237_FN2, MSEL2CR_MSEL17_0,
+ MSEL2CR_MSEL16_0),
+ PINMUX_DATA(MSIOF1_SS1_MARK, PORT238_FN1), \
+ PINMUX_DATA(VIO2_FIELD2_MARK, PORT238_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0), \
+ PINMUX_DATA(LCD2D22_MARK, PORT238_FN7),
+ PINMUX_DATA(MSIOF1_SS2_MARK, PORT239_FN1), \
+ PINMUX_DATA(VIO2_HD2_MARK, PORT239_FN6, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0), \
+ PINMUX_DATA(LCD2D23_MARK, PORT239_FN7),
+ PINMUX_DATA(SCIFA6_TXD_MARK, PORT240_FN1),
+ PINMUX_DATA(PORT241_IRDA_OUT_MARK, PORT241_FN1, MSEL4CR_MSEL19_0), \
+ PINMUX_DATA(PORT241_IROUT_MARK, PORT241_FN2), \
+ PINMUX_DATA(MFG4_OUT1_MARK, PORT241_FN3), \
+ PINMUX_DATA(TPU4TO0_MARK, PORT241_FN4),
+ PINMUX_DATA(PORT242_IRDA_IN_MARK, PORT242_FN1, MSEL4CR_MSEL19_0), \
+ PINMUX_DATA(MFG4_IN2_MARK, PORT242_FN3),
+ PINMUX_DATA(PORT243_IRDA_FIRSEL_MARK, PORT243_FN1, MSEL4CR_MSEL19_0), \
+ PINMUX_DATA(PORT243_VIO_CKO2_MARK, PORT243_FN2),
+ PINMUX_DATA(PORT244_SCIFA5_CTS__MARK, PORT244_FN1, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_0), \
+ PINMUX_DATA(MFG2_IN1_MARK, PORT244_FN2), \
+ PINMUX_DATA(PORT244_SCIFB_CTS__MARK, PORT244_FN3, MSEL4CR_MSEL22_1), \
+ PINMUX_DATA(MSIOF2R_RXD_MARK, PORT244_FN7, MSEL4CR_MSEL11_1),
+ PINMUX_DATA(PORT245_SCIFA5_RTS__MARK, PORT245_FN1, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_0), \
+ PINMUX_DATA(MFG2_IN2_MARK, PORT245_FN2), \
+ PINMUX_DATA(PORT245_SCIFB_RTS__MARK, PORT245_FN3, MSEL4CR_MSEL22_1), \
+ PINMUX_DATA(MSIOF2R_TXD_MARK, PORT245_FN7, MSEL4CR_MSEL11_1),
+ PINMUX_DATA(PORT246_SCIFA5_RXD_MARK, PORT246_FN1, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_0), \
+ PINMUX_DATA(MFG1_OUT1_MARK, PORT246_FN2), \
+ PINMUX_DATA(PORT246_SCIFB_RXD_MARK, PORT246_FN3, MSEL4CR_MSEL22_1), \
+ PINMUX_DATA(TPU1TO0_MARK, PORT246_FN4),
+ PINMUX_DATA(PORT247_SCIFA5_TXD_MARK, PORT247_FN1, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_0), \
+ PINMUX_DATA(MFG3_OUT2_MARK, PORT247_FN2), \
+ PINMUX_DATA(PORT247_SCIFB_TXD_MARK, PORT247_FN3, MSEL4CR_MSEL22_1), \
+ PINMUX_DATA(TPU3TO1_MARK, PORT247_FN4),
+ PINMUX_DATA(PORT248_SCIFA5_SCK_MARK, PORT248_FN1, MSEL4CR_MSEL21_0,
+ MSEL4CR_MSEL20_0), \
+ PINMUX_DATA(MFG2_OUT1_MARK, PORT248_FN2), \
+ PINMUX_DATA(PORT248_SCIFB_SCK_MARK, PORT248_FN3, MSEL4CR_MSEL22_1), \
+ PINMUX_DATA(TPU2TO0_MARK, PORT248_FN4), \
+ PINMUX_DATA(PORT248_I2C_SCL3_MARK, PORT248_FN5, MSEL2CR_MSEL19_0,
+ MSEL2CR_MSEL18_0), \
+ PINMUX_DATA(MSIOF2R_TSCK_MARK, PORT248_FN7, MSEL4CR_MSEL11_1),
+ PINMUX_DATA(PORT249_IROUT_MARK, PORT249_FN1), \
+ PINMUX_DATA(MFG4_IN1_MARK, PORT249_FN2), \
+ PINMUX_DATA(PORT249_I2C_SDA3_MARK, PORT249_FN5, MSEL2CR_MSEL19_0,
+ MSEL2CR_MSEL18_0), \
+ PINMUX_DATA(MSIOF2R_TSYNC_MARK, PORT249_FN7, MSEL4CR_MSEL11_1),
+ PINMUX_DATA(SDHICLK0_MARK, PORT250_FN1),
+ PINMUX_DATA(SDHICD0_MARK, PORT251_FN1),
+ PINMUX_DATA(SDHID0_0_MARK, PORT252_FN1),
+ PINMUX_DATA(SDHID0_1_MARK, PORT253_FN1),
+ PINMUX_DATA(SDHID0_2_MARK, PORT254_FN1),
+ PINMUX_DATA(SDHID0_3_MARK, PORT255_FN1),
+ PINMUX_DATA(SDHICMD0_MARK, PORT256_FN1),
+ PINMUX_DATA(SDHIWP0_MARK, PORT257_FN1),
+ PINMUX_DATA(SDHICLK1_MARK, PORT258_FN1),
+ PINMUX_DATA(SDHID1_0_MARK, PORT259_FN1), \
+ PINMUX_DATA(TS_SPSYNC2_MARK, PORT259_FN3),
+ PINMUX_DATA(SDHID1_1_MARK, PORT260_FN1), \
+ PINMUX_DATA(TS_SDAT2_MARK, PORT260_FN3),
+ PINMUX_DATA(SDHID1_2_MARK, PORT261_FN1), \
+ PINMUX_DATA(TS_SDEN2_MARK, PORT261_FN3),
+ PINMUX_DATA(SDHID1_3_MARK, PORT262_FN1), \
+ PINMUX_DATA(TS_SCK2_MARK, PORT262_FN3),
+ PINMUX_DATA(SDHICMD1_MARK, PORT263_FN1),
+ PINMUX_DATA(SDHICLK2_MARK, PORT264_FN1),
+ PINMUX_DATA(SDHID2_0_MARK, PORT265_FN1), \
+ PINMUX_DATA(TS_SPSYNC4_MARK, PORT265_FN3),
+ PINMUX_DATA(SDHID2_1_MARK, PORT266_FN1), \
+ PINMUX_DATA(TS_SDAT4_MARK, PORT266_FN3),
+ PINMUX_DATA(SDHID2_2_MARK, PORT267_FN1), \
+ PINMUX_DATA(TS_SDEN4_MARK, PORT267_FN3),
+ PINMUX_DATA(SDHID2_3_MARK, PORT268_FN1), \
+ PINMUX_DATA(TS_SCK4_MARK, PORT268_FN3),
+ PINMUX_DATA(SDHICMD2_MARK, PORT269_FN1),
+ PINMUX_DATA(MMCCLK0_MARK, PORT270_FN1, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_0_MARK, PORT271_FN1, PORT271_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_MARK, PORT272_FN1, PORT272_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_MARK, PORT273_FN1, PORT273_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_MARK, PORT274_FN1, PORT274_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_MARK, PORT275_FN1, PORT275_IN_PU,
+ MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(TS_SPSYNC5_MARK, PORT275_FN3),
+ PINMUX_DATA(MMCD0_5_MARK, PORT276_FN1, PORT276_IN_PU,
+ MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(TS_SDAT5_MARK, PORT276_FN3),
+ PINMUX_DATA(MMCD0_6_MARK, PORT277_FN1, PORT277_IN_PU,
+ MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(TS_SDEN5_MARK, PORT277_FN3),
+ PINMUX_DATA(MMCD0_7_MARK, PORT278_FN1, PORT278_IN_PU,
+ MSEL4CR_MSEL15_0), \
+ PINMUX_DATA(TS_SCK5_MARK, PORT278_FN3),
+ PINMUX_DATA(MMCCMD0_MARK, PORT279_FN1, PORT279_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(RESETOUTS__MARK, PORT281_FN1), \
+ PINMUX_DATA(EXTAL2OUT_MARK, PORT281_FN2),
+ PINMUX_DATA(MCP_WAIT__MCP_FRB_MARK, PORT288_FN1),
+ PINMUX_DATA(MCP_CKO_MARK, PORT289_FN1), \
+ PINMUX_DATA(MMCCLK1_MARK, PORT289_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D15_MCP_NAF15_MARK, PORT290_FN1),
+ PINMUX_DATA(MCP_D14_MCP_NAF14_MARK, PORT291_FN1),
+ PINMUX_DATA(MCP_D13_MCP_NAF13_MARK, PORT292_FN1),
+ PINMUX_DATA(MCP_D12_MCP_NAF12_MARK, PORT293_FN1),
+ PINMUX_DATA(MCP_D11_MCP_NAF11_MARK, PORT294_FN1),
+ PINMUX_DATA(MCP_D10_MCP_NAF10_MARK, PORT295_FN1),
+ PINMUX_DATA(MCP_D9_MCP_NAF9_MARK, PORT296_FN1),
+ PINMUX_DATA(MCP_D8_MCP_NAF8_MARK, PORT297_FN1), \
+ PINMUX_DATA(MMCCMD1_MARK, PORT297_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D7_MCP_NAF7_MARK, PORT298_FN1), \
+ PINMUX_DATA(MMCD1_7_MARK, PORT298_FN2, MSEL4CR_MSEL15_1),
+
+ PINMUX_DATA(MCP_D6_MCP_NAF6_MARK, PORT299_FN1), \
+ PINMUX_DATA(MMCD1_6_MARK, PORT299_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D5_MCP_NAF5_MARK, PORT300_FN1), \
+ PINMUX_DATA(MMCD1_5_MARK, PORT300_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D4_MCP_NAF4_MARK, PORT301_FN1), \
+ PINMUX_DATA(MMCD1_4_MARK, PORT301_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D3_MCP_NAF3_MARK, PORT302_FN1), \
+ PINMUX_DATA(MMCD1_3_MARK, PORT302_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D2_MCP_NAF2_MARK, PORT303_FN1), \
+ PINMUX_DATA(MMCD1_2_MARK, PORT303_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D1_MCP_NAF1_MARK, PORT304_FN1), \
+ PINMUX_DATA(MMCD1_1_MARK, PORT304_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_D0_MCP_NAF0_MARK, PORT305_FN1), \
+ PINMUX_DATA(MMCD1_0_MARK, PORT305_FN2, MSEL4CR_MSEL15_1),
+ PINMUX_DATA(MCP_NBRSTOUT__MARK, PORT306_FN1),
+ PINMUX_DATA(MCP_WE0__MCP_FWE_MARK, PORT309_FN1), \
+ PINMUX_DATA(MCP_RDWR_MCP_FWE_MARK, PORT309_FN2),
+
+ /* MSEL2 special cases */
+ PINMUX_DATA(TSIF2_TS_XX1_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+ MSEL2CR_MSEL12_0),
+ PINMUX_DATA(TSIF2_TS_XX2_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_0,
+ MSEL2CR_MSEL12_1),
+ PINMUX_DATA(TSIF2_TS_XX3_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+ MSEL2CR_MSEL12_0),
+ PINMUX_DATA(TSIF2_TS_XX4_MARK, MSEL2CR_MSEL14_0, MSEL2CR_MSEL13_1,
+ MSEL2CR_MSEL12_1),
+ PINMUX_DATA(TSIF2_TS_XX5_MARK, MSEL2CR_MSEL14_1, MSEL2CR_MSEL13_0,
+ MSEL2CR_MSEL12_0),
+ PINMUX_DATA(TSIF1_TS_XX1_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+ MSEL2CR_MSEL9_0),
+ PINMUX_DATA(TSIF1_TS_XX2_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_0,
+ MSEL2CR_MSEL9_1),
+ PINMUX_DATA(TSIF1_TS_XX3_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+ MSEL2CR_MSEL9_0),
+ PINMUX_DATA(TSIF1_TS_XX4_MARK, MSEL2CR_MSEL11_0, MSEL2CR_MSEL10_1,
+ MSEL2CR_MSEL9_1),
+ PINMUX_DATA(TSIF1_TS_XX5_MARK, MSEL2CR_MSEL11_1, MSEL2CR_MSEL10_0,
+ MSEL2CR_MSEL9_0),
+ PINMUX_DATA(TSIF0_TS_XX1_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+ MSEL2CR_MSEL6_0),
+ PINMUX_DATA(TSIF0_TS_XX2_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_0,
+ MSEL2CR_MSEL6_1),
+ PINMUX_DATA(TSIF0_TS_XX3_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+ MSEL2CR_MSEL6_0),
+ PINMUX_DATA(TSIF0_TS_XX4_MARK, MSEL2CR_MSEL8_0, MSEL2CR_MSEL7_1,
+ MSEL2CR_MSEL6_1),
+ PINMUX_DATA(TSIF0_TS_XX5_MARK, MSEL2CR_MSEL8_1, MSEL2CR_MSEL7_0,
+ MSEL2CR_MSEL6_0),
+ PINMUX_DATA(MST1_TS_XX1_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+ MSEL2CR_MSEL3_0),
+ PINMUX_DATA(MST1_TS_XX2_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_0,
+ MSEL2CR_MSEL3_1),
+ PINMUX_DATA(MST1_TS_XX3_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+ MSEL2CR_MSEL3_0),
+ PINMUX_DATA(MST1_TS_XX4_MARK, MSEL2CR_MSEL5_0, MSEL2CR_MSEL4_1,
+ MSEL2CR_MSEL3_1),
+ PINMUX_DATA(MST1_TS_XX5_MARK, MSEL2CR_MSEL5_1, MSEL2CR_MSEL4_0,
+ MSEL2CR_MSEL3_0),
+ PINMUX_DATA(MST0_TS_XX1_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+ MSEL2CR_MSEL0_0),
+ PINMUX_DATA(MST0_TS_XX2_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_0,
+ MSEL2CR_MSEL0_1),
+ PINMUX_DATA(MST0_TS_XX3_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+ MSEL2CR_MSEL0_0),
+ PINMUX_DATA(MST0_TS_XX4_MARK, MSEL2CR_MSEL2_0, MSEL2CR_MSEL1_1,
+ MSEL2CR_MSEL0_1),
+ PINMUX_DATA(MST0_TS_XX5_MARK, MSEL2CR_MSEL2_1, MSEL2CR_MSEL1_0,
+ MSEL2CR_MSEL0_0),
+
+ /* MSEL3 special cases */
+ PINMUX_DATA(SDHI0_VCCQ_MC0_ON_MARK, MSEL3CR_MSEL28_1),
+ PINMUX_DATA(SDHI0_VCCQ_MC0_OFF_MARK, MSEL3CR_MSEL28_0),
+ PINMUX_DATA(DEBUG_MON_VIO_MARK, MSEL3CR_MSEL15_0),
+ PINMUX_DATA(DEBUG_MON_LCDD_MARK, MSEL3CR_MSEL15_1),
+ PINMUX_DATA(LCDC_LCDC0_MARK, MSEL3CR_MSEL6_0),
+ PINMUX_DATA(LCDC_LCDC1_MARK, MSEL3CR_MSEL6_1),
+
+ /* MSEL4 special cases */
+ PINMUX_DATA(IRQ9_MEM_INT_MARK, MSEL4CR_MSEL29_0),
+ PINMUX_DATA(IRQ9_MCP_INT_MARK, MSEL4CR_MSEL29_1),
+ PINMUX_DATA(A11_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_0),
+ PINMUX_DATA(KEYOUT8_MARK, MSEL4CR_MSEL13_0, MSEL4CR_MSEL12_1),
+ PINMUX_DATA(TPU4TO3_MARK, MSEL4CR_MSEL13_1, MSEL4CR_MSEL12_0),
+ PINMUX_DATA(RESETA_N_PU_ON_MARK, MSEL4CR_MSEL4_0),
+ PINMUX_DATA(RESETA_N_PU_OFF_MARK, MSEL4CR_MSEL4_1),
+ PINMUX_DATA(EDBGREQ_PD_MARK, MSEL4CR_MSEL1_0),
+ PINMUX_DATA(EDBGREQ_PU_MARK, MSEL4CR_MSEL1_1),
+
+ /* Functions with pull-ups */
+ PINMUX_DATA(KEYIN0_PU_MARK, PORT66_FN2, PORT66_IN_PU),
+ PINMUX_DATA(KEYIN1_PU_MARK, PORT67_FN2, PORT67_IN_PU),
+ PINMUX_DATA(KEYIN2_PU_MARK, PORT68_FN2, PORT68_IN_PU),
+ PINMUX_DATA(KEYIN3_PU_MARK, PORT69_FN2, PORT69_IN_PU),
+ PINMUX_DATA(KEYIN4_PU_MARK, PORT70_FN2, PORT70_IN_PU),
+ PINMUX_DATA(KEYIN5_PU_MARK, PORT71_FN2, PORT71_IN_PU),
+ PINMUX_DATA(KEYIN6_PU_MARK, PORT72_FN2, PORT72_IN_PU),
+ PINMUX_DATA(KEYIN7_PU_MARK, PORT73_FN2, PORT73_IN_PU),
+
+ PINMUX_DATA(SDHICD0_PU_MARK, PORT251_FN1, PORT251_IN_PU),
+ PINMUX_DATA(SDHID0_0_PU_MARK, PORT252_FN1, PORT252_IN_PU),
+ PINMUX_DATA(SDHID0_1_PU_MARK, PORT253_FN1, PORT253_IN_PU),
+ PINMUX_DATA(SDHID0_2_PU_MARK, PORT254_FN1, PORT254_IN_PU),
+ PINMUX_DATA(SDHID0_3_PU_MARK, PORT255_FN1, PORT255_IN_PU),
+ PINMUX_DATA(SDHICMD0_PU_MARK, PORT256_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHIWP0_PU_MARK, PORT257_FN1, PORT256_IN_PU),
+ PINMUX_DATA(SDHID1_0_PU_MARK, PORT259_FN1, PORT259_IN_PU),
+ PINMUX_DATA(SDHID1_1_PU_MARK, PORT260_FN1, PORT260_IN_PU),
+ PINMUX_DATA(SDHID1_2_PU_MARK, PORT261_FN1, PORT261_IN_PU),
+ PINMUX_DATA(SDHID1_3_PU_MARK, PORT262_FN1, PORT262_IN_PU),
+ PINMUX_DATA(SDHICMD1_PU_MARK, PORT263_FN1, PORT263_IN_PU),
+ PINMUX_DATA(SDHID2_0_PU_MARK, PORT265_FN1, PORT265_IN_PU),
+ PINMUX_DATA(SDHID2_1_PU_MARK, PORT266_FN1, PORT266_IN_PU),
+ PINMUX_DATA(SDHID2_2_PU_MARK, PORT267_FN1, PORT267_IN_PU),
+ PINMUX_DATA(SDHID2_3_PU_MARK, PORT268_FN1, PORT268_IN_PU),
+ PINMUX_DATA(SDHICMD2_PU_MARK, PORT269_FN1, PORT269_IN_PU),
+
+ PINMUX_DATA(MMCCMD0_PU_MARK, PORT279_FN1, PORT279_IN_PU,
+ MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCCMD1_PU_MARK, PORT297_FN2, PORT297_IN_PU,
+ MSEL4CR_MSEL15_1),
+
+ PINMUX_DATA(MMCD0_0_PU_MARK,
+ PORT271_FN1, PORT271_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_1_PU_MARK,
+ PORT272_FN1, PORT272_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_2_PU_MARK,
+ PORT273_FN1, PORT273_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_3_PU_MARK,
+ PORT274_FN1, PORT274_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_4_PU_MARK,
+ PORT275_FN1, PORT275_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_5_PU_MARK,
+ PORT276_FN1, PORT276_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_6_PU_MARK,
+ PORT277_FN1, PORT277_IN_PU, MSEL4CR_MSEL15_0),
+ PINMUX_DATA(MMCD0_7_PU_MARK,
+ PORT278_FN1, PORT278_IN_PU, MSEL4CR_MSEL15_0),
+
+ PINMUX_DATA(FSIBISLD_PU_MARK, PORT39_FN1, PORT39_IN_PU),
+ PINMUX_DATA(FSIACK_PU_MARK, PORT49_FN1, PORT49_IN_PU),
+ PINMUX_DATA(FSIAILR_PU_MARK, PORT50_FN5, PORT50_IN_PU),
+ PINMUX_DATA(FSIAIBT_PU_MARK, PORT51_FN5, PORT51_IN_PU),
+ PINMUX_DATA(FSIAISLD_PU_MARK, PORT55_FN1, PORT55_IN_PU),
+};
+
+static struct pinmux_gpio pinmux_gpios[] = {
+ GPIO_PORT_ALL(),
+
+ /* Table 25-1 (Functions 0-7) */
+ GPIO_FN(VBUS_0),
+ GPIO_FN(GPI0),
+ GPIO_FN(GPI1),
+ GPIO_FN(GPI2),
+ GPIO_FN(GPI3),
+ GPIO_FN(GPI4),
+ GPIO_FN(GPI5),
+ GPIO_FN(GPI6),
+ GPIO_FN(GPI7),
+ GPIO_FN(SCIFA7_RXD),
+ GPIO_FN(SCIFA7_CTS_),
+ GPIO_FN(GPO7), \
+ GPIO_FN(MFG0_OUT2),
+ GPIO_FN(GPO6), \
+ GPIO_FN(MFG1_OUT2),
+ GPIO_FN(GPO5), \
+ GPIO_FN(SCIFA0_SCK), \
+ GPIO_FN(FSICOSLDT3), \
+ GPIO_FN(PORT16_VIO_CKOR),
+ GPIO_FN(SCIFA0_TXD),
+ GPIO_FN(SCIFA7_TXD),
+ GPIO_FN(SCIFA7_RTS_), \
+ GPIO_FN(PORT19_VIO_CKO2),
+ GPIO_FN(GPO0),
+ GPIO_FN(GPO1),
+ GPIO_FN(GPO2), \
+ GPIO_FN(STATUS0),
+ GPIO_FN(GPO3), \
+ GPIO_FN(STATUS1),
+ GPIO_FN(GPO4), \
+ GPIO_FN(STATUS2),
+ GPIO_FN(VINT),
+ GPIO_FN(TCKON),
+ GPIO_FN(XDVFS1), \
+ GPIO_FN(PORT27_I2C_SCL2), \
+ GPIO_FN(PORT27_I2C_SCL3), \
+ GPIO_FN(MFG0_OUT1), \
+ GPIO_FN(PORT27_IROUT),
+ GPIO_FN(XDVFS2), \
+ GPIO_FN(PORT28_I2C_SDA2), \
+ GPIO_FN(PORT28_I2C_SDA3), \
+ GPIO_FN(PORT28_TPU1TO1),
+ GPIO_FN(SIM_RST), \
+ GPIO_FN(PORT29_TPU1TO1),
+ GPIO_FN(SIM_CLK), \
+ GPIO_FN(PORT30_VIO_CKOR),
+ GPIO_FN(SIM_D), \
+ GPIO_FN(PORT31_IROUT),
+ GPIO_FN(SCIFA4_TXD),
+ GPIO_FN(SCIFA4_RXD), \
+ GPIO_FN(XWUP),
+ GPIO_FN(SCIFA4_RTS_),
+ GPIO_FN(SCIFA4_CTS_),
+ GPIO_FN(FSIBOBT), \
+ GPIO_FN(FSIBIBT),
+ GPIO_FN(FSIBOLR), \
+ GPIO_FN(FSIBILR),
+ GPIO_FN(FSIBOSLD),
+ GPIO_FN(FSIBISLD),
+ GPIO_FN(VACK),
+ GPIO_FN(XTAL1L),
+ GPIO_FN(SCIFA0_RTS_), \
+ GPIO_FN(FSICOSLDT2),
+ GPIO_FN(SCIFA0_RXD),
+ GPIO_FN(SCIFA0_CTS_), \
+ GPIO_FN(FSICOSLDT1),
+ GPIO_FN(FSICOBT), \
+ GPIO_FN(FSICIBT), \
+ GPIO_FN(FSIDOBT), \
+ GPIO_FN(FSIDIBT),
+ GPIO_FN(FSICOLR), \
+ GPIO_FN(FSICILR), \
+ GPIO_FN(FSIDOLR), \
+ GPIO_FN(FSIDILR),
+ GPIO_FN(FSICOSLD), \
+ GPIO_FN(PORT47_FSICSPDIF),
+ GPIO_FN(FSICISLD), \
+ GPIO_FN(FSIDISLD),
+ GPIO_FN(FSIACK), \
+ GPIO_FN(PORT49_IRDA_OUT), \
+ GPIO_FN(PORT49_IROUT), \
+ GPIO_FN(FSIAOMC),
+ GPIO_FN(FSIAOLR), \
+ GPIO_FN(BBIF2_TSYNC2), \
+ GPIO_FN(TPU2TO2), \
+ GPIO_FN(FSIAILR),
+
+ GPIO_FN(FSIAOBT), \
+ GPIO_FN(BBIF2_TSCK2), \
+ GPIO_FN(TPU2TO3), \
+ GPIO_FN(FSIAIBT),
+ GPIO_FN(FSIAOSLD), \
+ GPIO_FN(BBIF2_TXD2),
+ GPIO_FN(FSIASPDIF), \
+ GPIO_FN(PORT53_IRDA_IN), \
+ GPIO_FN(TPU3TO3), \
+ GPIO_FN(FSIBSPDIF), \
+ GPIO_FN(PORT53_FSICSPDIF),
+ GPIO_FN(FSIBCK), \
+ GPIO_FN(PORT54_IRDA_FIRSEL), \
+ GPIO_FN(TPU3TO2), \
+ GPIO_FN(FSIBOMC), \
+ GPIO_FN(FSICCK), \
+ GPIO_FN(FSICOMC),
+ GPIO_FN(FSIAISLD), \
+ GPIO_FN(TPU0TO0),
+ GPIO_FN(A0), \
+ GPIO_FN(BS_),
+ GPIO_FN(A12), \
+ GPIO_FN(PORT58_KEYOUT7), \
+ GPIO_FN(TPU4TO2),
+ GPIO_FN(A13), \
+ GPIO_FN(PORT59_KEYOUT6), \
+ GPIO_FN(TPU0TO1),
+ GPIO_FN(A14), \
+ GPIO_FN(KEYOUT5),
+ GPIO_FN(A15), \
+ GPIO_FN(KEYOUT4),
+ GPIO_FN(A16), \
+ GPIO_FN(KEYOUT3), \
+ GPIO_FN(MSIOF0_SS1),
+ GPIO_FN(A17), \
+ GPIO_FN(KEYOUT2), \
+ GPIO_FN(MSIOF0_TSYNC),
+ GPIO_FN(A18), \
+ GPIO_FN(KEYOUT1), \
+ GPIO_FN(MSIOF0_TSCK),
+ GPIO_FN(A19), \
+ GPIO_FN(KEYOUT0), \
+ GPIO_FN(MSIOF0_TXD),
+ GPIO_FN(A20), \
+ GPIO_FN(KEYIN0), \
+ GPIO_FN(MSIOF0_RSCK),
+ GPIO_FN(A21), \
+ GPIO_FN(KEYIN1), \
+ GPIO_FN(MSIOF0_RSYNC),
+ GPIO_FN(A22), \
+ GPIO_FN(KEYIN2), \
+ GPIO_FN(MSIOF0_MCK0),
+ GPIO_FN(A23), \
+ GPIO_FN(KEYIN3), \
+ GPIO_FN(MSIOF0_MCK1),
+ GPIO_FN(A24), \
+ GPIO_FN(KEYIN4), \
+ GPIO_FN(MSIOF0_RXD),
+ GPIO_FN(A25), \
+ GPIO_FN(KEYIN5), \
+ GPIO_FN(MSIOF0_SS2),
+ GPIO_FN(A26), \
+ GPIO_FN(KEYIN6),
+ GPIO_FN(KEYIN7),
+ GPIO_FN(D0_NAF0),
+ GPIO_FN(D1_NAF1),
+ GPIO_FN(D2_NAF2),
+ GPIO_FN(D3_NAF3),
+ GPIO_FN(D4_NAF4),
+ GPIO_FN(D5_NAF5),
+ GPIO_FN(D6_NAF6),
+ GPIO_FN(D7_NAF7),
+ GPIO_FN(D8_NAF8),
+ GPIO_FN(D9_NAF9),
+ GPIO_FN(D10_NAF10),
+ GPIO_FN(D11_NAF11),
+ GPIO_FN(D12_NAF12),
+ GPIO_FN(D13_NAF13),
+ GPIO_FN(D14_NAF14),
+ GPIO_FN(D15_NAF15),
+ GPIO_FN(CS4_),
+ GPIO_FN(CS5A_), \
+ GPIO_FN(PORT91_RDWR),
+ GPIO_FN(CS5B_), \
+ GPIO_FN(FCE1_),
+ GPIO_FN(CS6B_), \
+ GPIO_FN(DACK0),
+ GPIO_FN(FCE0_), \
+ GPIO_FN(CS6A_),
+ GPIO_FN(WAIT_), \
+ GPIO_FN(DREQ0),
+ GPIO_FN(RD__FSC),
+ GPIO_FN(WE0__FWE), \
+ GPIO_FN(RDWR_FWE),
+ GPIO_FN(WE1_),
+ GPIO_FN(FRB),
+ GPIO_FN(CKO),
+ GPIO_FN(NBRSTOUT_),
+ GPIO_FN(NBRST_),
+ GPIO_FN(BBIF2_TXD),
+ GPIO_FN(BBIF2_RXD),
+ GPIO_FN(BBIF2_SYNC),
+ GPIO_FN(BBIF2_SCK),
+ GPIO_FN(SCIFA3_CTS_), \
+ GPIO_FN(MFG3_IN2),
+ GPIO_FN(SCIFA3_RXD), \
+ GPIO_FN(MFG3_IN1),
+ GPIO_FN(BBIF1_SS2), \
+ GPIO_FN(SCIFA3_RTS_), \
+ GPIO_FN(MFG3_OUT1),
+ GPIO_FN(SCIFA3_TXD),
+ GPIO_FN(HSI_RX_DATA), \
+ GPIO_FN(BBIF1_RXD),
+ GPIO_FN(HSI_TX_WAKE), \
+ GPIO_FN(BBIF1_TSCK),
+ GPIO_FN(HSI_TX_DATA), \
+ GPIO_FN(BBIF1_TSYNC),
+ GPIO_FN(HSI_TX_READY), \
+ GPIO_FN(BBIF1_TXD),
+ GPIO_FN(HSI_RX_READY), \
+ GPIO_FN(BBIF1_RSCK), \
+ GPIO_FN(PORT115_I2C_SCL2), \
+ GPIO_FN(PORT115_I2C_SCL3),
+ GPIO_FN(HSI_RX_WAKE), \
+ GPIO_FN(BBIF1_RSYNC), \
+ GPIO_FN(PORT116_I2C_SDA2), \
+ GPIO_FN(PORT116_I2C_SDA3),
+ GPIO_FN(HSI_RX_FLAG), \
+ GPIO_FN(BBIF1_SS1), \
+ GPIO_FN(BBIF1_FLOW),
+ GPIO_FN(HSI_TX_FLAG),
+ GPIO_FN(VIO_VD), \
+ GPIO_FN(PORT128_LCD2VSYN), \
+ GPIO_FN(VIO2_VD), \
+ GPIO_FN(LCD2D0),
+
+ GPIO_FN(VIO_HD), \
+ GPIO_FN(PORT129_LCD2HSYN), \
+ GPIO_FN(PORT129_LCD2CS_), \
+ GPIO_FN(VIO2_HD), \
+ GPIO_FN(LCD2D1),
+ GPIO_FN(VIO_D0), \
+ GPIO_FN(PORT130_MSIOF2_RXD), \
+ GPIO_FN(LCD2D10),
+ GPIO_FN(VIO_D1), \
+ GPIO_FN(PORT131_KEYOUT6), \
+ GPIO_FN(PORT131_MSIOF2_SS1), \
+ GPIO_FN(PORT131_KEYOUT11), \
+ GPIO_FN(LCD2D11),
+ GPIO_FN(VIO_D2), \
+ GPIO_FN(PORT132_KEYOUT7), \
+ GPIO_FN(PORT132_MSIOF2_SS2), \
+ GPIO_FN(PORT132_KEYOUT10), \
+ GPIO_FN(LCD2D12),
+ GPIO_FN(VIO_D3), \
+ GPIO_FN(MSIOF2_TSYNC), \
+ GPIO_FN(LCD2D13),
+ GPIO_FN(VIO_D4), \
+ GPIO_FN(MSIOF2_TXD), \
+ GPIO_FN(LCD2D14),
+ GPIO_FN(VIO_D5), \
+ GPIO_FN(MSIOF2_TSCK), \
+ GPIO_FN(LCD2D15),
+ GPIO_FN(VIO_D6), \
+ GPIO_FN(PORT136_KEYOUT8), \
+ GPIO_FN(LCD2D16),
+ GPIO_FN(VIO_D7), \
+ GPIO_FN(PORT137_KEYOUT9), \
+ GPIO_FN(LCD2D17),
+ GPIO_FN(VIO_D8), \
+ GPIO_FN(PORT138_KEYOUT8), \
+ GPIO_FN(VIO2_D0), \
+ GPIO_FN(LCD2D6),
+ GPIO_FN(VIO_D9), \
+ GPIO_FN(PORT139_KEYOUT9), \
+ GPIO_FN(VIO2_D1), \
+ GPIO_FN(LCD2D7),
+ GPIO_FN(VIO_D10), \
+ GPIO_FN(TPU0TO2), \
+ GPIO_FN(VIO2_D2), \
+ GPIO_FN(LCD2D8),
+ GPIO_FN(VIO_D11), \
+ GPIO_FN(TPU0TO3), \
+ GPIO_FN(VIO2_D3), \
+ GPIO_FN(LCD2D9),
+ GPIO_FN(VIO_D12), \
+ GPIO_FN(PORT142_KEYOUT10), \
+ GPIO_FN(VIO2_D4), \
+ GPIO_FN(LCD2D2),
+ GPIO_FN(VIO_D13), \
+ GPIO_FN(PORT143_KEYOUT11), \
+ GPIO_FN(PORT143_KEYOUT6), \
+ GPIO_FN(VIO2_D5), \
+ GPIO_FN(LCD2D3),
+ GPIO_FN(VIO_D14), \
+ GPIO_FN(PORT144_KEYOUT7), \
+ GPIO_FN(VIO2_D6), \
+ GPIO_FN(LCD2D4),
+ GPIO_FN(VIO_D15), \
+ GPIO_FN(TPU1TO3), \
+ GPIO_FN(PORT145_LCD2DISP), \
+ GPIO_FN(PORT145_LCD2RS), \
+ GPIO_FN(VIO2_D7), \
+ GPIO_FN(LCD2D5),
+ GPIO_FN(VIO_CLK), \
+ GPIO_FN(LCD2DCK), \
+ GPIO_FN(PORT146_LCD2WR_), \
+ GPIO_FN(VIO2_CLK), \
+ GPIO_FN(LCD2D18),
+ GPIO_FN(VIO_FIELD), \
+ GPIO_FN(LCD2RD_), \
+ GPIO_FN(VIO2_FIELD), \
+ GPIO_FN(LCD2D19),
+ GPIO_FN(VIO_CKO),
+ GPIO_FN(A27), \
+ GPIO_FN(PORT149_RDWR), \
+ GPIO_FN(MFG0_IN1), \
+ GPIO_FN(PORT149_KEYOUT9),
+ GPIO_FN(MFG0_IN2),
+ GPIO_FN(TS_SPSYNC3), \
+ GPIO_FN(MSIOF2_RSCK),
+ GPIO_FN(TS_SDAT3), \
+ GPIO_FN(MSIOF2_RSYNC),
+ GPIO_FN(TPU1TO2), \
+ GPIO_FN(TS_SDEN3), \
+ GPIO_FN(PORT153_MSIOF2_SS1),
+ GPIO_FN(SCIFA2_TXD1), \
+ GPIO_FN(MSIOF2_MCK0),
+ GPIO_FN(SCIFA2_RXD1), \
+ GPIO_FN(MSIOF2_MCK1),
+ GPIO_FN(SCIFA2_RTS1_), \
+ GPIO_FN(PORT156_MSIOF2_SS2),
+ GPIO_FN(SCIFA2_CTS1_), \
+ GPIO_FN(PORT157_MSIOF2_RXD),
+ GPIO_FN(DINT_), \
+ GPIO_FN(SCIFA2_SCK1), \
+ GPIO_FN(TS_SCK3),
+ GPIO_FN(PORT159_SCIFB_SCK), \
+ GPIO_FN(PORT159_SCIFA5_SCK), \
+ GPIO_FN(NMI),
+ GPIO_FN(PORT160_SCIFB_TXD), \
+ GPIO_FN(PORT160_SCIFA5_TXD),
+ GPIO_FN(PORT161_SCIFB_CTS_), \
+ GPIO_FN(PORT161_SCIFA5_CTS_),
+ GPIO_FN(PORT162_SCIFB_RXD), \
+ GPIO_FN(PORT162_SCIFA5_RXD),
+ GPIO_FN(PORT163_SCIFB_RTS_), \
+ GPIO_FN(PORT163_SCIFA5_RTS_), \
+ GPIO_FN(TPU3TO0),
+ GPIO_FN(LCDD0),
+ GPIO_FN(LCDD1), \
+ GPIO_FN(PORT193_SCIFA5_CTS_), \
+ GPIO_FN(BBIF2_TSYNC1),
+ GPIO_FN(LCDD2), \
+ GPIO_FN(PORT194_SCIFA5_RTS_), \
+ GPIO_FN(BBIF2_TSCK1),
+ GPIO_FN(LCDD3), \
+ GPIO_FN(PORT195_SCIFA5_RXD), \
+ GPIO_FN(BBIF2_TXD1),
+ GPIO_FN(LCDD4), \
+ GPIO_FN(PORT196_SCIFA5_TXD),
+ GPIO_FN(LCDD5), \
+ GPIO_FN(PORT197_SCIFA5_SCK), \
+ GPIO_FN(MFG2_OUT2), \
+ GPIO_FN(TPU2TO1),
+ GPIO_FN(LCDD6),
+ GPIO_FN(LCDD7), \
+ GPIO_FN(TPU4TO1), \
+ GPIO_FN(MFG4_OUT2),
+ GPIO_FN(LCDD8), \
+ GPIO_FN(D16),
+ GPIO_FN(LCDD9), \
+ GPIO_FN(D17),
+ GPIO_FN(LCDD10), \
+ GPIO_FN(D18),
+ GPIO_FN(LCDD11), \
+ GPIO_FN(D19),
+ GPIO_FN(LCDD12), \
+ GPIO_FN(D20),
+ GPIO_FN(LCDD13), \
+ GPIO_FN(D21),
+ GPIO_FN(LCDD14), \
+ GPIO_FN(D22),
+ GPIO_FN(LCDD15), \
+ GPIO_FN(PORT207_MSIOF0L_SS1), \
+ GPIO_FN(D23),
+ GPIO_FN(LCDD16), \
+ GPIO_FN(PORT208_MSIOF0L_SS2), \
+ GPIO_FN(D24),
+ GPIO_FN(LCDD17), \
+ GPIO_FN(D25),
+ GPIO_FN(LCDD18), \
+ GPIO_FN(DREQ2), \
+ GPIO_FN(PORT210_MSIOF0L_SS1), \
+ GPIO_FN(D26),
+ GPIO_FN(LCDD19), \
+ GPIO_FN(PORT211_MSIOF0L_SS2), \
+ GPIO_FN(D27),
+ GPIO_FN(LCDD20), \
+ GPIO_FN(TS_SPSYNC1), \
+ GPIO_FN(MSIOF0L_MCK0), \
+ GPIO_FN(D28),
+ GPIO_FN(LCDD21), \
+ GPIO_FN(TS_SDAT1), \
+ GPIO_FN(MSIOF0L_MCK1), \
+ GPIO_FN(D29),
+ GPIO_FN(LCDD22), \
+ GPIO_FN(TS_SDEN1), \
+ GPIO_FN(MSIOF0L_RSCK), \
+ GPIO_FN(D30),
+ GPIO_FN(LCDD23), \
+ GPIO_FN(TS_SCK1), \
+ GPIO_FN(MSIOF0L_RSYNC), \
+ GPIO_FN(D31),
+ GPIO_FN(LCDDCK), \
+ GPIO_FN(LCDWR_),
+ GPIO_FN(LCDRD_), \
+ GPIO_FN(DACK2), \
+ GPIO_FN(PORT217_LCD2RS), \
+ GPIO_FN(MSIOF0L_TSYNC), \
+ GPIO_FN(VIO2_FIELD3), \
+ GPIO_FN(PORT217_LCD2DISP),
+ GPIO_FN(LCDHSYN), \
+ GPIO_FN(LCDCS_), \
+ GPIO_FN(LCDCS2_), \
+ GPIO_FN(DACK3), \
+ GPIO_FN(PORT218_VIO_CKOR),
+ GPIO_FN(LCDDISP), \
+ GPIO_FN(LCDRS), \
+ GPIO_FN(PORT219_LCD2WR_), \
+ GPIO_FN(DREQ3), \
+ GPIO_FN(MSIOF0L_TSCK), \
+ GPIO_FN(VIO2_CLK3), \
+ GPIO_FN(LCD2DCK_2),
+ GPIO_FN(LCDVSYN), \
+ GPIO_FN(LCDVSYN2),
+ GPIO_FN(LCDLCLK), \
+ GPIO_FN(DREQ1), \
+ GPIO_FN(PORT221_LCD2CS_), \
+ GPIO_FN(PWEN), \
+ GPIO_FN(MSIOF0L_RXD), \
+ GPIO_FN(VIO2_HD3), \
+ GPIO_FN(PORT221_LCD2HSYN),
+ GPIO_FN(LCDDON), \
+ GPIO_FN(LCDDON2), \
+ GPIO_FN(DACK1), \
+ GPIO_FN(OVCN), \
+ GPIO_FN(MSIOF0L_TXD), \
+ GPIO_FN(VIO2_VD3), \
+ GPIO_FN(PORT222_LCD2VSYN),
+
+ GPIO_FN(SCIFA1_TXD), \
+ GPIO_FN(OVCN2),
+ GPIO_FN(EXTLP), \
+ GPIO_FN(SCIFA1_SCK), \
+ GPIO_FN(PORT226_VIO_CKO2),
+ GPIO_FN(SCIFA1_RTS_), \
+ GPIO_FN(IDIN),
+ GPIO_FN(SCIFA1_RXD),
+ GPIO_FN(SCIFA1_CTS_), \
+ GPIO_FN(MFG1_IN1),
+ GPIO_FN(MSIOF1_TXD), \
+ GPIO_FN(SCIFA2_TXD2),
+ GPIO_FN(MSIOF1_TSYNC), \
+ GPIO_FN(SCIFA2_CTS2_),
+ GPIO_FN(MSIOF1_TSCK), \
+ GPIO_FN(SCIFA2_SCK2),
+ GPIO_FN(MSIOF1_RXD), \
+ GPIO_FN(SCIFA2_RXD2),
+ GPIO_FN(MSIOF1_RSCK), \
+ GPIO_FN(SCIFA2_RTS2_), \
+ GPIO_FN(VIO2_CLK2), \
+ GPIO_FN(LCD2D20),
+ GPIO_FN(MSIOF1_RSYNC), \
+ GPIO_FN(MFG1_IN2), \
+ GPIO_FN(VIO2_VD2), \
+ GPIO_FN(LCD2D21),
+ GPIO_FN(MSIOF1_MCK0), \
+ GPIO_FN(PORT236_I2C_SDA2),
+ GPIO_FN(MSIOF1_MCK1), \
+ GPIO_FN(PORT237_I2C_SCL2),
+ GPIO_FN(MSIOF1_SS1), \
+ GPIO_FN(VIO2_FIELD2), \
+ GPIO_FN(LCD2D22),
+ GPIO_FN(MSIOF1_SS2), \
+ GPIO_FN(VIO2_HD2), \
+ GPIO_FN(LCD2D23),
+ GPIO_FN(SCIFA6_TXD),
+ GPIO_FN(PORT241_IRDA_OUT), \
+ GPIO_FN(PORT241_IROUT), \
+ GPIO_FN(MFG4_OUT1), \
+ GPIO_FN(TPU4TO0),
+ GPIO_FN(PORT242_IRDA_IN), \
+ GPIO_FN(MFG4_IN2),
+ GPIO_FN(PORT243_IRDA_FIRSEL), \
+ GPIO_FN(PORT243_VIO_CKO2),
+ GPIO_FN(PORT244_SCIFA5_CTS_), \
+ GPIO_FN(MFG2_IN1), \
+ GPIO_FN(PORT244_SCIFB_CTS_), \
+ GPIO_FN(MSIOF2R_RXD),
+ GPIO_FN(PORT245_SCIFA5_RTS_), \
+ GPIO_FN(MFG2_IN2), \
+ GPIO_FN(PORT245_SCIFB_RTS_), \
+ GPIO_FN(MSIOF2R_TXD),
+ GPIO_FN(PORT246_SCIFA5_RXD), \
+ GPIO_FN(MFG1_OUT1), \
+ GPIO_FN(PORT246_SCIFB_RXD), \
+ GPIO_FN(TPU1TO0),
+ GPIO_FN(PORT247_SCIFA5_TXD), \
+ GPIO_FN(MFG3_OUT2), \
+ GPIO_FN(PORT247_SCIFB_TXD), \
+ GPIO_FN(TPU3TO1),
+ GPIO_FN(PORT248_SCIFA5_SCK), \
+ GPIO_FN(MFG2_OUT1), \
+ GPIO_FN(PORT248_SCIFB_SCK), \
+ GPIO_FN(TPU2TO0), \
+ GPIO_FN(PORT248_I2C_SCL3), \
+ GPIO_FN(MSIOF2R_TSCK),
+ GPIO_FN(PORT249_IROUT), \
+ GPIO_FN(MFG4_IN1), \
+ GPIO_FN(PORT249_I2C_SDA3), \
+ GPIO_FN(MSIOF2R_TSYNC),
+ GPIO_FN(SDHICLK0),
+ GPIO_FN(SDHICD0),
+ GPIO_FN(SDHID0_0),
+ GPIO_FN(SDHID0_1),
+ GPIO_FN(SDHID0_2),
+ GPIO_FN(SDHID0_3),
+ GPIO_FN(SDHICMD0),
+ GPIO_FN(SDHIWP0),
+ GPIO_FN(SDHICLK1),
+ GPIO_FN(SDHID1_0), \
+ GPIO_FN(TS_SPSYNC2),
+ GPIO_FN(SDHID1_1), \
+ GPIO_FN(TS_SDAT2),
+ GPIO_FN(SDHID1_2), \
+ GPIO_FN(TS_SDEN2),
+ GPIO_FN(SDHID1_3), \
+ GPIO_FN(TS_SCK2),
+ GPIO_FN(SDHICMD1),
+ GPIO_FN(SDHICLK2),
+ GPIO_FN(SDHID2_0), \
+ GPIO_FN(TS_SPSYNC4),
+ GPIO_FN(SDHID2_1), \
+ GPIO_FN(TS_SDAT4),
+ GPIO_FN(SDHID2_2), \
+ GPIO_FN(TS_SDEN4),
+ GPIO_FN(SDHID2_3), \
+ GPIO_FN(TS_SCK4),
+ GPIO_FN(SDHICMD2),
+ GPIO_FN(MMCCLK0),
+ GPIO_FN(MMCD0_0),
+ GPIO_FN(MMCD0_1),
+ GPIO_FN(MMCD0_2),
+ GPIO_FN(MMCD0_3),
+ GPIO_FN(MMCD0_4), \
+ GPIO_FN(TS_SPSYNC5),
+ GPIO_FN(MMCD0_5), \
+ GPIO_FN(TS_SDAT5),
+ GPIO_FN(MMCD0_6), \
+ GPIO_FN(TS_SDEN5),
+ GPIO_FN(MMCD0_7), \
+ GPIO_FN(TS_SCK5),
+ GPIO_FN(MMCCMD0),
+ GPIO_FN(RESETOUTS_), \
+ GPIO_FN(EXTAL2OUT),
+ GPIO_FN(MCP_WAIT__MCP_FRB),
+ GPIO_FN(MCP_CKO), \
+ GPIO_FN(MMCCLK1),
+ GPIO_FN(MCP_D15_MCP_NAF15),
+ GPIO_FN(MCP_D14_MCP_NAF14),
+ GPIO_FN(MCP_D13_MCP_NAF13),
+ GPIO_FN(MCP_D12_MCP_NAF12),
+ GPIO_FN(MCP_D11_MCP_NAF11),
+ GPIO_FN(MCP_D10_MCP_NAF10),
+ GPIO_FN(MCP_D9_MCP_NAF9),
+ GPIO_FN(MCP_D8_MCP_NAF8), \
+ GPIO_FN(MMCCMD1),
+ GPIO_FN(MCP_D7_MCP_NAF7), \
+ GPIO_FN(MMCD1_7),
+
+ GPIO_FN(MCP_D6_MCP_NAF6), \
+ GPIO_FN(MMCD1_6),
+ GPIO_FN(MCP_D5_MCP_NAF5), \
+ GPIO_FN(MMCD1_5),
+ GPIO_FN(MCP_D4_MCP_NAF4), \
+ GPIO_FN(MMCD1_4),
+ GPIO_FN(MCP_D3_MCP_NAF3), \
+ GPIO_FN(MMCD1_3),
+ GPIO_FN(MCP_D2_MCP_NAF2), \
+ GPIO_FN(MMCD1_2),
+ GPIO_FN(MCP_D1_MCP_NAF1), \
+ GPIO_FN(MMCD1_1),
+ GPIO_FN(MCP_D0_MCP_NAF0), \
+ GPIO_FN(MMCD1_0),
+ GPIO_FN(MCP_NBRSTOUT_),
+ GPIO_FN(MCP_WE0__MCP_FWE), \
+ GPIO_FN(MCP_RDWR_MCP_FWE),
+
+ /* MSEL2 special cases */
+ GPIO_FN(TSIF2_TS_XX1),
+ GPIO_FN(TSIF2_TS_XX2),
+ GPIO_FN(TSIF2_TS_XX3),
+ GPIO_FN(TSIF2_TS_XX4),
+ GPIO_FN(TSIF2_TS_XX5),
+ GPIO_FN(TSIF1_TS_XX1),
+ GPIO_FN(TSIF1_TS_XX2),
+ GPIO_FN(TSIF1_TS_XX3),
+ GPIO_FN(TSIF1_TS_XX4),
+ GPIO_FN(TSIF1_TS_XX5),
+ GPIO_FN(TSIF0_TS_XX1),
+ GPIO_FN(TSIF0_TS_XX2),
+ GPIO_FN(TSIF0_TS_XX3),
+ GPIO_FN(TSIF0_TS_XX4),
+ GPIO_FN(TSIF0_TS_XX5),
+ GPIO_FN(MST1_TS_XX1),
+ GPIO_FN(MST1_TS_XX2),
+ GPIO_FN(MST1_TS_XX3),
+ GPIO_FN(MST1_TS_XX4),
+ GPIO_FN(MST1_TS_XX5),
+ GPIO_FN(MST0_TS_XX1),
+ GPIO_FN(MST0_TS_XX2),
+ GPIO_FN(MST0_TS_XX3),
+ GPIO_FN(MST0_TS_XX4),
+ GPIO_FN(MST0_TS_XX5),
+
+ /* MSEL3 special cases */
+ GPIO_FN(SDHI0_VCCQ_MC0_ON),
+ GPIO_FN(SDHI0_VCCQ_MC0_OFF),
+ GPIO_FN(DEBUG_MON_VIO),
+ GPIO_FN(DEBUG_MON_LCDD),
+ GPIO_FN(LCDC_LCDC0),
+ GPIO_FN(LCDC_LCDC1),
+
+ /* MSEL4 special cases */
+ GPIO_FN(IRQ9_MEM_INT),
+ GPIO_FN(IRQ9_MCP_INT),
+ GPIO_FN(A11),
+ GPIO_FN(KEYOUT8),
+ GPIO_FN(TPU4TO3),
+ GPIO_FN(RESETA_N_PU_ON),
+ GPIO_FN(RESETA_N_PU_OFF),
+ GPIO_FN(EDBGREQ_PD),
+ GPIO_FN(EDBGREQ_PU),
+
+ /* Functions with pull-ups */
+ GPIO_FN(KEYIN0_PU),
+ GPIO_FN(KEYIN1_PU),
+ GPIO_FN(KEYIN2_PU),
+ GPIO_FN(KEYIN3_PU),
+ GPIO_FN(KEYIN4_PU),
+ GPIO_FN(KEYIN5_PU),
+ GPIO_FN(KEYIN6_PU),
+ GPIO_FN(KEYIN7_PU),
+ GPIO_FN(SDHICD0_PU),
+ GPIO_FN(SDHID0_0_PU),
+ GPIO_FN(SDHID0_1_PU),
+ GPIO_FN(SDHID0_2_PU),
+ GPIO_FN(SDHID0_3_PU),
+ GPIO_FN(SDHICMD0_PU),
+ GPIO_FN(SDHIWP0_PU),
+ GPIO_FN(SDHID1_0_PU),
+ GPIO_FN(SDHID1_1_PU),
+ GPIO_FN(SDHID1_2_PU),
+ GPIO_FN(SDHID1_3_PU),
+ GPIO_FN(SDHICMD1_PU),
+ GPIO_FN(SDHID2_0_PU),
+ GPIO_FN(SDHID2_1_PU),
+ GPIO_FN(SDHID2_2_PU),
+ GPIO_FN(SDHID2_3_PU),
+ GPIO_FN(SDHICMD2_PU),
+ GPIO_FN(MMCCMD0_PU),
+ GPIO_FN(MMCCMD1_PU),
+ GPIO_FN(MMCD0_0_PU),
+ GPIO_FN(MMCD0_1_PU),
+ GPIO_FN(MMCD0_2_PU),
+ GPIO_FN(MMCD0_3_PU),
+ GPIO_FN(MMCD0_4_PU),
+ GPIO_FN(MMCD0_5_PU),
+ GPIO_FN(MMCD0_6_PU),
+ GPIO_FN(MMCD0_7_PU),
+ GPIO_FN(FSIACK_PU),
+ GPIO_FN(FSIAILR_PU),
+ GPIO_FN(FSIAIBT_PU),
+ GPIO_FN(FSIAISLD_PU),
+};
+
+static struct pinmux_cfg_reg pinmux_config_regs[] = {
+ PORTCR(0, 0xe6050000), /* PORT0CR */
+ PORTCR(1, 0xe6050001), /* PORT1CR */
+ PORTCR(2, 0xe6050002), /* PORT2CR */
+ PORTCR(3, 0xe6050003), /* PORT3CR */
+ PORTCR(4, 0xe6050004), /* PORT4CR */
+ PORTCR(5, 0xe6050005), /* PORT5CR */
+ PORTCR(6, 0xe6050006), /* PORT6CR */
+ PORTCR(7, 0xe6050007), /* PORT7CR */
+ PORTCR(8, 0xe6050008), /* PORT8CR */
+ PORTCR(9, 0xe6050009), /* PORT9CR */
+
+ PORTCR(10, 0xe605000a), /* PORT10CR */
+ PORTCR(11, 0xe605000b), /* PORT11CR */
+ PORTCR(12, 0xe605000c), /* PORT12CR */
+ PORTCR(13, 0xe605000d), /* PORT13CR */
+ PORTCR(14, 0xe605000e), /* PORT14CR */
+ PORTCR(15, 0xe605000f), /* PORT15CR */
+ PORTCR(16, 0xe6050010), /* PORT16CR */
+ PORTCR(17, 0xe6050011), /* PORT17CR */
+ PORTCR(18, 0xe6050012), /* PORT18CR */
+ PORTCR(19, 0xe6050013), /* PORT19CR */
+
+ PORTCR(20, 0xe6050014), /* PORT20CR */
+ PORTCR(21, 0xe6050015), /* PORT21CR */
+ PORTCR(22, 0xe6050016), /* PORT22CR */
+ PORTCR(23, 0xe6050017), /* PORT23CR */
+ PORTCR(24, 0xe6050018), /* PORT24CR */
+ PORTCR(25, 0xe6050019), /* PORT25CR */
+ PORTCR(26, 0xe605001a), /* PORT26CR */
+ PORTCR(27, 0xe605001b), /* PORT27CR */
+ PORTCR(28, 0xe605001c), /* PORT28CR */
+ PORTCR(29, 0xe605001d), /* PORT29CR */
+
+ PORTCR(30, 0xe605001e), /* PORT30CR */
+ PORTCR(31, 0xe605001f), /* PORT31CR */
+ PORTCR(32, 0xe6051020), /* PORT32CR */
+ PORTCR(33, 0xe6051021), /* PORT33CR */
+ PORTCR(34, 0xe6051022), /* PORT34CR */
+ PORTCR(35, 0xe6051023), /* PORT35CR */
+ PORTCR(36, 0xe6051024), /* PORT36CR */
+ PORTCR(37, 0xe6051025), /* PORT37CR */
+ PORTCR(38, 0xe6051026), /* PORT38CR */
+ PORTCR(39, 0xe6051027), /* PORT39CR */
+
+ PORTCR(40, 0xe6051028), /* PORT40CR */
+ PORTCR(41, 0xe6051029), /* PORT41CR */
+ PORTCR(42, 0xe605102a), /* PORT42CR */
+ PORTCR(43, 0xe605102b), /* PORT43CR */
+ PORTCR(44, 0xe605102c), /* PORT44CR */
+ PORTCR(45, 0xe605102d), /* PORT45CR */
+ PORTCR(46, 0xe605102e), /* PORT46CR */
+ PORTCR(47, 0xe605102f), /* PORT47CR */
+ PORTCR(48, 0xe6051030), /* PORT48CR */
+ PORTCR(49, 0xe6051031), /* PORT49CR */
+
+ PORTCR(50, 0xe6051032), /* PORT50CR */
+ PORTCR(51, 0xe6051033), /* PORT51CR */
+ PORTCR(52, 0xe6051034), /* PORT52CR */
+ PORTCR(53, 0xe6051035), /* PORT53CR */
+ PORTCR(54, 0xe6051036), /* PORT54CR */
+ PORTCR(55, 0xe6051037), /* PORT55CR */
+ PORTCR(56, 0xe6051038), /* PORT56CR */
+ PORTCR(57, 0xe6051039), /* PORT57CR */
+ PORTCR(58, 0xe605103a), /* PORT58CR */
+ PORTCR(59, 0xe605103b), /* PORT59CR */
+
+ PORTCR(60, 0xe605103c), /* PORT60CR */
+ PORTCR(61, 0xe605103d), /* PORT61CR */
+ PORTCR(62, 0xe605103e), /* PORT62CR */
+ PORTCR(63, 0xe605103f), /* PORT63CR */
+ PORTCR(64, 0xe6051040), /* PORT64CR */
+ PORTCR(65, 0xe6051041), /* PORT65CR */
+ PORTCR(66, 0xe6051042), /* PORT66CR */
+ PORTCR(67, 0xe6051043), /* PORT67CR */
+ PORTCR(68, 0xe6051044), /* PORT68CR */
+ PORTCR(69, 0xe6051045), /* PORT69CR */
+
+ PORTCR(70, 0xe6051046), /* PORT70CR */
+ PORTCR(71, 0xe6051047), /* PORT71CR */
+ PORTCR(72, 0xe6051048), /* PORT72CR */
+ PORTCR(73, 0xe6051049), /* PORT73CR */
+ PORTCR(74, 0xe605104a), /* PORT74CR */
+ PORTCR(75, 0xe605104b), /* PORT75CR */
+ PORTCR(76, 0xe605104c), /* PORT76CR */
+ PORTCR(77, 0xe605104d), /* PORT77CR */
+ PORTCR(78, 0xe605104e), /* PORT78CR */
+ PORTCR(79, 0xe605104f), /* PORT79CR */
+
+ PORTCR(80, 0xe6051050), /* PORT80CR */
+ PORTCR(81, 0xe6051051), /* PORT81CR */
+ PORTCR(82, 0xe6051052), /* PORT82CR */
+ PORTCR(83, 0xe6051053), /* PORT83CR */
+ PORTCR(84, 0xe6051054), /* PORT84CR */
+ PORTCR(85, 0xe6051055), /* PORT85CR */
+ PORTCR(86, 0xe6051056), /* PORT86CR */
+ PORTCR(87, 0xe6051057), /* PORT87CR */
+ PORTCR(88, 0xe6051058), /* PORT88CR */
+ PORTCR(89, 0xe6051059), /* PORT89CR */
+
+ PORTCR(90, 0xe605105a), /* PORT90CR */
+ PORTCR(91, 0xe605105b), /* PORT91CR */
+ PORTCR(92, 0xe605105c), /* PORT92CR */
+ PORTCR(93, 0xe605105d), /* PORT93CR */
+ PORTCR(94, 0xe605105e), /* PORT94CR */
+ PORTCR(95, 0xe605105f), /* PORT95CR */
+ PORTCR(96, 0xe6052060), /* PORT96CR */
+ PORTCR(97, 0xe6052061), /* PORT97CR */
+ PORTCR(98, 0xe6052062), /* PORT98CR */
+ PORTCR(99, 0xe6052063), /* PORT99CR */
+
+ PORTCR(100, 0xe6052064), /* PORT100CR */
+ PORTCR(101, 0xe6052065), /* PORT101CR */
+ PORTCR(102, 0xe6052066), /* PORT102CR */
+ PORTCR(103, 0xe6052067), /* PORT103CR */
+ PORTCR(104, 0xe6052068), /* PORT104CR */
+ PORTCR(105, 0xe6052069), /* PORT105CR */
+ PORTCR(106, 0xe605206a), /* PORT106CR */
+ PORTCR(107, 0xe605206b), /* PORT107CR */
+ PORTCR(108, 0xe605206c), /* PORT108CR */
+ PORTCR(109, 0xe605206d), /* PORT109CR */
+
+ PORTCR(110, 0xe605206e), /* PORT110CR */
+ PORTCR(111, 0xe605206f), /* PORT111CR */
+ PORTCR(112, 0xe6052070), /* PORT112CR */
+ PORTCR(113, 0xe6052071), /* PORT113CR */
+ PORTCR(114, 0xe6052072), /* PORT114CR */
+ PORTCR(115, 0xe6052073), /* PORT115CR */
+ PORTCR(116, 0xe6052074), /* PORT116CR */
+ PORTCR(117, 0xe6052075), /* PORT117CR */
+ PORTCR(118, 0xe6052076), /* PORT118CR */
+
+ PORTCR(128, 0xe6052080), /* PORT128CR */
+ PORTCR(129, 0xe6052081), /* PORT129CR */
+
+ PORTCR(130, 0xe6052082), /* PORT130CR */
+ PORTCR(131, 0xe6052083), /* PORT131CR */
+ PORTCR(132, 0xe6052084), /* PORT132CR */
+ PORTCR(133, 0xe6052085), /* PORT133CR */
+ PORTCR(134, 0xe6052086), /* PORT134CR */
+ PORTCR(135, 0xe6052087), /* PORT135CR */
+ PORTCR(136, 0xe6052088), /* PORT136CR */
+ PORTCR(137, 0xe6052089), /* PORT137CR */
+ PORTCR(138, 0xe605208a), /* PORT138CR */
+ PORTCR(139, 0xe605208b), /* PORT139CR */
+
+ PORTCR(140, 0xe605208c), /* PORT140CR */
+ PORTCR(141, 0xe605208d), /* PORT141CR */
+ PORTCR(142, 0xe605208e), /* PORT142CR */
+ PORTCR(143, 0xe605208f), /* PORT143CR */
+ PORTCR(144, 0xe6052090), /* PORT144CR */
+ PORTCR(145, 0xe6052091), /* PORT145CR */
+ PORTCR(146, 0xe6052092), /* PORT146CR */
+ PORTCR(147, 0xe6052093), /* PORT147CR */
+ PORTCR(148, 0xe6052094), /* PORT148CR */
+ PORTCR(149, 0xe6052095), /* PORT149CR */
+
+ PORTCR(150, 0xe6052096), /* PORT150CR */
+ PORTCR(151, 0xe6052097), /* PORT151CR */
+ PORTCR(152, 0xe6052098), /* PORT152CR */
+ PORTCR(153, 0xe6052099), /* PORT153CR */
+ PORTCR(154, 0xe605209a), /* PORT154CR */
+ PORTCR(155, 0xe605209b), /* PORT155CR */
+ PORTCR(156, 0xe605209c), /* PORT156CR */
+ PORTCR(157, 0xe605209d), /* PORT157CR */
+ PORTCR(158, 0xe605209e), /* PORT158CR */
+ PORTCR(159, 0xe605209f), /* PORT159CR */
+
+ PORTCR(160, 0xe60520a0), /* PORT160CR */
+ PORTCR(161, 0xe60520a1), /* PORT161CR */
+ PORTCR(162, 0xe60520a2), /* PORT162CR */
+ PORTCR(163, 0xe60520a3), /* PORT163CR */
+ PORTCR(164, 0xe60520a4), /* PORT164CR */
+
+ PORTCR(192, 0xe60520c0), /* PORT192CR */
+ PORTCR(193, 0xe60520c1), /* PORT193CR */
+ PORTCR(194, 0xe60520c2), /* PORT194CR */
+ PORTCR(195, 0xe60520c3), /* PORT195CR */
+ PORTCR(196, 0xe60520c4), /* PORT196CR */
+ PORTCR(197, 0xe60520c5), /* PORT197CR */
+ PORTCR(198, 0xe60520c6), /* PORT198CR */
+ PORTCR(199, 0xe60520c7), /* PORT199CR */
+
+ PORTCR(200, 0xe60520c8), /* PORT200CR */
+ PORTCR(201, 0xe60520c9), /* PORT201CR */
+ PORTCR(202, 0xe60520ca), /* PORT202CR */
+ PORTCR(203, 0xe60520cb), /* PORT203CR */
+ PORTCR(204, 0xe60520cc), /* PORT204CR */
+ PORTCR(205, 0xe60520cd), /* PORT205CR */
+ PORTCR(206, 0xe60520ce), /* PORT206CR */
+ PORTCR(207, 0xe60520cf), /* PORT207CR */
+ PORTCR(208, 0xe60520d0), /* PORT208CR */
+ PORTCR(209, 0xe60520d1), /* PORT209CR */
+
+ PORTCR(210, 0xe60520d2), /* PORT210CR */
+ PORTCR(211, 0xe60520d3), /* PORT211CR */
+ PORTCR(212, 0xe60520d4), /* PORT212CR */
+ PORTCR(213, 0xe60520d5), /* PORT213CR */
+ PORTCR(214, 0xe60520d6), /* PORT214CR */
+ PORTCR(215, 0xe60520d7), /* PORT215CR */
+ PORTCR(216, 0xe60520d8), /* PORT216CR */
+ PORTCR(217, 0xe60520d9), /* PORT217CR */
+ PORTCR(218, 0xe60520da), /* PORT218CR */
+ PORTCR(219, 0xe60520db), /* PORT219CR */
+
+ PORTCR(220, 0xe60520dc), /* PORT220CR */
+ PORTCR(221, 0xe60520dd), /* PORT221CR */
+ PORTCR(222, 0xe60520de), /* PORT222CR */
+ PORTCR(223, 0xe60520df), /* PORT223CR */
+ PORTCR(224, 0xe60530e0), /* PORT224CR */
+ PORTCR(225, 0xe60530e1), /* PORT225CR */
+ PORTCR(226, 0xe60530e2), /* PORT226CR */
+ PORTCR(227, 0xe60530e3), /* PORT227CR */
+ PORTCR(228, 0xe60530e4), /* PORT228CR */
+ PORTCR(229, 0xe60530e5), /* PORT229CR */
+
+ PORTCR(230, 0xe60530e6), /* PORT230CR */
+ PORTCR(231, 0xe60530e7), /* PORT231CR */
+ PORTCR(232, 0xe60530e8), /* PORT232CR */
+ PORTCR(233, 0xe60530e9), /* PORT233CR */
+ PORTCR(234, 0xe60530ea), /* PORT234CR */
+ PORTCR(235, 0xe60530eb), /* PORT235CR */
+ PORTCR(236, 0xe60530ec), /* PORT236CR */
+ PORTCR(237, 0xe60530ed), /* PORT237CR */
+ PORTCR(238, 0xe60530ee), /* PORT238CR */
+ PORTCR(239, 0xe60530ef), /* PORT239CR */
+
+ PORTCR(240, 0xe60530f0), /* PORT240CR */
+ PORTCR(241, 0xe60530f1), /* PORT241CR */
+ PORTCR(242, 0xe60530f2), /* PORT242CR */
+ PORTCR(243, 0xe60530f3), /* PORT243CR */
+ PORTCR(244, 0xe60530f4), /* PORT244CR */
+ PORTCR(245, 0xe60530f5), /* PORT245CR */
+ PORTCR(246, 0xe60530f6), /* PORT246CR */
+ PORTCR(247, 0xe60530f7), /* PORT247CR */
+ PORTCR(248, 0xe60530f8), /* PORT248CR */
+ PORTCR(249, 0xe60530f9), /* PORT249CR */
+
+ PORTCR(250, 0xe60530fa), /* PORT250CR */
+ PORTCR(251, 0xe60530fb), /* PORT251CR */
+ PORTCR(252, 0xe60530fc), /* PORT252CR */
+ PORTCR(253, 0xe60530fd), /* PORT253CR */
+ PORTCR(254, 0xe60530fe), /* PORT254CR */
+ PORTCR(255, 0xe60530ff), /* PORT255CR */
+ PORTCR(256, 0xe6053100), /* PORT256CR */
+ PORTCR(257, 0xe6053101), /* PORT257CR */
+ PORTCR(258, 0xe6053102), /* PORT258CR */
+ PORTCR(259, 0xe6053103), /* PORT259CR */
+
+ PORTCR(260, 0xe6053104), /* PORT260CR */
+ PORTCR(261, 0xe6053105), /* PORT261CR */
+ PORTCR(262, 0xe6053106), /* PORT262CR */
+ PORTCR(263, 0xe6053107), /* PORT263CR */
+ PORTCR(264, 0xe6053108), /* PORT264CR */
+ PORTCR(265, 0xe6053109), /* PORT265CR */
+ PORTCR(266, 0xe605310a), /* PORT266CR */
+ PORTCR(267, 0xe605310b), /* PORT267CR */
+ PORTCR(268, 0xe605310c), /* PORT268CR */
+ PORTCR(269, 0xe605310d), /* PORT269CR */
+
+ PORTCR(270, 0xe605310e), /* PORT270CR */
+ PORTCR(271, 0xe605310f), /* PORT271CR */
+ PORTCR(272, 0xe6053110), /* PORT272CR */
+ PORTCR(273, 0xe6053111), /* PORT273CR */
+ PORTCR(274, 0xe6053112), /* PORT274CR */
+ PORTCR(275, 0xe6053113), /* PORT275CR */
+ PORTCR(276, 0xe6053114), /* PORT276CR */
+ PORTCR(277, 0xe6053115), /* PORT277CR */
+ PORTCR(278, 0xe6053116), /* PORT278CR */
+ PORTCR(279, 0xe6053117), /* PORT279CR */
+
+ PORTCR(280, 0xe6053118), /* PORT280CR */
+ PORTCR(281, 0xe6053119), /* PORT281CR */
+ PORTCR(282, 0xe605311a), /* PORT282CR */
+
+ PORTCR(288, 0xe6052120), /* PORT288CR */
+ PORTCR(289, 0xe6052121), /* PORT289CR */
+
+ PORTCR(290, 0xe6052122), /* PORT290CR */
+ PORTCR(291, 0xe6052123), /* PORT291CR */
+ PORTCR(292, 0xe6052124), /* PORT292CR */
+ PORTCR(293, 0xe6052125), /* PORT293CR */
+ PORTCR(294, 0xe6052126), /* PORT294CR */
+ PORTCR(295, 0xe6052127), /* PORT295CR */
+ PORTCR(296, 0xe6052128), /* PORT296CR */
+ PORTCR(297, 0xe6052129), /* PORT297CR */
+ PORTCR(298, 0xe605212a), /* PORT298CR */
+ PORTCR(299, 0xe605212b), /* PORT299CR */
+
+ PORTCR(300, 0xe605212c), /* PORT300CR */
+ PORTCR(301, 0xe605212d), /* PORT301CR */
+ PORTCR(302, 0xe605212e), /* PORT302CR */
+ PORTCR(303, 0xe605212f), /* PORT303CR */
+ PORTCR(304, 0xe6052130), /* PORT304CR */
+ PORTCR(305, 0xe6052131), /* PORT305CR */
+ PORTCR(306, 0xe6052132), /* PORT306CR */
+ PORTCR(307, 0xe6052133), /* PORT307CR */
+ PORTCR(308, 0xe6052134), /* PORT308CR */
+ PORTCR(309, 0xe6052135), /* PORT309CR */
+
+ { PINMUX_CFG_REG("MSEL2CR", 0xe605801c, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL2CR_MSEL19_0, MSEL2CR_MSEL19_1,
+ MSEL2CR_MSEL18_0, MSEL2CR_MSEL18_1,
+ MSEL2CR_MSEL17_0, MSEL2CR_MSEL17_1,
+ MSEL2CR_MSEL16_0, MSEL2CR_MSEL16_1,
+ 0, 0,
+ MSEL2CR_MSEL14_0, MSEL2CR_MSEL14_1,
+ MSEL2CR_MSEL13_0, MSEL2CR_MSEL13_1,
+ MSEL2CR_MSEL12_0, MSEL2CR_MSEL12_1,
+ MSEL2CR_MSEL11_0, MSEL2CR_MSEL11_1,
+ MSEL2CR_MSEL10_0, MSEL2CR_MSEL10_1,
+ MSEL2CR_MSEL9_0, MSEL2CR_MSEL9_1,
+ MSEL2CR_MSEL8_0, MSEL2CR_MSEL8_1,
+ MSEL2CR_MSEL7_0, MSEL2CR_MSEL7_1,
+ MSEL2CR_MSEL6_0, MSEL2CR_MSEL6_1,
+ MSEL2CR_MSEL5_0, MSEL2CR_MSEL5_1,
+ MSEL2CR_MSEL4_0, MSEL2CR_MSEL4_1,
+ MSEL2CR_MSEL3_0, MSEL2CR_MSEL3_1,
+ MSEL2CR_MSEL2_0, MSEL2CR_MSEL2_1,
+ MSEL2CR_MSEL1_0, MSEL2CR_MSEL1_1,
+ MSEL2CR_MSEL0_0, MSEL2CR_MSEL0_1,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL3CR", 0xe6058020, 32, 1) {
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL3CR_MSEL28_0, MSEL3CR_MSEL28_1,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL3CR_MSEL15_0, MSEL3CR_MSEL15_1,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL3CR_MSEL11_0, MSEL3CR_MSEL11_1,
+ 0, 0,
+ MSEL3CR_MSEL9_0, MSEL3CR_MSEL9_1,
+ 0, 0,
+ 0, 0,
+ MSEL3CR_MSEL6_0, MSEL3CR_MSEL6_1,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL3CR_MSEL2_0, MSEL3CR_MSEL2_1,
+ 0, 0,
+ 0, 0,
+ }
+ },
+ { PINMUX_CFG_REG("MSEL4CR", 0xe6058024, 32, 1) {
+ 0, 0,
+ 0, 0,
+ MSEL4CR_MSEL29_0, MSEL4CR_MSEL29_1,
+ 0, 0,
+ MSEL4CR_MSEL27_0, MSEL4CR_MSEL27_1,
+ MSEL4CR_MSEL26_0, MSEL4CR_MSEL26_1,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL4CR_MSEL22_0, MSEL4CR_MSEL22_1,
+ MSEL4CR_MSEL21_0, MSEL4CR_MSEL21_1,
+ MSEL4CR_MSEL20_0, MSEL4CR_MSEL20_1,
+ MSEL4CR_MSEL19_0, MSEL4CR_MSEL19_1,
+ 0, 0,
+ 0, 0,
+ 0, 0,
+ MSEL4CR_MSEL15_0, MSEL4CR_MSEL15_1,
+ 0, 0,
+ MSEL4CR_MSEL13_0, MSEL4CR_MSEL13_1,
+ MSEL4CR_MSEL12_0, MSEL4CR_MSEL12_1,
+ MSEL4CR_MSEL11_0, MSEL4CR_MSEL11_1,
+ MSEL4CR_MSEL10_0, MSEL4CR_MSEL10_1,
+ MSEL4CR_MSEL9_0, MSEL4CR_MSEL9_1,
+ MSEL4CR_MSEL8_0, MSEL4CR_MSEL8_1,
+ MSEL4CR_MSEL7_0, MSEL4CR_MSEL7_1,
+ 0, 0,
+ 0, 0,
+ MSEL4CR_MSEL4_0, MSEL4CR_MSEL4_1,
+ 0, 0,
+ 0, 0,
+ MSEL4CR_MSEL1_0, MSEL4CR_MSEL1_1,
+ 0, 0,
+ }
+ },
+ { },
+};
+
+static struct pinmux_data_reg pinmux_data_regs[] = {
+ { PINMUX_DATA_REG("PORTL031_000DR", 0xe6054000, 32) {
+ PORT31_DATA, PORT30_DATA, PORT29_DATA, PORT28_DATA,
+ PORT27_DATA, PORT26_DATA, PORT25_DATA, PORT24_DATA,
+ PORT23_DATA, PORT22_DATA, PORT21_DATA, PORT20_DATA,
+ PORT19_DATA, PORT18_DATA, PORT17_DATA, PORT16_DATA,
+ PORT15_DATA, PORT14_DATA, PORT13_DATA, PORT12_DATA,
+ PORT11_DATA, PORT10_DATA, PORT9_DATA, PORT8_DATA,
+ PORT7_DATA, PORT6_DATA, PORT5_DATA, PORT4_DATA,
+ PORT3_DATA, PORT2_DATA, PORT1_DATA, PORT0_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD063_032DR", 0xe6055000, 32) {
+ PORT63_DATA, PORT62_DATA, PORT61_DATA, PORT60_DATA,
+ PORT59_DATA, PORT58_DATA, PORT57_DATA, PORT56_DATA,
+ PORT55_DATA, PORT54_DATA, PORT53_DATA, PORT52_DATA,
+ PORT51_DATA, PORT50_DATA, PORT49_DATA, PORT48_DATA,
+ PORT47_DATA, PORT46_DATA, PORT45_DATA, PORT44_DATA,
+ PORT43_DATA, PORT42_DATA, PORT41_DATA, PORT40_DATA,
+ PORT39_DATA, PORT38_DATA, PORT37_DATA, PORT36_DATA,
+ PORT35_DATA, PORT34_DATA, PORT33_DATA, PORT32_DATA }
+ },
+ { PINMUX_DATA_REG("PORTD095_064DR", 0xe6055004, 32) {
+ PORT95_DATA, PORT94_DATA, PORT93_DATA, PORT92_DATA,
+ PORT91_DATA, PORT90_DATA, PORT89_DATA, PORT88_DATA,
+ PORT87_DATA, PORT86_DATA, PORT85_DATA, PORT84_DATA,
+ PORT83_DATA, PORT82_DATA, PORT81_DATA, PORT80_DATA,
+ PORT79_DATA, PORT78_DATA, PORT77_DATA, PORT76_DATA,
+ PORT75_DATA, PORT74_DATA, PORT73_DATA, PORT72_DATA,
+ PORT71_DATA, PORT70_DATA, PORT69_DATA, PORT68_DATA,
+ PORT67_DATA, PORT66_DATA, PORT65_DATA, PORT64_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR127_096DR", 0xe6056000, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, PORT118_DATA, PORT117_DATA, PORT116_DATA,
+ PORT115_DATA, PORT114_DATA, PORT113_DATA, PORT112_DATA,
+ PORT111_DATA, PORT110_DATA, PORT109_DATA, PORT108_DATA,
+ PORT107_DATA, PORT106_DATA, PORT105_DATA, PORT104_DATA,
+ PORT103_DATA, PORT102_DATA, PORT101_DATA, PORT100_DATA,
+ PORT99_DATA, PORT98_DATA, PORT97_DATA, PORT96_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR159_128DR", 0xe6056004, 32) {
+ PORT159_DATA, PORT158_DATA, PORT157_DATA, PORT156_DATA,
+ PORT155_DATA, PORT154_DATA, PORT153_DATA, PORT152_DATA,
+ PORT151_DATA, PORT150_DATA, PORT149_DATA, PORT148_DATA,
+ PORT147_DATA, PORT146_DATA, PORT145_DATA, PORT144_DATA,
+ PORT143_DATA, PORT142_DATA, PORT141_DATA, PORT140_DATA,
+ PORT139_DATA, PORT138_DATA, PORT137_DATA, PORT136_DATA,
+ PORT135_DATA, PORT134_DATA, PORT133_DATA, PORT132_DATA,
+ PORT131_DATA, PORT130_DATA, PORT129_DATA, PORT128_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR191_160DR", 0xe6056008, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, 0, PORT164_DATA,
+ PORT163_DATA, PORT162_DATA, PORT161_DATA, PORT160_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR223_192DR", 0xe605600C, 32) {
+ PORT223_DATA, PORT222_DATA, PORT221_DATA, PORT220_DATA,
+ PORT219_DATA, PORT218_DATA, PORT217_DATA, PORT216_DATA,
+ PORT215_DATA, PORT214_DATA, PORT213_DATA, PORT212_DATA,
+ PORT211_DATA, PORT210_DATA, PORT209_DATA, PORT208_DATA,
+ PORT207_DATA, PORT206_DATA, PORT205_DATA, PORT204_DATA,
+ PORT203_DATA, PORT202_DATA, PORT201_DATA, PORT200_DATA,
+ PORT199_DATA, PORT198_DATA, PORT197_DATA, PORT196_DATA,
+ PORT195_DATA, PORT194_DATA, PORT193_DATA, PORT192_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU255_224DR", 0xe6057000, 32) {
+ PORT255_DATA, PORT254_DATA, PORT253_DATA, PORT252_DATA,
+ PORT251_DATA, PORT250_DATA, PORT249_DATA, PORT248_DATA,
+ PORT247_DATA, PORT246_DATA, PORT245_DATA, PORT244_DATA,
+ PORT243_DATA, PORT242_DATA, PORT241_DATA, PORT240_DATA,
+ PORT239_DATA, PORT238_DATA, PORT237_DATA, PORT236_DATA,
+ PORT235_DATA, PORT234_DATA, PORT233_DATA, PORT232_DATA,
+ PORT231_DATA, PORT230_DATA, PORT229_DATA, PORT228_DATA,
+ PORT227_DATA, PORT226_DATA, PORT225_DATA, PORT224_DATA }
+ },
+ { PINMUX_DATA_REG("PORTU287_256DR", 0xe6057004, 32) {
+ 0, 0, 0, 0,
+ 0, PORT282_DATA, PORT281_DATA, PORT280_DATA,
+ PORT279_DATA, PORT278_DATA, PORT277_DATA, PORT276_DATA,
+ PORT275_DATA, PORT274_DATA, PORT273_DATA, PORT272_DATA,
+ PORT271_DATA, PORT270_DATA, PORT269_DATA, PORT268_DATA,
+ PORT267_DATA, PORT266_DATA, PORT265_DATA, PORT264_DATA,
+ PORT263_DATA, PORT262_DATA, PORT261_DATA, PORT260_DATA,
+ PORT259_DATA, PORT258_DATA, PORT257_DATA, PORT256_DATA }
+ },
+ { PINMUX_DATA_REG("PORTR319_288DR", 0xe6056010, 32) {
+ 0, 0, 0, 0,
+ 0, 0, 0, 0,
+ 0, 0, PORT309_DATA, PORT308_DATA,
+ PORT307_DATA, PORT306_DATA, PORT305_DATA, PORT304_DATA,
+ PORT303_DATA, PORT302_DATA, PORT301_DATA, PORT300_DATA,
+ PORT299_DATA, PORT298_DATA, PORT297_DATA, PORT296_DATA,
+ PORT295_DATA, PORT294_DATA, PORT293_DATA, PORT292_DATA,
+ PORT291_DATA, PORT290_DATA, PORT289_DATA, PORT288_DATA }
+ },
+ { },
+};
+
+#if 0
+/* IRQ pins through INTCS with IRQ0->15 from 0x200 and IRQ16-31 from 0x3200 */
+#define EXT_IRQ16L(n) intcs_evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) intcs_evt2irq(0x3200 + ((n - 16) << 5))
+#else
+#define EXT_IRQ16L(n) (n)
+#define EXT_IRQ16H(n) (n)
+#endif
+
+static struct pinmux_irq pinmux_irqs[] = {
+ PINMUX_IRQ(EXT_IRQ16H(19), PORT9_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(1), PORT10_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(0), PORT11_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(18), PORT13_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(20), PORT14_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(21), PORT15_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(31), PORT26_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(30), PORT27_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(29), PORT28_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(22), PORT40_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(23), PORT53_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(10), PORT54_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT56_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(26), PORT115_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(27), PORT116_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(28), PORT117_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(24), PORT118_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(6), PORT147_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(2), PORT149_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(7), PORT150_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(12), PORT156_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(4), PORT159_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(25), PORT164_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(8), PORT223_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(3), PORT224_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(5), PORT227_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(17), PORT234_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(11), PORT238_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(13), PORT239_FN0),
+ PINMUX_IRQ(EXT_IRQ16H(16), PORT249_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(14), PORT251_FN0),
+ PINMUX_IRQ(EXT_IRQ16L(9), PORT308_FN0),
+};
+
+static struct pinmux_info sh73a0_pinmux_info = {
+ .name = "sh73a0_pfc",
+ .reserved_id = PINMUX_RESERVED,
+ .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END },
+ .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END },
+ .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END },
+ .input_pd = { PINMUX_INPUT_PULLDOWN_BEGIN, PINMUX_INPUT_PULLDOWN_END },
+ .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END },
+ .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END },
+ .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },
+
+ .first_gpio = GPIO_PORT0,
+ .last_gpio = GPIO_FN_FSIAISLD_PU,
+
+ .gpios = pinmux_gpios,
+ .cfg_regs = pinmux_config_regs,
+ .data_regs = pinmux_data_regs,
+
+ .gpio_data = pinmux_data,
+ .gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+ .gpio_irq = pinmux_irqs,
+ .gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
+};
+
+void sh73a0_pinmux_init(void)
+{
+ register_pinmux(&sh73a0_pinmux_info);
+}
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch-armv7/globaltimer.h>
+#include <asm/arch/rmobile.h>
+
+static struct globaltimer *global_timer = \
+ (struct globaltimer *)GLOBAL_TIMER_BASE_ADDR;
+
+#define CLK2MHZ(clk) (clk / 1000 / 1000)
+static u64 get_cpu_global_timer(void)
+{
+ u32 low, high;
+ u64 timer;
+
+ u32 old = readl(&global_timer->cnt_h);
+ while (1) {
+ low = readl(&global_timer->cnt_l);
+ high = readl(&global_timer->cnt_h);
+ if (old == high)
+ break;
+ else
+ old = high;
+ }
+
+ timer = high;
+ return (u64)((timer << 32) | low);
+}
+
+static u64 get_time_us(void)
+{
+ u64 timer = get_cpu_global_timer();
+
+ timer = ((timer << 2) + (CLK2MHZ(CONFIG_SYS_CPU_CLK) >> 1));
+ timer /= (u64)CLK2MHZ(CONFIG_SYS_CPU_CLK);
+ return timer;
+}
+
+static ulong get_time_ms(void)
+{
+ return (ulong)(get_time_us() / 1000);
+}
+
+int timer_init(void)
+{
+ writel(0x01, &global_timer->ctl);
+ return 0;
+}
+
+void __udelay(unsigned long usec)
+{
+ u64 start, current;
+ u64 wait;
+
+ start = get_cpu_global_timer();
+ wait = (u64)((usec * CLK2MHZ(CONFIG_SYS_CPU_CLK)) >> 2);
+ do {
+ current = get_cpu_global_timer();
+ } while ((current - start) < wait);
+}
+
+ulong get_timer(ulong base)
+{
+ return get_time_ms() - base;
+}
+
+unsigned long long get_ticks(void)
+{
+ return get_cpu_global_timer();
+}
+
+ulong get_tbclk(void)
+{
+ return (ulong)(CONFIG_SYS_CPU_CLK >> 2);
+}
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# Copyright (C) 2012 Altera Corporation <www.altera.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+SOBJS := lowlevel_init.o
+COBJS-y := misc.o timer.o
+COBJS-$(CONFIG_SPL_BUILD) += spl.o
+
+COBJS := $(COBJS-y)
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed "as is" WITHOUT ANY WARRANTY of any
+# kind, whether express or implied; without even the implied warranty
+# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+ifndef CONFIG_SPL_BUILD
+ALL-y += $(obj)u-boot.img
+endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <config.h>
+#include <version.h>
+
+/* Save the parameter pass in by previous boot loader */
+.global save_boot_params
+save_boot_params:
+ /* save the parameter here */
+
+ /*
+ * Setup stack for exception, which is located
+ * at the end of on-chip RAM. We don't expect exception prior to
+ * relocation and if that happens, we won't worry -- it will overide
+ * global data region as the code will goto reset. After relocation,
+ * this region won't be used by other part of program.
+ * Hence it is safe.
+ */
+ ldr r0, =(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE)
+ ldr r1, =IRQ_STACK_START_IN
+ str r0, [r1]
+
+ bx lr
+
+
+/* Set up the platform, once the cpu has been initialized */
+.globl lowlevel_init
+lowlevel_init:
+
+ /* Remap */
+#ifdef CONFIG_SPL_BUILD
+ /*
+ * SPL : configure the remap (L3 NIC-301 GPV)
+ * so the on-chip RAM at lower memory instead ROM.
+ */
+ ldr r0, =SOCFPGA_L3REGS_ADDRESS
+ mov r1, #0x19
+ str r1, [r0]
+#else
+ /*
+ * U-Boot : configure the remap (L3 NIC-301 GPV)
+ * so the SDRAM at lower memory instead on-chip RAM.
+ */
+ ldr r0, =SOCFPGA_L3REGS_ADDRESS
+ mov r1, #0x2
+ str r1, [r0]
+
+ /* Private components security */
+
+ /*
+ * U-Boot : configure private timer, global timer and cpu
+ * component access as non secure for kernel stage (as required
+ * by kernel)
+ */
+ mrc p15,4,r0,c15,c0,0
+ add r1, r0, #0x54
+ ldr r2, [r1]
+ orr r2, r2, #0xff
+ orr r2, r2, #0xf00
+ str r2, [r1]
+#endif /* #ifdef CONFIG_SPL_BUILD */
+ mov pc, lr
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/reset_manager.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_reset_manager *reset_manager_base =
+ (void *)SOCFPGA_RSTMGR_ADDRESS;
+
+/*
+ * Write the reset manager register to cause reset
+ */
+void reset_cpu(ulong addr)
+{
+ /* request a warm reset */
+ writel(RSTMGR_CTRL_SWWARMRSTREQ_LSB, &reset_manager_base->ctrl);
+ /*
+ * infinite loop here as watchdog will trigger and reset
+ * the processor
+ */
+ while (1)
+ ;
+}
+
+/*
+ * Release peripherals from reset based on handoff
+ */
+void reset_deassert_peripherals_handoff(void)
+{
+ writel(0, &reset_manager_base->per_mod_reset);
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <version.h>
+#include <image.h>
+#include <malloc.h>
+#include <asm/arch/reset_manager.h>
+#include <spl.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+u32 spl_boot_device(void)
+{
+ return BOOT_DEVICE_RAM;
+}
+
+/*
+ * Board initialization after bss clearance
+ */
+void spl_board_init(void)
+{
+ /* init timer for enabling delay function */
+ timer_init();
+
+ /* de-assert reset for peripherals and bridges based on handoff */
+ reset_deassert_peripherals_handoff();
+
+ /* enable console uart printing */
+ preloader_console_init();
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_timer *timer_base = (void *)CONFIG_SYS_TIMERBASE;
+
+/*
+ * Timer initialization
+ */
+int timer_init(void)
+{
+ writel(TIMER_LOAD_VAL, &timer_base->load_val);
+ writel(TIMER_LOAD_VAL, &timer_base->curr_val);
+ writel(readl(&timer_base->ctrl) | 0x3, &timer_base->ctrl);
+ return 0;
+}
+
+static u32 read_timer(void)
+{
+ return readl(&timer_base->curr_val);
+}
+
+/*
+ * Delay x useconds
+ */
+void __udelay(unsigned long usec)
+{
+ unsigned long now, last;
+ /*
+ * get the tmo value based on timer clock speed
+ * tmo = delay required / period of timer clock
+ */
+ long tmo = usec * CONFIG_TIMER_CLOCK_KHZ / 1000;
+
+ last = read_timer();
+ while (tmo > 0) {
+ now = read_timer();
+ if (last >= now)
+ /* normal mode (non roll) */
+ tmo -= last - now;
+ else
+ /* we have overflow of the count down timer */
+ tmo -= TIMER_LOAD_VAL - last + now;
+ last = now;
+ }
+}
+
+/*
+ * Get the timer value
+ */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/*
+ * Timer : get the time difference
+ * Unit of tick is based on the CONFIG_SYS_HZ
+ */
+ulong get_timer_masked(void)
+{
+ /* current tick value */
+ ulong now = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
+ if (gd->lastinc >= now) {
+ /* normal mode (non roll) */
+ /* move stamp forward with absolute diff ticks */
+ gd->tbl += gd->lastinc - now;
+ } else {
+ /* we have overflow of the count down timer */
+ gd->tbl += TIMER_LOAD_VAL - gd->lastinc + now;
+ }
+ gd->lastinc = now;
+ return gd->tbl;
+}
+
+/*
+ * Reset the timer
+ */
+void reset_timer(void)
+{
+ /* capture current decrementer value time */
+ gd->lastinc = read_timer() / (CONFIG_TIMER_CLOCK_KHZ/CONFIG_SYS_HZ);
+ /* start "advancing" time stamp from 0 */
+ gd->tbl = 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+MEMORY { .sdram : ORIGIN = (0), LENGTH = (0xffffffff) }
+
+OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
+OUTPUT_ARCH(arm)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ arch/arm/cpu/armv7/start.o (.text)
+ *(.text*)
+ } >.sdram
+
+ . = ALIGN(4);
+ .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) } >.sdram
+
+ . = ALIGN(4);
+ .data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sdram
+
+ . = ALIGN(4);
+ __image_copy_end = .;
+ _end = .;
+
+ .bss : {
+ . = ALIGN(4);
+ __bss_start = .;
+ *(.bss*)
+ . = ALIGN(4);
+ __bss_end__ = .;
+ } >.sdram
+
+ . = ALIGN(8);
+ __malloc_start = .;
+ . = . + CONFIG_SPL_MALLOC_SIZE;
+ __malloc_end = .;
+
+ . = . + CONFIG_SPL_STACK_SIZE;
+ . = ALIGN(8);
+ __stack_start = .;
+}
* basic memory. Go here to bump up clock rate and handle
* wake up conditions.
*/
- mov ip, lr @ persevere link reg across call
- bl lowlevel_init @ go setup pll,mux,memory
- mov lr, ip @ restore link
- mov pc, lr @ back to my caller
+ b lowlevel_init @ go setup pll,mux,memory
ENDPROC(cpu_init_crit)
#endif
--- /dev/null
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2008
+# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(SOC).o
+
+COBJS-y := timer.o
+COBJS-y += cpu.o
+
+COBJS := $(COBJS-y)
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+all: $(obj).depend $(LIB)
+
+$(LIB): $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2012 Xilinx, Inc. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+
+inline void lowlevel_init(void) {}
+
+void reset_cpu(ulong addr)
+{
+ while (1)
+ ;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
+ *
+ * (C) Copyright 2008
+ * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
+ *
+ * (C) Copyright 2004
+ * Philippe Robin, ARM Ltd. <philippe.robin@arm.com>
+ *
+ * (C) Copyright 2002-2004
+ * Gary Jennejohn, DENX Software Engineering, <gj@denx.de>
+ *
+ * (C) Copyright 2003
+ * Texas Instruments <www.ti.com>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Alex Zuepke <azu@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct scu_timer {
+ u32 load; /* Timer Load Register */
+ u32 counter; /* Timer Counter Register */
+ u32 control; /* Timer Control Register */
+};
+
+static struct scu_timer *timer_base =
+ (struct scu_timer *) CONFIG_SCUTIMER_BASEADDR;
+
+#define SCUTIMER_CONTROL_PRESCALER_MASK 0x0000FF00 /* Prescaler */
+#define SCUTIMER_CONTROL_PRESCALER_SHIFT 8
+#define SCUTIMER_CONTROL_AUTO_RELOAD_MASK 0x00000002 /* Auto-reload */
+#define SCUTIMER_CONTROL_ENABLE_MASK 0x00000001 /* Timer enable */
+
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+#define TIMER_PRESCALE 255
+#define TIMER_TICK_HZ (CONFIG_CPU_FREQ_HZ / 2 / TIMER_PRESCALE)
+
+int timer_init(void)
+{
+ const u32 emask = SCUTIMER_CONTROL_AUTO_RELOAD_MASK |
+ (TIMER_PRESCALE << SCUTIMER_CONTROL_PRESCALER_SHIFT) |
+ SCUTIMER_CONTROL_ENABLE_MASK;
+
+ /* Load the timer counter register */
+ writel(0xFFFFFFFF, &timer_base->counter);
+
+ /*
+ * Start the A9Timer device
+ * Enable Auto reload mode, Clear prescaler control bits
+ * Set prescaler value, Enable the decrementer
+ */
+ clrsetbits_le32(&timer_base->control, SCUTIMER_CONTROL_PRESCALER_MASK,
+ emask);
+
+ /* Reset time */
+ gd->lastinc = readl(&timer_base->counter) /
+ (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+ gd->tbl = 0;
+
+ return 0;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+ulong get_timer_masked(void)
+{
+ ulong now;
+
+ now = readl(&timer_base->counter) / (TIMER_TICK_HZ / CONFIG_SYS_HZ);
+
+ if (gd->lastinc >= now) {
+ /* Normal mode */
+ gd->tbl += gd->lastinc - now;
+ } else {
+ /* We have an overflow ... */
+ gd->tbl += gd->lastinc + TIMER_LOAD_VAL - now;
+ }
+ gd->lastinc = now;
+
+ return gd->tbl;
+}
+
+void __udelay(unsigned long usec)
+{
+ unsigned long long tmp;
+ ulong tmo;
+
+ tmo = usec / (1000000 / CONFIG_SYS_HZ);
+ tmp = get_ticks() + tmo; /* Get current timestamp */
+
+ while (get_ticks() < tmp) { /* Loop till event */
+ /* NOP */;
+ }
+}
+
+/* Timer without interrupts */
+ulong get_timer(ulong base)
+{
+ return get_timer_masked() - base;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On ARM it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On ARM it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+ return CONFIG_SYS_HZ;
+}
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
adr r0, _start
cmp r0, r6
+ moveq r9, #0 /* no relocation. relocation offset(r9) = 0 */
beq clear_bss /* skip relocation */
mov r1, r6 /* r1 <- scratch for copy_loop */
ldr r3, _bss_start_ofs
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <ipu_pixfmt.h>
#ifdef CONFIG_FSL_ESDHC
#include <fsl_esdhc.h>
return get_periph_clk() / (ahb_podf + 1);
}
+
+#if defined(CONFIG_VIDEO_IPUV3)
+void arch_preboot_os(void)
+{
+ /* disable video before launching O/S */
+ ipuv3_fb_shutdown();
+}
+#endif
#ifndef _ASM_ARCH_SPL_H_
#define _ASM_SPL_H_
+#define BOOT_DEVICE_XIP 2
#define BOOT_DEVICE_NAND 5
#define BOOT_DEVICE_MMC1 8
#define BOOT_DEVICE_MMC2 9 /* eMMC or daughter card */
#define BOOT_DEVICE_UART 65
+#define BOOT_DEVICE_CPGMAC 70
#define BOOT_DEVICE_MMC2_2 0xFF
#endif
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _GLOBALTIMER_H_
+#define _GLOBALTIMER_H_
+
+struct globaltimer {
+ u32 cnt_l; /* 0x00 */
+ u32 cnt_h;
+ u32 ctl;
+ u32 stat;
+ u32 cmp_l; /* 0x10 */
+ u32 cmp_h;
+ u32 inc;
+};
+
+#endif /* _GLOBALTIMER_H_ */
/*
* functions
*/
-void reset_cpu(unsigned long ignored);
unsigned char get_random_hex(void);
unsigned int kw_sdram_bar(enum memory_bank bank);
unsigned int kw_sdram_bs(enum memory_bank bank);
+void kw_sdram_size_adjust(enum memory_bank bank);
int kw_config_adr_windows(void);
void kw_config_gpio(unsigned int gpp0_oe_val, unsigned int gpp1_oe_val,
unsigned int gpp0_oe, unsigned int gpp1_oe);
#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1 )
#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1 )
-#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 )
+#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1 )
#define MPP8_TW_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1 )
#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1 )
#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1 )
#define BOARD_REV_1_0 0x0
#define BOARD_REV_2_0 0x1
+#define BOARD_VER_OFFSET 0x8
+
#define IMX_IIM_BASE (IIM_BASE_ADDR)
#if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
/*
* functions
*/
-void reset_cpu(unsigned long ignored);
u32 orion5x_device_id(void);
u32 orion5x_device_rev(void);
unsigned int orion5x_winctrl_calcsize(unsigned int sizeval);
--- /dev/null
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#if defined(CONFIG_SH73A0)
+#include "sh73a0-gpio.h"
+void sh73a0_pinmux_init(void);
+#elif defined(CONFIG_R8A7740)
+#include "r8a7740-gpio.h"
+void r8a7740_pinmux_init(void);
+#endif
+
+#endif /* __ASM_ARCH_GPIO_H */
--- /dev/null
+#ifndef __ASM_MACH_IRQS_H
+#define __ASM_MACH_IRQS_H
+
+#define NR_IRQS 1024
+
+/* GIC */
+#define gic_spi(nr) ((nr) + 32)
+
+/* INTCA */
+#define evt2irq(evt) (((evt) >> 5) - 16)
+#define irq2evt(irq) (((irq) + 16) << 5)
+
+/* INTCS */
+#define INTCS_VECT_BASE 0x2200
+#define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect))
+#define intcs_evt2irq(evt) evt2irq(INTCS_VECT_BASE + (evt))
+
+#endif /* __ASM_MACH_IRQS_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Renesas Solutions Corp.
+ * Copyright (C) 2011 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#ifndef __ASM_R8A7740_H__
+#define __ASM_R8A7740_H__
+
+/*
+ * MD_CKx pin
+ */
+#define MD_CK2 (1 << 2)
+#define MD_CK1 (1 << 1)
+#define MD_CK0 (1 << 0)
+
+/*
+ * Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* PORT */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118, GPIO_PORT119,
+
+ GPIO_PORT120, GPIO_PORT121, GPIO_PORT122, GPIO_PORT123, GPIO_PORT124,
+ GPIO_PORT125, GPIO_PORT126, GPIO_PORT127, GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+ GPIO_PORT165, GPIO_PORT166, GPIO_PORT167, GPIO_PORT168, GPIO_PORT169,
+
+ GPIO_PORT170, GPIO_PORT171, GPIO_PORT172, GPIO_PORT173, GPIO_PORT174,
+ GPIO_PORT175, GPIO_PORT176, GPIO_PORT177, GPIO_PORT178, GPIO_PORT179,
+
+ GPIO_PORT180, GPIO_PORT181, GPIO_PORT182, GPIO_PORT183, GPIO_PORT184,
+ GPIO_PORT185, GPIO_PORT186, GPIO_PORT187, GPIO_PORT188, GPIO_PORT189,
+
+ GPIO_PORT190, GPIO_PORT191, GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211,
+
+ /* IRQ */
+ GPIO_FN_IRQ0_PORT2, GPIO_FN_IRQ0_PORT13,
+ GPIO_FN_IRQ1,
+ GPIO_FN_IRQ2_PORT11, GPIO_FN_IRQ2_PORT12,
+ GPIO_FN_IRQ3_PORT10, GPIO_FN_IRQ3_PORT14,
+ GPIO_FN_IRQ4_PORT15, GPIO_FN_IRQ4_PORT172,
+ GPIO_FN_IRQ5_PORT0, GPIO_FN_IRQ5_PORT1,
+ GPIO_FN_IRQ6_PORT121, GPIO_FN_IRQ6_PORT173,
+ GPIO_FN_IRQ7_PORT120, GPIO_FN_IRQ7_PORT209,
+ GPIO_FN_IRQ8,
+ GPIO_FN_IRQ9_PORT118, GPIO_FN_IRQ9_PORT210,
+ GPIO_FN_IRQ10,
+ GPIO_FN_IRQ11,
+ GPIO_FN_IRQ12_PORT42, GPIO_FN_IRQ12_PORT97,
+ GPIO_FN_IRQ13_PORT64, GPIO_FN_IRQ13_PORT98,
+ GPIO_FN_IRQ14_PORT63, GPIO_FN_IRQ14_PORT99,
+ GPIO_FN_IRQ15_PORT62, GPIO_FN_IRQ15_PORT100,
+ GPIO_FN_IRQ16_PORT68, GPIO_FN_IRQ16_PORT211,
+ GPIO_FN_IRQ17,
+ GPIO_FN_IRQ18,
+ GPIO_FN_IRQ19,
+ GPIO_FN_IRQ20,
+ GPIO_FN_IRQ21,
+ GPIO_FN_IRQ22,
+ GPIO_FN_IRQ23,
+ GPIO_FN_IRQ24,
+ GPIO_FN_IRQ25,
+ GPIO_FN_IRQ26_PORT58, GPIO_FN_IRQ26_PORT81,
+ GPIO_FN_IRQ27_PORT57, GPIO_FN_IRQ27_PORT168,
+ GPIO_FN_IRQ28_PORT56, GPIO_FN_IRQ28_PORT169,
+ GPIO_FN_IRQ29_PORT50, GPIO_FN_IRQ29_PORT170,
+ GPIO_FN_IRQ30_PORT49, GPIO_FN_IRQ30_PORT171,
+ GPIO_FN_IRQ31_PORT41, GPIO_FN_IRQ31_PORT167,
+
+ /* Function */
+
+ /* DBGT */
+ GPIO_FN_DBGMDT2, GPIO_FN_DBGMDT1, GPIO_FN_DBGMDT0,
+ GPIO_FN_DBGMD10, GPIO_FN_DBGMD11, GPIO_FN_DBGMD20,
+ GPIO_FN_DBGMD21,
+
+ /* FSI */
+ GPIO_FN_FSIAISLD_PORT0, /* FSIAISLD Port 0/5 */
+ GPIO_FN_FSIAISLD_PORT5,
+ GPIO_FN_FSIASPDIF_PORT9, /* FSIASPDIF Port 9/18 */
+ GPIO_FN_FSIASPDIF_PORT18,
+ GPIO_FN_FSIAOSLD1, GPIO_FN_FSIAOSLD2,
+ GPIO_FN_FSIAOLR, GPIO_FN_FSIAOBT,
+ GPIO_FN_FSIAOSLD, GPIO_FN_FSIAOMC,
+ GPIO_FN_FSIACK, GPIO_FN_FSIAILR,
+ GPIO_FN_FSIAIBT,
+
+ /* FMSI */
+ GPIO_FN_FMSISLD_PORT1, /* FMSISLD Port 1/6 */
+ GPIO_FN_FMSISLD_PORT6,
+ GPIO_FN_FMSIILR, GPIO_FN_FMSIIBT,
+ GPIO_FN_FMSIOLR, GPIO_FN_FMSIOBT,
+ GPIO_FN_FMSICK, GPIO_FN_FMSOILR,
+ GPIO_FN_FMSOIBT, GPIO_FN_FMSOOLR,
+ GPIO_FN_FMSOOBT, GPIO_FN_FMSOSLD,
+ GPIO_FN_FMSOCK,
+
+ /* SCIFA0 */
+ GPIO_FN_SCIFA0_SCK, GPIO_FN_SCIFA0_CTS,
+ GPIO_FN_SCIFA0_RTS, GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_SCIFA0_TXD,
+
+ /* SCIFA1 */
+ GPIO_FN_SCIFA1_CTS, GPIO_FN_SCIFA1_SCK,
+ GPIO_FN_SCIFA1_RXD, GPIO_FN_SCIFA1_TXD,
+ GPIO_FN_SCIFA1_RTS,
+
+ /* SCIFA2 */
+ GPIO_FN_SCIFA2_SCK_PORT22, /* SCIFA2_SCK Port 22/199 */
+ GPIO_FN_SCIFA2_SCK_PORT199,
+ GPIO_FN_SCIFA2_RXD, GPIO_FN_SCIFA2_TXD,
+ GPIO_FN_SCIFA2_CTS, GPIO_FN_SCIFA2_RTS,
+
+ /* SCIFA3 */
+ GPIO_FN_SCIFA3_RTS_PORT105, /* MSEL5CR_8_0 */
+ GPIO_FN_SCIFA3_SCK_PORT116,
+ GPIO_FN_SCIFA3_CTS_PORT117,
+ GPIO_FN_SCIFA3_RXD_PORT174,
+ GPIO_FN_SCIFA3_TXD_PORT175,
+
+ GPIO_FN_SCIFA3_RTS_PORT161, /* MSEL5CR_8_1 */
+ GPIO_FN_SCIFA3_SCK_PORT158,
+ GPIO_FN_SCIFA3_CTS_PORT162,
+ GPIO_FN_SCIFA3_RXD_PORT159,
+ GPIO_FN_SCIFA3_TXD_PORT160,
+
+ /* SCIFA4 */
+ GPIO_FN_SCIFA4_RXD_PORT12, /* MSEL5CR[12:11] = 00 */
+ GPIO_FN_SCIFA4_TXD_PORT13,
+
+ GPIO_FN_SCIFA4_RXD_PORT204, /* MSEL5CR[12:11] = 01 */
+ GPIO_FN_SCIFA4_TXD_PORT203,
+
+ GPIO_FN_SCIFA4_RXD_PORT94, /* MSEL5CR[12:11] = 10 */
+ GPIO_FN_SCIFA4_TXD_PORT93,
+
+ GPIO_FN_SCIFA4_SCK_PORT21, /* SCIFA4_SCK Port 21/205 */
+ GPIO_FN_SCIFA4_SCK_PORT205,
+
+ /* SCIFA5 */
+ GPIO_FN_SCIFA5_TXD_PORT20, /* MSEL5CR[15:14] = 00 */
+ GPIO_FN_SCIFA5_RXD_PORT10,
+
+ GPIO_FN_SCIFA5_RXD_PORT207, /* MSEL5CR[15:14] = 01 */
+ GPIO_FN_SCIFA5_TXD_PORT208,
+
+ GPIO_FN_SCIFA5_TXD_PORT91, /* MSEL5CR[15:14] = 10 */
+ GPIO_FN_SCIFA5_RXD_PORT92,
+
+ GPIO_FN_SCIFA5_SCK_PORT23, /* SCIFA5_SCK Port 23/206 */
+ GPIO_FN_SCIFA5_SCK_PORT206,
+
+ /* SCIFA6 */
+ GPIO_FN_SCIFA6_SCK, GPIO_FN_SCIFA6_RXD, GPIO_FN_SCIFA6_TXD,
+
+ /* SCIFA7 */
+ GPIO_FN_SCIFA7_TXD, GPIO_FN_SCIFA7_RXD,
+
+ /* SCIFAB */
+ GPIO_FN_SCIFB_SCK_PORT190, /* MSEL5CR_17_0 */
+ GPIO_FN_SCIFB_RXD_PORT191,
+ GPIO_FN_SCIFB_TXD_PORT192,
+ GPIO_FN_SCIFB_RTS_PORT186,
+ GPIO_FN_SCIFB_CTS_PORT187,
+
+ GPIO_FN_SCIFB_SCK_PORT2, /* MSEL5CR_17_1 */
+ GPIO_FN_SCIFB_RXD_PORT3,
+ GPIO_FN_SCIFB_TXD_PORT4,
+ GPIO_FN_SCIFB_RTS_PORT172,
+ GPIO_FN_SCIFB_CTS_PORT173,
+
+ /* LCD0 */
+ GPIO_FN_LCDC0_SELECT,
+ GPIO_FN_LCD0_D0, GPIO_FN_LCD0_D1, GPIO_FN_LCD0_D2,
+ GPIO_FN_LCD0_D3, GPIO_FN_LCD0_D4, GPIO_FN_LCD0_D5,
+ GPIO_FN_LCD0_D6, GPIO_FN_LCD0_D7, GPIO_FN_LCD0_D8,
+ GPIO_FN_LCD0_D9, GPIO_FN_LCD0_D10, GPIO_FN_LCD0_D11,
+ GPIO_FN_LCD0_D12, GPIO_FN_LCD0_D13, GPIO_FN_LCD0_D14,
+ GPIO_FN_LCD0_D15, GPIO_FN_LCD0_D16, GPIO_FN_LCD0_D17,
+ GPIO_FN_LCD0_DON, GPIO_FN_LCD0_VCPWC, GPIO_FN_LCD0_VEPWC,
+
+ GPIO_FN_LCD0_DCK, GPIO_FN_LCD0_VSYN, /* for RGB */
+ GPIO_FN_LCD0_HSYN, GPIO_FN_LCD0_DISP, /* for RGB */
+
+ GPIO_FN_LCD0_WR, GPIO_FN_LCD0_RD, /* for SYS */
+ GPIO_FN_LCD0_CS, GPIO_FN_LCD0_RS, /* for SYS */
+
+ GPIO_FN_LCD0_D18_PORT163, GPIO_FN_LCD0_D19_PORT162,
+ GPIO_FN_LCD0_D20_PORT161, GPIO_FN_LCD0_D21_PORT158,
+ GPIO_FN_LCD0_D22_PORT160, GPIO_FN_LCD0_D23_PORT159,
+ GPIO_FN_LCD0_LCLK_PORT165, /* MSEL5CR_6_1 */
+
+ GPIO_FN_LCD0_D18_PORT40, GPIO_FN_LCD0_D19_PORT4,
+ GPIO_FN_LCD0_D20_PORT3, GPIO_FN_LCD0_D21_PORT2,
+ GPIO_FN_LCD0_D22_PORT0, GPIO_FN_LCD0_D23_PORT1,
+ GPIO_FN_LCD0_LCLK_PORT102, /* MSEL5CR_6_0 */
+
+ /* LCD1 */
+ GPIO_FN_LCDC1_SELECT,
+ GPIO_FN_LCD1_D0, GPIO_FN_LCD1_D1, GPIO_FN_LCD1_D2,
+ GPIO_FN_LCD1_D3, GPIO_FN_LCD1_D4, GPIO_FN_LCD1_D5,
+ GPIO_FN_LCD1_D6, GPIO_FN_LCD1_D7, GPIO_FN_LCD1_D8,
+ GPIO_FN_LCD1_D9, GPIO_FN_LCD1_D10, GPIO_FN_LCD1_D11,
+ GPIO_FN_LCD1_D12, GPIO_FN_LCD1_D13, GPIO_FN_LCD1_D14,
+ GPIO_FN_LCD1_D15, GPIO_FN_LCD1_D16, GPIO_FN_LCD1_D17,
+ GPIO_FN_LCD1_D18, GPIO_FN_LCD1_D19, GPIO_FN_LCD1_D20,
+ GPIO_FN_LCD1_D21, GPIO_FN_LCD1_D22, GPIO_FN_LCD1_D23,
+ GPIO_FN_LCD1_DON, GPIO_FN_LCD1_VCPWC,
+ GPIO_FN_LCD1_LCLK, GPIO_FN_LCD1_VEPWC,
+
+ GPIO_FN_LCD1_DCK, GPIO_FN_LCD1_VSYN, /* for RGB */
+ GPIO_FN_LCD1_HSYN, GPIO_FN_LCD1_DISP, /* for RGB */
+
+ GPIO_FN_LCD1_WR, GPIO_FN_LCD1_RD, /* for SYS */
+ GPIO_FN_LCD1_CS, GPIO_FN_LCD1_RS, /* for SYS */
+
+ /* RSPI */
+ GPIO_FN_RSPI_SSL0_A, GPIO_FN_RSPI_SSL1_A,
+ GPIO_FN_RSPI_SSL2_A, GPIO_FN_RSPI_SSL3_A,
+ GPIO_FN_RSPI_MOSI_A, GPIO_FN_RSPI_MISO_A,
+ GPIO_FN_RSPI_CK_A,
+
+ /* VIO CKO */
+ GPIO_FN_VIO_CKO1,
+ GPIO_FN_VIO_CKO2,
+ GPIO_FN_VIO_CKO_1,
+ GPIO_FN_VIO_CKO,
+
+ /* VIO0 */
+ GPIO_FN_VIO0_D0, GPIO_FN_VIO0_D1, GPIO_FN_VIO0_D2,
+ GPIO_FN_VIO0_D3, GPIO_FN_VIO0_D4, GPIO_FN_VIO0_D5,
+ GPIO_FN_VIO0_D6, GPIO_FN_VIO0_D7, GPIO_FN_VIO0_D8,
+ GPIO_FN_VIO0_D9, GPIO_FN_VIO0_D10, GPIO_FN_VIO0_D11,
+ GPIO_FN_VIO0_D12, GPIO_FN_VIO0_VD, GPIO_FN_VIO0_HD,
+ GPIO_FN_VIO0_CLK, GPIO_FN_VIO0_FIELD,
+
+ GPIO_FN_VIO0_D13_PORT26, /* MSEL5CR_27_0 */
+ GPIO_FN_VIO0_D14_PORT25,
+ GPIO_FN_VIO0_D15_PORT24,
+
+ GPIO_FN_VIO0_D13_PORT22, /* MSEL5CR_27_1 */
+ GPIO_FN_VIO0_D14_PORT95,
+ GPIO_FN_VIO0_D15_PORT96,
+
+ /* VIO1 */
+ GPIO_FN_VIO1_D0, GPIO_FN_VIO1_D1, GPIO_FN_VIO1_D2,
+ GPIO_FN_VIO1_D3, GPIO_FN_VIO1_D4, GPIO_FN_VIO1_D5,
+ GPIO_FN_VIO1_D6, GPIO_FN_VIO1_D7, GPIO_FN_VIO1_VD,
+ GPIO_FN_VIO1_HD, GPIO_FN_VIO1_CLK, GPIO_FN_VIO1_FIELD,
+
+ /* TPU0 */
+ GPIO_FN_TPU0TO0, GPIO_FN_TPU0TO1,
+ GPIO_FN_TPU0TO3,
+ GPIO_FN_TPU0TO2_PORT66, /* TPU0TO2 Port 66/202 */
+ GPIO_FN_TPU0TO2_PORT202,
+
+ /* SSP1 0 */
+ GPIO_FN_STP0_IPD0, GPIO_FN_STP0_IPD1, GPIO_FN_STP0_IPD2,
+ GPIO_FN_STP0_IPD3, GPIO_FN_STP0_IPD4, GPIO_FN_STP0_IPD5,
+ GPIO_FN_STP0_IPD6, GPIO_FN_STP0_IPD7, GPIO_FN_STP0_IPEN,
+ GPIO_FN_STP0_IPCLK, GPIO_FN_STP0_IPSYNC,
+
+ /* SSP1 1 */
+ GPIO_FN_STP1_IPD1, GPIO_FN_STP1_IPD2, GPIO_FN_STP1_IPD3,
+ GPIO_FN_STP1_IPD4, GPIO_FN_STP1_IPD5, GPIO_FN_STP1_IPD6,
+ GPIO_FN_STP1_IPD7, GPIO_FN_STP1_IPCLK, GPIO_FN_STP1_IPSYNC,
+
+ GPIO_FN_STP1_IPD0_PORT186, /* MSEL5CR_23_0 */
+ GPIO_FN_STP1_IPEN_PORT187,
+
+ GPIO_FN_STP1_IPD0_PORT194, /* MSEL5CR_23_1 */
+ GPIO_FN_STP1_IPEN_PORT193,
+
+ /* SIM */
+ GPIO_FN_SIM_RST, GPIO_FN_SIM_CLK,
+ GPIO_FN_SIM_D_PORT22, /* SIM_D Port 22/199 */
+ GPIO_FN_SIM_D_PORT199,
+
+ /* SDHI0 */
+ GPIO_FN_SDHI0_D0, GPIO_FN_SDHI0_D1, GPIO_FN_SDHI0_D2,
+ GPIO_FN_SDHI0_D3, GPIO_FN_SDHI0_CD, GPIO_FN_SDHI0_WP,
+ GPIO_FN_SDHI0_CMD, GPIO_FN_SDHI0_CLK,
+
+ /* SDHI1 */
+ GPIO_FN_SDHI1_D0, GPIO_FN_SDHI1_D1, GPIO_FN_SDHI1_D2,
+ GPIO_FN_SDHI1_D3, GPIO_FN_SDHI1_CD, GPIO_FN_SDHI1_WP,
+ GPIO_FN_SDHI1_CMD, GPIO_FN_SDHI1_CLK,
+
+ /* SDHI2 */
+ GPIO_FN_SDHI2_D0, GPIO_FN_SDHI2_D1, GPIO_FN_SDHI2_D2,
+ GPIO_FN_SDHI2_D3, GPIO_FN_SDHI2_CLK, GPIO_FN_SDHI2_CMD,
+
+ GPIO_FN_SDHI2_CD_PORT24, /* MSEL5CR_19_0 */
+ GPIO_FN_SDHI2_WP_PORT25,
+
+ GPIO_FN_SDHI2_WP_PORT177, /* MSEL5CR_19_1 */
+ GPIO_FN_SDHI2_CD_PORT202,
+
+ /* MSIOF2 */
+ GPIO_FN_MSIOF2_TXD, GPIO_FN_MSIOF2_RXD, GPIO_FN_MSIOF2_TSCK,
+ GPIO_FN_MSIOF2_SS2, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_MSIOF2_SS1,
+ GPIO_FN_MSIOF2_MCK1, GPIO_FN_MSIOF2_MCK0, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_MSIOF2_RSCK,
+
+ /* KEYSC */
+ GPIO_FN_KEYIN4, GPIO_FN_KEYIN5,
+ GPIO_FN_KEYIN6, GPIO_FN_KEYIN7,
+ GPIO_FN_KEYOUT0, GPIO_FN_KEYOUT1, GPIO_FN_KEYOUT2,
+ GPIO_FN_KEYOUT3, GPIO_FN_KEYOUT4, GPIO_FN_KEYOUT5,
+ GPIO_FN_KEYOUT6, GPIO_FN_KEYOUT7,
+
+ GPIO_FN_KEYIN0_PORT43, /* MSEL4CR_18_0 */
+ GPIO_FN_KEYIN1_PORT44,
+ GPIO_FN_KEYIN2_PORT45,
+ GPIO_FN_KEYIN3_PORT46,
+
+ GPIO_FN_KEYIN0_PORT58, /* MSEL4CR_18_1 */
+ GPIO_FN_KEYIN1_PORT57,
+ GPIO_FN_KEYIN2_PORT56,
+ GPIO_FN_KEYIN3_PORT55,
+
+ /* VOU */
+ GPIO_FN_DV_D0, GPIO_FN_DV_D1, GPIO_FN_DV_D2, GPIO_FN_DV_D3,
+ GPIO_FN_DV_D4, GPIO_FN_DV_D5, GPIO_FN_DV_D6, GPIO_FN_DV_D7,
+ GPIO_FN_DV_D8, GPIO_FN_DV_D9, GPIO_FN_DV_D10, GPIO_FN_DV_D11,
+ GPIO_FN_DV_D12, GPIO_FN_DV_D13, GPIO_FN_DV_D14, GPIO_FN_DV_D15,
+ GPIO_FN_DV_CLK,
+ GPIO_FN_DV_VSYNC,
+ GPIO_FN_DV_HSYNC,
+
+ /* MEMC */
+ GPIO_FN_MEMC_AD0, GPIO_FN_MEMC_AD1, GPIO_FN_MEMC_AD2,
+ GPIO_FN_MEMC_AD3, GPIO_FN_MEMC_AD4, GPIO_FN_MEMC_AD5,
+ GPIO_FN_MEMC_AD6, GPIO_FN_MEMC_AD7, GPIO_FN_MEMC_AD8,
+ GPIO_FN_MEMC_AD9, GPIO_FN_MEMC_AD10, GPIO_FN_MEMC_AD11,
+ GPIO_FN_MEMC_AD12, GPIO_FN_MEMC_AD13, GPIO_FN_MEMC_AD14,
+ GPIO_FN_MEMC_AD15, GPIO_FN_MEMC_CS0, GPIO_FN_MEMC_INT,
+ GPIO_FN_MEMC_NWE, GPIO_FN_MEMC_NOE,
+
+ GPIO_FN_MEMC_CS1, /* MSEL4CR_6_0 */
+ GPIO_FN_MEMC_ADV,
+ GPIO_FN_MEMC_WAIT,
+ GPIO_FN_MEMC_BUSCLK,
+
+ GPIO_FN_MEMC_A1, /* MSEL4CR_6_1 */
+ GPIO_FN_MEMC_DREQ0,
+ GPIO_FN_MEMC_DREQ1,
+ GPIO_FN_MEMC_A0,
+
+ /* MMC */
+ GPIO_FN_MMC0_D0_PORT68, GPIO_FN_MMC0_D1_PORT69,
+ GPIO_FN_MMC0_D2_PORT70, GPIO_FN_MMC0_D3_PORT71,
+ GPIO_FN_MMC0_D4_PORT72, GPIO_FN_MMC0_D5_PORT73,
+ GPIO_FN_MMC0_D6_PORT74, GPIO_FN_MMC0_D7_PORT75,
+ GPIO_FN_MMC0_CLK_PORT66,
+ GPIO_FN_MMC0_CMD_PORT67, /* MSEL4CR_15_0 */
+
+ GPIO_FN_MMC1_D0_PORT149, GPIO_FN_MMC1_D1_PORT148,
+ GPIO_FN_MMC1_D2_PORT147, GPIO_FN_MMC1_D3_PORT146,
+ GPIO_FN_MMC1_D4_PORT145, GPIO_FN_MMC1_D5_PORT144,
+ GPIO_FN_MMC1_D6_PORT143, GPIO_FN_MMC1_D7_PORT142,
+ GPIO_FN_MMC1_CLK_PORT103,
+ GPIO_FN_MMC1_CMD_PORT104, /* MSEL4CR_15_1 */
+
+ /* MSIOF0 */
+ GPIO_FN_MSIOF0_SS1, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_MSIOF0_RXD, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_MSIOF0_MCK0, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_MSIOF0_RSYNC, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_MSIOF0_TSCK, GPIO_FN_MSIOF0_TSYNC,
+
+ /* MSIOF1 */
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_MSIOF1_RSYNC,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_MSIOF1_MCK1,
+
+ GPIO_FN_MSIOF1_SS2_PORT116, GPIO_FN_MSIOF1_SS1_PORT117,
+ GPIO_FN_MSIOF1_RXD_PORT118, GPIO_FN_MSIOF1_TXD_PORT119,
+ GPIO_FN_MSIOF1_TSYNC_PORT120,
+ GPIO_FN_MSIOF1_TSCK_PORT121, /* MSEL4CR_10_0 */
+
+ GPIO_FN_MSIOF1_SS1_PORT67, GPIO_FN_MSIOF1_TSCK_PORT72,
+ GPIO_FN_MSIOF1_TSYNC_PORT73, GPIO_FN_MSIOF1_TXD_PORT74,
+ GPIO_FN_MSIOF1_RXD_PORT75,
+ GPIO_FN_MSIOF1_SS2_PORT202, /* MSEL4CR_10_1 */
+
+ /* GPIO */
+ GPIO_FN_GPO0, GPIO_FN_GPI0,
+ GPIO_FN_GPO1, GPIO_FN_GPI1,
+
+ /* USB0 */
+ GPIO_FN_USB0_OCI, GPIO_FN_USB0_PPON, GPIO_FN_VBUS,
+
+ /* USB1 */
+ GPIO_FN_USB1_OCI, GPIO_FN_USB1_PPON,
+
+ /* BBIF1 */
+ GPIO_FN_BBIF1_RXD, GPIO_FN_BBIF1_TXD, GPIO_FN_BBIF1_TSYNC,
+ GPIO_FN_BBIF1_TSCK, GPIO_FN_BBIF1_RSCK, GPIO_FN_BBIF1_RSYNC,
+ GPIO_FN_BBIF1_FLOW, GPIO_FN_BBIF1_RX_FLOW_N,
+
+ /* BBIF2 */
+ GPIO_FN_BBIF2_TXD2_PORT5, /* MSEL5CR_0_0 */
+ GPIO_FN_BBIF2_RXD2_PORT60,
+ GPIO_FN_BBIF2_TSYNC2_PORT6,
+ GPIO_FN_BBIF2_TSCK2_PORT59,
+
+ GPIO_FN_BBIF2_RXD2_PORT90, /* MSEL5CR_0_1 */
+ GPIO_FN_BBIF2_TXD2_PORT183,
+ GPIO_FN_BBIF2_TSCK2_PORT89,
+ GPIO_FN_BBIF2_TSYNC2_PORT184,
+
+ /* BSC / FLCTL / PCMCIA */
+ GPIO_FN_CS0, GPIO_FN_CS2, GPIO_FN_CS4,
+ GPIO_FN_CS5B, GPIO_FN_CS6A,
+ GPIO_FN_CS5A_PORT105, /* CS5A PORT 19/105 */
+ GPIO_FN_CS5A_PORT19,
+ GPIO_FN_IOIS16, /* ? */
+
+ GPIO_FN_A0, GPIO_FN_A1, GPIO_FN_A2, GPIO_FN_A3,
+ GPIO_FN_A4_FOE, /* share with FLCTL */
+ GPIO_FN_A5_FCDE, /* share with FLCTL */
+ GPIO_FN_A6, GPIO_FN_A7, GPIO_FN_A8, GPIO_FN_A9,
+ GPIO_FN_A10, GPIO_FN_A11, GPIO_FN_A12, GPIO_FN_A13,
+ GPIO_FN_A14, GPIO_FN_A15, GPIO_FN_A16, GPIO_FN_A17,
+ GPIO_FN_A18, GPIO_FN_A19, GPIO_FN_A20, GPIO_FN_A21,
+ GPIO_FN_A22, GPIO_FN_A23, GPIO_FN_A24, GPIO_FN_A25,
+ GPIO_FN_A26,
+
+ GPIO_FN_D0_NAF0, GPIO_FN_D1_NAF1, /* share with FLCTL */
+ GPIO_FN_D2_NAF2, GPIO_FN_D3_NAF3, /* share with FLCTL */
+ GPIO_FN_D4_NAF4, GPIO_FN_D5_NAF5, /* share with FLCTL */
+ GPIO_FN_D6_NAF6, GPIO_FN_D7_NAF7, /* share with FLCTL */
+ GPIO_FN_D8_NAF8, GPIO_FN_D9_NAF9, /* share with FLCTL */
+ GPIO_FN_D10_NAF10, GPIO_FN_D11_NAF11, /* share with FLCTL */
+ GPIO_FN_D12_NAF12, GPIO_FN_D13_NAF13, /* share with FLCTL */
+ GPIO_FN_D14_NAF14, GPIO_FN_D15_NAF15, /* share with FLCTL */
+
+ GPIO_FN_D16, GPIO_FN_D17, GPIO_FN_D18, GPIO_FN_D19,
+ GPIO_FN_D20, GPIO_FN_D21, GPIO_FN_D22, GPIO_FN_D23,
+ GPIO_FN_D24, GPIO_FN_D25, GPIO_FN_D26, GPIO_FN_D27,
+ GPIO_FN_D28, GPIO_FN_D29, GPIO_FN_D30, GPIO_FN_D31,
+
+ GPIO_FN_WE0_FWE, /* share with FLCTL */
+ GPIO_FN_WE1,
+ GPIO_FN_WE2_ICIORD, /* share with PCMCIA */
+ GPIO_FN_WE3_ICIOWR, /* share with PCMCIA */
+ GPIO_FN_CKO, GPIO_FN_BS, GPIO_FN_RDWR,
+ GPIO_FN_RD_FSC, /* share with FLCTL */
+ GPIO_FN_WAIT_PORT177, /* WAIT Port 90/177 */
+ GPIO_FN_WAIT_PORT90,
+
+ GPIO_FN_FCE0, GPIO_FN_FCE1, GPIO_FN_FRB, /* FLCTL */
+
+ /* IRDA */
+ GPIO_FN_IRDA_FIRSEL, GPIO_FN_IRDA_IN, GPIO_FN_IRDA_OUT,
+
+ /* ATAPI */
+ GPIO_FN_IDE_D0, GPIO_FN_IDE_D1, GPIO_FN_IDE_D2,
+ GPIO_FN_IDE_D3, GPIO_FN_IDE_D4, GPIO_FN_IDE_D5,
+ GPIO_FN_IDE_D6, GPIO_FN_IDE_D7, GPIO_FN_IDE_D8,
+ GPIO_FN_IDE_D9, GPIO_FN_IDE_D10, GPIO_FN_IDE_D11,
+ GPIO_FN_IDE_D12, GPIO_FN_IDE_D13, GPIO_FN_IDE_D14,
+ GPIO_FN_IDE_D15, GPIO_FN_IDE_A0, GPIO_FN_IDE_A1,
+ GPIO_FN_IDE_A2, GPIO_FN_IDE_CS0, GPIO_FN_IDE_CS1,
+ GPIO_FN_IDE_IOWR, GPIO_FN_IDE_IORD, GPIO_FN_IDE_IORDY,
+ GPIO_FN_IDE_INT, GPIO_FN_IDE_RST, GPIO_FN_IDE_DIRECTION,
+ GPIO_FN_IDE_EXBUF_ENB, GPIO_FN_IDE_IODACK, GPIO_FN_IDE_IODREQ,
+
+ /* RMII */
+ GPIO_FN_RMII_CRS_DV, GPIO_FN_RMII_RX_ER, GPIO_FN_RMII_RXD0,
+ GPIO_FN_RMII_RXD1, GPIO_FN_RMII_TX_EN, GPIO_FN_RMII_TXD0,
+ GPIO_FN_RMII_MDC, GPIO_FN_RMII_TXD1, GPIO_FN_RMII_MDIO,
+ GPIO_FN_RMII_REF50CK, /* for RMII */
+ GPIO_FN_RMII_REF125CK, /* for GMII */
+
+ /* GEther */
+ GPIO_FN_ET_TX_CLK, GPIO_FN_ET_TX_EN, GPIO_FN_ET_ETXD0,
+ GPIO_FN_ET_ETXD1, GPIO_FN_ET_ETXD2, GPIO_FN_ET_ETXD3,
+ GPIO_FN_ET_ETXD4, GPIO_FN_ET_ETXD5, /* for GEther */
+ GPIO_FN_ET_ETXD6, GPIO_FN_ET_ETXD7, /* for GEther */
+ GPIO_FN_ET_COL, GPIO_FN_ET_TX_ER,
+ GPIO_FN_ET_RX_CLK, GPIO_FN_ET_RX_DV,
+ GPIO_FN_ET_ERXD0, GPIO_FN_ET_ERXD1,
+ GPIO_FN_ET_ERXD2, GPIO_FN_ET_ERXD3,
+ GPIO_FN_ET_ERXD4, GPIO_FN_ET_ERXD5, /* for GEther */
+ GPIO_FN_ET_ERXD6, GPIO_FN_ET_ERXD7, /* for GEther */
+ GPIO_FN_ET_RX_ER, GPIO_FN_ET_CRS,
+ GPIO_FN_ET_MDC, GPIO_FN_ET_MDIO,
+ GPIO_FN_ET_LINK, GPIO_FN_ET_PHY_INT,
+ GPIO_FN_ET_WOL, GPIO_FN_ET_GTX_CLK,
+
+ /* DMA0 */
+ GPIO_FN_DREQ0, GPIO_FN_DACK0,
+
+ /* DMA1 */
+ GPIO_FN_DREQ1, GPIO_FN_DACK1,
+
+ /* SYSC */
+ GPIO_FN_RESETOUTS,
+ GPIO_FN_RESETP_PULLUP,
+ GPIO_FN_RESETP_PLAIN,
+
+ /* SDENC */
+ GPIO_FN_SDENC_CPG,
+ GPIO_FN_SDENC_DV_CLKI,
+
+ /* IRREM */
+ GPIO_FN_IROUT,
+
+ /* DEBUG */
+ GPIO_FN_EDEBGREQ_PULLDOWN,
+ GPIO_FN_EDEBGREQ_PULLUP,
+
+ GPIO_FN_TRACEAUD_FROM_VIO,
+ GPIO_FN_TRACEAUD_FROM_LCDC0,
+ GPIO_FN_TRACEAUD_FROM_MEMC,
+};
+
+#endif /* __ASM_R8A7740_H__ */
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_R8A7740_H
+#define __ASM_ARCH_R8A7740_H
+
+/*
+ * R8A7740 I/O Addresses
+ */
+
+#define MERAM_BASE 0xE5580000
+#define DDRP_BASE 0xC12A0000
+#define HPB_BASE 0xE6000000
+#define RWDT0_BASE 0xE6020000
+#define RWDT1_BASE 0xE6030000
+#define GPIO_BASE 0xE6050000
+#define CMT1_BASE 0xE6138000
+#define CPG_BASE 0xE6150000
+#define SYSC_BASE 0xE6180000
+#define SDHI0_BASE 0xE6850000
+#define SDHI1_BASE 0xE6860000
+#define MMCIF_BASE 0xE6BD0000
+#define SCIF5_BASE 0xE6CB0000
+#define SCIF6_BASE 0xE6CC0000
+#define DBSC_BASE 0xFE400000
+#define BSC_BASE 0xFEC10000
+#define I2C0_BASE 0xFFF20000
+#define I2C1_BASE 0xE6C20000
+#define TMU_BASE 0xFFF80000
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct r8a7740_rwdt {
+ u16 rwtcnt0; /* 0x00 */
+ u16 dummy0; /* 0x02 */
+ u16 rwtcsra0; /* 0x04 */
+ u16 dummy1; /* 0x06 */
+ u16 rwtcsrb0; /* 0x08 */
+ u16 dummy2; /* 0x0A */
+};
+
+/* HPB Semaphore Control Registers */
+struct r8a7740_hpb {
+ u32 hpbctrl0;
+ u32 hpbctrl1;
+ u32 hpbctrl2;
+ u32 cccr;
+ u32 dummy0; /* 0x20 */
+ u32 hpbctrl4;
+ u32 hpbctrl5;
+};
+
+/* CPG */
+struct r8a7740_cpg {
+ u32 frqcra;
+ u32 frqcrb;
+ u32 vclkcr1;
+ u32 vclkcr2;
+ u32 fmsickcr;
+ u32 fmsockcr;
+ u32 fsiackcr;
+ u32 dummy0; /* 0x1c */
+ u32 rtstbcr;
+ u32 systbcr;
+ u32 pllc01cr;
+ u32 pllc2cr;
+ u32 mstpsr0;
+ u32 dummy1; /* 0x34 */
+ u32 mstpsr1;
+ u32 mstpsr5;
+ u32 mstpsr2;
+ u32 dummy2; /* 0x44 */
+ u32 mstpsr3;
+ u32 mstpsr4;
+ u32 dummy3; /* 0x50 */
+ u32 astat;
+ u32 dummy4[4]; /* 0x58 .. 0x64 */
+ u32 ztrckcr;
+ u32 dummy5[5]; /* 0x6c .. 0x7c */
+ u32 subckcr;
+ u32 spuckcr;
+ u32 vouckcr;
+ u32 usbckcr;
+ u32 dummy6[3]; /* 0x90 .. 0x98 */
+ u32 stprckcr;
+ u32 srcr0;
+ u32 dummy7; /* 0xa4 */
+ u32 srcr1;
+ u32 dummy8; /* 0xac */
+ u32 srcr2;
+ u32 dummy9; /* 0xb4 */
+ u32 srcr3;
+ u32 srcr4;
+ u32 dummy10; /* 0xc0 */
+ u32 srcr5;
+ u32 pllc01stpcr;
+ u32 dummy11[5]; /* 0xcc .. 0xdc */
+ u32 frqcrc;
+ u32 frqcrd;
+ u32 dummy12[10]; /* 0xe8 .. 0x10c */
+ u32 rmstpcr0;
+ u32 rmstpcr1;
+ u32 rmstpcr2;
+ u32 rmstpcr3;
+ u32 rmstpcr4;
+ u32 rmstpcr5;
+ u32 dummy13[2]; /* 0x128 .. 0x12c */
+ u32 smstpcr0;
+ u32 smstpcr1;
+ u32 smstpcr2;
+ u32 smstpcr3;
+ u32 smstpcr4;
+ u32 smstpcr5;
+};
+
+/* BSC */
+struct r8a7740_bsc {
+ u32 cmncr;
+ u32 cs0bcr;
+ u32 cs2bcr;
+ u32 dummy0; /* 0x0c */
+ u32 cs4bcr;
+ u32 cs5abcr;
+ u32 cs5bbcr;
+ u32 cs6abcr;
+ u32 dummy1; /* 0x20 */
+ u32 cs0wcr;
+ u32 cs2wcr;
+ u32 dummy2; /* 0x2c */
+ u32 cs4wcr;
+ u32 cs5awcr;
+ u32 cs5bwcr;
+ u32 cs6awcr;
+ u32 dummy3[5]; /* 0x40 .. 0x50 */
+ u32 rbwtcnt;
+ u32 busycr;
+ u32 dummy4[5]; /* 0x5c .. 0x6c */
+ u32 bromtimcr;
+ u32 dummy5[7]; /* 0x74 .. 0x8c */
+ u32 bptcr00;
+ u32 bptcr01;
+ u32 bptcr02;
+ u32 bptcr03;
+ u32 bptcr04;
+ u32 bptcr05;
+ u32 bptcr06;
+ u32 bptcr07;
+ u32 bptcr08;
+ u32 bptcr09;
+ u32 bptcr10;
+ u32 bptcr11;
+ u32 bptcr12;
+ u32 bptcr13;
+ u32 bptcr14;
+ u32 bptcr15;
+ u32 bptcr16;
+ u32 bptcr17;
+ u32 bptcr18;
+ u32 bptcr19;
+ u32 bptcr20;
+ u32 bptcr21;
+ u32 bptcr22;
+ u32 bptcr23;
+ u32 bptcr24;
+ u32 bptcr25;
+ u32 bptcr26;
+ u32 bptcr27;
+ u32 bptcr28;
+ u32 bptcr29;
+ u32 bptcr30;
+ u32 bptcr31;
+ u32 bswcr;
+ u32 dummy6[68]; /* 0x114 .. 0x220 */
+ u32 cs0wcr2;
+ u32 cs2wcr2;
+ u32 dummy7; /* 0x22c */
+ u32 cs4wcr2;
+};
+
+#define CS0WCR2 0xFEC10224
+#define CS2WCR2 0xFEC10228
+#define CS4WCR2 0xFEC10230
+
+/* DDRP */
+struct r8a7740_ddrp {
+ u32 funcctrl;
+ u32 dllctrl;
+ u32 zqcalctrl;
+ u32 zqodtctrl;
+ u32 rdctrl;
+ u32 rdtmg;
+ u32 fifoinit;
+ u32 outctrl;
+ u32 dummy0[50]; /* 0x20 .. 0xe4 */
+ u32 dqcalofs1;
+ u32 dqcalofs2;
+ u32 dummy1[2]; /* 0xf0 .. 0xf4 */
+ u32 dqcalexp;
+};
+
+#define DDRPNCNT 0xE605803C
+#define DDRVREFCNT 0xE61500EC
+
+/* DBSC */
+struct r8a7740_dbsc {
+ u32 dummy0;
+ u32 dbsvcr;
+ u32 dbstate0;
+ u32 dbstate1;
+ u32 dbacen;
+ u32 dbrfen;
+ u32 dbcmd;
+ u32 dbwait;
+ u32 dbkind;
+ u32 dbconf0;
+ u32 dummy1[2]; /* 0x28 .. 0x2c */
+ u32 dbphytype;
+ u32 dummy2[3]; /* 0x34 .. 0x3c */
+ u32 dbtr0;
+ u32 dbtr1;
+ u32 dbtr2;
+ u32 dummy3; /* 0x4c */
+ u32 dbtr3;
+ u32 dbtr4;
+ u32 dbtr5;
+ u32 dbtr6;
+ u32 dbtr7;
+ u32 dbtr8;
+ u32 dbtr9;
+ u32 dbtr10;
+ u32 dbtr11;
+ u32 dbtr12;
+ u32 dbtr13;
+ u32 dbtr14;
+ u32 dbtr15;
+ u32 dbtr16;
+ u32 dbtr17;
+ u32 dbtr18;
+ u32 dbtr19;
+ u32 dummy4[7]; /* 0x94 .. 0xac */
+ u32 dbbl;
+ u32 dummy5[3]; /* 0xb4 .. 0xbc */
+ u32 dbadj0;
+ u32 dbadj1;
+ u32 dbadj2;
+ u32 dummy6[5]; /* 0xcc .. 0xdc */
+ u32 dbrfcnf0;
+ u32 dbrfcnf1;
+ u32 dbrfcnf2;
+ u32 dbrfcnf3;
+ u32 dummy7; /* 0xf0 */
+ u32 dbcalcnf;
+ u32 dbcaltr;
+ u32 dummy8; /* 0xfc */;
+ u32 dbrnk0;
+ u32 dummy9[31]; /* 0x104 .. 0x17C */
+ u32 dbpdncnf;
+ u32 dummy10[7]; /* 0x184 .. 0x19C */
+ u32 dbmrrdr;
+ u32 dummy11[39]; /* 0x1A4 .. 0x23C */
+ u32 dbdfistat;
+ u32 dbdficnt;
+ u32 dummy12[46]; /* 0x248 .. 0x2FC */
+ u32 dbbs0cnt0;
+ u32 dbbs0cnt1;
+};
+
+#endif
+
+#endif /* __ASM_ARCH_R8A7740_H */
--- /dev/null
+#ifndef __ASM_ARCH_RMOBILE_H
+#define __ASM_ARCH_RMOBILE_H
+
+#if defined(CONFIG_RMOBILE)
+#if defined(CONFIG_SH73A0)
+#include <asm/arch/sh73a0.h>
+#elif defined(CONFIG_R8A7740)
+#include <asm/arch/r8a7740.h>
+#else
+#error "SOC Name not defined"
+#endif
+#endif /* CONFIG_RMOBILE */
+
+#endif /* __ASM_ARCH_RMOBILE_H */
--- /dev/null
+#ifndef __ASM_SH73A0_H__
+#define __ASM_SH73A0_H__
+
+/* Pin Function Controller:
+ * GPIO_FN_xx - GPIO used to select pin function and MSEL switch
+ * GPIO_PORTxx - GPIO mapped to real I/O pin on CPU
+ */
+enum {
+ /* Hardware manual Table 25-1 (GPIO) */
+ GPIO_PORT0, GPIO_PORT1, GPIO_PORT2, GPIO_PORT3, GPIO_PORT4,
+ GPIO_PORT5, GPIO_PORT6, GPIO_PORT7, GPIO_PORT8, GPIO_PORT9,
+
+ GPIO_PORT10, GPIO_PORT11, GPIO_PORT12, GPIO_PORT13, GPIO_PORT14,
+ GPIO_PORT15, GPIO_PORT16, GPIO_PORT17, GPIO_PORT18, GPIO_PORT19,
+
+ GPIO_PORT20, GPIO_PORT21, GPIO_PORT22, GPIO_PORT23, GPIO_PORT24,
+ GPIO_PORT25, GPIO_PORT26, GPIO_PORT27, GPIO_PORT28, GPIO_PORT29,
+
+ GPIO_PORT30, GPIO_PORT31, GPIO_PORT32, GPIO_PORT33, GPIO_PORT34,
+ GPIO_PORT35, GPIO_PORT36, GPIO_PORT37, GPIO_PORT38, GPIO_PORT39,
+
+ GPIO_PORT40, GPIO_PORT41, GPIO_PORT42, GPIO_PORT43, GPIO_PORT44,
+ GPIO_PORT45, GPIO_PORT46, GPIO_PORT47, GPIO_PORT48, GPIO_PORT49,
+
+ GPIO_PORT50, GPIO_PORT51, GPIO_PORT52, GPIO_PORT53, GPIO_PORT54,
+ GPIO_PORT55, GPIO_PORT56, GPIO_PORT57, GPIO_PORT58, GPIO_PORT59,
+
+ GPIO_PORT60, GPIO_PORT61, GPIO_PORT62, GPIO_PORT63, GPIO_PORT64,
+ GPIO_PORT65, GPIO_PORT66, GPIO_PORT67, GPIO_PORT68, GPIO_PORT69,
+
+ GPIO_PORT70, GPIO_PORT71, GPIO_PORT72, GPIO_PORT73, GPIO_PORT74,
+ GPIO_PORT75, GPIO_PORT76, GPIO_PORT77, GPIO_PORT78, GPIO_PORT79,
+
+ GPIO_PORT80, GPIO_PORT81, GPIO_PORT82, GPIO_PORT83, GPIO_PORT84,
+ GPIO_PORT85, GPIO_PORT86, GPIO_PORT87, GPIO_PORT88, GPIO_PORT89,
+
+ GPIO_PORT90, GPIO_PORT91, GPIO_PORT92, GPIO_PORT93, GPIO_PORT94,
+ GPIO_PORT95, GPIO_PORT96, GPIO_PORT97, GPIO_PORT98, GPIO_PORT99,
+
+ GPIO_PORT100, GPIO_PORT101, GPIO_PORT102, GPIO_PORT103, GPIO_PORT104,
+ GPIO_PORT105, GPIO_PORT106, GPIO_PORT107, GPIO_PORT108, GPIO_PORT109,
+
+ GPIO_PORT110, GPIO_PORT111, GPIO_PORT112, GPIO_PORT113, GPIO_PORT114,
+ GPIO_PORT115, GPIO_PORT116, GPIO_PORT117, GPIO_PORT118,
+
+ GPIO_PORT128, GPIO_PORT129,
+
+ GPIO_PORT130, GPIO_PORT131, GPIO_PORT132, GPIO_PORT133, GPIO_PORT134,
+ GPIO_PORT135, GPIO_PORT136, GPIO_PORT137, GPIO_PORT138, GPIO_PORT139,
+
+ GPIO_PORT140, GPIO_PORT141, GPIO_PORT142, GPIO_PORT143, GPIO_PORT144,
+ GPIO_PORT145, GPIO_PORT146, GPIO_PORT147, GPIO_PORT148, GPIO_PORT149,
+
+ GPIO_PORT150, GPIO_PORT151, GPIO_PORT152, GPIO_PORT153, GPIO_PORT154,
+ GPIO_PORT155, GPIO_PORT156, GPIO_PORT157, GPIO_PORT158, GPIO_PORT159,
+
+ GPIO_PORT160, GPIO_PORT161, GPIO_PORT162, GPIO_PORT163, GPIO_PORT164,
+
+ GPIO_PORT192, GPIO_PORT193, GPIO_PORT194,
+ GPIO_PORT195, GPIO_PORT196, GPIO_PORT197, GPIO_PORT198, GPIO_PORT199,
+
+ GPIO_PORT200, GPIO_PORT201, GPIO_PORT202, GPIO_PORT203, GPIO_PORT204,
+ GPIO_PORT205, GPIO_PORT206, GPIO_PORT207, GPIO_PORT208, GPIO_PORT209,
+
+ GPIO_PORT210, GPIO_PORT211, GPIO_PORT212, GPIO_PORT213, GPIO_PORT214,
+ GPIO_PORT215, GPIO_PORT216, GPIO_PORT217, GPIO_PORT218, GPIO_PORT219,
+
+ GPIO_PORT220, GPIO_PORT221, GPIO_PORT222, GPIO_PORT223, GPIO_PORT224,
+ GPIO_PORT225, GPIO_PORT226, GPIO_PORT227, GPIO_PORT228, GPIO_PORT229,
+
+ GPIO_PORT230, GPIO_PORT231, GPIO_PORT232, GPIO_PORT233, GPIO_PORT234,
+ GPIO_PORT235, GPIO_PORT236, GPIO_PORT237, GPIO_PORT238, GPIO_PORT239,
+
+ GPIO_PORT240, GPIO_PORT241, GPIO_PORT242, GPIO_PORT243, GPIO_PORT244,
+ GPIO_PORT245, GPIO_PORT246, GPIO_PORT247, GPIO_PORT248, GPIO_PORT249,
+
+ GPIO_PORT250, GPIO_PORT251, GPIO_PORT252, GPIO_PORT253, GPIO_PORT254,
+ GPIO_PORT255, GPIO_PORT256, GPIO_PORT257, GPIO_PORT258, GPIO_PORT259,
+
+ GPIO_PORT260, GPIO_PORT261, GPIO_PORT262, GPIO_PORT263, GPIO_PORT264,
+ GPIO_PORT265, GPIO_PORT266, GPIO_PORT267, GPIO_PORT268, GPIO_PORT269,
+
+ GPIO_PORT270, GPIO_PORT271, GPIO_PORT272, GPIO_PORT273, GPIO_PORT274,
+ GPIO_PORT275, GPIO_PORT276, GPIO_PORT277, GPIO_PORT278, GPIO_PORT279,
+
+ GPIO_PORT280, GPIO_PORT281, GPIO_PORT282,
+
+ GPIO_PORT288, GPIO_PORT289,
+
+ GPIO_PORT290, GPIO_PORT291, GPIO_PORT292, GPIO_PORT293, GPIO_PORT294,
+ GPIO_PORT295, GPIO_PORT296, GPIO_PORT297, GPIO_PORT298, GPIO_PORT299,
+
+ GPIO_PORT300, GPIO_PORT301, GPIO_PORT302, GPIO_PORT303, GPIO_PORT304,
+ GPIO_PORT305, GPIO_PORT306, GPIO_PORT307, GPIO_PORT308, GPIO_PORT309,
+
+ /* Table 25-1 (Function 0-7) */
+ GPIO_FN_VBUS_0,
+ GPIO_FN_GPI0,
+ GPIO_FN_GPI1,
+ GPIO_FN_GPI2,
+ GPIO_FN_GPI3,
+ GPIO_FN_GPI4,
+ GPIO_FN_GPI5,
+ GPIO_FN_GPI6,
+ GPIO_FN_GPI7,
+ GPIO_FN_SCIFA7_RXD,
+ GPIO_FN_SCIFA7_CTS_,
+ GPIO_FN_GPO7, GPIO_FN_MFG0_OUT2,
+ GPIO_FN_GPO6, GPIO_FN_MFG1_OUT2,
+ GPIO_FN_GPO5, GPIO_FN_SCIFA0_SCK, GPIO_FN_FSICOSLDT3, \
+ GPIO_FN_PORT16_VIO_CKOR,
+ GPIO_FN_SCIFA0_TXD,
+ GPIO_FN_SCIFA7_TXD,
+ GPIO_FN_SCIFA7_RTS_, GPIO_FN_PORT19_VIO_CKO2,
+ GPIO_FN_GPO0,
+ GPIO_FN_GPO1,
+ GPIO_FN_GPO2, GPIO_FN_STATUS0,
+ GPIO_FN_GPO3, GPIO_FN_STATUS1,
+ GPIO_FN_GPO4, GPIO_FN_STATUS2,
+ GPIO_FN_VINT,
+ GPIO_FN_TCKON,
+ GPIO_FN_XDVFS1, GPIO_FN_PORT27_I2C_SCL2, GPIO_FN_PORT27_I2C_SCL3, \
+ GPIO_FN_MFG0_OUT1, GPIO_FN_PORT27_IROUT,
+ GPIO_FN_XDVFS2, GPIO_FN_PORT28_I2C_SDA2, GPIO_FN_PORT28_I2C_SDA3, \
+ GPIO_FN_PORT28_TPU1TO1,
+ GPIO_FN_SIM_RST, GPIO_FN_PORT29_TPU1TO1,
+ GPIO_FN_SIM_CLK, GPIO_FN_PORT30_VIO_CKOR,
+ GPIO_FN_SIM_D, GPIO_FN_PORT31_IROUT,
+ GPIO_FN_SCIFA4_TXD,
+ GPIO_FN_SCIFA4_RXD, GPIO_FN_XWUP,
+ GPIO_FN_SCIFA4_RTS_,
+ GPIO_FN_SCIFA4_CTS_,
+ GPIO_FN_FSIBOBT, GPIO_FN_FSIBIBT,
+ GPIO_FN_FSIBOLR, GPIO_FN_FSIBILR,
+ GPIO_FN_FSIBOSLD,
+ GPIO_FN_FSIBISLD,
+ GPIO_FN_VACK,
+ GPIO_FN_XTAL1L,
+ GPIO_FN_SCIFA0_RTS_, GPIO_FN_FSICOSLDT2,
+ GPIO_FN_SCIFA0_RXD,
+ GPIO_FN_SCIFA0_CTS_, GPIO_FN_FSICOSLDT1,
+ GPIO_FN_FSICOBT, GPIO_FN_FSICIBT, GPIO_FN_FSIDOBT, GPIO_FN_FSIDIBT,
+ GPIO_FN_FSICOLR, GPIO_FN_FSICILR, GPIO_FN_FSIDOLR, GPIO_FN_FSIDILR,
+ GPIO_FN_FSICOSLD, GPIO_FN_PORT47_FSICSPDIF,
+ GPIO_FN_FSICISLD, GPIO_FN_FSIDISLD,
+ GPIO_FN_FSIACK, GPIO_FN_PORT49_IRDA_OUT, GPIO_FN_PORT49_IROUT, \
+ GPIO_FN_FSIAOMC,
+ GPIO_FN_FSIAOLR, GPIO_FN_BBIF2_TSYNC2, GPIO_FN_TPU2TO2, GPIO_FN_FSIAILR,
+
+ GPIO_FN_FSIAOBT, GPIO_FN_BBIF2_TSCK2, GPIO_FN_TPU2TO3, GPIO_FN_FSIAIBT,
+ GPIO_FN_FSIAOSLD, GPIO_FN_BBIF2_TXD2,
+ GPIO_FN_FSIASPDIF, GPIO_FN_PORT53_IRDA_IN, GPIO_FN_TPU3TO3, \
+ GPIO_FN_FSIBSPDIF, GPIO_FN_PORT53_FSICSPDIF,
+ GPIO_FN_FSIBCK, GPIO_FN_PORT54_IRDA_FIRSEL, GPIO_FN_TPU3TO2, \
+ GPIO_FN_FSIBOMC, GPIO_FN_FSICCK, GPIO_FN_FSICOMC,
+ GPIO_FN_FSIAISLD, GPIO_FN_TPU0TO0,
+ GPIO_FN_A0, GPIO_FN_BS_,
+ GPIO_FN_A12, GPIO_FN_PORT58_KEYOUT7, GPIO_FN_TPU4TO2,
+ GPIO_FN_A13, GPIO_FN_PORT59_KEYOUT6, GPIO_FN_TPU0TO1,
+ GPIO_FN_A14, GPIO_FN_KEYOUT5,
+ GPIO_FN_A15, GPIO_FN_KEYOUT4,
+ GPIO_FN_A16, GPIO_FN_KEYOUT3, GPIO_FN_MSIOF0_SS1,
+ GPIO_FN_A17, GPIO_FN_KEYOUT2, GPIO_FN_MSIOF0_TSYNC,
+ GPIO_FN_A18, GPIO_FN_KEYOUT1, GPIO_FN_MSIOF0_TSCK,
+ GPIO_FN_A19, GPIO_FN_KEYOUT0, GPIO_FN_MSIOF0_TXD,
+ GPIO_FN_A20, GPIO_FN_KEYIN0, GPIO_FN_MSIOF0_RSCK,
+ GPIO_FN_A21, GPIO_FN_KEYIN1, GPIO_FN_MSIOF0_RSYNC,
+ GPIO_FN_A22, GPIO_FN_KEYIN2, GPIO_FN_MSIOF0_MCK0,
+ GPIO_FN_A23, GPIO_FN_KEYIN3, GPIO_FN_MSIOF0_MCK1,
+ GPIO_FN_A24, GPIO_FN_KEYIN4, GPIO_FN_MSIOF0_RXD,
+ GPIO_FN_A25, GPIO_FN_KEYIN5, GPIO_FN_MSIOF0_SS2,
+ GPIO_FN_A26, GPIO_FN_KEYIN6,
+ GPIO_FN_KEYIN7,
+ GPIO_FN_D0_NAF0,
+ GPIO_FN_D1_NAF1,
+ GPIO_FN_D2_NAF2,
+ GPIO_FN_D3_NAF3,
+ GPIO_FN_D4_NAF4,
+ GPIO_FN_D5_NAF5,
+ GPIO_FN_D6_NAF6,
+ GPIO_FN_D7_NAF7,
+ GPIO_FN_D8_NAF8,
+ GPIO_FN_D9_NAF9,
+ GPIO_FN_D10_NAF10,
+ GPIO_FN_D11_NAF11,
+ GPIO_FN_D12_NAF12,
+ GPIO_FN_D13_NAF13,
+ GPIO_FN_D14_NAF14,
+ GPIO_FN_D15_NAF15,
+ GPIO_FN_CS4_,
+ GPIO_FN_CS5A_, GPIO_FN_PORT91_RDWR,
+ GPIO_FN_CS5B_, GPIO_FN_FCE1_,
+ GPIO_FN_CS6B_, GPIO_FN_DACK0,
+ GPIO_FN_FCE0_, GPIO_FN_CS6A_,
+ GPIO_FN_WAIT_, GPIO_FN_DREQ0,
+ GPIO_FN_RD__FSC,
+ GPIO_FN_WE0__FWE, GPIO_FN_RDWR_FWE,
+ GPIO_FN_WE1_,
+ GPIO_FN_FRB,
+ GPIO_FN_CKO,
+ GPIO_FN_NBRSTOUT_,
+ GPIO_FN_NBRST_,
+ GPIO_FN_BBIF2_TXD,
+ GPIO_FN_BBIF2_RXD,
+ GPIO_FN_BBIF2_SYNC,
+ GPIO_FN_BBIF2_SCK,
+ GPIO_FN_SCIFA3_CTS_, GPIO_FN_MFG3_IN2,
+ GPIO_FN_SCIFA3_RXD, GPIO_FN_MFG3_IN1,
+ GPIO_FN_BBIF1_SS2, GPIO_FN_SCIFA3_RTS_, GPIO_FN_MFG3_OUT1,
+ GPIO_FN_SCIFA3_TXD,
+ GPIO_FN_HSI_RX_DATA, GPIO_FN_BBIF1_RXD,
+ GPIO_FN_HSI_TX_WAKE, GPIO_FN_BBIF1_TSCK,
+ GPIO_FN_HSI_TX_DATA, GPIO_FN_BBIF1_TSYNC,
+ GPIO_FN_HSI_TX_READY, GPIO_FN_BBIF1_TXD,
+ GPIO_FN_HSI_RX_READY, GPIO_FN_BBIF1_RSCK, GPIO_FN_PORT115_I2C_SCL2, \
+ GPIO_FN_PORT115_I2C_SCL3,
+ GPIO_FN_HSI_RX_WAKE, GPIO_FN_BBIF1_RSYNC, GPIO_FN_PORT116_I2C_SDA2, \
+ GPIO_FN_PORT116_I2C_SDA3,
+ GPIO_FN_HSI_RX_FLAG, GPIO_FN_BBIF1_SS1, GPIO_FN_BBIF1_FLOW,
+ GPIO_FN_HSI_TX_FLAG,
+ GPIO_FN_VIO_VD, GPIO_FN_PORT128_LCD2VSYN, GPIO_FN_VIO2_VD, \
+ GPIO_FN_LCD2D0,
+
+ GPIO_FN_VIO_HD, GPIO_FN_PORT129_LCD2HSYN, GPIO_FN_PORT129_LCD2CS_, \
+ GPIO_FN_VIO2_HD, GPIO_FN_LCD2D1,
+ GPIO_FN_VIO_D0, GPIO_FN_PORT130_MSIOF2_RXD, GPIO_FN_LCD2D10,
+ GPIO_FN_VIO_D1, GPIO_FN_PORT131_KEYOUT6, GPIO_FN_PORT131_MSIOF2_SS1, \
+ GPIO_FN_PORT131_KEYOUT11, GPIO_FN_LCD2D11,
+ GPIO_FN_VIO_D2, GPIO_FN_PORT132_KEYOUT7, GPIO_FN_PORT132_MSIOF2_SS2, \
+ GPIO_FN_PORT132_KEYOUT10, GPIO_FN_LCD2D12,
+ GPIO_FN_VIO_D3, GPIO_FN_MSIOF2_TSYNC, GPIO_FN_LCD2D13,
+ GPIO_FN_VIO_D4, GPIO_FN_MSIOF2_TXD, GPIO_FN_LCD2D14,
+ GPIO_FN_VIO_D5, GPIO_FN_MSIOF2_TSCK, GPIO_FN_LCD2D15,
+ GPIO_FN_VIO_D6, GPIO_FN_PORT136_KEYOUT8, GPIO_FN_LCD2D16,
+ GPIO_FN_VIO_D7, GPIO_FN_PORT137_KEYOUT9, GPIO_FN_LCD2D17,
+ GPIO_FN_VIO_D8, GPIO_FN_PORT138_KEYOUT8, GPIO_FN_VIO2_D0, \
+ GPIO_FN_LCD2D6,
+ GPIO_FN_VIO_D9, GPIO_FN_PORT139_KEYOUT9, GPIO_FN_VIO2_D1, \
+ GPIO_FN_LCD2D7,
+ GPIO_FN_VIO_D10, GPIO_FN_TPU0TO2, GPIO_FN_VIO2_D2, GPIO_FN_LCD2D8,
+ GPIO_FN_VIO_D11, GPIO_FN_TPU0TO3, GPIO_FN_VIO2_D3, GPIO_FN_LCD2D9,
+ GPIO_FN_VIO_D12, GPIO_FN_PORT142_KEYOUT10, GPIO_FN_VIO2_D4, \
+ GPIO_FN_LCD2D2,
+ GPIO_FN_VIO_D13, GPIO_FN_PORT143_KEYOUT11, GPIO_FN_PORT143_KEYOUT6, \
+ GPIO_FN_VIO2_D5, GPIO_FN_LCD2D3,
+ GPIO_FN_VIO_D14, GPIO_FN_PORT144_KEYOUT7, GPIO_FN_VIO2_D6, \
+ GPIO_FN_LCD2D4,
+ GPIO_FN_VIO_D15, GPIO_FN_TPU1TO3, GPIO_FN_PORT145_LCD2DISP, \
+ GPIO_FN_PORT145_LCD2RS, GPIO_FN_VIO2_D7, GPIO_FN_LCD2D5,
+ GPIO_FN_VIO_CLK, GPIO_FN_LCD2DCK, GPIO_FN_PORT146_LCD2WR_, \
+ GPIO_FN_VIO2_CLK, GPIO_FN_LCD2D18,
+ GPIO_FN_VIO_FIELD, GPIO_FN_LCD2RD_, GPIO_FN_VIO2_FIELD, GPIO_FN_LCD2D19,
+ GPIO_FN_VIO_CKO,
+ GPIO_FN_A27, GPIO_FN_PORT149_RDWR, GPIO_FN_MFG0_IN1, \
+ GPIO_FN_PORT149_KEYOUT9,
+ GPIO_FN_MFG0_IN2,
+ GPIO_FN_TS_SPSYNC3, GPIO_FN_MSIOF2_RSCK,
+ GPIO_FN_TS_SDAT3, GPIO_FN_MSIOF2_RSYNC,
+ GPIO_FN_TPU1TO2, GPIO_FN_TS_SDEN3, GPIO_FN_PORT153_MSIOF2_SS1,
+ GPIO_FN_SCIFA2_TXD1, GPIO_FN_MSIOF2_MCK0,
+ GPIO_FN_SCIFA2_RXD1, GPIO_FN_MSIOF2_MCK1,
+ GPIO_FN_SCIFA2_RTS1_, GPIO_FN_PORT156_MSIOF2_SS2,
+ GPIO_FN_SCIFA2_CTS1_, GPIO_FN_PORT157_MSIOF2_RXD,
+ GPIO_FN_DINT_, GPIO_FN_SCIFA2_SCK1, GPIO_FN_TS_SCK3,
+ GPIO_FN_PORT159_SCIFB_SCK, GPIO_FN_PORT159_SCIFA5_SCK, GPIO_FN_NMI,
+ GPIO_FN_PORT160_SCIFB_TXD, GPIO_FN_PORT160_SCIFA5_TXD,
+ GPIO_FN_PORT161_SCIFB_CTS_, GPIO_FN_PORT161_SCIFA5_CTS_,
+ GPIO_FN_PORT162_SCIFB_RXD, GPIO_FN_PORT162_SCIFA5_RXD,
+ GPIO_FN_PORT163_SCIFB_RTS_, GPIO_FN_PORT163_SCIFA5_RTS_, \
+ GPIO_FN_TPU3TO0,
+ GPIO_FN_LCDD0,
+ GPIO_FN_LCDD1, GPIO_FN_PORT193_SCIFA5_CTS_, GPIO_FN_BBIF2_TSYNC1,
+ GPIO_FN_LCDD2, GPIO_FN_PORT194_SCIFA5_RTS_, GPIO_FN_BBIF2_TSCK1,
+ GPIO_FN_LCDD3, GPIO_FN_PORT195_SCIFA5_RXD, GPIO_FN_BBIF2_TXD1,
+ GPIO_FN_LCDD4, GPIO_FN_PORT196_SCIFA5_TXD,
+ GPIO_FN_LCDD5, GPIO_FN_PORT197_SCIFA5_SCK, GPIO_FN_MFG2_OUT2, \
+ GPIO_FN_TPU2TO1,
+ GPIO_FN_LCDD6,
+ GPIO_FN_LCDD7, GPIO_FN_TPU4TO1, GPIO_FN_MFG4_OUT2,
+ GPIO_FN_LCDD8, GPIO_FN_D16,
+ GPIO_FN_LCDD9, GPIO_FN_D17,
+ GPIO_FN_LCDD10, GPIO_FN_D18,
+ GPIO_FN_LCDD11, GPIO_FN_D19,
+ GPIO_FN_LCDD12, GPIO_FN_D20,
+ GPIO_FN_LCDD13, GPIO_FN_D21,
+ GPIO_FN_LCDD14, GPIO_FN_D22,
+ GPIO_FN_LCDD15, GPIO_FN_PORT207_MSIOF0L_SS1, GPIO_FN_D23,
+ GPIO_FN_LCDD16, GPIO_FN_PORT208_MSIOF0L_SS2, GPIO_FN_D24,
+ GPIO_FN_LCDD17, GPIO_FN_D25,
+ GPIO_FN_LCDD18, GPIO_FN_DREQ2, GPIO_FN_PORT210_MSIOF0L_SS1, GPIO_FN_D26,
+ GPIO_FN_LCDD19, GPIO_FN_PORT211_MSIOF0L_SS2, GPIO_FN_D27,
+ GPIO_FN_LCDD20, GPIO_FN_TS_SPSYNC1, GPIO_FN_MSIOF0L_MCK0, GPIO_FN_D28,
+ GPIO_FN_LCDD21, GPIO_FN_TS_SDAT1, GPIO_FN_MSIOF0L_MCK1, GPIO_FN_D29,
+ GPIO_FN_LCDD22, GPIO_FN_TS_SDEN1, GPIO_FN_MSIOF0L_RSCK, GPIO_FN_D30,
+ GPIO_FN_LCDD23, GPIO_FN_TS_SCK1, GPIO_FN_MSIOF0L_RSYNC, GPIO_FN_D31,
+ GPIO_FN_LCDDCK, GPIO_FN_LCDWR_,
+ GPIO_FN_LCDRD_, GPIO_FN_DACK2, GPIO_FN_PORT217_LCD2RS, \
+ GPIO_FN_MSIOF0L_TSYNC, GPIO_FN_VIO2_FIELD3, GPIO_FN_PORT217_LCD2DISP,
+ GPIO_FN_LCDHSYN, GPIO_FN_LCDCS_, GPIO_FN_LCDCS2_, GPIO_FN_DACK3, \
+ GPIO_FN_PORT218_VIO_CKOR,
+ GPIO_FN_LCDDISP, GPIO_FN_LCDRS, GPIO_FN_PORT219_LCD2WR_, \
+ GPIO_FN_DREQ3, GPIO_FN_MSIOF0L_TSCK, GPIO_FN_VIO2_CLK3, \
+ GPIO_FN_LCD2DCK_2,
+ GPIO_FN_LCDVSYN, GPIO_FN_LCDVSYN2,
+ GPIO_FN_LCDLCLK, GPIO_FN_DREQ1, GPIO_FN_PORT221_LCD2CS_, \
+ GPIO_FN_PWEN, GPIO_FN_MSIOF0L_RXD, GPIO_FN_VIO2_HD3, \
+ GPIO_FN_PORT221_LCD2HSYN,
+ GPIO_FN_LCDDON, GPIO_FN_LCDDON2, GPIO_FN_DACK1, GPIO_FN_OVCN, \
+ GPIO_FN_MSIOF0L_TXD, GPIO_FN_VIO2_VD3, GPIO_FN_PORT222_LCD2VSYN,
+
+ GPIO_FN_SCIFA1_TXD, GPIO_FN_OVCN2,
+ GPIO_FN_EXTLP, GPIO_FN_SCIFA1_SCK, GPIO_FN_PORT226_VIO_CKO2,
+ GPIO_FN_SCIFA1_RTS_, GPIO_FN_IDIN,
+ GPIO_FN_SCIFA1_RXD,
+ GPIO_FN_SCIFA1_CTS_, GPIO_FN_MFG1_IN1,
+ GPIO_FN_MSIOF1_TXD, GPIO_FN_SCIFA2_TXD2,
+ GPIO_FN_MSIOF1_TSYNC, GPIO_FN_SCIFA2_CTS2_,
+ GPIO_FN_MSIOF1_TSCK, GPIO_FN_SCIFA2_SCK2,
+ GPIO_FN_MSIOF1_RXD, GPIO_FN_SCIFA2_RXD2,
+ GPIO_FN_MSIOF1_RSCK, GPIO_FN_SCIFA2_RTS2_, GPIO_FN_VIO2_CLK2, \
+ GPIO_FN_LCD2D20,
+ GPIO_FN_MSIOF1_RSYNC, GPIO_FN_MFG1_IN2, GPIO_FN_VIO2_VD2, \
+ GPIO_FN_LCD2D21,
+ GPIO_FN_MSIOF1_MCK0, GPIO_FN_PORT236_I2C_SDA2,
+ GPIO_FN_MSIOF1_MCK1, GPIO_FN_PORT237_I2C_SCL2,
+ GPIO_FN_MSIOF1_SS1, GPIO_FN_VIO2_FIELD2, GPIO_FN_LCD2D22,
+ GPIO_FN_MSIOF1_SS2, GPIO_FN_VIO2_HD2, GPIO_FN_LCD2D23,
+ GPIO_FN_SCIFA6_TXD,
+ GPIO_FN_PORT241_IRDA_OUT, GPIO_FN_PORT241_IROUT, GPIO_FN_MFG4_OUT1, \
+ GPIO_FN_TPU4TO0,
+ GPIO_FN_PORT242_IRDA_IN, GPIO_FN_MFG4_IN2,
+ GPIO_FN_PORT243_IRDA_FIRSEL, GPIO_FN_PORT243_VIO_CKO2,
+ GPIO_FN_PORT244_SCIFA5_CTS_, GPIO_FN_MFG2_IN1, \
+ GPIO_FN_PORT244_SCIFB_CTS_, GPIO_FN_MSIOF2R_RXD,
+ GPIO_FN_PORT245_SCIFA5_RTS_, GPIO_FN_MFG2_IN2, \
+ GPIO_FN_PORT245_SCIFB_RTS_, GPIO_FN_MSIOF2R_TXD,
+ GPIO_FN_PORT246_SCIFA5_RXD, GPIO_FN_MFG1_OUT1, \
+ GPIO_FN_PORT246_SCIFB_RXD, GPIO_FN_TPU1TO0,
+ GPIO_FN_PORT247_SCIFA5_TXD, GPIO_FN_MFG3_OUT2, \
+ GPIO_FN_PORT247_SCIFB_TXD, GPIO_FN_TPU3TO1,
+ GPIO_FN_PORT248_SCIFA5_SCK, GPIO_FN_MFG2_OUT1, \
+ GPIO_FN_PORT248_SCIFB_SCK, GPIO_FN_TPU2TO0, \
+ GPIO_FN_PORT248_I2C_SCL3, GPIO_FN_MSIOF2R_TSCK,
+ GPIO_FN_PORT249_IROUT, GPIO_FN_MFG4_IN1, \
+ GPIO_FN_PORT249_I2C_SDA3, GPIO_FN_MSIOF2R_TSYNC,
+ GPIO_FN_SDHICLK0,
+ GPIO_FN_SDHICD0,
+ GPIO_FN_SDHID0_0,
+ GPIO_FN_SDHID0_1,
+ GPIO_FN_SDHID0_2,
+ GPIO_FN_SDHID0_3,
+ GPIO_FN_SDHICMD0,
+ GPIO_FN_SDHIWP0,
+ GPIO_FN_SDHICLK1,
+ GPIO_FN_SDHID1_0, GPIO_FN_TS_SPSYNC2,
+ GPIO_FN_SDHID1_1, GPIO_FN_TS_SDAT2,
+ GPIO_FN_SDHID1_2, GPIO_FN_TS_SDEN2,
+ GPIO_FN_SDHID1_3, GPIO_FN_TS_SCK2,
+ GPIO_FN_SDHICMD1,
+ GPIO_FN_SDHICLK2,
+ GPIO_FN_SDHID2_0, GPIO_FN_TS_SPSYNC4,
+ GPIO_FN_SDHID2_1, GPIO_FN_TS_SDAT4,
+ GPIO_FN_SDHID2_2, GPIO_FN_TS_SDEN4,
+ GPIO_FN_SDHID2_3, GPIO_FN_TS_SCK4,
+ GPIO_FN_SDHICMD2,
+ GPIO_FN_MMCCLK0,
+ GPIO_FN_MMCD0_0,
+ GPIO_FN_MMCD0_1,
+ GPIO_FN_MMCD0_2,
+ GPIO_FN_MMCD0_3,
+ GPIO_FN_MMCD0_4, GPIO_FN_TS_SPSYNC5,
+ GPIO_FN_MMCD0_5, GPIO_FN_TS_SDAT5,
+ GPIO_FN_MMCD0_6, GPIO_FN_TS_SDEN5,
+ GPIO_FN_MMCD0_7, GPIO_FN_TS_SCK5,
+ GPIO_FN_MMCCMD0,
+ GPIO_FN_RESETOUTS_, GPIO_FN_EXTAL2OUT,
+ GPIO_FN_MCP_WAIT__MCP_FRB,
+ GPIO_FN_MCP_CKO, GPIO_FN_MMCCLK1,
+ GPIO_FN_MCP_D15_MCP_NAF15,
+ GPIO_FN_MCP_D14_MCP_NAF14,
+ GPIO_FN_MCP_D13_MCP_NAF13,
+ GPIO_FN_MCP_D12_MCP_NAF12,
+ GPIO_FN_MCP_D11_MCP_NAF11,
+ GPIO_FN_MCP_D10_MCP_NAF10,
+ GPIO_FN_MCP_D9_MCP_NAF9,
+ GPIO_FN_MCP_D8_MCP_NAF8, GPIO_FN_MMCCMD1,
+ GPIO_FN_MCP_D7_MCP_NAF7, GPIO_FN_MMCD1_7,
+
+ GPIO_FN_MCP_D6_MCP_NAF6, GPIO_FN_MMCD1_6,
+ GPIO_FN_MCP_D5_MCP_NAF5, GPIO_FN_MMCD1_5,
+ GPIO_FN_MCP_D4_MCP_NAF4, GPIO_FN_MMCD1_4,
+ GPIO_FN_MCP_D3_MCP_NAF3, GPIO_FN_MMCD1_3,
+ GPIO_FN_MCP_D2_MCP_NAF2, GPIO_FN_MMCD1_2,
+ GPIO_FN_MCP_D1_MCP_NAF1, GPIO_FN_MMCD1_1,
+ GPIO_FN_MCP_D0_MCP_NAF0, GPIO_FN_MMCD1_0,
+ GPIO_FN_MCP_NBRSTOUT_,
+ GPIO_FN_MCP_WE0__MCP_FWE, GPIO_FN_MCP_RDWR_MCP_FWE,
+
+ /* MSEL2 special case */
+ GPIO_FN_TSIF2_TS_XX1,
+ GPIO_FN_TSIF2_TS_XX2,
+ GPIO_FN_TSIF2_TS_XX3,
+ GPIO_FN_TSIF2_TS_XX4,
+ GPIO_FN_TSIF2_TS_XX5,
+ GPIO_FN_TSIF1_TS_XX1,
+ GPIO_FN_TSIF1_TS_XX2,
+ GPIO_FN_TSIF1_TS_XX3,
+ GPIO_FN_TSIF1_TS_XX4,
+ GPIO_FN_TSIF1_TS_XX5,
+ GPIO_FN_TSIF0_TS_XX1,
+ GPIO_FN_TSIF0_TS_XX2,
+ GPIO_FN_TSIF0_TS_XX3,
+ GPIO_FN_TSIF0_TS_XX4,
+ GPIO_FN_TSIF0_TS_XX5,
+ GPIO_FN_MST1_TS_XX1,
+ GPIO_FN_MST1_TS_XX2,
+ GPIO_FN_MST1_TS_XX3,
+ GPIO_FN_MST1_TS_XX4,
+ GPIO_FN_MST1_TS_XX5,
+ GPIO_FN_MST0_TS_XX1,
+ GPIO_FN_MST0_TS_XX2,
+ GPIO_FN_MST0_TS_XX3,
+ GPIO_FN_MST0_TS_XX4,
+ GPIO_FN_MST0_TS_XX5,
+
+ /* MSEL3 special cases */
+ GPIO_FN_SDHI0_VCCQ_MC0_ON,
+ GPIO_FN_SDHI0_VCCQ_MC0_OFF,
+ GPIO_FN_DEBUG_MON_VIO,
+ GPIO_FN_DEBUG_MON_LCDD,
+ GPIO_FN_LCDC_LCDC0,
+ GPIO_FN_LCDC_LCDC1,
+
+ /* MSEL4 special cases */
+ GPIO_FN_IRQ9_MEM_INT,
+ GPIO_FN_IRQ9_MCP_INT,
+ GPIO_FN_A11,
+ GPIO_FN_KEYOUT8,
+ GPIO_FN_TPU4TO3,
+ GPIO_FN_RESETA_N_PU_ON,
+ GPIO_FN_RESETA_N_PU_OFF,
+ GPIO_FN_EDBGREQ_PD,
+ GPIO_FN_EDBGREQ_PU,
+
+ /* Functions with pull-ups */
+ GPIO_FN_KEYIN0_PU,
+ GPIO_FN_KEYIN1_PU,
+ GPIO_FN_KEYIN2_PU,
+ GPIO_FN_KEYIN3_PU,
+ GPIO_FN_KEYIN4_PU,
+ GPIO_FN_KEYIN5_PU,
+ GPIO_FN_KEYIN6_PU,
+ GPIO_FN_KEYIN7_PU,
+ GPIO_FN_SDHICD0_PU,
+ GPIO_FN_SDHID0_0_PU,
+ GPIO_FN_SDHID0_1_PU,
+ GPIO_FN_SDHID0_2_PU,
+ GPIO_FN_SDHID0_3_PU,
+ GPIO_FN_SDHICMD0_PU,
+ GPIO_FN_SDHIWP0_PU,
+ GPIO_FN_SDHID1_0_PU,
+ GPIO_FN_SDHID1_1_PU,
+ GPIO_FN_SDHID1_2_PU,
+ GPIO_FN_SDHID1_3_PU,
+ GPIO_FN_SDHICMD1_PU,
+ GPIO_FN_SDHID2_0_PU,
+ GPIO_FN_SDHID2_1_PU,
+ GPIO_FN_SDHID2_2_PU,
+ GPIO_FN_SDHID2_3_PU,
+ GPIO_FN_SDHICMD2_PU,
+ GPIO_FN_MMCCMD0_PU,
+ GPIO_FN_MMCCMD1_PU,
+ GPIO_FN_MMCD0_0_PU,
+ GPIO_FN_MMCD0_1_PU,
+ GPIO_FN_MMCD0_2_PU,
+ GPIO_FN_MMCD0_3_PU,
+ GPIO_FN_MMCD0_4_PU,
+ GPIO_FN_MMCD0_5_PU,
+ GPIO_FN_MMCD0_6_PU,
+ GPIO_FN_MMCD0_7_PU,
+ GPIO_FN_FSIACK_PU,
+ GPIO_FN_FSIAILR_PU,
+ GPIO_FN_FSIAIBT_PU,
+ GPIO_FN_FSIAISLD_PU,
+
+ /* end of GPIO */
+ GPIO_NR,
+};
+
+/* DMA slave IDs */
+enum {
+ SHDMA_SLAVE_INVALID,
+ SHDMA_SLAVE_SCIF0_TX,
+ SHDMA_SLAVE_SCIF0_RX,
+ SHDMA_SLAVE_SCIF1_TX,
+ SHDMA_SLAVE_SCIF1_RX,
+ SHDMA_SLAVE_SCIF2_TX,
+ SHDMA_SLAVE_SCIF2_RX,
+ SHDMA_SLAVE_SCIF3_TX,
+ SHDMA_SLAVE_SCIF3_RX,
+ SHDMA_SLAVE_SCIF4_TX,
+ SHDMA_SLAVE_SCIF4_RX,
+ SHDMA_SLAVE_SCIF5_TX,
+ SHDMA_SLAVE_SCIF5_RX,
+ SHDMA_SLAVE_SCIF6_TX,
+ SHDMA_SLAVE_SCIF6_RX,
+ SHDMA_SLAVE_SCIF7_TX,
+ SHDMA_SLAVE_SCIF7_RX,
+ SHDMA_SLAVE_SCIF8_TX,
+ SHDMA_SLAVE_SCIF8_RX,
+ SHDMA_SLAVE_SDHI0_TX,
+ SHDMA_SLAVE_SDHI0_RX,
+ SHDMA_SLAVE_SDHI1_TX,
+ SHDMA_SLAVE_SDHI1_RX,
+ SHDMA_SLAVE_SDHI2_TX,
+ SHDMA_SLAVE_SDHI2_RX,
+ SHDMA_SLAVE_MMCIF_TX,
+ SHDMA_SLAVE_MMCIF_RX,
+};
+
+/*
+ * SH73A0 IRQ LOCATION TABLE
+ *
+ * 416 -----------------------------------------
+ * IRQ0-IRQ15
+ * 431 -----------------------------------------
+ * ...
+ * 448 -----------------------------------------
+ * sh73a0-intcs
+ * sh73a0-intca-irq-pins
+ * 680 -----------------------------------------
+ * ...
+ * 700 -----------------------------------------
+ * sh73a0-pint0
+ * 731 -----------------------------------------
+ * 732 -----------------------------------------
+ * sh73a0-pint1
+ * 739 -----------------------------------------
+ * ...
+ * 800 -----------------------------------------
+ * IRQ16-IRQ31
+ * 815 -----------------------------------------
+ * ...
+ * 928 -----------------------------------------
+ * sh73a0-intca-irq-pins
+ * 943 -----------------------------------------
+ */
+
+/* PINT interrupts are located at Linux IRQ 700 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
+
+#endif /* __ASM_SH73A0_H__ */
--- /dev/null
+#ifndef __ASM_ARCH_RMOBILE_SH73A0_H
+#define __ASM_ARCH_RMOBILE_SH73A0_H
+
+/* Global Timer */
+#define GLOBAL_TIMER_BASE_ADDR (0xF0000200)
+#define MERAM_BASE (0xE5580000)
+
+/* GIC */
+#define GIC_BASE (0xF0000100)
+#define ICCICR GIC_BASE
+
+/* Secure control register */
+#define LIFEC_SEC_SRC (0xE6110008)
+
+/* RWDT */
+#define RWDT_BASE (0xE6020000)
+
+/* HPB Semaphore Control Registers */
+#define HPB_BASE (0xE6001010)
+
+/* Bus Semaphore Control Registers */
+#define HPBSCR_BASE (0xE6001600)
+
+/* SBSC1 */
+#define SBSC1_BASE (0xFE400000)
+#define SDMRA1A (SBSC1_BASE + 0x100000)
+#define SDMRA2A (SBSC1_BASE + 0x1C0000)
+#define SDMRA3A (SBSC1_BASE + 0x104000)
+
+/* SBSC2 */
+#define SBSC2_BASE (0xFB400000)
+#define SDMRA1B (SBSC2_BASE + 0x100000)
+#define SDMRA2B (SBSC2_BASE + 0x1C0000)
+#define SDMRA3B (SBSC2_BASE + 0x104000)
+
+/* CPG */
+#define CPG_BASE (0xE6150000)
+#define CPG_SRCR_BASE (CPG_BASE + 0x80A0)
+#define WUPCR (CPG_BASE + 0x1010)
+#define SRESCR (CPG_BASE + 0x1018)
+#define PCLKCR (CPG_BASE + 0x1020)
+
+/* SYSC */
+#define SYSC_BASE (0xE6180000)
+#define RESCNT2 (SYSC_BASE + 0x8020)
+
+/* BSC */
+#define BSC_BASE (0xFEC10000)
+
+/* SCIF */
+#define SCIF0_BASE (0xE6C40000)
+#define SCIF1_BASE (0xE6C50000)
+#define SCIF2_BASE (0xE6C60000)
+#define SCIF3_BASE (0xE6C70000)
+#define SCIF4_BASE (0xE6C80000)
+#define SCIF5_BASE (0xE6CB0000)
+#define SCIF6_BASE (0xE6CC0000)
+#define SCIF7_BASE (0xE6CD0000)
+
+#ifndef __ASSEMBLY__
+#include <asm/types.h>
+
+/* RWDT */
+struct sh73a0_rwdt {
+ u16 rwtcnt0; /* 0x00 */
+ u16 dummy0; /* 0x02 */
+ u16 rwtcsra0; /* 0x04 */
+ u16 dummy1; /* 0x06 */
+ u16 rwtcsrb0; /* 0x08 */
+};
+
+/* HPB Semaphore Control Registers */
+struct sh73a0_hpb {
+ u32 hpbctrl0;
+ u32 hpbctrl1;
+ u32 hpbctrl2;
+ u32 cccr;
+ u32 dummy0; /* 0x20 */
+ u32 hpbctrl4;
+ u32 hpbctrl5;
+ u32 dummy1; /* 0x2C */
+ u32 hpbctrl6;
+};
+
+/* Bus Semaphore Control Registers */
+struct sh73a0_hpb_bscr {
+ u32 mpsrc; /* 0x00 */
+ u32 mpacctl; /* 0x04 */
+ u32 dummy0[6];
+ u32 smgpiosrc; /* 0x20 */
+ u32 smgpioerr;
+ u32 smgpiotime;
+ u32 smgpiocnt;
+ u32 dummy1[4]; /* 0x30 .. 0x3C */
+ u32 smcmt2src;
+ u32 smcmt2err;
+ u32 smcmt2time;
+ u32 smcmt2cnt;
+ u32 smcpgsrc;
+ u32 smcpgerr;
+ u32 smcpgtime;
+ u32 smcpgcnt;
+ u32 dummy2[4]; /* 0x60 - 0x6C */
+ u32 smsyscsrc;
+ u32 smsyscerr;
+ u32 smsysctime;
+ u32 smsysccnt;
+};
+
+/* SBSC */
+struct sh73a0_sbsc {
+ u32 dummy0[2]; /* 0x00, 0x04 */
+ u32 sdcr0;
+ u32 sdcr1;
+ u32 sdpcr;
+ u32 dummy1; /* 0x14 */
+ u32 sdcr0s;
+ u32 sdcr1s;
+ u32 rtcsr;
+ u32 dummy2; /* 0x24 */
+ u32 rtcor;
+ u32 rtcorh;
+ u32 rtcors;
+ u32 rtcorsh;
+ u32 dummy3[2]; /* 0x38, 0x3C */
+ u32 sdwcrc0;
+ u32 sdwcrc1;
+ u32 sdwcr00;
+ u32 sdwcr01;
+ u32 sdwcr10;
+ u32 sdwcr11;
+ u32 sdpdcr0;
+ u32 dummy4; /* 0x5C */
+ u32 sdwcr2;
+ u32 sdwcrc2;
+ u32 zqccr;
+ u32 dummy5[6]; /* 0x6C .. 0x80 */
+ u32 sdmracr0;
+ u32 dummy6; /* 0x88 */
+ u32 sdmrtmpcr;
+ u32 dummy7; /* 0x90 */
+ u32 sdmrtmpmsk;
+ u32 dummy8; /* 0x98 */
+ u32 sdgencnt;
+ u32 dphycnt0;
+ u32 dphycnt1;
+ u32 dphycnt2;
+ u32 dummy9[2]; /* 0xAC .. 0xB0 */
+ u32 sddrvcr0;
+ u32 dummy10[14]; /* 0xB8 .. 0xEC */
+ u32 dptdivcr0;
+ u32 dptdivcr1;
+ u32 dptdivcr2;
+ u32 dummy11; /* 0xFC */
+ u32 sdptcr0;
+ u32 sdptcr1;
+ u32 sdptcr2;
+ u32 sdptcr3; /* 0x10C */
+ u32 dummy12[145]; /* 0x110 .. 0x350 */
+ u32 dllcnt0; /* 0x354 */
+ u32 sbscmon0;
+};
+
+/* CPG */
+struct sh73a0_sbsc_cpg {
+ u32 frqcra; /* 0x00 */
+ u32 frqcrb;
+ u32 vclkcr1;
+ u32 vclkcr2;
+ u32 zbckcr;
+ u32 flckcr;
+ u32 fsiackcr;
+ u32 vclkcr3;
+ u32 rtstbcr;
+ u32 systbcr;
+ u32 pll1cr;
+ u32 pll2cr;
+ u32 mstpsr0;
+ u32 dummy0; /* 0x34 */
+ u32 mstpsr1;
+ u32 mstpsr5;
+ u32 mstpsr2;
+ u32 dummy1; /* 0x44 */
+ u32 mstpsr3;
+ u32 mstpsr4;
+ u32 dummy2; /* 0x50 */
+ u32 astat;
+ u32 dvfscr0;
+ u32 dvfscr1;
+ u32 dsitckcr;
+ u32 dsi0pckcr;
+ u32 dsi1pckcr;
+ u32 dsi0phycr;
+ u32 dsi1phycr;
+ u32 sd0ckcr;
+ u32 sd1ckcr;
+ u32 sd2ckcr;
+ u32 subckcr;
+ u32 spuackcr;
+ u32 msuckcr;
+ u32 hsickcr;
+ u32 fsibckcr;
+ u32 spuvckcr;
+ u32 mfck1cr;
+ u32 mfck2cr;
+ u32 dummy3[8]; /* 0xA0 .. 0xBC */
+ u32 ckscr;
+ u32 dummy4; /* 0xC4 */
+ u32 pll1stpcr;
+ u32 mpmode;
+ u32 pllecr;
+ u32 dummy5; /* 0xD4 */
+ u32 pll0cr;
+ u32 pll3cr;
+ u32 dummy6; /* 0xE0 */
+ u32 frqcrd;
+ u32 dummyi7; /* 0xE8 */
+ u32 vrefcr;
+ u32 pll0stpcr;
+ u32 dummy8; /* 0xF4 */
+ u32 pll2stpcr;
+ u32 pll3stpcr;
+ u32 dummy9[4]; /* 0x100 .. 0x10c */
+ u32 rmstpcr0;
+ u32 rmstpcr1;
+ u32 rmstpcr2;
+ u32 rmstpcr3;
+ u32 rmstpcr4;
+ u32 rmstpcr5;
+ u32 dummy10[2]; /* 0x128 .. 0x12c */
+ u32 smstpcr0;
+ u32 smstpcr1;
+ u32 smstpcr2;
+ u32 smstpcr3;
+ u32 smstpcr4;
+ u32 smstpcr5;
+ u32 dummy11[2]; /* 0x148 .. 0x14c */
+ u32 cpgxxcs4;
+ u32 dummy12[7]; /* 0x154 .. 0x16c */
+ u32 dvfscr2;
+ u32 dvfscr3;
+ u32 dvfscr4;
+ u32 dvfscr5; /* 0x17C */
+};
+
+/* CPG SRCR part OK */
+struct sh73a0_sbsc_cpg_srcr {
+ u32 srcr0;
+ u32 dummy0; /* 0xA4 */
+ u32 srcr1;
+ u32 dummy1; /* 0xAC */
+ u32 srcr2;
+ u32 dummy2; /* 0xB4 */
+ u32 srcr3;
+ u32 srcr4;
+ u32 dummy3; /* 0xC0 */
+ u32 srcr5;
+};
+
+/* BSC */
+struct sh73a0_bsc {
+ u32 cmncr;
+ u32 cs0bcr;
+ u32 cs2bcr;
+ u32 dummy0; /* 0x0C */
+ u32 cs4bcr;
+ u32 cs5abcr;
+ u32 cs5bbcr;
+ u32 cs6abcr;
+ u32 cs6bbcr;
+ u32 cs0wcr;
+ u32 cs2wcr;
+ u32 dummy1; /* 0x2C */
+ u32 cs4wcr;
+ u32 cs5awcr;
+ u32 cs5bwcr;
+ u32 cs6awcr;
+ u32 cs6bwcr;
+ u32 rbwtcnt;
+ u32 busycr;
+ u32 dummy2; /* 0x5c */
+ u32 cs7abcr;
+ u32 cs7awcr;
+ u32 dummy3[2]; /* 0x68, 0x6C */
+ u32 bromtimcr;
+};
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ARCH_RMOBILE_SH73A0_H */
--- /dev/null
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _SYS_PROTO_H_
+#define _SYS_PROTO_H_
+
+struct rmobile_sysinfo {
+ char *board_string;
+};
+extern const struct rmobile_sysinfo sysinfo;
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2012.
+ *
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _S3C24X0_GPIO_H_
+#define _S3C24X0_GPIO_H_
+
+enum s3c2440_gpio {
+ GPA0,
+ GPA1,
+ GPA2,
+ GPA3,
+ GPA4,
+ GPA5,
+ GPA6,
+ GPA7,
+ GPA8,
+ GPA9,
+ GPA10,
+ GPA11,
+ GPA12,
+ GPA13,
+ GPA14,
+ GPA15,
+ GPA16,
+ GPA17,
+ GPA18,
+ GPA19,
+ GPA20,
+ GPA21,
+ GPA22,
+ GPA23,
+ GPA24,
+
+ GPB0 = 32,
+ GPB1,
+ GPB2,
+ GPB3,
+ GPB4,
+ GPB5,
+ GPB6,
+ GPB7,
+ GPB8,
+ GPB9,
+ GPB10,
+
+ GPC0 = 64,
+ GPC1,
+ GPC2,
+ GPC3,
+ GPC4,
+ GPC5,
+ GPC6,
+ GPC7,
+ GPC8,
+ GPC9,
+ GPC10,
+ GPC11,
+ GPC12,
+ GPC13,
+ GPC14,
+ GPC15,
+
+ GPD0 = 96,
+ GPD1,
+ GPD2,
+ GPD3,
+ GPD4,
+ GPD5,
+ GPD6,
+ GPD7,
+ GPD8,
+ GPD9,
+ GPD10,
+ GPD11,
+ GPD12,
+ GPD13,
+ GPD14,
+ GPD15,
+
+ GPE0 = 128,
+ GPE1,
+ GPE2,
+ GPE3,
+ GPE4,
+ GPE5,
+ GPE6,
+ GPE7,
+ GPE8,
+ GPE9,
+ GPE10,
+ GPE11,
+ GPE12,
+ GPE13,
+ GPE14,
+ GPE15,
+
+ GPF0 = 160,
+ GPF1,
+ GPF2,
+ GPF3,
+ GPF4,
+ GPF5,
+ GPF6,
+ GPF7,
+
+ GPG0 = 192,
+ GPG1,
+ GPG2,
+ GPG3,
+ GPG4,
+ GPG5,
+ GPG6,
+ GPG7,
+ GPG8,
+ GPG9,
+ GPG10,
+ GPG11,
+ GPG12,
+ GPG13,
+ GPG14,
+ GPG15,
+
+ GPH0 = 224,
+ GPH1,
+ GPH2,
+ GPH3,
+ GPH4,
+ GPH5,
+ GPH6,
+ GPH7,
+ GPH8,
+ GPH9,
+ GPH10,
+
+ GPJ0 = 256,
+ GPJ1,
+ GPJ2,
+ GPJ3,
+ GPJ4,
+ GPJ5,
+ GPJ6,
+ GPJ7,
+ GPJ8,
+ GPJ9,
+ GPJ10,
+ GPJ11,
+ GPJ12,
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2012
+ *
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _S3C24X0_IOMUX_H_
+#define _S3C24X0_IOMUX_H_
+
+enum s3c2440_iomux_func {
+ /* PORT A */
+ IOMUXA_ADDR0 = 1,
+ IOMUXA_ADDR16 = (1 << 1),
+ IOMUXA_ADDR17 = (1 << 2),
+ IOMUXA_ADDR18 = (1 << 3),
+ IOMUXA_ADDR19 = (1 << 4),
+ IOMUXA_ADDR20 = (1 << 5),
+ IOMUXA_ADDR21 = (1 << 6),
+ IOMUXA_ADDR22 = (1 << 7),
+ IOMUXA_ADDR23 = (1 << 8),
+ IOMUXA_ADDR24 = (1 << 9),
+ IOMUXA_ADDR25 = (1 << 10),
+ IOMUXA_ADDR26 = (1 << 11),
+ IOMUXA_nGCS1 = (1 << 12),
+ IOMUXA_nGCS2 = (1 << 13),
+ IOMUXA_nGCS3 = (1 << 14),
+ IOMUXA_nGCS4 = (1 << 15),
+ IOMUXA_nGCS5 = (1 << 16),
+ IOMUXA_CLE = (1 << 17),
+ IOMUXA_ALE = (1 << 18),
+ IOMUXA_nFWE = (1 << 19),
+ IOMUXA_nFRE = (1 << 20),
+ IOMUXA_nRSTOUT = (1 << 21),
+ IOMUXA_nFCE = (1 << 22),
+
+ /* PORT B */
+ IOMUXB_nXDREQ0 = (2 << 20),
+ IOMUXB_nXDACK0 = (2 << 18),
+ IOMUXB_nXDREQ1 = (2 << 16),
+ IOMUXB_nXDACK1 = (2 << 14),
+ IOMUXB_nXBREQ = (2 << 12),
+ IOMUXB_nXBACK = (2 << 10),
+ IOMUXB_TCLK0 = (2 << 8),
+ IOMUXB_TOUT3 = (2 << 6),
+ IOMUXB_TOUT2 = (2 << 4),
+ IOMUXB_TOUT1 = (2 << 2),
+ IOMUXB_TOUT0 = 2,
+
+ /* PORT C */
+ IOMUXC_VS7 = (2 << 30),
+ IOMUXC_VS6 = (2 << 28),
+ IOMUXC_VS5 = (2 << 26),
+ IOMUXC_VS4 = (2 << 24),
+ IOMUXC_VS3 = (2 << 22),
+ IOMUXC_VS2 = (2 << 20),
+ IOMUXC_VS1 = (2 << 18),
+ IOMUXC_VS0 = (2 << 16),
+ IOMUXC_LCD_LPCREVB = (2 << 14),
+ IOMUXC_LCD_LPCREV = (2 << 12),
+ IOMUXC_LCD_LPCOE = (2 << 10),
+ IOMUXC_VM = (2 << 8),
+ IOMUXC_VFRAME = (2 << 6),
+ IOMUXC_VLINE = (2 << 4),
+ IOMUXC_VCLK = (2 << 2),
+ IOMUXC_LEND = 2,
+ IOMUXC_I2SSDI = (3 << 8),
+
+ /* PORT D */
+ IOMUXD_VS23 = (2 << 30),
+ IOMUXD_VS22 = (2 << 28),
+ IOMUXD_VS21 = (2 << 26),
+ IOMUXD_VS20 = (2 << 24),
+ IOMUXD_VS19 = (2 << 22),
+ IOMUXD_VS18 = (2 << 20),
+ IOMUXD_VS17 = (2 << 18),
+ IOMUXD_VS16 = (2 << 16),
+ IOMUXD_VS15 = (2 << 14),
+ IOMUXD_VS14 = (2 << 12),
+ IOMUXD_VS13 = (2 << 10),
+ IOMUXD_VS12 = (2 << 8),
+ IOMUXD_VS11 = (2 << 6),
+ IOMUXD_VS10 = (2 << 4),
+ IOMUXD_VS9 = (2 << 2),
+ IOMUXD_VS8 = 2,
+ IOMUXD_nSS0 = (3 << 30),
+ IOMUXD_nSS1 = (3 << 28),
+ IOMUXD_SPICLK1 = (3 << 20),
+ IOMUXD_SPIMOSI1 = (3 << 18),
+ IOMUXD_SPIMISO1 = (3 << 16),
+
+ /* PORT E */
+ IOMUXE_IICSDA = (2 << 30),
+ IOMUXE_IICSCL = (2 << 28),
+ IOMUXE_SPICLK0 = (2 << 26),
+ IOMUXE_SPIMOSI0 = (2 << 24),
+ IOMUXE_SPIMISO0 = (2 << 22),
+ IOMUXE_SDDAT3 = (2 << 20),
+ IOMUXE_SDDAT2 = (2 << 18),
+ IOMUXE_SDDAT1 = (2 << 16),
+ IOMUXE_SDDAT0 = (2 << 14),
+ IOMUXE_SDCMD = (2 << 12),
+ IOMUXE_SDCLK = (2 << 10),
+ IOMUXE_I2SDO = (2 << 8),
+ IOMUXE_I2SDI = (2 << 6),
+ IOMUXE_CDCLK = (2 << 4),
+ IOMUXE_I2SSCLK = (2 << 2),
+ IOMUXE_I2SLRCK = 2,
+ IOMUXE_AC_SDATA_OUT = (3 << 8),
+ IOMUXE_AC_SDATA_IN = (3 << 6),
+ IOMUXE_AC_nRESET = (3 << 4),
+ IOMUXE_AC_BIT_CLK = (3 << 2),
+ IOMUXE_AC_SYNC = 3,
+
+ /* PORT F */
+ IOMUXF_EINT7 = (2 << 14),
+ IOMUXF_EINT6 = (2 << 12),
+ IOMUXF_EINT5 = (2 << 10),
+ IOMUXF_EINT4 = (2 << 8),
+ IOMUXF_EINT3 = (2 << 6),
+ IOMUXF_EINT2 = (2 << 4),
+ IOMUXF_EINT1 = (2 << 2),
+ IOMUXF_EINT0 = 2,
+
+ /* PORT G */
+ IOMUXG_EINT23 = (2 << 30),
+ IOMUXG_EINT22 = (2 << 28),
+ IOMUXG_EINT21 = (2 << 26),
+ IOMUXG_EINT20 = (2 << 24),
+ IOMUXG_EINT19 = (2 << 22),
+ IOMUXG_EINT18 = (2 << 20),
+ IOMUXG_EINT17 = (2 << 18),
+ IOMUXG_EINT16 = (2 << 16),
+ IOMUXG_EINT15 = (2 << 14),
+ IOMUXG_EINT14 = (2 << 12),
+ IOMUXG_EINT13 = (2 << 10),
+ IOMUXG_EINT12 = (2 << 8),
+ IOMUXG_EINT11 = (2 << 6),
+ IOMUXG_EINT10 = (2 << 4),
+ IOMUXG_EINT9 = (2 << 2),
+ IOMUXG_EINT8 = 2,
+ IOMUXG_TCLK1 = (3 << 22),
+ IOMUXG_nCTS1 = (3 << 20),
+ IOMUXG_nRTS1 = (3 << 18),
+ IOMUXG_SPICLK1 = (3 << 14),
+ IOMUXG_SPIMOSI1 = (3 << 12),
+ IOMUXG_SPIMISO1 = (3 << 10),
+ IOMUXG_LCD_PWRDN = (3 << 8),
+ IOMUXG_nSS1 = (3 << 6),
+ IOMUXG_nSS0 = (3 << 4),
+
+ /* PORT H */
+ IOMUXH_CLKOUT1 = (2 << 20),
+ IOMUXH_CLKOUT0 = (2 << 18),
+ IOMUXH_UEXTCLK = (2 << 16),
+ IOMUXH_RXD2 = (2 << 14),
+ IOMUXH_TXD2 = (2 << 12),
+ IOMUXH_RXD1 = (2 << 10),
+ IOMUXH_TXD1 = (2 << 8),
+ IOMUXH_RXD0 = (2 << 6),
+ IOMUXH_TXD0 = (2 << 4),
+ IOMUXH_nRTS0 = (2 << 2),
+ IOMUXH_nCTS0 = 2,
+ IOMUXH_nCTS1 = (3 << 14),
+ IOMUXH_nRTS1 = (3 << 12),
+
+ /* PORT J */
+ IOMUXJ_CAMRESET = (2 << 24),
+ IOMUXJ_CAMCLKOUT = (2 << 22),
+ IOMUXJ_CAMHREF = (2 << 20),
+ IOMUXJ_CAMVSYNC = (2 << 18),
+ IOMUXJ_CAMPCLK = (2 << 16),
+ IOMUXJ_CAMDATA7 = (2 << 14),
+ IOMUXJ_CAMDATA6 = (2 << 12),
+ IOMUXJ_CAMDATA5 = (2 << 10),
+ IOMUXJ_CAMDATA4 = (2 << 8),
+ IOMUXJ_CAMDATA3 = (2 << 6),
+ IOMUXJ_CAMDATA2 = (2 << 4),
+ IOMUXJ_CAMDATA1 = (2 << 2),
+ IOMUXJ_CAMDATA0 = 2
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _RESET_MANAGER_H_
+#define _RESET_MANAGER_H_
+
+void reset_cpu(ulong addr);
+void reset_deassert_peripherals_handoff(void);
+
+struct socfpga_reset_manager {
+ u32 padding1;
+ u32 ctrl;
+ u32 padding2;
+ u32 padding3;
+ u32 mpu_mod_reset;
+ u32 per_mod_reset;
+ u32 per2_mod_reset;
+ u32 brg_mod_reset;
+};
+
+#define RSTMGR_CTRL_SWWARMRSTREQ_LSB 1
+
+#endif /* _RESET_MANAGER_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SOCFPGA_BASE_ADDRS_H_
+#define _SOCFPGA_BASE_ADDRS_H_
+
+#define SOCFPGA_L3REGS_ADDRESS 0xff800000
+#define SOCFPGA_UART0_ADDRESS 0xffc02000
+#define SOCFPGA_UART1_ADDRESS 0xffc03000
+#define SOCFPGA_OSC1TIMER0_ADDRESS 0xffd00000
+#define SOCFPGA_RSTMGR_ADDRESS 0xffd05000
+
+#endif /* _SOCFPGA_BASE_ADDRS_H_ */
--- /dev/null
+/*
+ * Copyright (C) 2012 Pavel Machek <pavel@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SOCFPGA_SPL_H_
+#define _SOCFPGA_SPL_H_
+
+/* Symbols from linker script */
+extern char __malloc_start, __malloc_end, __stack_start;
+
+#define BOOT_DEVICE_RAM 1
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _SOCFPGA_TIMER_H_
+#define _SOCFPGA_TIMER_H_
+
+struct socfpga_timer {
+ u32 load_val;
+ u32 curr_val;
+ u32 ctrl;
+ u32 eoi;
+ u32 int_stat;
+};
+
+#endif
#define MACH_TYPE_UBISYS_P9D_EVP 3493
#define MACH_TYPE_ATDGP318 3494
#define MACH_TYPE_OMAP5_SEVM 3777
+#define MACH_TYPE_ARMADILLO_800EVA 3863
+#define MACH_TYPE_KZM9G 4140
#ifdef CONFIG_ARCH_EBSA110
# ifdef machine_arch_type
# define machine_is_omap5_sevm() (0)
#endif
+#ifdef CONFIG_MACH_ARMADILLO800EVA
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_ARMADILLO800EVA
+# endif
+# define machine_is_armadillo800eva() (machine_arch_type == MACH_TYPE_ARMADILLO800EVA)
+#else
+# define machine_is_armadillo800eva() (0)
+#endif
+
+#ifdef CONFIG_MACH_KZM9G
+# ifdef machine_arch_type
+# undef machine_arch_type
+# define machine_arch_type __machine_arch_type
+# else
+# define machine_arch_type MACH_TYPE_KZM9G
+# endif
+# define machine_is_kzm9g() (machine_arch_type == MACH_TYPE_KZM9G)
+#else
+# define machine_is_kzm9g() (0)
+#endif
+
/*
* These have not yet been registered
*/
sp = get_sp();
debug("## Current stack ends at 0x%08lx ", sp);
- /* adjust sp by 1K to be safe */
- sp -= 1024;
+ /* adjust sp by 4K to be safe */
+ sp -= 4096;
lmb_reserve(lmb, sp,
gd->bd->bi_dram[0].start + gd->bd->bi_dram[0].size - sp);
}
fixup_memory_node(*of_flat_tree);
fdt_fixup_ethernet(*of_flat_tree);
fdt_initrd(*of_flat_tree, *initrd_start, *initrd_end, 1);
+#ifdef CONFIG_OF_BOARD_SETUP
+ ft_board_setup(*of_flat_tree, gd->bd);
+#endif
return 0;
}
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
+#define MII_MARVELL_PHY_PAGE 22
+
#define MV88E1116_LED_FCTRL_REG 10
#define MV88E1116_CPRSP_CR3_REG 21
#define MV88E1116_MAC_CTRL_REG 21
-#define MV88E1116_PGADR_REG 22
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
* Enable RGMII delay on Tx and Rx for CPU port
* Ref: sec 4.7.2 of chip datasheet
*/
- miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 2);
+ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2);
miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®);
reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
- miiphy_write(name, phyaddr, MV88E1116_PGADR_REG, 0);
+ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0);
if (miiphy_reset(name, phyaddr) == 0)
printf("88E1116 Initialized on %s\n", name);
}
+
+void mv_phy_88e1318_init(const char *name, u16 phyaddr)
+{
+ u16 reg;
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /*
+ * Set control mode 4 for LED[0].
+ */
+ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 3);
+ miiphy_read(name, phyaddr, 16, ®);
+ reg |= 0xf;
+ miiphy_write(name, phyaddr, 16, reg);
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 2);
+ miiphy_read(name, phyaddr, MV88E1116_MAC_CTRL_REG, ®);
+ reg |= (MV88E1116_RGMII_TXTM_CTRL | MV88E1116_RGMII_RXTM_CTRL);
+ miiphy_write(name, phyaddr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, phyaddr, MII_MARVELL_PHY_PAGE, 0);
+
+ if (miiphy_reset(name, phyaddr) == 0)
+ printf("88E1318 Initialized on %s\n", name);
+}
#endif /* CONFIG_CMD_NET && CONFIG_RESET_PHY_R */
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
void mv_phy_88e1116_init(const char *name, u16 phyaddr);
+void mv_phy_88e1318_init(const char *name, u16 phyaddr);
#endif
#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
int lacie_read_mac_address(uchar *mac);
--- /dev/null
+#
+# Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM spi # Boot from SPI flash
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xFFD100e0 0x1B1B1B9B
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xFFD01400 0x43000618 # DDR Configuration register
+# bit13-0: 0xa00 (2560 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xFFD01404 0x34143000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 8= CL+3, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1)
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xFFD0140C 0x00000A19 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xFFD01410 0x0000DDDD # DDR Address Control
+# bit1-0: 00, Cs0width=x8
+# bit3-2: 10, Cs0size=512Mb
+# bit5-4: 00, Cs2width=nonexistent
+# bit7-6: 00, Cs1size =nonexistent
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xFFD01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xFFD0141C 0x00000632 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xFFD01420 0x00000004 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 1, DDR drive strenght reduced
+# bit2: 1, DDR ODT control lsd enabled
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, enabled
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 1 , D2P Latency enabled
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xFFD01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xFFD0147C 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xFFD01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xFFD01504 0x07FFFFF1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x07, Size (i.e. 128MB)
+
+DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
+DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xFFD01494 0x00010000 # DDR ODT Control (Low)
+# bit3-0: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
+# bit3-0: 1, ODT0Rd, Internal ODT asserted during read from DRAM bank0
+# bit7-4: 1, ODT0Wr, Internal ODT asserted during write to DRAM bank0
+# bit11-10:1, DQ_ODTSel. ODT select turned on
+
+DATA 0xFFD01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
/* Configure and initialize PHY */
void reset_phy(void)
{
+#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+ mv_phy_88e1318_init("egiga0", 0);
+#else
mv_phy_88e1116_init("egiga0", 8);
+#endif
}
#endif
--- /dev/null
+#
+# (C) Copyright 2001-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2010, Thomas Chou <thomas@wytron.com.tw>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := socfpga_cyclone5.o
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/io.h>
+
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Print CPU information
+ */
+int print_cpuinfo(void)
+{
+ puts("CPU : Altera SOCFPGA Platform\n");
+ return 0;
+}
+
+/*
+ * Print Board information
+ */
+int checkboard(void)
+{
+ puts("BOARD : Altera SOCFPGA Cyclone5 Board\n");
+ return 0;
+}
+
+/*
+ * Initialization function which happen at early stage of c code
+ */
+int board_early_init_f(void)
+{
+ return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ icache_enable();
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ return 0;
+}
+
+#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
+int overwrite_console(void)
+{
+ return 0;
+}
+#endif
+
+/*
+ * DesignWare Ethernet initialization
+ */
+/* We know all the init functions have been run now */
+int board_eth_init(bd_t *bis)
+{
+ return 0;
+}
--- /dev/null
+#
+# Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y += armadillo-800eva.o
+COBJS := $(COBJS-y)
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
+
--- /dev/null
+/*
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <asm/processor.h>
+#include <asm/mach-types.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/arch/rmobile.h>
+
+#define s_init_wait(cnt) \
+ ({ \
+ volatile u32 i = 0x10000 * cnt; \
+ while (i > 0) \
+ i--; \
+ })
+
+#define USBCR1 0xE605810A
+
+void s_init(void)
+{
+ struct r8a7740_rwdt *rwdt0 = (struct r8a7740_rwdt *)RWDT0_BASE;
+ struct r8a7740_rwdt *rwdt1 = (struct r8a7740_rwdt *)RWDT1_BASE;
+ struct r8a7740_cpg *cpg = (struct r8a7740_cpg *)CPG_BASE;
+ struct r8a7740_bsc *bsc = (struct r8a7740_bsc *)BSC_BASE;
+ struct r8a7740_ddrp *ddrp = (struct r8a7740_ddrp *)DDRP_BASE;
+ struct r8a7740_dbsc *dbsc = (struct r8a7740_dbsc *)DBSC_BASE;
+
+ /* Watchdog init */
+ writew(0xA500, &rwdt0->rwtcsra0);
+ writew(0xA500, &rwdt1->rwtcsra0);
+
+ /* CPG */
+ writel(0xFF800080, &cpg->rmstpcr4);
+ writel(0xFF800080, &cpg->smstpcr4);
+
+ /* USB clock */
+ writel(0x00000080, &cpg->usbckcr);
+ s_init_wait(1);
+
+ /* USBCR1 */
+ writew(0x0710, USBCR1);
+
+ /* FRQCR */
+ writel(0x00000000, &cpg->frqcrb);
+ writel(0x62030533, &cpg->frqcra);
+ writel(0x208A354E, &cpg->frqcrc);
+ writel(0x80331050, &cpg->frqcrb);
+ s_init_wait(1);
+
+ writel(0x00000000, &cpg->frqcrd);
+ s_init_wait(1);
+
+ /* SUBClk */
+ writel(0x0000010B, &cpg->subckcr);
+
+ /* PLL */
+ writel(0x00004004, &cpg->pllc01cr);
+ s_init_wait(1);
+
+ writel(0xa0000000, &cpg->pllc2cr);
+ s_init_wait(2);
+
+ /* BSC */
+ writel(0x0000001B, &bsc->cmncr);
+
+ writel(0x20000000, &dbsc->dbcmd);
+ writel(0x10009C40, &dbsc->dbcmd);
+ s_init_wait(1);
+
+ writel(0x00000007, &dbsc->dbkind);
+ writel(0x0E030A02, &dbsc->dbconf0);
+ writel(0x00000001, &dbsc->dbphytype);
+ writel(0x00000000, &dbsc->dbbl);
+ writel(0x00000006, &dbsc->dbtr0);
+ writel(0x00000005, &dbsc->dbtr1);
+ writel(0x00000000, &dbsc->dbtr2);
+ writel(0x00000006, &dbsc->dbtr3);
+ writel(0x00080006, &dbsc->dbtr4);
+ writel(0x00000015, &dbsc->dbtr5);
+ writel(0x0000000f, &dbsc->dbtr6);
+ writel(0x00000004, &dbsc->dbtr7);
+ writel(0x00000018, &dbsc->dbtr8);
+ writel(0x00000006, &dbsc->dbtr9);
+ writel(0x00000006, &dbsc->dbtr10);
+ writel(0x0000000F, &dbsc->dbtr11);
+ writel(0x0000000D, &dbsc->dbtr12);
+ writel(0x000000A0, &dbsc->dbtr13);
+ writel(0x000A0003, &dbsc->dbtr14);
+ writel(0x00000003, &dbsc->dbtr15);
+ writel(0x40005005, &dbsc->dbtr16);
+ writel(0x0C0C0000, &dbsc->dbtr17);
+ writel(0x00000200, &dbsc->dbtr18);
+ writel(0x00000040, &dbsc->dbtr19);
+ writel(0x00000001, &dbsc->dbrnk0);
+ writel(0x00000110, &dbsc->dbdficnt);
+ writel(0x00000101, &ddrp->funcctrl);
+ writel(0x00000001, &ddrp->dllctrl);
+ writel(0x00000186, &ddrp->zqcalctrl);
+ writel(0xB3440051, &ddrp->zqodtctrl);
+ writel(0x94449443, &ddrp->rdctrl);
+ writel(0x000000C0, &ddrp->rdtmg);
+ writel(0x00000101, &ddrp->fifoinit);
+ writel(0x02060506, &ddrp->outctrl);
+ writel(0x00004646, &ddrp->dqcalofs1);
+ writel(0x00004646, &ddrp->dqcalofs2);
+ writel(0x800000aa, &ddrp->dqcalexp);
+ writel(0x00000000, &ddrp->dllctrl);
+ writel(0x00000000, DDRPNCNT);
+
+ writel(0x0000000C, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00000002, DDRPNCNT);
+
+ writel(0x0000000C, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00000187, &ddrp->zqcalctrl);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00000010, &dbsc->dbdficnt);
+ writel(0x02060507, &ddrp->outctrl);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x21009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x00009C40, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x11000044, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x2A000000, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x2B000000, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+
+ writel(0x29000004, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+
+ writel(0x28001520, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x03000200, &dbsc->dbcmd);
+ readl(&dbsc->dbwait);
+ s_init_wait(1);
+
+ writel(0x000001FF, &dbsc->dbrfcnf0);
+ writel(0x00010C30, &dbsc->dbrfcnf1);
+ writel(0x00000000, &dbsc->dbrfcnf2);
+
+ writel(0x00000001, &dbsc->dbrfen);
+ writel(0x00000001, &dbsc->dbacen);
+
+ /* BSC */
+ writel(0x00410400, &bsc->cs0bcr);
+ writel(0x00410400, &bsc->cs2bcr);
+ writel(0x00410400, &bsc->cs5bbcr);
+ writel(0x02CB0400, &bsc->cs6abcr);
+
+ writel(0x00000440, &bsc->cs0wcr);
+ writel(0x00000440, &bsc->cs2wcr);
+ writel(0x00000240, &bsc->cs5bwcr);
+ writel(0x00000240, &bsc->cs6awcr);
+
+ writel(0x00000005, &bsc->rbwtcnt);
+ writel(0x00000002, &bsc->cs0wcr2);
+ writel(0x00000002, &bsc->cs2wcr2);
+ writel(0x00000002, &bsc->cs4wcr2);
+}
+
+#define GPIO_ICCR (0xE60581A0)
+#define ICCR_15BIT (1 << 15) /* any time 1 */
+#define IIC0_CONTA (1 << 7)
+#define IIC0_CONTB (1 << 6)
+#define IIC1_CONTA (1 << 5)
+#define IIC1_CONTB (1 << 4)
+#define IIC0_PS33E (1 << 1)
+#define IIC1_PS33E (1 << 0)
+#define GPIO_ICCR_DATA \
+ (ICCR_15BIT | \
+ IIC0_CONTA | IIC0_CONTB | IIC1_CONTA | \
+ IIC1_CONTB | IIC0_PS33E | IIC1_PS33E)
+
+#define MSTPCR1 0xE6150134
+#define TMU0_MSTP125 (1 << 25)
+#define I2C0_MSTP116 (1 << 16)
+
+#define MSTPCR3 0xE615013C
+#define I2C1_MSTP323 (1 << 23)
+#define GETHER_MSTP309 (1 << 9)
+
+#define GPIO_SCIFA1_TXD (0xE60520C4)
+#define GPIO_SCIFA1_RXD (0xE60520C3)
+
+int board_early_init_f(void)
+{
+ /* TMU */
+ clrbits_le32(MSTPCR1, TMU0_MSTP125);
+
+ /* GETHER */
+ clrbits_le32(MSTPCR3, GETHER_MSTP309);
+
+ /* I2C 0/1 */
+ clrbits_le32(MSTPCR1, I2C0_MSTP116);
+ clrbits_le32(MSTPCR3, I2C1_MSTP323);
+
+ /* SCIFA1 */
+ writeb(1, GPIO_SCIFA1_TXD); /* SCIFA1_TXD */
+ writeb(1, GPIO_SCIFA1_RXD); /* SCIFA1_RXD */
+
+ /* IICCR */
+ writew(GPIO_ICCR_DATA, GPIO_ICCR);
+
+ return 0;
+}
+
+DECLARE_GLOBAL_DATA_PTR;
+int board_init(void)
+{
+ /* board id for linux */
+ gd->bd->bi_arch_number = MACH_TYPE_ARMADILLO_800EVA;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = ARMADILLO_800EVA_SDRAM_BASE + 0x100;
+
+ /* Init PFC controller */
+ r8a7740_pinmux_init();
+
+ /* GETHER Enable */
+ gpio_request(GPIO_FN_ET_CRS, NULL);
+ gpio_request(GPIO_FN_ET_MDC, NULL);
+ gpio_request(GPIO_FN_ET_MDIO, NULL);
+ gpio_request(GPIO_FN_ET_TX_ER, NULL);
+ gpio_request(GPIO_FN_ET_RX_ER, NULL);
+ gpio_request(GPIO_FN_ET_ERXD0, NULL);
+ gpio_request(GPIO_FN_ET_ERXD1, NULL);
+ gpio_request(GPIO_FN_ET_ERXD2, NULL);
+ gpio_request(GPIO_FN_ET_ERXD3, NULL);
+ gpio_request(GPIO_FN_ET_TX_CLK, NULL);
+ gpio_request(GPIO_FN_ET_TX_EN, NULL);
+ gpio_request(GPIO_FN_ET_ETXD0, NULL);
+ gpio_request(GPIO_FN_ET_ETXD1, NULL);
+ gpio_request(GPIO_FN_ET_ETXD2, NULL);
+ gpio_request(GPIO_FN_ET_ETXD3, NULL);
+ gpio_request(GPIO_FN_ET_PHY_INT, NULL);
+ gpio_request(GPIO_FN_ET_COL, NULL);
+ gpio_request(GPIO_FN_ET_RX_DV, NULL);
+ gpio_request(GPIO_FN_ET_RX_CLK, NULL);
+
+ gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+ gpio_direction_output(GPIO_PORT18, 1);
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+int board_late_init(void)
+{
+ return 0;
+}
+
+void reset_cpu(ulong addr)
+{
+}
csa |= AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA;
/* NAND flash on D16 */
csa |= AT91_MATRIX_NFD0_ON_D16;
+
+ /* Configure IO drive */
+ csa &= ~AT91_MATRIX_EBI_EBI_IOSR_NORMAL;
+
writel(csa, &matrix->ebicsa);
/* Configure SMC CS3 for NAND/SmartMedia */
static void check_power_switch(void)
{
if (kw_gpio_get_value(GPIO_POWER_SWITCH)) {
- /* turn off HDD and USB power */
+ /* turn off fan, HDD and USB power */
kw_gpio_set_value(GPIO_HDD_POWER, 0);
kw_gpio_set_value(GPIO_USB_VBUS, 0);
+ kw_gpio_set_value(GPIO_FAN_HIGH, 1);
+ kw_gpio_set_value(GPIO_FAN_LOW, 1);
set_led(LED_OFF);
/* loop until released */
/* turn power on again */
kw_gpio_set_value(GPIO_HDD_POWER, 1);
kw_gpio_set_value(GPIO_USB_VBUS, 1);
+ kw_gpio_set_value(GPIO_FAN_HIGH, 0);
+ kw_gpio_set_value(GPIO_FAN_LOW, 0);
set_led(LED_POWER_BLINKING);
}
}
if (davinci_configure_pin_mux(gpio_pins, ARRAY_SIZE(gpio_pins)) != 0)
return 1;
+ /* Set DISP_ON high to enable LCD output*/
+ gpio_direction_output(97, 1);
+
/* Set the RESETOUTn low */
gpio_direction_output(111, 0);
/* Set LCD_B_PWR low to power down LCD Backlight*/
gpio_direction_output(102, 0);
- /* Set DISP_ON low to disable LCD output*/
- gpio_direction_output(97, 0);
-
#ifndef CONFIG_USE_IRQ
irq_init();
#endif
writel(readl(&davinci_syscfg_regs->mstpri[2]) & 0x0fffffff,
&davinci_syscfg_regs->mstpri[2]);
- /* Set LCD_B_PWR low to power up LCD Backlight*/
- gpio_set_value(102, 1);
-
- /* Set DISP_ON low to disable LCD output*/
- gpio_set_value(97, 1);
return 0;
}
+/*
+ * Do not overwrite the console
+ * Use always serial for U-Boot console
+ */
+int overwrite_console(void)
+{
+ return 1;
+}
+
int board_init(void)
{
/* arch number of the board */
int board_late_init(void)
{
+ unsigned char buf[2];
+ int ret;
+
/* PinMux for HALTEN */
if (davinci_configure_pin_mux(halten_pin, ARRAY_SIZE(halten_pin)) != 0)
return 1;
/* Set HALTEN to high */
gpio_direction_output(134, 1);
- setenv("stdout", "serial");
+ /* Set fixed contrast settings for LCD via I2C potentiometer */
+ buf[0] = 0x00;
+ buf[1] = 0xd7;
+ ret = i2c_write(0x2e, 6, 1, buf, 2);
+ if (ret)
+ puts("\nContrast Settings FAILED\n");
+ /* Set LCD_B_PWR high to power up LCD Backlight*/
+ gpio_set_value(102, 1);
return 0;
}
#endif /* CONFIG_BOARD_LATE_INIT */
#ifdef CONFIG_CMD_NET
-#define MII_OPMODE_STRAP_OVERRIDE 0x16
-#define MII_PHY_CTRL1 0x1e
-#define MII_PHY_CTRL2 0x1f
-
-int fecmxc_mii_postcall(int phy)
-{
- miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
- miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
- if (phy == 3)
- miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
- return 0;
-}
-
int board_eth_init(bd_t *bis)
{
struct mxs_clkctrl_regs *clkctrl_regs =
return -EINVAL;
}
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- puts("FEC MXS: Unable to register FEC0 mii postcall\n");
- return ret;
- }
-
dev = eth_get_dev_by_name("FEC1");
if (!dev) {
puts("FEC MXS: Unable to get FEC1 device entry\n");
return -EINVAL;
}
- ret = fecmxc_register_mii_postcall(dev, fecmxc_mii_postcall);
- if (ret) {
- puts("FEC MXS: Unable to register FEC1 mii postcall\n");
- return ret;
- }
-
return ret;
}
return 0;
}
+u32 get_board_rev(void)
+{
+ u32 rev = get_cpu_rev();
+ if (!gpio_get_value(IMX_GPIO_NR(1, 22)))
+ rev |= BOARD_REV_2_0 << BOARD_VER_OFFSET;
+ return rev;
+}
+
static void setup_iomux_uart(void)
{
unsigned int pad = PAD_CTL_HYS_ENABLE | PAD_CTL_PKE_ENABLE |
--- /dev/null
+#
+# (C) Copyright 2012
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := mini2440.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ *
+ * (C) Copyright 2002
+ * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2009
+ * Michel Pollet <buserror@gmail.com>
+ *
+ * (C) Copyright 2012
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/arch/s3c2440.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/gpio.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <netdev.h>
+#include "mini2440.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static inline void pll_delay(unsigned long loops)
+{
+ __asm__ volatile ("1:\n"
+ "subs %0, %1, #1\n"
+ "bne 1b" : "=r" (loops) : "0" (loops));
+}
+
+int board_early_init_f(void)
+{
+ struct s3c24x0_clock_power * const clk_power =
+ s3c24x0_get_base_clock_power();
+
+ /* to reduce PLL lock time, adjust the LOCKTIME register */
+ clk_power->locktime = 0xFFFFFF; /* Max PLL Lock time count */
+ clk_power->clkdivn = CLKDIVN_VAL;
+
+ /* configure UPLL */
+ clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV);
+ /* some delay between MPLL and UPLL */
+ pll_delay(100);
+
+ /* configure MPLL */
+ clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV);
+
+ /* some delay between MPLL and UPLL */
+ pll_delay(10000);
+
+ return 0;
+}
+
+/*
+ * Miscellaneous platform dependent initialisations
+ */
+int board_init(void)
+{
+ struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio();
+
+ /* IOMUX Port H : UART Configuration */
+ gpio->gphcon = IOMUXH_nCTS0 | IOMUXH_nRTS0 | IOMUXH_TXD0 | IOMUXH_RXD0 |
+ IOMUXH_TXD1 | IOMUXH_RXD1 | IOMUXH_TXD2 | IOMUXH_RXD2;
+
+ gpio_direction_output(GPH8, 0);
+ gpio_direction_output(GPH9, 0);
+ gpio_direction_output(GPH10, 0);
+
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_BOOT_PARAM_ADDR;
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ struct s3c24x0_memctl *memctl = s3c24x0_get_base_memctl();
+
+ /*
+ * Configuring bus width and timing
+ * Initialize clocks for each bank 0..5
+ * Bank 3 and 4 are used for DM9000
+ */
+ writel(BANK_CONF, &memctl->bwscon);
+ writel(B0_CONF, &memctl->bankcon[0]);
+ writel(B1_CONF, &memctl->bankcon[1]);
+ writel(B2_CONF, &memctl->bankcon[2]);
+ writel(B3_CONF, &memctl->bankcon[3]);
+ writel(B4_CONF, &memctl->bankcon[4]);
+ writel(B5_CONF, &memctl->bankcon[5]);
+
+ /* Bank 6 and 7 are used for DRAM */
+ writel(SDRAM_64MB, &memctl->bankcon[6]);
+ writel(SDRAM_64MB, &memctl->bankcon[7]);
+
+ writel(MEM_TIMING, &memctl->refresh);
+ writel(BANKSIZE_CONF, &memctl->banksize);
+ writel(B6_MRSR, &memctl->mrsrb6);
+ writel(B7_MRSR, &memctl->mrsrb7);
+
+ gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_SIZE);
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_DRIVER_DM9000
+ return dm9000_initialize(bis);
+#else
+ return 0;
+#endif
+}
--- /dev/null
+#ifndef __MINI2440_BOARD_CONF_H__
+#define __MINI2440_BOARD_CONF_H__
+
+/* PLL Parameters */
+#define CLKDIVN_VAL 7
+#define M_MDIV 0x7f
+#define M_PDIV 0x2
+#define M_SDIV 0x1
+
+#define U_M_MDIV 0x38
+#define U_M_PDIV 0x2
+#define U_M_SDIV 0x2
+
+/* BWSCON */
+#define DW8 0x0
+#define DW16 0x1
+#define DW32 0x2
+#define WAIT (0x1<<2)
+#define UBLB (0x1<<3)
+
+#define B1_BWSCON (DW32)
+#define B2_BWSCON (DW16)
+#define B3_BWSCON (DW16 + WAIT + UBLB)
+#define B4_BWSCON (DW16 + WAIT + UBLB)
+#define B5_BWSCON (DW16)
+#define B6_BWSCON (DW32)
+#define B7_BWSCON (DW32)
+
+/*
+ * Bank Configuration
+ */
+#define B0_Tacs 0x0 /* 0clk */
+#define B0_Tcos 0x0 /* 0clk */
+#define B0_Tacc 0x7 /* 14clk */
+#define B0_Tcoh 0x0 /* 0clk */
+#define B0_Tah 0x0 /* 0clk */
+#define B0_Tacp 0x0 /* 0clk */
+#define B0_PMC 0x0 /* normal */
+
+#define B1_Tacs 0x0
+#define B1_Tcos 0x0
+#define B1_Tacc 0x7
+#define B1_Tcoh 0x0
+#define B1_Tah 0x0
+#define B1_Tacp 0x0
+#define B1_PMC 0x0
+
+#define B2_Tacs 0x0
+#define B2_Tcos 0x0
+#define B2_Tacc 0x7
+#define B2_Tcoh 0x0
+#define B2_Tah 0x0
+#define B2_Tacp 0x0
+#define B2_PMC 0x0
+
+#define B3_Tacs 0x0
+#define B3_Tcos 0x3 /* 4clk */
+#define B3_Tacc 0x7
+#define B3_Tcoh 0x1 /* 1clk */
+#define B3_Tah 0x3 /* 4clk */
+#define B3_Tacp 0x0
+#define B3_PMC 0x0
+
+#define B4_Tacs 0x0
+#define B4_Tcos 0x3
+#define B4_Tacc 0x7
+#define B4_Tcoh 0x1
+#define B4_Tah 0x3
+#define B4_Tacp 0x0
+#define B4_PMC 0x0
+
+#define B5_Tacs 0x0
+#define B5_Tcos 0x0
+#define B5_Tacc 0x7
+#define B5_Tcoh 0x0
+#define B5_Tah 0x0
+#define B5_Tacp 0x0
+#define B5_PMC 0x0
+
+/*
+ * SDRAM Configuration
+ */
+#define SDRAM_MT 0x3 /* SDRAM */
+#define SDRAM_Trcd 0x0 /* 2clk */
+#define SDRAM_SCAN_9 0x1 /* 9bit */
+#define SDRAM_SCAN_10 0x2 /* 10bit */
+
+#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
+
+/*
+ * Refresh Parameter
+ */
+#define REFEN 0x1 /* Refresh enable */
+#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
+#define Trp 0x1 /* 3clk */
+#define Trc 0x3 /* 7clk */
+#define Tchr 0x0 /* unused */
+#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
+
+/*
+ * MRSR Parameter
+ */
+#define BL 0x0
+#define BT 0x0
+#define CL 0x3 /* 3 clocks */
+#define TM 0x0
+#define WBL 0x0
+
+/*
+ * BankSize Parameter
+ */
+#define BK76MAP 0x2 /* 128MB/128MB */
+#define SCLK_EN 0x1 /* SCLK active */
+#define SCKE_EN 0x1 /* SDRAM power down mode enable */
+#define BURST_EN 0x1 /* Burst enable */
+
+/*
+ * Register values
+ */
+#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
+ (B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
+ (B7_BWSCON<<28)))
+
+#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
+ (B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
+#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
+ (B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
+#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
+ (B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
+#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
+ (B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
+#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
+ (B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
+#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
+ (B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
+
+#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
+ (Trc<<18) + (Tchr<<16) + REFCNT
+
+#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
+#define B6_MRSR (CL<<4)
+#define B7_MRSR (CL<<4)
+
+#endif
--- /dev/null
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := iconnect.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "iconnect.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(ICONNECT_OE_VAL_LOW,
+ ICONNECT_OE_VAL_HIGH,
+ ICONNECT_OE_LOW, ICONNECT_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn, /* Reset signal */
+ MPP7_GPO,
+ MPP8_TW_SDA, /* I2C */
+ MPP9_TW_SCK, /* I2C */
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_GPO, /* Reset button */
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_GE1_0,
+ MPP21_GE1_1,
+ MPP22_GE1_2,
+ MPP23_GE1_3,
+ MPP24_GE1_4,
+ MPP25_GE1_5,
+ MPP26_GE1_6,
+ MPP27_GE1_7,
+ MPP28_GPIO,
+ MPP29_GPIO,
+ MPP30_GE1_10,
+ MPP31_GE1_11,
+ MPP32_GE1_12,
+ MPP33_GE1_13,
+ MPP34_GE1_14,
+ MPP35_GPIO, /* OTB button */
+ MPP36_AUDIO_SPDIFI,
+ MPP37_AUDIO_SPDIFO,
+ MPP38_GPIO,
+ MPP39_TDM_SPI_CS0,
+ MPP40_TDM_SPI_SCK,
+ MPP41_GPIO, /* LED brightness */
+ MPP42_GPIO, /* LED power (blue) */
+ MPP43_GPIO, /* LED power (red) */
+ MPP44_GPIO, /* LED USB 1 */
+ MPP45_GPIO, /* LED USB 2 */
+ MPP46_GPIO, /* LED USB 3 */
+ MPP47_GPIO, /* LED USB 4 */
+ MPP48_GPIO, /* LED OTB */
+ MPP49_GPIO,
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config, NULL);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ICONNECT_H
+#define __ICONNECT_H
+
+#define ICONNECT_OE_LOW (~(1 << 7))
+#define ICONNECT_OE_HIGH (~(1 << 10))
+#define ICONNECT_OE_VAL_LOW (0)
+#define ICONNECT_OE_VAL_HIGH (1 << 10)
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __ICONNECT_H */
--- /dev/null
+#
+# (C) Copyright 2009-2012
+# Wojciech Dubowik <wojciech.dubowik@neratec.com>
+# Luka Perkov <uboot@lukaperkov.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xffd100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xffd01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
+# bit23-14: 0x0,
+# bit24: 0x1, enable exit self refresh mode on DDR access
+# bit25: 0x1, required
+# bit29-26: 0x0,
+# bit31-30: 0x1,
+
+DATA 0xffd01404 0x37543000 # DDR Controller Control Low
+# bit4: 0x0, addr/cmd in smame cycle
+# bit5: 0x0, clk is driven during self refresh, we don't care for APX
+# bit6: 0x0, use recommended falling edge of clk for addr/cmd
+# bit14: 0x0, input buffer always powered up
+# bit18: 0x1, cpu lock transaction enabled
+# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 0x3, required
+# bit31: 0x0, no additional STARTBURST delay
+
+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11-8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: 0x0, required
+
+DATA 0xffd01410 0x000000cc # DDR Address Control
+# bit1-0: 00, Cs0width (x8)
+# bit3-2: 11, Cs0size (1Gb)
+# bit5-4: 00, Cs1width (x8)
+# bit7-6: 11, Cs1size (1Gb)
+# bit9-8: 00, Cs2width (nonexistent)
+# bit11-10: 00, Cs2size (nonexistent)
+# bit13-12: 00, Cs3width (nonexistent)
+# bit15-14: 00, Cs3size (nonexistent)
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0x0, required
+
+DATA 0xffd01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0x0, required
+
+DATA 0xffd01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0x0, required
+
+DATA 0xffd0141c 0x00000c52 # DDR Mode
+# bit2-0: 0x2, BurstLen=2 required
+# bit3: 0x0, BurstType=0 required
+# bit6-4: 0x4, CL=5
+# bit7: 0x0, TestMode=0 normal
+# bit8: 0x0, DLL reset=0 normal
+# bit11-9: 0x6, auto-precharge write recovery ????????????
+# bit12: 0x0, PD must be zero
+# bit31-13: 0x0, required
+
+DATA 0xffd01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 0x0, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 0x0, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0x0, required
+
+DATA 0xffd01424 0x0000f17f # DDR Controller Control High
+# bit2-0: 0x7, required
+# bit3: 0x1, MBUS Burst Chop disabled
+# bit6-4: 0x7, required
+# bit7: 0x0,
+# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9: 0x0, no half clock cycle addition to dataout
+# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 0xf, required
+# bit31-16: 0x0, required
+
+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
+# bit0: 0x1, Window enabled
+# bit1: 0x0, Write Protect disabled
+# bit3-2: 0x0, CS0 hit selected
+# bit23-4: 0xfffff, required
+# bit31-24: 0x0f, Size (i.e. 256MB)
+
+DATA 0xffd01508 0x00000000 # CS[1]n Base address to 256Mb
+DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled
+
+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
+# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
+# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 0x1, ODT1 active NEVER!
+# bit31-4: 0x0, required
+
+DATA 0xffd0149c 0x0000e803 # CPU ODT Control
+DATA 0xffd01480 0x00000001 # DDR Initialization Control
+# bit0: 0x1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
write32 0x53f80064, 0x45600000
write32 0x53f80008, 0x20034000
+ /*
+ * PCDR2: NFC = 33.25 MHz
+ * This is required for the NAND Flash of this board, which is a Samsung
+ * K9F1G08U0B with 25-ns R/W cycle times, in order to make it work with
+ * the NFC driver in symmetric (i.e. one-cycle) mode.
+ */
+ write32 0x53f80020, 0x01010103
+
/*
* enable all implemented clocks in all three
* clock control registers
tmp = readl(KW_GPIO0_BASE + 4);
writel(tmp & (~KM_KIRKWOOD_SOFT_I2C_GPIOS) , KW_GPIO0_BASE + 4);
#endif
-
+ /* adjust SDRAM size for bank 0 */
+ kw_sdram_size_adjust(0);
kirkwood_mpp_conf(kwmpp_config, NULL);
return 0;
}
/* reset the phy */
miiphy_reset(name, CONFIG_PHY_BASE_ADR);
}
+#elif defined(CONFIG_KM_PIGGY4_88E6352)
+
+#include <mv88e6352.h>
+
+#if defined(CONFIG_KM_NUSA)
+struct mv88e_sw_reg extsw_conf[] = {
+ /*
+ * port 0, PIGGY4, autoneg
+ * first the fix for the 1000Mbits Autoneg, this is from
+ * a Marvell errata, the regs are undocumented
+ */
+ { PHY(0), PHY_PAGE, AN1000FIX_PAGE },
+ { PHY(0), PHY_STATUS, AN1000FIX },
+ { PHY(0), PHY_PAGE, 0 },
+ /* now the real port and phy configuration */
+ { PORT(0), PORT_PHY, NO_SPEED_FOR },
+ { PORT(0), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ { PHY(0), PHY_1000_CTRL, NO_ADV },
+ { PHY(0), PHY_SPEC_CTRL, AUTO_MDIX_EN },
+ { PHY(0), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST |
+ FULL_DUPLEX },
+ /* port 1, unused */
+ { PORT(1), PORT_CTRL, PORT_DIS },
+ { PHY(1), PHY_CTRL, PHY_PWR_DOWN },
+ { PHY(1), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+ /* port 2, unused */
+ { PORT(2), PORT_CTRL, PORT_DIS },
+ { PHY(2), PHY_CTRL, PHY_PWR_DOWN },
+ { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+ /* port 3, unused */
+ { PORT(3), PORT_CTRL, PORT_DIS },
+ { PHY(3), PHY_CTRL, PHY_PWR_DOWN },
+ { PHY(3), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+ /* port 4, ICNEV, SerDes, SGMII */
+ { PORT(4), PORT_STATUS, NO_PHY_DETECT },
+ { PORT(4), PORT_PHY, SPEED_1000_FOR },
+ { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ { PHY(4), PHY_CTRL, PHY_PWR_DOWN },
+ { PHY(4), PHY_SPEC_CTRL, SPEC_PWR_DOWN },
+ /* port 5, CPU_RGMII */
+ { PORT(5), PORT_PHY, RX_RGMII_TIM | TX_RGMII_TIM | FLOW_CTRL_EN |
+ FLOW_CTRL_FOR | LINK_VAL | LINK_FOR | FULL_DPX |
+ FULL_DPX_FOR | SPEED_1000_FOR },
+ { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL },
+ /* port 6, unused, this port has no phy */
+ { PORT(6), PORT_CTRL, PORT_DIS },
+};
+#else
+struct mv88e_sw_reg extsw_conf[] = {};
+#endif
+
+void reset_phy(void)
+{
+#if defined(CONFIG_KM_MVEXTSW_ADDR)
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf,
+ ARRAY_SIZE(extsw_conf));
+ mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR);
+#endif
+}
+
#else
/* Configure and enable MV88E1118 PHY on the piggy*/
void reset_phy(void)
--- /dev/null
+#
+# (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+# (C) Copyright 2012 Renesas Solutions Corp.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := kzm9g.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj) .depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * (C) Copyright 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <netdev.h>
+#include <i2c.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define CS0BCR_D (0x06C00400)
+#define CS4BCR_D (0x16c90400)
+#define CS0WCR_D (0x55062C42)
+#define CS4WCR_D (0x1e071dc3)
+
+#define CMNCR_BROMMD0 (1 << 21)
+#define CMNCR_BROMMD1 (1 << 22)
+#define CMNCR_BROMMD (CMNCR_BROMMD0|CMNCR_BROMMD1)
+#define VCLKCR1_D (0x27)
+
+#define SMSTPCR1_CMT0 (1 << 24)
+#define SMSTPCR1_I2C0 (1 << 16)
+#define SMSTPCR3_USB (1 << 22)
+
+#define PORT32CR (0xE6051020)
+#define PORT33CR (0xE6051021)
+#define PORT34CR (0xE6051022)
+#define PORT35CR (0xE6051023)
+
+static int cmp_loop(u32 *addr, u32 data, u32 cmp)
+{
+ int err = -1;
+ int timeout = 100;
+ u32 value;
+
+ while (timeout > 0) {
+ value = readl(addr);
+ if ((value & data) == cmp) {
+ err = 0;
+ break;
+ }
+ timeout--;
+ }
+
+ return err;
+}
+
+/* SBSC Init function */
+static void sbsc_init(struct sh73a0_sbsc *sbsc)
+{
+ writel(readl(&sbsc->dllcnt0)|0x2, &sbsc->dllcnt0);
+ writel(0x5, &sbsc->sdgencnt);
+ cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
+
+ writel(0xacc90159, &sbsc->sdcr0);
+ writel(0x00010059, &sbsc->sdcr1);
+ writel(0x50874114, &sbsc->sdwcrc0);
+ writel(0x33199b37, &sbsc->sdwcrc1);
+ writel(0x008f2313, &sbsc->sdwcrc2);
+ writel(0x31020707, &sbsc->sdwcr00);
+ writel(0x0017040a, &sbsc->sdwcr01);
+ writel(0x31020707, &sbsc->sdwcr10);
+ writel(0x0017040a, &sbsc->sdwcr11);
+ writel(0x05555555, &sbsc->sddrvcr0);
+ writel(0x30000000, &sbsc->sdwcr2);
+
+ writel(readl(&sbsc->sdpcr) | 0x80, &sbsc->sdpcr);
+ cmp_loop(&sbsc->sdpcr, 0x80, 0x80);
+
+ writel(0x00002710, &sbsc->sdgencnt);
+ cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
+
+ writel(0x0000003f, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1A);
+ writel(0x000001f4, &sbsc->sdgencnt);
+ cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
+
+ writel(0x0000ff0a, &sbsc->sdmracr0);
+ if (sbsc == (struct sh73a0_sbsc *)SBSC1_BASE)
+ writel(0x0, SDMRA3A);
+ else
+ writel(0x0, SDMRA3B);
+
+ writel(0x00000032, &sbsc->sdgencnt);
+ cmp_loop(&sbsc->sdgencnt, 0xffffffff, 0x0);
+
+ if (sbsc == (struct sh73a0_sbsc *)SBSC1_BASE) {
+ writel(0x00002201, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1A);
+ writel(0x00000402, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1A);
+ writel(0x00000403, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1A);
+ writel(0x0, SDMRA2A);
+ } else {
+ writel(0x00002201, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1B);
+ writel(0x00000402, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1B);
+ writel(0x00000403, &sbsc->sdmracr0);
+ writel(0x0, SDMRA1B);
+ writel(0x0, SDMRA2B);
+ }
+
+ writel(0x88800004, &sbsc->sdmrtmpcr);
+ writel(0x00000004, &sbsc->sdmrtmpmsk);
+ writel(0xa55a0032, &sbsc->rtcor);
+ writel(0xa55a000c, &sbsc->rtcorh);
+ writel(0xa55a2048, &sbsc->rtcsr);
+ writel(readl(&sbsc->sdcr0)|0x800, &sbsc->sdcr0);
+ writel(readl(&sbsc->sdcr1)|0x400, &sbsc->sdcr1);
+ writel(0xfff20000, &sbsc->zqccr);
+
+ /* SCBS2 only */
+ if (sbsc == (struct sh73a0_sbsc *)SBSC2_BASE) {
+ writel(readl(&sbsc->sdpdcr0)|0x00030000, &sbsc->sdpdcr0);
+ writel(0xa5390000, &sbsc->dphycnt1);
+ writel(0x00001200, &sbsc->dphycnt0);
+ writel(0x07ce0000, &sbsc->dphycnt1);
+ writel(0x00001247, &sbsc->dphycnt0);
+ cmp_loop(&sbsc->dphycnt2, 0xffffffff, 0x07ce0000);
+ writel(readl(&sbsc->sdpdcr0) & 0xfffcffff, &sbsc->sdpdcr0);
+ }
+}
+
+void s_init(void)
+{
+ struct sh73a0_rwdt *rwdt = (struct sh73a0_rwdt *)RWDT_BASE;
+ struct sh73a0_sbsc_cpg *cpg = (struct sh73a0_sbsc_cpg *)CPG_BASE;
+ struct sh73a0_sbsc_cpg_srcr *cpg_srcr =
+ (struct sh73a0_sbsc_cpg_srcr *)CPG_SRCR_BASE;
+ struct sh73a0_sbsc *sbsc1 = (struct sh73a0_sbsc *)SBSC1_BASE;
+ struct sh73a0_sbsc *sbsc2 = (struct sh73a0_sbsc *)SBSC2_BASE;
+ struct sh73a0_hpb *hpb = (struct sh73a0_hpb *)HPB_BASE;
+ struct sh73a0_hpb_bscr *hpb_bscr =
+ (struct sh73a0_hpb_bscr *)HPBSCR_BASE;
+
+ /* Watchdog init */
+ writew(0xA507, &rwdt->rwtcsra0);
+
+ /* Secure control register Init */
+ #define LIFEC_SEC_SRC_BIT (1 << 15)
+ writel(readl(LIFEC_SEC_SRC) & ~LIFEC_SEC_SRC_BIT, LIFEC_SEC_SRC);
+
+ clrbits_le32(&cpg->smstpcr3, (1 << 15));
+ clrbits_le32(&cpg_srcr->srcr3, (1 << 15));
+ clrbits_le32(&cpg->smstpcr2, (1 << 18));
+ clrbits_le32(&cpg_srcr->srcr2, (1 << 18));
+ writel(0x0, &cpg->pllecr);
+
+ cmp_loop(&cpg->pllecr, 0x00000F00, 0x0);
+ cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
+
+ writel(0x2D000000, &cpg->pll0cr);
+ writel(0x17100000, &cpg->pll1cr);
+ writel(0x96235880, &cpg->frqcrb);
+ cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
+
+ writel(0xB, &cpg->flckcr);
+ clrbits_le32(&cpg->smstpcr0, (1 << 1));
+
+ clrbits_le32(&cpg_srcr->srcr0, (1 << 1));
+ writel(0x0514, &hpb_bscr->smgpiotime);
+ writel(0x0514, &hpb_bscr->smcmt2time);
+ writel(0x0514, &hpb_bscr->smcpgtime);
+ writel(0x0514, &hpb_bscr->smsysctime);
+
+ writel(0x00092000, &cpg->dvfscr4);
+ writel(0x000000DC, &cpg->dvfscr5);
+ writel(0x0, &cpg->pllecr);
+ cmp_loop(&cpg->pllecr, 0x00000F00, 0x0);
+
+ /* FRQCR Init */
+ writel(0x0012453C, &cpg->frqcra);
+ writel(0x80331350, &cpg->frqcrb);
+ cmp_loop(&cpg->frqcrb, 0x80000000, 0x0);
+ writel(0x00000B0B, &cpg->frqcrd);
+ cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
+
+ /* Clock Init */
+ writel(0x00000003, PCLKCR);
+ writel(0x0000012F, &cpg->vclkcr1);
+ writel(0x00000119, &cpg->vclkcr2);
+ writel(0x00000119, &cpg->vclkcr3);
+ writel(0x00000002, &cpg->zbckcr);
+ writel(0x00000005, &cpg->flckcr);
+ writel(0x00000080, &cpg->sd0ckcr);
+ writel(0x00000080, &cpg->sd1ckcr);
+ writel(0x00000080, &cpg->sd2ckcr);
+ writel(0x0000003F, &cpg->fsiackcr);
+ writel(0x0000003F, &cpg->fsibckcr);
+ writel(0x00000080, &cpg->subckcr);
+ writel(0x0000000B, &cpg->spuackcr);
+ writel(0x0000000B, &cpg->spuvckcr);
+ writel(0x0000013F, &cpg->msuckcr);
+ writel(0x00000080, &cpg->hsickcr);
+ writel(0x0000003F, &cpg->mfck1cr);
+ writel(0x0000003F, &cpg->mfck2cr);
+ writel(0x00000107, &cpg->dsitckcr);
+ writel(0x00000313, &cpg->dsi0pckcr);
+ writel(0x0000130D, &cpg->dsi1pckcr);
+ writel(0x2A800E0E, &cpg->dsi0phycr);
+ writel(0x1E000000, &cpg->pll0cr);
+ writel(0x2D000000, &cpg->pll0cr);
+ writel(0x17100000, &cpg->pll1cr);
+ writel(0x27000080, &cpg->pll2cr);
+ writel(0x1D000000, &cpg->pll3cr);
+ writel(0x00080000, &cpg->pll0stpcr);
+ writel(0x000120C0, &cpg->pll1stpcr);
+ writel(0x00012000, &cpg->pll2stpcr);
+ writel(0x00000030, &cpg->pll3stpcr);
+
+ writel(0x0000000B, &cpg->pllecr);
+ cmp_loop(&cpg->pllecr, 0x00000B00, 0x00000B00);
+
+ writel(0x000120F0, &cpg->dvfscr3);
+ writel(0x00000020, &cpg->mpmode);
+ writel(0x0000028A, &cpg->vrefcr);
+ writel(0xE4628087, &cpg->rmstpcr0);
+ writel(0xFFFFFFFF, &cpg->rmstpcr1);
+ writel(0x53FFFFFF, &cpg->rmstpcr2);
+ writel(0xFFFFFFFF, &cpg->rmstpcr3);
+ writel(0x00800D3D, &cpg->rmstpcr4);
+ writel(0xFFFFF3FF, &cpg->rmstpcr5);
+ writel(0x00000000, &cpg->smstpcr2);
+ writel(0x00040000, &cpg_srcr->srcr2);
+
+ clrbits_le32(&cpg->pllecr, (1 << 3));
+ cmp_loop(&cpg->pllecr, 0x00000800, 0x0);
+
+ writel(0x00000001, &hpb->hpbctrl6);
+ cmp_loop(&hpb->hpbctrl6, 0x1, 0x1);
+
+ writel(0x00001414, &cpg->frqcrd);
+ cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
+
+ writel(0x1d000000, &cpg->pll3cr);
+ setbits_le32(&cpg->pllecr, (1 << 3));
+ cmp_loop(&cpg->pllecr, 0x800, 0x800);
+
+ /* SBSC1 Init*/
+ sbsc_init(sbsc1);
+
+ /* SBSC2 Init*/
+ sbsc_init(sbsc2);
+
+ writel(0x00000b0b, &cpg->frqcrd);
+ cmp_loop(&cpg->frqcrd, 0x80000000, 0x0);
+ writel(0xfffffffc, &cpg->cpgxxcs4);
+}
+
+int board_early_init_f(void)
+{
+ struct sh73a0_sbsc_cpg *cpg = (struct sh73a0_sbsc_cpg *)CPG_BASE;
+ struct sh73a0_bsc *bsc = (struct sh73a0_bsc *)BSC_BASE;
+ struct sh73a0_sbsc_cpg_srcr *cpg_srcr =
+ (struct sh73a0_sbsc_cpg_srcr *)CPG_SRCR_BASE;
+
+ writel(CS0BCR_D, &bsc->cs0bcr);
+ writel(CS4BCR_D, &bsc->cs4bcr);
+ writel(CS0WCR_D, &bsc->cs0wcr);
+ writel(CS4WCR_D, &bsc->cs4wcr);
+
+ clrsetbits_le32(&bsc->cmncr, ~CMNCR_BROMMD, CMNCR_BROMMD);
+
+ clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
+ clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
+ clrbits_le32(&cpg->smstpcr3, SMSTPCR3_USB);
+ clrbits_le32(&cpg_srcr->srcr3, SMSTPCR3_USB);
+ writel(VCLKCR1_D, &cpg->vclkcr1);
+
+ /* Setup SCIF4 / workaround */
+ writeb(0x12, PORT32CR);
+ writeb(0x22, PORT33CR);
+ writeb(0x12, PORT34CR);
+ writeb(0x22, PORT35CR);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ sh73a0_pinmux_init();
+
+ /* SCIFA 4 */
+ gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+ gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+ gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+ /* Ethernet/SMSC */
+ gpio_request(GPIO_PORT224, NULL);
+ gpio_direction_input(GPIO_PORT224);
+
+ /* SMSC/USB */
+ gpio_request(GPIO_FN_CS4_, NULL);
+
+ /* MMCIF */
+ gpio_request(GPIO_FN_MMCCLK0, NULL);
+ gpio_request(GPIO_FN_MMCCMD0_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_0_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_1_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_2_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_3_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_4_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
+ gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
+
+ /* SDHI */
+ gpio_request(GPIO_FN_SDHIWP0, NULL);
+ gpio_request(GPIO_FN_SDHICD0, NULL);
+ gpio_request(GPIO_FN_SDHICMD0, NULL);
+ gpio_request(GPIO_FN_SDHICLK0, NULL);
+ gpio_request(GPIO_FN_SDHID0_3, NULL);
+ gpio_request(GPIO_FN_SDHID0_2, NULL);
+ gpio_request(GPIO_FN_SDHID0_1, NULL);
+ gpio_request(GPIO_FN_SDHID0_0, NULL);
+ gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON, NULL);
+ gpio_request(GPIO_PORT15, NULL);
+ gpio_direction_output(GPIO_PORT15, 1);
+
+ /* I2C */
+ gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
+ gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+
+ gd->bd->bi_boot_params = (CONFIG_SYS_SDRAM_BASE + 0x100);
+
+ return 0;
+}
+
+const struct rmobile_sysinfo sysinfo = {
+ CONFIG_RMOBILE_BOARD_STRING
+};
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+#ifdef CONFIG_SMC911X
+ ret = smc911x_initialize(0, CONFIG_SMC911X_BASE);
+#endif
+ return ret;
+}
+
+void reset_cpu(ulong addr)
+{
+ /* Soft Power On Reset */
+ writel((1 << 31), RESCNT2);
+}
#include <common.h>
#include <miiphy.h>
+#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/kirkwood.h>
#include <asm/arch/mpp.h>
IB62x0_OE_VAL_HIGH,
IB62x0_OE_LOW, IB62x0_OE_HIGH);
+ /* Set SATA activity LEDs to default off */
+ writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG);
/* Multi-Purpose Pins Functionality configuration */
u32 kwmpp_config[] = {
MPP0_NF_IO2,
#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+/* SATAHC related */
+#define MVSATAHC_LED_CONF_REG (MV_SATA_BASE + 0x2C)
+#define MVSATAHC_LED_POLARITY_CTRL (1 << 3)
+
#endif /* __IB62x0_H */
--- /dev/null
+#
+# (C) Copyright 2000-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+ifndef CONFIG_SPL_BUILD
+COBJS := fpga.o $(BOARD).o
+endif
+SOBJS :=
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spartan3.h>
+#include <command.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_misc.h>
+#include <asm/arch/spr_ssp.h>
+
+/*
+ * FPGA program pin configuration on X600:
+ *
+ * Only PROG and DONE are connected to GPIOs. INIT is not connected to the
+ * SoC at all. And CLOCK and DATA are connected to the SSP2 port. We use
+ * 16bit serial writes via this SSP port to write the data bits into the
+ * FPGA.
+ */
+#define CONFIG_SYS_FPGA_PROG 2
+#define CONFIG_SYS_FPGA_DONE 3
+
+/*
+ * Set the active-low FPGA reset signal.
+ */
+static void fpga_reset(int assert)
+{
+ /*
+ * On x600 we have no means to toggle the FPGA reset signal
+ */
+ debug("%s:%d: RESET (%d)\n", __func__, __LINE__, assert);
+}
+
+/*
+ * Set the FPGA's active-low SelectMap program line to the specified level
+ */
+static int fpga_pgm_fn(int assert, int flush, int cookie)
+{
+ debug("%s:%d: FPGA PROG (%d)\n", __func__, __LINE__, assert);
+
+ gpio_set_value(CONFIG_SYS_FPGA_PROG, assert);
+
+ return assert;
+}
+
+/*
+ * Test the state of the active-low FPGA INIT line. Return 1 on INIT
+ * asserted (low).
+ */
+static int fpga_init_fn(int cookie)
+{
+ static int state;
+
+ debug("%s:%d: init (state=%d)\n", __func__, __LINE__, state);
+
+ /*
+ * On x600, the FPGA INIT signal is not connected to the SoC.
+ * We can't read the INIT status. Let's return the "correct"
+ * INIT signal state generated via a local state-machine.
+ */
+ if (++state == 1) {
+ return 1;
+ } else {
+ state = 0;
+ return 0;
+ }
+}
+
+/*
+ * Test the state of the active-high FPGA DONE pin
+ */
+static int fpga_done_fn(int cookie)
+{
+ struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+
+ /*
+ * Wait for Tx-FIFO to become empty before looking for DONE
+ */
+ while (!(readl(&ssp->sspsr) & SSPSR_TFE))
+ ;
+
+ if (gpio_get_value(CONFIG_SYS_FPGA_DONE))
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * FPGA pre-configuration function. Just make sure that
+ * FPGA reset is asserted to keep the FPGA from starting up after
+ * configuration.
+ */
+static int fpga_pre_config_fn(int cookie)
+{
+ debug("%s:%d: FPGA pre-configuration\n", __func__, __LINE__);
+ fpga_reset(TRUE);
+
+ return 0;
+}
+
+/*
+ * FPGA post configuration function. Blip the FPGA reset line and then see if
+ * the FPGA appears to be running.
+ */
+static int fpga_post_config_fn(int cookie)
+{
+ int rc = 0;
+
+ debug("%s:%d: FPGA post configuration\n", __func__, __LINE__);
+
+ fpga_reset(TRUE);
+ udelay(100);
+ fpga_reset(FALSE);
+ udelay(100);
+
+ return rc;
+}
+
+static int fpga_clk_fn(int assert_clk, int flush, int cookie)
+{
+ /*
+ * No dedicated clock signal on x600 (data & clock generated)
+ * in SSP interface. So we don't have to do anything here.
+ */
+ return assert_clk;
+}
+
+static int fpga_wr_fn(int assert_write, int flush, int cookie)
+{
+ struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+ static int count;
+ static u16 data;
+
+ /*
+ * First collect 16 bits of data
+ */
+ data = data << 1;
+ if (assert_write)
+ data |= 1;
+
+ /*
+ * If 16 bits are not available, return for more bits
+ */
+ count++;
+ if (count != 16)
+ return assert_write;
+
+ count = 0;
+
+ /*
+ * Wait for Tx-FIFO to become ready
+ */
+ while (!(readl(&ssp->sspsr) & SSPSR_TNF))
+ ;
+
+ /* Send 16 bits to FPGA via SSP bus */
+ writel(data, &ssp->sspdr);
+
+ return assert_write;
+}
+
+static Xilinx_Spartan3_Slave_Serial_fns x600_fpga_fns = {
+ fpga_pre_config_fn,
+ fpga_pgm_fn,
+ fpga_clk_fn,
+ fpga_init_fn,
+ fpga_done_fn,
+ fpga_wr_fn,
+ fpga_post_config_fn,
+};
+
+static Xilinx_desc fpga[CONFIG_FPGA_COUNT] = {
+ XILINX_XC3S1200E_DESC(slave_serial, &x600_fpga_fns, 0)
+};
+
+/*
+ * Initialize the SelectMap interface. We assume that the mode and the
+ * initial state of all of the port pins have already been set!
+ */
+static void fpga_serialslave_init(void)
+{
+ debug("%s:%d: Initialize serial slave interface\n", __func__, __LINE__);
+ fpga_pgm_fn(FALSE, FALSE, 0); /* make sure program pin is inactive */
+}
+
+static int expi_setup(int freq)
+{
+ struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ int pll2_m, pll2_n, pll2_p, expi_x, expi_y;
+
+ pll2_m = (freq * 2) / 1000;
+ pll2_n = 15;
+ pll2_p = 1;
+ expi_x = 1;
+ expi_y = 2;
+
+ /*
+ * Disable reset, Low compression, Disable retiming, Enable Expi,
+ * Enable soft reset, DMA, PLL2, Internal
+ */
+ writel(EXPI_CLK_CFG_LOW_COMPR | EXPI_CLK_CFG_CLK_EN | EXPI_CLK_CFG_RST |
+ EXPI_CLK_SYNT_EN | EXPI_CLK_CFG_SEL_PLL2 |
+ EXPI_CLK_CFG_INT_CLK_EN | (expi_y << 16) | (expi_x << 24),
+ &misc->expi_clk_cfg);
+
+ /*
+ * 6 uA, Internal feedback, 1st order, Non-dithered, Sample Parameters,
+ * Enable PLL2, Disable reset
+ */
+ writel((pll2_m << 24) | (pll2_p << 8) | (pll2_n), &misc->pll2_frq);
+ writel(PLL2_CNTL_6UA | PLL2_CNTL_SAMPLE | PLL2_CNTL_ENABLE |
+ PLL2_CNTL_RESETN | PLL2_CNTL_LOCK, &misc->pll2_cntl);
+
+ /*
+ * Disable soft reset
+ */
+ clrbits_le32(&misc->expi_clk_cfg, EXPI_CLK_CFG_RST);
+
+ return 0;
+}
+
+/*
+ * Initialize the fpga
+ */
+int x600_init_fpga(void)
+{
+ struct ssp_regs *ssp = (struct ssp_regs *)CONFIG_SSP2_BASE;
+ struct misc_regs *misc = (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+
+ /* Enable SSP2 clock */
+ writel(readl(&misc->periph1_clken) | MISC_SSP2ENB | MISC_GPIO4ENB,
+ &misc->periph1_clken);
+
+ /* Set EXPI clock to 45 MHz */
+ expi_setup(45000);
+
+ /* Configure GPIO directions */
+ gpio_direction_output(CONFIG_SYS_FPGA_PROG, 0);
+ gpio_direction_input(CONFIG_SYS_FPGA_DONE);
+
+ writel(SSPCR0_DSS_16BITS, &ssp->sspcr0);
+ writel(SSPCR1_SSE, &ssp->sspcr1);
+
+ /*
+ * Set lowest prescale divisor value (CPSDVSR) of 2 for max download
+ * speed.
+ *
+ * Actual data clock rate is: 80MHz / (CPSDVSR * (SCR + 1))
+ * With CPSDVSR at 2 and SCR at 0, the maximume clock rate is 40MHz.
+ */
+ writel(2, &ssp->sspcpsr);
+
+ fpga_init();
+ fpga_serialslave_init();
+
+ debug("%s:%d: Adding fpga 0\n", __func__, __LINE__);
+ fpga_add(fpga_xilinx, &fpga[0]);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+int x600_init_fpga(void);
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, ST Micoelectronics, vipin.kumar@st.com.
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <netdev.h>
+#include <phy.h>
+#include <rtc.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/spr_defs.h>
+#include <asm/arch/spr_misc.h>
+#include <linux/mtd/fsmc_nand.h>
+#include "fpga.h"
+
+static struct nand_chip nand_chip[CONFIG_SYS_MAX_NAND_DEVICE];
+
+int board_init(void)
+{
+ /*
+ * X600 is equipped with an M41T82 RTC. This RTC has the
+ * HT bit (Halt Update), which needs to be cleared upon
+ * power-up. Otherwise the RTC is halted.
+ */
+ rtc_reset();
+
+ return spear_board_init(MACH_TYPE_SPEAR600);
+}
+
+int board_late_init(void)
+{
+ /*
+ * Monitor and env protection on by default
+ */
+ flash_protect(FLAG_PROTECT_SET,
+ CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE +
+ CONFIG_SYS_SPL_LEN + CONFIG_SYS_MONITOR_LEN +
+ 2 * CONFIG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+
+ /* Init FPGA subsystem */
+ x600_init_fpga();
+
+ return 0;
+}
+
+/*
+ * board_nand_init - Board specific NAND initialization
+ * @nand: mtd private chip structure
+ *
+ * Called by nand_init_chip to initialize the board specific functions
+ */
+
+void board_nand_init(void)
+{
+ struct misc_regs *const misc_regs_p =
+ (struct misc_regs *)CONFIG_SPEAR_MISCBASE;
+ struct nand_chip *nand = &nand_chip[0];
+
+ if (!(readl(&misc_regs_p->auto_cfg_reg) & MISC_NANDDIS))
+ fsmc_nand_init(nand);
+}
+
+int designware_board_phy_init(struct eth_device *dev, int phy_addr,
+ int (*mii_write)(struct eth_device *, u8, u8, u16),
+ int dw_reset_phy(struct eth_device *))
+{
+ /* Extended PHY control 1, select GMII */
+ mii_write(dev, phy_addr, 23, 0x0020);
+
+ /* Software reset necessary after GMII mode selction */
+ dw_reset_phy(dev);
+
+ /* Enable extended page register access */
+ mii_write(dev, phy_addr, 31, 0x0001);
+
+ /* 17e: Enhanced LED behavior, needs to be written twice */
+ mii_write(dev, phy_addr, 17, 0x09ff);
+ mii_write(dev, phy_addr, 17, 0x09ff);
+
+ /* 16e: Enhanced LED method select */
+ mii_write(dev, phy_addr, 16, 0xe0ea);
+
+ /* Disable extended page register access */
+ mii_write(dev, phy_addr, 31, 0x0000);
+
+ /* Enable clock output pin */
+ mii_write(dev, phy_addr, 18, 0x0049);
+
+ return 0;
+}
+
+int board_eth_init(bd_t *bis)
+{
+ int ret = 0;
+
+ if (designware_initialize(0, CONFIG_SPEAR_ETHBASE, CONFIG_PHY_ADDR,
+ PHY_INTERFACE_MODE_GMII) >= 0)
+ ret++;
+
+ return ret;
+}
if ((raise_ab8500_gpio16() < 0))
printf("error: cant' raise GPIO16\n");
+ /* empty UART RX FIFO */
+ while (tstc())
+ (void) getc();
+
return 0;
}
}
#endif
-#ifdef CONFIG_USB_EHCI
+#if defined(CONFIG_USB_EHCI) && !defined(CONFIG_SPL_BUILD)
/* Call usb_stop() before starting the kernel */
void show_boot_progress(int val)
{
--- /dev/null
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+ifneq ($(OBJTREE),$(SRCTREE))
+$(shell mkdir -p $(obj)../common)
+endif
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS-y := board.o
+
+COBJS := $(sort $(COBJS-y))
+
+SRCS := $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+clean:
+ rm -f $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak $(obj).depend
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+ icache_enable();
+
+ return 0;
+}
+
+
+#ifdef CONFIG_CMD_NET
+int board_eth_init(bd_t *bis)
+{
+ u32 ret = 0;
+
+#if defined(CONFIG_ZYNQ_GEM) && defined(CONFIG_ZYNQ_GEM_BASEADDR0)
+ ret = zynq_gem_initialize(bis, CONFIG_ZYNQ_GEM_BASEADDR0);
+#endif
+
+ return ret;
+}
+#endif
+
+int dram_init(void)
+{
+ gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+
+ return 0;
+}
scb9328 arm arm920t - - imx
cm4008 arm arm920t - - ks8695
cm41xx arm arm920t - - ks8695
+mini2440 arm arm920t mini2440 friendlyarm s3c24x0
VCMA9 arm arm920t vcma9 mpl s3c24x0
smdk2410 arm arm920t - samsung s3c24x0
omap1510inn arm arm925t - ti
calimain arm arm926ejs calimain omicron davinci
pogo_e02 arm arm926ejs - cloudengines kirkwood
dns325 arm arm926ejs - d-link kirkwood
+iconnect arm arm926ejs - iomega kirkwood
lschlv2 arm arm926ejs lsxl buffalo kirkwood lsxl:LSCHLV2
lsxhl arm arm926ejs lsxl buffalo kirkwood lsxl:LSXHL
km_kirkwood arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_KIRKWOOD
mgcoge3un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_MGCOGE3UN
kmcoge5un arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_COGE5UN
portl2 arm arm926ejs km_arm keymile kirkwood km_kirkwood:KM_PORTL2
+d2net_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:D2NET_V2
inetspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:INETSPACE_V2
net2big_v2 arm arm926ejs net2big_v2 LaCie kirkwood lacie_kw:NET2BIG_V2
+netspace_lite_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_LITE_V2
netspace_max_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MAX_V2
+netspace_mini_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_MINI_V2
netspace_v2 arm arm926ejs netspace_v2 LaCie kirkwood lacie_kw:NETSPACE_V2
dreamplug arm arm926ejs - Marvell kirkwood
guruplug arm arm926ejs - Marvell kirkwood
spear600_nand arm arm926ejs spear600 spear spear spear6xx_evb:spear600,nand
spear600_usbtty arm arm926ejs spear600 spear spear spear6xx_evb:spear600,usbtty
spear600_usbtty_nand arm arm926ejs spear600 spear spear spear6xx_evb:spear600,usbtty,nand
+x600 arm arm926ejs - spear spear x600
versatileab arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_AB
versatilepb arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_PB
versatileqemu arm arm926ejs versatile armltd versatile versatile:ARCH_VERSATILE_QEMU,ARCH_VERSATILE_PB
whistler arm armv7:arm720t whistler nvidia tegra20
u8500_href arm armv7 u8500 st-ericsson u8500
snowball arm armv7 snowball st-ericsson u8500
+kzm9g arm armv7 kzm9g kmc rmobile
+armadillo-800eva arm armv7 armadillo-800eva atmark-techno rmobile
+zynq arm armv7 zynq xilinx zynq
+socfpga_cyclone5 arm armv7 socfpga_cyclone5 altera socfpga
actux1_4_16 arm ixp actux1 - - actux1:FLASH2X2
actux1_4_32 arm ixp actux1 - - actux1:FLASH2X2,RAM_32MB
actux1_8_16 arm ixp actux1 - - actux1:FLASH1X8
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += xyzModem.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += cmd_nvedit.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_common.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
endif
COBJS-y += console.o
COBJS-y += dlmalloc.o
return env_id;
}
+#ifndef CONFIG_SPL_BUILD
/*
* Command interface: print one or all environment variables
*
return rcode;
}
#endif
+#endif /* CONFIG_SPL_BUILD */
/*
* Perform consistency checking before setting, replacing, or deleting an
return setenv(varname, str);
}
+#ifndef CONFIG_SPL_BUILD
int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
if (argc < 2)
return setenv(argv[1], buffer);
}
#endif /* CONFIG_CMD_EDITENV */
+#endif /* CONFIG_SPL_BUILD */
/*
* Look up variable from environment,
return str ? simple_strtoul(str, NULL, base) : default_val;
}
+#ifndef CONFIG_SPL_BUILD
#if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
""
);
#endif
+#endif /* CONFIG_SPL_BUILD */
/*
return -1;
}
+#ifndef CONFIG_SPL_BUILD
static int do_env_default(cmd_tbl_t *cmdtp, int __flag,
int argc, char * const argv[])
{
var_complete
);
#endif
+#endif /* CONFIG_SPL_BUILD */
nvars, vars, 1 /* do_apply */);
}
+#ifndef CONFIG_SPL_BUILD
/*
* Check if CRC is valid and (if yes) import the environment.
* Note that "buf" may or may not be aligned.
return 0;
}
+#endif
void env_relocate(void)
{
env_reloc();
#endif
if (gd->env_valid == 0) {
-#if defined(CONFIG_ENV_IS_NOWHERE) /* Environment not changable */
+#if defined(CONFIG_ENV_IS_NOWHERE) || defined(CONFIG_SPL_BUILD)
+ /* Environment not changable */
set_default_env(NULL);
#else
bootstage_error(BOOTSTAGE_ID_NET_CHECKSUM);
}
}
-#ifdef CONFIG_AUTO_COMPLETE
+#if defined(CONFIG_AUTO_COMPLETE) && !defined(CONFIG_SPL_BUILD)
int env_complete(char *var, int maxv, char *cmdv[], int bufsz, char *buf)
{
ENTRY *match;
serial_register(&uartlite_serial3_device);
# endif /* XILINX_UARTLITE_BASEADDR3 */
#endif /* CONFIG_XILINX_UARTLITE */
+#if defined(CONFIG_ZYNQ_SERIAL)
+# ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
+ serial_register(&uart_zynq_serial0_device);
+# endif
+# ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
+ serial_register(&uart_zynq_serial1_device);
+# endif
+#endif
serial_assign(default_serial_console()->name);
}
COBJS-$(CONFIG_SPL_NOR_SUPPORT) += spl_nor.o
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += spl_ymodem.o
COBJS-$(CONFIG_SPL_NAND_SUPPORT) += spl_nand.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += spl_net.o
endif
COBJS := $(sort $(COBJS-y))
CONFIG_SYS_SPL_MALLOC_SIZE);
#endif
+ timer_init();
+
#ifdef CONFIG_SPL_BOARD_INIT
spl_board_init();
#endif
case BOOT_DEVICE_SPI:
spl_spi_load_image();
break;
+#endif
+#ifdef CONFIG_SPL_ETH_SUPPORT
+ case BOOT_DEVICE_CPGMAC:
+#ifdef CONFIG_SPL_ETH_DEVICE
+ spl_net_load_image(CONFIG_SPL_ETH_DEVICE);
+#else
+ spl_net_load_image(NULL);
+#endif
+ break;
#endif
default:
debug("SPL: Un-supported Boot Device\n");
--- /dev/null
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2012
+ * Ilya Yanok <ilya.yanok@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <spl.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void spl_net_load_image(const char *device)
+{
+ int rv;
+
+ env_init();
+ env_relocate();
+ setenv("autoload", "yes");
+ load_addr = CONFIG_SYS_TEXT_BASE - sizeof(struct image_header);
+ rv = eth_initialize(gd->bd);
+ if (rv == 0) {
+ printf("No Ethernet devices found\n");
+ hang();
+ }
+ if (device)
+ setenv("ethact", device);
+ rv = NetLoop(BOOTP);
+ if (rv < 0) {
+ printf("Problem booting with BOOTP\n");
+ hang();
+ }
+ spl_parse_image_header((struct image_header *)load_addr);
+}
# cc-version
# Usage gcc-ver := $(call cc-version)
cc-version = $(shell $(SHELL) $(SRCTREE)/tools/gcc-version.sh $(CC))
+binutils-version = $(shell $(SHELL) $(SRCTREE)/tools/binutils-version.sh $(AS))
#
# Include the make variables (CC, etc...)
--- /dev/null
+U-Boot for FriendlyARM Mini2440 (s3c2440)
+
+This file contains information for the port of U-Boot to FriendlyARM
+mini2440
+
+All information about the board can be found on :
+http://www.friendlyarm.net/products/mini2440
+
+To build u-boot : ./MAKEALL mini2440
+
+Overview :
+--------
+FriendlyARM Mini 2440 SBC (Single-Board Computer) with 400 MHz Samsung S3C2440
+ARM9 processor. The board measures 100 x 100 mm, ideal for learning about ARM9
+systems. It's a low cost board.
+
+Boot Methods :
+------------
+Mini2440 can boot from NOR or NAND.
+
+Build :
+-----
+./MAKEALL mini2440
+
+or
+
+make mini2440_config
+make
--- /dev/null
+Summary
+=======
+
+This README is about U-Boot support for Renesas's ARM Cortex-A9 based RMOBILE[1]
+family of SoCs. Renesas's RMOBILE SoC family contains an ARM Cortex-A9.
+
+Currently the following boards are supported:
+
+* KMC KZM-A9-GT [2]
+
+* Atmark-Techno Armadillo-800-EVA [3]
+
+Toolchain
+=========
+
+ARM Cortex-A9 support ARM v7 instruction set (-march=armv7a).
+But currently we compile with -march=armv5 to allow more compilers to work.
+(For U-Boot code this has no performance impact.)
+Because there was no compiler which is supporting armv7a not much before.
+Currently, ELDK[4], Linaro[5], CodeSourcey[6] and Emdebian[7] supports -march=armv7a
+and you can get.
+
+Build
+=====
+
+* KZM-A9-GT
+
+make kzm9g_config
+make
+
+* Armadillo-800-EVA
+
+make armadillo-800eva_config
+make
+
+Links
+=====
+
+[1] Renesas RMOBILE:
+
+http://am.renesas.com/products/soc/assp/mobile/r_mobile/index.jsp
+
+[2] KZM-A9-GT
+
+http://www.kmckk.co.jp/kzma9-gt/index.html
+
+[3] Armadillo-800-EVA
+
+http://armadillo.atmark-techno.com/armadillo-800-EVA
+
+[4] ELDK
+
+http://www.denx.de/wiki/view/ELDK-5/WebHome#Section_1.6.
+
+[5] Linaro
+
+http://www.linaro.org/downloads/
+
+[6] CodeSourcey
+
+http://www.mentor.com/embedded-software/codesourcery
+
+[7] Emdebian
+
+http://www.emdebian.org/crosstools.html
alias kirkwood uboot, prafulla
alias omap ti
alias pxa uboot, marex
+alias rmobile uboot, iwamatsu
alias s3c samsung
alias s5pc samsung
alias samsung uboot, prom
COBJS-$(CONFIG_OMAP_GPIO) += omap_gpio.o
COBJS-$(CONFIG_DB8500_GPIO) += db8500_gpio.o
COBJS-$(CONFIG_BCM2835_GPIO) += bcm2835_gpio.o
+COBJS-$(CONFIG_S3C2440_GPIO) += s3c2440_gpio.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+/*
+ * Copyright (C) 2012
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/arch/s3c2440.h>
+#include <asm/gpio.h>
+#include <asm/io.h>
+
+#define GPIO_INPUT 0x0
+#define GPIO_OUTPUT 0x1
+
+/* 0x4 means that we want DAT and not CON register */
+#define GPIO_PORT(x) ((((x) >> 5) & 0x3) + 0x4)
+#define GPIO_BIT(x) ((x) & 0x3f)
+
+/*
+ * It's how we calculate the full port address
+ * We have to get the number of the port + 1 (Port A is at 0x56000001 ...)
+ * We move it at the second digit, and finally we add 0x4 because we want
+ * to modify GPIO DAT and not CON
+ */
+#define GPIO_FULLPORT(x) (S3C24X0_GPIO_BASE | ((GPIO_PORT(gpio) + 1) << 1))
+
+int gpio_set_value(unsigned gpio, int value)
+{
+ unsigned l = readl(GPIO_FULLPORT(gpio));
+ unsigned bit;
+ unsigned port = GPIO_FULLPORT(gpio);
+
+ /*
+ * All GPIO Port have a configuration on
+ * 2 bits excepted the first GPIO (A) which
+ * have only 1 bit of configuration.
+ */
+ if (!GPIO_PORT(gpio))
+ bit = (0x1 << GPIO_BIT(gpio));
+ else
+ bit = (0x3 << GPIO_BIT(gpio));
+
+ if (value)
+ l |= bit;
+ else
+ l &= ~bit;
+
+ return writel(port, l);
+}
+
+int gpio_get_value(unsigned gpio)
+{
+ unsigned l = readl(GPIO_FULLPORT(gpio));
+
+ if (GPIO_PORT(gpio) == 0) /* PORT A */
+ return (l >> GPIO_BIT(gpio)) & 0x1;
+ return (l >> GPIO_BIT(gpio)) & 0x3;
+}
+
+int gpio_request(unsigned gpio, const char *label)
+{
+ return 0;
+}
+
+int gpio_free(unsigned gpio)
+{
+ return 0;
+}
+
+int gpio_direction_input(unsigned gpio)
+{
+ return writel(GPIO_FULLPORT(gpio), GPIO_INPUT << GPIO_BIT(gpio));
+}
+
+int gpio_direction_output(unsigned gpio, int value)
+{
+ writel(GPIO_FULLPORT(gpio), GPIO_OUTPUT << GPIO_BIT(gpio));
+ return gpio_set_value(gpio, value);
+}
#define IRQ_WAIT 1000
-static void irq_wait(struct sh_i2c *base)
-{
- int i;
- u8 status;
-
- for (i = 0 ; i < IRQ_WAIT ; i++) {
- status = readb(&base->icsr);
- if (SH_IC_WAIT & status)
- break;
-
- udelay(10);
- }
-
- writeb(status & ~SH_IC_WAIT, &base->icsr);
-}
-
static void irq_dte(struct sh_i2c *base)
{
int i;
sector_size = host->pmecc_sector_size = CONFIG_PMECC_SECTOR_SIZE;
host->pmecc_index_table_offset = CONFIG_PMECC_INDEX_TABLE_OFFSET;
- printk(KERN_INFO "Initialize PMECC params, cap: %d, sector: %d\n",
- cap, sector_size);
+ MTDDEBUG(MTD_DEBUG_LEVEL1,
+ "Initialize PMECC params, cap: %d, sector: %d\n",
+ cap, sector_size);
host->pmecc = (struct pmecc_regs __iomem *) ATMEL_BASE_PMECC;
host->pmerrloc = (struct pmecc_errloc_regs __iomem *)
.nr_sectors = 32,
.name = "AT45DB642D",
},
+ {
+ .idcode1 = 0x47,
+ .l2_page_size = 8,
+ .pages_per_block = 16,
+ .blocks_per_sector = 16,
+ .nr_sectors = 64,
+ .name = "AT25DF321",
+ },
};
static int at45_wait_ready(struct spi_flash *flash, unsigned long timeout)
asf->flash.erase = dataflash_erase_p2;
}
+ asf->flash.page_size = page_size;
+ asf->flash.sector_size = page_size;
break;
case DF_FAMILY_AT26F:
case DF_FAMILY_AT26DF:
asf->flash.read = spi_flash_cmd_read_fast;
+ asf->flash.write = spi_flash_cmd_write_multi;
+ asf->flash.erase = spi_flash_cmd_erase;
+ asf->flash.page_size = page_size;
+ asf->flash.sector_size = 4096;
+ /* clear SPRL# bit for locked flash */
+ spi_flash_cmd_write_status(&asf->flash, 0);
break;
default:
goto err;
}
- asf->flash.sector_size = page_size;
asf->flash.size = page_size * params->pages_per_block
* params->blocks_per_sector
* params->nr_sectors;
}
#if defined(CONFIG_DRIVER_TI_EMAC_USE_RMII) && \
- defined(CONFIG_MACH_DAVINCI_DA850_EVM)
+ defined(CONFIG_MACH_DAVINCI_DA850_EVM) && \
+ !defined(CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE)
for (i = 0; i < num_phy; i++) {
if (phy[i].is_phy_connected(i))
phy[i].auto_negotiate(i);
COBJS-$(CONFIG_XILINX_UARTLITE) += serial_xuartlite.o
COBJS-$(CONFIG_SANDBOX_SERIAL) += sandbox.o
COBJS-$(CONFIG_SCIF_CONSOLE) += serial_sh.o
+COBJS-$(CONFIG_ZYNQ_SERIAL) += serial_zynq.o
ifndef CONFIG_SPL_BUILD
COBJS-$(CONFIG_USB_TTY) += usbtty.o
--- /dev/null
+/*
+ * Copyright (C) 2012 Michal Simek <monstr@monstr.eu>
+ * Copyright (C) 2011-2012 Xilinx, Inc. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <linux/compiler.h>
+#include <serial.h>
+
+#define ZYNQ_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
+#define ZYNQ_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
+
+#define ZYNQ_UART_CR_TX_EN 0x00000010 /* TX enabled */
+#define ZYNQ_UART_CR_RX_EN 0x00000004 /* RX enabled */
+#define ZYNQ_UART_CR_TXRST 0x00000002 /* TX logic reset */
+#define ZYNQ_UART_CR_RXRST 0x00000001 /* RX logic reset */
+
+#define ZYNQ_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
+
+/* Some clock/baud constants */
+#define ZYNQ_UART_BDIV 15 /* Default/reset BDIV value */
+#define ZYNQ_UART_BASECLK 3125000L /* master / (bdiv + 1) */
+
+struct uart_zynq {
+ u32 control; /* Control Register [8:0] */
+ u32 mode; /* Mode Register [10:0] */
+ u32 reserved1[4];
+ u32 baud_rate_gen; /* Baud Rate Generator [15:0] */
+ u32 reserved2[4];
+ u32 channel_sts; /* Channel Status [11:0] */
+ u32 tx_rx_fifo; /* FIFO [15:0] or [7:0] */
+ u32 baud_rate_divider; /* Baud Rate Divider [7:0] */
+};
+
+static struct uart_zynq *uart_zynq_ports[2] = {
+#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR0
+ [0] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR0,
+#endif
+#ifdef CONFIG_ZYNQ_SERIAL_BASEADDR1
+ [1] = (struct uart_zynq *)CONFIG_ZYNQ_SERIAL_BASEADDR1,
+#endif
+};
+
+struct uart_zynq_params {
+ u32 baudrate;
+ u32 clock;
+};
+
+static struct uart_zynq_params uart_zynq_ports_param[2] = {
+#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE0) && defined(CONFIG_ZYNQ_SERIAL_CLOCK0)
+ [0].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE0,
+ [0].clock = CONFIG_ZYNQ_SERIAL_CLOCK0,
+#endif
+#if defined(CONFIG_ZYNQ_SERIAL_BAUDRATE1) && defined(CONFIG_ZYNQ_SERIAL_CLOCK1)
+ [1].baudrate = CONFIG_ZYNQ_SERIAL_BAUDRATE1,
+ [1].clock = CONFIG_ZYNQ_SERIAL_CLOCK1,
+#endif
+};
+
+/* Set up the baud rate in gd struct */
+static void uart_zynq_serial_setbrg(const int port)
+{
+ /* Calculation results. */
+ unsigned int calc_bauderror, bdiv, bgen;
+ unsigned long calc_baud = 0;
+ unsigned long baud = uart_zynq_ports_param[port].baudrate;
+ unsigned long clock = uart_zynq_ports_param[port].clock;
+ struct uart_zynq *regs = uart_zynq_ports[port];
+
+ /* master clock
+ * Baud rate = ------------------
+ * bgen * (bdiv + 1)
+ *
+ * Find acceptable values for baud generation.
+ */
+ for (bdiv = 4; bdiv < 255; bdiv++) {
+ bgen = clock / (baud * (bdiv + 1));
+ if (bgen < 2 || bgen > 65535)
+ continue;
+
+ calc_baud = clock / (bgen * (bdiv + 1));
+
+ /*
+ * Use first calculated baudrate with
+ * an acceptable (<3%) error
+ */
+ if (baud > calc_baud)
+ calc_bauderror = baud - calc_baud;
+ else
+ calc_bauderror = calc_baud - baud;
+ if (((calc_bauderror * 100) / baud) < 3)
+ break;
+ }
+
+ writel(bdiv, ®s->baud_rate_divider);
+ writel(bgen, ®s->baud_rate_gen);
+}
+
+/* Initialize the UART, with...some settings. */
+static int uart_zynq_serial_init(const int port)
+{
+ struct uart_zynq *regs = uart_zynq_ports[port];
+
+ if (!regs)
+ return -1;
+
+ /* RX/TX enabled & reset */
+ writel(ZYNQ_UART_CR_TX_EN | ZYNQ_UART_CR_RX_EN | ZYNQ_UART_CR_TXRST | \
+ ZYNQ_UART_CR_RXRST, ®s->control);
+ writel(ZYNQ_UART_MR_PARITY_NONE, ®s->mode); /* 8 bit, no parity */
+ uart_zynq_serial_setbrg(port);
+
+ return 0;
+}
+
+static void uart_zynq_serial_putc(const char c, const int port)
+{
+ struct uart_zynq *regs = uart_zynq_ports[port];
+
+ while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
+ WATCHDOG_RESET();
+
+ if (c == '\n') {
+ writel('\r', ®s->tx_rx_fifo);
+ while ((readl(®s->channel_sts) & ZYNQ_UART_SR_TXFULL) != 0)
+ WATCHDOG_RESET();
+ }
+ writel(c, ®s->tx_rx_fifo);
+}
+
+static void uart_zynq_serial_puts(const char *s, const int port)
+{
+ while (*s)
+ uart_zynq_serial_putc(*s++, port);
+}
+
+static int uart_zynq_serial_tstc(const int port)
+{
+ struct uart_zynq *regs = uart_zynq_ports[port];
+
+ return (readl(®s->channel_sts) & ZYNQ_UART_SR_RXEMPTY) == 0;
+}
+
+static int uart_zynq_serial_getc(const int port)
+{
+ struct uart_zynq *regs = uart_zynq_ports[port];
+
+ while (!uart_zynq_serial_tstc(port))
+ WATCHDOG_RESET();
+ return readl(®s->tx_rx_fifo);
+}
+
+#if !defined(CONFIG_SERIAL_MULTI)
+int serial_init(void)
+{
+ return uart_zynq_serial_init(0);
+}
+
+void serial_setbrg(void)
+{
+ uart_zynq_serial_setbrg(0);
+}
+
+void serial_putc(const char c)
+{
+ uart_zynq_serial_putc(c, 0);
+}
+
+void serial_puts(const char *s)
+{
+ uart_zynq_serial_puts(s, 0);
+}
+
+int serial_getc(void)
+{
+ return uart_zynq_serial_getc(0);
+}
+
+int serial_tstc(void)
+{
+ return uart_zynq_serial_tstc(0);
+}
+#else
+/* Multi serial device functions */
+#define DECLARE_PSSERIAL_FUNCTIONS(port) \
+ int uart_zynq##port##_init(void) \
+ { return uart_zynq_serial_init(port); } \
+ void uart_zynq##port##_setbrg(void) \
+ { return uart_zynq_serial_setbrg(port); } \
+ int uart_zynq##port##_getc(void) \
+ { return uart_zynq_serial_getc(port); } \
+ int uart_zynq##port##_tstc(void) \
+ { return uart_zynq_serial_tstc(port); } \
+ void uart_zynq##port##_putc(const char c) \
+ { uart_zynq_serial_putc(c, port); } \
+ void uart_zynq##port##_puts(const char *s) \
+ { uart_zynq_serial_puts(s, port); }
+
+/* Serial device descriptor */
+#define INIT_PSSERIAL_STRUCTURE(port, __name) { \
+ .name = __name, \
+ .init = uart_zynq##port##_init, \
+ .uninit = NULL, \
+ .setbrg = uart_zynq##port##_setbrg, \
+ .getc = uart_zynq##port##_getc, \
+ .tstc = uart_zynq##port##_tstc, \
+ .putc = uart_zynq##port##_putc, \
+ .puts = uart_zynq##port##_puts, \
+}
+
+DECLARE_PSSERIAL_FUNCTIONS(0);
+struct serial_device uart_zynq_serial0_device =
+ INIT_PSSERIAL_STRUCTURE(0, "ttyPS0");
+DECLARE_PSSERIAL_FUNCTIONS(1);
+struct serial_device uart_zynq_serial1_device =
+ INIT_PSSERIAL_STRUCTURE(1, "ttyPS1");
+
+__weak struct serial_device *default_serial_console(void)
+{
+ if (uart_zynq_ports[0])
+ return &uart_zynq_serial0_device;
+ if (uart_zynq_ports[1])
+ return &uart_zynq_serial1_device;
+
+ return NULL;
+}
+#endif
* CONFIG_CONSOLE_TIME - display time/date in upper right
* corner, needs CONFIG_CMD_DATE and
* CONFIG_CONSOLE_CURSOR
- * CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner
+ * CONFIG_VIDEO_LOGO - display Linux Logo in upper left corner.
+ * Use CONFIG_SPLASH_SCREEN_ALIGN with
+ * environment variable "splashpos" to place
+ * the logo on other position. In this case
+ * no CONSOLE_EXTRA_INFO is possible.
* CONFIG_VIDEO_BMP_LOGO - use bmp_logo instead of linux_logo
* CONFIG_CONSOLE_EXTRA_INFO - display additional board information
* strings that normaly goes to serial
#ifdef CONFIG_VIDEO_LOGO
-void logo_plot(void *screen, int width, int x, int y)
+static int video_logo_xpos;
+static int video_logo_ypos;
+
+static void plot_logo_or_black(void *screen, int width, int x, int y, \
+ int black);
+
+static void logo_plot(void *screen, int width, int x, int y)
+{
+ plot_logo_or_black(screen, width, x, y, 0);
+}
+
+static void logo_black(void)
+{
+ plot_logo_or_black(video_fb_address, \
+ VIDEO_COLS, \
+ video_logo_xpos, \
+ video_logo_ypos, \
+ 1);
+}
+
+static int do_clrlogo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ if (argc != 1)
+ return cmd_usage(cmdtp);
+
+ logo_black();
+ return 0;
+}
+
+U_BOOT_CMD(
+ clrlogo, 1, 0, do_clrlogo,
+ "fill the boot logo area with black",
+ " "
+ );
+
+static void plot_logo_or_black(void *screen, int width, int x, int y, int black)
{
int xcount, i;
int ycount = video_logo_height;
unsigned char r, g, b, *logo_red, *logo_blue, *logo_green;
unsigned char *source;
- unsigned char *dest = (unsigned char *) screen +
- ((y * width * VIDEO_PIXEL_SIZE) + x * VIDEO_PIXEL_SIZE);
+ unsigned char *dest;
+
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ if (x == BMP_ALIGN_CENTER)
+ x = max(0, (VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH) / 2);
+ else if (x < 0)
+ x = max(0, VIDEO_VISIBLE_COLS - VIDEO_LOGO_WIDTH + x + 1);
+
+ if (y == BMP_ALIGN_CENTER)
+ y = max(0, (VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT) / 2);
+ else if (y < 0)
+ y = max(0, VIDEO_VISIBLE_ROWS - VIDEO_LOGO_HEIGHT + y + 1);
+#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
+
+ dest = (unsigned char *)screen + (y * width + x) * VIDEO_PIXEL_SIZE;
#ifdef CONFIG_VIDEO_BMP_LOGO
source = bmp_logo_bitmap;
#endif
xcount = VIDEO_LOGO_WIDTH;
while (xcount--) {
- r = logo_red[*source - VIDEO_LOGO_LUT_OFFSET];
- g = logo_green[*source - VIDEO_LOGO_LUT_OFFSET];
- b = logo_blue[*source - VIDEO_LOGO_LUT_OFFSET];
+ if (black) {
+ r = 0x00;
+ g = 0x00;
+ b = 0x00;
+ } else {
+ r = logo_red[*source - VIDEO_LOGO_LUT_OFFSET];
+ g = logo_green[*source - VIDEO_LOGO_LUT_OFFSET];
+ b = logo_blue[*source - VIDEO_LOGO_LUT_OFFSET];
+ }
switch (VIDEO_DATA_FORMAT) {
case GDF__8BIT_INDEX:
char info[128];
int space, len;
__maybe_unused int y_off = 0;
+ __maybe_unused ulong addr;
+ __maybe_unused char *s;
-#ifdef CONFIG_SPLASH_SCREEN
- char *s;
- ulong addr;
-
- s = getenv("splashimage");
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ s = getenv("splashpos");
if (s != NULL) {
- int x = 0, y = 0;
+ if (s[0] == 'm')
+ video_logo_xpos = BMP_ALIGN_CENTER;
+ else
+ video_logo_xpos = simple_strtol(s, NULL, 0);
- addr = simple_strtoul(s, NULL, 16);
-#ifdef CONFIG_SPLASH_SCREEN_ALIGN
- s = getenv("splashpos");
+ s = strchr(s + 1, ',');
if (s != NULL) {
- if (s[0] == 'm')
- x = BMP_ALIGN_CENTER;
+ if (s[1] == 'm')
+ video_logo_ypos = BMP_ALIGN_CENTER;
else
- x = simple_strtol(s, NULL, 0);
-
- s = strchr(s + 1, ',');
- if (s != NULL) {
- if (s[1] == 'm')
- y = BMP_ALIGN_CENTER;
- else
- y = simple_strtol(s + 1, NULL, 0);
- }
+ video_logo_ypos = simple_strtol(s + 1, NULL, 0);
}
+ }
#endif /* CONFIG_SPLASH_SCREEN_ALIGN */
- if (video_display_bitmap(addr, x, y) == 0) {
+#ifdef CONFIG_SPLASH_SCREEN
+ s = getenv("splashimage");
+ if (s != NULL) {
+
+ addr = simple_strtoul(s, NULL, 16);
+
+
+ if (video_display_bitmap(addr,
+ video_logo_xpos,
+ video_logo_ypos) == 0) {
video_logo_height = 0;
return ((void *) (video_fb_address));
}
}
#endif /* CONFIG_SPLASH_SCREEN */
- logo_plot(video_fb_address, VIDEO_COLS, 0, 0);
+ logo_plot(video_fb_address, VIDEO_COLS,
+ video_logo_xpos, video_logo_ypos);
+
+#ifdef CONFIG_SPLASH_SCREEN_ALIGN
+ /*
+ * when using splashpos for video_logo, skip any info
+ * output on video console if the logo is not at 0,0
+ */
+ if (video_logo_xpos || video_logo_ypos) {
+ /*
+ * video_logo_height is used in text and cursor offset
+ * calculations. Since the console is below the logo,
+ * we need to adjust the logo height
+ */
+ if (video_logo_ypos == BMP_ALIGN_CENTER)
+ video_logo_height += max(0, (VIDEO_VISIBLE_ROWS - \
+ VIDEO_LOGO_HEIGHT) / 2);
+ else if (video_logo_ypos > 0)
+ video_logo_height += video_logo_ypos;
+
+ return video_fb_address + video_logo_height * VIDEO_LINE_LEN;
+ }
+#endif
sprintf(info, " %s", version_string);
#include "videomodes.h"
#include "ipu.h"
#include "mxcfb.h"
+#include "ipu_regs.h"
static int mxcfb_map_video_memory(struct fb_info *fbi);
static int mxcfb_unmap_video_memory(struct fb_info *fbi);
return ret;
}
+void ipuv3_fb_shutdown(void)
+{
+ int i;
+ struct ipu_stat *stat = (struct ipu_stat *)IPU_STAT;
+
+ for (i = 0; i < ARRAY_SIZE(mxcfb_info); i++) {
+ struct fb_info *fbi = mxcfb_info[i];
+ if (fbi) {
+ struct mxcfb_info *mxc_fbi = fbi->par;
+ ipu_disable_channel(mxc_fbi->ipu_ch);
+ ipu_uninit_channel(mxc_fbi->ipu_ch);
+ }
+ }
+ for (i = 0; i < ARRAY_SIZE(stat->int_stat); i++) {
+ __raw_writel(__raw_readl(&stat->int_stat[i]),
+ &stat->int_stat[i]);
+ }
+}
+
void *video_hw_init(void)
{
int ret;
*/
ulong timer_get_boot_us(void);
+#ifndef CONFIG_SPL_BUILD
/*
* Board code can implement show_boot_progress() if needed.
*
* has occurred.
*/
void show_boot_progress(int val);
+#else
+#define show_boot_progress(val) do {} while (0)
+#endif
-#ifdef CONFIG_BOOTSTAGE
+#if defined(CONFIG_BOOTSTAGE) && !defined(CONFIG_SPL_BUILD)
/* This is the full bootstage implementation */
/*
--- /dev/null
+/*
+ * (C) Copyright 2012
+ * Ilya Yanok, ilya.yanok@gmail.com
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ *
+ * We don't use any commands in SPL, but generic networking code
+ * has some features enabled/disabled based on CONFIG_CMD_*
+ * options. As we want a minimal set of features included
+ * into network SPL image, we undefine some config options here.
+ */
+
+#ifndef __CONFIG_UNCMD_SPL_H__
+#define __CONFIG_UNCMD_SPL_H__
+
+#ifdef CONFIG_SPL_BUILD
+/* SPL needs only BOOTP + TFTP so undefine other stuff to save space */
+#undef CONFIG_CMD_CDP
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DNS
+#undef CONFIG_CMD_LINK_LOCAL
+#undef CONFIG_CMD_NFS
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_RARP
+#undef CONFIG_CMD_SNTP
+#undef CONFIG_CMD_TFTPPUT
+#undef CONFIG_CMD_TFTPSRV
+#endif /* CONFIG_SPL_BUILD */
+#endif /* __CONFIG_UNCMD_SPL_H__ */
#define CONFIG_VERSION_VARIABLE
/* set to negative value for no autoboot */
-#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTDELAY 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"loadaddr=0x80200000\0" \
"fdtaddr=0x80F80000\0" \
"console=ttyO0,115200n8\0" \
"optargs=\0" \
"mmcdev=0\0" \
- "mmcroot=/dev/mmcblk0p2 rw\0" \
+ "mmcroot=/dev/mmcblk0p2 ro\0" \
"mmcrootfstype=ext4 rootwait\0" \
"ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \
"ramrootfstype=ext2\0" \
#define CONFIG_SPL
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_TEXT_BASE 0x402F0400
-#define CONFIG_SPL_MAX_SIZE (46 * 1024)
+#define CONFIG_SPL_MAX_SIZE (101 * 1024)
#define CONFIG_SPL_STACK CONFIG_SYS_INIT_SP_ADDR
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_SERIAL_SUPPORT
#define CONFIG_SPL_GPIO_SUPPORT
#define CONFIG_SPL_YMODEM_SUPPORT
+#define CONFIG_SPL_NET_SUPPORT
+#define CONFIG_SPL_NET_VCI_STRING "AM335x U-Boot SPL"
+#define CONFIG_SPL_ETH_SUPPORT
#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
/*
--- /dev/null
+/*
+ * Configuation settings for the bonito board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ARMADILLO_800EVA_H
+#define __ARMADILLO_800EVA_H
+
+#undef DEBUG
+#define CONFIG_ARMV7
+#define CONFIG_R8A7740
+#define CONFIG_RMOBILE
+#define CONFIG_RMOBILE_BOARD_STRING "Armadillo-800EVA Board\n"
+#define CONFIG_SH_GPIO_PFC
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_DFL
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_OF_LIBFDT
+#define BOARD_LATE_INIT
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS ""
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_USE_ARCH_MEMSET
+#define CONFIG_USE_ARCH_MEMCPY
+#define CONFIG_TMU_TIMER
+#define CONFIG_SYS_DCACHE_OFF
+
+/* STACK */
+#define CONFIG_SYS_INIT_SP_ADDR 0xE8083000
+#define STACK_AREA_SIZE 0xC000
+#define LOW_LEVEL_MERAM_STACK \
+ (CONFIG_SYS_INIT_SP_ADDR + STACK_AREA_SIZE - 4)
+
+/* MEMORY */
+#define ARMADILLO_800EVA_SDRAM_BASE 0x40000000
+#define ARMADILLO_800EVA_SDRAM_SIZE (512 * 1024 * 1024)
+
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "=> "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF1
+#define SCIF0_BASE 0xe6c40000
+#define SCIF1_BASE 0xe6c50000
+#define SCIF2_BASE 0xe6c60000
+#define SCIF4_BASE 0xe6c80000
+#define CONFIG_SCIF_A
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (ARMADILLO_800EVA_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
+ 504 * 1024 * 1024)
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE)
+#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
+ 64 * 1024 * 1024)
+#define CONFIG_NR_DRAM_BANKS 1
+
+#define CONFIG_SYS_MONITOR_BASE 0x00000000
+#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
+#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+#define CONFIG_SYS_TEXT_BASE 0xE80C0000
+
+/* FLASH */
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_FLASH_BASE 0x00000000
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANKS_LIST { (CONFIG_SYS_FLASH_BASE) }
+
+#define CONFIG_SYS_FLASH_ERASE_TOUT 3000
+#define CONFIG_SYS_FLASH_WRITE_TOUT 3000
+#define CONFIG_SYS_FLASH_LOCK_TOUT 3000
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT 3000
+
+/* ENV setting */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_OVERWRITE 1
+#define CONFIG_ENV_SECT_SIZE (128 * 1024)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR)
+#define CONFIG_ENV_SIZE (CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SECT_SIZE)
+
+/* SH Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_SH_ETHER
+#define CONFIG_SH_ETHER_USE_PORT 0
+#define CONFIG_SH_ETHER_PHY_ADDR 0x0
+#define CONFIG_SH_ETHER_BASE_ADDR 0xe9a00000
+#define CONFIG_SH_ETHER_SH7734_MII (0x01)
+#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_SMSC
+#define CONFIG_BITBANGMII
+#define CONFIG_BITBANGMII_MULTI
+
+/* Board Clock */
+#define CONFIG_SYS_CLK_FREQ 50000000
+#define CONFIG_SYS_TMU_CLK_DIV 4
+#define CONFIG_SYS_HZ 1000
+
+#endif /* __ARMADILLO_800EVA_H */
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_OF_LIBFDT
+
#define CONFIG_ATMEL_LEGACY
#define CONFIG_SYS_TEXT_BASE 0x21f00000
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_OF_LIBFDT
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_OF_LIBFDT
+
/* general purpose I/O */
#define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */
#define CONFIG_AT91_GPIO
"run commonargs; " \
"setenv bootargs ${bootargs} " \
"root=/dev/mmcblk0p2 " \
+ "rootwait " \
"${kernelopts}\0" \
"nandargs=" \
"run commonargs; " \
#define CONFIG_USE_SPIFLASH
#define CONFIG_SYS_USE_NAND
#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_VIDEO
* Network & Ethernet Configuration
*/
#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONFIG_EMAC_MDIO_PHY_NUM 0
#define CONFIG_MII
#define CONFIG_BOOTP_DEFAULT
#define CONFIG_BOOTP_DNS
#define CONFIG_VIDEO_DA8XX
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
-#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_LOGO
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_CMD_BMP
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#endif
/*
#define CONFIG_NAND_DAVINCI
#define CONFIG_SYS_NAND_PAGE_2K
+#define CONFIG_SYS_NAND_NO_SUBPAGE
#define CONFIG_SYS_NAND_CS 2
#define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE
#undef CONFIG_SYS_NAND_HW_ECC
#define xstr(s) str(s)
#define str(s) #s
-
#define CONFIG_HOSTNAME ea20
-#define CONFIG_EXTRA_ENV_SETTINGS \
+#define CONFIG_EXTRA_ENV_SETTINGS \
"as=3\0" \
- "netdev=eth0\0" \
+ "netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rootpath}\0" \
"rfsbargs=setenv bootargs root=/dev/nfs rw " \
"nfsroot=${serverip}:${rfsbpath}\0" \
- "ramargs=setenv bootargs root=/dev/ram rw\0" \
- "mtdids=nand0=davinci_nand.0\0" \
- "mtdparts=mtdparts=davinci_nand.0:8m(Settings),8m(aKernel)," \
- "8m(bKernel),76m(aRootfs),76m(bRootfs),-(MassSD)\0" \
+ "testrfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${testrfspath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw initrd=" \
+ "0x${ramdisk_addr_r},4M\0" \
+ "mtdids=nand0=davinci_nand.0\0" \
+ "serverip=192.168.5.249\0" \
+ "ipaddr=192.168.5.248\0" \
+ "rootpath=/opt/eldk/arm\0" \
+ "splashpos=230,180\0" \
+ "testrfspath=/opt/eldk/test_arm\0" \
+ "tempmac=setenv ethaddr 02:ea:20:ff:ff:ff\0" \
"nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \
"ubi.mtd=${as} root=ubi0:rootfs\0" \
+ "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \
+ "ubi.mtd=${as} root=ubi0:rootfs\0" \
"addip_sta=setenv bootargs ${bootargs} " \
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
":${hostname}:${netdev}:off panic=1\0" \
"addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
- "addip=if test -n ${ipdyn};then run addip_dyn;" \
+ "addip=if test -n ${ipdyn};then run addip_dyn;" \
"else run addip_sta;fi\0" \
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
"addtty=setenv bootargs ${bootargs}" \
" console=${consoledev},${baudrate}n8\0" \
- "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
+ "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
"addmem=setenv bootargs ${bootargs} mem=${memory}\0" \
"consoledev=ttyS0\0" \
"loadaddr=c0000014\0" \
"kernel_addr_r=c0700000\0" \
"hostname=" xstr(CONFIG_HOSTNAME) "\0" \
"bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
- "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/image.ext2\0" \
"flash_self=run ramargs addip addtty addmtd addmisc addmem;" \
- "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "bootm ${kernel_addr_r}\0" \
"flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \
"bootm ${kernel_addr}\0" \
- "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
"run nfsargs addip addtty addmtd addmisc addmem;" \
- "bootm ${kernel_addr_r}\0" \
- "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \
- "run rfsbargs addip addtty addmtd addmisc addmem; " \
- "bootm ${kernel_addr_r}\0" \
+ "bootm ${kernel_addr_r}\0" \
+ "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \
+ "run rfsbargs addip addtty addmtd addmisc addmem; " \
+ "bootm ${kernel_addr_r}\0" \
+ "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "run testrfsargs addip addtty addmtd addmisc addmem; " \
+ "bootm ${kernel_addr_r}\0" \
"net_self_load=tftp ${kernel_addr_r} ${bootfile};" \
"tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \
- "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \
- "ubifsload ${kernel_addr_r} /boot/uImage;" \
- "ubifsumount; run nandargs addip addtty " \
- "addmtd addmisc addmem;bootm ${kernel_addr_r}\0" \
- "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
- "load_magic=if sf probe 0;then sf " \
- "read c0000000 0x10000 0x60000;fi\0" \
- "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \
- "if ubifsload c0000014 /boot/u-boot.bin;" \
- "then mw c0000008 ${filesize};else echo Error reading " \
- "u-boot from nand!;fi\0" \
- "load_net=if sf probe 0;then sf read c0000000 0x10000 0x60000;" \
- "tftp c0000014 ${u-boot};" \
- "mw c0000008 ${filesize};" \
- "fi\0" \
- "upd=if sf probe 0;then sf erase 10000 60000;" \
- "sf write c0000000 10000 60000;" \
- "fi\0" \
- "ubootupd_net=if run load_net;then echo Updating u-boot;" \
- "if run upd; then echo U-Boot updated;" \
+ "nand_nand=ubi part nand0,${as};ubifsmount rootfs;" \
+ "ubifsload ${kernel_addr_r} /boot/uImage;" \
+ "ubifsumount; run nandargs addip addtty " \
+ "addmtd addmisc addmem;clrlogo;" \
+ "bootm ${kernel_addr_r}\0" \
+ "nand_nandrw=ubi part nand0,${as};ubifsmount rootfs;" \
+ "ubifsload ${kernel_addr_r} /boot/uImage;" \
+ "ubifsumount; run nandrwargs addip addtty " \
+ "addmtd addmisc addmem;clrlogo;" \
+ "bootm ${kernel_addr_r}\0" \
+ "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \
+ " addip addtty addmtd addmisc addmem;" \
+ "clrlogo;bootm ${kernel_addr_r}\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin\0" \
+ "load_magic=if sf probe 0;then sf " \
+ "read c0000000 0x10000 0x60000;fi\0" \
+ "load_nand=ubi part nand0,${as};ubifsmount rootfs;" \
+ "if ubifsload c0000014 /boot/u-boot.bin;" \
+ "then mw c0000008 ${filesize};else echo Error reading" \
+ " u-boot from nand!;fi\0" \
+ "load_net=if sf probe 0;then sf read c0000000 0x10000 " \
+ "0x60000;tftp c0000014 ${u-boot};" \
+ "mw c0000008 ${filesize};fi\0" \
+ "upd=if sf probe 0;then sf erase 10000 60000;" \
+ "sf write c0000000 10000 60000;fi\0" \
+ "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \
+ "sf erase 0 10000;" \
+ "sf write 0xc0700000 0 ${filesize};fi\0" \
+ "ubootupd_net=if run load_net;then echo Updating u-boot;" \
+ "if run upd; then echo U-Boot updated;" \
"else echo Error updating u-boot !;" \
"echo Board without bootloader !!;" \
"fi;" \
- "else echo U-Boot not downloaded..exiting;fi\0" \
- "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
- "bootcmd=run net_nfs\0"
+ "else echo U-Boot not downloaded..exiting;fi\0" \
+ "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \
+ "bootcmd=run tempmac;run net_testrfs\0"
#endif /* __CONFIG_H */
/*
* Size of malloc() pool
*/
-#define CONFIG_SYS_MALLOC_LEN (1024 * 128) /* 128kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN (1024 * 256) /* 256kB for malloc() */
/*
* Other required minimal configurations
--- /dev/null
+/*
+ * (C) Copyright 2009-2012
+ * Wojciech Dubowik <wojciech.dubowik@neratec.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _CONFIG_ICONNECT_H
+#define _CONFIG_ICONNECT_H
+
+/*
+ * Version number information
+ */
+#define CONFIG_IDENT_STRING " Iomega iConnect"
+
+/*
+ * High level configuration options
+ */
+#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
+#define CONFIG_KIRKWOOD /* SOC Family Name */
+#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
+
+/*
+ * Machine type
+ */
+#define CONFIG_MACH_TYPE MACH_TYPE_ICONNECT
+
+/*
+ * Compression configuration
+ */
+#define CONFIG_BZIP2
+#define CONFIG_LZMA
+#define CONFIG_LZO
+
+/*
+ * Commands configuration
+ */
+#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
+#define CONFIG_SYS_MVFS
+#include <config_cmd_default.h>
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_USB
+
+/*
+ * mv-common.h should be defined after CMD configs since it used them
+ * to enable certain macros
+ */
+#include "mv-common.h"
+
+#undef CONFIG_SYS_PROMPT
+#define CONFIG_SYS_PROMPT "iconnect => "
+
+/*
+ * Environment variables configuration
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#else
+#define CONFIG_ENV_IS_NOWHERE
+#endif
+#define CONFIG_ENV_SIZE 0x20000
+#define CONFIG_ENV_OFFSET 0x80000
+
+/*
+ * Default environment variables
+ */
+#define CONFIG_BOOTCOMMAND \
+ "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
+ "ubi part rootfs; " \
+ "ubifsmount rootfs; " \
+ "ubifsload 0x800000 ${kernel}; " \
+ "bootm 0x800000"
+
+#define CONFIG_MTDPARTS \
+ "mtdparts=orion_nand:" \
+ "0x80000@0x0(uboot)," \
+ "0x20000@0x80000(uboot_env)," \
+ "-@0xa0000(rootfs)\0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console=console=ttyS0,115200\0" \
+ "mtdids=nand0=orion_nand\0" \
+ "mtdparts="CONFIG_MTDPARTS \
+ "kernel=/boot/uImage\0" \
+ "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
+
+/*
+ * Ethernet driver configuration
+ */
+#ifdef CONFIG_CMD_NET
+#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
+#define CONFIG_PHY_BASE_ADR 11
+#undef CONFIG_RESET_PHY_R
+#endif /* CONFIG_CMD_NET */
+
+/*
+ * File system
+ */
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_RBTREE
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_CMD_MTDPARTS
+
+#endif /* _CONFIG_ICONNECT_H */
#define CONFIG_KM_ENV_IS_IN_SPI_NOR
#define CONFIG_KM_FPGA_CONFIG
#define CONFIG_KM_PIGGY4_88E6352
+#define CONFIG_MV88E6352_SWITCH
+#define CONFIG_KM_MVEXTSW_ADDR 0x10
/* KM_MGCOGE3UN */
#elif defined(CONFIG_KM_MGCOGE3UN)
--- /dev/null
+/*
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __KZM9G_H
+#define __KZM9G_H
+
+#undef DEBUG
+
+#define CONFIG_RMOBILE
+#define CONFIG_SH73A0
+#define CONFIG_KZM_A9_GT
+#define CONFIG_RMOBILE_BOARD_STRING "KMC KZM-A9-GT"
+#define CONFIG_MACH_TYPE MACH_TYPE_KZM9G
+
+#include <asm/arch/rmobile.h>
+
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_L2_OFF
+#define CONFIG_OF_LIBFDT
+
+#include <config_cmd_default.h>
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_BOOTZ
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_BOOTARGS "root=/dev/null console=ttySC4,115200"
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_VERSION_VARIABLE
+#undef CONFIG_SHOW_BOOT_PROGRESS
+
+/* MEMORY */
+#define KZM_SDRAM_BASE (0x40000000)
+#define PHYS_SDRAM KZM_SDRAM_BASE
+#define PHYS_SDRAM_SIZE (512 * 1024 * 1024)
+#define CONFIG_NR_DRAM_BANKS (1)
+
+/* NOR Flash */
+#define KZM_FLASH_BASE (0x00000000)
+#define CONFIG_SYS_FLASH_BASE (KZM_FLASH_BASE)
+#define CONFIG_SYS_FLASH_CFI_WIDTH (FLASH_CFI_16BIT)
+#define CONFIG_SYS_MAX_FLASH_BANKS (1)
+#define CONFIG_SYS_MAX_FLASH_SECT (512)
+
+/* prompt */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "KZM-A9-GT# "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE 512
+#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
+
+/* SCIF */
+#define CONFIG_SCIF_CONSOLE
+#define CONFIG_CONS_SCIF4
+#undef CONFIG_SYS_CONSOLE_INFO_QUIET
+#undef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+#define CONFIG_SYS_MEMTEST_START (KZM_SDRAM_BASE)
+#define CONFIG_SYS_MEMTEST_END \
+ (CONFIG_SYS_MEMTEST_START + (60 * 1024 * 1024))
+#undef CONFIG_SYS_ALT_MEMTEST
+#undef CONFIG_SYS_MEMTEST_SCRATCH
+#undef CONFIG_SYS_LOADS_BAUD_CHANGE
+
+#define CONFIG_SYS_INIT_RAM_ADDR (0xE5600000) /* on MERAM */
+#define CONFIG_SYS_INIT_RAM_SIZE (0x10000)
+#define LOW_LEVEL_MERAM_STACK (CONFIG_SYS_INIT_RAM_ADDR - 4)
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024)
+#define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT)
+#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT)
+#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
+
+#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE)
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
+#define CONFIG_SYS_GBL_DATA_SIZE (256)
+#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
+
+#define CONFIG_SYS_TEXT_BASE 0x00000000
+#define CONFIG_STANDALONE_LOAD_ADDR 0x41000000
+
+/* FLASH */
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#undef CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define FLASH_SECTOR_SIZE (256 * 1024) /* 256 KB sectors */
+#define CONFIG_ENV_SIZE FLASH_SECTOR_SIZE
+#define CONFIG_ENV_OFFSET FLASH_SECTOR_SIZE
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+
+/* Timeout for Flash erase operations (in ms) */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * 1000)
+/* Timeout for Flash write operations (in ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * 1000)
+/* Timeout for Flash set sector lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_LOCK_TOUT (3 * 1000)
+/* Timeout for Flash clear lock bit operations (in ms) */
+#define CONFIG_SYS_FLASH_UNLOCK_TOUT (3 * 1000)
+
+#undef CONFIG_SYS_FLASH_PROTECTION
+#undef CONFIG_SYS_DIRECT_FLASH_TFTP
+#define CONFIG_ENV_IS_IN_FLASH
+
+/* GPIO / PFC */
+#define CONFIG_SH_GPIO_PFC
+
+/* Clock */
+#define CONFIG_GLOBAL_TIMER
+#define CONFIG_SYS_CLK_FREQ (48000000)
+#define CONFIG_SYS_CPU_CLK (1196000000)
+#define TMU_CLK_DIVIDER (4) /* 4 (default), 16, 64, 256 or 1024 */
+#define CFG_HZ (1000)
+#define CONFIG_SYS_HZ CFG_HZ
+
+/* Ether */
+#define CONFIG_NET_MULTI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_BASE (0x10000000)
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_NFS_TIMEOUT 10000UL
+
+/* I2C */
+#define CONFIG_CMD_I2C
+#define CONFIG_SH_I2C 1
+#define CONFIG_HARD_I2C
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_SYS_MAX_I2C_BUS (2)
+#define CONFIG_SYS_I2C_MODULE
+#define CONFIG_SYS_I2C_SPEED (100000) /* 100 kHz */
+#define CONFIG_SYS_I2C_SLAVE (0x7F)
+#define CONFIG_SH_I2C_DATA_HIGH (4)
+#define CONFIG_SH_I2C_DATA_LOW (5)
+#define CONFIG_SH_I2C_CLOCK (41666666)
+#define CONFIG_SH_I2C_BASE0 (0xE6820000)
+#define CONFIG_SH_I2C_BASE1 (0xE6822000)
+
+#endif /* __KZM9G_H */
#elif defined(CONFIG_NETSPACE_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_V2
#define CONFIG_IDENT_STRING " NS v2"
+#elif defined(CONFIG_NETSPACE_LITE_V2)
+#define MACH_TYPE_NETSPACE_LITE_V2 2983 /* missing in mach-types.h */
+#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_LITE_V2
+#define CONFIG_IDENT_STRING " NS v2 Lite"
+#elif defined(CONFIG_NETSPACE_MINI_V2)
+#define MACH_TYPE_NETSPACE_MINI_V2 2831 /* missing in mach-types.h */
+#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MINI_V2
+#define CONFIG_IDENT_STRING " NS v2 Mini"
#elif defined(CONFIG_NETSPACE_MAX_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NETSPACE_MAX_V2
#define CONFIG_IDENT_STRING " NS Max v2"
+#elif defined(CONFIG_D2NET_V2)
+#define CONFIG_MACH_TYPE MACH_TYPE_D2NET_V2
+#define CONFIG_IDENT_STRING " D2 v2"
#elif defined(CONFIG_NET2BIG_V2)
#define CONFIG_MACH_TYPE MACH_TYPE_NET2BIG_V2
#define CONFIG_IDENT_STRING " 2Big v2"
* High Level Configuration Options (easy to change)
*/
#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
-#define CONFIG_KIRKWOOD /* SOC Family Name */
-#define CONFIG_KW88F6281 /* SOC Name */
+#define CONFIG_KIRKWOOD /* SoC Family Name */
+/* SoC name */
+#if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+#define CONFIG_KW88F6192
+#else
+#define CONFIG_KW88F6281
+#endif
#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
/*
#define CONFIG_CMD_SF
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
+#ifndef CONFIG_NETSPACE_MINI_V2 /* No USB ports on Network Space v2 Mini */
#define CONFIG_CMD_USB
+#endif
/*
* Core clock definition
*/
#define CONFIG_NR_DRAM_BANKS 1
-#ifdef CONFIG_INETSPACE_V2
-/* Different SDRAM configuration and size for Internet Space v2 */
+/*
+ * Different SDRAM configuration and size for some of the boards derived
+ * from the Network Space v2
+ */
+#if defined(CONFIG_INETSPACE_V2)
#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-is2.cfg
+#elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
+#define CONFIG_SYS_KWD_CONFIG $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
#endif
/*
#define CONFIG_ENV_SPI_MAX_HZ 20000000 /* 20Mhz */
#define CONFIG_SYS_IDE_MAXBUS 1
#define CONFIG_SYS_IDE_MAXDEVICE 1
-#if defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_D2NET_V2)
+#define CONFIG_SYS_PROMPT "d2v2> "
+#elif defined(CONFIG_NET2BIG_V2)
#define CONFIG_SYS_PROMPT "2big2> "
#else
#define CONFIG_SYS_PROMPT "ns2> "
*/
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
-#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_NET2BIG_V2)
+#if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
+ defined(CONFIG_NET2BIG_V2)
#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
#endif
#endif /* CONFIG_MVSATA_IDE */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
#endif /* CONFIG_CMD_I2C */
+/*
+ * Partition support
+ */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+
/*
* File systems support
*/
--- /dev/null
+/*
+ * (C) Copyright 2002
+ * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Marius Groeger <mgroeger@sysgo.de>
+ * Gary Jennejohn <gj@denx.de>
+ * David Mueller <d.mueller@elsoft.ch>
+ *
+ * (C) Copyright 2009-2010
+ * Michel Pollet <buserror@gmail.com>
+ *
+ * (C) Copyright 2012
+ * Gabriel Huau <contact@huau-gabriel.fr>
+ *
+ * Configuation settings for the MINI2440 board.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_TEXT_BASE 0x0
+#define CONFIG_S3C2440_GPIO
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_ARM920T /* This is an ARM920T Core */
+#define CONFIG_S3C24X0 /* in a SAMSUNG S3C24X0 SoC */
+#define CONFIG_S3C2440 /* in a SAMSUNG S3C2440 SoC */
+#define CONFIG_MINI2440 /* on a MIN2440 Board */
+
+#define MACH_TYPE_MINI2440 1999
+#define CONFIG_MACH_TYPE MACH_TYPE_MINI2440
+
+/*
+ * We don't use lowlevel_init
+ */
+#define CONFIG_SKIP_LOWLEVEL_INIT
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/*
+ * input clock of PLL
+ */
+/* MINI2440 has 12.0000MHz input clock */
+#define CONFIG_SYS_CLK_FREQ 12000000
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2048*1024)
+
+/*
+ * Hardware drivers
+ */
+#define CONFIG_DRIVER_DM9000
+#define CONFIG_DRIVER_DM9000_NO_EEPROM
+#define CONFIG_DM9000_BASE 0x20000300
+#define DM9000_IO CONFIG_DM9000_BASE
+#define DM9000_DATA (CONFIG_DM9000_BASE+4)
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_S3C24X0_SERIAL
+#define CONFIG_SERIAL1
+
+/*
+ * allow to overwrite serial and ethaddr
+ */
+#define CONFIG_ENV_OVERWRITE
+
+/*
+ * Command definition
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PORTIO
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SAVES
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_LONGHELP
+#define CONFIG_SYS_PROMPT "MINI2440 => "
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS 32
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_MEMTEST_START 0x30000000
+#define CONFIG_SYS_MEMTEST_END 0x34000000 /* 64MB in DRAM */
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR 0x32000000
+
+/* boot parameters address */
+#define CONFIG_BOOT_PARAM_ADDR 0x30000100
+
+/*
+ * the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need
+ * it to wrap 100 times (total 1562500) to get 1 sec.
+ */
+#define CONFIG_SYS_HZ 1562500
+
+/*
+ * valid baudrates
+ */
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_BAUDRATE 115200
+
+/*
+ * Stack sizes
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE (128*1024) /* regular stack */
+#ifdef CONFIG_USE_IRQ
+#define CONFIG_STACKSIZE_IRQ (8*1024) /* IRQ stack */
+#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
+#endif
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
+#define PHYS_SDRAM_SIZE (64*1024*1024) /* 64MB of DRAM */
+#define CONFIG_SYS_SDRAM_BASE 0x30000000
+#define CONFIG_SYS_FLASH_BASE 0x0
+
+/*
+ * Stack should be on the SRAM because
+ * DRAM is not init
+ */
+#define CONFIG_SYS_INIT_SP_ADDR (0x40001000 - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * NOR FLASH organization
+ * Now uses the standard CFI interface
+ * FLASH and environment organization
+ */
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
+#define CONFIG_SYS_MONITOR_BASE 0x0
+/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+/* 512 * 4096 sectors, or 32 * 64k blocks */
+#define CONFIG_SYS_MAX_FLASH_SECT 512
+#define CONFIG_FLASH_SHOW_PROGRESS 1
+
+/*
+ * Config for NOR flash
+ */
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_MY_ENV_OFFSET 0x40000
+/* addr of environment */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_MY_ENV_OFFSET)
+/* 16k Total Size of Environment Sector */
+#define CONFIG_ENV_SIZE 0x4000
+
+/* ATAG configuration */
+#define CONFIG_INITRD_TAG
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+#endif /* __CONFIG_H */
#define CONFIG_CMD_NET
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
#define CONFIG_CMD_SF
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
#define CONFIG_OF_LIBFDT
/*
* High Level Configuration Options
*/
-#define CONFIG_PANDA /* working with Panda */
/* USB UHH support options */
#define CONFIG_CMD_USB
--- /dev/null
+/*
+ * Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <asm/arch/socfpga_base_addrs.h>
+
+/*
+ * High level configuration
+ */
+
+#define CONFIG_ARMV7
+#define CONFIG_L2_OFF
+#define CONFIG_SYS_DCACHE_OFF
+#undef CONFIG_USE_IRQ
+
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SINGLE_BOOTLOADER
+#define CONFIG_SOCFPGA
+
+#define CONFIG_SYS_TEXT_BASE 0x08000040
+#define V_NS16550_CLK 1000000
+#define CONFIG_BAUDRATE 57600
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_TIMER_CLOCK_KHZ 2400
+#define CONFIG_SYS_LOAD_ADDR 0x7fc0
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE 256
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT "SOCFPGA_CYCLONE5 # "
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+/*
+ * Display CPU and Board Info
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/*
+ * Enable early stage initialization at C environment
+ */
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* flat device tree */
+#define CONFIG_OF_LIBFDT
+/* skip updating the FDT blob */
+#define CONFIG_FDT_BLOB_SKIP_UPDATE
+/* Initial Memory map size for Linux, minus 4k alignment for DFT blob */
+#define CONFIG_SYS_BOOTMAPSZ ((256*1024*1024) - (4*1024))
+
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_STACK (&__stack_start)
+#define CONFIG_SYS_SPL_MALLOC_START ((unsigned long) (&__malloc_start))
+#define CONFIG_SYS_SPL_MALLOC_SIZE (&__malloc_end - &__malloc_start)
+
+/*
+ * Memory allocation (MALLOC)
+ */
+/* Room required on the stack for the environment data */
+#define CONFIG_ENV_SIZE 1024
+/* Size of DRAM reserved for malloc() use */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
+
+/* SP location before relocation, must use scratch RAM */
+#define CONFIG_SYS_INIT_RAM_ADDR 0xFFFF0000
+/* Reserving 0x100 space at back of scratch RAM for debug info */
+#define CONFIG_SYS_INIT_RAM_SIZE (0x10000 - 0x100)
+/* Stack pointer prior relocation, must situated at on-chip RAM */
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_SYS_NO_FLASH
+#include <config_cmd_default.h>
+/* FAT file system support */
+#define CONFIG_CMD_FAT
+
+
+/*
+ * Misc
+ */
+#define CONFIG_DOS_PARTITION 1
+
+#ifdef CONFIG_SPL_BUILD
+#undef CONFIG_PARTITIONS
+#endif
+
+/*
+ * Environment setup
+ */
+
+/* Delay before automatically booting the default image */
+#define CONFIG_BOOTDELAY 3
+/* Enable auto completion of commands using TAB */
+#define CONFIG_AUTO_COMPLETE
+/* use "hush" command parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_CMD_RUN
+
+#define CONFIG_BOOTCOMMAND "run ramboot"
+
+/*
+ * arguments passed to the bootm command. The value of
+ * CONFIG_BOOTARGS goes into the environment value "bootargs".
+ * Do note the value will overide also the chosen node in FDT blob.
+ */
+#define CONFIG_BOOTARGS "console=ttyS0,57600,mem=256M@0x0"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "verify=n\0" \
+ "loadaddr= " MK_STR(CONFIG_SYS_LOAD_ADDR) "\0" \
+ "ramboot=setenv bootargs " CONFIG_BOOTARGS ";" \
+ "bootm ${loadaddr} - ${fdt_addr}\0" \
+ "bootimage=uImage\0" \
+ "fdt_addr=100\0" \
+ "fsloadcmd=ext2load\0" \
+ "bootm ${loadaddr} - ${fdt_addr}\0" \
+ "qspiroot=/dev/mtdblock0\0" \
+ "qspirootfstype=jffs2\0" \
+ "qspiboot=setenv bootargs " CONFIG_BOOTARGS \
+ " root=${qspiroot} rw rootfstype=${qspirootfstype};"\
+ "bootm ${loadaddr} - ${fdt_addr}\0"
+
+/* using environment setting for stdin, stdout, stderr */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+/* Enable the call to overwrite_console() */
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
+/* Enable overwrite of previous console environment settings */
+#define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
+
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS 16
+
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * SDRAM Memory Map
+ */
+/* We have 1 bank of DRAM */
+#define CONFIG_NR_DRAM_BANKS 1
+/* SDRAM Bank #1 */
+#define CONFIG_SYS_SDRAM_BASE 0x00000000
+/* SDRAM memory size */
+#define PHYS_SDRAM_1_SIZE 0x80000000
+
+#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_START 0x00000000
+#define CONFIG_SYS_MEMTEST_END PHYS_SDRAM_1_SIZE
+
+/*
+ * NS16550 Configuration
+ */
+#define UART0_BASE SOCFPGA_UART0_ADDRESS
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE -4
+#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_SYS_NS16550_COM1 UART0_BASE
+
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600, 115200}
+
+/*
+ * FLASH
+ */
+#define CONFIG_SYS_NO_FLASH
+
+/*
+ * L4 OSC1 Timer 0
+ */
+/* This timer use eosc1 where the clock frequency is fixed
+ * throughout any condition */
+#define CONFIG_SYS_TIMERBASE SOCFPGA_OSC1TIMER0_ADDRESS
+
+/* reload value when timer count to zero */
+#define TIMER_LOAD_VAL 0xFFFFFFFF
+
+#define CONFIG_ENV_IS_NOWHERE
+
+/*
+ * SPL "Second Program Loader" aka Initial Software
+ */
+
+/* Enable building of SPL globally */
+#define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+
+/* TEXT_BASE for linking the SPL binary */
+#define CONFIG_SPL_TEXT_BASE 0xFFFF0000
+
+/* Stack size for SPL */
+#define CONFIG_SPL_STACK_SIZE (4 * 1024)
+
+/* MALLOC size for SPL */
+#define CONFIG_SPL_MALLOC_SIZE (5 * 1024)
+
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_BOARD_INIT
+
+#define CHUNKSZ_CRC32 (1 * 1024)
+
+#define CONFIG_CRC32_VERIFY
+
+/* Linker script for SPL */
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv7/socfpga/u-boot-spl.lds"
+
+/* Support for common/libcommon.o in SPL binary */
+#define CONFIG_SPL_LIBCOMMON_SUPPORT
+/* Support for lib/libgeneric.o in SPL binary */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2009
+ * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
+ *
+ * Copyright (C) 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_SPEAR600 /* SPEAr600 SoC */
+#define CONFIG_X600 /* on X600 board */
+
+#include <asm/arch/hardware.h>
+
+/* Timer, HZ specific defines */
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_HZ_CLOCK 8300000
+
+#define CONFIG_SYS_TEXT_BASE 0x00800040
+#define CONFIG_SYS_FLASH_BASE 0xf8000000
+/* Reserve 8KiB for SPL */
+#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
+#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
+#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
+ CONFIG_SYS_SPL_LEN)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN 0x60000
+
+#define CONFIG_ENV_IS_IN_FLASH
+
+/* Serial Configuration (PL011) */
+#define CONFIG_SYS_SERIAL0 0xD0000000
+#define CONFIG_SYS_SERIAL1 0xD0080000
+#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
+ (void *)CONFIG_SYS_SERIAL1 }
+#define CONFIG_PL011_SERIAL
+#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
+#define CONFIG_CONS_INDEX 0
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
+ 57600, 115200 }
+#define CONFIG_SYS_LOADS_BAUD_CHANGE
+
+/* NOR FLASH config options */
+#define CONFIG_ST_SMI
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
+#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_SECT 128
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
+#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
+
+/* NAND FLASH config options */
+#define CONFIG_NAND_FSMC
+#define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
+#define CONFIG_MTD_ECC_SOFT
+#define CONFIG_SYS_FSMC_NAND_8BIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* UBI/UBI config options */
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_RBTREE
+
+/* Ethernet config options */
+#define CONFIG_MII
+#define CONFIG_DESIGNWARE_ETH
+#define CONFIG_DW_SEARCH_PHY
+#define CONFIG_NET_MULTI
+#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
+#define CONFIG_DW_AUTONEG
+#define CONFIG_PHY_ADDR 0 /* PHY address */
+#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
+
+#define CONFIG_SPEAR_GPIO
+
+/* I2C config options */
+#define CONFIG_HARD_I2C
+#define CONFIG_DW_I2C
+#define CONFIG_SYS_I2C_SPEED 400000
+#define CONFIG_SYS_I2C_SLAVE 0x02
+#define CONFIG_I2C_CHIPADDRESS 0x50
+
+#define CONFIG_RTC_M41T62 1
+#define CONFIG_SYS_I2C_RTC_ADDR 0x68
+
+/* FPGA config options */
+#define CONFIG_FPGA
+#define CONFIG_FPGA_XILINX
+#define CONFIG_FPGA_SPARTAN3
+#define CONFIG_FPGA_COUNT 1
+
+/*
+ * Command support defines
+ */
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_FPGA
+#define CONFIG_CMD_GPIO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_SAVES
+#define CONFIG_CMD_UBI
+#define CONFIG_CMD_UBIFS
+#define CONFIG_LZO
+
+/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <config_cmd_default.h>
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/*
+ * U-Boot Environment placing definitions.
+ */
+#define CONFIG_ENV_SECT_SIZE 0x00010000
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SIZE 0x02000
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
+
+/* Miscellaneous configurable options */
+#define CONFIG_ARCH_CPU_INIT
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_OF_LIBFDT /* enable passing of devicetree */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_MISC_INIT_R
+#define CONFIG_BOARD_LATE_INIT
+#define CONFIG_LOOPW /* enable loopw command */
+#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_AUTOBOOT_KEYED
+#define CONFIG_AUTOBOOT_STOP_STR " "
+#define CONFIG_AUTOBOOT_PROMPT \
+ "Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
+
+#define CONFIG_SYS_MEMTEST_START 0x00800000
+#define CONFIG_SYS_MEMTEST_END 0x04000000
+#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
+#define CONFIG_IDENT_STRING "-SPEAr"
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_SYS_PROMPT "X600> "
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_SYS_LOAD_ADDR 0x00800000
+#define CONFIG_SYS_CONSOLE_INFO_QUIET
+#define CONFIG_SYS_64BIT_VSPRINTF
+
+/* Use last 2 lwords in internal SRAM for bootcounter */
+#define CONFIG_BOOTCOUNT_LIMIT
+#define CONFIG_SYS_BOOTCOUNT_ADDR 0xd2801ff8
+
+#define CONFIG_HOSTNAME x600
+#define CONFIG_UBI_PART ubi0
+#define CONFIG_UBIFS_VOLUME rootfs
+
+#define xstr(s) str(s)
+#define str(s) #s
+
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:64M(ubi0),64M(ubi1)"
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "u-boot_addr=1000000\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.spr\0" \
+ "load=tftp ${u-boot_addr} ${u-boot}\0" \
+ "update=protect off " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};"\
+ "erase " xstr(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
+ "cp.b ${u-boot_addr} " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " ${filesize};" \
+ "protect on " xstr(CONFIG_SYS_MONITOR_BASE) \
+ " +${filesize}\0" \
+ "upd=run load update\0" \
+ "ubifs=" xstr(CONFIG_HOSTNAME) "/ubifs.img\0" \
+ "part=" xstr(CONFIG_UBI_PART) "\0" \
+ "vol=" xstr(CONFIG_UBIFS_VOLUME) "\0" \
+ "load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
+ "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
+ " ${filesize}\0" \
+ "upd_ubifs=run load_ubifs update_ubifs\0" \
+ "init_ubifs=nand erase.part ubi0;ubi part ${part};" \
+ "ubi create ${vol} 4000000\0" \
+ "netdev=eth0\0" \
+ "rootpath=/opt/eldk-4.2/arm\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "boot_part=0\0" \
+ "altbootcmd=if test $boot_part -eq 0;then " \
+ "echo Switching to partition 1!;" \
+ "setenv boot_part 1;" \
+ "else; " \
+ "echo Switching to partition 0!;" \
+ "setenv boot_part 0;" \
+ "fi;" \
+ "saveenv;boot\0" \
+ "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
+ "root=ubi0:rootfs rootfstype=ubifs\0" \
+ "kernel=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "kernel_fs=/boot/uImage \0" \
+ "kernel_addr=1000000\0" \
+ "dtb=" xstr(CONFIG_HOSTNAME) "/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb_fs=/boot/" xstr(CONFIG_HOSTNAME) ".dtb\0" \
+ "dtb_addr=1800000\0" \
+ "load_kernel=tftp ${kernel_addr} ${kernel}\0" \
+ "load_dtb=tftp ${dtb_addr} ${dtb}\0" \
+ "addip=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
+ "${baudrate}\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "net_nfs=run load_dtb load_kernel; " \
+ "run nfsargs addip addcon addmtd addmisc;" \
+ "bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "mtdids=" MTDIDS_DEFAULT "\0" \
+ "mtdparts=" MTDPARTS_DEFAULT "\0" \
+ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
+ " addcon addmisc addmtd;" \
+ "bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "ubifs_mount=ubi part ubi${boot_part};ubifsmount rootfs\0" \
+ "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
+ "ubifsload ${dtb_addr} ${dtb_fs};\0" \
+ "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
+ "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
+ "bootcmd=run nand_ubifs\0" \
+ "\0"
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (512 * 1024)
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 0x00000000
+#define PHYS_SDRAM_1_MAXSIZE 0x40000000
+
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+/*
+ * SPL related defines
+ */
+#define CONFIG_SPL
+#define CONFIG_SPL_TEXT_BASE 0xd2800b00
+#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
+#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds"
+
+#define CONFIG_SPL_SERIAL_SUPPORT
+#define CONFIG_SPL_LIBCOMMON_SUPPORT /* image.c */
+#define CONFIG_SPL_LIBGENERIC_SUPPORT /* string.c */
+#define CONFIG_SPL_NO_PRINTF
+
+/*
+ * Please select/define only one of the following
+ * Each definition corresponds to a supported DDR chip.
+ * DDR configuration is based on the following selection
+ */
+#define CONFIG_DDR_MT47H64M16 1
+#define CONFIG_DDR_MT47H32M16 0
+#define CONFIG_DDR_MT47H128M8 0
+
+/*
+ * Synchronous/Asynchronous operation of DDR
+ *
+ * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
+ * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
+ * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
+ */
+#define CONFIG_DDR_2HCLK 1
+#define CONFIG_DDR_HCLK 0
+#define CONFIG_DDR_PLL2 0
+
+/*
+ * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
+ * or not. Modify/Add to only these macros to define new boot types
+ */
+#define USB_BOOT_SUPPORTED 0
+#define PCIE_BOOT_SUPPORTED 0
+#define SNOR_BOOT_SUPPORTED 1
+#define NAND_BOOT_SUPPORTED 1
+#define PNOR_BOOT_SUPPORTED 0
+#define TFTP_BOOT_SUPPORTED 0
+#define UART_BOOT_SUPPORTED 0
+#define SPI_BOOT_SUPPORTED 0
+#define I2C_BOOT_SUPPORTED 0
+#define MMC_BOOT_SUPPORTED 0
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_ZYNQ_H
+#define __CONFIG_ZYNQ_H
+
+#define CONFIG_ARMV7 /* This is an ARM V7 CPU core */
+#define CONFIG_ZYNQ
+
+/* CPU clock */
+#define CONFIG_CPU_FREQ_HZ 800000000
+#define CONFIG_SYS_HZ 1000
+
+/* Ram */
+#define CONFIG_NR_DRAM_BANKS 1
+#define CONFIG_SYS_TEXT_BASE 0
+#define CONFIG_SYS_SDRAM_BASE 0
+#define CONFIG_SYS_SDRAM_SIZE 0x40000000
+#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
+
+/* The following table includes the supported baudrates */
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
+
+#define CONFIG_BAUDRATE 115200
+
+/* XPSS Serial driver */
+#define CONFIG_SERIAL_MULTI
+#define CONFIG_ZYNQ_SERIAL
+#define CONFIG_ZYNQ_SERIAL_BASEADDR0 0xE0001000
+#define CONFIG_ZYNQ_SERIAL_BAUDRATE0 CONFIG_BAUDRATE
+#define CONFIG_ZYNQ_SERIAL_CLOCK0 50000000
+
+/* SCU timer address is hardcoded */
+#define CONFIG_SCUTIMER_BASEADDR 0xF8F00600
+
+/* Ethernet driver */
+#define CONFIG_NET_MULTI
+#define CONFIG_ZYNQ_GEM
+#define CONFIG_ZYNQ_GEM_BASEADDR0 0xE000B000
+
+#define CONFIG_BOOTP_SERVERIP
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+#define CONFIG_BOOTP_MAY_FAIL
+
+/* MII and Phylib */
+#define CONFIG_MII
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_PHYLIB
+#define CONFIG_PHY_MARVELL
+
+/* Environment */
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_SIZE 0x10000
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_MALLOC_LEN 0x400000
+#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
+#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+#define CONFIG_SYS_PROMPT "U-Boot> "
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_SYS_LOAD_ADDR 0
+#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* OF */
+#define CONFIG_FIT
+#define CONFIG_OF_LIBFDT
+
+/* Commands */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+
+#endif /* __CONFIG_ZYNQ_H */
#define IPU_PIX_FMT_YUV422P fourcc('4', '2', '2', 'P') /*< 16 YUV 4:2:2 */
int ipuv3_fb_init(struct fb_videomode *mode, uint8_t disp, uint32_t pixfmt);
+void ipuv3_fb_shutdown(void);
#endif
extern struct serial_device bfin_serial3_device;
#endif
+#if defined(CONFIG_ZYNQ_SERIAL)
+extern struct serial_device uart_zynq_serial0_device;
+extern struct serial_device uart_zynq_serial1_device;
+#endif
+
extern void serial_register(struct serial_device *);
extern void serial_initialize(void);
extern void serial_stdio_init(void);
};
#endif /* CONFIG_SH3 */
-#if defined(CONFIG_SH4) || defined(CONFIG_SH4A)
+#if defined(CONFIG_SH4) || defined(CONFIG_SH4A) || defined(CONFIG_RMOBILE)
struct tmu_regs {
u32 reserved;
u8 tstr;
/* SPI SPL functions */
void spl_spi_load_image(void);
+/* Ethernet SPL functions */
+void spl_net_load_image(const char *device);
+
#ifdef CONFIG_SPL_BOARD_INIT
void spl_board_init(void);
#endif
COBJS-$(CONFIG_SHA256) += sha256.o
COBJS-y += strmhz.o
COBJS-$(CONFIG_RBTREE) += rbtree.o
-else
-COBJS-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += display_options.o
endif
ifdef CONFIG_SPL_BUILD
COBJS-$(CONFIG_SPL_YMODEM_SUPPORT) += crc16.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += crc32.o
+ifneq ($(CONFIG_SPL_SPI_FLASH_SUPPORT)$(CONFIG_SPL_NET_SUPPORT),)
+COBJS-y += display_options.o
+endif
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += errno.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += hashtable.o
+COBJS-$(CONFIG_SPL_NET_SUPPORT) += net_utils.o
endif
COBJS-y += crc32.o
COBJS-y += ctype.o
* hexport()
*/
+#ifndef CONFIG_SPL_BUILD
/*
* Export the data stored in the hash table in linearized form.
*
return size;
}
+#endif
/*
#include <configs/${CONFIG_NAME}.h>
#include <asm/config.h>
#include <config_fallbacks.h>
+#include <config_uncmd_spl.h>
EOF
exit 0
}
}
+#define put_vci(e, str) \
+ do { \
+ size_t vci_strlen = strlen(str); \
+ *e++ = 60; /* Vendor Class Identifier */ \
+ *e++ = vci_strlen; \
+ memcpy(e, str, vci_strlen); \
+ e += vci_strlen; \
+ } while (0)
+
/*
* Initialize BOOTP extension fields in the request.
*/
u8 *cnt;
#if defined(CONFIG_BOOTP_PXE)
char *uuid;
- size_t vci_strlen;
u16 clientarch;
#endif
printf("Invalid pxeuuid: %s\n", uuid);
}
}
+#endif
- *e++ = 60; /* Vendor Class Identifier */
- vci_strlen = strlen(CONFIG_BOOTP_VCI_STRING);
- *e++ = vci_strlen;
- memcpy(e, CONFIG_BOOTP_VCI_STRING, vci_strlen);
- e += vci_strlen;
+#ifdef CONFIG_BOOTP_VCI_STRING
+ put_vci(e, CONFIG_BOOTP_VCI_STRING);
#endif
#if defined(CONFIG_BOOTP_VENDOREX)
*e++ = (576 - 312 + OPT_FIELD_SIZE) & 0xff;
#endif
+#if defined(CONFIG_BOOTP_VCI_STRING) || \
+ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_NET_VCI_STRING))
+#ifdef CONFIG_SPL_BUILD
+ put_vci(e, CONFIG_SPL_NET_VCI_STRING);
+#else
+ put_vci(e, CONFIG_BOOTP_VCI_STRING);
+#endif
+#endif
+
#if defined(CONFIG_BOOTP_SUBNETMASK)
*e++ = 1; /* Subnet mask request */
*e++ = 4;
LIBS-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/libonenand.o
LIBS-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/libdma.o
LIBS-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/memory.o
+LIBS-$(CONFIG_SPL_NET_SUPPORT) += net/libnet.o
+LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/libnet.o
+LIBS-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/libphy.o
ifneq ($(CONFIG_AM33XX)$(CONFIG_OMAP34XX)$(CONFIG_OMAP44XX)$(CONFIG_OMAP54XX),)
LIBS-y += $(CPUDIR)/omap-common/libomap-common.o
--- /dev/null
+#!/bin/sh
+#
+# binutils-version [-p] gas-command
+#
+# Prints the binutils version of `gas-command' in a canonical 4-digit form
+# such as `0222' for binutils 2.22
+#
+
+gas="$*"
+
+if [ ${#gas} -eq 0 ]; then
+ echo "Error: No assembler specified."
+ printf "Usage:\n\t$0 <gas-command>\n"
+ exit 1
+fi
+
+MAJOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 1)
+MINOR=$($gas --version | head -1 | awk '{print $NF}' | cut -d . -f 2)
+
+printf "%02d%02d\\n" $MAJOR $MINOR
projects / people / ms / u-boot.git / commitdiff
