util-linux: Update to version 2.41

- Update from version 2.40.2 to 2.41
- Update of rootfile for all three architectures. This time confirmed that all three
   have been edited to remove the + additions to lines.
- There are two new commands available, bits and coresched. I have commented both of
   these out as they are new and have therefore never been used in the past. If they
   are something that should be used in IPFire then the lines can always be uncommented.
- Changelog
    2.41
      Release highlights - full list of all changes is too large to put here (~1400
       lines). The details can be found in the source tarball
       /Documentation/releases/v2.41-ReleaseNotes file.
	agetty:
	  - Fixed an issue where issue files were not being printed from additional
	    locations, such as /run or /usr/lib. This change now allows for the use of
	    local information from /etc, in addition to generated files from /run and
	    distribution-specific files from /usr/lib.
	cfdisk and sfdisk:
	  - Added support for the --sector-size command line option.
	sfdisk:
	  - Added a new option, --discard-free.
	fdisk:
	  - Added a new command, 'T', to discard sectors.
	chrt:
	  - The --sched-runtime now supports SCHED_{OTHER,BATCH} policies.
	column:
	  - Can now handle ANSI SGR colors inside OSC 8 hyperlink escape codes and
	     sequences.
	enosys:
	  - Can now dump defined filters.
	libmount:
	  - Added experimental support for statmount() and listmount() syscalls.
	  - This new functionality can be accessed using "findmnt --kernel=listmount".
	  - Added a new mount option, X-mount.nocanonicalize[=source|target].
	  - Added new mount extensions to the "ro" flag (ro[=vfs,fs]).
	  - Added a new option, X-mount.noloop, to disable automatic loop device
	     creation.
	  - Now supports bind symlinks over symlinks.
	  - Reads all kernel info/warning/error messages from new API syscalls (and
	     mount(8) prints them).
	libuuid:
	  - Now supports RFC9562 UUIDs.
	findmnt, lsblk, and lsfd:
	  - Added a new --hyperlink command line option to print paths as terminal
	     hyperlinks.
	findmnt:
	  - Can now address filesystems using --id and --uniq-id (requires listmount()
	     kernel support).
	flock:
	  - Added support for the --fcntl command line option.
	hardlink:
	  - Can now prioritize specified trees on the command line using
	     --prioritize-trees.
	  - Can exclude sub-trees using --exclude-subtree or keep them in the current
	     mount using --mount.
	  - Duplicates can now be printed using --list-duplicates.
	hwclock:
	  - Added a new --param-index option to address position for
	     RTC_PARAM_{GET,SET} ioctls.
	kill:
	  - Can now decode signal masks (e.g. as used in /proc) to signal names.
	libblkid:
	  - Made many changes to improve detection, including exfat, GPT, LUKS2,
	     bitlocker, etc.
	login:
	  - Added support for LOGIN_ENV_SAFELIST in /etc/login.def.
	lsfd:
	  - Now supports pidfs and AF_VSOCK sockets.
	lsipc, ipcmk, ipcrm:
	  - Now supports POSIX ipc.
	lslogins:
	  - Now supports lastlog2.
	lsns:
	  - Added support for the --filter option.
	build by meson:
	  - Now supports translated man pages and has fixed many bugs.
	mkswap:
	  - The option --file should now be usable on btrfs.
	nsenter:
	  - Improved support for pidfd and can now join target process's socket net
	     namespace.
	scriptlive:
	  - Added a new option, --echo <never|always|auto>.
	zramctl:
	  - Now supports COMP-RATIO and --algorithm-params.
    2.40.4
	libmount:
	   - Revert "libmount: exec mount helpers with posixly correct argument order"
	po:
	   - merge changes
	po-man:
	   - merge changes
	   - Fix table formatting
    2.40.3
	agetty:
	   - Prevent cursor escape
	   - add "systemd" to --version output
	   - fix ambiguous ‘else’ [-Werror=dangling-else]
	audit-arch.h:
	   - add defines for m68k, sh
	autotools:
	   - Check for BPF_OBJ_NAME_LEN (required by lsfd)
	   - add --disable-enosys, check for linux/audit.h
	   - add Libs.private to uuid.pc
	   - allow enabling dmesg with --disable-all-programs
	   - allow enabling lsblk with --disable-all-programs
	   - check for sys/vfs.h and linux/bpf.h
	   - fix securedir and pam_lastlog2 install
	bash-completion:
	   - add `--pty` and `--no-pty` options for `su` and `runuser`
	   - complete `--user` only for `runuser`, not for `su`
	chcpu(8):
	   - Document CPU deconfiguring behavior
	   - Fix typo
	ci:
	   - bump coveralls compiler version to gcc 13
	doc:
	   - fsck.8.adoc - fix email typo
	docs:
	   - update AUTHORS file
	fdisk:
	   - (man) improve --sector-size description
	   - fix SGI boot file prompt
	   - fix fdisk_sgi_set_bootfile return value
	   - fix sgi_check_bootfile name size minimum
	   - fix sgi_menu_cb return value
	fincore:
	   - Use correct syscall number for cachestat on alpha
	fstab.5 mount:
	   - fstab.5 mount.8 add note about field separator
	hardlink:
	   - fix memory corruption (size calculation)
	   - hardlink.1 directory|file is mandatory
	hwclock:
	   - Remove ioperm declare as it causes nested extern declare warning
	lib/env:
	   - fix env_list_setenv() for strings without '='
	libblkid:
	   - (exfat) validate fields used by prober
	   - (gpt) use blkid_probe_verify_csum() for partition array checksum
	   - add FSLASTBLOCK for swaparea
	   - bitlocker add image for Windows 7+ BitLocker
	   - bitlocker fix version on big-endian systems
	   - improve portability
	libfdisk:
	   - make sure libblkid uses the same sector size
	libmount:
	   - exec mount helpers with posixly correct argument order
	   - extract common error handling function
	   - propagate first error of multiple filesystem types
	libmount/context_mount:
	   - fix argument number comments
	logger:
	   - correctly format tv_usec
	lscpu:
	   - Skip aarch64 decode path for rest of the architectures
	   - make code more readable
	lslocks:
	   - remove deadcode [coverity scan]
	lsns:
	   - ignore ESRCH errors reported when accessing files under /proc
	man pages:
	   - document `--user` option for `runuser`
	   - use `user` rather than `username`
	meson:
	   - check for BPF_OBJ_NAME_LEN and linux/bpf.h
	mkswap:
	   - set selinux label also when creating file
	more:
	   - make sure we have data on stderr
	nsenter:
	   - support empty environ[]
	partx:
	   - Fix example in man page
	po:
	   - merge changes
	   - update de.po (from translationproject.org)
	   - update ja.po (from translationproject.org)
	   - update pt_BR.po (from translationproject.org)
	   - update sr.po (from translationproject.org)
	   - update zh_CN.po (from translationproject.org)
	po-man:
	   - add missing langs to po4a.cfg
	   - fix typo, update .gitignore
	   - merge changes
	   - update fr.po (from translationproject.org)
	   - update pt_BR.po (from translationproject.org)
	tests:
	   - fdisk/bsd Update expected output for alpha
	umount, losetup:
	   - Document loop destroy behavior
	uuidd:
	   - fix /var/lib/libuuid mode uuidd-tmpfiles.conf
	   - fix typo in tmpfiles.conf
	- fix /var/lib/libuuid mode uuidd-tmpfiles.conf
	- fix typo in tmpfiles.conf

Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>

diff --git a/config/rootfiles/common/aarch64/util-linux b/config/rootfiles/common/aarch64/util-linux
index d991bbda3a0f720eb9329eefb5edf03b389f1bc0..0f71057ceca7b4a380b55a582e84fb36073cf9a2 100644 (file)
--- a/config/rootfiles/common/aarch64/util-linux
+++ b/config/rootfiles/common/aarch64/util-linux
@@ -50,6 +50,7 @@ sbin/swapon
 sbin/switch_root
 sbin/wipefs
 sbin/zramctl
+#usr/bin/bits
 #usr/bin/cal
 usr/bin/chmem
 usr/bin/choom
@@ -58,6 +59,7 @@ usr/bin/choom
 #usr/bin/colcrt
 #usr/bin/colrm
 #usr/bin/column
+#usr/bin/coresched
 usr/bin/eject
 usr/bin/enosys
 usr/bin/exch
@@ -256,6 +258,7 @@ usr/sbin/rtcwake
 #usr/share/doc/util-linux
 #usr/share/doc/util-linux/getopt-example.bash
 #usr/share/doc/util-linux/getopt-example.tcsh
+#usr/share/man/man1/bits.1
 #usr/share/man/man1/cal.1
 #usr/share/man/man1/choom.1
 #usr/share/man/man1/chrt.1
@@ -263,6 +266,7 @@ usr/sbin/rtcwake
 #usr/share/man/man1/colcrt.1
 #usr/share/man/man1/colrm.1
 #usr/share/man/man1/column.1
+#usr/share/man/man1/coresched.1
 #usr/share/man/man1/dmesg.1
 #usr/share/man/man1/eject.1
 #usr/share/man/man1/enosys.1

diff --git a/config/rootfiles/common/riscv64/util-linux b/config/rootfiles/common/riscv64/util-linux
index acb1ae8e46312f9c56a48904db1b63fa2aac83c8..ce536824c687225382b75767e0d07f06b2b8326c 100644 (file)
--- a/config/rootfiles/common/riscv64/util-linux
+++ b/config/rootfiles/common/riscv64/util-linux
@@ -50,6 +50,7 @@ sbin/swapon
 sbin/switch_root
 sbin/wipefs
 sbin/zramctl
+#usr/bin/bits
 #usr/bin/cal
 usr/bin/chmem
 usr/bin/choom
@@ -58,6 +59,7 @@ usr/bin/choom
 #usr/bin/colcrt
 #usr/bin/colrm
 #usr/bin/column
+#usr/bin/coresched
 usr/bin/eject
 usr/bin/enosys
 usr/bin/exch
@@ -256,6 +258,7 @@ usr/sbin/rtcwake
 #usr/share/doc/util-linux
 #usr/share/doc/util-linux/getopt-example.bash
 #usr/share/doc/util-linux/getopt-example.tcsh
+#usr/share/man/man1/bits.1
 #usr/share/man/man1/cal.1
 #usr/share/man/man1/choom.1
 #usr/share/man/man1/chrt.1
@@ -263,6 +266,7 @@ usr/sbin/rtcwake
 #usr/share/man/man1/colcrt.1
 #usr/share/man/man1/colrm.1
 #usr/share/man/man1/column.1
+#usr/share/man/man1/coresched.1
 #usr/share/man/man1/dmesg.1
 #usr/share/man/man1/eject.1
 #usr/share/man/man1/enosys.1

diff --git a/config/rootfiles/common/x86_64/util-linux b/config/rootfiles/common/x86_64/util-linux
index 92f391d17be7d483088883562e4a497695e86f02..af44954017f79fda16fb1ae68b0c62fb0092219c 100644 (file)
--- a/config/rootfiles/common/x86_64/util-linux
+++ b/config/rootfiles/common/x86_64/util-linux
@@ -50,6 +50,7 @@ sbin/swapon
 sbin/switch_root
 sbin/wipefs
 sbin/zramctl
+#usr/bin/bits
 #usr/bin/cal
 usr/bin/chmem
 usr/bin/choom
@@ -58,6 +59,7 @@ usr/bin/choom
 #usr/bin/colcrt
 #usr/bin/colrm
 #usr/bin/column
+#usr/bin/coresched
 usr/bin/eject
 usr/bin/enosys
 usr/bin/exch
@@ -258,6 +260,7 @@ usr/sbin/rtcwake
 #usr/share/doc/util-linux
 #usr/share/doc/util-linux/getopt-example.bash
 #usr/share/doc/util-linux/getopt-example.tcsh
+#usr/share/man/man1/bits.1
 #usr/share/man/man1/cal.1
 #usr/share/man/man1/choom.1
 #usr/share/man/man1/chrt.1
@@ -265,6 +268,7 @@ usr/sbin/rtcwake
 #usr/share/man/man1/colcrt.1
 #usr/share/man/man1/colrm.1
 #usr/share/man/man1/column.1
+#usr/share/man/man1/coresched.1
 #usr/share/man/man1/dmesg.1
 #usr/share/man/man1/eject.1
 #usr/share/man/man1/enosys.1

diff --git a/lfs/util-linux b/lfs/util-linux
index c820907f9b986534a4b6a36b01895402edc87a4e..2b8a0c2dc7ec2dcfbf1cb50c8072be5c4e930adb 100644 (file)
--- a/lfs/util-linux
+++ b/lfs/util-linux
@@ -1,7 +1,7 @@
 ###############################################################################
 #                                                                             #
 # IPFire.org - A linux based firewall                                         #
-# Copyright (C) 2007-2024  IPFire Team  <info@ipfire.org>                     #
+# Copyright (C) 2007-2025  IPFire Team  <info@ipfire.org>                     #
 #                                                                             #
 # This program is free software: you can redistribute it and/or modify        #
 # it under the terms of the GNU General Public License as published by        #
@@ -24,7 +24,7 @@
 
 include Config
 
-VER        = 2.40.2
+VER        = 2.41
 
 THISAPP    = util-linux-$(VER)
 DL_FILE    = $(THISAPP).tar.xz
@@ -42,7 +42,7 @@ objects = $(DL_FILE)
 
 $(DL_FILE) = $(DL_FROM)/$(DL_FILE)
 
-$(DL_FILE)_BLAKE2 = 8306d651f27db6665e91a937c9f1970938fec5b069636fea3c2688afddebd1a3424f0b0802a034eab049cf7692dd435cf93e82aa5f4a40cc8064d60b4ca59535
+$(DL_FILE)_BLAKE2 = b0f6d63c1365d3b065584d4d79a1716e1f036474984fc08dd6b298d7f50e66736af046404d3c9d8051fd0c9c455bcd623257ea1b967b755bee063415d91c5c21
 
 install : $(TARGET)