This patch add board-level code and base DT for AP121.
Signed-off-by: Wills Wang <wills.wang@live.com>
[updated defconfig, enabled CONFIG_USE_PRIVATE_LIBGCC=y]
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
# SPDX-License-Identifier: GPL-2.0+
#
+dtb-$(CONFIG_TARGET_AP121) += ap121.dtb
dtb-$(CONFIG_TARGET_PIC32MZDASK) += pic32mzda_sk.dtb
targets += $(dtb-y)
--- /dev/null
+/*
+ * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+/dts-v1/;
+#include "ar933x.dtsi"
+
+/ {
+ model = "AP121 Reference Board";
+ compatible = "qca,ap121", "qca,ar933x";
+
+ aliases {
+ spi0 = &spi0;
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+};
+
+&xtal {
+ clock-frequency = <25000000>;
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi0 {
+ spi-max-frequency = <25000000>;
+ status = "okay";
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spi-flash";
+ memory-map = <0x9f000000 0x00800000>;
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "qca,ar933x";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "mips,mips24Kc";
+ reg = <0>;
+ };
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ xtal: xtal {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-output-names = "xtal";
+ };
+ };
+
+ pinctrl {
+ u-boot,dm-pre-reloc;
+ compatible = "qca,ar933x-pinctrl";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x18040000 0x100>;
+ };
+
+ ahb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ apb {
+ compatible = "simple-bus";
+ ranges;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ uart0: uart@18020000 {
+ compatible = "qca,ar9330-uart";
+ reg = <0x18020000 0x20>;
+ interrupts = <128 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+ };
+
+ spi0: spi@1f000000 {
+ compatible = "qca,ar7100-spi";
+ reg = <0x1f000000 0x10>;
+ interrupts = <129 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
help
This supports QCA/Atheros qca953x family SOCs.
+choice
+ prompt "Board select"
+
+config TARGET_AP121
+ bool "AP121 Reference Board"
+ select SOC_AR933X
+
+endchoice
+
+source "board/qca/ap121/Kconfig"
+
endmenu
--- /dev/null
+if TARGET_AP121
+
+config SYS_VENDOR
+ default "qca"
+
+config SYS_BOARD
+ default "ap121"
+
+config SYS_CONFIG_NAME
+ default "ap121"
+
+endif
--- /dev/null
+AP121 BOARD
+M: Wills Wang <wills.wang@live.com>
+S: Maintained
+F: board/qca/ap121/
+F: include/configs/ap121.h
+F: configs/ap121_defconfig
--- /dev/null
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y = ap121.o
--- /dev/null
+/*
+ * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/addrspace.h>
+#include <asm/types.h>
+#include <mach/ar71xx_regs.h>
+#include <mach/ddr.h>
+#include <debug_uart.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_DEBUG_UART_BOARD_INIT
+void board_debug_uart_init(void)
+{
+ void __iomem *regs;
+ u32 val;
+
+ regs = map_physmem(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE,
+ MAP_NOCACHE);
+
+ /*
+ * GPIO9 as input, GPIO10 as output
+ */
+ val = readl(regs + AR71XX_GPIO_REG_OE);
+ val &= ~AR933X_GPIO(9);
+ val |= AR933X_GPIO(10);
+ writel(val, regs + AR71XX_GPIO_REG_OE);
+
+ /*
+ * Enable UART, GPIO9 as UART_SI, GPIO10 as UART_SO
+ */
+ val = readl(regs + AR71XX_GPIO_REG_FUNC);
+ val |= AR933X_GPIO_FUNC_UART_EN | AR933X_GPIO_FUNC_RES_TRUE;
+ writel(val, regs + AR71XX_GPIO_REG_FUNC);
+}
+#endif
+
+int board_early_init_f(void)
+{
+#ifdef CONFIG_DEBUG_UART
+ debug_uart_init();
+#endif
+ ddr_init();
+ return 0;
+}
--- /dev/null
+CONFIG_MIPS=y
+CONFIG_SYS_MALLOC_F_LEN=0x2000
+CONFIG_DM_SERIAL=y
+CONFIG_DM_SPI=y
+CONFIG_DM_SPI_FLASH=y
+CONFIG_ARCH_ATH79=y
+CONFIG_DEFAULT_DEVICE_TREE="ap121"
+CONFIG_SYS_PROMPT="ap121 # "
+# CONFIG_CMD_BDI is not set
+# CONFIG_CMD_CONSOLE is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_XIMG is not set
+# CONFIG_CMD_EXPORTENV is not set
+# CONFIG_CMD_IMPORTENV is not set
+# CONFIG_CMD_EDITENV is not set
+# CONFIG_CMD_CRC32 is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_SF=y
+CONFIG_CMD_SPI=y
+# CONFIG_CMD_FPGA is not set
+# CONFIG_CMD_NET is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_SPI_FLASH_ATMEL=y
+CONFIG_SPI_FLASH_EON=y
+CONFIG_SPI_FLASH_GIGADEVICE=y
+CONFIG_SPI_FLASH_MACRONIX=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_SPI_FLASH_STMICRO=y
+CONFIG_SPI_FLASH_SST=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_SPI_FLASH_DATAFLASH=y
+CONFIG_SPI_FLASH_MTD=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_AR933X_PINCTRL=y
+CONFIG_DEBUG_UART=y
+CONFIG_DEBUG_UART_AR933X=y
+CONFIG_DEBUG_UART_BASE=0xb8020000
+CONFIG_DEBUG_UART_CLOCK=25000000
+CONFIG_DEBUG_UART_BOARD_INIT=y
+CONFIG_AR933X_UART=y
+CONFIG_ATH79_SPI=y
+CONFIG_USE_PRIVATE_LIBGCC=y
+CONFIG_OF_LIBFDT=y
--- /dev/null
+/*
+ * Copyright (C) 2015-2016 Wills Wang <wills.wang@live.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_SYS_TEXT_BASE 0x9f000000
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_SYS_MHZ 200
+#define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000)
+
+/* Cache Configuration */
+#define CONFIG_SYS_DCACHE_SIZE 0x8000
+#define CONFIG_SYS_ICACHE_SIZE 0x10000
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+
+#define CONFIG_SYS_MALLOC_LEN 0x40000
+#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000
+#define CONFIG_SYS_LOAD_ADDR 0x81000000
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
+#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_SIZE - 1)
+
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE \
+ {9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
+ "root=/dev/mtdblock2 " \
+ "rootfstype=squashfs"
+#define CONFIG_BOOTCOMMAND "sf probe;" \
+ "mtdparts default;" \
+ "bootm 0x9f300000"
+#define CONFIG_LZMA
+
+#define MTDIDS_DEFAULT "nor0=spi-flash.0"
+#define MTDPARTS_DEFAULT "mtdparts=spi-flash.0:" \
+ "256k(u-boot),64k(u-boot-env)," \
+ "2752k(rootfs),896k(uImage)," \
+ "64k(NVRAM),64k(ART)"
+
+#define CONFIG_ENV_SPI_MAX_HZ 25000000
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_OFFSET 0x40000
+#define CONFIG_ENV_SECT_SIZE 0x10000
+#define CONFIG_ENV_SIZE 0x10000
+
+/*
+ * Command
+ */
+#define CONFIG_CMD_MTDPARTS
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_CBSIZE 256
+#define CONFIG_SYS_MAXARGS 16
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_LONGHELP
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Diagnostics
+ */
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x83f00000
+#define CONFIG_CMD_MEMTEST
+
+#endif /* __CONFIG_H */
projects / people / ms / u-boot.git / commitdiff
