+++ /dev/null
-.\" Copyright (c) 1990 The Regents of the University of California.
-.\" All rights reserved.
-.\"
-.\" This code is derived from software contributed to Berkeley by
-.\" Michael Rendell.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)col.1 6.8 (Berkeley) 6/17/91
-.\"
-.TH COL "1" "July 2014" "util-linux" "User Commands"
-.SH NAME
-col \- filter reverse line feeds from input
-.SH SYNOPSIS
-.B col
-[options]
-.SH DESCRIPTION
-.B col
-filters out reverse (and half-reverse) line feeds so the output is in the
-correct order, with only forward and half-forward line feeds. It also replaces
-any whitespace characters with tabs where possible. This can be useful in
-processing the output of
-.BR nroff (1)
-and
-.BR tbl (1).
-.PP
-.B col
-reads from standard input and writes to standard output.
-.SH OPTIONS
-.TP
-\fB\-b\fR, \fB\-\-no\-backspaces\fR
-Do not output any backspaces, printing only the last character written to
-each column position.
-.TP
-\fB\-f\fR, \fB\-\-fine\fR
-Permit half-forward line feeds.
-Normally characters destined for a half-line boundary are printed on the
-following line.
-.TP
-\fB\-h\fR, \fB\-\-tabs\fR
-Output tabs instead of multiple spaces.
-.TP
-\fB\-l\fR, \fB\-\-lines\fR \fInumber\fR
-Buffer at least
-.I number
-lines in memory. By default, 128 lines are buffered.
-.TP
-\fB\-p\fR, \fB\-\-pass\fR
-Force unknown control sequences to be passed through unchanged. Normally
-.B col
-will filter out any control sequences other than those
-recognized and interpreted by itself, which are listed below.
-.TP
-\fB\-x\fR, \fB\-\-spaces\fR
-Output multiple spaces instead of tabs.
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.TP
-\fB\-H\fR, \fB\-\-help\fR
-Display help text and exit.
-.SH CONFORMING TO
-The
-.B col
-utility conforms to the Single UNIX Specification, Version 2. The
-.B \-l
-option is an extension to the standard.
-.SH NOTES
-The control sequences for carriage motion that
-.B col
-understands and their decimal values are listed in the following table:
-.PP
-.RS
-.PD 0
-.TP 18
-.B ESC\-7
-reverse line feed (escape then 7)
-.TP
-.B ESC\-8
-half reverse line feed (escape then 8)
-.TP
-.B ESC\-9
-half forward line feed (escape then 9)
-.TP
-.B backspace
-moves back one column (8); ignored in the first column
-.TP
-.B newline
-forward line feed (10); also does carriage return
-.TP
-.B carriage return
-(13)
-.TP
-.B shift in
-shift to normal character set (15)
-.TP
-.B shift out
-shift to alternate character set (14)
-.TP
-.B space
-moves forward one column (32)
-.TP
-.B tab
-moves forward to next tab stop (9)
-.TP
-.B vertical tab
-reverse line feed (11)
-.PD
-.RE
-.PP
-All unrecognized control characters and escape sequences are discarded.
-.PP
-.B col
-keeps track of the character set as characters are read and makes sure the
-character set is correct when they are output.
-.PP
-If the input attempts to back up to the last flushed line,
-.B col
-will display a warning message.
-.SH HISTORY
-A
-.B col
-command appeared in Version 6 AT&T UNIX.
-.SH SEE ALSO
-.BR expand (1),
-.BR nroff (1),
-.BR tbl (1)
-.SH AVAILABILITY
-The col command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" Copyright (c) 1980, 1990, 1993
-.\" The Regents of the University of California. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)colcrt.1 8.1 (Berkeley) 6/30/93
-.\"
-.TH COLCRT "1" "September 2011" "util-linux" "User Commands"
-.SH NAME
-colcrt \- filter nroff output for CRT previewing
-.SH SYNOPSIS
-.B colcrt
-[options]
-.RI [ file ...]
-.SH DESCRIPTION
-.B colcrt
-provides virtual half-line and reverse line feed sequences for terminals
-without such capability, and on which overstriking is destructive.
-Half-line characters and underlining (changed to dashing `\-') are placed on
-new lines in between the normal output lines.
-.SH OPTIONS
-.TP
-\fB\-\fR, \fB\-\-no\-underlining\fR
-Suppress all underlining. This option is especially useful for previewing
-.I allboxed
-tables from
-.BR tbl (1).
-.TP
-\fB\-2\fR, \fB\-\-half\-lines\fR
-Causes all half-lines to be printed, effectively double spacing the output.
-Normally, a minimal space output format is used which will suppress empty
-lines. The program never suppresses two consecutive empty lines, however.
-The
-.B \-2
-option is useful for sending output to the line printer when the output
-contains superscripts and subscripts which would otherwise be invisible.
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-Display help text and exit.
-.SH HISTORY
-The
-.B colcrt
-command appeared in 3.0BSD.
-.SH BUGS
-Should fold underlines onto blanks even with the
-.B '\-'
-option so that a true underline character would show.
-.PP
-Can't back up more than 102 lines.
-.PP
-General overstriking is lost; as a special case '|' overstruck with '\-' or
-underline becomes '+'.
-.PP
-Lines are trimmed to 132 characters.
-.PP
-Some provision should be made for processing superscripts and subscripts in
-documents which are already double-spaced.
-.SH EXAMPLES
-A typical use of
-.B colcrt
-would be:
-.PP
-.RS
-.B tbl exum2.n \&| nroff \-ms \&| colcrt \- \&| more
-.RE
-.SH SEE ALSO
-.BR col (1),
-.BR more (1),
-.BR nroff (1),
-.BR troff (1),
-.BR ul (1)
-.SH AVAILABILITY
-The colcrt command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" Copyright (c) 1980, 1990 The Regents of the University of California.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)colrm.1 6.6 (Berkeley) 3/14/91
-.\"
-.TH COLRM "1" "September 2011" "util-linux" "User Commands"
-.SH NAME
-colrm \- remove columns from a file
-.SH SYNOPSIS
-.B colrm
-.RI [ first \ [ last ]]
-.SH DESCRIPTION
-.B colrm
-removes selected columns from a file. Input is taken from standard input.
-Output is sent to standard output.
-.PP
-If called with one parameter the columns of each line will be removed
-starting with the specified
-.I first
-column. If called with two parameters the columns from the
-.I first
-column to the
-.I last
-column will be removed.
-.PP
-Column numbering starts with column 1.
-.SH OPTIONS
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-Display help text and exit.
-.SH HISTORY
-The
-.B colrm
-command appeared in 3.0BSD.
-.SH SEE ALSO
-.BR awk (1p),
-.BR column (1),
-.BR expand (1),
-.BR paste (1)
-.SH AVAILABILITY
-The colrm command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" Copyright (c) 1989, 1990, 1993
-.\" The Regents of the University of California. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)column.1 8.1 (Berkeley) 6/6/93
-.\"
-.TH COLUMN 1 "February 2019" "util-linux" "User Commands"
-.SH NAME
-column \- columnate lists
-.SH SYNOPSIS
-.BR column " [options]"
-.RI [ file ...]
-.SH DESCRIPTION
-The
-.B column
-utility formats its input into multiple columns. The util support three modes:
-.TP
-.B columns are filled before rows
-This is the default mode (required by backward compatibility).
-.TP
-.B rows are filled before columns
-This mode is enabled by option \fB\-x, \-\-fillrows\fP
-.TP
-.B table
-Determine the number of columns the input contains and create a table. This
-mode is enabled by option \fB\-t, \-\-table\fP and columns formatting is
-possible to modify by \fB\-\-table-*\fP options. Use this mode if not sure.
-.PP
-Input is taken from \fIfile\fR, or otherwise from standard input. Empty lines
-are ignored and all invalid multibyte sequences are encoded by \\x<hex> convention.
-.SH OPTIONS
-The argument \fIcolumns\fP for \fB\-\-table-*\fP options is comma separated
-list of the column names as defined by \fB\-\-table-columns\fP or it's column
-number in order as specified by input. It's possible to mix names and numbers.
-.IP "\fB\-J, \-\-json\fP"
-Use JSON output format to print the table, the option
-\fB\-\-table\-columns\fP is required and the option \fB\-\-table\-name\fP is recommended.
-.IP "\fB\-c, \-\-output\-width\fP \fIwidth\fP"
-Output is formatted to a width specified as number of characters. The original
-name of this option is \-\-columns; this name is deprecated since v2.30. Note that input
-longer than \fIwidth\fP is not truncated by default.
-.IP "\fB\-d, \-\-table\-noheadings\fP"
-Do not print header.
-This option allows the use of logical column names on the command line,
-but keeps the header hidden when printing the table.
-.IP "\fB\-o, \-\-output\-separator\fP \fIstring\fP"
-Specify the columns delimiter for table output (default is two spaces).
-.IP "\fB\-s, \-\-separator\fP \fIseparators\fP"
-Specify the possible input item delimiters (default is whitespace).
-.IP "\fB\-t, \-\-table\fP"
-Determine the number of columns the input contains and create a table.
-Columns are delimited with whitespace, by default, or with the characters
-supplied using the \fB\-\-output\-separator\fP option.
-Table output is useful for pretty-printing.
-.IP "\fB\-N, \-\-table-columns\fP \fInames\fP"
-Specify the columns names by comma separated list of names. The names are used
-for the table header or to address column in option arguments.
-.IP "\fB\-l, \-\-table-columns-limit\fP \fInumber\fP"
-Specify maximal number of the input columns.
-The last column will contain all remaining line data if the limit is smaller
-than the number of the columns in the input data.
-.IP "\fB\-R, \-\-table-right\fP \fIcolumns\fP"
-Right align text in the specified columns.
-.IP "\fB\-T, \-\-table-truncate\fP \fIcolumns\fP"
-Specify columns where text can be truncated when necessary, otherwise
-very long table entries may be printed on multiple lines.
-.IP "\fB\-E, \-\-table-noextreme\fP \fIcolumns\fP"
-Specify columns where is possible to ignore unusually long (longer than
-average) cells when calculate column width. The option has impact to the width
-calculation and table formatting, but the printed text is not affected.
-
-The option is used for the last visible column by default.
-
-.IP "\fB\-e, \-\-table\-header\-repeat\fP"
-Print header line for each page.
-.IP "\fB\-W, \-\-table-wrap\fP \fIcolumns\fP"
-Specify columns where is possible to use multi-line cell for long text when
-necessary.
-.IP "\fB\-H, \-\-table-hide\fP \fIcolumns\fP"
-Don't print specified columns. The special placeholder '\-' may be used to
-hide all unnamed columns (see \-\-table-columns).
-.IP "\fB\-O, \-\-table-order\fP \fIcolumns\fP"
-Specify columns order on output.
-.IP "\fB\-n, \-\-table-name\fP \fIname\fP"
-Specify the table name used for JSON output. The default is "table".
-.IP "\fB\-L, \-\-keep\-empty\-lines\fP"
-Preserve whitespace-only lines in the input. The default is ignore empty lines
-at all. This option’s original name was \-\-table-empty-lines but is now
-deprecated because it gives the false impression that the option only applies
-to table mode.
-.IP "\fB\-r, \-\-tree\fP \fIcolumn\fP"
-Specify column to use tree-like output. Note that the circular dependencies and
-other anomalies in child and parent relation are silently ignored.
-.IP "\fB\-i, \-\-tree\-id\fP \fIcolumn\fP"
-Specify column with line ID to create child-parent relation.
-.IP "\fB\-p, \-\-tree\-parent\fP \fIcolumn\fP"
-Specify column with parent ID to create child-parent relation.
-.IP "\fB\-x, \-\-fillrows\fP"
-Fill rows before filling columns.
-.IP "\fB\-V\fR, \fB\-\-version\fR"
-Display version information and exit.
-.IP "\fB\-h, \-\-help\fP"
-Display help text and exit.
-.SH ENVIRONMENT
-The environment variable \fBCOLUMNS\fR is used to determine the size of
-the screen if no other information is available.
-.SH HISTORY
-The column command appeared in 4.3BSD-Reno.
-.SH BUGS
-Version 2.23 changed the
-.B \-s
-option to be non-greedy, for example:
-.PP
-.EX
-\fBprintf "a:b:c\\n1::3\\n" | column \-t \-s ':'\fR
-.EE
-.PP
-Old output:
-.EX
-a b c
-1 3
-.EE
-.PP
-New output (since util-linux 2.23):
-.EX
-a b c
-1 3
-.EE
-.PP
-Historical versions of this tool indicated that "rows are filled before
-columns" by default, and that the
-.B \-x
-option reverses this. This wording did not reflect the actual behavior, and it
-has since been corrected (see above). Other implementations of
-.B column
-may continue to use the older documentation, but the behavior should be
-identical in any case.
-.SH EXAMPLES
-Print fstab with header line and align number to the right:
-.EX
-\fBsed 's/#.*//' /etc/fstab | column \-\-table \-\-table-columns SOURCE,TARGET,TYPE,OPTIONS,PASS,FREQ \-\-table-right PASS,FREQ\fR
-.EE
-.PP
-Print fstab and hide unnamed columns:
-.EX
-\fBsed 's/#.*//' /etc/fstab | column \-\-table \-\-table-columns SOURCE,TARGET,TYPE \-\-table-hide \-\fR
-.EE
-.PP
-Print a tree:
-.EX
-\fBecho \-e '1 0 A\\n2 1 AA\\n3 1 AB\\n4 2 AAA\\n5 2 AAB' | column \-\-tree-id 1 \-\-tree-parent 2 \-\-tree 3\fR
-1 0 A
-2 1 |-AA
-4 2 | |-AAA
-5 2 | `-AAB
-3 1 `-AB
-.EE
-.SH SEE ALSO
-.BR colrm (1),
-.BR ls (1),
-.BR paste (1),
-.BR sort (1)
-.SH AVAILABILITY
-The column command is part of the util-linux package and is available from
-https://www.kernel.org/pub/linux/utils/util-linux/.
+++ /dev/null
-.\" Copyright (c) 1989, 1990, 1993
-.\" The Regents of the University of California. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)hexdump.1 8.2 (Berkeley) 4/18/94
-.\"
-.TH HEXDUMP "1" "April 2013" "util-linux" "User Commands"
-.SH NAME
-hexdump \- display file contents in hexadecimal, decimal, octal, or ascii
-.SH SYNOPSIS
-.B hexdump
-.RI [options] " file" ...
-.SH DESCRIPTION
-The
-.B hexdump
-utility is a filter which displays the specified files, or
-standard input if no files are specified, in a user-specified
-format.
-.SH OPTIONS
-Below, the \fIlength\fR and \fIoffset\fR arguments may be followed by the multiplicative
-suffixes KiB (=1024), MiB (=1024*1024), and so on for GiB, TiB, PiB, EiB, ZiB and YiB
-(the "iB" is optional, e.g., "K" has the same meaning as "KiB"), or the suffixes
-KB (=1000), MB (=1000*1000), and so on for GB, TB, PB, EB, ZB and YB.
-.TP
-\fB\-b\fR, \fB\-\-one\-byte\-octal\fR
-\fIOne-byte octal display\fR. Display the input offset in hexadecimal,
-followed by sixteen space-separated, three-column, zero-filled bytes of input
-data, in octal, per line.
-.TP
-\fB\-c\fR, \fB\-\-one\-byte\-char\fR
-\fIOne-byte character display\fR. Display the input offset in hexadecimal,
-followed by sixteen space-separated, three-column, space-filled characters of
-input data per line.
-.TP
-\fB\-C\fR, \fB\-\-canonical\fR
-\fICanonical hex+ASCII display\fR. Display the input offset in hexadecimal,
-followed by sixteen space-separated, two-column, hexadecimal bytes, followed
-by the same sixteen bytes in
-.B %_p
-format enclosed in
-.RB ' | '
-characters.
-Invoking the program as
-.B hd
-implies this option.
-.TP
-\fB\-d\fR, \fB\-\-two\-bytes\-decimal\fR
-\fITwo-byte decimal display\fR. Display the input offset in hexadecimal,
-followed by eight space-separated, five-column, zero-filled, two-byte units
-of input data, in unsigned decimal, per line.
-.TP
-\fB\-e\fR, \fB\-\-format\fR \fIformat_string\fR
-Specify a format string to be used for displaying data.
-.TP
-\fB\-f\fR, \fB\-\-format\-file\fR \fIfile\fR
-Specify a file that contains one or more newline-separated format strings.
-Empty lines and lines whose first non-blank character is a hash mark (\&#)
-are ignored.
-.TP
-\fB\-L\fR, \fB\-\-color\fR[=\fIwhen\fR]
-Accept color units for the output. The optional argument \fIwhen\fP
-can be \fBauto\fR, \fBnever\fR or \fBalways\fR. If the \fIwhen\fR argument is omitted,
-it defaults to \fBauto\fR. The colors can be disabled; for the current built-in default
-see the \fB\-\-help\fR output. See also the \fBColors\fR subsection and
-the \fBCOLORS\fR section below.
-.TP
-\fB\-n\fR, \fB\-\-length\fR \fIlength\fR
-Interpret only
-.I length
-bytes of input.
-.TP
-\fB\-o\fR, \fB\-\-two\-bytes\-octal\fR
-\fITwo-byte octal display\fR. Display the input offset in hexadecimal,
-followed by eight space-separated, six-column, zero-filled, two-byte
-quantities of input data, in octal, per line.
-.TP
-\fB\-s\fR, \fB\-\-skip\fR \fIoffset\fR
-Skip
-.I offset
-bytes from the beginning of the input.
-.TP
-\fB\-v\fR, \fB\-\-no\-squeezing\fR
-The
-.B \-v
-option causes
-.B hexdump
-to display all input data. Without the
-.B \-v
-option, any number of groups of output lines which would be identical to the
-immediately preceding group of output lines (except for the input offsets),
-are replaced with a line comprised of a single asterisk.
-.TP
-\fB\-x\fR, \fB\-\-two\-bytes\-hex\fR
-\fITwo-byte hexadecimal display\fR. Display the input offset in hexadecimal,
-followed by eight space-separated, four-column, zero-filled, two-byte
-quantities of input data, in hexadecimal, per line.
-.TP
-.BR \-V , " \-\-version"
-Display version information and exit.
-.TP
-.BR \-h , " \-\-help"
-Display help text and exit.
-.PP
-For each input file,
-.B hexdump
-sequentially copies the input to standard output, transforming the data
-according to the format strings specified by the
-.B \-e
-and
-.B \-f
-options, in the order that they were specified.
-.SH FORMATS
-A format string contains any number of format units, separated by whitespace.
-A format unit contains up to three items: an iteration count, a byte count,
-and a format.
-.PP
-The iteration count is an optional positive integer, which defaults to one.
-Each format is applied iteration count times.
-.PP
-The byte count is an optional positive integer. If specified it defines the
-number of bytes to be interpreted by each iteration of the format.
-.PP
-If an iteration count and/or a byte count is specified, a single slash must
-be placed after the iteration count and/or before the byte count to
-disambiguate them. Any whitespace before or after the slash is ignored.
-.PP
-The format is required and must be surrounded by double quote (" ") marks.
-It is interpreted as a fprintf-style format string (see
-.BR fprintf (3),
-with the following exceptions:
-.TP
-1.
-An asterisk (*) may not be used as a field width or precision.
-.TP
-2.
-A byte count or field precision
-.I is
-required for each
-.B s
-conversion character (unlike the
-.BR fprintf (3)
-default which prints the entire string if the precision is unspecified).
-.TP
-3.
-The conversion characters
-.BR h , \ l , \ n , \ p ,
-.RB and \ q
-are not supported.
-.TP
-4.
-The single character escape sequences described in the C standard are
-supported:
-.PP
-.RS 13
-.PD 0
-.TP 21
-NULL
-\e0
-.TP
-<alert character>
-\ea
-.TP
-<backspace>
-\eb
-.TP
-<form-feed>
-\ef
-.TP
-<newline>
-\en
-.TP
-<carriage return>
-\er
-.TP
-<tab>
-\et
-.TP
-<vertical tab>
-\ev
-.PD
-.RE
-.SS Conversion strings
-The
-.B hexdump
-utility also supports the following additional conversion strings.
-.TP
-.B \&_a[dox]
-Display the input offset, cumulative across input files, of the next byte to
-be displayed. The appended characters
-.BR d ,
-.BR o ,
-and
-.B x
-specify the display base as decimal, octal or hexadecimal respectively.
-.TP
-.B \&_A[dox]
-Identical to the
-.B \&_a
-conversion string except that it is only performed once, when all of the
-input data has been processed.
-.TP
-.B \&_c
-Output characters in the default character set. Non-printing characters are
-displayed in three-character, zero-padded octal, except for those
-representable by standard escape notation (see above), which are displayed as
-two-character strings.
-.TP
-.B \&_p
-Output characters in the default character set. Non-printing characters are
-displayed as a single
-.RB ' \&. '.
-.TP
-.B \&_u
-Output US ASCII characters, with the exception that control characters are
-displayed using the following, lower-case, names. Characters greater than
-0xff, hexadecimal, are displayed as hexadecimal strings.
-.RS 10
-.TS
-tab(|);
-l l l l l l.
-000 nul|001 soh|002 stx|003 etx|004 eot|005 enq
-006 ack|007 bel|008 bs|009 ht|00A lf|00B vt
-00C ff|00D cr|00E so|00F si|010 dle|011 dc1
-012 dc2|013 dc3|014 dc4|015 nak|016 syn|017 etb
-018 can|019 em|01A sub|01B esc|01C fs|01D gs
-01E rs|01F us|0FF del
-.TE
-.RE
-.SS Colors
-When put at the end of a format specifier, hexdump highlights the
-respective string with the color specified. Conditions, if present, are
-evaluated prior to highlighting.
-.PP
-.B \&_L[color_unit_1,\:color_unit_2,\:...,\:color_unit_n]
-.PP
-The full syntax of a color unit is as follows:
-.PP
-.B [!]COLOR\:[:VALUE]\:[@OFFSET_START[-END]]
-.TP
-.B !
-Negate the condition. Please note that it only makes sense to negate a
-unit if both a value/\:string and an offset are specified. In that case
-the respective output string will be highlighted if and only if the
-value/\:string does not match the one at the offset.
-.TP
-.B COLOR
-One of the 8 basic shell colors.
-.TP
-.B VALUE
-A value to be matched specified in hexadecimal, or octal base, or as a
-string. Please note that the usual C escape sequences are not
-interpreted by hexdump inside the color_units.
-.TP
-.B OFFSET
-An offset or an offset range at which to check for a match. Please note
-that lone OFFSET_START uses the same value as END offset.
-.SS Counters
-The default and supported byte counts for the conversion characters
-are as follows:
-.TP
-.BR \&%_c , \ \&%_p , \ \&%_u , \ \&%c
-One byte counts only.
-.TP
-.BR \&%d , \ \&%i , \ \&%o , \ \&%u , \ \&%X , \ \&%x
-Four byte default, one, two and four byte counts supported.
-.TP
-.BR \&%E , \ \&%e , \ \&%f , \ \&%G , \ \&%g
-Eight byte default, four byte counts supported.
-.PP
-The amount of data interpreted by each format string is the sum of the data
-required by each format unit, which is the iteration count times the byte
-count, or the iteration count times the number of bytes required by the
-format if the byte count is not specified.
-.PP
-The input is manipulated in
-.IR blocks ,
-where a block is defined as the largest amount of data specified by any
-format string. Format strings interpreting less than an input block's worth
-of data, whose last format unit both interprets some number of bytes and does
-not have a specified iteration count, have the iteration count incremented
-until the entire input block has been processed or there is not enough data
-remaining in the block to satisfy the format string.
-.PP
-If, either as a result of user specification or
-.B hexdump
-modifying the iteration count as described above, an iteration count is
-greater than one, no trailing whitespace characters are output during the
-last iteration.
-.PP
-It is an error to specify a byte count as well as multiple conversion
-characters or strings unless all but one of the conversion characters or
-strings is
-.B \&_a
-or
-.BR \&_A .
-.PP
-If, as a result of the specification of the
-.B \-n
-option or end-of-file being reached, input data only partially satisfies a
-format string, the input block is zero-padded sufficiently to display all
-available data (i.e., any format units overlapping the end of data will
-display some number of the zero bytes).
-.PP
-Further output by such format strings is replaced by an equivalent number of
-spaces. An equivalent number of spaces is defined as the number of spaces
-output by an
-.B s
-conversion character with the same field width and precision as the original
-conversion character or conversion string but with any
-.RB ' \&+ ',
-\' \',
-.RB ' \&# '
-conversion flag characters removed, and referencing a NULL string.
-.PP
-If no format strings are specified, the default display is very similar to
-the \fB\-x\fR output format (the \fB\-x\fR option causes more space to be
-used between format units than in the default output).
-.SH EXIT STATUS
-.B hexdump
-exits 0 on success and >0 if an error occurred.
-.SH CONFORMING TO
-The
-.B hexdump
-utility is expected to be IEEE Std 1003.2 ("POSIX.2") compatible.
-.SH EXAMPLES
-Display the input in perusal format:
-.nf
- "%06.6_ao " 12/1 "%3_u "
- "\et\et" "%_p "
- "\en"
-.fi
-.PP
-Implement the \-x option:
-.nf
- "%07.7_Ax\en"
- "%07.7_ax " 8/2 "%04x " "\en"
-.fi
-.PP
-MBR Boot Signature example: Highlight the addresses cyan and the bytes at
-offsets 510 and 511 green if their value is 0xAA55, red otherwise.
-.nf
- "%07.7_Ax_L[cyan]\en"
- "%07.7_ax_L[cyan] " 8/2 " %04x_L[green:0xAA55@510-511,!red:0xAA55@510-511] " "\en"
-.fi
-.SH COLORS
-Implicit coloring can be disabled by an empty file \fI/etc/terminal-colors.d/hexdump.disable\fR.
-
-See
-.BR terminal-colors.d (5)
-for more details about colorization configuration.
-.SH AVAILABILITY
-The hexdump command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" This page is in the public domain
-.TH LINE 1 "July 2002" "util-linux" "User Commands"
-.SH NAME
-line \- read one line
-.SH SYNOPSIS
-.B line
-.SH DESCRIPTION
-The utility
-.B line
-copies one line (up to a newline) from standard input to standard output.
-It always prints at least a newline and returns an exit status of 1
-on EOF or read error.
-.SH SEE ALSO
-.BR read (1p)
-.SH AVAILABILITY
-The line command is part of the util-linux package and is available from
-https://www.kernel.org/pub/linux/utils/util-linux/.
+++ /dev/null
-.\" Copyright (c) 1988, 1990 The Regents of the University of California.
-.\" Copyright (c) 1988 Mark Nudleman
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)more.1 5.15 (Berkeley) 7/29/91
-.\"
-.\" Copyright (c) 1992 Rik Faith (faith@cs.unc.edu)
-.\"
-.TH MORE "1" "March 2020" "util-linux" "User Commands"
-.SH NAME
-more \- file perusal filter for crt viewing
-.SH SYNOPSIS
-.B more
-[options]
-.IR file ...
-.SH DESCRIPTION
-.B more
-is a filter for paging through text one screenful at a time. This version is
-especially primitive. Users should realize that
-.BR less (1)
-provides
-.BR more (1)
-emulation plus extensive enhancements.
-.SH OPTIONS
-Options are also taken from the environment variable
-.B MORE
-(make sure to precede them with a dash
-.RB ( \- ))
-but command-line options will override those.
-.TP
-.BR \-d , " \-\-silent"
-Prompt with "[Press space to continue, 'q' to quit.]",
-and display "[Press 'h' for instructions.]" instead of ringing
-the bell when an illegal key is pressed.
-.TP
-.BR \-l , " \-\-logical"
-Do not pause after any line containing a
-.B \&\(haL
-(form feed).
-.TP
-.BR \-f , " \-\-no\-pause"
-Count logical lines, rather than screen lines (i.e., long lines are not folded).
-.TP
-.BR \-p , " \-\-print\-over"
-Do not scroll. Instead, clear the whole screen and then display the text.
-Notice that this option is switched on automatically if the executable is
-named
-.BR page .
-.TP
-.BR \-c , " \-\-clean\-print"
-Do not scroll. Instead, paint each screen from the top, clearing the
-remainder of each line as it is displayed.
-.TP
-.BR \-s , " \-\-squeeze"
-Squeeze multiple blank lines into one.
-.TP
-.BR \-u , " \-\-plain"
-Suppress underlining. This option is silently ignored as backwards
-compatibility.
-.TP
-\fB\-n\fR, \fB\-\-lines \fInumber\fR
-Specify the
-.I number
-of lines per screenful. The
-.I number
-argument is a positive decimal integer. The
-.B \-\-lines
-option shall override any values obtained from any other source, such as
-number of lines reported by terminal.
-.TP
-.BI \- number
-A numeric option means the same as
-.B \-\-lines
-option argument.
-.TP
-.BI + number
-Start displaying each file at line
-.IR number .
-.TP
-.BI +/ string
-The
-.I string
-to be searched in each file before starting to display it.
-.TP
-\fB\-\-help\fR
-Display help text and exit.
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.SH COMMANDS
-Interactive commands for
-.B more
-are based on
-.BR vi (1).
-Some commands may be preceded by a decimal number, called k in the
-descriptions below. In the following descriptions,
-.B \(haX
-means
-.BR control-X .
-.PP
-.RS
-.PD 1
-.TP 10
-.BR h \ or \ ?
-Help; display a summary of these commands. If you forget all other
-commands, remember this one.
-.TP
-.B SPACE
-Display next k lines of text. Defaults to current screen size.
-.TP
-.B z
-Display next k lines of text. Defaults to current screen size. Argument
-becomes new default.
-.TP
-.B RETURN
-Display next k lines of text. Defaults to 1. Argument becomes new default.
-.TP
-.BR d \ or \ \&\(haD
-Scroll k lines. Default is current scroll size, initially 11. Argument
-becomes new default.
-.TP
-.BR q \ or \ Q \ or \ INTERRUPT
-Exit.
-.TP
-.B s
-Skip forward k lines of text. Defaults to 1.
-.TP
-.B f
-Skip forward k screenfuls of text. Defaults to 1.
-.TP
-.BR b \ or \ \&\(haB
-Skip backwards k screenfuls of text. Defaults to 1. Only works with files,
-not pipes.
-.TP
-.B '
-Go to the place where the last search started.
-.TP
-.B =
-Display current line number.
-.TP
-.B \&/pattern
-Search for kth occurrence of regular expression. Defaults to 1.
-.TP
-.B n
-Search for kth occurrence of last regular expression. Defaults to 1.
-.TP
-.BR !command \ or \ :!command
-Execute
-.I command
-in a subshell.
-.TP
-.B v
-Start up an editor at current line. The editor is taken from the environment
-variable
-.B VISUAL
-if defined, or
-.B EDITOR
-if
-.B VISUAL
-is not defined, or defaults
-to
-.B vi
-if neither
-.B VISUAL
-nor
-.B EDITOR
-is defined.
-.TP
-.B \&\(haL
-Redraw screen.
-.TP
-.B :n
-Go to kth next file. Defaults to 1.
-.TP
-.B :p
-Go to kth previous file. Defaults to 1.
-.TP
-.B :f
-Display current file name and line number.
-.TP
-.B \&.
-Repeat previous command.
-.RE
-.SH ENVIRONMENT
-The
-.B more
-command respects the following environment variables, if they exist:
-.TP
-.B MORE
-This variable may be set with favored options to
-.BR more .
-.TP
-.B SHELL
-Current shell in use (normally set by the shell at login time).
-.TP
-.B TERM
-The terminal type used by \fBmore\fR to get the terminal
-characteristics necessary to manipulate the screen.
-.TP
-.B VISUAL
-The editor the user prefers. Invoked when command key
-.I v
-is pressed.
-.TP
-.B EDITOR
-The editor of choice when
-.B VISUAL
-is not specified.
-.SH HISTORY
-The
-.B more
-command appeared in 3.0BSD. This man page documents
-.B more
-version 5.19 (Berkeley 6/29/88), which is currently in use in the Linux
-community. Documentation was produced using several other versions of the
-man page, and extensive inspection of the source code.
-.SH AUTHORS
-Eric Shienbrood, UC Berkeley
-.br
-Modified by Geoff Peck, UCB to add underlining, single spacing
-.br
-Modified by John Foderaro, UCB to add \-c and MORE environment variable
-.SH SEE ALSO
-.BR less (1),
-.BR vi (1)
-.SH AVAILABILITY
-The more command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" Copyright 2001 Gunnar Ritter
-.TH PG 1 "July 2014" "util-linux" "User Commands"
-.SH NAME
-pg \- browse pagewise through text files
-.SH SYNOPSIS
-.B pg
-.RB [ \-\fIamount\fP ]
-.RB [ \-p
-.IR prompt ]
-.RB [ \-cefnrs ]
-.RB [ +\fIline\fP ]
-.RB [ +/\fIpattern\fP/ ]
-.RI [ file ...]
-.SH DESCRIPTION
-.B pg
-displays a text file on a
-.SM CRT
-one screenful at once.
-After each page, a prompt is displayed. The user may then either press the
-newline key to view the next page or one of the keys described below.
-.PP
-If no filename is given on the command line,
-.B pg
-reads from standard input.
-If standard output is not a terminal,
-.B pg
-acts like
-.BR cat (1)
-but precedes each file with its name if there is more than one.
-.PP
-If input comes from a pipe,
-.B pg
-stores the data in a buffer file while reading,
-to make navigation possible.
-.SH OPTIONS
-.B pg
-accepts the following options:
-.TP
-.BI + number
-Start at the given line number.
-.TP
-.BI +/ pattern /
-Start at the line containing the Basic Regular Expression
-.I pattern
-given.
-.TP
-.BI \- number
-The number of lines per page. By default, this is the number of
-.SM CRT
-lines minus one.
-.TP
-.B \-c
-Clear the screen before a page is displayed,
-if the terminfo entry for the terminal provides this capability.
-.TP
-.B \-e
-Do not pause and display
-.SM (EOF)
-at the end of a file.
-.TP
-.B \-f
-Do not split long lines.
-.TP
-.B \-n
-Without this option, commands must be terminated by a newline character.
-With this option,
-.B pg
-advances once a command letter is entered.
-.TP
-.BI \-p \ string
-Instead of the normal prompt
-.IR : ,
-.I string
-is displayed.
-If
-.I string
-contains
-.BR %d ,
-its first occurrence is replaced by the number of the current page.
-.TP
-.B \-r
-Disallow the shell escape.
-.TP
-.B \-s
-Print messages in
-.I standout
-mode,
-if the terminfo entry for the terminal provides this capability.
-.TP
-.BR \-V , " \-\-version"
-Display version information and exit.
-.TP
-.BR \-h , " \-\-help"
-Display help text and exit.
-.SH COMMANDS
-The following commands may be entered at the prompt. Commands preceded by
-.I i
-in this document accept a number as argument, positive or negative.
-If this argument starts with
-.B +
-or
-.BR \- ,
-it is interpreted relative to the current position in the input file,
-otherwise relative to the beginning.
-.TP
-.IB i <Enter>
-Display the next or the indicated page.
-.TP
-\fIi\fR\fBd\fR or \fB\(haD\fR
-Display the next halfpage. If
-.I i
-is given, it is always interpreted relative to the current position.
-.TP
-.IB i l
-Display the next or the indicated line.
-.TP
-.IB i f
-Skip a page forward.
-.I i
-must be a positive number and is always interpreted relative
-to the current position.
-.TP
-\fIi\fR\fBw\fR or \fIi\fR\fBz\fR
-As
-.B <Enter>
-except that
-.I i
-becomes the new page size.
-.TP
-.BR . " or " \(haL
-Redraw the screen.
-.TP
-.B $
-Advance to the last line of the input file.
-.TP
-.IB i / pattern /
-Search forward until the first or the \fIi\fR-th
-occurrence of the Basic Regular Expression
-.I pattern
-is found. The search starts
-after the current page and stops at the end of the file.
-No wrap-around is performed.
-.I i
-must be a positive number.
-.TP
-\fIi\fR\fB?\fR\fIpattern\fR\fB?\fR or \fIi\fR\fB\(ha\fR\fIpattern\fR\fB\(ha\fR
-Search backward until the first or the \fIi\fR-th
-occurrence of the Basic Regular Expression
-.I pattern
-is found. The search starts
-before the current page and stops at the beginning of the file.
-No wrap-around is performed.
-.I i
-must be a positive number.
-.PP
-The search commands accept an added letter. If
-.B t
-is given, the line containing the pattern is displayed at the top of the
-screen, which is the default.
-.B m
-selects the middle and
-.B b
-the bottom of the screen.
-The selected position is used in following searches, too.
-.TP
-.IB i n
-Advance to the next file or
-.I i
-files forward.
-.TP
-.IB i p
-Reread the previous file or
-.I i
-files backward.
-.TP
-.BI s \ filename
-Save the current file to the given
-.I filename.
-.TP
-.B h
-Display a command summary.
-.TP
-.BI ! command
-Execute
-.I command
-using the shell.
-.TP
-.BR q " or " Q
-Quit.
-.PP
-If the user presses the interrupt or quit key while
-.B pg
-reads from the
-input file or writes on the terminal,
-.B pg
-will immediately display the prompt.
-In all other situations these keys will terminate
-.BR pg .
-.SH ENVIRONMENT
-The following environment variables
-affect the behavior of
-.BR pg :
-.TP
-.B COLUMNS
-Overrides the system-supplied number of columns if set.
-.TP
-.BR LANG ,\ LC_ALL ,\ LC_COLLATE ,\ LC_CTYPE ,\ LC_MESSAGES
-See
-.BR locale (7).
-.TP
-.B LINES
-Overrides the system-supplied number of lines if set.
-.TP
-.B SHELL
-Used by the
-.BR ! " command."
-.TP
-.B TERM
-Determines the terminal type.
-.SH NOTES
-.B pg
-expects the terminal tabulators to be set every eight positions.
-.PP
-Files that include
-.SM NUL
-characters cannot be displayed by
-.BR pg .
-.SH SEE ALSO
-.BR cat (1),
-.BR more (1),
-.BR sh (1p),
-.BR terminfo (5),
-.BR locale (7),
-.BR regex (7),
-.BR term (7)
-.SH AVAILABILITY
-The pg command is part of the util-linux package and is available from
-https://www.kernel.org/pub/linux/utils/util-linux/.
+++ /dev/null
-.\" Copyright (c) 1985, 1992 The Regents of the University of California.
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)rev.1 6.3 (Berkeley) 3/21/92
-.\"
-.TH REV "1" "September 2011" "util-linux" "User Commands"
-.SH NAME
-rev \- reverse lines characterwise
-.SH SYNOPSIS
-.B rev
-[option]
-.RI [ file ...]
-.SH DESCRIPTION
-The
-.B rev
-utility copies the specified files to standard output, reversing the order of
-characters in every line. If no files are specified, standard input is read.
-.PP
-This utility is a line-oriented tool and it uses in-memory allocated buffer
-for a whole wide-char line. If the input file is huge and without line breaks
-than allocate the memory for the file may be unsuccessful.
-.SH OPTIONS
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-Display help text and exit.
-.SH SEE ALSO
-.BR tac (1)
-.SH AVAILABILITY
-The rev command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
+++ /dev/null
-.\" Copyright (c) 1980, 1991, 1993
-.\" The Regents of the University of California. All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\" notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\" notice, this list of conditions and the following disclaimer in the
-.\" documentation and/or other materials provided with the distribution.
-.\" 3. All advertising materials mentioning features or use of this software
-.\" must display the following acknowledgement:
-.\" This product includes software developed by the University of
-.\" California, Berkeley and its contributors.
-.\" 4. Neither the name of the University nor the names of its contributors
-.\" may be used to endorse or promote products derived from this software
-.\" without specific prior written permission.
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
-.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
-.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
-.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
-.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
-.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
-.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
-.\" SUCH DAMAGE.
-.\"
-.\" @(#)ul.1 8.1 (Berkeley) 6/6/93
-.\"
-.TH UL "1" "September 2011" "util-linux" "User Commands"
-.SH NAME
-ul \- do underlining
-.SH SYNOPSIS
-.BR ul " [options]"
-.RI [ file ...]
-.SH DESCRIPTION
-.B ul
-reads the named files (or standard input if none are given) and translates
-occurrences of underscores to the sequence which indicates underlining for
-the terminal in use, as specified by the environment variable
-.BR TERM .
-The
-.I terminfo
-database is read to determine the appropriate sequences for underlining. If
-the terminal is incapable of underlining but is capable of a standout mode,
-then that is used instead. If the terminal can overstrike, or handles
-underlining automatically,
-.B ul
-degenerates to
-.BR cat (1).
-If the terminal cannot underline, underlining is ignored.
-.SH OPTIONS
-.TP
-\fB\-i\fR, \fB\-\-indicated\fR
-Underlining is indicated by a separate line containing appropriate dashes
-`\-'; this is useful when you want to look at the underlining which is
-present in an
-.B nroff
-output stream on a crt-terminal.
-.TP
-\fB\-t\fR, \fB\-T\fR, \fB\-\-terminal\fR \fIterminal\fR
-Override the environment variable
-.B TERM
-with the specified
-.I terminal
-type.
-.TP
-\fB\-V\fR, \fB\-\-version\fR
-Display version information and exit.
-.TP
-\fB\-h\fR, \fB\-\-help\fR
-Display help text and exit.
-.SH ENVIRONMENT
-The following environment variable is used:
-.TP
-.B TERM
-The
-.B TERM
-variable is used to relate a tty device with its device capability
-description (see
-.BR terminfo (5)).
-.B TERM
-is set at login time, either by the default terminal type specified in
-.I /etc/ttys
-or as set during the login process by the user in their
-.B login
-file (see
-.BR setenv (3)).
-.SH HISTORY
-The
-.B ul
-command appeared in 3.0BSD.
-.SH BUGS
-.B nroff
-usually outputs a series of backspaces and underlines intermixed with the
-text to indicate underlining. No attempt is made to optimize the backward
-motion.
-.SH SEE ALSO
-.BR colcrt (1),
-.BR login (1),
-.BR man (1),
-.BR nroff (1),
-.BR setenv (3),
-.BR terminfo (5)
-.SH AVAILABILITY
-The ul command is part of the util-linux package and is available from
-.UR https://\:www.kernel.org\:/pub\:/linux\:/utils\:/util-linux/
-Linux Kernel Archive
-.UE .
projects / thirdparty / util-linux.git / commitdiff
