if USB
+config DM_USB
+ bool "Enable driver model for USB"
+ depends on USB && DM
+ help
+ Enable driver model for USB. The USB interface is then implemented
+ by the USB uclass. Multiple USB controllers of different types
+ (XHCI, EHCI) can be attached and used. The 'usb' command works as
+ normal. OCHI is not supported at present.
+
+ Much of the code is shared but with this option enabled the USB
+ uclass takes care of device enumeration. USB devices can be
+ declared with the USB_DEVICE() macro and will be automatically
+ probed when found on the bus.
+
source "drivers/usb/host/Kconfig"
config USB_STORAGE
# SPDX-License-Identifier: GPL-2.0+
#
+ifdef CONFIG_DM_USB
+obj-$(CONFIG_CMD_USB) += usb-uclass.o
+endif
+
# ohci
obj-$(CONFIG_USB_OHCI_NEW) += ohci-hcd.o
obj-$(CONFIG_USB_ATMEL) += ohci-at91.o
--- /dev/null
+/*
+ * (C) Copyright 2015 Google, Inc
+ * Written by Simon Glass <sjg@chromium.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <usb.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dm/root.h>
+#include <dm/uclass-internal.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+extern bool usb_started; /* flag for the started/stopped USB status */
+static bool asynch_allowed;
+
+int usb_disable_asynch(int disable)
+{
+ int old_value = asynch_allowed;
+
+ asynch_allowed = !disable;
+ return old_value;
+}
+
+int submit_int_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
+ int length, int interval)
+{
+ struct udevice *bus = udev->controller_dev;
+ struct dm_usb_ops *ops = usb_get_ops(bus);
+
+ if (!ops->interrupt)
+ return -ENOSYS;
+
+ return ops->interrupt(bus, udev, pipe, buffer, length, interval);
+}
+
+int submit_control_msg(struct usb_device *udev, unsigned long pipe,
+ void *buffer, int length, struct devrequest *setup)
+{
+ struct udevice *bus = udev->controller_dev;
+ struct dm_usb_ops *ops = usb_get_ops(bus);
+
+ if (!ops->control)
+ return -ENOSYS;
+
+ return ops->control(bus, udev, pipe, buffer, length, setup);
+}
+
+int submit_bulk_msg(struct usb_device *udev, unsigned long pipe, void *buffer,
+ int length)
+{
+ struct udevice *bus = udev->controller_dev;
+ struct dm_usb_ops *ops = usb_get_ops(bus);
+
+ if (!ops->bulk)
+ return -ENOSYS;
+
+ return ops->bulk(bus, udev, pipe, buffer, length);
+}
+
+int usb_alloc_device(struct usb_device *udev)
+{
+ struct udevice *bus = udev->controller_dev;
+ struct dm_usb_ops *ops = usb_get_ops(bus);
+
+ /* This is only requird by some controllers - current XHCI */
+ if (!ops->alloc_device)
+ return 0;
+
+ return ops->alloc_device(bus, udev);
+}
+
+int usb_stop(void)
+{
+ struct udevice *bus;
+ struct uclass *uc;
+ int err = 0, ret;
+
+ /* De-activate any devices that have been activated */
+ ret = uclass_get(UCLASS_USB, &uc);
+ if (ret)
+ return ret;
+ uclass_foreach_dev(bus, uc) {
+ ret = device_remove(bus);
+ if (ret && !err)
+ err = ret;
+ }
+
+ usb_stor_reset();
+ usb_hub_reset();
+ usb_started = 0;
+
+ return err;
+}
+
+static int usb_scan_bus(struct udevice *bus, bool recurse)
+{
+ struct usb_bus_priv *priv;
+ struct udevice *dev;
+ int ret;
+
+ priv = dev_get_uclass_priv(bus);
+
+ assert(recurse); /* TODO: Support non-recusive */
+
+ ret = usb_scan_device(bus, 0, USB_SPEED_FULL, &dev);
+ if (ret)
+ return ret;
+
+ return priv->next_addr;
+}
+
+int usb_init(void)
+{
+ int controllers_initialized = 0;
+ struct udevice *bus;
+ struct uclass *uc;
+ int count = 0;
+ int ret;
+
+ asynch_allowed = 1;
+ usb_hub_reset();
+
+ ret = uclass_get(UCLASS_USB, &uc);
+ if (ret)
+ return ret;
+
+ uclass_foreach_dev(bus, uc) {
+ /* init low_level USB */
+ count++;
+ printf("USB");
+ printf("%d: ", bus->seq);
+ ret = device_probe(bus);
+ if (ret == -ENODEV) { /* No such device. */
+ puts("Port not available.\n");
+ controllers_initialized++;
+ continue;
+ }
+
+ if (ret) { /* Other error. */
+ printf("probe failed, error %d\n", ret);
+ continue;
+ }
+ /*
+ * lowlevel init is OK, now scan the bus for devices
+ * i.e. search HUBs and configure them
+ */
+ controllers_initialized++;
+ printf("scanning bus %d for devices... ", bus->seq);
+ debug("\n");
+ ret = usb_scan_bus(bus, true);
+ if (ret < 0)
+ printf("failed, error %d\n", ret);
+ else if (!ret)
+ printf("No USB Device found\n");
+ else
+ printf("%d USB Device(s) found\n", ret);
+ usb_started = true;
+ }
+
+ debug("scan end\n");
+ /* if we were not able to find at least one working bus, bail out */
+ if (!count)
+ printf("No controllers found\n");
+ else if (controllers_initialized == 0)
+ printf("USB error: all controllers failed lowlevel init\n");
+
+ return usb_started ? 0 : -1;
+}
+
+int usb_reset_root_port(void)
+{
+ return -ENOSYS;
+}
+
+static struct usb_device *find_child_devnum(struct udevice *parent, int devnum)
+{
+ struct usb_device *udev;
+ struct udevice *dev;
+
+ if (!device_active(parent))
+ return NULL;
+ udev = dev_get_parentdata(parent);
+ if (udev->devnum == devnum)
+ return udev;
+
+ for (device_find_first_child(parent, &dev);
+ dev;
+ device_find_next_child(&dev)) {
+ udev = find_child_devnum(dev, devnum);
+ if (udev)
+ return udev;
+ }
+
+ return NULL;
+}
+
+struct usb_device *usb_get_dev_index(struct udevice *bus, int index)
+{
+ struct udevice *hub;
+ int devnum = index + 1; /* Addresses are allocated from 1 on USB */
+
+ device_find_first_child(bus, &hub);
+ if (device_get_uclass_id(hub) == UCLASS_USB_HUB)
+ return find_child_devnum(hub, devnum);
+
+ return NULL;
+}
+
+int usb_post_bind(struct udevice *dev)
+{
+ /* Scan the bus for devices */
+ return dm_scan_fdt_node(dev, gd->fdt_blob, dev->of_offset, false);
+}
+
+int usb_port_reset(struct usb_device *parent, int portnr)
+{
+ unsigned short portstatus;
+ int ret;
+
+ debug("%s: start\n", __func__);
+
+ if (parent) {
+ /* reset the port for the second time */
+ assert(portnr > 0);
+ debug("%s: reset %d\n", __func__, portnr - 1);
+ ret = legacy_hub_port_reset(parent, portnr - 1, &portstatus);
+ if (ret < 0) {
+ printf("\n Couldn't reset port %i\n", portnr);
+ return ret;
+ }
+ } else {
+ debug("%s: reset root\n", __func__);
+ usb_reset_root_port();
+ }
+
+ return 0;
+}
+
+int usb_legacy_port_reset(struct usb_device *parent, int portnr)
+{
+ return usb_port_reset(parent, portnr);
+}
+
+int usb_scan_device(struct udevice *parent, int port,
+ enum usb_device_speed speed, struct udevice **devp)
+{
+ struct udevice *dev;
+ bool created = false;
+ struct usb_dev_platdata *plat;
+ struct usb_bus_priv *priv;
+ struct usb_device *parent_udev;
+ int ret;
+ ALLOC_CACHE_ALIGN_BUFFER(struct usb_device, udev, 1);
+ struct usb_interface_descriptor *iface = &udev->config.if_desc[0].desc;
+
+ *devp = NULL;
+ memset(udev, '\0', sizeof(*udev));
+ ret = usb_get_bus(parent, &udev->controller_dev);
+ if (ret)
+ return ret;
+ priv = dev_get_uclass_priv(udev->controller_dev);
+
+ /*
+ * Somewhat nasty, this. We create a local device and use the normal
+ * USB stack to read its descriptor. Then we know what type of device
+ * to create for real.
+ *
+ * udev->dev is set to the parent, since we don't have a real device
+ * yet. The USB stack should not access udev.dev anyway, except perhaps
+ * to find the controller, and the controller will either be @parent,
+ * or some parent of @parent.
+ *
+ * Another option might be to create the device as a generic USB
+ * device, then morph it into the correct one when we know what it
+ * should be. This means that a generic USB device would morph into
+ * a network controller, or a USB flash stick, for example. However,
+ * we don't support such morphing and it isn't clear that it would
+ * be easy to do.
+ *
+ * Yet another option is to split out the USB stack parts of udev
+ * into something like a 'struct urb' (as Linux does) which can exist
+ * independently of any device. This feels cleaner, but calls for quite
+ * a big change to the USB stack.
+ *
+ * For now, the approach is to set up an empty udev, read its
+ * descriptor and assign it an address, then bind a real device and
+ * stash the resulting information into the device's parent
+ * platform data. Then when we probe it, usb_child_pre_probe() is called
+ * and it will pull the information out of the stash.
+ */
+ udev->dev = parent;
+ udev->speed = speed;
+ udev->devnum = priv->next_addr + 1;
+ udev->portnr = port;
+ debug("Calling usb_setup_device(), portnr=%d\n", udev->portnr);
+ parent_udev = device_get_uclass_id(parent) == UCLASS_USB_HUB ?
+ dev_get_parentdata(parent) : NULL;
+ ret = usb_setup_device(udev, priv->desc_before_addr, parent_udev, port);
+ debug("read_descriptor for '%s': ret=%d\n", parent->name, ret);
+ if (ret)
+ return ret;
+ ret = usb_find_child(parent, &udev->descriptor, iface, &dev);
+ debug("** usb_find_child returns %d\n", ret);
+
+ /* TODO: Find a suitable driver and create the device */
+ return -ENOENT;
+}
+
+int usb_child_post_bind(struct udevice *dev)
+{
+ struct usb_dev_platdata *plat = dev_get_parent_platdata(dev);
+ const void *blob = gd->fdt_blob;
+ int val;
+
+ if (dev->of_offset == -1)
+ return 0;
+
+ /* We only support matching a few things */
+ val = fdtdec_get_int(blob, dev->of_offset, "usb,device-class", -1);
+ if (val != -1) {
+ plat->id.match_flags |= USB_DEVICE_ID_MATCH_DEV_CLASS;
+ plat->id.bDeviceClass = val;
+ }
+ val = fdtdec_get_int(blob, dev->of_offset, "usb,interface-class", -1);
+ if (val != -1) {
+ plat->id.match_flags |= USB_DEVICE_ID_MATCH_INT_CLASS;
+ plat->id.bInterfaceClass = val;
+ }
+
+ return 0;
+}
+
+int usb_get_bus(struct udevice *dev, struct udevice **busp)
+{
+ struct udevice *bus;
+
+ *busp = NULL;
+ for (bus = dev; bus && device_get_uclass_id(bus) != UCLASS_USB; )
+ bus = bus->parent;
+ if (!bus) {
+ /* By design this cannot happen */
+ assert(bus);
+ debug("USB HUB '%s' does not have a controller\n", dev->name);
+ return -EXDEV;
+ }
+ *busp = bus;
+
+ return 0;
+}
+
+int usb_child_pre_probe(struct udevice *dev)
+{
+ struct udevice *bus;
+ struct usb_device *udev = dev_get_parentdata(dev);
+ struct usb_dev_platdata *plat = dev_get_parent_platdata(dev);
+ int ret;
+
+ ret = usb_get_bus(dev, &bus);
+ if (ret)
+ return ret;
+ udev->controller_dev = bus;
+ udev->dev = dev;
+ udev->devnum = plat->devnum;
+ udev->slot_id = plat->slot_id;
+ udev->portnr = plat->portnr;
+ udev->speed = plat->speed;
+ debug("** device '%s': getting slot_id=%d\n", dev->name, plat->slot_id);
+
+ ret = usb_select_config(udev);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+UCLASS_DRIVER(usb) = {
+ .id = UCLASS_USB,
+ .name = "usb",
+ .flags = DM_UC_FLAG_SEQ_ALIAS,
+ .post_bind = usb_post_bind,
+ .per_child_auto_alloc_size = sizeof(struct usb_device),
+ .per_device_auto_alloc_size = sizeof(struct usb_bus_priv),
+ .child_post_bind = usb_child_post_bind,
+ .child_pre_probe = usb_child_pre_probe,
+ .per_child_platdata_auto_alloc_size = sizeof(struct usb_dev_platdata),
+};
return NULL; /* URB still pending */
}
-void usb_reset_root_port(void)
+int usb_reset_root_port(void)
{
void *mbase = host->mregs;
u8 power;
(musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ?
USB_SPEED_FULL : USB_SPEED_LOW;
mdelay((host_speed == USB_SPEED_LOW) ? 200 : 50);
+
+ return 0;
}
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
UCLASS_PCH, /* x86 platform controller hub */
UCLASS_ETH, /* Ethernet device */
UCLASS_LPC, /* x86 'low pin count' interface */
+ UCLASS_USB, /* USB bus */
UCLASS_COUNT,
UCLASS_INVALID = -1,
* (C) Copyright 2001
* Denis Peter, MPL AG Switzerland
*
+ * Adapted for U-Boot driver model
+ * (C) Copyright 2015 Google, Inc
+ *
* SPDX-License-Identifier: GPL-2.0+
* Note: Part of this code has been derived from linux
*
#ifndef _USB_H_
#define _USB_H_
+#include <fdtdec.h>
#include <usb_defs.h>
#include <linux/usb/ch9.h>
#include <asm/cache.h>
PACKET_SIZE_64 = 3,
};
+/**
+ * struct usb_device - information about a USB device
+ *
+ * With driver model both UCLASS_USB (the USB controllers) and UCLASS_USB_HUB
+ * (the hubs) have this as parent data. Hubs are children of controllers or
+ * other hubs and there is always a single root hub for each controller.
+ * Therefore struct usb_device can always be accessed with
+ * dev_get_parentdata(dev), where dev is a USB device.
+ *
+ * Pointers exist for obtaining both the device (could be any uclass) and
+ * controller (UCLASS_USB) from this structure. The controller does not have
+ * a struct usb_device since it is not a device.
+ */
struct usb_device {
int devnum; /* Device number on USB bus */
int speed; /* full/low/high */
unsigned long int_pending; /* 1 bit per ep, used by int_queue */
int act_len; /* transfered bytes */
int maxchild; /* Number of ports if hub */
- int portnr;
+ int portnr; /* Port number, 1=first */
+#ifndef CONFIG_DM_USB
+ /* parent hub, or NULL if this is the root hub */
struct usb_device *parent;
struct usb_device *children[USB_MAXCHILDREN];
-
void *controller; /* hardware controller private data */
+#endif
/* slot_id - for xHCI enabled devices */
unsigned int slot_id;
+#ifdef CONFIG_DM_USB
+ struct udevice *dev; /* Pointer to associated device */
+ struct udevice *controller_dev; /* Pointer to associated controller */
+#endif
};
struct int_queue;
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
-#ifdef CONFIG_MUSB_HOST
-void usb_reset_root_port(void);
+
+#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_DM_USB)
+int usb_reset_root_port(void);
#else
#define usb_reset_root_port()
#endif
int usb_set_protocol(struct usb_device *dev, int ifnum, int protocol);
int usb_set_idle(struct usb_device *dev, int ifnum, int duration,
int report_id);
-struct usb_device *usb_get_dev_index(int index);
int usb_control_msg(struct usb_device *dev, unsigned int pipe,
unsigned char request, unsigned char requesttype,
unsigned short value, unsigned short index,
struct usb_hub_descriptor desc;
};
+#ifdef CONFIG_DM_USB
+/**
+ * struct usb_platdata - Platform data about a USB controller
+ *
+ * Given a USB controller (UCLASS_USB) dev this is dev_get_platdata(dev)
+ */
+struct usb_platdata {
+ enum usb_init_type init_type;
+};
+
+/**
+ * struct usb_dev_platdata - Platform data about a USB device
+ *
+ * Given a USB device dev this structure is dev_get_parent_platdata(dev).
+ * This is used by sandbox to provide emulation data also.
+ *
+ * @id: ID used to match this device
+ * @speed: Stores the speed associated with a USB device
+ * @devnum: Device address on the USB bus
+ * @slot_id: USB3 slot ID, which is separate from the device address
+ * @portnr: Port number of this device on its parent hub, numbered from 1
+ * (0 mean this device is the root hub)
+ * @strings: List of descriptor strings (for sandbox emulation purposes)
+ * @desc_list: List of descriptors (for sandbox emulation purposes)
+ */
+struct usb_dev_platdata {
+ struct usb_device_id id;
+ enum usb_device_speed speed;
+ int devnum;
+ int slot_id;
+ int portnr; /* Hub port number, 1..n */
+#ifdef CONFIG_SANDBOX
+ struct usb_string *strings;
+ /* NULL-terminated list of descriptor pointers */
+ struct usb_generic_descriptor **desc_list;
+#endif
+ int configno;
+};
+
+/**
+ * struct usb_bus_priv - information about the USB controller
+ *
+ * Given a USB controller (UCLASS_USB) 'dev', this is
+ * dev_get_uclass_priv(dev).
+ *
+ * @next_addr: Next device address to allocate minus 1. Incremented by 1
+ * each time a new device address is set, so this holds the
+ * number of devices on the bus
+ * @desc_before_addr: true if we can read a device descriptor before it
+ * has been assigned an address. For XHCI this is not possible
+ * so this will be false.
+ */
+struct usb_bus_priv {
+ int next_addr;
+ bool desc_before_addr;
+};
+
+/**
+ * struct dm_usb_ops - USB controller operations
+ *
+ * This defines the operations supoorted on a USB controller. Common
+ * arguments are:
+ *
+ * @bus: USB bus (i.e. controller), which is in UCLASS_USB.
+ * @udev: USB device parent data. Controllers are not expected to need
+ * this, since the device address on the bus is encoded in @pipe.
+ * It is used for sandbox, and can be handy for debugging and
+ * logging.
+ * @pipe: An assortment of bitfields which provide address and packet
+ * type information. See create_pipe() above for encoding
+ * details
+ * @buffer: A buffer to use for sending/receiving. This should be
+ * DMA-aligned.
+ * @length: Buffer length in bytes
+ */
+struct dm_usb_ops {
+ /**
+ * control() - Send a control message
+ *
+ * Most parameters are as above.
+ *
+ * @setup: Additional setup information required by the message
+ */
+ int (*control)(struct udevice *bus, struct usb_device *udev,
+ unsigned long pipe, void *buffer, int length,
+ struct devrequest *setup);
+ /**
+ * bulk() - Send a bulk message
+ *
+ * Parameters are as above.
+ */
+ int (*bulk)(struct udevice *bus, struct usb_device *udev,
+ unsigned long pipe, void *buffer, int length);
+ /**
+ * interrupt() - Send an interrupt message
+ *
+ * Most parameters are as above.
+ *
+ * @interval: Interrupt interval
+ */
+ int (*interrupt)(struct udevice *bus, struct usb_device *udev,
+ unsigned long pipe, void *buffer, int length,
+ int interval);
+ /**
+ * alloc_device() - Allocate a new device context (XHCI)
+ *
+ * Before sending packets to a new device on an XHCI bus, a device
+ * context must be created. If this method is not NULL it will be
+ * called before the device is enumerated (even before its descriptor
+ * is read). This should be NULL for EHCI, which does not need this.
+ */
+ int (*alloc_device)(struct udevice *bus, struct usb_device *udev);
+};
+
+#define usb_get_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
+#define usb_get_emul_ops(dev) ((struct dm_usb_ops *)(dev)->driver->ops)
+
+#ifdef CONFIG_MUSB_HOST
+int usb_reset_root_port(void);
+#endif
+
+/**
+ * usb_get_dev_index() - look up a device index number
+ *
+ * Look up devices using their index number (starting at 0). This works since
+ * in U-Boot device addresses are allocated starting at 1 with no gaps.
+ *
+ * TODO(sjg@chromium.org): Remove this function when usb_ether.c is modified
+ * to work better with driver model.
+ *
+ * @bus: USB bus to check
+ * @index: Index number of device to find (0=first). This is just the
+ * device address less 1.
+ */
+struct usb_device *usb_get_dev_index(struct udevice *bus, int index);
+
+/**
+ * usb_legacy_port_reset() - Legacy function to reset a hub port
+ *
+ * @hub: Hub device
+ * @portnr: Port number (1=first)
+ */
+int usb_legacy_port_reset(struct usb_device *hub, int portnr);
+
+/**
+ * usb_setup_device() - set up a device ready for use
+ *
+ * @dev: USB device pointer. This need not be a real device - it is
+ * common for it to just be a local variable with its ->dev
+ * member (i.e. @dev->dev) set to the parent device
+ * @do_read: true to read the device descriptor before an address is set
+ * (should be false for XHCI buses, true otherwise)
+ * @parent: Parent device (either UCLASS_USB or UCLASS_USB_HUB)
+ * @portnr: Port number on hub (1=first) or 0 for none
+ * @return 0 if OK, -ve on error */
+int usb_setup_device(struct usb_device *dev, bool do_read,
+ struct usb_device *parent, int portnr);
+
+/**
+ * usb_hub_scan() - Scan a hub and find its devices
+ *
+ * @hub: Hub device to scan
+ */
+int usb_hub_scan(struct udevice *hub);
+
+/**
+ * usb_scan_device() - Scan a device on a bus
+ *
+ * Scan a device on a bus. It has already been detected and is ready to
+ * be enumerated. This may be either the root hub (@parent is a bus) or a
+ * normal device (@parent is a hub)
+ *
+ * @parent: Parent device
+ * @port: Hub port number (numbered from 1)
+ * @speed: USB speed to use for this device
+ * @devp: Returns pointer to device if all is well
+ * @return 0 if OK, -ve on error
+ */
+int usb_scan_device(struct udevice *parent, int port,
+ enum usb_device_speed speed, struct udevice **devp);
+
+/**
+ * usb_get_bus() - Find the bus for a device
+ *
+ * Search up through parents to find the bus this device is connected to. This
+ * will be a device with uclass UCLASS_USB.
+ *
+ * @dev: Device to check
+ * @busp: Returns bus, or NULL if not found
+ * @return 0 if OK, -EXDEV is somehow this bus does not have a controller (this
+ * indicates a critical error in the USB stack
+ */
+int usb_get_bus(struct udevice *dev, struct udevice **busp);
+
+/**
+ * usb_select_config() - Set up a device ready for use
+ *
+ * This function assumes that the device already has an address and a driver
+ * bound, and is ready to be set up.
+ *
+ * This re-reads the device and configuration descriptors and sets the
+ * configuration
+ *
+ * @dev: Device to set up
+ */
+int usb_select_config(struct usb_device *dev);
+
+/**
+ * usb_child_pre_probe() - Pre-probe function for USB devices
+ *
+ * This is called on all children of hubs and USB controllers (i.e. UCLASS_USB
+ * and UCLASS_USB_HUB) when a new device is about to be probed. It sets up the
+ * device from the saved platform data and calls usb_select_config() to
+ * finish set up.
+ *
+ * Once this is done, the device's normal driver can take over, knowing the
+ * device is accessible on the USB bus.
+ *
+ * This function is for use only by the internal USB stack.
+ *
+ * @dev: Device to set up
+ */
+int usb_child_pre_probe(struct udevice *dev);
+
+struct ehci_ctrl;
+
+/**
+ * usb_setup_ehci_gadget() - Set up a USB device as a gadget
+ *
+ * TODO(sjg@chromium.org): Tidy this up when USB gadgets can use driver model
+ *
+ * This provides a way to tell a controller to start up as a USB device
+ * instead of as a host. It is untested.
+ */
+int usb_setup_ehci_gadget(struct ehci_ctrl **ctlrp);
+
+/**
+ * usb_stor_reset() - Prepare to scan USB storage devices
+ *
+ * Empty the list of USB storage devices in preparation for scanning them.
+ * This must be called before a USB scan.
+ */
+void usb_stor_reset(void);
+
+#else /* !CONFIG_DM_USB */
+
+struct usb_device *usb_get_dev_index(int index);
+
+#endif
+
+bool usb_device_has_child_on_port(struct usb_device *parent, int port);
+
int usb_hub_probe(struct usb_device *dev, int ifnum);
void usb_hub_reset(void);
int hub_port_reset(struct usb_device *dev, int port,
projects / people / ms / u-boot.git / commitdiff
