]> git.ipfire.org Git - people/ms/u-boot.git/commitdiff
drivers: block: add block device cache
authorEric Nelson <eric@nelint.com>
Mon, 28 Mar 2016 17:05:44 +0000 (10:05 -0700)
committerTom Rini <trini@konsulko.com>
Fri, 1 Apr 2016 21:18:27 +0000 (17:18 -0400)
Add a block device cache to speed up repeated reads of block devices by
various filesystems.

This small amount of cache can dramatically speed up filesystem
operations by skipping repeated reads of common areas of a block
device (typically directory structures).

This has shown to have some benefit on FAT filesystem operations of
loading a kernel and RAM disk, but more dramatic benefits on ext4
filesystems when the kernel and/or RAM disk are spread across
multiple extent header structures as described in commit fc0fc50.

The cache is implemented through a minimal list (block_cache) maintained
in most-recently-used order and count of the current number of entries
(cache_count). It uses a maximum block count setting to prevent copies
of large block reads and an upper bound on the number of cached areas.

The maximum number of entries in the cache defaults to 32 and the maximum
number of blocks per cache entry has a default of 2, which has shown to
produce the best results on testing of ext4 and FAT filesystems.

The 'blkcache' command (enabled through CONFIG_CMD_BLOCK_CACHE) allows
changing these values and can be used to tune for a particular filesystem
layout.

Signed-off-by: Eric Nelson <eric@nelint.com>
cmd/Kconfig
cmd/Makefile
cmd/blkcache.c [new file with mode: 0644]
disk/part.c
drivers/block/Kconfig
drivers/block/Makefile
drivers/block/blk-uclass.c
drivers/block/blkcache.c [new file with mode: 0644]
include/blk.h

index cdcaff8bea4050bdf7875a095258390caa290293..fe8b4f0510da1586969621243c6894cb740d2ccf 100644 (file)
@@ -497,6 +497,17 @@ config SYS_AMBAPP_PRINT_ON_STARTUP
        help
          Show AMBA Plug-n-Play information on startup.
 
+config CMD_BLOCK_CACHE
+       bool "blkcache - control and stats for block cache"
+       depends on BLOCK_CACHE
+       default y if BLOCK_CACHE
+       help
+         Enable the blkcache command, which can be used to control the
+         operation of the cache functions.
+         This is most useful when fine-tuning the operation of the cache
+         during development, but also allows the cache to be disabled when
+         it might hurt performance (e.g. when using the ums command).
+
 config CMD_TIME
        bool "time"
        help
index 76046218595b5e2f2c32d589e6c834607bcd984e..ba041973079cdf2e87d7742aeac622c192e1694c 100644 (file)
@@ -20,6 +20,7 @@ obj-$(CONFIG_SOURCE) += source.o
 obj-$(CONFIG_CMD_SOURCE) += source.o
 obj-$(CONFIG_CMD_BDI) += bdinfo.o
 obj-$(CONFIG_CMD_BEDBUG) += bedbug.o
+obj-$(CONFIG_CMD_BLOCK_CACHE) += blkcache.o
 obj-$(CONFIG_CMD_BMP) += bmp.o
 obj-$(CONFIG_CMD_BOOTEFI) += bootefi.o
 obj-$(CONFIG_CMD_BOOTMENU) += bootmenu.o
diff --git a/cmd/blkcache.c b/cmd/blkcache.c
new file mode 100644 (file)
index 0000000..9a619e2
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ * Copyright (C) Nelson Integration, LLC 2016
+ * Author: Eric Nelson<eric@nelint.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+
+static int blkc_show(cmd_tbl_t *cmdtp, int flag,
+                    int argc, char * const argv[])
+{
+       struct block_cache_stats stats;
+       blkcache_stats(&stats);
+
+       printf("    hits: %u\n"
+              "    misses: %u\n"
+              "    entries: %u\n"
+              "    max blocks/entry: %u\n"
+              "    max cache entries: %u\n",
+              stats.hits, stats.misses, stats.entries,
+              stats.max_blocks_per_entry, stats.max_entries);
+       return 0;
+}
+
+static int blkc_configure(cmd_tbl_t *cmdtp, int flag,
+                         int argc, char * const argv[])
+{
+       unsigned blocks_per_entry, max_entries;
+       if (argc != 3)
+               return CMD_RET_USAGE;
+
+       blocks_per_entry = simple_strtoul(argv[1], 0, 0);
+       max_entries = simple_strtoul(argv[2], 0, 0);
+       blkcache_configure(blocks_per_entry, max_entries);
+       printf("changed to max of %u entries of %u blocks each\n",
+              max_entries, blocks_per_entry);
+       return 0;
+}
+
+static cmd_tbl_t cmd_blkc_sub[] = {
+       U_BOOT_CMD_MKENT(show, 0, 0, blkc_show, "", ""),
+       U_BOOT_CMD_MKENT(configure, 3, 0, blkc_configure, "", ""),
+};
+
+static __maybe_unused void blkc_reloc(void)
+{
+       static int relocated;
+
+       if (!relocated) {
+               fixup_cmdtable(cmd_blkc_sub, ARRAY_SIZE(cmd_blkc_sub));
+               relocated = 1;
+       };
+}
+
+static int do_blkcache(cmd_tbl_t *cmdtp, int flag,
+                      int argc, char * const argv[])
+{
+       cmd_tbl_t *c;
+
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+       blkc_reloc();
+#endif
+       if (argc < 2)
+               return CMD_RET_USAGE;
+
+       /* Strip off leading argument */
+       argc--;
+       argv++;
+
+       c = find_cmd_tbl(argv[0], &cmd_blkc_sub[0], ARRAY_SIZE(cmd_blkc_sub));
+
+       if (c)
+               return c->cmd(cmdtp, flag, argc, argv);
+       else
+               return CMD_RET_USAGE;
+
+       return 0;
+}
+
+U_BOOT_CMD(
+       blkcache, 4, 0, do_blkcache,
+       "block cache diagnostics and control",
+       "show - show and reset statistics\n"
+       "blkcache configure blocks entries\n"
+);
index 67d98fe8443464800bf3cc8d5ceb4639983c6925..0aff9548c2007152d8c5144f73b4fa49401162ed 100644 (file)
@@ -268,6 +268,8 @@ void part_init(struct blk_desc *dev_desc)
        const int n_ents = ll_entry_count(struct part_driver, part_driver);
        struct part_driver *entry;
 
+       blkcache_invalidate(dev_desc->if_type, dev_desc->devnum);
+
        dev_desc->part_type = PART_TYPE_UNKNOWN;
        for (entry = drv; entry != drv + n_ents; entry++) {
                int ret;
index f35c4d4db77d370d43e8f24c86c47b1959b06811..fcc9ccdd7f85e159a8886ce258db80d54e7f3c44 100644 (file)
@@ -18,3 +18,12 @@ config DISK
          types can use this, such as AHCI/SATA. It does not provide any standard
          operations at present. The block device interface has not been converted
          to driver model.
+
+config BLOCK_CACHE
+       bool "Use block device cache"
+       default n
+       help
+         This option enables a disk-block cache for all block devices.
+         This is most useful when accessing filesystems under U-Boot since
+         it will prevent repeated reads from directory structures and other
+         filesystem data structures.
index b5c7ae1124d1645d9c23fdd7c1df73811311cdfb..b4cbb0934413822ccfbc0c3a2594ae2f2cc91ee3 100644 (file)
@@ -24,3 +24,4 @@ obj-$(CONFIG_IDE_SIL680) += sil680.o
 obj-$(CONFIG_SANDBOX) += sandbox.o
 obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
 obj-$(CONFIG_SYSTEMACE) += systemace.o
+obj-$(CONFIG_BLOCK_CACHE) += blkcache.o
index 49df2a6f8965695bffe052d64f09f81dbedd4457..617db226a2480e069286ab462a2c85e1c4473829 100644 (file)
@@ -80,11 +80,20 @@ unsigned long blk_dread(struct blk_desc *block_dev, lbaint_t start,
 {
        struct udevice *dev = block_dev->bdev;
        const struct blk_ops *ops = blk_get_ops(dev);
+       ulong blks_read;
 
        if (!ops->read)
                return -ENOSYS;
 
-       return ops->read(dev, start, blkcnt, buffer);
+       if (blkcache_read(block_dev->if_type, block_dev->devnum,
+                         start, blkcnt, block_dev->blksz, buffer))
+               return blkcnt;
+       blks_read = ops->read(dev, start, blkcnt, buffer);
+       if (blks_read == blkcnt)
+               blkcache_fill(block_dev->if_type, block_dev->devnum,
+                             start, blkcnt, block_dev->blksz, buffer);
+
+       return blks_read;
 }
 
 unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
@@ -96,6 +105,7 @@ unsigned long blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
        if (!ops->write)
                return -ENOSYS;
 
+       blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return ops->write(dev, start, blkcnt, buffer);
 }
 
@@ -108,6 +118,7 @@ unsigned long blk_derase(struct blk_desc *block_dev, lbaint_t start,
        if (!ops->erase)
                return -ENOSYS;
 
+       blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return ops->erase(dev, start, blkcnt);
 }
 
diff --git a/drivers/block/blkcache.c b/drivers/block/blkcache.c
new file mode 100644 (file)
index 0000000..46a6059
--- /dev/null
@@ -0,0 +1,173 @@
+/*
+ * Copyright (C) Nelson Integration, LLC 2016
+ * Author: Eric Nelson<eric@nelint.com>
+ *
+ * SPDX-License-Identifier:    GPL-2.0+
+ *
+ */
+#include <config.h>
+#include <common.h>
+#include <malloc.h>
+#include <part.h>
+#include <linux/ctype.h>
+#include <linux/list.h>
+
+struct block_cache_node {
+       struct list_head lh;
+       int iftype;
+       int devnum;
+       lbaint_t start;
+       lbaint_t blkcnt;
+       unsigned long blksz;
+       char *cache;
+};
+
+static LIST_HEAD(block_cache);
+
+static struct block_cache_stats _stats = {
+       .max_blocks_per_entry = 2,
+       .max_entries = 32
+};
+
+static struct block_cache_node *cache_find(int iftype, int devnum,
+                                          lbaint_t start, lbaint_t blkcnt,
+                                          unsigned long blksz)
+{
+       struct block_cache_node *node;
+
+       list_for_each_entry(node, &block_cache, lh)
+               if ((node->iftype == iftype) &&
+                   (node->devnum == devnum) &&
+                   (node->blksz == blksz) &&
+                   (node->start <= start) &&
+                   (node->start + node->blkcnt >= start + blkcnt)) {
+                       if (block_cache.next != &node->lh) {
+                               /* maintain MRU ordering */
+                               list_del(&node->lh);
+                               list_add(&node->lh, &block_cache);
+                       }
+                       return node;
+               }
+       return 0;
+}
+
+int blkcache_read(int iftype, int devnum,
+                 lbaint_t start, lbaint_t blkcnt,
+                 unsigned long blksz, void *buffer)
+{
+       struct block_cache_node *node = cache_find(iftype, devnum, start,
+                                                  blkcnt, blksz);
+       if (node) {
+               const char *src = node->cache + (start - node->start) * blksz;
+               memcpy(buffer, src, blksz * blkcnt);
+               debug("hit: start " LBAF ", count " LBAFU "\n",
+                     start, blkcnt);
+               ++_stats.hits;
+               return 1;
+       }
+
+       debug("miss: start " LBAF ", count " LBAFU "\n",
+             start, blkcnt);
+       ++_stats.misses;
+       return 0;
+}
+
+void blkcache_fill(int iftype, int devnum,
+                  lbaint_t start, lbaint_t blkcnt,
+                  unsigned long blksz, void const *buffer)
+{
+       lbaint_t bytes;
+       struct block_cache_node *node;
+
+       /* don't cache big stuff */
+       if (blkcnt > _stats.max_blocks_per_entry)
+               return;
+
+       if (_stats.max_entries == 0)
+               return;
+
+       bytes = blksz * blkcnt;
+       if (_stats.max_entries <= _stats.entries) {
+               /* pop LRU */
+               node = (struct block_cache_node *)block_cache.prev;
+               list_del(&node->lh);
+               _stats.entries--;
+               debug("drop: start " LBAF ", count " LBAFU "\n",
+                     node->start, node->blkcnt);
+               if (node->blkcnt * node->blksz < bytes) {
+                       free(node->cache);
+                       node->cache = 0;
+               }
+       } else {
+               node = malloc(sizeof(*node));
+               if (!node)
+                       return;
+               node->cache = 0;
+       }
+
+       if (!node->cache) {
+               node->cache = malloc(bytes);
+               if (!node->cache) {
+                       free(node);
+                       return;
+               }
+       }
+
+       debug("fill: start " LBAF ", count " LBAFU "\n",
+             start, blkcnt);
+
+       node->iftype = iftype;
+       node->devnum = devnum;
+       node->start = start;
+       node->blkcnt = blkcnt;
+       node->blksz = blksz;
+       memcpy(node->cache, buffer, bytes);
+       list_add(&node->lh, &block_cache);
+       _stats.entries++;
+}
+
+void blkcache_invalidate(int iftype, int devnum)
+{
+       struct list_head *entry, *n;
+       struct block_cache_node *node;
+
+       list_for_each_safe(entry, n, &block_cache) {
+               node = (struct block_cache_node *)entry;
+               if ((node->iftype == iftype) &&
+                   (node->devnum == devnum)) {
+                       list_del(entry);
+                       free(node->cache);
+                       free(node);
+                       --_stats.entries;
+               }
+       }
+}
+
+void blkcache_configure(unsigned blocks, unsigned entries)
+{
+       struct block_cache_node *node;
+       if ((blocks != _stats.max_blocks_per_entry) ||
+           (entries != _stats.max_entries)) {
+               /* invalidate cache */
+               while (!list_empty(&block_cache)) {
+                       node = (struct block_cache_node *)block_cache.next;
+                       list_del(&node->lh);
+                       free(node->cache);
+                       free(node);
+               }
+               _stats.entries = 0;
+       }
+
+       _stats.max_blocks_per_entry = blocks;
+       _stats.max_entries = entries;
+
+       _stats.hits = 0;
+       _stats.misses = 0;
+}
+
+void blkcache_stats(struct block_cache_stats *stats)
+{
+       memcpy(stats, &_stats, sizeof(*stats));
+       _stats.hits = 0;
+       _stats.misses = 0;
+}
index e83c144e6c517e96a8815f43b351b9a11f1d78af..263a791f4c8ebacfed46e01c58bd85cc88a48b35 100644 (file)
@@ -83,6 +83,97 @@ struct blk_desc {
 #define PAD_TO_BLOCKSIZE(size, blk_desc) \
        (PAD_SIZE(size, blk_desc->blksz))
 
+#ifdef CONFIG_BLOCK_CACHE
+/**
+ * blkcache_read() - attempt to read a set of blocks from cache
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ * @param start - starting block number
+ * @param blkcnt - number of blocks to read
+ * @param blksz - size in bytes of each block
+ * @param buf - buffer to contain cached data
+ *
+ * @return - '1' if block returned from cache, '0' otherwise.
+ */
+int blkcache_read
+       (int iftype, int dev,
+        lbaint_t start, lbaint_t blkcnt,
+        unsigned long blksz, void *buffer);
+
+/**
+ * blkcache_fill() - make data read from a block device available
+ * to the block cache
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ * @param start - starting block number
+ * @param blkcnt - number of blocks available
+ * @param blksz - size in bytes of each block
+ * @param buf - buffer containing data to cache
+ *
+ */
+void blkcache_fill
+       (int iftype, int dev,
+        lbaint_t start, lbaint_t blkcnt,
+        unsigned long blksz, void const *buffer);
+
+/**
+ * blkcache_invalidate() - discard the cache for a set of blocks
+ * because of a write or device (re)initialization.
+ *
+ * @param iftype - IF_TYPE_x for type of device
+ * @param dev - device index of particular type
+ */
+void blkcache_invalidate
+       (int iftype, int dev);
+
+/**
+ * blkcache_configure() - configure block cache
+ *
+ * @param blocks - maximum blocks per entry
+ * @param entries - maximum entries in cache
+ */
+void blkcache_configure(unsigned blocks, unsigned entries);
+
+/*
+ * statistics of the block cache
+ */
+struct block_cache_stats {
+       unsigned hits;
+       unsigned misses;
+       unsigned entries; /* current entry count */
+       unsigned max_blocks_per_entry;
+       unsigned max_entries;
+};
+
+/**
+ * get_blkcache_stats() - return statistics and reset
+ *
+ * @param stats - statistics are copied here
+ */
+void blkcache_stats(struct block_cache_stats *stats);
+
+#else
+
+static inline int blkcache_read
+       (int iftype, int dev,
+        lbaint_t start, lbaint_t blkcnt,
+        unsigned long blksz, void *buffer)
+{
+       return 0;
+}
+
+static inline void blkcache_fill
+       (int iftype, int dev,
+        lbaint_t start, lbaint_t blkcnt,
+        unsigned long blksz, void const *buffer) {}
+
+static inline void blkcache_invalidate
+       (int iftype, int dev) {}
+
+#endif
+
 #ifdef CONFIG_BLK
 struct udevice;
 
@@ -224,23 +315,35 @@ int blk_unbind_all(int if_type);
 static inline ulong blk_dread(struct blk_desc *block_dev, lbaint_t start,
                              lbaint_t blkcnt, void *buffer)
 {
+       ulong blks_read;
+       if (blkcache_read(block_dev->if_type, block_dev->devnum,
+                         start, blkcnt, block_dev->blksz, buffer))
+               return blkcnt;
+
        /*
         * We could check if block_read is NULL and return -ENOSYS. But this
         * bloats the code slightly (cause some board to fail to build), and
         * it would be an error to try an operation that does not exist.
         */
-       return block_dev->block_read(block_dev, start, blkcnt, buffer);
+       blks_read = block_dev->block_read(block_dev, start, blkcnt, buffer);
+       if (blks_read == blkcnt)
+               blkcache_fill(block_dev->if_type, block_dev->devnum,
+                             start, blkcnt, block_dev->blksz, buffer);
+
+       return blks_read;
 }
 
 static inline ulong blk_dwrite(struct blk_desc *block_dev, lbaint_t start,
                               lbaint_t blkcnt, const void *buffer)
 {
+       blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return block_dev->block_write(block_dev, start, blkcnt, buffer);
 }
 
 static inline ulong blk_derase(struct blk_desc *block_dev, lbaint_t start,
                               lbaint_t blkcnt)
 {
+       blkcache_invalidate(block_dev->if_type, block_dev->devnum);
        return block_dev->block_erase(block_dev, start, blkcnt);
 }
 #endif /* !CONFIG_BLK */