Samuel Thibault [Tue, 11 Apr 2023 22:12:02 +0000 (00:12 +0200)]
aio: Fix freeing memory
The content of the pool array is initialized only until pool_size,
pointers between pool_size and pool_max_size were not initialized by the
realloc call in get_elem so they should not be freed.
This fixes aio tests crashing at their termination on GNU/Hurd.
Apparently we load libc.so (and thus start using its functions) before
calling TLS_INIT_TP, so libc.so functions should not actually assume
that TLS is always set up.
Sergey Bugaev [Sun, 19 Mar 2023 15:10:10 +0000 (18:10 +0300)]
hurd: Don't leak __hurd_reply_port0
Previously, once we set up TLS, we would implicitly switch from using
__hurd_reply_port0 to reply_port inside the TCB, leaving the former
unused. But we never deallocated it, so it got leaked.
Instead, migrate the port into the new TCB's reply_port slot. This
avoids both the port leak and an extra syscall to create a new reply
port for the TCB.
Sergey Bugaev [Sun, 19 Mar 2023 15:10:08 +0000 (18:10 +0300)]
hurd: Improve reply port handling when exiting signal handlers
If we're doing signals, that means we've already got the signal thread
running, and that implies TLS having been set up. So we know that
__hurd_local_reply_port will resolve to THREAD_SELF->reply_port, and can
access that directly using the THREAD_GETMEM and THREAD_SETMEM macros.
This avoids potential miscompilations, and should also be a tiny bit
faster.
Also, use mach_port_mod_refs () and not mach_port_destroy () to destroy
the receive right. mach_port_destroy () should *never* be used on
mach_task_self (); this can easily lead to port use-after-free
vulnerabilities if the task has any other references to the same port.
Sergey Bugaev [Sun, 19 Mar 2023 15:10:07 +0000 (18:10 +0300)]
hurd: Only check for TLS initialization inside rtld or in static builds
When glibc is built as a shared library, TLS is always initialized by
the call of TLS_INIT_TP () macro made inside the dynamic loader, prior
to running the main program (see dl-call_tls_init_tp.h). We can take
advantage of this: we know for sure that __LIBC_NO_TLS () will evaluate
to 0 in all other cases, so let the compiler know that explicitly too.
Also, only define _hurd_tls_init () and TLS_INIT_TP () under the same
conditions (either !SHARED or inside rtld), to statically assert that
this is the case.
Other than a microoptimization, this also helps with avoiding awkward
sharing of the __libc_tls_initialized variable between ld.so and libc.so
that we would have to do otherwise -- we know for sure that no sharing
is required, simply because __libc_tls_initialized would always be set
to true inside libc.so.
These are just regular local variables that are not accessed in any
funny ways, not even though a pointer. There's absolutely no reason to
declare them volatile. It only ends up hurting the quality of the
generated machine code.
If anything, it would make sense to decalre sigsp as *pointing* to
volatile memory (volatile void *sigsp), but evidently that's not needed
either.
Paul Eggert [Sat, 8 Apr 2023 20:51:26 +0000 (13:51 -0700)]
manual: update AddressSanitizer discussion
* manual/string.texi (Truncating Strings): Update obsolescent
reference and use the more-generic term “AddressSanitizer”.
Mention fortification, too. -fcheck-pointer-bounds is no longer
supported.
Paul Eggert [Sat, 8 Apr 2023 20:51:26 +0000 (13:51 -0700)]
manual: improve string section wording
* manual/string.texi: Editorial fixes. Do not say “text” when
“string” or “string contents” is meant, as a C string can contain
bytes that are not valid text in the current encoding.
When warning about strcat efficiency, warn similarly about strncat
and wcscat. “coping” → “copying”.
Mention at the start of the two problematic sections that problems
are discussed at section end.
H.J. Lu [Wed, 5 Apr 2023 16:21:26 +0000 (09:21 -0700)]
<bits/platform/x86.h>: Rename to x86_cpu_INDEX_7_ECX_15
Rename x86_cpu_INDEX_7_ECX_1 to x86_cpu_INDEX_7_ECX_15 for the unused bit
15 in ECX from CPUID with EAX == 0x7 and ECX == 0. Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
sysdeps/mach/hurd/htl/pt-pthread_self.c: New file.
htl/Makefile: .. Add it to libc routine.
sysdeps/mach/hurd/htl/pt-sysdep.c(__pthread_self): Remove it.
sysdeps/mach/hurd/htl/pt-sysdep.h(__pthread_self): Add hidden propertie.
htl/Versions(__pthread_self) Version it as private symbol.
htl/pt-nthreads.c: new file.
htl/Makefile: Add it to routine.
htl/Versions: version it as private libc symbol.
htl/pt-create.c: remove his definition here.
htl/pt-internal.h: add propertie to it declaration.
As indicated by sparc kernel-features.h, even though sparc64 defines
__NR_pause, it is not supported (ENOSYS). Always use ppoll or the
64 bit time_t variant instead.
math: Remove the error handling wrapper from fmod and fmodf
The error handling is moved to sysdeps/ieee754 version with no SVID
support. The compatibility symbol versions still use the wrapper
with SVID error handling around the new code. There is no new symbol
version nor compatibility code on !LIBM_SVID_COMPAT targets
(e.g. riscv).
The ia64 is unchanged, since it still uses the arch specific
__libm_error_region on its implementation. For both i686 and m68k,
which provive arch specific implementation, wrappers are added so
no new symbol are added (which would require to change the
implementations).
It shows an small improvement, the results for fmod:
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 8 (which is sizeof of uint32_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 8;
ex -= 8;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, and multiplication):
This uses a new algorithm similar to already proposed earlier [1].
With x = mx * 2^ex and y = my * 2^ey (mx, my, ex, ey being integers),
the simplest implementation is:
mx * 2^ex == 2 * mx * 2^(ex - 1)
while (ex > ey)
{
mx *= 2;
--ex;
mx %= my;
}
With mx/my being mantissa of double floating pointer, on each step the
argument reduction can be improved 11 (which is sizeo of uint64_t minus
MANTISSA_WIDTH plus the signal bit):
while (ex > ey)
{
mx << 11;
ex -= 11;
mx %= my;
} */
The implementation uses builtin clz and ctz, along with shifts to
convert hx/hy back to doubles. Different than the original patch,
this path assume modulo/divide operation is slow, so use multiplication
with invert values.
I see the following performance improvements using fmod benchtests
(result only show the 'mean' result):
I also see similar improvements on arm-linux-gnueabihf when running on
the N1 aarch64 chips, where it a lot of soft-fp implementation (for
modulo, clz, ctz, and multiplication):
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^8):
1024 inputs between FLT_MIN and FLT_MAX;
3. Close exponents (ey >= -103 and |x/y| < 2^8): 1024 inputs with
exponents between -10 and 10. Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
Add three different dataset, from random floating point numbers:
1. Subnormals: 128 inputs.
2. Normal numbers with large exponent difference (|x/y| > 2^52):
1024 inputs between DBL_MIN and DBL_MAX;
3. Close exponents (ey >= -907 and |x/y| < 2^52): 1024 inputs with
exponents between -10 and 10. Reviewed-by: Wilco Dijkstra <Wilco.Dijkstra@arm.com>
H.J. Lu [Thu, 16 Mar 2023 00:42:54 +0000 (17:42 -0700)]
x86: Set FSGSBASE to active if enabled by kernel
Linux kernel uses AT_HWCAP2 to indicate if FSGSBASE instructions are
enabled. If the HWCAP2_FSGSBASE bit in AT_HWCAP2 is set, FSGSBASE
instructions can be used in user space. Define dl_check_hwcap2 to set
the FSGSBASE feature to active on Linux when the HWCAP2_FSGSBASE bit is
set.
Add a test to verify that FSGSBASE is active on current kernels.
NB: This test will fail if the kernel doesn't set the HWCAP2_FSGSBASE
bit in AT_HWCAP2 while fsgsbase shows up in /proc/cpuinfo. Reviewed-by: Florian Weimer <fweimer@redhat.com>
x86_64: Fix asm constraints in feraiseexcept (bug 30305)
The divss instruction clobbers its first argument, and the constraints
need to reflect that. Fortunately, with GCC 12, generated code does
not actually change, so there is no externally visible bug.
Suggested-by: Jakub Jelinek <jakub@redhat.com> Reviewed-by: Noah Goldstein <goldstein.w.n@gmail.com>
manual: Document __wur usage under _FORTIFY_SOURCE
The __warn_unused_result__ attribute is only enabled when fortification
is enabled. Mention that in the document. The rationale for this is
essentially to mitigate against CWE-252:
Sergey Bugaev [Sun, 19 Mar 2023 15:10:14 +0000 (18:10 +0300)]
hurd: Microoptimize _hurd_self_sigstate ()
When THREAD_GETMEM is defined with inline assembly, the compiler may not
optimize away the two reads of _hurd_sigstate. Help it out a little bit
by only reading it once. This also makes for a slightly cleaner code.
Sergey Bugaev [Sun, 19 Mar 2023 15:09:58 +0000 (18:09 +0300)]
hurd: Use uintptr_t for register values in trampoline.c
This is more correct, if only because these fields are defined as having
the type unsigned int in the Mach headers, so casting them to a signed
int and then back is suboptimal.
Also, remove an extra reassignment of uesp -- this is another remnant of
the ecx kludge.
Sergey Bugaev [Sun, 19 Mar 2023 15:09:54 +0000 (18:09 +0300)]
mach, hurd: Drop __libc_lock_self0
This was used for the value of libc-lock's owner when TLS is not yet set
up, so THREAD_SELF can not be used. Since the value need not be anything
specific -- it just has to be non-NULL -- we can just use a plain
constant, such as (void *) 1, for this. This avoids accessing the symbol
through GOT, and exporting it from libc.so in the first place.
Sergey Bugaev [Sun, 19 Mar 2023 15:09:51 +0000 (18:09 +0300)]
hurd: Disable O_TRUNC and FS_RETRY_MAGICAL in rtld
hurd/lookup-retry.c is compiled into rtld, the dynamic linker/loader. To
avoid pulling in file_set_size, file_utimens, tty/ctty stuff, more
string/memory code (memmove, strncpy, strcpy), and more strtoul/itoa
code, compile out support for O_TRUNC and FS_RETRY_MAGICAL when building
hurd/lookup-retry.c for rtld. None of that functionality is useful to
rtld during startup anyway. Keep support for FS_RETRY_MAGICAL("/"),
since that does not pull in much, and is required for following absolute
symlinks.
The large number of extra code being pulled into rtld was noticed by
reviewing librtld.map & elf/librtld.os.map in the build tree.
It is worth noting that once libc.so is loaded, the real __open, __stat,
etc. replace the minimal versions used initially by rtld -- this is
especially important in the Hurd port, where the minimal rtld versions
do not use the dtable and just pass real Mach port names as fds. Thus,
once libc.so is loaded, rtld will gain access to the full
__hurd_file_name_lookup_retry () version, complete with FS_RETRY_MAGICAL
support, which is important in case the program decides to
dlopen ("/proc/self/fd/...") or some such.
Sergey Bugaev [Sun, 19 Mar 2023 15:09:48 +0000 (18:09 +0300)]
hurd: Remove __hurd_threadvar_stack_{offset,mask}
Noone is or should be using __hurd_threadvar_stack_{offset,mask}, we
have proper TLS now. These two remaining variables are never set to
anything other than zero, so any code that would try to use them as
described would just dereference a zero pointer and crash. So remove
them entirely.
Sergey Bugaev [Sun, 19 Mar 2023 15:09:47 +0000 (18:09 +0300)]
hurd: Make exception subcode a long
On EXC_BAD_ACCESS, exception subcode is used to pass the faulting memory
address, so it needs to be (at least) pointer-sized. Thus, make it into
a long. This matches the corresponding change in GNU Mach.
Message-Id: <20230319151017.531737-5-bugaevc@gmail.com>
DJ Delorie [Wed, 29 Mar 2023 04:18:40 +0000 (00:18 -0400)]
memalign: Support scanning for aligned chunks.
This patch adds a chunk scanning algorithm to the _int_memalign code
path that reduces heap fragmentation by reusing already aligned chunks
instead of always looking for chunks of larger sizes and splitting
them. The tcache macros are extended to allow removing a chunk from
the middle of the list.
The goal is to fix the pathological use cases where heaps grow
continuously in workloads that are heavy users of memalign.
Note that tst-memalign-2 checks for tcache operation, which
malloc-check bypasses.
And make always supported. The configure option was added on glibc 2.25
and some features require it (such as hwcap mask, huge pages support, and
lock elisition tuning). It also simplifies the build permutations.
Changes from v1:
* Remove glibc.rtld.dynamic_sort changes, it is orthogonal and needs
more discussion.
* Cleanup more code. Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
Prevent sh from interpreting a user string as shell options if it
starts with '-' or '+'. Since the version of /bin/sh used for testing
system() is different from the full-fledged system /bin/sh add support
to it for handling "--" after "-c". Add a testcase to ensure the
expected behavior.
Signed-off-by: Joe Simmons-Talbott <josimmon@redhat.com> Reviewed-by: Adhemerval Zanella <adhemerval.zanella@linaro.org>
The hooks mechanism uses symbol sets for running lists of functions,
which requires either extra linker directives to provide any hardening
(such as RELRO) or additional code (such as pointer obfuscation via
mangling with random value).
Currently only hurd uses set-hooks.h so we remove it from the generic
includes. The generic implementation uses direct function calls which
provide hardening and good code generation, observability and debugging
without the need for extra linking options or special code handling.
Now that there is no need to use a special linker script to hardening
internal data structures, remove the --with-default-link configure
option and associated definitions. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Instead of using a special ELF section along with a linker script
directive to put the IO vtables within the RELRO section, the libio
vtables are all moved to an array marked as data.relro (so linker
will place in the RELRO segment without the need of extra directives).
To avoid static linking namespace issues and including all vtable
referenced objects, all required function pointers are set to weak alias.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu.
Instead define the required fields in system dependend files. The only
system dependent definition is FILENAME_MAX, which should match POSIX
PATH_MAX, and it is obtained from either kernel UAPI or mach headers.
Currently set pre-defined value from current kernels.
It avoids a circular dependendy when including stdio.h in
gen-as-const-headers files.
Checked on x86_64-linux-gnu and i686-linux-gnu Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Move libc_freeres_ptrs and libc_subfreeres to hidden/weak functions
They are both used by __libc_freeres to free all library malloc
allocated resources to help tooling like mtrace or valgrind with
memory leak tracking.
The current scheme uses assembly markers and linker script entries
to consolidate the free routine function pointers in the RELRO segment
and to be freed buffers in BSS.
This patch changes it to use specific free functions for
libc_freeres_ptrs buffers and call the function pointer array directly
with call_function_static_weak.
It allows the removal of both the internal macros and the linker
script sections.
Checked on x86_64-linux-gnu, i686-linux-gnu, and aarch64-linux-gnu. Reviewed-by: Carlos O'Donell <carlos@redhat.com>
Joe Ramsay [Fri, 24 Mar 2023 12:10:10 +0000 (12:10 +0000)]
benchtests: Move libmvec benchtest inputs to benchtests directory
This allows other targets to use the same inputs for their own libmvec
microbenchmarks without having to duplicate them in their own
subdirectory. Reviewed-by: Szabolcs Nagy <szabolcs.nagy@arm.com>
If using -D_FORITFY_SOURCE=3 (in my case, I've patched GCC to add
=3 instead of =2 (we've done =2 for years in Gentoo)), building
glibc tests will fail on tst-bz11319-fortify2 like:
```
<command-line>: error: "_FORTIFY_SOURCE" redefined [-Werror]
<built-in>: note: this is the location of the previous definition
cc1: all warnings being treated as errors
```
It's just because we're always setting -D_FORTIFY_SOURCE=2
rather than unsetting it first. If F_S is already 2, it's harmless,
but if it's another value (say, 1, or 3), the compiler will bawk.
(I'm not aware of a reason this couldn't be tested with =3,
but the toolchain support is limited for that (too new), and we want
to run the tests everywhere possible.)
As Siddhesh noted previously, we could implement some fallback
logic to determine the maximal F_S value supported by the toolchain,
which is a bit easier now that autoconf-archive has been updated for F_S=3
(https://github.com/autoconf-archive/autoconf-archive/pull/269), but let's
revisit this if it continues to crop up.
Signed-off-by: Sam James <sam@gentoo.org> Reviewed-by: Siddhesh Poyarekar <siddhesh@sourceware.org>
We need to ignore it in ldconfig or ldconfig will consider all shared
objects linked by Binutils 2.40 "unsupported". Maybe we should stop
setting EF_LARCH_OBJABI_V1 for shared objects, but Binutils 2.40 is
already released and we cannot change it.
Andreas Schwab [Thu, 23 Mar 2023 15:18:50 +0000 (16:18 +0100)]
_dl_map_object_from_fd: Remove unnecessary debugger notification in error path
After commit ed3ce71f5c ("elf: Move la_activity (LA_ACT_ADD) after
_dl_add_to_namespace_list() (BZ #28062)") it is no longer necessary to
reset the debugger state in the error case, since the debugger
notification only happens after no more errors can occur.