Adolf Belka [Thu, 25 Nov 2021 18:17:41 +0000 (19:17 +0100)]
liburcu: New dependency for build of xfsprogs
- Created lfs file
- Created rootfile but all entries commented out. If the use of userspace rcu becomes
something to be required as part of IPFire then the appropriate entries in the
rootfile can be uncommented in a future commit.
- Added liburcu to the make.sh file just before xfsprogs
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Thu, 25 Nov 2021 18:17:40 +0000 (19:17 +0100)]
xfsprogs: Update to version 5.14.0
- Update from 5.12.0 to 5.14.0
- Update of rootfile not required
- Build of xfsprogs now requires liburcu to be built. Added as separate commit.
- Changelog
xfsprogs-5.14.0 (19 Nov 2021)
- debian: Fix FTBFS (Boian Bonev)
- debian: Pass --build and --host to configure (Bastian Germann)
- debian: Update Uploaders list (Bastian Germann)
xfsprogs-5.14.0-rc1 (12 Nov 2021)
- xfsprogs: introduce liburcu support (Dave Chinner)
- xfsprogs: convert atomic to uatomic (Dave Chinner)
- xfsprogs: convert utilities to use "fallthrough;" (Darrick J. Wong)
- libxfs: port xfs_set_inode_alloc from kernel (Darrick J. Wong)
- mkfs: warn about V4 deprecation (Darrick J. Wong)
- xfs_db: convert agresv to use for_each_perag (Darrick J. Wong)
xfsprogs-5.13.0 (20 Aug 2021)
- No further changes
xfsprogs-5.13.0-rc1 (02 Aug 2021)
- mkfs: validate rtextsz hint when rtinherit is set (Darrick J. Wong)
- xfs_repair: invalidate dirhash when junking dirent (Darrick J. Wong)
- xfs_repair: validate inherited rtextsz hint alignmt (Darrick J. Wong)
- xfs_quota: allow truncate of grp & prj quota files (Darrick J. Wong)
- xfs_io: allow callers to dump fs stats individually (Darrick J. Wong)
- xfs_io: don't count fsmaps before querying fsmaps (Darrick J. Wong)
- xfs_io: print header once when dumping fsmap in csv (Darrick J. Wong)
- xfs_io: clean up the funshare command a bit (Darrick J. Wong)
- xfs_io: fix broken funshare_cmd usage (Darrick J. Wong)
xfsprogs-5.13.0-rc0 (01 Jul 2021)
- libxfs changes merged from kernel 5.13
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Mon, 27 Sep 2021 15:34:18 +0000 (17:34 +0200)]
pam: Update to version 1.5.2
- Update from 1.5.1 to 1.5.2
- Update rootfile
- Changelog
Release 1.5.2
* pam_exec: implemented quiet_log option.
* pam_mkhomedir: added support of HOME_MODE and UMASK from /etc/login.defs.
* pam_timestamp: changed hmac algorithm to call openssl instead of the bundled
sha1 implementation if selected, added option to select
the hash algorithm to use with HMAC.
* Added pkgconfig files for provided libraries.
* Added --with-systemdunitdir configure option to specify systemd unit
directory.
* Added --with-misc-conv-bufsize configure option to specify the buffer size
in libpam_misc's misc_conv() function, raised the default value for this
parameter from 512 to 4096.
* Multiple minor bug fixes, portability fixes, documentation improvements,
and translation updates.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:20:57 +0000 (23:20 +0200)]
shadow: Update to version 4.9
- Update from 4.2.1 (2015) to 4.9 (2021)
- Update rootfile
- Update patch for suppression of groups installation
- Changelog
* Release 4.9
2021-07-22 Serge Hallyn <serge@hallyn.com>
* Updated translations (Björn Esser, Juergen Hoetzel)
* Major salt updates (Björn Esser)
* Various coverity and cleanup fixes (Iker Pedrosa)
* Consistently use 0 to disable PASS_MIN_DAYS in man (tzccinct)
* Implement NSS support for subids and a libsubid (Serge Hallyn)
* setfcap: retain setfcap when mapping uid 0 (Christian Brauner)
* login.defs: include HMAC_CRYPTO_ALGO key (Iker Pedrosa)
* selinux fixes (Christian Göttsche)
* Fix path prefix path handling (Lucas Servén Marín)
* Manpage updates (tzccinct, Sevan Janiyan, Iker Pedrosa, Geert Ijewski,
谭九鼎, Jamin W. Collins, towerpark, andydna, Frans Spiesschaert)
* Treat an empty passwd field as invalid (Haelwenn Monnier)
* newxidmap: allow running under alternative gid (Martijn de Gouw)
* usermod: check that shell is executable (Geert Ijewski)
* Add yescript support (Rodolphe Bréard)
* useradd memleak fixes (whzhe)
* useradd: use built-in settings by default (Ludwig Nussel)
* getdefs: add foreign (non-shadow-utils) items (Karel Zak)
* buffer overflow fixes (Tobias Stoeckmann)
* Adding run-parts style for pre and post useradd/del (ed@s5h.net)
2020-01-23 Serge Hallyn <serge@hallyn.com>
* selinux: inclue stdio (Michael Vetter)
* man: don't suggest making groupmems user-writeable (Michael Weiser)
* Makefile: bail out on error in for loops (Wolfgang Bumiller)
* Adding logging of SSH_ORIGINAL_COMMAND to nologin. (ed@s5h.net)
* add new HOME_MODE login.defs option (Duncan Overbruck)
* Add tty logging to useradd (ed@s5h.net)
* Useradd: make non-executable shell check only a warning (Tomas Mraz)
* Update Dutch translation (Frans-Spiesschaert)
* user_busy: Do not mistake a regular user process for a namespaced one (Tomas Mraz)
* Revert "Honor --sbindir and --bindir for binary installation" Patrick McLean)
2019-12-20 Dave Reisner <dreisner@archlinux.org>
* Do not auto-enable acct_tools_setuid just because
pam is enabled. NOTE - any distros which are relying
on this behavior will need to switch to configure
--enable-account-tools-setuid
* Release 4.8
2019-12-01 Serge Hallyn <serge@hallyn.com>
* Initial optional bcrypt support.
* Make build/install of 'su' optional.
* Fix for vipw not resuming correctly when suspended
* Sync password field descriptions in manpages
* Check for valid shell argument in useradd
* Allow translation of new strings through POTFILES.in
* Migrate to itstool for translations
* Migrate to new SELinux api
* Support --enable-vendordir
* pwck: Only check homedir if set and not a system user
* Support nonstandard usernames
* sget{pw,gr}ent: check for data at EOL
* Add YYY-MM-DD support in chage
* Fix failing chmod calls for suidubins
* Fix --sbindir and --bindir for binary installations
* Fix LASTLOG_UID_MAX in login.defs
* Fix configure error with dash
* Release 4.7
2019-06-13 Serge Hallyn <serge@hallyn.com>
* Spawn: don't loop forever on ECHILD
* Do not fail locking if there is a stale lockfile Tomas Mraz)
* Use lckpwdf if prefix not set (Tomas Mraz)
* Build: check correct DocBook version (Jan Tojnar)
* Usermod: Print 'no changes' to stdout, not stderr (Serge Hallyn)
* Add support for btrfs subvolumes for home (Adam Majer)
* Fix chpasswd long line handling (Nathan Ruiz)
* Use secure_getenv for gettime (Chris Lamb)
* Make sp_lstchg reproducible (Chris Lamb)
* Do not crash commonio_close if db file is not open (Tomas Mraz)
* Don't flush nscd and sssd cache in read-only mode (Charlie Vuillemez)
* French manpage update (Alban VIDAL)
* Fix manpage defaults for SUB_UID/GID_COUNT (Tomas Mraz)
* Sync po files from shadow.pot (Alban VIDAL)
* Usermod: guard against unsafe chown of homedir contents (Tomas Mraz)
* Add LASTLOG_UID_MAX to login.defs (Tomas Mraz)
* new[ug]idmap file capabilities support (Giuseppe Scrivano and Christian Brauner)
* Fix segfault in useradd (Tomas Mraz)
* Coverity issues (Tomas Mraz)
* Flush sssd caches (Jakub Hrozek)
* Log UID in nologin (Vladimir Ivanov)
* run pam_getenvlist after setup_env in su.c (Michael Vogt)
* Support systems with only utmpx (A. Wilcox)
* Fix unguarded ENABLE_SUBIDS code (Jan Chren (rindeal))
* Update po/zh_CN translation (Lion Yang)
* Create parent dirs for useradd -m (Michael Vetter)
* Prevent usermod segv
* Fix usermod crash (fariouche)
* Release 4.6
2018-04-29 Serge Hallyn <serge@hallyn.com>
* Newgrp: avoid unnecessary lookups
* Make language less binary
* Add error when turning off man switch
* Spelling fixes
* Make userdel work with -R
* newgidmap: enforce setgroups=deny if self-mapping a group
* Norwegian bokmål translation
* pwck: prevent crash by not passing O_CREAT
* WITH_TCB fixes from Mandriva
* Fix pwconv and grpconv entry skips
* Fix -- slurping in su
* add --prefix option
2017-07-16 Serge Hallyn <serge@hallyn.com>
* Import new Dutch translations.
2017-07-10 Serge Hallyn <serge@hallyn.com>
* Expand error codes for groupmod.
2017-05-17 Serge Hallyn <serge@hallyn.com>
* Release 4.5
2017-05-17 Serge Hallyn <serge@hallyn.com>
* Patch from Tobias Stoeckmann fixing regression in previous CVE fix
preventing SIGTERM to su from being propagated to the job.
* Patch from Chris Lamb making sp_lstchg shadow field reproducible.
* Merge Russian translation updates from Yuri Kozlov
* Fix missing close of subuid file on error
2017-02-23 Serge Hallyn <serge@hallyn.com>
* Merge patch by Tobias Stoeckmann <tobias@stoeckmann.org> to fix
the equivalent of util-linux CVE-2017-2616.
2017-02-08 Serge Hallyn <serge@hallyn.com>
* Update Kazakh translations
* Consult configuration before calculating subuids
* Remove misplaced semicolon
2017-01-29 Serge Hallyn <serge@hallyn.com>
* Patch from Fedora to improve performance with SSSD, Winbind,
or nss_ldap. (Tomas Mraz)
* Make sure knowndef_table is NULL-terminated. (Bernhard Rosenkränzer)
2016-12-21 Serge Hallyn <serge@hallyn.com>
* Drop leading underscore from _COMMONIO_H and _SHADOWIO_H
* Fix readability in usermod error messages.
* Reset user in tallylog
* Add audit support to su
* Changes since 4.4
2016-12-02 Serge Hallyn <serge@hallyn.com>
- Use sizeof rather than hardcoding snprintf args
- Fix useradd improper default loading
- Update Vietnamese translations
- Update Polish translations
- Remove non-POSIX chmod option in Makefile
- Fix suidubins assignments
- Fix --add-subuids etc spelling in manpages
- Audit homedir ownership change.
- Print error on selinux file context update failure
- Keep original file perms when creating a backup
* Changes since 4.2.1:
2016-12-02 Serge Hallyn <serge@hallyn.com>
- Documentation, error report and translations updates
- Replace path_max with 32
- User namespace support fixes/updates including:
- Correct sanity checks in newXidmap
- Fix building without subuid support
- Add /etc/subuid support for UID matching
- Support subuid for nonlocal users
- Default to 65536 subuid allocations
- Respect -r
- Check for range overflows
- Add tests from svn tree
- Use AC_CHECK_SIZEOF for uid_t size checks
- Accomodate missing /etc and login.defs
- Support FORCE_SHADOW
- Be more robust in hostile environment
- Allow removing a primary group
- Clear passwords on __pw_dup errors
- Memory leak fix in commonio_update and get_map_ranges
- Fix resource leak in syslog_sg
- Fix user busy error at userdel
- Support set/clear lastlog record via lastlog command
- Add --no-create-home as longopt for -M
- Fix signal races
- Reduce syslog priority of common usage events
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Thu, 25 Nov 2021 18:16:23 +0000 (19:16 +0100)]
curl: Update to version 7.80.0
- Update from 7.79.1 to 7.80.0
- Update of rootfile
- Changelog is too long to include here.
This update fixes 172 bugs the details of which can be found in the CHANGES file in
the source tarball.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 27 Nov 2021 13:34:50 +0000 (14:34 +0100)]
elfutils: Update to version 0.186
- Update from 0.185 to 0.186
- Update of rootfile
- find-dependencies with old libs did not report any issues
- Changelog
2021-11-10 Mark Wielaard <mark@klomp.org>
* configure.ac (AC_INIT): Set version to 0.186.
* NEWS: Add translation item.
2021-09-03 John Mellor-Crummey <johnmc@rice.edu>
* NEWS: Read inlining info in NVIDIA extended line map
2021-08-10 Adrian Ratiu <adrian.ratiu@collabora.com>
* configure.ac (AC_CACHE_CHECK): Rework std=gnu99 check to allow clang.
2021-08-20 Saleem Abdulrasool <abdulras@google.com>
* Add AC_CHECK_HEADERS for error.h and err.h.
2021-07-28 Mark Wielaard <mark@klomp.org>
* configure.ac (AC_CHECK_DECLS): Add reallocarray check.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 27 Nov 2021 13:35:15 +0000 (14:35 +0100)]
ethtool: Update to version 5.15
- Update from 5.13 to 5.15
- Update of rootfile not required
- Changelog
Release version 5.15 Michal Kubecek
update UAPI header copies Michal Kubecek
netlink: settings: Correct duplicate condition Bastian Germann
Merge branch 'review/module-fixes-2-v2' Michal Kubecek
sff-8636: Remove extra blank lines Ido Schimmel
sff-8636: Convert if statement to switch-case Ido Schimmel
sff-8636: Fix incorrect function name Ido Schimmel
sff-8636: Remove incorrect comment Ido Schimmel
cmis: Correct comment Ido Schimmel
cmis: Fix wrong define name Ido Schimmel
cmis: Fix CLEI code parsing Ido Schimmel
Merge branch 'review/module-fixes' into master Michal Kubecek
netlink: eeprom: Fix compilation when pretty dump is disabled Ido Schimmel
ethtool: Fix compilation warning when pretty dump is disabled Ido Schimmel
netlink: eeprom: Fallback to IOCTL when a complete hex/raw dump is requested Ido Schimmel
cmis: Fix invalid memory access in IOCTL path Ido Schimmel
sff-8636: Fix parsing of Page 03h in IOCTL path Ido Schimmel
Merge branch 'next' into master Michal Kubecek
Release version 5.14 Michal Kubecek
netlink: settings: add netlink support for coalesce cqe mode parameter Yufeng Mo
pretty: update message descriptions for coalescing Michal Kubecek
netlink: settings: add two link extended substates of bad signal integrity Guangbin Huang
update UAPI header copies Michal Kubecek
pretty: add message descriptions for PHC virtual clocks Michal Kubecek
pretty: add message descriptions for FEC stats Michal Kubecek
pretty: reorder to match enum values Michal Kubecek
update UAPI header copies Michal Kubecek
cmdline: skip dummy args entry in find_option() Michal Kubecek
Merge branch 'review/nojson-fail' into master Michal Kubecek
ethtool: return error if command does not support --json Jakub Kicinski
ethtool: use dummy args[] entry for no-args case Jakub Kicinski
ethtool: remove questionable goto Jakub Kicinski
Remove trailing newline in perror messages Jules Maselbas
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sun, 28 Nov 2021 22:16:07 +0000 (23:16 +0100)]
libgpg-error: Update to version 1.43
- Update from 1.42 to 1.43
- Update of rootfile
- Changelog - full details can be found in the ChangeLog file in the source tarball
Noteworthy changes in version 1.43 (2021-11-03) [C32/A32/R1]
* Fix for building against GNU libc 2.34. [T5547]
* Fix build problems on macOS. [T5440,T5610]
* Fix gpgrt-config problems. [T5381,T5595]
* Fix gpgrt_free for legacy platforms. [448bf7b01cad]
* Fix truncation of error message in the middle of a character. [T5048]
* Fix the --disable-threads configure options. [T5495]
* Improve lock-obj generation for cross-builds [99ae862a96a5]
* Improve cross-builds. [T5365]
* Improve gpgrt_wait_processes. [T5381]
* Allow config files to read values from the Windows Registry and
from envvars. [b1790f4cc71f]
* Update the Russian and Czech translations.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 27 Nov 2021 13:35:35 +0000 (14:35 +0100)]
iproute2: Update to version 5.15.0
- Update from 5.14.0 to 5.15.0
- Update of rootfile
- Changelog
v5.15.0 Stephen Hemminger
rdma: Fix SRQ resource tracking information json Neta Ostrovsky
man: devlink-port: fix pfnum for devlink port add Antoine Tenart
Merge branch 'managed-neighbor' into next David Ahern
ip, neigh: Add NTF_EXT_MANAGED support Daniel Borkmann
ip, neigh: Add missing NTF_USE support Daniel Borkmann
ip, neigh: Fix up spacing in netlink dump Daniel Borkmann
xfrm: enable to manage default policies Nicolas Dichtel
Merge branch 'rdma-optional-stats' into next David Ahern
uapi: pickup fix for xfrm ABI breakage Stephen Hemminger
iplink: enable to specify index when changing netns Nicolas Dichtel
Merge branch 'config-libdir' into next David Ahern
configure: add the --libdir option Andrea Claudi
configure: add the --prefix option Andrea Claudi
configure: support --param=value style Andrea Claudi
configure: simplify options parsing Andrea Claudi
configure: fix parsing issue with more than one value per option Andrea Claudi
configure: fix parsing issue on libbpf_dir option Andrea Claudi
configure: fix parsing issue on include_dir option Andrea Claudi
rdma: Add optional-counters set/unset support Neta Ostrovsky
rdma: Add stat "mode" support Neta Ostrovsky
rdma: Update uapi headers Neta Ostrovsky
Update kernel headers David Ahern
mptcp: cleanup include section. Stephen Hemminger
lib/bpf: fix map-in-map creation without prepopulation Paul Chaignon
man: devlink-port: remove extra .br Antoine Tenart
man: devlink-port: fix style Antoine Tenart
man: devlink-port: fix the devlink port add synopsis Antoine Tenart
Merge branch 'main' into next David Ahern
Merge branch 'ioam-encap-modes' into next David Ahern
Update documentation Justin Iurman
Add support for IOAM encap modes Justin Iurman
cmd: use spaces instead of tabs for usage indentation Frank Villaro-Dixon
ip: nexthop: keep cache netlink socket open Nikolay Aleksandrov
devlink: print maximum number of snapshots if available Jacob Keller
Update kernel headers David Ahern
mptcp: unbreak JSON endpoint list Davide Caratti
Merge branch 'nexthop-cache' into next David Ahern
ip: nexthop: add print_cache_nexthop which prints and manages the nh cache Nikolay Aleksandrov
ip: route: print and cache detailed nexthop information when requested Nikolay Aleksandrov
ip: nexthop: add a helper which retrieves and prints cached nh entry Nikolay Aleksandrov
ip: nexthop: add cache helpers Nikolay Aleksandrov
ip: nexthop: factor out ipnh_get_id rtnl talk into a helper Nikolay Aleksandrov
ip: nexthop: factor out print_nexthop's nh entry printing Nikolay Aleksandrov
ip: nexthop: parse attributes into nh entry structure before printing Nikolay Aleksandrov
ip: nexthop: add nh entry structure Nikolay Aleksandrov
ip: nexthop: split print_nh_res_group into parse and print parts Nikolay Aleksandrov
ip: nexthop: add resilient group structure Nikolay Aleksandrov
ip: export print_rta_gateway version which outputs prepared gateway string Nikolay Aleksandrov
ip: print_rta_if takes ifindex as device argument instead of attribute Nikolay Aleksandrov
Merge branch 'ax.25-netrom-rose' into next David Ahern
ROSE: Print decoded addresses rather than hex numbers. Ralf Baechle
ROSE: Add rose_ntop implementation. Ralf Baechle
NETROM: Print decoded addresses rather than hex numbers. Ralf Baechle
NETROM: Add netrom_ntop implementation. Ralf Baechle
AX.25: Print decoded addresses rather than hex numbers. Ralf Baechle
AX.25: Add ax25_ntop implementation. Ralf Baechle
lib: bpf_legacy: fix bpffs mount when /sys/fs/bpf exists Andrea Claudi
tc/f_flower: fix port range parsing Puneet Sharma
lib: bpf_legacy: add prog name, load time, uid and btf id in prog info dump Gokul Sivakumar
Merge branch 'main' into next David Ahern
uapi: updates from 5.-rc1 Stephen Hemminger
ip: Support filter links/neighs with no master Lahav Schlesinger
man: ip-macsec: fix gcm-aes-256 formatting issue Lennert Buytenhek
Merge branch 'main' into next David Ahern
Merge branch 'bridge-mcast_router' into next David Ahern
bridge: vlan: add support for mcast_router option Nikolay Aleksandrov
bridge: vlan: set vlan option attributes while parsing Nikolay Aleksandrov
Update kernel headers David Ahern
ip: rewrite routel in python Stephen Hemminger
ip: remove routef script Stephen Hemminger
ip: remove ifcfg script Stephen Hemminger
ip: remove old rtpr script Stephen Hemminger
iptuntap: fix multi-queue flag display David Marchand
man: ip-link: remove double of Nikolay Aleksandrov
configure: restore backward compatibility Luca Boccassi
tree-wide: fix some typos found by Lintian Luca Boccassi
ip: remove leftovers from IPX and DECnet Stephen Hemminger
uapi: update headers from 5. merge Stephen Hemminger
ip/bond: add lacp active support Hangbin Liu
Update kernel headers David Ahern
ip/tunnel: always print all known attributes Ilya Dmitrichenko
ipioam6: use print_nl instead of print_null Justin Iurman
tc/skbmod: Introduce SKBMOD_F_ECN option Peilin Ye
IOAM man8 Justin Iurman
New IOAM6 encap type for routes Justin Iurman
Add, show, link, remove IOAM namespaces and schemas Justin Iurman
Import ioam6 uapi headers David Ahern
Update kernel headers David Ahern
ipneigh: add support to print brief output of neigh cache in tabular format Gokul Sivakumar
Merge branch 'bridge-vlan-global-mcast' into next David Ahern
bridge: vlan: add support for dumping router ports Nikolay Aleksandrov
bridge: vlan: add global mcast_querier option Nikolay Aleksandrov
bridge: vlan: add global mcast_startup_query_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_query_response_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_query_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_querier_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_membership_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_last_member_interval option Nikolay Aleksandrov
bridge: vlan: add global mcast_startup_query_count option Nikolay Aleksandrov
bridge: vlan: add global mcast_last_member_count option Nikolay Aleksandrov
bridge: vlan: add global mcast_mld_version option Nikolay Aleksandrov
bridge: vlan: add global mcast_igmp_version option Nikolay Aleksandrov
bridge: vlan: add global mcast_snooping option Nikolay Aleksandrov
bridge: vlan: add support to set global vlan options Nikolay Aleksandrov
bridge: vlan: add support for vlan filtering when dumping options Nikolay Aleksandrov
bridge: vlan: add support to show global vlan options Nikolay Aleksandrov
bridge: vlan: skip unknown attributes when printing options Nikolay Aleksandrov
bridge: vlan: factor out vlan option printing Nikolay Aleksandrov
ip: bridge: add support for mcast_vlan_snooping Nikolay Aleksandrov
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
sysctl: kernel 5.13 has removed some scheduler variables.
sched_min_granularity_ns and sched_migration_cost_ns are not
available for sysctl anymore. They can only altered via debugfs
if scheduler debugging is enabled.
Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Jonatan Schlag [Sun, 28 Nov 2021 15:43:52 +0000 (16:43 +0100)]
Inform users about the eol of i?86
The warning point to a wiki page which is currently in construction.
This should give us the opportunity to add further information for
these users even if we do not provide updates anymore.
Signed-off-by: Jonatan Schlag <jonatan.schlag@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org> Signed-off-by: Arne Fitzenreiter <arne_f@ipfire.org>
Peter Müller [Wed, 24 Nov 2021 11:12:27 +0000 (12:12 +0100)]
Tor: update to 0.4.6.8
Full changelog as per https://gitweb.torproject.org/tor.git/plain/ChangeLog?h=tor-0.4.6.8:
Changes in version 0.4.6.8 - 2021-10-26
This version fixes several bugs from earlier versions of Tor. One
highlight is a fix on how we track DNS timeouts to report general
relay overload.
o Major bugfixes (relay, overload state):
- Relays report the general overload state for DNS timeout errors
only if X% of all DNS queries over Y seconds are errors. Before
that, it only took 1 timeout to report the overload state which
was just too low of a threshold. The X and Y values are 1% and 10
minutes respectively but they are also controlled by consensus
parameters. Fixes bug 40491; bugfix on 0.4.6.1-alpha.
o Minor features (fallbackdir):
- Regenerate fallback directories for October 2021. Closes
ticket 40493.
o Minor features (testing):
- On a testing network, relays can now use the
TestingMinTimeToReportBandwidth option to change the smallest
amount of time over which they're willing to report their observed
maximum bandwidth. Previously, this was fixed at 1 day. For
safety, values under 2 hours are only supported on testing
networks. Part of a fix for ticket 40337.
- Relays on testing networks no longer rate-limit how frequently
they are willing to report new bandwidth measurements. Part of a
fix for ticket 40337.
- Relays on testing networks now report their observed bandwidths
immediately from startup. Previously, they waited until they had
been running for a full day. Closes ticket 40337.
o Minor bugfix (onion service):
- Do not flag an HSDir as non-running in case the descriptor upload
or fetch fails. An onion service closes pending directory
connections before uploading a new descriptor which can thus lead
to wrongly flagging many relays and thus affecting circuit building
path selection. Fixes bug 40434; bugfix on 0.2.0.13-alpha.
- Improve logging when a bad HS version is given. Fixes bug 40476;
bugfix on 0.4.6.1-alpha.
o Minor bugfix (CI, onion service):
- Exclude onion service version 2 Stem tests in our CI. Fixes bug 40500;
bugfix on 0.3.2.1-alpha.
o Minor bugfixes (compatibility):
- Fix compatibility with the most recent Libevent versions, which no
longer have an evdns_set_random_bytes() function. Because this
function has been a no-op since Libevent 2.0.4-alpha, it is safe
for us to just stop calling it. Fixes bug 40371; bugfix
on 0.2.1.7-alpha.
o Minor bugfixes (onion service, TROVE-2021-008):
- Only log v2 access attempts once total, in order to not pollute
the logs with warnings and to avoid recording the times on disk
when v2 access was attempted. Note that the onion address was
_never_ logged. This counts as a Low-severity security issue.
Fixes bug 40474; bugfix on 0.4.5.8.
Since we configure Tor to use libseccomp, the latter has been updated
for kernel 5.15 as well, hence we need to ship Tor either way.
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Peter Müller [Wed, 24 Nov 2021 11:11:48 +0000 (12:11 +0100)]
libseccomp: Update to 2.5.3
Release annnouncement as per https://github.com/seccomp/libseccomp/releases/tag/v2.5.3:
Version 2.5.3 - November 5, 2021
Update the syscall table for Linux v5.15
Fix issues with multiplexed syscalls on mipsel introduced in v2.5.2
Document that seccomp_rule_add() may return -EACCES
Fix issues with test 11-basic-basic_errors on old kernels (API level < 5)
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Fri, 6 Aug 2021 11:16:41 +0000 (13:16 +0200)]
whois: Installation of aan actively maintained whois client
- This whois client is being actively maintained. This version 5.5.10 was released on
June 6th 2021 and regular updates have been ocurring several times per year.
- This client has all of its default whois servers compiled into it. These can be seen
by reading the source files in the tarball.
- Therefore the whois.conf file is available for any additional servers that are decided
to be required but as provided is empty.
- Installed on a vm testbed and worked to identify the details of ip addresses. Selecting
an IP in the WUI logs screen also gets the ip information provided so it is working
well with the WUI.
Tested-by:Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Fri, 6 Aug 2021 11:16:40 +0000 (13:16 +0200)]
make.sh: Remove jwhois and replace with whois
- jwhois is no longer being maintained. The last release was from 2005 and the last commit
was in 2015. https://github.com/jonasob/jwhois
- Debian switched to another whois client which is being actively maintained.
https://github.com/rfc1036/whois
- This patch series is the removal of jwhois and the installation of whois
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:21:39 +0000 (23:21 +0200)]
slang: Update to version 2.3.2
- Update from 2.3.0 to 2.3.2
- Update rootfile
- Changelog is too large to include here. Details can be found in the changes.txt file in
the source tarball.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:21:56 +0000 (23:21 +0200)]
sshfs: Update to version 3.7.2
- Update from 3.7.1 to 3.7.2
- Update of rootfile not required
- Changelog
Release 3.7.2 (2021-06-08)
* Added a secondary check so if a mkdir request fails with EPERM an access request
will be tried - returning EEXIST if the access was successful. Fixes: https://github.com/libfuse/sshfs/issues/243 Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:22:10 +0000 (23:22 +0200)]
sslh: Update to version 1.22c
- Update from 1.7a (2013) to 1.22c (2021)
- Update rootfile
- Changelog is too large to include here. Full details can be read in the ChangeLog file
in the source tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 28 Sep 2021 21:22:32 +0000 (23:22 +0200)]
strace: Update to version 5.14
- Update from 5.11 to 5.14
- Update of rootfile not required
- Changelog
Noteworthy changes in release 5.14 (2021-09-02)
* Improvements
* Implemented decoding of memfd_secret and quotactl_fd syscalls,
introduced in Linux 5.14.
* Enhanced prctl syscall decoding.
* Enhanced decoding of IFLA_* netlink attributes.
* Enhanced decoding of MDBA_ROUTER_PATTR_* mdb router port netlink attributes.
* Updated lists of BPF_*, IORING_*, MADV_*, MOUNT_ATTR_*, SCTP_*,
and UFFD_* constants.
* Updated lists of ioctl commands from Linux 5.14.
* Bug fixes
* Fixed build using bionic libc.
Noteworthy changes in release 5.13 (2021-07-18)
* Improvements
* Print netlink data in a more structured way.
* Implemented decoding of NT_PRSTATUS and NT_FPREGSET regsets
of PTRACE_GETREGSET and PTRACE_SETREGSET requests.
* Implemented decoding of regs argument of PTRACE_GETREGS, PTRACE_GETREGS64,
PTRACE_SETREGS, PTRACE_SETREGS64, PTRACE_GETFPREGS, and PTRACE_SETFPREGS
requests.
* Implemented powerpc System Call Vectored ABI support.
* Implemented decoding of landlock_add_rule, landlock_create_ruleset,
and landlock_restrict_self syscalls introduced in Linux 5.13.
* Enhanced decoding of perf_event_open syscall.
* Updated lists of BPF_*, IORING_*, KEXEC_*, KEY_*, KVM_*, NT_*, PR_*,
PTRACE_*, RTM_*, RTPROT_*, TRAP_*, UFFD_*, UFFDIO_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 5.13.
* Portability
* On powerpc and powerpc64, linux kernel >= 2.6.23 is required.
Older versions without a decent PTRACE_GETREGS support will not work.
Noteworthy changes in release 5.12 (2021-04-26)
* Improvements
* Implemented --secontext[=full] option to display SELinux contexts.
* Implemented decoding of mount_setattr syscall introduced in Linux 5.12.
* Updated decoding of IFLA_BRPORT_* netlink attributes to match Linux 5.12.
* Updated lists of DEVCONF_*, IORING_*, KVM_*, MPOL_*, MTD_*, NFT_MSG_*,
RESOLVE_*, RTM_*, ST_*, and V4L2_* constants.
* Updated lists of ioctl commands from Linux 5.12.
* Bug fixes
* Fixed build using bionic libc.
* Portability
* Added binutils 2.36 support to --enable-mpers builds.
- More details of the above changes can be found in the ChangeLog file in the source
tarball
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Thu, 11 Nov 2021 08:14:48 +0000 (09:14 +0100)]
bind: Update to version 9.16.22
- Update from 9.11.32 to 9.16.22
- 9.11 is an ESV (Extended Support Version) that will go EOL in December 2021
9.16 is the replacement ESV whose EOL is not yet defined but will be at least 4 years
so should be supported until at least March 2024 as the 9.16 branch was started in 2020
- Update rootfile
- libuv is now required both to build the bind libraries and for the running of the
utilities.
- Changelog is difficult to define here as this is a change of branch from 9.11 to 9.16
both of which have been running in parallel. However all the changes from the start of
9.16.0 can be found in the CHANGES file in the source tarball.
- nslookup, host and dig utilities tested out by installing this on a vm testbed. All
these utilities worked as the previous version
nsupdate was not able to be tested other than confirming that running nsupdate
opened an interactive session. This utility would be good to be tested by someone
familiar with how to run it.
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Peter Müller [Sun, 10 Oct 2021 19:49:49 +0000 (21:49 +0200)]
proxy.cgi: Fix translation string mix-up
"advproxy advanced web proxy" was meant to be used in the first place,
followed by "advproxy advanced web proxy configuration", as it is done
in other CGIs.
This patch also fixes a missing German translation, and improves
translations of "one X per line" ("eines" != "eins"). :-)
Signed-off-by: Peter Müller <peter.mueller@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:29:23 +0000 (22:29 +0200)]
meson: Update to version 0.59.2
- Update from 0.58.0 to 0.59.2
- Update rootfile
- Changelog is too long to include here.
Full details can be read at https://mesonbuild.com/Release-notes-for-0-59-0.html
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:27:58 +0000 (22:27 +0200)]
bison: Update to version 3.8.2
- Update from 3.7.6 to 3.8.2
- Update rootfile
- Changelog
Noteworthy changes in release 3.8.2 (2021-09-25) [stable]
Fixed portability issues of bison on Cygwin.
Improvements in glr2.cc: add support for custom error messages (`%define
parse.error custom`), allow linking several parsers together.
Noteworthy changes in release 3.8.1 (2021-09-11) [stable]
The generation of prototypes for yylex and yyerror in Yacc mode is
breaking existing grammar files. To avoid breaking too many grammars, the
prototypes are now generated when `-y/--yacc` is used *and* the
`POSIXLY_CORRECT` environment variable is defined.
Avoid using `-y`/`--yacc` simply to comply with Yacc's file name
conventions, rather, use `-o y.tab.c`. Autoconf's AC_PROG_YACC macro uses
`-y`. Avoid it if possible, for instance by using gnulib's gl_PROG_BISON.
Noteworthy changes in release 3.8 (2021-09-07) [stable]
** Backward incompatible changes
In conformance with the recommendations of the Graphviz team
(https://marc.info/?l=graphviz-devel&m=129418103126092), `-g`/`--graph`
now generates a *.gv file by default, instead of *.dot. A transition
started in Bison 3.4.
To comply with the latest POSIX standard, in Yacc compatibility mode
(options `-y`/`--yacc`) Bison now generates prototypes for yyerror and
yylex. In some situations, this is breaking compatibility: if the user
has already declared these functions but with some differences (e.g., to
declare them as static, or to use specific attributes), the generated
parser will fail to compile. To disable these prototypes, #define yyerror
(to `yyerror`), and likewise for yylex.
** Deprecated features
Support for the YYPRINT macro is removed. It worked only with yacc.c and
only for tokens. It was obsoleted by %printer, introduced in Bison 1.50
(November 2002).
It has always been recommended to prefer `%define api.value.type foo` to
`#define YYSTYPE foo`. The latter is supported in C for compatibility
with Yacc, but not in C++. Warnings are now issued if `#define YYSTYPE`
is used in C++, and eventually support will be removed.
In C++ code, prefer value_type to semantic_type to denote the semantic
value type, which is specified by the `api.value.type` %define variable.
** New features
*** A skeleton for the D programming language
The "lalr1.d" skeleton is now officially part of Bison.
It was originally contributed by Oliver Mangold, based on Paolo Bonzini's
lalr1.java, and was improved by H. S. Teoh. Adela Vais then took over
maintenance and invested a lot of efforts to complete, test and document
it.
It now supports all the bells and whistles of the other deterministic
parsers, which include: pull/push interfaces, verbose and custom error
messages, lookahead correction, token constructors, internationalization,
locations, printers, token and symbol prefixes, etc.
Two examples demonstrate the D parsers: a basic one (examples/d/simple),
and an advanced one (examples/d/calc).
*** Option -H, --header and directive %header
The option `-H`/`--header` supersedes the option `--defines`, and the
directive %header supersedes %defines. Both `--defines` and `%defines`
are, of course, maintained for backward compatibility.
*** Option --html
Since version 2.4 Bison can be used to generate HTML reports. However it
was a two-step process: first bison must be invoked with option `--xml`,
and then xsltproc must be run to the convert the XML reports into HTML.
The new option `--html` combines these steps. The xsltproc program must
be available.
*** A C++ native GLR parser
A new version of the C++ GLR parser was added: "glr2.cc". It generates
"true C++11", instead of a C++ wrapper around a C parser as does the
existing "glr.cc" parser. As a first significant consequence, it supports
`%define api.value.type variant`, contrary to glr.cc.
It should be upward compatible in terms of interface, feature and
performance to "glr.cc". To try it out, simply use
%skeleton "glr2.cc"
It will eventually replace "glr.cc". However we need user feedback on
this skeleton. _Please_ report your results and comments about it.
*** Counterexamples
Counterexamples now show the rule numbers, and always show ε for rules
with an empty right-hand side. For instance
exp
↳ 1: e1 e2 "a"
↳ 3: ε • ↳ 1: ε
instead of
exp
↳ e1 e2 "a"
↳ • ↳ ε
*** Lookahead correction in Java
The Java skeleton (lalr1.java) now supports LAC, via the `parse.lac`
%define variable.
*** Abort parsing for memory exhaustion (C)
User actions may now use `YYNOMEM` (similar to `YYACCEPT` and `YYABORT`)
to abort the current parse with memory exhaustion.
*** Printing locations in debug traces (C)
The `YYLOCATION_PRINT(File, Loc)` macro prints a location. It is defined
when (i) locations are enabled, (ii) the default type for locations is
used, (iii) debug traces are enabled, and (iv) `YYLOCATION_PRINT` is not
already defined.
Users may define `YYLOCATION_PRINT` to cover other cases.
*** GLR traces
There were no debug traces for deferred calls to user actions. They are
logged now.
Noteworthy changes in release 3.7.6 (2021-03-08) [stable]
** Bug fixes
*** Reused Push Parsers
When a push-parser state structure is used for multiple parses, it was
possible for some state to leak from one run into the following one.
*** Fix Table Generation
In some very rare conditions, when there are many useless tokens, it was
possible to generate incorrect parsers.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Michael Tremer [Fri, 19 Nov 2021 17:44:52 +0000 (17:44 +0000)]
suricata: Include all default rules
These rules do not drop anything, but only alert when internal parts of
the engine trigger an event. This will allow us more insight on what is
happening.
Signed-off-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Wed, 20 Oct 2021 20:29:05 +0000 (22:29 +0200)]
jansson: Update to version 2.14
- Update from 2.12 to 2.14
- Update rootfile
- Changelog
Version 2.14 Released 2021-09-09
* New Features:
- Add `json_object_getn`, `json_object_setn`, `json_object_deln`, and the
corresponding `nocheck` functions. (#520, by Maxim Zhukov)
* Fixes:
- Handle `sprintf` corner cases (#537, by Tobias Stoeckmann)
* Build:
- Symbol versioning for all exported symbols (#540, by Simon McVittie)
- Fix compiler warnings (#555, by Kelvin Lee)
* Documentation:
- Small fixes (#544, #546, by @i-ky)
- Sphinx 3 compatibility (#543, by Pierce Lopez)
Version 2.13.1 Released 2020-05-07
* Build:
- Include `jansson_version_str()` and `jansson_version_cmp()` in
shared library. (#534)
- Include ``scripts/`` in tarball. (#535)
Version 2.13 Released 2020-05-05
* New Features:
- Add `jansson_version_str()` and `jansson_version_cmp()` for runtime
version checking (#465).
- Add `json_object_update_new()`, `json_object_update_existing_new()`
and `json_object_update_missing_new()` functions (#499).
- Add `json_object_update_recursive()` (#505).
* Build:
- Add ``-Wno-format-truncation`` to suppress format truncation warnings (#489).
* Bug fixes:
- Remove ``strtod`` macro definition for MinGW (#498).
- Add infinite loop check in `json_deep_copy()` (#490).
- Add ``pipe`` macro definition for MinGW (#500).
- Enhance ``JANSSON_ATTRS`` macro to support earlier C standard(C89) (#501).
- Update version detection for sphinx-build (#502).
* Documentation:
- Fix typos (#483, #494).
- Document that call the custom free function to free the return value
of `json_dumps()` if you have a custom malloc/free (#490).
- Add vcpkg installation instructions (#496).
- Document that non-blocking file descriptor is not supported on
`json_loadfd()` (#503).
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Matthias Fischer [Sat, 20 Nov 2021 12:47:31 +0000 (13:47 +0100)]
suricata: Update to 5.0.8
For details see:
https://forum.suricata.io/t/suricata-6-0-4-and-5-0-8-released/1942
"Various security, performance, accuracy and stability issues have been fixed,
including two TCP evasion issues. CVE 2021-37592 was assigned."
Changelog:
"5.0.8 -- 2021-11-16
Security #4635: tcp: crafted injected packets cause desync after 3whs
Security #4727: Bypass of Payload Detection on TCP RST with options of MD5header
Bug #4345: Failed assert in TCPProtoDetectCheckBailConditions size_ts > 1000000UL
Bug #4382: fileinfo "stored: false" even if the file is kept on disk
Bug #4626: DNP3: intra structure overflow in DNP3DecodeObjectG70V6
Bug #4628: alert count shows up as 0 when stats are disabled
Bug #4631: Protocol detection : confusion with SMB in midstream
Bug #4639: Failed assertion in SMTP SMTPTransactionComplete
Bug #4646: TCP reassembly, failed assert app_progress > last_ack_abs, both sides need to be pruned
Bug #4647: rules: Unable to find the sm in any of the sm lists
Bug #4674: rules: mix of drop and pass rules issues
Bug #4676: rules: drop rules with noalert not fully dropping
Bug #4688: detect: too many prefilter engines lead to FNs
Bug #4690: nfs: failed assert self.tx_data.files_logged > 1
Bug #4691: IPv6 : decoder event on invalid fragment length
Bug #4696: lua: file info callback returns wrong value
Bug #4718: protodetect: SEGV due to NULL ptr deref
Bug #4729: ipv6 evasions : fragmentation
Bug #4788: Memory leak in SNMP with DetectEngineState
Bug #4790: af-packet: threads sometimes get stuck in capture
Bug #4794: loopback: different AF_INET6 values per OS
Bug #4816: flow-manager: cond_t handling in emergency mode is broken
Bug #4831: SWF decompression overread
Bug #4833: Wrong list_id with transforms for http_client_body and http file_data
Optimization #3429: improve err msg for dataset rules parsing
Task #4835: libhtp 0.5.39"
Signed-off-by: Matthias Fischer <matthias.fischer@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
This patch adds a little "help" icon to the page header.
If a manual entry exists for a configuration page, the icon
appears and offers a quick way to access the wiki.
Wiki pages can be configured in the "manualpages" file.
Signed-off-by: Leo-Andres Hofmann <hofmann@leo-andres.de> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org> Tested-by: Bernhard Bitsch <bbitsch@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org>
Adolf Belka [Sat, 23 Oct 2021 16:50:00 +0000 (18:50 +0200)]
libffi: Update to version 3.4.2
- Update from 3.3 to 3.4.2
- Update rootfile - No dependency issues due to so bump
- Changelog
3.4.2 Jun-28-21
Add static trampoline support for Linux on x86_64 and ARM64.
Add support for Alibaba's CSKY architecture.
Add support for Kalray's KVX architecture.
Add support for Intel Control-flow Enforcement Technology (CET).
Add support for ARM Pointer Authentication (PA).
Fix 32-bit PPC regression.
Fix MIPS soft-float problem.
Enable tmpdir override with the $LIBFFI_TMPDIR environment variable.
Enable compatibility with MSVC runtime stack checking.
Reject float and small integer argument in ffi_prep_cif_var().
Callers must promote these types themselves.
3.3 Nov-23-19
Add RISC-V support.
New API in support of GO closures.
Add IEEE754 binary128 long double support for 64-bit Power
Default to Microsoft's 64-bit long double ABI with Visual C++.
GNU compiler uses 80 bits (128 in memory) FFI_GNUW64 ABI.
Add Windows on ARM64 (WOA) support.
Add Windows 32-bit ARM support.
Raw java (gcj) API deprecated.
Add pre-built PDF documentation to source distribution.
Many new test cases and bug fixes.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Tue, 2 Nov 2021 10:07:20 +0000 (11:07 +0100)]
gawk: Update to version 5.1.1
- Update from 5.1.0 to 5.1.1
- Update rootfile
- Changelog is quite long and detailed so the following are the high level descriptions
of the changes from the NEWS file in the source tarball. More details can be found in
the ChangeLog file in the source tarball.
Changes from 5.1.0 to 5.1.1
1. Infrastructure upgrades: Bison 3.8, Gettext 0.20.2, Automake 1.16.4,
and (will wonders never cease) Autoconf 2.71.
2. asort and asorti now allow FUNCTAB and SYMTAB as the first argument if a
second destination array is supplied. Similarly, using either array as
the second argument is now a fatal error. Additionally, using either
array as the destination for split(), match(), etc. also causes a
fatal error.
3. The new -I/--trace option prints a trace of the byte codes as they
are executed.
4. A number of subtle bugs relating to MPFR mode that caused differences
between regular operation and MPFR mode have been fixed.
5. The API now handles MPFR/GMP values slightly differently, requiring
different memory management for those values. See the manual for the
details if you have an extension using those values. As a result,
the minor version was incremented.
6. $0 and the fields are now cleared before starting a BEGINFILE rule.
7. The duplication of m4 and build-aux directories between the main
directory and the extension directory has been removed. This
simplifies the distribution.
8. The test suite has been improved, making it easier to run the entire
suite with -M. Use `GAWK_TEST_ARGS=-M make check' to do so.
9. Profiling and pretty-printing output has been modified slightly so
that functions are presented in a reasonable order with respect
to the namespaces that contain them.
10. Several example programs in the manual have been updated to their
modern POSIX equivalents.
11. A number of examples in doc/gawkinet.texi have been updated for
current times. Thanks to Juergen Kahrs for the work.
12. Handling of Infinity and NaN values has been improved.
13. There has been a general tightening up of the use of const and
of types.
14. The "no effect" lint warnings have been fixed up and now behave
more sanely.
15. The manual has been updated with much more information about what is
and is not a bug, and the changes in the gawk mailing lists.
16. The behavior of strongly-typed regexp constants when passed as the
third argument to sub() or gsub() has been clarified in the code and
in the manual.
17. Similar to item #4 above, division by zero is now fatal in MPFR
mode, as it is in regular mode.
18. There have been numerous minor code cleanups and bug fixes. See the
ChangeLog for details.
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Sun, 26 Sep 2021 10:37:00 +0000 (12:37 +0200)]
libxcrypt: Update to version 4.4.26
- v2 version is to extend from 4.4.25 to 4.4.26
- Update from 4.4.23 to 4.4.26
- Update of rootfile not required
- Changelog
Version 4.4.26
* Fix compilation on systems with GCC >= 10, that do not support
declarations with __attribute__((symver)).
Version 4.4.25
* Add support for Python 3.11 in the configure script.
* Stricter checking of invalid salt characters (issue #135).
Hashed passphrases are always entirely printable ASCII, and do
not contain any whitespace or the characters ':', ';', '*', '!',
or '\'. (These characters are used as delimiters and special
markers in the passwd(5) and shadow(5) files.)
Version 4.4.24
* Add hash group for Debian in lib/hashes.conf.
Debian has switched to use the yescrypt hashing algorithm as
the default for new user passwords, so we should add a group
for this distribution.
* Overhaul the badsalt test.
Test patterns are now mostly generated rather than manually coded
into a big table. Not reading past the end of the “setting” part
of the string is tested more thoroughly (this would have caught the
sunmd5 $$ bug if it had been available at the time).
Test logs are tidier.
* Add ‘test-programs’ utility target to Makefile.
It is sometimes useful to compile all the test programs but not run
them. Add a Makefile target that does this.
* Fix incorrect bcrypt-related ifdeffage in test/badsalt.c.
The four variants of bcrypt are independently configurable, but the
badsalt tests for them were all being toggled by INCLUDE_bcrypt,
which is only the macro for the $2b$ variant.
* Fix bigcrypt-related test cases in test/badsalt.c.
The test spec was only correct when both or neither of bigcrypt and
descrypt were enabled.
* Detect ASan in configure and disable incompatible tests.
ASan’s “interceptors” for crypt and crypt_r have a semantic conflict
with libxcrypt, requiring a few tests to be disabled for builds with
-fsanitize-address. See commentary in test/crypt-badargs.c for an
explanation of the conflict, and the commentary in
build-aux/zw_detect_asan.m4 for why a configure test is required.
* Fix several issues found by Covscan in the testsuite. These include:
- CWE-170: String not null terminated (STRING_NULL)
- CWE-188: Reliance on integer endianness (INCOMPATIBLE_CAST)
- CWE-190: Unintentional integer overflow (OVERFLOW_BEFORE_WIDEN)
- CWE-569: Wrong sizeof argument (SIZEOF_MISMATCH)
- CWE-573: Missing varargs init or cleanup (VARARGS)
- CWE-687: Argument cannot be negative (NEGATIVE_RETURNS)
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>
Stefan Schantl [Thu, 15 Jul 2021 10:07:37 +0000 (12:07 +0200)]
fwhosts.cgi: Fix check to limit amount of ports in custom service groups.
iptables multiport only supports up to 15 elements for each protocol (TCP or UDP).
That can be single ports or portranges (they count doubble).
This commit extends the check to calculate the amount of used TCP and/or
UDP ports of all existing entries in a group, by increasing the amount
for the service which should be added.
If the amount of ports for TCP or UDP ports become greater than the
limit of 15 the error message will be displayed.
Fixes #11323.
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org>
Stefan Schantl [Sat, 23 Oct 2021 19:16:25 +0000 (21:16 +0200)]
ddns: Add upstream patch to fix a typo for FreeDNSAfraid.org provider
Signed-off-by: Stefan Schantl <stefan.schantl@ipfire.org> Reported-by: Bernhard Bitsch <bbitsch@ipfire.org> Reviewed-by: Bernhard Bitsch <bbitsch@ipfire.org> Tested-by: Bernhard Bitsch <bbitsch@ipfire.org>
Adolf Belka [Mon, 27 Sep 2021 15:33:59 +0000 (17:33 +0200)]
openssh: Update to version 8.8p1
- Update from 8.7p1 to 8.8p1
- Update of rootfile not required
- Changelog
OpenSSH 8.8p1
Future deprecation notice
A near-future release of OpenSSH will switch scp(1) from using the
legacy scp/rcp protocol to using SFTP by default.
Legacy scp/rcp performs wildcard expansion of remote filenames (e.g.
"scp host:* .") through the remote shell. This has the side effect of
requiring double quoting of shell meta-characters in file names
included on scp(1) command-lines, otherwise they could be interpreted
as shell commands on the remote side.
This creates one area of potential incompatibility: scp(1) when using
the SFTP protocol no longer requires this finicky and brittle quoting,
and attempts to use it may cause transfers to fail. We consider the
removal of the need for double-quoting shell characters in file names
to be a benefit and do not intend to introduce bug- compatibility for
legacy scp/rcp in scp(1) when using the SFTP protocol.
Another area of potential incompatibility relates to the use of remote
paths relative to other user's home directories, for example -
"scp host:~user/file /tmp". The SFTP protocol has no native way to
expand a ~user path. However, sftp-server(8) in OpenSSH 8.7 and later
support a protocol extension "expand-path@openssh.com" to support
this.
Security
sshd(8) from OpenSSH 6.2 through 8.7 failed to correctly initialise
supplemental groups when executing an AuthorizedKeysCommand or
AuthorizedPrincipalsCommand, where a AuthorizedKeysCommandUser or
AuthorizedPrincipalsCommandUser directive has been set to run the
command as a different user. Instead these commands would inherit
the groups that sshd(8) was started with.
Depending on system configuration, inherited groups may allow
AuthorizedKeysCommand/AuthorizedPrincipalsCommand helper programs to
gain unintended privilege.
Neither AuthorizedKeysCommand nor AuthorizedPrincipalsCommand are
enabled by default in sshd_config(5).
Potentially-incompatible changes
This release disables RSA signatures using the SHA-1 hash algorithm
by default. This change has been made as the SHA-1 hash algorithm is
cryptographically broken, and it is possible to create chosen-prefix
hash collisions for <USD$50K [1]
For most users, this change should be invisible and there is
no need to replace ssh-rsa keys. OpenSSH has supported RFC8332
RSA/SHA-256/512 signatures since release 7.2 and existing ssh-rsa keys
will automatically use the stronger algorithm where possible.
Changes since OpenSSH 8.7p1
This release is motivated primarily by the above deprecation and
security fix.
New features
* ssh(1): allow the ssh_config(5) CanonicalizePermittedCNAMEs
directive to accept a "none" argument to specify the default
behaviour.
Bugfixes
* scp(1): when using the SFTP protocol, continue transferring files
after a transfer error occurs, better matching original scp/rcp
behaviour.
* ssh(1): fixed a number of memory leaks in multiplexing,
* ssh-keygen(1): avoid crash when using the -Y find-principals
command.
* A number of documentation and manual improvements, including
bz#3340, PR139, PR215, PR241, PR257
Portability
* ssh-agent(1): on FreeBSD, use procctl to disable ptrace(2)
* ssh(1)/sshd(8): some fixes to the pselect(2) replacement
compatibility code. bz#3345
Signed-off-by: Adolf Belka <adolf.belka@ipfire.org>
Adolf Belka [Wed, 10 Nov 2021 11:09:29 +0000 (12:09 +0100)]
openvpn: Update to version 2.5.4
- Update from 2.5.0 to 2.5.4
- Update rootfile
- Tested new version in vm testbed. Openvpn server successfully started.
Client connections working with 2.5.0 also successfully worked with 2.5.4
- Changelog
Overview of changes in 2.5.4
Bugfixes
- fix prompting for password on windows console if stderr redirection
is in use - this breaks 2.5.x on Win11/ARM, and might also break
on Win11/adm64 when released.
- fix setting MAC address on TAP adapters (--lladdr) to use sitnl
(was overlooked, and still used "ifconfig" calls)
- various improvements for man page building (rst2man/rst2html etc)
- minor bugfix with IN6_IS_ADDR_UNSPECIFIED() use (breaks build on
at least one platform strictly checking this)
- fix minor memory leak under certain conditions in add_route() and
add_route_ipv6()
User-visible Changes
- documentation improvements
- copyright updates where needed
- better error reporting when win32 console access fails
New features
- also build man page on Windows builds
Overview of changes in 2.5.3
Bugfixes
- CVE-2121-3606
see https://community.openvpn.net/openvpn/wiki/SecurityAnnouncements
OpenVPN windows builds could possibly load OpenSSL Config files from
world writeable locations, thus posing a security risk to OpenVPN.
As a fix, disable OpenSSL config loading completely on Windows.
- disable connect-retry backoff for p2p (--secret) instances
(Trac #1010, #1384)
- fix build with mbedtls w/o SSL renegotiation support
- Fix SIGSEGV (NULL deref) receiving push "echo" (Trac #1409)
- MSI installers: properly schedule reboot in the end of installation
- fix small memory leak in free_key_ctx for auth_token
User-visible Changes
- update copyright messages in files and --version output
New features
- add --auth-token-user option (for --auth-token deployments without
--auth-user-pass in client config)
- improve MSVC building for Windows
- official MSI installers will now contain arm64 drivers and binaries
(x86, amd64, arm64)
Overview of changes in 2.5.2
Bugfixes
- CVE-2020-15078
see https://community.openvpn.net/openvpn/wiki/SecurityAnnouncements
This bug allows - under very specific circumstances - to trick a
server using delayed authentication (plugin or management) into
returning a PUSH_REPLY before the AUTH_FAILED message, which can
possibly be used to gather information about a VPN setup.
In combination with "--auth-gen-token" or an user-specific token auth
solution it can be possible to get access to a VPN with an
otherwise-invalid account.
- restore pushed "ping" settings correctly on a SIGUSR1 restart
- avoid generating unecessary mbed debug messages - this is actually
a workaround for an mbedTLS 2.25 bug when using Curve25519 and Curve448
ED curves - mbedTLS crashes on preparing debug infos that we do not
actually need unless running with "--verb 8"
- do not print inlined (<dh>...</dh>) Diffie Hellman parameters to log file
- fix Linux/SITNL default route lookup in case of multiple routing tables
with more than one default route present (always use "main table" for now)
- Fix CRL file handling in combination with chroot
User-visible Changes
- OpenVPN will now refuse to start if CRL file is not present at startup
time. At "reload time" absense of the CRL file is still OK (and the
in memory copy is used) but at startup it is now considered an error.
New features
- printing of the TLS ciphers negotiated has been extended, especially
displaying TLS 1.3 and EC certificates more correctly.
Overview of changes in 2.5.1
New features
- "echo msg" support, to enable the server to pushed messages that are
then displayed by the client-side GUI. See doc/gui-notes.txt and
doc/management-notes.txt.
Supported by the Windows GUI shipped in 2.5.1, not yet supported by
Tunnelblick and the Android GUI.
User-visible Changes
- make OPENVPN_PLUGIN_ENABLE_PF plugin failures FATAL - if a plugin offers
to set the "openvpn packet filter", and returns a failure when requested
to, OpenVPN 2.5.0 would crash trying to clean up not-yet-initialized
structure members. Since PF is going away in 2.6.0, this is just turning
the crash into a well-defined program abort, and no further effort has
been spent in rewriting the PF plugin error handling (see trac #1377).
Documentation
- rework sample-plugins/defer/simple.c - this is an extensive rewrite
of the plugin to bring code quality to acceptable standards and add
documentation on the various plugin API aspects. Since it's just
example code, filed under "Documentation", not under "Bugfix".
- various man page improvements.
- clarify ``--block-ipv6`` intent and direction
Bugfixes
- fix installation of openvpn.8 manpage on systems without docutils.
- Windows: fix DNS search list setup for domains with "-" chars.
- Fix tls-auth mismatch OCC message when tls-cryptv2 is used.
- Windows: Skip DHCP renew with Wintun adapter (Wintun does not support
DHCP, so this was just causing an - harmless - error and needless delay).
- Windows: Remove 1 second delay before running netsh - speeds up
interface init for wintun setups not using the interactive service.
- Windows: Fix too early argv freeing when registering DNS - this would
cause a client side crash on Windows if ``register-dns`` is used,
and the interactive service is not used.
- Android: Zero initialise msghdr prior to calling sendmesg.
- Fix line number reporting on config file errors after <inline> segments
(see Trac #1325).
- Fix port-share option with TLS-Crypt v2.
- tls-crypt-v2: also preload tls-crypt-v2 keys (if --persist-key), otherwise
dropping privs on the server would fail.
- tls-crypt-v2: fix server memory leak (about 600 bytes per connecting
client with tls-crypt-v2)
- rework handling of server-pushed ``--auth-token`` in combination with
``--auth-nocache`` on reconnection / TLS renegotiation events. This
used to "forget" to update new incoming token after a reconnection event
(leading to failure to reauth some time later) and now works in all
tested cases.
Tested-by: Adolf Belka <adolf.belka@ipfire.org> Signed-off-by: Adolf Belka <adolf.belka@ipfire.org> Reviewed-by: Michael Tremer <michael.tremer@ipfire.org> Reviewed-by: Peter Müller <peter.mueller@ipfire.org>