]>
git.ipfire.org Git - thirdparty/systemd.git/log
Lennart Poettering [Tue, 5 May 2020 17:36:21 +0000 (19:36 +0200)]
update TODO
Lennart Poettering [Tue, 5 May 2020 17:33:27 +0000 (19:33 +0200)]
man: document homed key management
Fixes: #15235
Zbigniew Jędrzejewski-Szmek [Thu, 7 May 2020 11:10:25 +0000 (13:10 +0200)]
Revert "Add Kensington SlimBlade Trackball"
This reverts commit
8049c79b654f9c00da883423813ec25b7b54f3d6 .
Daan De Meyer [Thu, 7 May 2020 09:51:02 +0000 (11:51 +0200)]
resolved: Fix build error due to missing include.
gaurav [Thu, 7 May 2020 07:55:31 +0000 (03:55 -0400)]
netlink socket correct check (#15720)
Lennart Poettering [Wed, 6 May 2020 20:43:54 +0000 (22:43 +0200)]
homectl: show disk free in percent in 'inspect'
Zbigniew Jędrzejewski-Szmek [Thu, 7 May 2020 07:47:19 +0000 (09:47 +0200)]
Merge pull request #15733 from benjarobin/fix_warn_ndebug
Allow to build without any warning with NDEBUG defined + Bugfix
Benjamin Robin [Wed, 6 May 2020 19:24:05 +0000 (21:24 +0200)]
tree-wide: Workaround -Wnonnull GCC bug
See issue #6119
Lennart Poettering [Wed, 6 May 2020 15:54:35 +0000 (17:54 +0200)]
homed: open up home dir Acquire operation to unpriv clients
Apparently unpriv clients expect to be able to auth via PAM. Kinda
sucks. But it is what it is. Hence open this up.
This shouldn't be too bad in effect since clients after all need to
provide security creds for unlocking the home dir, in order to misuse
this.
Fixes: #15072
Daan De Meyer [Wed, 6 May 2020 17:10:59 +0000 (19:10 +0200)]
resolved: Break include cycles
Benjamin Robin [Wed, 6 May 2020 21:02:39 +0000 (23:02 +0200)]
meson: Do not drop warnings (unused variable) when NDEBUG is defined
This is no longer needed, since there is now no warning with NDEBUG
defined
Benjamin Robin [Wed, 6 May 2020 20:58:24 +0000 (22:58 +0200)]
resize-fs: Use xsprintf instead of snprintf
Benjamin Robin [Wed, 6 May 2020 18:32:27 +0000 (20:32 +0200)]
test: Use assert_se() where variables are only checked by assert
Allow to build without any warning with NDEBUG defined
Benjamin Robin [Wed, 6 May 2020 18:30:43 +0000 (20:30 +0200)]
tree-wide: Fix, replace assert() by assert_se() when there is side effect
Benjamin Robin [Wed, 6 May 2020 18:29:31 +0000 (20:29 +0200)]
tree-wide: Mark as _unused_ variables that are only used in assert()
Allow to build without any warning with NDEBUG defined
Zbigniew Jędrzejewski-Szmek [Wed, 6 May 2020 20:45:29 +0000 (22:45 +0200)]
Merge pull request #15735 from poettering/pam-snippet-update
Slightly update our shipped and suggested PAM snippets, so that pam_systemd_home.so is more likely to just work
Zbigniew Jędrzejewski-Szmek [Wed, 6 May 2020 20:38:25 +0000 (22:38 +0200)]
Merge pull request #15727 from poettering/systemctl-list-sockets-tweak
systemctl: some table output tweaks
Lennart Poettering [Wed, 6 May 2020 20:28:37 +0000 (22:28 +0200)]
man: bring example PAM snippet of pam_systemd and pam_systemd_home back in sync
Let's make it the same snippet, just highlight different lines.
Lennart Poettering [Wed, 6 May 2020 20:26:54 +0000 (22:26 +0200)]
man: highlight relevant lines in pam_systemd_home.so example PAM snippet
let's do this like we do in the NSS module man pages.
Lennart Poettering [Wed, 6 May 2020 20:25:34 +0000 (22:25 +0200)]
login: include pam_systemd_home.so in the default PAM snippet we ship for user@.service
Let's make sure systemd-homed works out-of-the box as well as possible.
Balint Reczey [Tue, 5 May 2020 19:24:53 +0000 (21:24 +0200)]
test: Skip test-boot-timestamps on permission denied
In containers even root can be denied to access the needed files.
Bastien Nocera [Tue, 5 May 2020 14:38:37 +0000 (16:38 +0200)]
hwdb: Force "mouse" type on Logitech Ultrathin Touch Mouse
Closes: #15657
Lennart Poettering [Wed, 6 May 2020 13:37:33 +0000 (15:37 +0200)]
systemctl: underline whole rows, gapless
Just some tweaking of the output.
Lennart Poettering [Wed, 6 May 2020 13:36:50 +0000 (15:36 +0200)]
format-table: support coloring the gap right of each cell individually
This is useful for underlining a whole row of cells: previously we
couldn't underline the gap. Now we can.
Lennart Poettering [Wed, 6 May 2020 12:56:37 +0000 (14:56 +0200)]
systemctl: ensure underline for "list-unit-files" empty cells
Lennart Poettering [Wed, 6 May 2020 12:48:54 +0000 (14:48 +0200)]
systemctl: let's tweak how we synthesize a cell for activating unit
Let's create a string cell for the unit if possible (since there can
only be one unit right now, and the JSON alternative output then
generates a string instead of an array for us), an empty cell if empty.
Lennart Poettering [Wed, 6 May 2020 12:48:14 +0000 (14:48 +0200)]
systemctl: change column name in "list-sockets" out from "units" to "unit"
All our other tables call the field in singular, hence let's do so here,
too.
Lennart Poettering [Wed, 6 May 2020 12:47:46 +0000 (14:47 +0200)]
systemctl: show empty cells as '-'
This is mostly relevant for "systemct list-sockets" which can have empty
cells for the activating unit.
Lennart Poettering [Wed, 6 May 2020 12:46:37 +0000 (14:46 +0200)]
format-table: display an empty strv cell the same way as an empty cell
An empty list conceptually is very close to null, hence let's show it
the same way, i.e. using the defined "empty" string, and greyed out.
Zbigniew Jędrzejewski-Szmek [Wed, 6 May 2020 13:02:38 +0000 (15:02 +0200)]
resolve: fix type of parameter and update man page
The "a" got dropped in
eff7c2d3c905dec9ea4e1d5e53a0efd6af7d3d26 .
Zbigniew Jędrzejewski-Szmek [Wed, 6 May 2020 13:00:07 +0000 (15:00 +0200)]
Merge pull request #15473 from keszybz/bus-introspection
Eric Anderson [Sat, 2 May 2020 22:54:24 +0000 (15:54 -0700)]
socket-proxy: Support exit-on-idle
This adds the --exit-idle-time argument that causes
systemd-socket-proxyd to exit when there has been an idle period. An
open connection prevents the idle period from starting, even if there is
no activity on that connection.
When combined with another service that uses StopWhenUnneeded=, the
proxy exiting can trigger a resource-intensive process to exit. So
although the proxy may consume minimal resources, significant resources
can be saved indirectly.
Fixes #2106
Gergely Polonkai [Wed, 6 May 2020 08:49:39 +0000 (08:49 +0000)]
Update the rsync command in CONVERTING_TO_HOMED
The old version of this command will delete everything under the new home directory (including `.identity`), rendering the directory unusable with homed.
Daan De Meyer [Tue, 28 Apr 2020 17:04:33 +0000 (19:04 +0200)]
sd-bus: Add a nicer way of specifying sd-bus vtable method arguments
SD_BUS_NAMES_WITH_ARGS is a less error-prone way of specifying D-Bus
method arguments.
Evgeny Vereshchagin [Tue, 5 May 2020 11:10:56 +0000 (11:10 +0000)]
build-system: bring back 'nonnull'
Having taken a look at https://github.com/systemd/systemd/runs/
645252074 ?check_suite_focus=true
where fuzz-journal-remote failed with
```
AddressSanitizer:DEADLYSIGNAL
=================================================================
==16==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000000 (pc 0x7f864f98948e bp 0x7ffde5c6b7c0 sp 0x7ffde5c6b560 T0)
==16==The signal is caused by a READ memory access.
==16==Hint: address points to the zero page.
SCARINESS: 10 (null-deref)
#0 0x7f864f98948e in output_short /work/build/../../src/systemd/src/shared/logs-show.c
#1 0x7f864f984624 in show_journal_entry /work/build/../../src/systemd/src/shared/logs-show.c:1154:15
#2 0x7f864f984b63 in show_journal /work/build/../../src/systemd/src/shared/logs-show.c:1239:21
#3 0x4cabab in LLVMFuzzerTestOneInput /work/build/../../src/systemd/src/fuzz/fuzz-journal-remote.c:67:21
#4 0x51fd16 in fuzzer::Fuzzer::ExecuteCallback(unsigned char const*, unsigned long) /src/libfuzzer/FuzzerLoop.cpp:556:15
#5 0x51c330 in fuzzer::Fuzzer::RunOne(unsigned char const*, unsigned long, bool, fuzzer::InputInfo*, bool*) /src/libfuzzer/FuzzerLoop.cpp:470:3
#6 0x523700 in fuzzer::Fuzzer::ReadAndExecuteSeedCorpora(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:765:7
#7 0x5246cd in fuzzer::Fuzzer::Loop(std::__1::vector<fuzzer::SizedFile, fuzzer::fuzzer_allocator<fuzzer::SizedFile> >&) /src/libfuzzer/FuzzerLoop.cpp:792:3
#8 0x4de3d1 in fuzzer::FuzzerDriver(int*, char***, int (*)(unsigned char const*, unsigned long)) /src/libfuzzer/FuzzerDriver.cpp:824:6
#9 0x4cfb47 in main /src/libfuzzer/FuzzerMain.cpp:19:10
#10 0x7f864e69782f in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x2082f)
#11 0x41f2a8 in _start (out/fuzz-journal-remote+0x41f2a8)
AddressSanitizer can not provide additional info.
SUMMARY: AddressSanitizer: SEGV /work/build/../../src/systemd/src/shared/logs-show.c in output_short
==16==ABORTING
MS: 0 ; base unit:
0000000000000000000000000000000000000000
0x44,0x3d,0xa,0x5f,0x5f,0x52,0x45,0x41,0x4c,0x54,0x49,0x4d,0x45,0x5f,0x54,0x49,0x4d,0x45,0x53,0x54,0x41,0x4d,0x50,0x3d,0x31,0xa,0xa,
D=\x0a__REALTIME_TIMESTAMP=1\x0a\x0a
artifact_prefix='./'; Test unit written to ./crash-
d635b9dd31cceff3c912fd45e1a58d7e90f0ad73
Base64: RD0KX19SRUFMVElNRV9USU1FU1RBTVA9MQoK
```
I was wondering why it hadn't been caught by the compiler even though clang should have failed to compile it with
```
../src/shared/logs-show.c:624:25: warning: null passed to a callee that requires a non-null argument [-Wnonnull]
print_multiline(f, 4 + fieldlen + 1, 0, OUTPUT_FULL_WIDTH, 0, false,
^
../src/shared/logs-show.c:161:24: note: callee declares array parameter as static here
size_t highlight[static 2]) {
^ ~~~~~~~~~~
../src/shared/logs-show.c:1239:21: warning: null passed to a callee that requires a non-null argument [-Wnonnull]
r = show_journal_entry(f, j, mode, n_columns, flags, NULL, NULL, ellipsized);
^ ~~~~
../src/shared/logs-show.c:1133:30: note: callee declares array parameter as static here
const size_t highlight[static 2],
^ ~~~~~~~~~~
2 warnings generated.
```
Given that judging by https://github.com/systemd/systemd/issues/13039 it doesn't seem to be
the first time issues like that have been missed I think it would be better to turn nonnull on
and get around false positives on a case-by-case basis with DISABLE_WARNING_NONNULL .. REENABLE_WARNING
Reopens https://github.com/systemd/systemd/issues/6119
Lennart Poettering [Tue, 5 May 2020 19:46:56 +0000 (21:46 +0200)]
sysusers: be extra careful when locking accounts
Let's use "!*" instead of "!!" as invalid password string.
Generally, any invalid password string can be used to for locking an
account, according to shadow(5). To temporarily lock a password of an
account it is commonly implemented to prefix the original password with
a single "!", so that it can later on be unlocked again by removing the
"!", restoring the original password. Thus, the "!" marker is an
indicator for a locked password; the act of prefixing "!" to a
password string is the locking operation; and the removal of a "!"
prefix is the unlock operation. (This is also suggested in shadow(5)).
If we want to entirely lock an account we previously used "!!" as
password string. This is nice since it indicates the password is locked.
However, it is less than ideal, since applying the password unlock
operation once will change the string to "!", which is still a locked
password. Unlocking the password a second time will result in "", i.e.
the empty password, which will in many cases allow logging in without
password. And that's a problem. Hopefully, tools do not allow such
duplicate unlocking, but it's still not a nice property.
By changing our password string to "!*" we get different behaviour: the
password will appear locked. When it is unlocked the password is "*"
which is an invalid password. In that case the password is hence
unlocked but invalid, which is a much better state to be in than the
above.
This is paranoia hardening. Not more. There's no report that anyone
every unlocked an account twice and people could log in.
Zbigniew Jędrzejewski-Szmek [Tue, 5 May 2020 21:03:36 +0000 (23:03 +0200)]
man: update login1(5) for SetType()
Added in
db72aea4a952cdfdef51eda03408d7c4a11e7359 .
Zbigniew Jędrzejewski-Szmek [Sun, 3 May 2020 08:19:53 +0000 (10:19 +0200)]
man: add stub for home1(5)
Zbigniew Jędrzejewski-Szmek [Sun, 3 May 2020 08:05:06 +0000 (10:05 +0200)]
homed: convert to the new scheme and add --bus-introspect
Lennart Poettering [Wed, 6 May 2020 06:19:37 +0000 (08:19 +0200)]
Merge pull request #15692 from keszybz/preset-cleanup
Make systemctl list-unit-files output more useful
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 19:04:43 +0000 (21:04 +0200)]
man: add description of org.freedesktop.LogControl1
I'm not sure if the LogTarget property is sufficiently general to be made into
a property that can be generally implemented. It is very closely tied to the internal
systemd logic. The other two seem fine thoough.
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 18:12:03 +0000 (20:12 +0200)]
meson: add man/update-dbus-docs target
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 15:55:11 +0000 (17:55 +0200)]
man: drop LogLevel from resolve1(5)
Removed in
4c4520789d2bfa3fa51b38b826cac2efb5a4d252 .
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 15:54:28 +0000 (17:54 +0200)]
man: drop CanMultiSession from documention
Removed in
8f8cc84ba4612e74cd1e26898c6816e6e60fc4e9 .
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 10:08:10 +0000 (12:08 +0200)]
man: use --bus-introspect to autogenerate dbus api docs
This has the advantage that the executables are always in place and we don't
need any units to exist on the bus, so we can eventually hook this up into
a normal build system. (Probably as a build time check.)
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 10:09:07 +0000 (12:09 +0200)]
update-dbus-docs: use executables in build/
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 21:50:31 +0000 (23:50 +0200)]
pid1: add --bus-introspect
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 21:50:12 +0000 (23:50 +0200)]
pid1: convert to the new scheme
In all the other cases, I think the code was clearer with the static table.
Here, not so much. And because of the existing dump code, the vtables cannot
be made static and need to remain exported. I still think it's worth to do the
change to have the cmdline introspection, but I'm disappointed with how this
came out.
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 12:21:46 +0000 (14:21 +0200)]
machined: convert to the new scheme and add --bus-introspect
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 12:10:33 +0000 (14:10 +0200)]
localed: convert to the new scheme and add --bus-introspect
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 12:08:16 +0000 (14:08 +0200)]
hostnamed: convert to the new scheme and add --bus-introspect
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 10:46:23 +0000 (12:46 +0200)]
bus-introspect: list the interfaces with "list"
The output is not very well formatted, but it is still useful when
testing this.
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 10:45:47 +0000 (12:45 +0200)]
resolved: convert to the new scheme
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 10:14:09 +0000 (12:14 +0200)]
timedated: convert to the new scheme and add --bus-introspect
Zbigniew Jędrzejewski-Szmek [Thu, 23 Apr 2020 07:59:03 +0000 (09:59 +0200)]
units: change description of systemd-logind.service
"Login Service" doesn''t explain much, esp. considering that logind is actually is
for logins. I think "User Login Management" is better, but not that great either.
Suggestions welcome.
Zbigniew Jędrzejewski-Szmek [Tue, 28 Apr 2020 15:55:34 +0000 (17:55 +0200)]
importd,logind: add --bus-introspect= option
Zbigniew Jędrzejewski-Szmek [Wed, 15 Apr 2020 15:19:53 +0000 (17:19 +0200)]
bus-util: add wrapper for interface introspection
Zbigniew Jędrzejewski-Szmek [Wed, 22 Apr 2020 23:00:07 +0000 (01:00 +0200)]
logind: convert to the new scheme
Zbigniew Jędrzejewski-Szmek [Fri, 24 Apr 2020 08:02:00 +0000 (10:02 +0200)]
importd: convert to the new scheme
Zbigniew Jędrzejewski-Szmek [Wed, 15 Apr 2020 15:21:23 +0000 (17:21 +0200)]
sd-bus: add helper struct for interface definitions
The idea is to have a static table that defines the dbus API. The vtable is
defined right next to the interface name and path because they are logically
connected.
Zbigniew Jędrzejewski-Szmek [Mon, 4 May 2020 18:01:52 +0000 (20:01 +0200)]
systemctl: do not show preset state for "static"/"alias"/"generated"/"transient" units
This modifies list-unit-files and status.
The output of list-unit-files would contain various lines with "static
disabled", which is just misleading, because systemctl preset will not touch
those files, so the preset configuration is not relevant. Similarly, for
"generated" and "transient" units, preset state is irrelevant. For "alias"
lines, the preset for the alias target would be used. In all cases let's just
skip preset status in those cases.
Diff for a a Fedora rawhide container:
--- $ systemctl --root=/tmp/root2 list-unit-files
+++ $ build/systemctl --root=/tmp/root2 list-unit-files
@@ -1,125 +1,125 @@
UNIT FILE STATE VENDOR PRESET
-proc-sys-fs-binfmt_misc.automount static disabled
-dev-hugepages.mount static disabled
-dev-mqueue.mount static disabled
-proc-fs-nfsd.mount static disabled
+proc-sys-fs-binfmt_misc.automount static
+dev-hugepages.mount static
+dev-mqueue.mount static
+proc-fs-nfsd.mount static
proc-sys-fs-binfmt_misc.mount disabled disabled
-sys-fs-fuse-connections.mount static disabled
-sys-kernel-config.mount static disabled
-sys-kernel-debug.mount static disabled
-sys-kernel-tracing.mount static disabled
-tmp.mount static disabled
-var-lib-nfs-rpc_pipefs.mount static disabled
+sys-fs-fuse-connections.mount static
+sys-kernel-config.mount static
+sys-kernel-debug.mount static
+sys-kernel-tracing.mount static
+tmp.mount static
+var-lib-nfs-rpc_pipefs.mount static
ostree-finalize-staged.path disabled enabled
-systemd-ask-password-console.path static disabled
-systemd-ask-password-plymouth.path static disabled
-systemd-ask-password-wall.path static disabled
+systemd-ask-password-console.path static
+systemd-ask-password-plymouth.path static
+systemd-ask-password-wall.path static
abrt-journal-core.service enabled enabled
abrt-oops.service enabled enabled
abrt-pstoreoops.service disabled disabled
abrt-vmcore.service enabled enabled
abrt-xorg.service enabled enabled
abrtd.service enabled enabled
-anaconda-direct.service static disabled
-anaconda-nm-config.service static disabled
-anaconda-noshell.service static disabled
-anaconda-pre.service static disabled
-anaconda-shell@.service static disabled
-anaconda-sshd.service static disabled
-anaconda-tmux@.service static disabled
-anaconda.service static disabled
+anaconda-direct.service static
+anaconda-nm-config.service static
+anaconda-noshell.service static
+anaconda-pre.service static
+anaconda-shell@.service static
+anaconda-sshd.service static
+anaconda-tmux@.service static
+anaconda.service static
arp-ethers.service disabled disabled
atd.service enabled enabled
auditd.service enabled enabled
-auth-rpcgss-module.service static disabled
+auth-rpcgss-module.service static
autofs.service disabled disabled
-autovt@.service enabled disabled
-blivet.service static disabled
+autovt@.service alias
+blivet.service static
blk-availability.service disabled disabled
bluetooth.service enabled enabled
-btattach-bcm@.service static disabled
+btattach-bcm@.service static
certmonger.service disabled disabled
-chrony-dnssrv@.service static disabled
+chrony-dnssrv@.service static
chrony-wait.service disabled disabled
chronyd.service enabled enabled
-clean-mount-point@.service static disabled
-cockpit-motd.service static disabled
-cockpit-wsinstance-http-redirect.service static disabled
-cockpit-wsinstance-http.service static disabled
-cockpit-wsinstance-https-factory@.service static disabled
-cockpit-wsinstance-https@.service static disabled
-cockpit.service static disabled
+clean-mount-point@.service static
+cockpit-motd.service static
+cockpit-wsinstance-http-redirect.service static
+cockpit-wsinstance-http.service static
+cockpit-wsinstance-https-factory@.service static
+cockpit-wsinstance-https@.service static
+cockpit.service static
console-getty.service disabled disabled
-container-getty@.service static disabled
+container-getty@.service static
dbus-broker.service enabled enabled
dbus-daemon.service disabled disabled
-dbus-org.bluez.service enabled disabled
-dbus-org.fedoraproject.FirewallD1.service enabled disabled
-dbus-org.freedesktop.home1.service static disabled
-dbus-org.freedesktop.hostname1.service static disabled
-dbus-org.freedesktop.locale1.service static disabled
-dbus-org.freedesktop.login1.service static disabled
-dbus-org.freedesktop.ModemManager1.service enabled disabled
-dbus-org.freedesktop.nm-dispatcher.service enabled disabled
-dbus-org.freedesktop.portable1.service static disabled
-dbus-org.freedesktop.timedate1.service static disabled
-dbus.service enabled disabled
+dbus-org.bluez.service alias
+dbus-org.fedoraproject.FirewallD1.service alias
+dbus-org.freedesktop.home1.service alias
+dbus-org.freedesktop.hostname1.service alias
+dbus-org.freedesktop.locale1.service alias
+dbus-org.freedesktop.login1.service alias
+dbus-org.freedesktop.ModemManager1.service alias
+dbus-org.freedesktop.nm-dispatcher.service alias
+dbus-org.freedesktop.portable1.service alias
+dbus-org.freedesktop.timedate1.service alias
+dbus.service alias
dbxtool.service enabled enabled
debug-shell.service disabled disabled
-dm-event.service static enabled
+dm-event.service static
dmraid-activation.service enabled enabled
-dnf-makecache.service static disabled
+dnf-makecache.service static
dnsmasq.service disabled disabled
-dracut-cmdline.service static disabled
-dracut-initqueue.service static disabled
-dracut-mount.service static disabled
-dracut-pre-mount.service static disabled
-dracut-pre-pivot.service static disabled
-dracut-pre-trigger.service static disabled
-dracut-pre-udev.service static disabled
-dracut-shutdown.service static disabled
+dracut-cmdline.service static
+dracut-initqueue.service static
+dracut-mount.service static
+dracut-pre-mount.service static
+dracut-pre-pivot.service static
+dracut-pre-trigger.service static
+dracut-pre-udev.service static
+dracut-shutdown.service static
ead.service disabled disabled
-emergency.service static disabled
+emergency.service static
fancontrol.service disabled disabled
firewalld.service enabled enabled
-fprintd.service static disabled
-fstrim.service static disabled
+fprintd.service static
+fstrim.service static
getty@.service enabled enabled
-grub-boot-indeterminate.service static disabled
+grub-boot-indeterminate.service static
gssproxy.service disabled disabled
import-state.service enabled enabled
initial-setup-reconfiguration.service disabled disabled
initial-setup.service enabled disabled
-initrd-cleanup.service static disabled
-initrd-parse-etc.service static disabled
-initrd-switch-root.service static disabled
-initrd-udevadm-cleanup-db.service static disabled
-instperf.service static disabled
+initrd-cleanup.service static
+initrd-parse-etc.service static
+initrd-switch-root.service static
+initrd-udevadm-cleanup-db.service static
+instperf.service static
io.podman.service disabled disabled
irqbalance.service enabled enabled
-iscsi-shutdown.service static disabled
+iscsi-shutdown.service static
iscsi.service enabled disabled
iscsid.service disabled disabled
iscsiuio.service disabled disabled
iwd.service disabled disabled
kdump.service disabled disabled
-kmod-static-nodes.service static disabled
-ldconfig.service static disabled
+kmod-static-nodes.service static
+ldconfig.service static
lm_sensors.service enabled enabled
loadmodules.service disabled disabled
-logrotate.service static disabled
-lvm2-lvmpolld.service static enabled
+logrotate.service static
+lvm2-lvmpolld.service static
lvm2-monitor.service enabled enabled
-lvm2-pvscan@.service static disabled
-man-db-cache-update.service static disabled
+lvm2-pvscan@.service static
+man-db-cache-update.service static
man-db-restart-cache-update.service disabled disabled
-mdadm-grow-continue@.service static disabled
-mdadm-last-resort@.service static disabled
-mdmon@.service static disabled
+mdadm-grow-continue@.service static
+mdadm-last-resort@.service static
+mdmon@.service static
mdmonitor.service enabled enabled
-mlocate-updatedb.service static disabled
+mlocate-updatedb.service static
ModemManager.service enabled enabled
-modprobe@.service static disabled
+modprobe@.service static
multipathd.service enabled enabled
ndctl-monitor.service disabled disabled
NetworkManager-dispatcher.service enabled enabled
@@ -127,53 +127,53 @@
NetworkManager.service enabled enabled
nfs-blkmap.service disabled disabled
nfs-convert.service enabled disabled
-nfs-idmapd.service static disabled
-nfs-mountd.service static disabled
+nfs-idmapd.service static
+nfs-mountd.service static
nfs-server.service disabled disabled
-nfs-utils.service static disabled
-nfsdcld.service static disabled
+nfs-utils.service static
+nfsdcld.service static
nftables.service disabled disabled
nis-domainname.service disabled disabled
oddjobd.service disabled disabled
openhpid.service disabled disabled
-ostree-finalize-staged.service static disabled
-ostree-prepare-root.service static disabled
+ostree-finalize-staged.service static
+ostree-prepare-root.service static
ostree-remount.service enabled enabled
-packagekit-offline-update.service static disabled
-packagekit.service static disabled
+packagekit-offline-update.service static
+packagekit.service static
pcscd.service indirect disabled
-plymouth-halt.service static disabled
-plymouth-kexec.service static disabled
-plymouth-poweroff.service static disabled
-plymouth-quit-wait.service static disabled
-plymouth-quit.service static disabled
-plymouth-read-write.service static disabled
-plymouth-reboot.service static disabled
-plymouth-start.service static disabled
-plymouth-switch-root.service static disabled
+plymouth-halt.service static
+plymouth-kexec.service static
+plymouth-poweroff.service static
+plymouth-quit-wait.service static
+plymouth-quit.service static
+plymouth-read-write.service static
+plymouth-reboot.service static
+plymouth-start.service static
+plymouth-switch-root.service static
podman.service disabled disabled
-polkit.service static enabled
+polkit.service static
psacct.service disabled disabled
qemu-guest-agent.service enabled enabled
-quotaon.service static disabled
+quotaon.service static
raid-check.service disabled disabled
-rc-local.service static disabled
+rc-local.service static
rdisc.service disabled disabled
-realmd.service static disabled
-rescue.service static disabled
+realmd.service static
+rescue.service static
rngd.service enabled enabled
-rpc-gssd.service static disabled
-rpc-statd-notify.service static disabled
-rpc-statd.service static disabled
+rpc-gssd.service static
+rpc-statd-notify.service static
+rpc-statd.service static
rpcbind.service disabled disabled
rsyslog.service enabled enabled
selinux-autorelabel-mark.service enabled enabled
-selinux-autorelabel.service static disabled
+selinux-autorelabel.service static
serial-getty@.service disabled disabled
smartd.service enabled enabled
sshd-keygen@.service disabled disabled
sshd.service enabled enabled
-sshd@.service static disabled
+sshd@.service static
sssd-autofs.service indirect disabled
sssd-kcm.service indirect disabled
sssd-nss.service indirect disabled
@@ -182,84 +182,84 @@
sssd-ssh.service indirect disabled
sssd-sudo.service indirect disabled
sssd.service enabled enabled
-system-update-cleanup.service static disabled
-systemd-ask-password-console.service static disabled
-systemd-ask-password-plymouth.service static disabled
-systemd-ask-password-wall.service static disabled
-systemd-backlight@.service static disabled
-systemd-binfmt.service static disabled
-systemd-bless-boot.service static disabled
+system-update-cleanup.service static
+systemd-ask-password-console.service static
+systemd-ask-password-plymouth.service static
+systemd-ask-password-wall.service static
+systemd-backlight@.service static
+systemd-binfmt.service static
+systemd-bless-boot.service static
systemd-boot-check-no-failures.service disabled disabled
-systemd-boot-system-token.service static disabled
-systemd-coredump@.service static disabled
-systemd-exit.service static disabled
-systemd-firstboot.service static disabled
-systemd-fsck-root.service static disabled
-systemd-fsck@.service static disabled
-systemd-halt.service static disabled
-systemd-hibernate-resume@.service static disabled
-systemd-hibernate.service static disabled
-systemd-homed.service static disabled
-systemd-hostnamed.service static disabled
-systemd-hwdb-update.service static disabled
-systemd-hybrid-sleep.service static disabled
-systemd-initctl.service static disabled
-systemd-journal-catalog-update.service static disabled
-systemd-journal-flush.service static disabled
-systemd-journald.service static disabled
-systemd-journald@.service static disabled
-systemd-kexec.service static disabled
-systemd-localed.service static disabled
-systemd-logind.service static disabled
-systemd-machine-id-commit.service static disabled
-systemd-modules-load.service static disabled
+systemd-boot-system-token.service static
+systemd-coredump@.service static
+systemd-exit.service static
+systemd-firstboot.service static
+systemd-fsck-root.service static
+systemd-fsck@.service static
+systemd-halt.service static
+systemd-hibernate-resume@.service static
+systemd-hibernate.service static
+systemd-homed.service static
+systemd-hostnamed.service static
+systemd-hwdb-update.service static
+systemd-hybrid-sleep.service static
+systemd-initctl.service static
+systemd-journal-catalog-update.service static
+systemd-journal-flush.service static
+systemd-journald.service static
+systemd-journald@.service static
+systemd-kexec.service static
+systemd-localed.service static
+systemd-logind.service static
+systemd-machine-id-commit.service static
+systemd-modules-load.service static
systemd-network-generator.service disabled disabled
systemd-networkd-wait-online.service disabled disabled
systemd-networkd.service disabled disabled
-systemd-portabled.service static disabled
-systemd-poweroff.service static disabled
+systemd-portabled.service static
+systemd-poweroff.service static
systemd-pstore.service disabled enabled
-systemd-quotacheck.service static disabled
-systemd-random-seed.service static disabled
-systemd-reboot.service static disabled
-systemd-remount-fs.service static disabled
-systemd-repart.service static disabled
+systemd-quotacheck.service static
+systemd-random-seed.service static
+systemd-reboot.service static
+systemd-remount-fs.service static
+systemd-repart.service static
systemd-resolved.service disabled disabled
-systemd-rfkill.service static disabled
-systemd-suspend-then-hibernate.service static disabled
-systemd-suspend.service static disabled
-systemd-sysctl.service static disabled
-systemd-sysusers.service static disabled
+systemd-rfkill.service static
+systemd-suspend-then-hibernate.service static
+systemd-suspend.service static
+systemd-sysctl.service static
+systemd-sysusers.service static
systemd-time-wait-sync.service disabled disabled
-systemd-timedated.service static disabled
+systemd-timedated.service static
systemd-timesyncd.service disabled disabled
-systemd-tmpfiles-clean.service static disabled
-systemd-tmpfiles-setup-dev.service static disabled
-systemd-tmpfiles-setup.service static disabled
-systemd-udev-settle.service static disabled
-systemd-udev-trigger.service static disabled
-systemd-udevd.service static disabled
-systemd-update-done.service static disabled
-systemd-update-utmp-runlevel.service static disabled
-systemd-update-utmp.service static disabled
-systemd-user-sessions.service static disabled
-systemd-userdbd.service static disabled
-systemd-vconsole-setup.service static disabled
-systemd-volatile-root.service static disabled
-teamd@.service static disabled
+systemd-tmpfiles-clean.service static
+systemd-tmpfiles-setup-dev.service static
+systemd-tmpfiles-setup.service static
+systemd-udev-settle.service static
+systemd-udev-trigger.service static
+systemd-udevd.service static
+systemd-update-done.service static
+systemd-update-utmp-runlevel.service static
+systemd-update-utmp.service static
+systemd-user-sessions.service static
+systemd-userdbd.service static
+systemd-vconsole-setup.service static
+systemd-volatile-root.service static
+teamd@.service static
udisks2.service enabled enabled
-user-runtime-dir@.service static disabled
-user@.service static disabled
+user-runtime-dir@.service static
+user@.service static
winbind.service disabled disabled
zram-swap.service enabled disabled
-zram.service static disabled
-system-cockpithttps.slice static disabled
-system-systemd\x2dcryptsetup.slice static disabled
-user.slice static disabled
-cockpit-wsinstance-http-redirect.socket static disabled
-cockpit-wsinstance-http.socket static disabled
-cockpit-wsinstance-https-factory.socket static disabled
-cockpit-wsinstance-https@.socket static disabled
+zram.service static
+system-cockpithttps.slice static
+system-systemd\x2dcryptsetup.slice static
+user.slice static
+cockpit-wsinstance-http-redirect.socket static
+cockpit-wsinstance-http.socket static
+cockpit-wsinstance-https-factory.socket static
+cockpit-wsinstance-https@.socket static
cockpit.socket enabled enabled
dbus.socket enabled enabled
dm-event.socket enabled enabled
@@ -280,95 +280,95 @@
sssd-pam.socket disabled disabled
sssd-ssh.socket disabled disabled
sssd-sudo.socket disabled disabled
-syslog.socket static disabled
-systemd-coredump.socket static disabled
-systemd-initctl.socket static disabled
-systemd-journald-audit.socket static disabled
-systemd-journald-dev-log.socket static disabled
-systemd-journald-varlink@.socket static disabled
-systemd-journald.socket static disabled
-systemd-journald@.socket static disabled
+syslog.socket static
+systemd-coredump.socket static
+systemd-initctl.socket static
+systemd-journald-audit.socket static
+systemd-journald-dev-log.socket static
+systemd-journald-varlink@.socket static
+systemd-journald.socket static
+systemd-journald@.socket static
systemd-networkd.socket disabled disabled
-systemd-rfkill.socket static disabled
-systemd-udevd-control.socket static disabled
-systemd-udevd-kernel.socket static disabled
-systemd-userdbd.socket static disabled
-anaconda.target static disabled
-basic.target static disabled
-blockdev@.target static disabled
-bluetooth.target static enabled
-boot-complete.target static disabled
-cryptsetup-pre.target static disabled
-cryptsetup.target static disabled
-ctrl-alt-del.target enabled disabled
-default.target indirect disabled
-emergency.target static disabled
+systemd-rfkill.socket static
+systemd-udevd-control.socket static
+systemd-udevd-kernel.socket static
+systemd-userdbd.socket static
+anaconda.target static
+basic.target static
+blockdev@.target static
+bluetooth.target static
+boot-complete.target static
+cryptsetup-pre.target static
+cryptsetup.target static
+ctrl-alt-del.target alias
+default.target alias
+emergency.target static
exit.target disabled disabled
-final.target static disabled
-getty-pre.target static disabled
-getty.target static disabled
-graphical.target static disabled
+final.target static
+getty-pre.target static
+getty.target static
+graphical.target static
halt.target disabled disabled
-hibernate.target static disabled
-hybrid-sleep.target static disabled
-initrd-fs.target static disabled
-initrd-root-device.target static disabled
-initrd-root-fs.target static disabled
-initrd-switch-root.target static disabled
-initrd.target static disabled
+hibernate.target static
+hybrid-sleep.target static
+initrd-fs.target static
+initrd-root-device.target static
+initrd-root-fs.target static
+initrd-switch-root.target static
+initrd.target static
kexec.target disabled disabled
-local-fs-pre.target static disabled
-local-fs.target static disabled
+local-fs-pre.target static
+local-fs.target static
multi-user.target indirect disabled
-network-online.target static disabled
-network-pre.target static disabled
-network.target static disabled
+network-online.target static
+network-pre.target static
+network.target static
nfs-client.target enabled disabled
-nss-lookup.target static disabled
-nss-user-lookup.target static disabled
-paths.target static disabled
+nss-lookup.target static
+nss-user-lookup.target static
+paths.target static
poweroff.target disabled disabled
-printer.target static disabled
+printer.target static
reboot.target enabled enabled
remote-cryptsetup.target disabled enabled
-remote-fs-pre.target static disabled
+remote-fs-pre.target static
remote-fs.target enabled enabled
-rescue.target static disabled
-rpc_pipefs.target static disabled
-rpcbind.target static disabled
-runlevel0.target disabled disabled
-runlevel1.target static disabled
-runlevel2.target indirect disabled
-runlevel3.target indirect disabled
-runlevel4.target indirect disabled
-runlevel5.target static disabled
-runlevel6.target enabled disabled
-selinux-autorelabel.target static disabled
-shutdown.target static disabled
-sigpwr.target static disabled
-sleep.target static disabled
-slices.target static disabled
-smartcard.target static disabled
-sockets.target static disabled
-sound.target static disabled
-sshd-keygen.target static disabled
-suspend-then-hibernate.target static disabled
-suspend.target static disabled
-swap.target static disabled
-sysinit.target static disabled
-system-update-pre.target static disabled
-system-update.target static disabled
-time-set.target static disabled
-time-sync.target static disabled
-timers.target static disabled
-umount.target static disabled
+rescue.target static
+rpc_pipefs.target static
+rpcbind.target static
+runlevel0.target alias
+runlevel1.target alias
+runlevel2.target alias
+runlevel3.target alias
+runlevel4.target alias
+runlevel5.target alias
+runlevel6.target alias
+selinux-autorelabel.target static
+shutdown.target static
+sigpwr.target static
+sleep.target static
+slices.target static
+smartcard.target static
+sockets.target static
+sound.target static
+sshd-keygen.target static
+suspend-then-hibernate.target static
+suspend.target static
+swap.target static
+sysinit.target static
+system-update-pre.target static
+system-update.target static
+time-set.target static
+time-sync.target static
+timers.target static
+umount.target static
chrony-dnssrv@.timer disabled disabled
dnf-makecache.timer enabled enabled
fstrim.timer enabled enabled
logrotate.timer enabled enabled
-mdadm-last-resort@.timer static disabled
+mdadm-last-resort@.timer static
mlocate-updatedb.timer enabled enabled
raid-check.timer disabled disabled
-systemd-tmpfiles-clean.timer static disabled
+systemd-tmpfiles-clean.timer static
371 unit files listed.
In particular, this allows a meaningful comparison to be made:
$ ~/src/systemd/build/systemctl --root=/tmp/root2 list-unit-files|rg 'enabled.*disabled|disabled.*enabled'
ostree-finalize-staged.path disabled enabled
initial-setup.service enabled disabled
iscsi.service enabled disabled
nfs-convert.service enabled disabled
systemd-pstore.service disabled enabled
zram-swap.service enabled disabled
iscsid.socket enabled disabled
iscsiuio.socket enabled disabled
multipathd.socket enabled disabled
nfs-client.target enabled disabled
remote-cryptsetup.target disabled enabled
(It turns out that most of the services on this list that are enabled without a
corresponding preset are against rpm packaging and do direct 'systemctl enable'
calls in %post, instead of going through presets as they are supposed to.)
systemctl: also skip preset status in status verb
Zbigniew Jędrzejewski-Szmek [Mon, 4 May 2020 17:53:33 +0000 (19:53 +0200)]
systemctl: add new enablement state "alias"
For units which are aliases of other units, reporting preset status as
"enabled" is rather misleading. For example, dbus.service is an alias of
dbus-broker.service. In list-unit-files we'd show both as "enabled". In
particular, systemctl preset ignores aliases, so showing any preset status at
all is always going to be misleading. Let's introduce a new state "alias" and
use that for all aliases.
I was trying to avoid adding a new state, to keep compatibility with previous
behaviour, but for alias unit files it simply doesn't seem very useful to show
any of the existing states. It seems that the clearly showing that those are
aliases for other units will be easiest to understand for users.
Zbigniew Jędrzejewski-Szmek [Mon, 4 May 2020 17:48:59 +0000 (19:48 +0200)]
shared/install: rename variable for clarity
Zbigniew Jędrzejewski-Szmek [Mon, 4 May 2020 17:45:19 +0000 (19:45 +0200)]
shared/install: print name of offending file in error
"Unit type slice cannot be templated."
↓
"/etc/systemd/system.control/user@.slice: unit type slice cannot be templated."
Zbigniew Jędrzejewski-Szmek [Mon, 4 May 2020 12:25:58 +0000 (14:25 +0200)]
shared/install: indent tables
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 20:37:34 +0000 (22:37 +0200)]
shared/install: optionally cache the preset list
When doing list-unit-files with --root, we would re-read the preset
list for every unit. This uses a cache to only do it once. The time
for list-unit-files goes down by about ~30%.
unit_file_query_preset() is also called from src/core/. This patch does not
touch that path, since the saving there are smaller, since preset status is
only read on demand over dbus, and caching would be more complicated.
Chris Down [Tue, 5 May 2020 19:16:10 +0000 (20:16 +0100)]
man: systemd.service: systemd-analyze exit-codes -> exit-status
5238d9a83a52 renames this to exit-status, but systemd.service was not
updated.
The rest of the doc seems a bit inconsistent in its use of the terms
"exit code" and "exit status", but it's not that confusing, so leave
those alone for now.
Ferran Pallarès Roca [Tue, 5 May 2020 11:50:22 +0000 (13:50 +0200)]
Add Zowie ZA12 details to mouse hwdb
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 16:45:08 +0000 (18:45 +0200)]
systemctl: fix --root support in querying presets
We would always look on the host, ignoring --root.
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 12:26:36 +0000 (14:26 +0200)]
systemctl: refuse online-only ops with --root
It is super confusing when a command does not support --root, and is called
with it specified, and returns some bogus results. Let's just catch this
early and refuse.
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 12:20:31 +0000 (14:20 +0200)]
shared/verbs: split out helper to find verbs
It will be used later, but I think it makes the code clearer anyway.
Also change the message about ignoring to include the name for default
verbs.
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 11:59:33 +0000 (13:59 +0200)]
shared/verbs: add a modicum of documentation
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 11:31:24 +0000 (13:31 +0200)]
systemctl: mark log-level,log-target,service-watchdogs as online-only
They were added in
6ab863190dee5ab631795ef547fcc7314ddccd40 and
38fcb7f766c84736425e86854b8a4468c126dafa . I don't see a good reason to
exclude them from the online-only check.
Zbigniew Jędrzejewski-Szmek [Thu, 30 Apr 2020 10:38:36 +0000 (12:38 +0200)]
systemctl: fix hint when 'systemctl help' is given
Not all verbs require unit names, but that is beside the point. We need a verb
here, and help is not a valid verb.
Zbigniew Jędrzejewski-Szmek [Tue, 5 May 2020 14:07:11 +0000 (16:07 +0200)]
Merge pull request #15645 from poettering/calender-expression-doc-fix
some calendar expression fixes and documentation updates
Frantisek Sumsal [Tue, 5 May 2020 13:02:37 +0000 (15:02 +0200)]
Revert "logs-show: declare [static 2] on all highlight parameters"
This reverts commit
5444520628830aacab85be630a6cdeb179ff510b .
See: https://github.com/systemd/systemd/pull/15706
Zbigniew Jędrzejewski-Szmek [Tue, 5 May 2020 12:00:26 +0000 (14:00 +0200)]
Merge pull request #15648 from poettering/journalctl-cat-beefup
journalctl: honour --output-fields= in -o cat mode
Lennart Poettering [Thu, 30 Apr 2020 10:26:11 +0000 (12:26 +0200)]
man: migrate more specifier explanations to standard-specifiers.xml
We probably can migrate even more, but for now let's just migrate those
which have the 1:1 identical text everywhere.
(Also, let's add the % entry to all specifier tables)
Zbigniew Jędrzejewski-Szmek [Tue, 5 May 2020 09:05:00 +0000 (11:05 +0200)]
Merge pull request #15701 from poettering/systemctl-json-table
systemctl: optionally output tables as json
ianhi [Tue, 5 May 2020 00:27:16 +0000 (20:27 -0400)]
correct evdev dimensions for T490 trackpad
The original source of these dimensions had swapped the x y dimension
arguments to touchpad-edge-detector. The correct dimensions are
x = 100 mm, y = 68 mm
Diego Escalante Urrelo [Tue, 5 May 2020 05:42:21 +0000 (00:42 -0500)]
hwdb: Fix brightness keys for Logitech K811
Closes: #15698
Lennart Poettering [Tue, 5 May 2020 06:19:30 +0000 (08:19 +0200)]
shutdown: fix spacing in shutdown error message
Lennart Poettering [Tue, 5 May 2020 07:21:10 +0000 (09:21 +0200)]
logs-show: declare [static 2] on all highlight parameters
Lennart Poettering [Thu, 30 Apr 2020 12:53:14 +0000 (14:53 +0200)]
man: document the new -o cat feature
Lennart Poettering [Thu, 30 Apr 2020 12:52:25 +0000 (14:52 +0200)]
journalctl: optionally, show a different field than MESSAGE in -o cat mode
Fixes: #15621
Lennart Poettering [Thu, 30 Apr 2020 12:52:18 +0000 (14:52 +0200)]
journal: use set_contains() where appropriate
Motiejus Jakštys [Mon, 4 May 2020 16:57:40 +0000 (19:57 +0300)]
nspawn: mount custom paths before writing to /etc
Consider such configuration:
$ systemd-nspawn --read-only --timezone=copy --resolv-conf=copy-host \
--overlay="+/etc::/etc" <...>
Assuming one wants `/` to be read-only, DNS and `/etc/localtime` to
work. One way to do it is to create an overlay filesystem in `/etc/`.
However, systemd-nspawn tries to create `/etc/resolv.conf` and
`/etc/localtime` before mounting the custom paths, while `/` (and, by
extension, `/etc`) is read-only. Thus it fails to create those files.
Mounting custom paths before modifying anything in `/etc/` makes this
possible.
Full example:
```
$ debootstrap buster /var/lib/machines/t1 http://deb.debian.org/debian
$ systemd-nspawn --private-users=false --timezone=copy --resolv-conf=copy-host --read-only --tmpfs=/var --tmpfs=/run --overlay="+/etc::/etc" -D /var/lib/machines/t1 ping -c 1 example.com
Spawning container t1 on /var/lib/machines/t1.
Press ^] three times within 1s to kill container.
ping: example.com: Temporary failure in name resolution
Container t1 failed with error code 130.
```
With the patch:
```
$ sudo ./build/systemd-nspawn --private-users=false --timezone=copy --resolv-conf=copy-host --read-only --tmpfs=/var --tmpfs=/run --overlay="+/etc::/etc" -D /var/lib/machines/t1 ping -qc 1 example.com
Spawning container t1 on /var/lib/machines/t1.
Press ^] three times within 1s to kill container.
PING example.com (93.184.216.34) 56(84) bytes of data.
--- example.org ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 110.912/110.912/110.912/0.000 ms
Container t1 exited successfully.
```
Lennart Poettering [Thu, 30 Apr 2020 11:42:59 +0000 (13:42 +0200)]
man: expand on the star…end/repetition time expressions
And attempt to explain what is requested in #15030, but still be
concise.
Fixes: #15030
Lennart Poettering [Thu, 30 Apr 2020 11:24:31 +0000 (13:24 +0200)]
calendarspec: be more graceful with two kinds of calendar expressions
This changes the calendarspec parser to allow expressions such as
"00:05..05", i.e. a range where start and end is the same. It also
allows expressions such as "00:1-2/3", i.e. where the repetition value
does not fit even once in the specified range. With this patch both
cases will now be optimized away, i.e. the range is removed and a fixed
value is used, which is functionally equivalent.
See #15030 for an issue where the inability to parse such expressions
caused confusion.
I think it's probably better to accept these gracefully and optimizing
them away instead of refusing them with a plain EINVAL. With a tool such
as "systemd-analyze" calendar it should be easy to figure out the
normalized form with the redundant bits optimized away.
Lennart Poettering [Thu, 30 Apr 2020 11:20:23 +0000 (13:20 +0200)]
calendarspec: minor simplification
Lennart Poettering [Thu, 30 Apr 2020 11:19:14 +0000 (13:19 +0200)]
calendarspec: drop _pure_ from static function
For static functions the compiler should be able to determine this on
its own, let's not add needless decorators.
Lennart Poettering [Thu, 30 Apr 2020 11:18:58 +0000 (13:18 +0200)]
calendarspec: pack our flags a bit
Lennart Poettering [Thu, 30 Apr 2020 11:18:45 +0000 (13:18 +0200)]
calendarspec: encode that it's OK to store µs in 'int's
Lennart Poettering [Tue, 5 May 2020 06:10:30 +0000 (08:10 +0200)]
systemctl: optionally output tables in JSON format
Lennart Poettering [Tue, 5 May 2020 06:09:04 +0000 (08:09 +0200)]
format-table: generate better JSON field names
Let's try to mangle table contents a bit to make them more suitable as
JSON field names. Specifically when we see "foo bar" convert this to
"foo_bar" as field name, as variable/field names are generally assumed
to be without spaces.
Anita Zhang [Tue, 5 May 2020 00:48:13 +0000 (17:48 -0700)]
Merge pull request #15636 from poettering/sensitivity-training
be more careful when setting json variant + dbus message sensitive flag
Anita Zhang [Mon, 4 May 2020 23:28:51 +0000 (16:28 -0700)]
Merge pull request #15647 from benzea/benzea/graphical-use-app-prefix
docs: Change prefix for desktop applications to app-
Michal Koutný [Fri, 1 May 2020 18:45:39 +0000 (20:45 +0200)]
mkosi: Fix openSUSE image declaration
User accounts of given names are necessary for the build script and
tests to succeed.
(Fixup of #15527, too keen cleaning of dependencies and cached image
caused this.)
Lukas Klingsbo [Mon, 4 May 2020 07:49:04 +0000 (09:49 +0200)]
Add Kensington SlimBlade Trackball
Piotr Drąg [Sun, 3 May 2020 12:05:35 +0000 (14:05 +0200)]
catalog,po: update Polish translation