Junio C Hamano [Tue, 9 Jun 2020 01:06:30 +0000 (18:06 -0700)]
Merge branch 'dl/remote-curl-deadlock-fix'
On-the-wire protocol v2 easily falls into a deadlock between the
remote-curl helper and the fetch-pack process when the server side
prematurely throws an error and disconnects. The communication has
been updated to make it more robust.
* dl/remote-curl-deadlock-fix:
stateless-connect: send response end packet
pkt-line: define PACKET_READ_RESPONSE_END
remote-curl: error on incomplete packet
pkt-line: extern packet_length()
transport: extract common fetch_pack() call
remote-curl: remove label indentation
remote-curl: fix typo
Junio C Hamano [Tue, 9 Jun 2020 01:06:29 +0000 (18:06 -0700)]
Merge branch 'vs/complete-stash-show-p-fix'
The command line completion script (in contrib/) tried to complete
"git stash -p" as if it were "git stash push -p", but it was too
aggressive and also affected "git stash show -p", which has been
corrected.
* vs/complete-stash-show-p-fix:
completion: don't override given stash subcommand with -p
Junio C Hamano [Tue, 9 Jun 2020 01:06:28 +0000 (18:06 -0700)]
Merge branch 'rs/fsck-duplicate-names-in-trees'
The check in "git fsck" to ensure that the tree objects are sorted
still had corner cases it missed unsorted entries.
* rs/fsck-duplicate-names-in-trees:
fsck: detect more in-tree d/f conflicts
t1450: demonstrate undetected in-tree d/f conflict
t1450: increase test coverage of in-tree d/f detection
fsck: fix a typo in a comment
Junio C Hamano [Tue, 9 Jun 2020 01:06:27 +0000 (18:06 -0700)]
Merge branch 'cb/t4210-illseq-auto-detect'
As FreeBSD is not the only platform whose regexp library reports
a REG_ILLSEQ error when fed invalid UTF-8, add logic to detect that
automatically and skip the affected tests.
* cb/t4210-illseq-auto-detect:
t4210: detect REG_ILLSEQ dynamically and skip affected tests
t/helper: teach test-regex to report pattern errors (like REG_ILLSEQ)
Junio C Hamano [Tue, 2 Jun 2020 20:35:05 +0000 (13:35 -0700)]
Merge branch 'en/fast-import-looser-date'
Some repositories in the wild have commits that record nonsense
committer timezone (e.g. rails.git); "git fast-import" learned an
option to pass these nonsense timestamps intact to allow recreating
existing repositories as-is.
* en/fast-import-looser-date:
fast-import: add new --date-format=raw-permissive format
Junio C Hamano [Tue, 2 Jun 2020 20:35:03 +0000 (13:35 -0700)]
Merge branch 'lo/sparse-universal-zero-init'
We've adopted a convention that any on-stack structure can be
initialized to have zero values in all fields with "= { 0 }", even
when the first field happens to be a pointer, but sparse complained
that a null pointer should be spelled NULL for a long time. Start
using -Wno-universal-initializer option to squelch it.
* lo/sparse-universal-zero-init:
sparse: allow '{ 0 }' to be used without warnings
Junio C Hamano [Tue, 2 Jun 2020 20:35:01 +0000 (13:35 -0700)]
Merge branch 'jn/experimental-opts-into-proto-v2'
"feature.experimental" configuration variable is to let volunteers
easily opt into a set of newer features, which use of the v2
transport protocol is now a part of.
* jn/experimental-opts-into-proto-v2:
config: let feature.experimental imply protocol.version=2
Elijah Newren [Sat, 30 May 2020 20:25:57 +0000 (20:25 +0000)]
fast-import: add new --date-format=raw-permissive format
There are multiple repositories in the wild with random, invalid
timezones. Most notably is a commit from rails.git with a timezone of
"+051800"[1]. A few searches will find other repos with that same
invalid timezone as well. Further, Peff reports that GitHub relaxed
their fsck checks in August 2011 to accept any timezone value[2], and
there have been multiple reports to filter-repo about fast-import
crashing while trying to import their existing repositories since they
had timezone values such as "-7349423" and "-43455309"[3].
The existing check on timezone values inside fast-import may prove
useful for people who are crafting fast-import input by hand or with a
new script. For them, the check may help them avoid accidentally
recording invalid dates. (Note that this check is rather simplistic and
there are still several forms of invalid dates that fast-import does not
check for: dates in the future, timezone values with minutes that are
not divisible by 15, and timezone values with minutes that are 60 or
greater.) While this simple check may have some value for those users,
other users or tools will want to import existing repositories as-is.
Provide a --date-format=raw-permissive format that will not error out on
these otherwise invalid timezones so that such existing repositories can
be imported.
Jiang Xin [Sat, 30 May 2020 03:26:53 +0000 (11:26 +0800)]
Merge branch 'master' of github.com:ruester/git-po-de
* 'master' of github.com:ruester/git-po-de:
l10n: de.po: Fix typo in the German translation of octopus
l10n: de.po: Update German translation for Git 2.27.0
f1e3df3169 (t: increase test coverage of signature verification output,
2020-03-04) adds GPG dependent tests to t4202 and t6200 that were found
problematic with at least OpenBSD 6.7.
Using an escaped '|' for alternations works only in some implementations
of grep (e.g. GNU and busybox).
It is not part of POSIX[1] and not supported by some BSD, macOS, and
possibly other POSIX compatible implementations.
Use `grep -E`, and write it using extended regular expression.
Helped-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When clearing the builtin operations on re-sourcing in the ZSH case we
can use the native ${parameters} associative array keys values to get
the currently `__gitcomp_builtin_*` operations using pattern matching
instead of using sed.
As also stated in commit 94408dc7, introducing this change the usage of
sed has some overhead implications, while ZSH can do this check just
using its native syntax.
Signed-off-by: Marco Trevisan (Treviño) <mail@3v1n0.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original patch selection code was written for `git add -p`, and the
fundamental unit on which it works is a hunk.
We hacked around that to handle deletions back in 24ab81ae4d
(add-interactive: handle deletion of empty files, 2009-10-27). But `git
add -p` would never see a new file, since we only consider the set of
tracked files in the index.
However, since the same machinery was used for `git checkout -p` &
friends, we can see new files.
Handle this case specifically, adding a new prompt for it that is
modeled after the `deleted file` case.
This also fixes the problem where added _empty_ files could not be
staged via `git checkout -p`.
Reported-by: Merlin Büge <toni@bluenox07.de> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Toon Claes [Tue, 26 May 2020 18:37:20 +0000 (20:37 +0200)]
Documentation: correct hash environment variable
To set the default hash algorithm you can set the `GIT_DEFAULT_HASH`
environment variable. In the documentation this variable is named
`GIT_DEFAULT_HASH_ALGORITHM`, which is incorrect.
Signed-off-by: Toon Claes <toon@iotcl.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Mon, 25 May 2020 17:06:07 +0000 (19:06 +0200)]
rev-list-options.txt: start a list for `show-pulls`
The explanation of the `--show-pulls` option added in commit 8d049e182e
("revision: --show-pulls adds helpful merges", 2020-04-10) consists of
several paragraphs and we use "+" throughout to tie them together in one
long chain of list continuations. Only thing is, we're not in any kind
of list, so these pluses end up being rendered literally.
The preceding few paragraphs describe `--ancestry-path` and there we
*do* have a list, since we've started one with `--ancestry-path::`. In
fact, we have several such lists for all the various history-simplifying
options we're discussing earlier in this file.
Thus, we're missing a list both from a consistency point of view and
from a practical rendering standpoint.
Let's start a list for `--show-pulls` where we start actually discussing
the option, and keep the paragraphs preceding it out of that list. That
is, drop all those pluses before the new list we're adding here.
Helped-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Tue, 19 May 2020 04:53:01 +0000 (00:53 -0400)]
gitfaq: avoid validation error with older asciidoc
When building with asciidoc-8.4.5 (as found on CentOS/Red Hat 6), the
period in the "[[files-in-.gitignore-are-tracked]]" anchor is not
properly parsed as a section:
WARNING: gitfaq.txt: line 245: missing [[files-in-.gitignore-are-tracked]] section
The resulting XML file fails to validate with xmlto:
xmlto: /git/Documentation/gitfaq.xml does not validate (status 3)
xmlto: Fix document syntax or use --skip-validation option
/git/Documentation/gitfaq.xml:3: element refentry: validity error :
Element refentry content does not follow the DTD, expecting
(beginpage? , indexterm* , refentryinfo? , refmeta? , (remark | link
| olink | ulink)* , refnamediv+ , refsynopsisdiv? , (refsect1+ |
refsection+)), got (refmeta refnamediv refsynopsisdiv refsect1
refsect1 refsect1 refsect1 variablelist refsect1 refsect1 )
Document /git/Documentation/gitfaq.xml does not validate
Let's avoid breaking users of platforms which ship an old version of
asciidoc, since the cost to do so is quite low.
Reported-by: Son Luong Ngoc <sluongng@gmail.com> Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In standard C, '{ 0 }' can be used as an universal zero-initializer.
However, Sparse complains if this is used on a type where the first
member (possibly nested) is a pointer since Sparse purposely wants
to warn when '0' is used to initialize a pointer type.
Legitimaly, it's desirable to be able to use '{ 0 }' as an idiom
without these warnings [1,2]. To allow this, an option have now
been added to Sparse: 537e3e2dae univ-init: conditionally accept { 0 } without warnings
So, add this option to the SPARSE_FLAGS variable.
Note: The option have just been added to Sparse. So, to benefit
now from this patch it's needed to use the latest Sparse
source from kernel.org. The option will simply be ignored
by older versions of Sparse.
Denton Liu [Tue, 19 May 2020 10:54:00 +0000 (06:54 -0400)]
stateless-connect: send response end packet
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated before the transaction is
complete, remote-curl will blindly forward the packets before waiting on
more input from fetch-pack. Meanwhile, fetch-pack will read the
transaction and continue reading, expecting more input to continue the
transaction. This results in a deadlock between the two processes.
This can be seen in the following command which does not terminate:
$ git -c protocol.version=2 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
whereas the v1 version does terminate as expected:
$ git -c protocol.version=1 clone https://github.com/git/git.git --shallow-since=20151012
Cloning into 'git'...
fatal: the remote end hung up unexpectedly
Instead of blindly forwarding packets, make remote-curl insert a
response end packet after proxying the responses from the remote server
when using stateless_connect(). On the RPC client side, ensure that each
response ends as described.
A separate control packet is chosen because we need to be able to
differentiate between what the remote server sends and remote-curl's
control packets. By ensuring in the remote-curl code that a server
cannot send response end packets, we prevent a malicious server from
being able to perform a denial of service attack in which they spoof a
response end packet and cause the described deadlock to happen.
Reported-by: Force Charlie <charlieio@outlook.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 19 May 2020 10:53:59 +0000 (06:53 -0400)]
pkt-line: define PACKET_READ_RESPONSE_END
In a future commit, we will use PACKET_READ_RESPONSE_END to separate
messages proxied by remote-curl. To prepare for this, add the
PACKET_READ_RESPONSE_END enum value.
In switch statements that need a case added, die() or BUG() when a
PACKET_READ_RESPONSE_END is unexpected. Otherwise, mirror how
PACKET_READ_DELIM is implemented (especially in cases where packets are
being forwarded).
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Tue, 19 May 2020 10:53:58 +0000 (06:53 -0400)]
remote-curl: error on incomplete packet
Currently, remote-curl acts as a proxy and blindly forwards packets
between an HTTP server and fetch-pack. In the case of a stateless RPC
connection where the connection is terminated with a partially written
packet, remote-curl will blindly send the partially written packet
before waiting on more input from fetch-pack. Meanwhile, fetch-pack will
read the partial packet and continue reading, expecting more input. This
results in a deadlock between the two processes.
For a stateless connection, inspect packets before sending them and
error out if a packet line packet is incomplete.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Laurent Arnoud [Fri, 22 May 2020 10:46:18 +0000 (12:46 +0200)]
diff: add config option relative
The `diff.relative` boolean option set to `true` shows only changes in
the current directory/value specified by the `path` argument of the
`relative` option and shows pathnames relative to the aforementioned
directory.
Teach `--no-relative` to override earlier `--relative`
Add for git-format-patch(1) options documentation `--relative` and
`--no-relative`
Signed-off-by: Laurent Arnoud <laurent@spkdev.net> Acked-by: Đoàn Trần Công Danh <congdanhqx@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5608: avoid say() and use "skip_all" instead for consistency
Printing a message directly to stdout could affect TAP processing
and is not really needed, as there is a standard way to skip all
tests that could be used instead, while printing an equivalent
message.
While at it; update the message to better reflect that since a85efb5985 (t5608-clone-2gb.sh: turn GIT_TEST_CLONE_2GB into a bool,
2019-11-22), the enabling variable should be a recognized boolean
(ex: true, false, 1, 0) and get rid of the prerequisite that used
to guard all the tests, since "skip_all" is just much faster and
idempotent.
Helped-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 24 May 2020 07:23:00 +0000 (09:23 +0200)]
checkout: improve error messages for -b with extra argument
When we try to create a branch "foo" based on "origin/master" and give
git commit -b an extra unsupported argument "bar", it confusingly
reports:
$ git checkout -b foo origin/master bar
fatal: 'bar' is not a commit and a branch 'foo' cannot be created from it
$ git checkout --track -b foo origin/master bar
fatal: 'bar' is not a commit and a branch 'foo' cannot be created from it
That's wrong, because it very well understands that "origin/master" is
supposed to be the start point for the new branch and not "bar". Check
if we got a commit and show more fitting messages in that case instead:
$ git checkout -b foo origin/master bar
fatal: Cannot update paths and switch to branch 'foo' at the same time.
$ git checkout --track -b foo origin/master bar
fatal: '--track' cannot be used with updating paths
Original-patch-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 24 May 2020 07:22:51 +0000 (09:22 +0200)]
checkout: add tests for -b and --track
Test git checkout -b with and without --track and demonstrate unexpected
error messages when it's given an extra (i.e. unsupported) path
argument. In both cases it reports:
$ git checkout -b foo origin/master bar
fatal: 'bar' is not a commit and a branch 'foo' cannot be created from it
The problem is that the start point we gave for the new branch is
"origin/master" and "bar" is just some extra argument -- it could even
be a valid commit, which would make the message even more confusing. We
have more fitting error messages in git commit, but get confused; use
the text of the rights ones in the tests.
Reported-by: Dana Dahlstrom <dahlstrom@google.com> Original-test-by: Jeff King <peff@peff.net> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect--helper: avoid segfault with bad syntax in `start --term-*`
06f5608c14 (bisect--helper: `bisect_start` shell function partially in C,
2019-01-02) adds a lax parser for `git bisect start` which could result
in a segfault under a bad syntax call for start with custom terms.
Detect if there are enough arguments left in the command line to use for
--term-{old,good,new,bad} and abort with the same syntax error the original
implementation will show if not.
While at it, remove an unnecessary (and incomplete) check for unknown
arguments and make sure to add a test to avoid regressions.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Acked-by: Christian Couder <christian.couder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ville Skyttä [Thu, 21 May 2020 18:35:59 +0000 (21:35 +0300)]
completion: don't override given stash subcommand with -p
df70b190 (completion: make stash -p and alias for stash push -p,
2018-04-20) wanted to make sure "git stash -p <TAB>" offers the same
completion as "git stash push -p <TAB>", but it did so by forcing the
$subcommand to be "push" whenever then "-p" option is found on the
command line.
This harms any subcommand that can take the "-p" option---even when the
subcommand is explicitly given, e.g. "git stash show -p", the code added
by the change would overwrite the $subcommand the user gave us.
Fix it by making sure that the defaulting to "push" happens only when
there is no $subcommand given yet.
Signed-off-by: Ville Skyttä <ville.skytta@iki.fi> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 21 May 2020 18:15:04 +0000 (11:15 -0700)]
Merge https://github.com/prati0100/git-gui
* https://github.com/prati0100/git-gui:
git-gui: Handle Ctrl + BS/Del in the commit msg
Subject: git-gui: fix syntax error because of missing semicolon
René Scharfe [Thu, 21 May 2020 09:52:54 +0000 (11:52 +0200)]
fsck: detect more in-tree d/f conflicts
If the conflict candidate file name from the top of the stack is not a
prefix of the current candiate directory then we can discard it as no
matching directory can come up later. But we are not done checking the
candidate directory -- the stack might still hold a matching file name,
so stay in the loop and check the next candidate file name.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 21 May 2020 09:52:28 +0000 (11:52 +0200)]
t1450: increase test coverage of in-tree d/f detection
Exercise the case of putting a conflict candidate file name back on the
stack because a matching directory might yet come up later.
Do that by factoring out the test code into a function to allow for more
concise notation in the form of parameters indicating names of trees
(with trailing slash) and blobs (without trailing slash) in no
particular order (they are sorted by git mktree). Then add the new test
case as a second function call.
Fix a typo in the test title while at it ("dublicate").
Reported-by: Derrick Stolee <stolee@gmail.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiuyang Xie [Thu, 21 May 2020 11:32:38 +0000 (19:32 +0800)]
doc: fix wrong 4-byte length of pkt-line message
The first four bytes of the line, the pkt-len, indicates the total
length of the pkt-line in hexadecimal. Fix wrong pkt-len headers of
some pkt-line messages in `http-protocol.txt` and `pack-protocol.txt`.
Reviewed-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Jiuyang Xie <jiuyang.xjy@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 21 May 2020 02:07:12 +0000 (02:07 +0000)]
t2060: add a test for switch with --orphan and --discard-changes
We have several code paths in the checkout code which are traversed only
in this case, due to switch having different defaults from checkout.
Let's add a test that the combination of options works and produces the
expected behavior.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we call init_checkout_metadata in reset_tree, we want to pass the
object ID of the commit in question so that it can be passed to filters,
or if there is no commit, the tree. We anticipated this latter case,
which can occur elsewhere in the checkout code, but it cannot occur
here. The only case in which we do not have a commit object is when
invoking git switch with --orphan. Moreover, we can only hit this code
path without a commit object additionally with either --force or
--discard-changes.
In such a case, there is no point initializing the checkout metadata
with a commit or tree because (a) there is no commit, only the empty
tree, and (b) we will never use the data, since no files will be smudged
when checking out a branch with no files. Pass the all-zeros object ID
in this case, since we just need some value which is a valid pointer.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Nieder [Thu, 21 May 2020 02:15:33 +0000 (19:15 -0700)]
config: let feature.experimental imply protocol.version=2
Git 2.26 used protocol v2 as its default protocol, but soon after
release, users noticed that the protocol v2 negotiation code was prone
to fail when fetching from some remotes that are far ahead of others
(such as linux-next.git versus Linus's linux.git). That has been
fixed by 0b07eecf6ed (Merge branch 'jt/v2-fetch-nego-fix',
2020-05-01), but to be cautious, we are using protocol v0 as the
default in 2.27 to buy some time for any other unanticipated issues to
surface.
To that end, let's ensure that users requesting the bleeding edge
using the feature.experimental flag *do* get protocol v2. This way,
we can gain experience with a wider audience for the new protocol
version and be more confident when it is time to enable it by default
for all users in some future Git version.
Implementation note: this isn't with the rest of the
feature.experimental options in repo-settings.c because those are tied
to a repository object, whereas this code path is used for operations
like "git ls-remote" that do not require a repository.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
bisect: avoid tailing CR characters from revision in replay
6c722cbe5a (bisect: allow CRLF line endings in "git bisect replay"
input, 2020-05-07) includes CR as a field separator, but relies on
it not being included in the last field, which breaks at least when
running under OpenBSD 6.7's sh.
Instead of just assume the CR will get swallowed, read the rest of
the line into an otherwise unused variable and ignore it everywhere
except on the call for git bisect start, where it matters.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5520: avoid alternation in grep's BRE (not POSIX)
Instead of using a BRE, that broke tests 30-32, 37-39, 42 at least with
OpenBSD 6.7; use a simpler ERE.
Fixes: d9f15d37f1 (pull: pass --autostash to merge, 2020-04-07) Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 20 May 2020 15:33:29 +0000 (08:33 -0700)]
Merge branch 'jc/fix-tap-output-under-bash'
A recent attempt to make the test output nicer to view on CI
systems broke TAP output under bash. The effort has been reverted
to be re-attempted in the next cycle.
* jc/fix-tap-output-under-bash:
Revert "tests: when run in Bash, annotate test failures with file name/line number"
Revert "ci: add a problem matcher for GitHub Actions"
Revert "t/test_lib: avoid naked bash arrays in file_lineno"
Junio C Hamano [Wed, 20 May 2020 15:33:27 +0000 (08:33 -0700)]
Merge branch 'js/ci-sdk-download-fix'
Instead of downloading Windows SDK for CI jobs for windows builds
from an external site (wingit.blob.core.windows.net), use the one
created in the windows-build job, to work around quota issues at
the external site.
* js/ci-sdk-download-fix:
ci: avoid pounding on the poor ci-artifacts container
When a binary file gets modified and renamed on both sides of history
to different locations, both files would be written to the working
tree but both would have the contents from "ours". This has been
corrected so that the path from each side gets their original content.
* en/merge-rename-rename-worktree-fix:
merge-recursive: fix rename/rename(1to2) for working tree with a binary