Adam Kwolek [Tue, 1 Feb 2011 14:24:54 +0000 (15:24 +0100)]
imsm: FIX: size have to be calculated based on first map
Before reshape finalization migration is still present in metadata.
After patch 'imsm: FIX: crash during getting map'
function get_imsm_map() returns correct value,
this means in our case from second (start) map.
We should calculate map size basing on first (final) map.
For this we should request it by setting second function parameter to '0'
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Thu, 3 Feb 2011 06:57:10 +0000 (17:57 +1100)]
imsm: FIX: Debug strings cleanup
Some debug strings remains as they were introduced,
before code was moved to separate function.
Information displayed by debug information in not all cases
was correct.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Thu, 3 Feb 2011 06:34:27 +0000 (17:34 +1100)]
FIX: Last checkpoint is not set
When reshape is finished monitor has to set last checkpoint
to the array end to allow metatdata for reshape finalization.
Metadata has to know if reshape is finished or it is broken
On reshape finish metadata finalization is required.
When reshape is broken, metadata must remain as is to allow
for reshape restart from checkpoint.
This can be resolved based on reshape_position sysfs entry.
When it is equal to 'none', it means that md finishes work.
In such situation move checkpoint to the end of array.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Thu, 3 Feb 2011 06:02:39 +0000 (17:02 +1100)]
imsm: FIX: crash during getting map
When get_imsm_map() is called with second_map parameter == '-1'
and array is not in migration state NULL pointer is returned.
This is wrong. '-1' means return map as migration record points.
'-1' can be passed to get_imsm_map() from imsm_num_data_members().
imsm_num_data_members() is called to get current map members based
on migr_state information
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Tue, 1 Feb 2011 03:44:02 +0000 (14:44 +1100)]
Allow explicitly listed spared to be included by default.
When the metadata doesn't identify which array a spare belongs to
we normally require an explicit domain match to connect a spare
with an array.
However when the spare is explicitly listed in argv, it should be
safe to include as long as there is no domain conflict.
NeilBrown [Tue, 1 Feb 2011 03:44:02 +0000 (14:44 +1100)]
Allow domain_test to report that no domains were found.
Sometime we will need to know the difference between no domains found
and domains didn't match.
So allow domain_test to return different values and fix up all callers
to maintain current behaviour.
NeilBrown [Tue, 1 Feb 2011 02:07:07 +0000 (13:07 +1100)]
Assemble: ignore unknown devices not listed on command line.
If we find a device that has not superblock, we currently fail
unless in auto_assem mode.
However we really should only fail if the device was explicitly listed
in the arg list. So add a test for that.
Czarnowska, Anna [Mon, 31 Jan 2011 23:40:56 +0000 (10:40 +1100)]
Assemble: allow to assemble container with uuid=0:0:0:0
When there are any arrays in config file the spares with
domain not matching any array are not assembled because
auto assembly is not attempted.
Addition of ARRAY line with uuid=0:0:0:0 in config will work
with modified condition for gathering spares.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Mon, 31 Jan 2011 23:40:56 +0000 (10:40 +1100)]
imsm: FIX: map coping causes mdmon crash
Too big map was copied (outside allocated memory) and this causes
mdmon crash for 2 raid0 arrays in container.
Map of correct (smaller) size should be copied,
to not overwrite any internal data.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Mon, 31 Jan 2011 14:25:16 +0000 (15:25 +0100)]
imsm: FIX: mdmon crash during 2 raid0 arrays expansion
When expansion is run on 2 raid0 arrays in container no update
is sent to mdmon because mdmon is off (mdadm performs update)
Memory size for first reshaped array is allocated to satisfy memory
requirements for expanded maps.
Memory for second device is allocated using old disks number, as in
metadata there is no information about this array reshape.
When mdmon initiates second array reshape it overwrites internal
structures and crashes). There is no place to keep expanded maps.
To avoid this situation during loading metadata, allocated memory
should be performed using the maximum used disks number in particular
container.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Mon, 31 Jan 2011 07:59:30 +0000 (08:59 +0100)]
imsm: Update metadata for second array
When second array reshape is about to start external metadata should
be updated by mdmon in imsm_set_array_state(). For this purposes
imsm_progress_container_reshape() is reused.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Mon, 31 Jan 2011 04:32:19 +0000 (15:32 +1100)]
Grow: when restarting, do set new details if they are already set.
When restarting a reshape with internal metadata, the new geometry
is already set and the reshape has been start (but has not been
allowed to continue yet).
So in that case, don't set things and don't ask for a reshape.
NeilBrown [Mon, 31 Jan 2011 02:53:35 +0000 (13:53 +1100)]
Call free_super before attempting to add a new device
Now that write_init_super doesn't close fds any more, we need
to call free_super before the ADD_NEW_DISK ioctl.
Also call free_super before some error returns, for cleanliness.
Labun, Marcin [Fri, 28 Jan 2011 16:48:33 +0000 (16:48 +0000)]
11spare-migration: pass conditions for tests 9 and 12 should be reversed
Test 9: We do not block spare migration between different metadatas.
test 13: Migrated spare must belong the same domain as destination -
there is no additional condition for action.
Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun, Marcin [Fri, 28 Jan 2011 16:48:27 +0000 (16:48 +0000)]
env-11spare-migration: imsm requires IMSM_NO_PLATFORM set with loop devices
By default IMSM checks if member device belongs to AHCI or ISCI controller.
When using loop devices one must disable these checks by setting
IMSM_NO_PLATFORM.
Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Mon, 31 Jan 2011 00:34:42 +0000 (11:34 +1100)]
Call free_super earlier when creating an array.
As free_super now closes fds for member devices, rather than
write_init_super doing it, we need to call free_super earlier,
so that the device (on which we hold an O_EXCL open) is closed
before it is added to the array.
So close at the end of pass-1 rather than after pass-2.
NeilBrown [Mon, 31 Jan 2011 00:33:18 +0000 (11:33 +1100)]
super1: fix regression in write_init_super.
Now that a 'supertype' container more information, the simplistic
copying of 'st' into 'refst' is incorrect and results in closing
some fds when load_super1(refst) calls free_super().
Adam Kwolek [Fri, 28 Jan 2011 13:37:51 +0000 (14:37 +0100)]
imsm: FIX: not all disks are released in free_imsm_disks()
Adding spare disks to imsm container fails due to problem with writing
new_dev to sysfs. This problem was caused by not closed handle
(opened exclusively) in Manage.c:803.
Disk handle was not closed by free_imsm().
This is due to not released disk_mgmt_list in free_imsm_disks().
Proper release of imsm metadata allows for spare adding without problems.
Memory leak was fixed also.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Czarnowska, Anna [Mon, 17 Jan 2011 10:06:10 +0000 (10:06 +0000)]
Monitor: avoid adding too many spares to container
Tests revealed that sometimes there are still more spares taken
than needed. The reason for this is that after adding one spare
to container with degraded subarray
if between ioctl in main loop and load_container in try_spare_migration
mdmon activates the spare we see active<raid but find no spares in parent
container and so add an extra spare.
To prevent such behaviour we count active disks in the list returned
by getinfo_super_disks and compare it with subarray->active.
If the number has increased it means new spare was added and activated
so there is no need for more.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Thu, 27 Jan 2011 16:46:58 +0000 (17:46 +0100)]
FIX: Meet SET_ARRAY_INFO ioctl requirements
Problem has been observed when raid10<->raid0 takeover operation
is executed.
In code updating layout, raid_disks and chunk_size for non-restriping
operations in reshape array functions SET_ARRAY_INFO ioctl call was
not succeeded.
Takeover process finish execution with error, mdadm shows message:
"mdadm: failed to set disks"
Cause is not meeting SET_ARRAY_INFO ioctl requirements:
- only one parameter may be changed at one time
- level of current array info and new info should be the same
Patch introduces solution for this issue.
At the beginning of discussed code we read current information
about array and then compare them with new values should be set.
If particular value is different (and should be set),
we are overwrite only this one in array info and then call ioctl.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Thu, 27 Jan 2011 16:46:50 +0000 (17:46 +0100)]
FIX: Remove disks in mdmon for external metadata
For raid10 -> raid0 takeover operation we should reject disks
in mirror by marking them as 'failed' and then remove them from
array by writing "remove" to disk state.
For external metadata second action is executed by mdmon.
According the description in monitor.c:175 when monitor detect
"faulty" in device state, it blocks the device, mark it as failed
in metadata, unblocks the device and finally writes "remove"
to device state.
For external case writing "remove" to device state in mdadm
is not necessary and harmful.
It may cause following issues:
1. "remove" operation for external case in mdadm is not finish
with successful result because monitor may block the device or disk
has been already removed by monitor.
2. If disk is removed by mdadm earlier than mdmon catch "failed" state,
metadata is not properly updated- is not marked as failed.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Thu, 27 Jan 2011 14:44:39 +0000 (15:44 +0100)]
WORKAROUND: mdadm hangs during reshape (PART #2)
After loop can occurs that due to 0 value reported by kernel
we have 0 in completed variable.
This is wrong. we are interested in real completed point.
0 value means that we reached sync point set in md,
so we can set completed variable to just reached point.
this point value is stored in max_progress variable.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 26 Jan 2011 15:03:41 +0000 (16:03 +0100)]
FIX: Array after takeover has to be frozen
Problem occurs when we want to expand single disk raid0 array.
This is done via degraded 2 disks raid4 array. When new spare
is added to array, md immediately initiates recovery before
mdadm can configure and start reshape. This is due fact that 2 disk
raid4/5 array is special md case. Mdmon does nothing here because
container is blocked.
Put array in to frozen state allows mdadm to finish configuration
before reshape is executed in md.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 26 Jan 2011 15:03:33 +0000 (16:03 +0100)]
imsm: FIX: do not allow for container operation for the same disks number
imsm_reshape_super() currently allows for expansion when requested
raid_disks number is the same as current.
This is wrong. Existing in code condition is too weak.
We should allow for expansion when new disks_number is greater
than current only.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
...and need the second '/' from the end of the string to read detect a
'md' device.
Reported-by: Krzysztof Wasilewski <krzysztof.wasilewski@intel.com> Cc: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun, Marcin [Tue, 25 Jan 2011 15:59:32 +0000 (15:59 +0000)]
Dynamic hot-plug udev rules for policies
Neil,
Please consider this patch that once was discussed and I think agreed with in general direction. It was sent a while ago
but somehow did not merged into your devel3-2. This patch enables hot-plug of so called bare devices (as understand by domain policies rules in mdadm.conf).
Without this patch we do NOT serve hot-plug of bare devices at all.
Thanks,
Marcin Labun
Subject was: FW: Autorebuild, new dynamic udev rules for hot-plugs
>>From c0aecd4dd96691e8bfa6f2dc187261ec8bb2c5a2 Mon Sep 17 00:00:00 2001
From: Przemyslaw Czarnowski <przemyslaw.hawrylewicz.czarnowski@intel.com>
Date: Thu, 23 Dec 2010 16:35:01 +0100
Subject: [PATCH] Dynamic hot-plug udev rules for policies Cc: linux-raid@vger.kernel.org, Williams, Dan J <dan.j.williams@intel.com>, Ciechanowski, Ed <ed.ciechanowski@intel.com>
When introducing policies, new hot-plug rules were added to support
bare disks. Mdadm was started for each hot plugged block device
to determine if it could be used as spare or as a replacement member for
degraded array.
This patch introduces limitation of range of devices that are handled
by mdadm.
It limits them to the ones specified in domains associated with
the actions: spare-same-port, spare and spare-force.
In order to enable hot-plug for bare disks one must update udev rules
with command
mdadm --activate-domains[=filename]
Above command writes udev rule configuration to stdout. If 'filename'
is given output is written to the file provided as parameter. It is up
to system administrator what should be done later. To make such rule
permanent (i.e. remain after reboot) rule should be writen to
/lib/udev/rules.d directory. Other cases will just need to write it to
/dev/.udev/rules.d directory where temporary rules lies. One should be
aware of the meaning of names/priorities of the udev rules.
After mdadm.conf is changed one is obliged to re-run
"mdadm --activate-domains" command in order to bring the system
configuration up to date.
All hot-plugged disks containing metadata are still handled by existing
rules.
Adam Kwolek [Wed, 26 Jan 2011 20:56:21 +0000 (07:56 +1100)]
WORKAROUND: mdadm hangs during reshape
During reshape when reshape is finished in md, progress_reshape() hangs
on select().
This is because 'sync_completed' is reset to zero before 'sync_action'
becomes 'idle', and we don't look for notification on 'sync_action'.
So if completed becomes zero after reshape_progress has made some
progress, then deduce that reshape has finished.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 26 Jan 2011 20:31:25 +0000 (07:31 +1100)]
FIX: monitor doesn't handshake with md
when in container are present raid0 and raid5 arrays, and reshape order is:
1. raid0 array
2. raid5 array
mdadm cannot set new raid_disks for raid0 array. For this action md has to have
handshake with mdmon. We have the following conditions:
1. Raid0 is not monitored
2. raid0 has been just takeovered to raid4/5 (it has to be monitored
3. monitor has to start monitor new raid4/5 array
4. monitor is not started (it is started to second raid5 array)
In such situation pig_monitor is required to let know to m monitor about new array
(not in the starting monitor case only)
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun Marcin [Tue, 25 Jan 2011 06:44:12 +0000 (17:44 +1100)]
imsm: support for Intel SAS controller in get_disk_controller_domain handler
get_disk_controller_domain recognizes Intel (R) SAS controller (isci).
The function returns three different strings that differentiate disk attached
to AHCI, ISCI or unknown controller types to create separate domains
for each case.
Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun Marcin [Tue, 25 Jan 2011 06:44:11 +0000 (17:44 +1100)]
imsm: detail_platform_imsm supports Intel SAS controller (isci driver)
Added support in detail_platform_imsm for Intel (R) SAS controller.
Function supports AHCI and ISCI controllers. RAID properties are derived
from common OROM for both types.
Based on code From: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun Marcin [Tue, 25 Jan 2011 06:44:11 +0000 (17:44 +1100)]
imsm: prepare detail_platform_imsm to support different types of controllers
Pull out the AHCI specific parts of detail_platform_imsm to separate functions.
Introduce support new types of controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Labun Marcin [Tue, 25 Jan 2011 06:44:11 +0000 (17:44 +1100)]
imsm: support for Intel(R) SAS controller in imsm handler
add_to_super_imsm handler is able to recognize new type of controller.
It stores the controller information in its structures and blocks
mixing of different controller type in the same container.
In this way it maintains compatibility between Linux and Windows IMSM RAID
stacks. IMSM metadata does not allow arrays to span on devices attached to
different storage controllers.
Based on code From: Artur Wojcik <artur.wojcik@intel.com> Signed-off-by: Marcin Labun <marcin.labun@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:44:11 +0000 (17:44 +1100)]
FIX: Reset disk state if disk is missing
If we can't read actual disk state, it shoud be initiated
to 0.
Overwise it may be out of date value resulting false action
later in code (e.g. set disk to improper state).
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:44:11 +0000 (17:44 +1100)]
Check number of failed disks durig raid10->raid0 takeover
Number of failed disks MUST be half of initial number of disks.
If number of failed disks is different we should not update
metadata- data corruption may occur after array reassemlation.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:44:10 +0000 (17:44 +1100)]
raid0->raid10 takeover- process metadata update
Implementation of raid0->raid10 takeover metadata update
at process_update level.
- We are using memory previously allocated in prepare_update to
create two dummy disks will be inserted in the metadata and
new imsm_dev structure with expanded disk order table.
- Update indexes in disk list
- Update metadata map
- Update disk order table
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:44:10 +0000 (17:44 +1100)]
raid0->raid10 takeover- allocate memory for added disks
Allocate memory will be used in process_update.
For raid0->raid10 takeover operation number of disks doubles
so we should allocate memory for additional disks
and one imsm_dev structure with extended order table.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:44:10 +0000 (17:44 +1100)]
raid0->raid10 takeover- create metadata update
Create metadata update for raid0 -> raid10 takeover.
Because we have no mdmon running for raid0 we have to
update metadata using local update mechanism
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Tue, 25 Jan 2011 06:49:03 +0000 (17:49 +1100)]
Add raid10 -> raid0 takeover support
The patch introduces takeover from level 10 to level 0 for imsm
metadata. This patch contains procedures connected with preparing
and applying metadata update during 10 -> 0 takeover.
When performing takeover 10->0 mdmon should update the external
metadata (due to disk slot and level changes).
To achieve that mdadm calls reshape_super() and prepare
the "update_takeover" metadata update type.
Prepared update is processed by mdmon in process_update().
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Tue, 25 Jan 2011 22:47:06 +0000 (08:47 +1000)]
Fix some issues with setting 'new' state of a reshape
- when reshaping a container, ->reshape_active is already set
even though it isn't really active yet, so we need to set
the new geometry even when reshape_active is set. This is safe.
- When restarting a reshape, make sure the reshape_position is set
appropriately when external metadata is used.
NeilBrown [Mon, 24 Jan 2011 20:56:53 +0000 (07:56 +1100)]
Don't close fds in write_init_super
We previously closed all 'fds' associated with an array in
write_init_super .. sometimes, and sometimes at bad times.
This isn't neat and free_super is a better place to close them.
So make sure free_super always closes the fds that the metadata
manager kept hold of, and stop closing them in write_init_super.
Also add a few more calls to free_super to make sure they really do
get closed.
Reported-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Thu, 20 Jan 2011 20:59:53 +0000 (07:59 +1100)]
Fix management of backed-up region for hi-to-low reshapes.
When reshaping from the end of the array to the start, for times
when the number of data devices is decreasing, the handling of the
backup area isn't a simple mirror of the handling on low-to-hi
reshapes as the backup areas is always low in the array.
Krzysztof Wojcik [Mon, 17 Jan 2011 01:56:43 +0000 (12:56 +1100)]
Unfreeze for non re-striping transitions
For non re-striping transitions array must be unfrozen
before end of processing.
For restriping transitions we normally let the child
unfreeze the array but in this case there is no child.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Krzysztof Wojcik [Mon, 17 Jan 2011 01:53:31 +0000 (12:53 +1100)]
Set reshape.after.data_disks for raid0<->raid10 takeover
reshape.after.data_disks field must be initiated
for raid0<->raid10 transition.
Instead calculated spares_needed variable in reshape_array
function has random value.
Signed-off-by: Krzysztof Wojcik <krzysztof.wojcik@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Mon, 17 Jan 2011 01:44:52 +0000 (12:44 +1100)]
FIX: sync_completed == 0 causes reshape cancellation in metadata
md signals reshape completion (whole area or parts) by setting
sync_completed to 0. This causes in set_array_state() to rollback
metadata changes (super-intel.c:4977. To avoid this do not allow for
set last_checkpoint to 0 if reshape is finished.
This was also root cause of my previous fix for finalization reshape
that I agreed earlier is not necessary,
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Mon, 17 Jan 2011 01:38:13 +0000 (12:38 +1100)]
FIX: mdadm throws coredump on exit in error case
When mdadm falls in "reduce size" error on takeovered array it jumps
to release and tries execute backward takeover. This time sra pointer
is not initialized and coredump is generated.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Czarnowska, Anna [Thu, 13 Jan 2011 13:22:16 +0000 (13:22 +0000)]
fix: segfault if subarray is monitored but container is not
In this situation to->parent is null so "to" doesn't change to
parent container and to->metadata is still null.
This results in segmentation fault when checking
to->metadata->ss->external.
We should just skip this array as container is needed to move spares to.
Signed-off-by: Anna Czarnowska <anna.czarnowska@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
NeilBrown [Sun, 16 Jan 2011 22:53:56 +0000 (09:53 +1100)]
Add 'restart' arg to various functions used for reshaping.
When we restart an array in the middle of a reshape, we reuse a lot of
the code for starting the reshape, but it needs to know that
circumstances are slightly different.
So add a 'restart' arg which is used:
- skip checking and adding spares
- activate the array (rather than start reshape)
- allow the backup file to already exist
NeilBrown [Wed, 12 Jan 2011 23:44:52 +0000 (10:44 +1100)]
reshape_array: move lots of code out of a 'switch'.
Everything other than the 'child' part of the 'switch(fork)' returns
quickly, so leave them inside the switch but move the other large bit
out so as to make the flow of code more natural.
NeilBrown [Wed, 12 Jan 2011 23:39:34 +0000 (10:39 +1100)]
Fix up calls to unfrozen at end of reshape.
1/ don't pass 'frozen' as an arg to unfreeze - just use it
to conditionally call 'unfreeze'.
2/ Always unfreeze at end of reshape_container
3/ Only unfreeze at end of reshape_array if not 'forked'. So when
reshape_array is called from reshape_container it doesn't unfreeze,
but when called directly.
Adam Kwolek [Wed, 12 Jan 2011 23:16:07 +0000 (10:16 +1100)]
imsm: FIX: spares are not counted
Field info->array.spare_disks is used on begin of reshape_array() to
check if there is enough number of spares to process reshape. During
container_content_imsm() call spare disks are not counted. This
causes that reshape_array() reports that there is not enough spares to
execute reshape.
Patch adds spares counting for reshape process.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 12 Jan 2011 23:15:54 +0000 (10:15 +1100)]
FIX: Cannot load container information
When container is passed to grow_reshape(), load_container() function
has to be used to get all required information from metadata.
So load_super is never correct here - in particular, cfd is a
'container fd' so we must 'load_container' on it.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 12 Jan 2011 23:06:29 +0000 (10:06 +1100)]
imsm: FIX: old devices memory has to be released
When process_update() replaces memory for bigger devices, old memory
areas are collected in a list and has to be assigned in to pointer in
update for later release.
List created from old devices is created and attached to space_list
for later releasing.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 12 Jan 2011 23:05:31 +0000 (10:05 +1100)]
imsm: FIX: local mdadm update shouldn't be done in update creation function.
Local update is performed based on created update, so this code can broke
local update and it is not necessary as prepare and process update functions
are used.
Code removed.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Adam Kwolek [Wed, 12 Jan 2011 23:04:33 +0000 (10:04 +1100)]
imsm: FIX: mdadm should process local data
When update is created by mdadm, local information should be updated
also. This makes us to prepare one update for mdmon and second
"update" to maintain local changes. we can use prepared update for
"local/mdadm" metadata update purposes.
We have 2 cases:
1. when metadata is updated by mdmon, we avoid metadata reloading in
mdadm.
we proceed the same updtate 2 times:
- one time in mdadm for "local update"
- second time in mdmon for real metadat update
2. when metadata is updated by mdadm (no mdmon running) updates are
processed in the same way.
- one time in mdadm for "local update"
- there is no "second time" update but mdadm just flushes
metadata to array
This let us to avoid code duplication by using prepare and process
update functions as for update via mdmon. This makes update
preparing mdmon independent and there is no need to maintain the
same thing in 2 places in code.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>
Kwolek, Adam [Wed, 12 Jan 2011 10:42:44 +0000 (21:42 +1100)]
FIX: size is passed incorrectly
reshape_super() called from reshape_container() with size set to
info->component_size gives size in reshape_super == -2 due to unsigned
signed conversion (info->component_size is not initializes).
As size is not changed during container reshape '-1' value is passed
to indicate this.
Signed-off-by: Adam Kwolek <adam.kwolek@intel.com> Signed-off-by: NeilBrown <neilb@suse.de>