In 3c50032ff528 (attr: ignore overly large gitattributes files,
2022-12-01), we backported a patch onto v2.30.* that was originally
based on a much newer version. The v2.30.* release train still has the
GETTEXT_POISON CI job, though, and hence needs `test_i18n*` in its
tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Mon, 9 Aug 2021 22:48:39 +0000 (18:48 -0400)]
range-diff: handle unterminated lines in read_patches()
When parsing our buffer of output from git-log, we have a
find_end_of_line() helper that finds the next newline, and gives us the
number of bytes to move past it, or the size of the whole remaining
buffer if there is no newline.
But trying to handle both those cases leads to some oddities:
- we try to overwrite the newline with NUL in the caller, by writing
over line[len-1]. This is at best redundant, since the helper will
already have done so if it saw a newline. But if it didn't see a
newline, it's actively wrong; we'll overwrite the byte at the end of
the (unterminated) line.
We could solve this just dropping the extra NUL assignment in the
caller and just letting the helper do the right thing. But...
- if we see a "diff --git" line, we'll restore the newline on top of
the NUL byte, so we can pass the string to parse_git_diff_header().
But if there was no newline in the first place, we can't do this.
There's no place to put it (the current code writes a newline
over whatever byte we obliterated earlier). The best we can do is
feed the complete remainder of the buffer to the function (which is,
in fact, a string, by virtue of being a strbuf).
To solve this, the caller needs to know whether we actually found a
newline or not. We could modify find_end_of_line() to return that
information, but we can further observe that it has only one caller.
So let's just inline it in that caller.
Nobody seems to have noticed this case, probably because git-log would
never produce input that doesn't end with a newline. Arguably we could
just return an error as soon as we see that the output does not end in a
newline. But the code to do so actually ends up _longer_, mostly because
of the cleanup we have to do in handling the error.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In dfa6b32b5e59 (attr: ignore attribute lines exceeding 2048 bytes,
2022-12-01), we backported a patch onto v2.30.* that was originally
based on a much newer version. The v2.30.* release train still has the
GETTEXT_POISON CI job, though, and hence needs `test_i18n*` in its
tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In e47363e5a8bd (t0033: add tests for safe.directory, 2022-04-13), we
backported a patch onto v2.30.* that was originally based on a much
newer version. The v2.30.* release train still has the GETTEXT_POISON
CI job, though, and hence needs `test_i18n*` in its tests.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Tue, 17 Jan 2023 03:04:48 +0000 (22:04 -0500)]
http: support CURLOPT_PROTOCOLS_STR
The CURLOPT_PROTOCOLS (and matching CURLOPT_REDIR_PROTOCOLS) flag was
deprecated in curl 7.85.0, and using it generate compiler warnings as of
curl 7.87.0. The path forward is to use CURLOPT_PROTOCOLS_STR, but we
can't just do so unilaterally, as it was only introduced less than a
year ago in 7.85.0.
Until that version becomes ubiquitous, we have to either disable the
deprecation warning or conditionally use the "STR" variant on newer
versions of libcurl. This patch switches to the new variant, which is
nice for two reasons:
- we don't have to worry that silencing curl's deprecation warnings
might cause us to miss other more useful ones
- we'd eventually want to move to the new variant anyway, so this gets
us set up (albeit with some extra ugly boilerplate for the
conditional)
There are a lot of ways to split up the two cases. One way would be to
abstract the storage type (strbuf versus a long), how to append
(strbuf_addstr vs bitwise OR), how to initialize, which CURLOPT to use,
and so on. But the resulting code looks pretty magical:
GIT_CURL_PROTOCOL_TYPE allowed = GIT_CURL_PROTOCOL_TYPE_INIT;
if (...http is allowed...)
GIT_CURL_PROTOCOL_APPEND(&allowed, "http", CURLOPT_HTTP);
and you end up with more "#define GIT_CURL_PROTOCOL_TYPE" macros than
actual code.
On the other end of the spectrum, we could just implement two separate
functions, one that handles a string list and one that handles bits. But
then we end up repeating our list of protocols (http, https, ftp, ftp).
This patch takes the middle ground. The run-time code is always there to
handle both types, and we just choose which one to feed to curl.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jiang Xin [Fri, 25 Nov 2022 09:59:54 +0000 (17:59 +0800)]
ci: install python on ubuntu
Python is missing from the default ubuntu-22.04 runner image, which
prevents git-p4 from working. To install python on ubuntu, we need
to provide the correct package names:
* On Ubuntu 18.04 (bionic), "/usr/bin/python2" is provided by the
"python" package, and "/usr/bin/python3" is provided by the "python3"
package.
* On Ubuntu 20.04 (focal) and above, "/usr/bin/python2" is provided by
the "python2" package which has a different name from bionic, and
"/usr/bin/python3" is provided by "python3".
Since the "ubuntu-latest" runner image has a higher version, its
safe to use "python2" or "python3" package name.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Mon, 9 Aug 2021 22:47:42 +0000 (18:47 -0400)]
range-diff: drop useless "offset" variable from read_patches()
The "offset" variable was was introduced in 44b67cb62b (range-diff:
split lines manually, 2019-07-11), but it has never done anything
useful. We use it to count up the number of bytes we've consumed, but we
never look at the result. It was probably copied accidentally from an
almost-identical loop in apply.c:find_header() (and the point of that
commit was to make use of the parse_git_diff_header() function which
underlies both).
Because the variable was set but not used, most compilers didn't seem to
notice, but the upcoming clang-14 does complain about it, via its
-Wunused-but-set-variable warning.
Signed-off-by: Jeff King <peff@peff.net> Acked-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 17 Jan 2023 03:04:44 +0000 (22:04 -0500)]
http: prefer CURLOPT_SEEKFUNCTION to CURLOPT_IOCTLFUNCTION
The IOCTLFUNCTION option has been deprecated, and generates a compiler
warning in recent versions of curl. We can switch to using SEEKFUNCTION
instead. It was added in 2008 via curl 7.18.0; our INSTALL file already
indicates we require at least curl 7.19.4.
But there's one catch: curl says we should use CURL_SEEKFUNC_{OK,FAIL},
and those didn't arrive until 7.19.5. One workaround would be to use a
bare 0/1 here (or define our own macros). But let's just bump the
minimum required version to 7.19.5. That version is only a minor version
bump from our existing requirement, and is only a 2 month time bump for
versions that are almost 13 years old. So it's not likely that anybody
cares about the distinction.
Switching means we have to rewrite the ioctl functions into seek
functions. In some ways they are simpler (seeking is the only
operation), but in some ways more complex (the ioctl allowed only a full
rewind, but now we can seek to arbitrary offsets).
Curl will only ever use SEEK_SET (per their documentation), so I didn't
bother implementing anything else, since it would naturally be
completely untested. This seems unlikely to change, but I added an
assertion just in case.
Likewise, I doubt curl will ever try to seek outside of the buffer sizes
we've told it, but I erred on the defensive side here, rather than do an
out-of-bounds read.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Jeff King [Tue, 17 Jan 2023 03:04:38 +0000 (22:04 -0500)]
http-push: prefer CURLOPT_UPLOAD to CURLOPT_PUT
The two options do exactly the same thing, but the latter has been
deprecated and in recent versions of curl may produce a compiler
warning. Since the UPLOAD form is available everywhere (it was
introduced in the year 2000 by curl 7.1), we can just switch to it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
compat/nedmalloc/nedmalloc.c: In function 'DestroyCaches':
compat/nedmalloc/nedmalloc.c:326:12: error: the comparison will always
evaluate as 'true' for the address of 'caches'
will never be NULL [-Werror=address]
326 | if(p->caches)
| ^
compat/nedmalloc/nedmalloc.c:196:22: note: 'caches' declared here
196 | threadcache *caches[THREADCACHEMAXCACHES];
| ^~~~~~
... and it is correct, of course.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:53 +0000 (17:59 +0800)]
ci: use the same version of p4 on both Linux and macOS
There would be a segmentation fault when running p4 v16.2 on ubuntu
22.04 which is the latest version of ubuntu runner image for github
actions.
By checking each version from [1], p4d version 21.1 and above can work
properly on ubuntu 22.04. But version 22.x will break some p4 test
cases. So p4 version 21.x is exactly the version we can use.
With this update, the versions of p4 for Linux and macOS happen to be
the same. So we can add the version number directly into the "P4WHENCE"
variable, and reuse it in p4 installation for macOS.
By removing the "LINUX_P4_VERSION" variable from "ci/lib.sh", the
comment left above has nothing to do with p4, but still applies to
git-lfs. Since we have a fixed version of git-lfs installed on Linux,
we may have a different version on macOS.
[1]: https://cdist2.perforce.com/perforce/
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:52 +0000 (17:59 +0800)]
ci: remove the pipe after "p4 -V" to catch errors
When installing p4 as a dependency, we used to pipe output of "p4 -V"
and "p4d -V" to validate the installation and output a condensed version
information. But this would hide potential errors of p4 and would stop
with an empty output. E.g.: p4d version 16.2 running on ubuntu 22.04
causes sigfaults, even before it produces any output.
By removing the pipe after "p4 -V" and "p4d -V", we may get a
verbose output, and stop immediately on errors because we have "set
-e" in "ci/lib.sh". Since we won't look at these trace logs unless
something fails, just including the raw output seems most sensible.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Fri, 25 Nov 2022 09:59:51 +0000 (17:59 +0800)]
github-actions: run gcc-8 on ubuntu-20.04 image
GitHub starts to upgrade its runner image "ubuntu-latest" from version
"ubuntu-20.04" to version "ubuntu-22.04". It will fail to find and
install "gcc-8" package on the new runner image.
Change the runner image of the `linux-gcc` job from "ubuntu-latest" to
"ubuntu-20.04" in order to install "gcc-8" as a dependency.
Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git for Windows' SDK recently upgraded to GCC v12.x which points out
that the `pos` variable might be used even after the corresponding
memory was `realloc()`ed and therefore potentially no longer valid.
Since a subset of this SDK is used in Git's CI/PR builds, we need to fix
this to continue to be able to benefit from the CI/PR runs.
Note: This bug has been with us since 2a6b149c64f6 (mingw: avoid using
strbuf in syslog, 2011-10-06), and while it looks tempting to replace
the hand-rolled string manipulation with a `strbuf`-based one, that
commit's message explains why we cannot do that: The `syslog()` function
is called as part of the function in `daemon.c` which is set as the
`die()` routine, and since `strbuf_grow()` can call that function if it
runs out of memory, this would cause a nasty infinite loop that we do
not want to re-introduce.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Johnson [Fri, 10 Mar 2023 13:04:33 +0000 (13:04 +0000)]
ls-files: fix "--format" output of relative paths
Fix a bug introduced with the "--format" option in ce74de93 (ls-files: introduce "--format" option, 2022-07-23),
where relative paths were computed using the output buffer,
which could lead to random garbage data in the output.
Signed-off-by: Adam Johnson <me@adamj.eu> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When accepting a packfile in git-receive-pack(1), we feed that packfile
into git-index-pack(1) to generate the packfile index. As the packfile
would often only contain unreachable objects until the references have
been updated, concurrently running garbage collection might be tempted
to delete the packfile right away and thus cause corruption. To fix
this, we ask git-index-pack(1) to create a `.keep` file before moving
the packfile into place, which is getting deleted again once all of the
reference updates have been processed.
Now in production systems we have observed that those `.keep` files are
sometimes not getting deleted as expected, where the result is that
repositories tend to grow packfiles that are never deleted over time.
This seems to be caused by a race when git-receive-pack(1) is killed
after we have migrated the kept packfile from the quarantine directory
into the main object database. While this race window is typically small
it can be extended for example by installing a `proc-receive` hook.
Fix this race by registering the lockfile as a tempfile so that it will
automatically be removed at exit or when receiving a signal.
Helped-by: Jeff King <peff@peff.net> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the list of files as input was implemented in 6508eedf67
(t/aggregate-results: accomodate systems with small max argument list
length, 2010-06-01), a much simpler solution wasn't considered.
Let's just pass the directory as an argument.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Wed, 8 Mar 2023 18:47:32 +0000 (18:47 +0000)]
object-file: reprepare alternates when necessary
When an object is not found in a repository's object store, we sometimes
call reprepare_packed_git() to see if the object was temporarily moved
into a new pack-file (and its old pack-file or loose object was
deleted). This process does a scan of each pack directory within each
odb, but does not reevaluate if the odb list needs updating.
Extend reprepare_packed_git() to also reprepare the alternate odb list
by setting loaded_alternates to zero and calling prepare_alt_odb(). This
will add newly-discoverd odbs to the linked list, but will not duplicate
existing ones nor will it remove existing ones that are no longer listed
in the alternates file. Do this under the object read lock to avoid
readers from interacting with a potentially incomplete odb being added
to the odb list.
If the alternates file was edited to _remove_ some alternates during the
course of the Git process, Git will continue to see alternates that were
ever valid for that repository. ODBs are not removed from the list, the
same as the existing behavior before this change. Git already has
protections against an alternate directory disappearing from the
filesystem during the lifetime of a process, and those are still in
effect.
This change is specifically for concurrent changes to the repository, so
it is difficult to create a test that guarantees this behavior is
correct. I manually verified by introducing a reprepare_packed_git() call
into get_revision() and stepped into that call in a debugger with a
parent 'git log' process. Multiple runs of prepare_alt_odb() kept
the_repository->objects->odb as a single-item chain until I added a
.git/objects/info/alternates file in a different process. The next run
added the new odb to the chain and subsequent runs did not add to the
chain.
Signed-off-by: Derrick Stolee <derrickstolee@github.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Wed, 8 Mar 2023 22:22:05 +0000 (22:22 +0000)]
fetch: pass --no-write-fetch-head to subprocesses
It seems a user would expect this option would work regardless
of whether it's fetching from a single remote, many remotes,
or recursing into submodules.
Signed-off-by: Eric Wong <e@80x24.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Making things even more confusing, you'll get that error only if the
unmerged entry is alphabetically the first changed file. Otherwise, we
simply stick the unrecognized line to the end of the previous hunk.
There it's mostly harmless, as it eventually gets fed back to "git
apply", which happily ignores it. But it's still shown to the user
attached to the hunk, which is wrong.
So let's handle these lines as a noop. There's not really anything
useful to do with a conflicted merge in this case, and that's what we do
for other cases like "add -p". There we get a "diff --cc" line, which we
accept as starting a new file, but we refuse to use any of its hunks
(their headers start with "@@@" and not "@@ ", so we silently ignore
them).
It seems like simply recognizing the line and continuing in our parsing
loop would work. But we actually need to run the rest of the loop body
to handle matching up our colored/filtered output. But that code assumes
that we have some active file_diff we're working on. So instead, we'll
just insert a dummy entry into our array. This ends up the same as if we
saw a "diff --cc" line (a file with no hunks).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Mar 2023 06:12:37 +0000 (01:12 -0500)]
format-patch: add format.noprefix option
The previous commit dropped support for diff.noprefix in format-patch.
While this will do the right thing in most cases (where sending patches
without a prefix was an accidental side effect of the sender preferring
to see their local patches without prefixes), it left no good option for
a project or workflow where you really do want to send patches without
prefixes. You'd be stuck using "--no-prefix" for every invocation.
So let's add a config option specific to format-patch that enables this
behavior. That gives people who have such a workflow a way to get what
they want, but makes it hard to accidentally trigger it.
A more backwards-compatible way of doing the transition would be to have
format.noprefix default to diff.noprefix when it's not set. But that
doesn't really help the "accidental" problem; people would have to
manually set format.noprefix=false. And it's unlikely that anybody
really wants format.noprefix=true in the first place. I'm adding it here
mostly as an escape hatch, not because anybody has expressed any
interest in it.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Mar 2023 06:11:49 +0000 (01:11 -0500)]
format-patch: do not respect diff.noprefix
The output of format-patch respects diff.noprefix, but this usually ends
up being a hassle for people receiving the patch, as they have to
manually specify "-p0" in order to apply it.
I don't think there was any specific intention for it to behave this
way. The noprefix option is handled by git_diff_ui_config(), and
format-patch exists in a gray area between plumbing and porcelain.
People do look at the output, and we'd expect it to colorize things,
respect their choice of algorithm, and so on. But this particular option
creates problems for the receiver (in theory so does diff.mnemonicprefix,
but since we are always formatting commits, the mnemonic prefixes will
always be "a/" and "b/").
So let's disable it. The slight downsides are:
- people who have set diff.noprefix presumably like to see their
patches without prefixes. If they use format-patch to review their
series, they'll see prefixes. On the other hand, it is probably a
good idea for them to look at what will actually get sent out.
We could try to play games here with "is stdout a tty", as we do for
color. But that's not a completely reliable signal, and it's
probably not worth the trouble. If you want to see the patch with
the usual bells and whistles, then you are better off using "git
log" or "git show".
- if a project really does have a workflow that likes prefix-less
patches, and the receiver is prepared to use "-p0", then the sender
now has to manually say "--no-prefix" for each format-patch
invocation. That doesn't seem _too_ terrible given that the receiver
has to manually say "-p0" for each git-am invocation.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Mar 2023 06:09:54 +0000 (01:09 -0500)]
diff: add --default-prefix option
You can change the output of prefixes with diff.noprefix and
diff.mnemonicprefix, but there's no easy way to override them from the
command-line. We do have "--no-prefix", but there's no way to get back
to the default prefix. So let's add an option to do that.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Mar 2023 06:07:45 +0000 (01:07 -0500)]
t4013: add tests for diff prefix options
We don't have any specific test coverage of diff's various prefix
options. We do incidentally invoke them in a few places, but it's worth
having a more thorough set of tests that covers all of the effects we
expect to see, and that the options kick in at the appropriate times.
This will be especially useful as the next patch adds more options.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 9 Mar 2023 06:07:06 +0000 (01:07 -0500)]
diff: factor out src/dst prefix setup
We directly manipulate diffopt's a_prefix and b_prefix to set up either
the default "a/foo" prefix or the "--no-prefix" variant. Although this
is only a few lines, it's worth pulling these into their own functions.
That lets us avoid one repetition already in this patch, but will also
give us a cleaner interface for callers which want to tweak this
setting.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sequencer.c: fix overflow & segfault in parse_strategy_opts()
The split_cmdline() function introduced in [1] returns an "int". If
it's negative it signifies an error. The option parsing in [2] didn't
account for this, and assigned the value directly to the "size_t
xopts_nr". We'd then attempt to loop over all of these elements, and
access uninitialized memory.
There's a few things that use this for option parsing, but one way to
trigger it is with a bad value to "-X <strategy-option>", e.g:
git rebase -X"bad argument\""
In another context this might be a security issue, but in this case
someone who's already able to inject arguments directly to our
commands would be past other defenses, making this potential
escalation a moot point.
As the example above & test case shows the error reporting leaves
something to be desired. The function will loop over the
whitespace-split values, but when it encounters an error we'll only
report the first element, which is OK, not the second "argument\""
whose quote is unbalanced.
This is an inherent limitation of the current API, and the issue
affects other API users. Let's not attempt to fix that now. If and
when that happens these tests will need to be adjusted to assert the
new output.
1. 2b11e3170e9 (If you have a config containing something like this:,
2006-06-05)
2. ca6c6b45dd9 (sequencer (rebase -i): respect strategy/strategy_opts
settings, 2017-01-02)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user might not necessarily know why ff only was configured, maybe an
admin did it, or the installer (Git for Windows), or perhaps they just
followed some online advice.
This can happen not only on pull.ff=only, but merge.ff=only too.
Even worse if the user has configured pull.rebase=false and
merge.ff=only, because in those cases a diverging merge will constantly
keep failing. There's no trivial way to get out of this other than
`git merge --no-ff`.
Let's not assume our users are experts in git who completely understand
all their configurations.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com> Acked-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 4 Mar 2023 10:31:22 +0000 (05:31 -0500)]
parse-options: consistently allocate memory in fix_filename()
When handling OPT_FILENAME(), we have to stick the "prefix" (if any) in
front of the filename to make up for the fact that Git has chdir()'d to
the top of the repository. We can do this with prefix_filename(), but
there are a few special cases we handle ourselves.
Unfortunately the memory allocation is inconsistent here; if we do make
it to prefix_filename(), we'll allocate a string which the caller must
free to avoid a leak. But if we hit our special cases, we'll return the
string as-is, and a caller which tries to free it will crash. So there's
no way to win.
Let's consistently allocate, so that callers can do the right thing.
There are now three cases to care about in the function (and hence a
three-armed if/else):
1. we got a NULL input (and should leave it as NULL, though arguably
this is the sign of a bug; let's keep the status quo for now and we
can pick at that scab later)
2. we hit a special case that means we leave the name intact; we
should duplicate the string. This includes our special "-"
matching. Prior to this patch, it also included empty prefixes and
absolute filenames. But we can observe that prefix_filename()
already handles these, so we don't need to detect them.
3. everything else goes to prefix_filename()
I've dropped the "const" from the "char **file" parameter to indicate
that we're allocating, though in practice it's not really important.
This is all being shuffled through a void pointer via opt->value before
it hits code which ever looks at the string. And it's even a bit weird,
because we are really taking _in_ a const string and using the same
out-parameter for a non-const string. A better function signature would
be:
but that would mean the caller dereferences the double-pointer (and the
NULL check is currently handled inside this function). So I took the
path of least-change here.
Note that we have to fix several callers in this commit, too, or we'll
break the leak-checking tests. These are "new" leaks in the sense that
they are now triggered by the test suite, but these spots have always
been leaky when Git is run in a subdirectory of the repository. I fixed
all of the cases that trigger with GIT_TEST_PASSING_SANITIZE_LEAK. There
may be others in scripts that have other leaks, but we can fix them
later along with those other leaks (and again, you _couldn't_ fix them
before this patch, so this is the necessary first step).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 4 Mar 2023 10:27:56 +0000 (05:27 -0500)]
bundle: don't blindly apply prefix_filename() to "-"
A user can specify a filename to a command from the command line,
either as the value given to a command line option, or a command
line argument. When it is given as a relative filename, in the
user's mind, it is relative to the directory "git" was started from,
but by the time the filename is used, "git" would almost always have
chdir()'ed up to the root level of the working tree.
The given filename, if it is relative, needs to be prefixed with the
path to the current directory, and it typically is done by calling
prefix_filename() helper function. For commands that can also take
"-" to use the standard input or the standard output, however, this
needs to be done with care.
"git bundle create" uses the next word on the command line as the
output filename, and can take "-" to mean "write to the standard
output". It blindly called prefix_filename(), so running it in a
subdirectory did not quite work as expected.
Introduce a new helper, prefix_filename_except_for_dash(), and use
it to help "git bundle create" codepath.
Reported-by: Michael Henry Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 4 Mar 2023 10:26:40 +0000 (05:26 -0500)]
bundle: document handling of "-" as stdin
We have always allowed "bundle create -" to write to stdout, but it was
never documented. And a recent patch let reading operations like "bundle
list-heads -" read from stdin.
Let's document all of these cases.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 4 Mar 2023 10:26:14 +0000 (05:26 -0500)]
bundle: let "-" mean stdin for reading operations
For writing, "bundle create -" indicates that the bundle should be
written to stdout. But there's no matching handling of "-" for reading
operations. This is inconsistent, and a little inflexible (though one
can always use "/dev/stdin" on systems that support it).
However, it's easy to change. Once upon a time, the bundle-reading code
required a seekable descriptor, but that was fixed long ago in e9ee84cf28b (bundle: allowing to read from an unseekable fd,
2011-10-13). So we just need to handle "-" explicitly when opening the
file.
We _could_ do this by handling "-" in read_bundle_header(), which the
reading functions all call already. But that is probably a bad idea.
It's also used by low-level code like the transport functions, and we
may want to be more careful there. We do not know that stdin is even
available to us, and certainly we would not want to get confused by a
configured URL that happens to point to "-".
So instead, let's add a helper to builtin/bundle.c. Since both the
bundle code and some of the callers refer to the bundle by name for
error messages, let's use the string "<stdin>" to make the output a bit
nicer to read.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sat, 4 Mar 2023 10:55:13 +0000 (05:55 -0500)]
bundle: turn on --all-progress-implied by default
In 79862b6b77c (bundle-create: progress output control, 2019-11-10),
"bundle create" learned about the --all-progress and
--all-progress-implied options, which were copied from pack-objects.
I think these were a mistake.
In pack-objects, "all-progress-implied" is about switching the behavior
between a regular on-disk "git repack" and the use of pack-objects for
push/fetch (where a fetch does not want progress from the server during
the write stage; the client will print progress as it receives the
data). But there's no such distinction for bundles. Prior to 79862b6b77c, we always printed the write stage. Afterwards, a vanilla:
git bundle create foo.bundle
omits the write progress, appearing to hang (especially if your
repository is large or your disk is slow). That seems like a regression.
It's possible that the flexibility to disable the write-phase progress
_could_ be useful for bundle. E.g., if you did something like:
But if you are running both in real-time, why are you using bundles in
the first place? You're better off doing a real fetch.
But even if we did want to support that, it should be the exception, and
vanilla "bundle create" should display the full progress. So we'd want
to name the option "--no-write-progress" or something.
The "--all-progress" option itself is even worse. It exists in
pack-objects only for historical reasons. It's a mistake because it
implies "--progress", and we added "--all-progress-implied" to fix that.
There is no reason to propagate that mistake to new commands.
Likewise, the documentation for these options was pulled from
pack-objects. But it doesn't make any sense in this context. It talks
about "--stdout", but that is not even an option that git-bundle
supports.
This patch flips the default for "--all-progress-implied" back to
"true", fixing the regression in 79862b6b77c. This turns that option
into a noop, and means that "--all-progress" is really the same as
"--progress". We _could_ drop them completely, but since they've been
shipped with Git since v2.25.0, it's polite to continue accepting them.
I didn't implement any sort of "--no-write-progress" here. I'm not at
all convinced it's necessary, and the discussion from the original
thread:
shows that that the main focus was on getting --progress and --quiet
support, and not any kind of clever "real-time bundle over the network"
feature. But technically this patch is making it impossible to do
something that you _could_ do post-79862b6b77c.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
John Keeping [Fri, 3 Mar 2023 16:03:01 +0000 (16:03 +0000)]
format-patch: output header for empty commits
When formatting an empty commit, it is surprising that a totally empty
file is generated. Set the flag to always print the header, matching
the behaviour of git-log.
Signed-off-by: John Keeping <john@keeping.me.uk> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZheNing Hu [Wed, 1 Mar 2023 10:20:29 +0000 (10:20 +0000)]
push: allow delete single-level ref
We discourage the creation/update of single-level refs
because some upper-layer applications only work in specified
reference namespaces, such as "refs/heads/*" or "refs/tags/*",
these single-level refnames may not be recognized. However,
we still hope users can delete them which have been created
by mistake.
Therefore, when updating branches on the server with
"git receive-pack", by checking whether it is a branch deletion
operation, it will determine whether to allow the update of
a single-level refs. This avoids creating/updating such
single-level refs, but allows them to be deleted.
On the client side, "git push" also does not properly fill in
the old-oid of single-level refs, which causes the server-side
"git receive-pack" to think that the ref's old-oid has changed
when deleting single-level refs, this causes the push to be
rejected. So the solution is to fix the client to be able to
delete single-level refs by properly filling old-oid.
Signed-off-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZheNing Hu [Wed, 1 Mar 2023 10:20:28 +0000 (10:20 +0000)]
receive-pack: fix funny ref error messsage
When the user deletes the remote one level branch through
"git push origin -d refs/foo", remote will return an error:
"refusing to create funny ref 'refs/foo' remotely", here we
are not creating "refs/foo" instead wants to delete it, so a
better error description here would be: "refusing to update
funny ref 'refs/foo' remotely".
Signed-off-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 1 Mar 2023 00:38:47 +0000 (16:38 -0800)]
Merge branch 'jk/http-test-fixes'
Various fix-ups on HTTP tests.
* jk/http-test-fixes:
t5559: make SSL/TLS the default
t5559: fix test failures with LIB_HTTPD_SSL
t/lib-httpd: enable HTTP/2 "h2" protocol, not just h2c
t/lib-httpd: respect $HTTPD_PROTO in expect_askpass()
t5551: drop curl trace lines without headers
t5551: handle v2 protocol in cookie test
t5551: simplify expected cookie file
t5551: handle v2 protocol in upload-pack service test
t5551: handle v2 protocol when checking curl trace
t5551: stop forcing clone to run with v0 protocol
t5551: handle HTTP/2 when checking curl trace
t5551: lower-case headers in expected curl trace
t5551: drop redundant grep for Accept-Language
t5541: simplify and move "no empty path components" test
t5541: stop marking "used receive-pack service" test as v0 only
t5541: run "used receive-pack service" test earlier
René Scharfe [Tue, 28 Feb 2023 16:13:27 +0000 (17:13 +0100)]
range-diff: avoid compiler warning when char is unsigned
Since 2b15969f61 (range-diff: let '--abbrev' option takes effect,
2023-02-20), GCC 11.3 on Ubuntu 22.04 on aarch64 warns (and errors
out if the make variable DEVELOPER is set):
range-diff.c: In function ‘output_pair_header’:
range-diff.c:388:20: error: comparison is always false due to limited range of data type [-Werror=type-limits]
388 | if (abbrev < 0)
| ^
cc1: all warnings being treated as errors
That's because char is unsigned on that platform. Use int instead, just
like in struct diff_options, to copy the value faithfully.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Gwyneth Morgan [Mon, 27 Feb 2023 20:27:18 +0000 (20:27 +0000)]
signature-format.txt: note SSH and X.509 signature delimiters
This document only explains PGP signatures, but Git now supports X.509
signatures as of 1e7adb9756 (gpg-interface: introduce new signature
format "x509" using gpgsm, 2018-07-17), and SSH signatures as of 29b315778e (ssh signing: add ssh key format and signing code,
2021-09-10).
Additionally, explain that these signature formats are controlled
`gpg.format`, linking to its documentation, and explain in said
`gpg.format` documentation that the underlying signature format is
documented in signature-format.txt.
Signed-off-by: Gwyneth Morgan <gwymor@tilde.club> Signed-off-by: Junio C Hamano <gitster@pobox.com>
credential: add WWW-Authenticate header to cred requests
Add the value of the WWW-Authenticate response header to credential
requests. Credential helpers that understand and support HTTP
authentication and authorization can use this standard header (RFC 2616
Section 14.47 [1]) to generate valid credentials.
WWW-Authenticate headers can contain information pertaining to the
authority, authentication mechanism, or extra parameters/scopes that are
required.
The current I/O format for credential helpers only allows for unique
names for properties/attributes, so in order to transmit multiple header
values (with a specific order) we introduce a new convention whereby a
C-style array syntax is used in the property name to denote multiple
ordered values for the same property.
In this case we send multiple `wwwauth[]` properties where the order
that the repeated attributes appear in the conversation reflects the
order that the WWW-Authenticate headers appeared in the HTTP response.
Add a set of tests to exercise the HTTP authentication header parsing
and the interop with credential helpers. Credential helpers will receive
WWW-Authenticate information in credential requests.
Read and store the HTTP WWW-Authenticate response headers made for
a particular request.
This will allow us to pass important authentication challenge
information to credential helpers or others that would otherwise have
been lost.
libcurl only provides us with the ability to read all headers recieved
for a particular request, including any intermediate redirect requests
or proxies. The lines returned by libcurl include HTTP status lines
delinating any intermediate requests such as "HTTP/1.1 200". We use
these lines to reset the strvec of WWW-Authenticate header values as
we encounter them in order to only capture the final response headers.
The collection of all header values matching the WWW-Authenticate
header is complicated by the fact that it is legal for header fields to
be continued over multiple lines, but libcurl only gives us each
physical line a time, not each logical header. This line folding feature
is deprecated in RFC 7230 [1] but older servers may still emit them, so
we need to handle them.
In the future [2] we may be able to leverage functions to read headers
from libcurl itself, but as of today we must do this ourselves.
t5563: add tests for basic and anoymous HTTP access
Add a test showing simple anoymous HTTP access to an unprotected
repository, that results in no credential helper invocations.
Also add a test demonstrating simple basic authentication with
simple credential helper support.
Leverage a no-parsed headers (NPH) CGI script so that we can directly
control the HTTP responses to simulate a multitude of good, bad and ugly
remote server implementations around auth.
Signed-off-by: Matthew John Cheetham <mjcheetham@outlook.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 27 Feb 2023 18:08:57 +0000 (10:08 -0800)]
Merge branch 'jc/countermand-format-attach'
The format.attach configuration variable lacked a way to override a
value defined in a lower-priority configuration file (e.g. the
system one) by redefining it in a higher-priority configuration
file. Now, setting format.attach to an empty string means show the
patch inline in the e-mail message, without using MIME attachment.
This is a backward incompatible change.
* jc/countermand-format-attach:
format.attach: allow empty value to disable multi-part messages
sscanf(3) used in "git symbolic-ref --short" implementation found
to be not working reliably on macOS in UTF-8 locales. Rewrite the
code to avoid sscanf() altogether to work it around.
Junio C Hamano [Mon, 27 Feb 2023 18:08:57 +0000 (10:08 -0800)]
Merge branch 'rs/archive-mtime'
"git archive HEAD^{tree}" records the paths with the current
timestamp in the archive, making it harder to obtain a stable
output. The command learned the --mtime option to specify an
arbitrary timestamp (e.g. --mtime="@0 +0000" for the epoch).
Andy Koppe [Sun, 26 Feb 2023 18:43:54 +0000 (18:43 +0000)]
restore: fault --staged --worktree with merge opts
The 'restore' command already rejects the --merge, --conflict, --ours
and --theirs options when combined with --staged, but accepts them when
--worktree is added as well.
Unfortunately that doesn't appear to do anything useful. The --ours and
--theirs options seem to be ignored when both --staged and --worktree
are given, whereas with --merge or --conflict, the command has the same
effect as if the --staged option wasn't present.
So reject those options with '--staged --worktree' as well, using
opts->accept_ref to distinguish restore from checkout.
Add test for both '--staged' and '--staged --worktree'.
Signed-off-by: Andy Koppe <andy.koppe@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Eric Wong [Sun, 12 Feb 2023 09:04:26 +0000 (09:04 +0000)]
fetch: support hideRefs to speed up connectivity checks
With roughly 800 remotes all fetching into their own
refs/remotes/$REMOTE/* island, the connectivity check[1] gets
expensive for each fetch on systems which lack sufficient RAM to
cache objects.
To do a no-op fetch on one $REMOTE out of hundreds, hideRefs now
allows the no-op fetch to take ~30 seconds instead of ~20 minutes
on a noisy, RAM-constrained machine (localhost, so no network latency):
Andrei Rybak [Sun, 26 Feb 2023 10:53:03 +0000 (11:53 +0100)]
test-lib: drop comment about test_description
When a comment describing how each test file should start was added in
commit [1], it was the second comment of t/test-lib.sh. The comment
describes how variable "test_description" is supposed to be assigned at
the top of each test file and how "test-lib.sh" should be used by
sourcing it. However, even in [1], the comment was ten lines away from
the usage of the variable by test-lib.sh. Since then, the comment has
drifted away both from the top of the file and from the usage of the
variable. The comment just sits in the middle of the initialization of
the test library, surrounded by unrelated code, almost one hundred lines
away from the usage of "test_description".
Nobody has noticed this drift during evolution of test-lib.sh, which
suggests that this comment has outlived its usefulness. The assignment
of "test_description", sourcing of "test-lib.sh" by tests, and the
process of writing tests in general are described in detail in
"t/README". So drop the obsolete comment.
An alternative solution could be to move the comment either to the top
of the file, or down to the usage of variable "test_description".
[1] e1970ce43a ("[PATCH 1/2] Test framework take two.", 2005-05-13)
Signed-off-by: Andrei Rybak <rybak.a.v@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:20 +0000 (15:28 +0000)]
unpack-trees: add usage notices around df_conflict_entry
Avoid making users believe they need to initialize df_conflict_entry
to something (as happened with other output only fields before) with
a quick comment and a small sanity check.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:19 +0000 (15:28 +0000)]
unpack-trees: special case read-tree debugging as internal usage
builtin/read-tree.c has some special functionality explicitly designed
for debugging unpack-trees.[ch]. Associated with that is two fields
that no other external caller would or should use. Mark these as
internal to unpack-trees, but allow builtin/read-tree to read or write
them for this special case.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:18 +0000 (15:28 +0000)]
unpack-trees: rewrap a few overlong lines from previous patch
The previous patch made many lines a little longer, resulting in four
becoming a bit too long. They were left as-is for the previous patch
to facilitate reviewers verifying that we were just adding "internal."
in a bunch of places, but rewrap them now.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:17 +0000 (15:28 +0000)]
unpack-trees: mark fields only used internally as internal
Continue the work from the previous patch by finding additional fields
which are only used internally but not yet explicitly marked as such,
and include them in the internal fields struct.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:16 +0000 (15:28 +0000)]
unpack_trees: start splitting internal fields from public API
This just splits the two fields already marked as internal-only into a
separate internal struct. Future commits will add more fields that
were meant to be internal-only but were not explicitly marked as such
to the same struct.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:15 +0000 (15:28 +0000)]
sparse-checkout: avoid using internal API of unpack-trees, take 2
Commit 2f6b1eb794 ("cache API: add a "INDEX_STATE_INIT" macro/function,
add release_index()", 2023-01-12) mistakenly added some initialization
of a member of unpack_trees_options that was intended to be
internal-only. This initialization should be done within
update_sparsity() instead.
Note that while o->result is mostly meant for unpack_trees() and
update_sparsity() mostly operates without o->result,
check_ok_to_remove() does consult it so we need to ensure it is properly
initialized.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:14 +0000 (15:28 +0000)]
sparse-checkout: avoid using internal API of unpack-trees
struct unpack_trees_options has the following field and comment:
struct pattern_list *pl; /* for internal use */
Despite the internal-use comment, commit e091228e17 ("sparse-checkout:
update working directory in-process", 2019-11-21) starting setting this
field from an external caller. At the time, the only way around that
would have been to modify unpack_trees() to take an extra pattern_list
argument, and there's a lot of callers of that function. However, when
we split update_sparsity() off as a separate function, with
sparse-checkout being the sole caller, the need to update other callers
went away. Fix this API problem by adding a pattern_list argument to
update_sparsity() and stop setting the internal o.pl field directly.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:13 +0000 (15:28 +0000)]
unpack-trees: clean up some flow control
The update_sparsity() function was introduced in commit 7af7a25853
("unpack-trees: add a new update_sparsity() function", 2020-03-27).
Prior to that, unpack_trees() was used, but that had a few bugs because
the needs of the caller were different, and different enough that
unpack_trees() could not easily be modified to handle both usecases.
The implementation detail that update_sparsity() was written by copying
unpack_trees() and then streamlining it, and then modifying it in the
needed ways still shows through in that there are leftover vestiges in
both functions that are no longer needed. Clean them up. In
particular:
* update_sparsity() allows a pattern list to be passed in, but
unpack_trees() never should use a different pattern list. Add a
check and a BUG() if this gets violated.
* update_sparsity() has a check early on that will BUG() if
o->skip_sparse_checkout is set; as such, there's no need to check
for that condition again later in the code. We can simply remove
the check and its corresponding goto label.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:11 +0000 (15:28 +0000)]
dir: add a usage note to exclude_per_dir
As evidenced by the fix a couple commits ago, places in the code using
exclude_per_dir are likely buggy and should be adapted to call
setup_standard_excludes() instead. Unfortunately, the usage of
exclude_per_dir has been hardcoded into the arguments ls-files accepts,
so we cannot actually remove it. Add a note that it is deprecated and
no other callers should use it directly.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:10 +0000 (15:28 +0000)]
dir: separate public from internal portion of dir_struct
In order to make it clearer to callers what portions of dir_struct are
public API, and avoid errors from them setting fields that are meant as
internal API, split the fields used for internal implementation reasons
into a separate embedded struct.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:09 +0000 (15:28 +0000)]
unpack-trees: heed requests to overwrite ignored files
When a directory exists but has only ignored files within it and we are
trying to switch to a branch that has a file where that directory is,
the behavior depends upon --[no]-overwrite-ignore. If the user wants to
--overwrite-ignore (the default), then we should delete the ignored file
and directory and switch to the new branch.
The code to handle this in verify_clean_subdirectory() in unpack-trees
tried to handle this via paying attention to the exclude_per_dir setting
of the internal dir field. This came from commit c81935348b ("Fix
switching to a branch with D/F when current branch has file D.",
2007-03-15), which pre-dated 039bc64e88 ("core.excludesfile clean-up",
2007-11-14), and thus did not pay attention to ignore patterns from
other relevant files. Change it to use setup_standard_excludes() so
that it is also aware of excludes specified in other locations.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 27 Feb 2023 15:28:08 +0000 (15:28 +0000)]
t2021: fix platform-specific leftover cruft
t2021.6 existed to test the status of a symlink that was left around by
previous tests. It tried to also clean up the symlink after it was done
so that subsequent tests wouldn't be tripped up by it. Unfortunately,
since this test had a SYMLINK prerequisite, that made the cleanup
platform dependent...and made a testcase I was trying to add to this
testsuite fail (that testcase will be included in the next patch).
Before we go and add new testcases, fix this cleanup by moving it into a
separate test.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 26 Feb 2023 22:40:46 +0000 (17:40 -0500)]
drop pure pass-through config callbacks
Commit fd2d4c135e (gpg-interface: lazily initialize and read the
configuration, 2023-02-09) shrunk a few custom config callbacks so that
they are just one-liners of:
return git_default_config(...);
We can drop them entirely and replace them direct calls of
git_default_config() intead. This makes the code a little shorter and
easier to understand (with the downside being that if they do grow
custom options again later, we'll have to recreate the functions).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 26 Feb 2023 22:29:43 +0000 (17:29 -0500)]
fsck: check even zero-entry index files
In fb64ca526a (fsck: check index files in all worktrees, 2023-02-24), we
swapped out a call to vanilla repo_read_index() for a series of
read_index_from() calls, one per worktree. The code for the latter was
copied from add_index_objects_to_pending(), which checks for a positive
return value from the index reading function, and we do the same here in
fsck now.
But this is probably the wrong thing. I had interpreted the check as
"don't operate on the index struct if there was an error". But in
reality, if there is an error then the index-reading code will simply
die (which admittedly is not great for fsck, but that is not a new
problem).
The return value here is actually the number of entries read. So it
makes sense for add_index_objects_to_pending() to ignore a zero-entry
index (there is nothing to add). But for fsck, we would still want to
check any extensions, etc (though presumably it is unlikely to have them
in an empty index, I don't think it's impossible).
So we should ignore the return value from read_index_from() entirely.
This matches the behavior before fb64ca526a, when we ignored the return
value from repo_read_index().
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
