Taylor Blau [Wed, 13 Jan 2021 22:24:27 +0000 (17:24 -0500)]
rebuild_existing_bitmaps(): convert to new revindex API
Remove another instance of looking at the revindex directly by instead
calling 'pack_pos_to_index()'. Unlike other patches, this caller only
cares about the index position of each object in the loop.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:24:05 +0000 (17:24 -0500)]
try_partial_reuse(): convert to new revindex API
Remove another instance of direct revindex manipulation by calling
'pack_pos_to_offset()' instead (the caller here does not care about the
index position of the object at position 'pos').
Note that we cannot just use the existing "offset" variable to store the
value we get from pack_pos_to_offset(). It is incremented by
unpack_object_header(), but we later need the original value. Since
we'll no longer have revindex->offset to read it from, we'll store that
in a separate variable ("header" since it points to the entry's header
bytes).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:24:00 +0000 (17:24 -0500)]
get_size_by_pos(): convert to new revindex API
Remove another caller that holds onto a 'struct revindex_entry' by
replacing the direct indexing with calls to 'pack_pos_to_offset()' and
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:23:56 +0000 (17:23 -0500)]
show_objects_for_type(): convert to new revindex API
Avoid storing the revindex entry directly, since this structure will
soon be removed from the public interface. Instead, store the offset and
index position by calling 'pack_pos_to_offset()' and
'pack_pos_to_index()', respectively.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:23:47 +0000 (17:23 -0500)]
check_object(): convert to new revindex API
Replace direct accesses to the revindex with calls to
'offset_to_pack_pos()' and 'pack_pos_to_index()'.
Since this caller already had some error checking (it can jump to the
'give_up' label if it encounters an error), we can easily check whether
or not the provided offset points to an object in the given pack. This
error checking existed prior to this patch, too, since the caller checks
whether the return value from 'find_pack_revindex()' was NULL or not.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:23:35 +0000 (17:23 -0500)]
write_reuse_object(): convert to new revindex API
First replace 'find_pack_revindex()' with its replacement
'offset_to_pack_pos()'. This prevents any bogus OFS_DELTA that may make
its way through until 'write_reuse_object()' from causing a bad memory
read (if 'revidx' is 'NULL')
Next, replace a direct access of '->nr' with the wrapper function
'pack_pos_to_index()'.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Wed, 13 Jan 2021 22:23:31 +0000 (17:23 -0500)]
pack-revindex: introduce a new API
In the next several patches, we will prepare for loading a reverse index
either in memory (mapping the inverse of the .idx's contents in-core),
or directly from a yet-to-be-introduced on-disk format. To prepare for
that, we'll introduce an API that avoids the caller explicitly indexing
the revindex pointer in the packed_git structure.
There are four ways to interact with the reverse index. Accordingly,
four functions will be exported from 'pack-revindex.h' by the time that
the existing API is removed. A caller may:
1. Load the pack's reverse index. This involves opening up the index,
generating an array, and then sorting it. Since opening the index
can fail, this function ('load_pack_revindex()') returns an int.
Accordingly, it takes only a single argument: the 'struct
packed_git' the caller wants to build a reverse index for.
This function is well-suited for both the current and new API.
Callers will have to continue to open the reverse index explicitly,
but this function will eventually learn how to detect and load a
reverse index from the on-disk format, if one exists. Otherwise, it
will fallback to generating one in memory from scratch.
2. Convert a pack position into an offset. This operation is now
called `pack_pos_to_offset()`. It takes a pack and a position, and
returns the corresponding off_t.
Any error simply calls BUG(), since the callers are not well-suited
to handle a failure and keep going.
3. Convert a pack position into an index position. Same as above; this
takes a pack and a position, and returns a uint32_t. This operation
is known as `pack_pos_to_index()`. The same thinking about error
conditions applies here as well.
4. Find the pack position for a given offset. This operation is now
known as `offset_to_pack_pos()`. It takes a pack, an offset, and a
pointer to a uint32_t where the position is written, if an object
exists at that offset. Otherwise, -1 is returned to indicate
failure.
Unlike some of the callers that used to access '->offset' and '->nr'
directly, the error checking around this call is somewhat more
robust. This is important since callers should always pass an offset
which points at the boundary of two objects. The API, unlike direct
access, enforces that that is the case.
This will become important in a subsequent patch where a caller
which does not but could check the return value treats the signed
`-1` from `find_revindex_position()` as an index into the 'revindex'
array.
Two design warts are carried over into the new API:
- Asking for the index position of an out-of-bounds object will result
in a BUG() (since no such object exists), but asking for the offset
of the non-existent object at the end of the pack returns the total
size of the pack.
This makes it convenient for callers who always want to take the
difference of two adjacent object's offsets (to compute the on-disk
size) but don't want to worry about boundaries at the end of the
pack.
- offset_to_pack_pos() lazily loads the reverse index, but
pack_pos_to_index() doesn't (callers of the former are well-suited
to handle errors, but callers of the latter are not).
Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update the CoC added in 5cdf2301 (add a Code of Conduct document,
2019-09-24 from version 1.4 to version 2.0. This is the version found
at [1] with the following minor changes:
- We preserve the change to the CoC in 3f9ef874a73 (CODE_OF_CONDUCT:
mention individual project-leader emails, 2019-09-26)
- We preserve the custom intro added in 5cdf2301d4a (add a Code of
Conduct document, 2019-09-24)
This change intentionally preserves a warning emitted on "git diff
--check". It's better to make it easily diff-able with upstream than
to fix whitespace changes in our version while we're at it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Acked-by: Christian Couder <chriscool@tuxfamily.org> Acked-by: Derrick Stolee <dstolee@microsoft.com> Acked-by: Elijah Newren <newren@gmail.com> Acked-by: Johannes Schindelin <johannes.schindelin@gmx.de> Acked-by: Jonathan Nieder <jrnieder@gmail.com> Acked-by: brian m. carlson <sandals@crustytoothpaste.net> Acked-by: Jeff King <peff@peff.net> Acked-by: Taylor Blau <me@ttaylor.com> Acked-by: Jonathan Tan <jonathantanmy@google.com> Acked-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Tue, 12 Jan 2021 08:21:59 +0000 (09:21 +0100)]
fetch-pack: refactor writing promisor file
Let's replace the 2 different pieces of code that write a
promisor file in 'builtin/repack.c' and 'fetch-pack.c'
with a new function called 'write_promisor_file()' in
'pack-write.c' and 'pack.h'.
This might also help us in the future, if we want to put
back the ref names and associated hashes that were in
the promisor files we are repacking in 'builtin/repack.c'
as suggested by a NEEDSWORK comment just above the code
we are refactoring.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Tue, 12 Jan 2021 08:21:58 +0000 (09:21 +0100)]
fetch-pack: rename helper to create_promisor_file()
As we are going to refactor the code that actually writes
the promisor file into a separate function in a following
commit, let's rename the current write_promisor_file()
function to create_promisor_file().
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove support for the magical "repo-abbrev" comment in .mailmap
files. This was added to .mailmap parsing in [1], as a generalized
feature of the git-shortlog Perl script added earlier in [2].
There was no documentation or tests for this feature, and I don't
think it's used in practice anymore.
What it did was to allow you to specify a single string to be
search-replaced with "/.../" in the .mailmap file. E.g. for
linux.git's current .mailmap:
git archive --remote=git@gitlab.com:linux-kernel/linux.git \
HEAD -- .mailmap | grep -a repo-abbrev
# repo-abbrev: /pub/scm/linux/kernel/git/
Merge tag [...]git.kernel.org/pub/scm/linux/kernel/git/tip/tip
I think at this point this is just a historical artifact we can get
rid of. It was initially meant for Linus's own use when we integrated
the Perl script[2], but since then it seems he's stopped using it.
Digging through Linus's release announcements on the LKML[3] the last
release I can find that made use of this output is Linux 2.6.25-rc6
back in March 2008[4]. Later on Linus started using --no-merges[5],
and nowadays seems to prefer some custom not-quite-shortlog format of
merges from lieutenants[6].
You will still see it on linux.git if you run "git shortlog" manually
yourself with --merges, with this removed you can still get the same
output with:
git log --pretty=fuller v5.10-rc7..v5.10 |
sed 's!/pub/scm/linux/kernel/git/!/.../!g' |
git shortlog
Arguably we should do the same for the search-replacing of "[PATCH]"
at the beginning with "". That seems to be another relic of a bygone
era when linux.git patches would have their E-Mail subject lines
applied as-is by "git am" or whatever. But we documented that feature
in "git-shortlog(1)", and it seems more widely applicable than
something purely kernel-specific.
1. 7595e2ee6ef (git-shortlog: make common repository prefix
configurable with .mailmap, 2006-11-25)
2. fa375c7f1b6 (Add git-shortlog perl script, 2005-06-04)
3. https://lore.kernel.org/lkml/
4. https://lore.kernel.org/lkml/alpine.LFD.1.00.0803161651350.3020@woody.linux-foundation.org/
5. https://lore.kernel.org/lkml/BANLkTinrbh7Xi27an3uY7pDWrNKhJRYmEA@mail.gmail.com/
6. https://lore.kernel.org/lkml/CAHk-=wg1+kf1AVzXA-RQX0zjM6t9J2Kay9xyuNqcFHWV-y5ZYw@mail.gmail.com/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap doc + tests: document and test for case-insensitivity
Add documentation and more tests for case-insensitivity. The existing
test only matched on the E-Mail part, but as shown here we also match
the name with strcasecmp().
This behavior was last discussed on the mailing list in the thread
starting at [1]. It seems we're keeping it like this, so let's
document it.
Reported-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap doc + tests: add better examples & test them
Change the mailmap documentation added in 0925ce4d49 (Add map_user()
and clear_mailmap() to mailmap, 2009-02-08) to continue discussing the
Jane/Joe example. I think this makes things a lot less confusing as
we're building up more complex examples using one set of data which
covers all the things we'd like to discuss.
Also add tests to assert that what our documentation says is what's
actually happening. This is mostly (or entirely) covered by existing
tests which I'm not deleting, but having these tests for the synopsis
makes it easier to follow-along while reading the tests & docs.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: refactor a few tests to use "test_commit --append"
Refactor a few more tests to use the new "--append" option to
"test_commit". I added it for use in the mailmap tests, but this
demonstrates how useful it is in general.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib functions: add an --append option to test_commit
Add an --append option to test_commit to append <contents> to the
<file> we're writing to. This simplifies a lot of test setup, as shown
in some of the tests being changed here.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib functions: add --author support to test_commit
Add support for --author to "test_commit". This will simplify some
current and future tests, one of those is being changed here.
Let's also line-wrap the "git commit" command invocation to make diffs
that add subsequent options easier to add, as they'll only need to add
a new option line.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
test-lib functions: document arguments to test_commit
The --notick argument was added in [1] and was followed by --signoff
in [2], but neither of these commits added any documentation for these
options. When -C was added in [3] a comment was added to document it,
but not the other options. Let's document all of these options.
1. 44b85e89d7 (t7003: add test to filter a branch with a commit at
epoch, 2012-07-12),
2. 5ed75e2a3f (cherry-pick: don't forget -s on failure, 2012-09-14).
3. 6f94351b0a (test-lib-functions.sh: teach test_commit -C <dir>,
2016-12-08)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expand the comment template for "test_commit" to match that of
"test_commit_bulk" added in b1c36cb849 (test-lib: introduce
test_commit_bulk, 2019-07-02). It has several undocumented options,
which won't all fit on one line. Follow-up commit(s) will document
them.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap: test for silent exiting on missing file/blob
That we silently ignore missing mailmap.file or mailmap.blob values is
intentional. See 938a60d64f (mailmap: clean up read_mailmap error
handling, 2012-12-12). However, nothing tested for this. Let's do that
by checking that stderr is empty in those cases.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap tests: get rid of overly complex blame fuzzing
Change a test that used a custom fuzzing function since bfdfa3d414 (t4203 (mailmap): stop hardcoding commit ids and dates,
2010-10-15) to just use the "blame --porcelain" output instead.
We could use the same pattern as 0ba9c9a0fb (t8008: rely on
rev-parse'd HEAD instead of sha1 value, 2017-07-26) does to do this,
but there wouldn't be any point. We're not trying to test "blame"
output here in general, just that "blame" pays attention to the
mailmap.
So it's sufficient to get the blamed line(s) and authors from the
output, which is much easier with the "--porcelain" option.
It would still be possible for there to be a bug in "blame" such that
it uses the mailmap for its "--porcelain" output, but not the regular
output. Let's test for that simply by checking if specifying the
mailmap changes the output.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove a redundant line in a test added in d20d654fe8 (Change current
mailmap usage to do matching on both name and email of
author/committer., 2009-02-08).
This didn't conceivably test anything useful and is most likely a
copy/paste error.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdin tests setup the "contact" file in the main setup, let's
instead set it up in the test that uses it.
Also refactor the first test so it's obvious that the point of it is
that "check-mailmap" will spew its input as-is when given no
argument. For that one we can just use the "expect" file as-is.
Also add tests for how other "--stdin" cases are handled, e.g. one
where we actually do a mapping.
For the rest of --stdin testing we just assume we're going to get the
same output. We could follow-up and make sure everything's
round-tripped through both --stdin and the file/blob backends, but I
don't think there's much point in that.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
* Setup "actual" test files in the body of "test_expect_success"
* Don't have X of "test_expect_success X Y" be an unquoted string.
* Not to carry over test config between tests, and instead use
"test_config".
* Replace various "echo" a line-at-a-time patterns with here-docs.
* Change a case of "log.mailmap=False" to use the lower-case
"false". Both work, but this ends up in git-config's boolean
parsing and these atypical values are tested for elsewhere. Let's
use the lower-case to not draw the reader's attention to this
abnormality.
* Remove commentary asserting that things work a given way in favor
of simply testing for it, i.e. in the case of a .mailmap file
outside of the repository.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap tests: use our preferred whitespace syntax
Change these tests to use the preferred whitespace around ">",
"<<-EOF" etc. This is an initial step in larger and more meaningful
refactoring of the file, which makes a subsequent commit easier to
read.
I'm not changing the whitespace of "echo <str> > file" patterns to
"echo <str> >file" because all of those will be changed to here-docs
in a subsequent commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap doc: start by mentioning the comment syntax
Mentioning the comment syntax and blank line support first is in line
with how "git help config" describes its format. See b8936cf060 (config.txt grammar, typo, and asciidoc fixes, 2006-06-08)
for the paragraph I'm copying & amending from its documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a passing mention of the mailmap.file and mailmap.blob
configuration options. Before this addition a reader of the
"check-mailmap" manpage would have no idea that a custom map could be
specified, unless they'd happen to e.g. come across it in the "config"
manpage first.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Quote the mailmap.file and mailmap.blob configuration variables as
`mailmap.file` and `mailmap.blob`, and link to git-config(1). This is
in line with the preferred way of doing this in the rest of our
documentation.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mailmap doc: create a new "gitmailmap(5)" man page
Create a gitmailmap(5) page similar to how .gitmodules and .gitignore
have their own pages at gitmodules(5) and gitignore(5). Now instead of
"check-mailmap", "blame" and "shortlog" documentation including the
description of the format we link to one canonical place.
This makes things easier for readers, since in our manpage or
web-based[1] output it's not clear that the "MAPPING AUTHORS" sections
aren't subtly different, as opposed to just included.
1. https://git-scm.com/docs/git-check-mailmap
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: implement support for atomic reference updates
When executing a fetch, then git will currently allocate one reference
transaction per reference update and directly commit it. This means that
fetches are non-atomic: even if some of the reference updates fail,
others may still succeed and modify local references.
This is fine in many scenarios, but this strategy has its downsides.
- The view of remote references may be inconsistent and may show a
bastardized state of the remote repository.
- Batching together updates may improve performance in certain
scenarios. While the impact probably isn't as pronounced with loose
references, the upcoming reftable backend may benefit as it needs to
write less files in case the update is batched.
- The reference-update hook is currently being executed twice per
updated reference. While this doesn't matter when there is no such
hook, we have seen severe performance regressions when doing a
git-fetch(1) with reference-transaction hook when the remote
repository has hundreds of thousands of references.
Similar to `git push --atomic`, this commit thus introduces atomic
fetches. Instead of allocating one reference transaction per updated
reference, it causes us to only allocate a single transaction and commit
it as soon as all updates were received. If locking of any reference
fails, then we abort the complete transaction and don't update any
reference, which gives us an all-or-nothing fetch.
Note that this may not completely fix the first of above downsides, as
the consistent view also depends on the server-side. If the server
doesn't have a consistent view of its own references during the
reference negotiation phase, then the client would get the same
inconsistent view the server has. This is a separate problem though and,
if it actually exists, can be fixed at a later point.
This commit also changes the way we write FETCH_HEAD in case `--atomic`
is passed. Instead of writing changes as we go, we need to accumulate
all changes first and only commit them at the end when we know that all
reference updates succeeded. Ideally, we'd just do so via a temporary
file so that we don't need to carry all updates in-memory. This isn't
trivially doable though considering the `--append` mode, where we do not
truncate the file but simply append to it. And given that we support
concurrent processes appending to FETCH_HEAD at the same time without
any loss of data, seeding the temporary file with current contents of
FETCH_HEAD initially and then doing a rename wouldn't work either. So
this commit implements the simple strategy of buffering all changes and
appending them to the file on commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: allow passing a transaction to `s_update_ref()`
The handling of ref updates is completely handled by `s_update_ref()`,
which will manage the complete lifecycle of the reference transaction.
This is fine right now given that git-fetch(1) does not support atomic
fetches, so each reference gets its own transaction. It is quite
inflexible though, as `s_update_ref()` only knows about a single
reference update at a time, so it doesn't allow us to alter the
strategy.
This commit prepares `s_update_ref()` and its only caller
`update_local_ref()` to allow passing an external transaction. If none
is given, then the existing behaviour is triggered which creates a new
transaction and directly commits it. Otherwise, if the caller provides a
transaction, then we only queue the update but don't commit it. This
optionally allows the caller to manage when a transaction will be
committed.
Given that `update_local_ref()` is always called with a `NULL`
transaction for now, no change in behaviour is expected from this
change.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fetch: refactor `s_update_ref` to use common exit path
The cleanup code in `s_update_ref()` is currently duplicated for both
succesful and erroneous exit paths. This commit refactors the function
to have a shared exit path for both cases to remove the duplication.
Suggested-by: Christian Couder <christian.couder@gmail.com> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit refactors `append_fetch_head()` to use a `struct strbuf` for
formatting the update which we're about to append to the FETCH_HEAD
file. While the refactoring doesn't have much of a benefit right now, it
serves as a preparatory step to implement atomic fetches where we need
to buffer all updates to FETCH_HEAD and only flush them out if all
reference updates succeeded.
No change in behaviour is expected from this commit.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a fetch with the default `--write-fetch-head` option, we
write all updated references to FETCH_HEAD while the updates are
performed. Given that updates are not performed atomically, it means
that we we write to FETCH_HEAD even if some or all of the reference
updates fail.
Given that we simply update FETCH_HEAD ad-hoc with each reference, the
logic is completely contained in `store_update_refs` and thus quite hard
to extend. This can already be seen by the way we skip writing to the
FETCH_HEAD: instead of having a conditional which simply skips writing,
we instead open "/dev/null" and needlessly write all updates there.
We are about to extend git-fetch(1) to accept an `--atomic` flag which
will make the fetch an all-or-nothing operation with regards to the
reference updates. This will also require us to make the updates to
FETCH_HEAD an all-or-nothing operation, but as explained doing so is not
easy with the current layout. This commit thus refactors the wa we write
to FETCH_HEAD and pulls out the logic to open, append to, commit and
close the file. While this may seem rather over-the top at first,
pulling out this logic will make it a lot easier to update the code in a
subsequent commit. It also allows us to easily skip writing completely
in case `--no-write-fetch-head` was passed.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function `git_config_parse_parameter` is responsible for parsing a
`foo.bar=baz`-formatted configuration key, sanitizing the key and then
processing it via the given callback function. Given that we're about to
add a second user which is going to process keys which already has keys
and values separated, this commit extracts a function
`config_parse_pair` which only does the sanitization and processing
part as a preparatory step.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 12 Jan 2021 12:26:49 +0000 (13:26 +0100)]
quote: make sq_dequote_step() a public function
We provide a function for dequoting an entire string, as well as one for
handling a space-separated list of quoted strings. But there's no way
for a caller to parse a string like 'foo'='bar', even though it is easy
to generate one using sq_quote_buf() or similar.
Let's make the single-step function available to callers outside of
quote.c. Note that we do need to adjust its implementation slightly: it
insists on seeing whitespace between items, and we'd like to be more
flexible than that. Since it only has a single caller, we can move that
check (and slurping up any extra whitespace) into that caller.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
config: add new way to pass config via `--config-env`
While it's already possible to pass runtime configuration via `git -c
<key>=<value>`, it may be undesirable to use when the value contains
sensitive information. E.g. if one wants to set `http.extraHeader` to
contain an authentication token, doing so via `-c` would trivially leak
those credentials via e.g. ps(1), which typically also shows command
arguments.
To enable this usecase without leaking credentials, this commit
introduces a new switch `--config-env=<key>=<envvar>`. Instead of
directly passing a value for the given key, it instead allows the user
to specify the name of an environment variable. The value of that
variable will then be used as value of the key.
Co-authored-by: Jeff King <peff@peff.net> Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 12 Jan 2021 15:52:32 +0000 (10:52 -0500)]
patch-ids: handle duplicate hashmap entries
This fixes a bug introduced in dfb7a1b4d0 (patch-ids: stop using a
hand-rolled hashmap implementation, 2016-07-29) in which
git rev-list --cherry-pick A...B
will fail to suppress commits reachable from A even if a commit with
matching patch-id appears in B.
Around the time of that commit, the algorithm for "--cherry-pick" looked
something like this:
0. Traverse all of the commits, marking them as being on the left or
right side of the symmetric difference.
1. Iterate over the left-hand commits, inserting a patch-id struct for
each into a hashmap, and pointing commit->util to the patch-id
struct.
2. Iterate over the right-hand commits, checking which are present in
the hashmap. If so, we exclude the commit from the output _and_ we
mark the patch-id as "seen".
3. Iterate again over the left-hand commits, checking whether
commit->util->seen is set; if so, exclude them from the output.
At the end, we'll have eliminated commits from both sides that have a
matching patch-id on the other side. But there's a subtle assumption
here: for any given patch-id, we must have exactly one struct
representing it. If two commits from A both have the same patch-id and
we allow duplicates in the hashmap, then we run into a problem:
a. In step 1, we insert two patch-id structs into the hashmap.
b. In step 2, our lookups will find only one of these structs, so only
one "seen" flag is marked.
c. In step 3, one of the commits in A will have its commit->util->seen
set, but the other will not. We'll erroneously output the latter.
Prior to dfb7a1b4d0, our hashmap did not allow duplicates. Afterwards,
it used hashmap_add(), which explicitly does allow duplicates.
At that point, the solution would have been easy: when we are about to
add a duplicate, skip doing so and return the existing entry which
matches. But it gets more complicated.
In 683f17ec44 (patch-ids: replace the seen indicator with a commit
pointer, 2016-07-29), our step 3 goes away entirely. Instead, in step 2,
when the right-hand side finds a matching patch_id from the left-hand
side, we can directly mark the left-hand patch_id->commit to be omitted.
Solving that would be easy, too; there's a one-to-many relationship of
patch-ids to commits, so we just need to keep a list.
But there's more. Commit b3dfeebb92 (rebase: avoid computing unnecessary
patch IDs, 2016-07-29) built on that by lazily computing the full
patch-ids. So we don't even know when adding to the hashmap whether two
commits truly have the same id. We'd have to tentatively assign them a
list, and then possibly split them apart (possibly into N new structs)
at the moment we compute the real patch-ids. This could work, but it's
complicated and error-prone.
Instead, let's accept that we may store duplicates, and teach the lookup
side to be more clever. Rather than asking for a single matching
patch-id, it will need to iterate over all matching patch-ids. This does
mean examining every entry in a single hash bucket, but the worst-case
for a hash lookup was already doing that.
We'll keep the hashmap details out of the caller by providing a simple
iteration interface. We can retain the simple has_commit_patch_id()
interface for the other callers, but we'll simplify its return value
into an integer, rather than returning the patch_id struct. That way
they won't be tempted to look at the "commit" field of the return value
without iterating.
Reported-by: Arnaud Morin <arnaud.morin@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 11 Jan 2021 19:25:10 +0000 (14:25 -0500)]
Documentation/git-clone.txt: document race with --local
When running 'git clone --local', the operation may fail if another
process is modifying the source repository. Document that this race
condition is known to hopefully help anyone who may run into it.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Tue, 12 Jan 2021 02:27:03 +0000 (21:27 -0500)]
bundle: arguments can be read from stdin
In order to create an incremental bundle, we need to pass many arguments
to let git-bundle ignore some already packed commits. It will be more
convenient to pass args via stdin. But the current implementation does
not allow us to do this.
This is because args are parsed twice when creating bundle. The first
time for parsing args is in `compute_and_write_prerequisites()` by
running `git-rev-list` command to write prerequisites in bundle file,
and stdin is consumed in this step if "--stdin" option is provided for
`git-bundle`. Later nothing can be read from stdin when running
`setup_revisions()` in `create_bundle()`.
The solution is to parse args once by removing the entire function
`compute_and_write_prerequisites()` and then calling function
`setup_revisions()`. In order to write prerequisites for bundle, will
call `prepare_revision_walk()` and `traverse_commit_list()`. But after
calling `prepare_revision_walk()`, the object array `revs.pending` is
left empty, and the following steps could not work properly with the
empty object array (`revs.pending`). Therefore, make a copy of `revs`
to `revs_copy` for later use right after calling `setup_revisions()`.
The copy of `revs_copy` is not a deep copy, it shares the same objects
with `revs`. The object array of `revs` has been cleared, but objects
themselves are still kept. Flags of objects may change after calling
`prepare_revision_walk()`, we can use these changed flags without
calling the `git rev-list` command and parsing its output like the
former implementation.
Also add testcases for git bundle in t6020, which read args from stdin.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is because when removing duplicate objects in function
`object_array_remove_duplicates()`, one unique pending object which has
the same name is deleted by mistake. The revision arg 'main^!' in the
above example is parsed by `handle_revision_arg()`, and at lease two
different objects will be appended to `revs.pending`, one points to the
parent commit of the "main" branch, and the other points to the tip
commit of the "main" branch. These two objects have the same name
"main". Only one object is left with the name "main" after calling the
function `object_array_remove_duplicates()`.
And what's worse, when adding boundary commits into pending list, we use
one-line commit message as names, and the arbitory names may surprise
git-bundle.
Only comparing objects themselves (".item") is also not good enough,
because user may want to create a bundle with two identical objects but
with different reference names, such as: "HEAD" and "refs/heads/main".
Add new function `contains_object()` which compare both the address and
the name of the object.
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jiang Xin [Tue, 12 Jan 2021 02:27:01 +0000 (21:27 -0500)]
test: add helper functions for git-bundle
Move git-bundle related functions from t5510 to a library, and this lib
will be shared with a new testcase t6020 which finds a known breakage of
"git-bundle".
Signed-off-by: Jiang Xin <zhiyou.jx@alibaba-inc.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Thu, 7 Jan 2021 10:36:59 +0000 (02:36 -0800)]
refs: allow @{n} to work with n-sized reflog
This sequence works
$ git checkout -b newbranch
$ git commit --allow-empty -m one
$ git show -s newbranch@{1}
and shows the state that was immediately after the newbranch was
created.
But then if you do
$ git reflog expire --expire=now refs/heads/newbranch
$ git commit --allow=empty -m two
$ git show -s newbranch@{1}
you'd be scolded with
fatal: log for 'newbranch' only has 1 entries
While it is true that it has only 1 entry, we have enough
information in that single entry that records the transition between
the state in which the tip of the branch was pointing at commit
'one' to the new commit 'two' built on it, so we should be able to
answer "what object newbranch was pointing at?". But we refuse to
do so.
Make @{0} the special case where we use the new side to look up that
entry. Otherwise, look up @{n} using the old side of the (n-1)th entry
of the reflog.
Suggested-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mostly remove the comment I added 5e9637c6297 (i18n: add
infrastructure for translating Git with gettext, 2011-11-18). Since
then we had a fix in 9c0495d23e6 (gettext.c: detect the vsnprintf bug
at runtime, 2013-12-01) so we're not running with the "set back to C
locale" hack on any modern system.
So having more than 1/4 of the file taken up by a digression about a
glibc bug that mostly doesn't happen to anyone anymore is just a
needless distraction. Shorten the comment to make a brief mention of
the bug, and where to find more info by looking at the git history for
this now-removed comment.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Makefile: remove a warning about old GETTEXT_POISON flag
Remove a migratory warning I added in 6cdccfce1e0 (i18n: make
GETTEXT_POISON a runtime option, 2018-11-08) to give anyone using that
option in their builds a heads-up about the change from compile-time
to runtime introduced in that commit.
It's been more than 2 years since then, anyone who ran into this is
likely to have made a change as a result, so removing this is long
overdue.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Sun, 10 Jan 2021 19:04:48 +0000 (19:04 +0000)]
docs: rephrase and clarify the git status --short format
The table describing the porcelain format in git-status(1) is helpful,
but it's not completely clear what the three sections mean, even to
some contributors. As a result, users are unable to find how to detect
common cases like merge conflicts programmatically.
Let's improve this situation by rephrasing to be more explicit about
what each of the sections in the table means, to tell users in plain
language which cases are occurring, and to describe what "unmerged"
means.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Denton Liu [Wed, 6 Jan 2021 09:01:53 +0000 (01:01 -0800)]
refs: factor out set_read_ref_cutoffs()
This block of code is duplicated twice. In a future commit, it will be
duplicated for a third time. Factor out the common functionality into
set_read_ref_cutoffs().
In the case of read_ref_at_ent(), we are incrementing `cb->reccnt` at the
beginning of the function. Move these to right before the return so that
the `cb->reccnt - 1` is changed to `cb->reccnt` and it can be cleanly
factored out into set_read_ref_cutoffs(). The duplication of the
increment statements will be removed in a future patch.
Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Utku Gultopu [Fri, 8 Jan 2021 16:54:56 +0000 (16:54 +0000)]
doc: remove "directory cache" from man pages
"directory cache" (or "directory cache index", "cache") are obsolete
terms which have been superseded by "index". Keeping them in the
documentation may be a source of confusion. This commit replaces
them with the current term, "index", on man pages.
Signed-off-by: Utku Gultopu <ugultopu@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Sun, 10 Jan 2021 03:23:09 +0000 (22:23 -0500)]
t5516: loosen "not our ref" error check
Commit 014ade7484 (upload-pack: send ERR packet for non-tip objects,
2019-04-13) added a test that greps the output of a failed fetch to make
sure that upload-pack sent us the ERR packet we expected. But checking
this is racy; despite the argument in that commit, the client may still
be sending a "done" line after the server exits, causing it to die() on
a failed write() and never see the ERR packet at all.
This fails quite rarely on Linux, but more often on macOS. However, it
can be triggered reliably with:
This is a real user-visible race that it would be nice to fix, but it's
tricky to do so: the client would have to speculatively try to read an
ERR packet after hitting a write() error. And at least for this error,
it's specific to v0 (since v2 does not enforce reachability at all).
So let's loosen the test to avoid annoying racy failures. If we
eventually do the read-after-failed-write thing, we can tighten it. And
if not, v0 will grow increasingly obsolete as servers support v2, so the
utility of this test will decrease over time anyway.
Note that we can still check stderr to make sure upload-pack bailed for
the reason we expected. It writes a similar message to stderr, and
because the server side is just another process connected by pipes,
we'll reliably see it. This would not be the case for git://, or for
ssh servers that do not relay stderr (e.g., GitHub's custom endpoint
does not).
Helped-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Dinwoodie [Wed, 23 Dec 2020 11:44:31 +0000 (11:44 +0000)]
t4129: fix setfacl-related permissions failure
When running this test in Cygwin, it's necessary to remove the inherited
access control lists from the Git working directory in order for later
permissions tests to work as expected.
As such, fix an error in the test script so that the ACLs are set for
the working directory, not a nonexistent subdirectory.
Signed-off-by: Adam Dinwoodie <adam@dinwoodie.org> Reviewed-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SZEDER Gábor [Sat, 9 Jan 2021 17:05:13 +0000 (18:05 +0100)]
t7800-difftool: don't accidentally match tmp dirs
In a bunch of test cases in 't7800-difftool.sh' we 'grep' for specific
filenames in 'git difftool's output, and those test cases are prone to
occasional failures because those filenames might be part of the name
of difftool's temporary directory as well, e.g.:
+git difftool --dir-diff --no-symlinks --extcmd ls v1
+grep sub output
+test_line_count = 2 sub-output
test_line_count: line count for sub-output != 2
/tmp/git-difftool.Ssubfq/left/:
sub
/tmp/git-difftool.Ssubfq/right/:
sub
error: last command exited with $?=1
not ok 50 - difftool --dir-diff v1 from subdirectory --no-symlinks
Fix this by tightening the 'grep' patterns looking for those
interesting filenames to match only lines where a filename stands on
its own.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Vasyl Vavrychuk [Fri, 8 Jan 2021 04:17:17 +0000 (20:17 -0800)]
git-send-email.txt: mention less secure app access with Gmail
Google may have changed Gmail security and now less secure app access
needs to be explicitly enabled if two-factor authentication is not in
place, otherwise send-email fails with:
5.7.8 Username and Password not accepted. Learn more at
5.7.8 https://support.google.com/mail/?p=BadCredentials
Document steps required to make this work.
Signed-off-by: Vasyl Vavrychuk <vvavrychuk@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
[dl: Clean up commit message and incorporate suggestions into patch.] Signed-off-by: Denton Liu <liu.denton@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Fri, 8 Jan 2021 02:30:46 +0000 (02:30 +0000)]
for-each-repo: do nothing on empty config
'git for-each-repo --config=X' should return success without calling any
subcommands when the config key 'X' has no value. The current
implementation instead segfaults.
A user could run into this issue if they used 'git maintenance start' to
initialize their cron schedule using 'git for-each-repo
--config=maintenance.repo ...' but then using 'git maintenance
unregister' to remove the config option. (Note: 'git maintenance stop'
would remove the config _and_ remove the cron schedule.)
Add a simple test to ensure this works. Use 'git help --no-such-option'
as the potential subcommand to ensure that we will hit a failure if the
subcommand is ever run.
Reported-by: Andreas Bühmann <dev@uuml.de> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Jan 2021 23:38:09 +0000 (15:38 -0800)]
SubmittingPatches: tighten wording on "sign-off" procedure
The text says "if you can certify DCO then you add a Signed-off-by
trailer". But it does not say anything about people who cannot or
do not want to certify. A natural reading may be that if you do not
certify, you must not add the trailer, but it shouldn't hurt to be
overly explicit.
branch: show "HEAD detached" first under reverse sort
Change the output of the likes of "git branch -l --sort=-objectsize"
to show the "(HEAD detached at <hash>)" message at the start of the
output. Before the compare_detached_head() function added in a
preceding commit we'd emit this output as an emergent effect.
It doesn't make any sense to consider the objectsize, type or other
non-attribute of the "(HEAD detached at <hash>)" message for the
purposes of sorting. Let's always emit it at the top instead. The only
reason it was sorted in the first place is because we're injecting it
into the ref-filter machinery so builtin/branch.c doesn't need to do
its own "am I detached?" detection.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref-filter sorting of detached HEAD to check the
FILTER_REFS_DETACHED_HEAD flag, instead of relying on the ref
description filled-in by get_head_description() to start with "(",
which in turn we expect to ASCII-sort before any other reference.
For context, we'd like the detached line to appear first at the start
of "git branch -l", e.g.:
$ git branch -l
* (HEAD detached at <hash>)
master
This doesn't change that, but improves on a fix made in 28438e84e04 (ref-filter: sort detached HEAD lines firstly, 2019-06-18)
and gives the Chinese translation the ability to use its preferred
punctuation marks again.
In Chinese the fullwidth versions of punctuation like "()" are
typically written as (U+FF08 fullwidth left parenthesis), (U+FF09
fullwidth right parenthesis) instead[1]. This form is used in both
po/zh_{CN,TW}.po in most cases where "()" is translated in a string.
Aside from that improvement to the Chinese translation, it also just
makes for cleaner code that we mark any special cases in the ref_array
we're sorting with flags and make the sort function aware of them,
instead of piggy-backing on the general-case of strcmp() doing the
right thing.
As seen in the amended tests this made reverse sorting a bit more
consistent. Before this we'd sometimes sort this message in the
middle, now it's consistently at the beginning or end, depending on
whether we're doing a normal or reverse sort. Having it at the end
doesn't make much sense either, but at least it behaves consistently
now. A follow-up commit will make this behavior under reverse sorting
even better.
I'm removing the "TRANSLATORS" comments that were in the old code
while I'm at it. Those were added in d4919bb288e (ref-filter: move
get_head_description() from branch.c, 2017-01-10). I think it's
obvious from context, string and translation memory in typical
translation tools that these are the same or similar string.
Change the reverse/ignore_case/version sort flags in the ref_sorting
struct into a bitfield. Having three of them was already a bit
unwieldy, but it would be even more so if another flag needed a
function like ref_sorting_icase_all() introduced in 76f9e569adb (ref-filter: apply --ignore-case to all sorting keys,
2020-05-03).
A follow-up change will introduce such a flag, so let's move this over
to a bitfield. Instead of using the usual '#define' pattern I'm using
the "enum" pattern from builtin/rebase.c's b4c8eb024af (builtin
rebase: support --quiet, 2018-09-04).
Perhaps there's a more idiomatic way of doing the "for each in list
amend mask" pattern than this "mask/on" variable combo. This function
doesn't allow us to e.g. do any arbitrary changes to the bitfield for
multiple flags, but I think in this case that's fine. The common case
is that we're calling this with a list of one.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: move "cmp_fn" assignment into "else if" arm
Further amend code changed in 7c5045fc180 (ref-filter: apply fallback
refname sort only after all user sorts, 2020-05-03) to move an
assignment only used in the "else if" arm to happen there. Before that
commit the cmp_fn would be used outside of it.
We could also just skip the "cmp_fn" assignment and use
strcasecmp/strcmp directly in a ternary statement here, but this is
probably more readable.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Per the CodingGuidelines add braces to an if/else if/else chain where
only the "else" had braces. This is in preparation for a subsequent
change where the "else if" will have lines added to it.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Jan 2021 09:44:17 +0000 (04:44 -0500)]
fsck: reject .gitmodules git:// urls with newlines
The previous commit taught the clone/fetch client side to reject a
git:// URL with a newline in it. Let's also catch these when fscking a
.gitmodules file, which will give an earlier warning.
Note that it would be simpler to just complain about newline in _any_
URL, but an earlier tightening for http/ftp made sure we kept allowing
newlines for unknown protocols (and this is covered in the tests). So
we'll stick to that precedent.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 7 Jan 2021 09:43:58 +0000 (04:43 -0500)]
git_connect_git(): forbid newlines in host and path
When we connect to a git:// server, we send an initial request that
looks something like:
002dgit-upload-pack repo.git\0host=example.com
If the repo path contains a newline, then it's included literally, and
we get:
002egit-upload-pack repo
.git\0host=example.com
This works fine if you really do have a newline in your repository name;
the server side uses the pktline framing to parse the string, not
newlines. However, there are many _other_ protocols in the wild that do
parse on newlines, such as HTTP. So a carefully constructed git:// URL
can actually turn into a valid HTTP request. For example:
0050git-upload-pack /
GET / HTTP/1.1
Host:localhost
host=localhost:1234
on the wire. Again, this isn't a problem for a real Git server, but it
does mean that feeding a malicious URL to Git (e.g., through a
submodule) can cause it to make unexpected cross-protocol requests.
Since repository names with newlines are presumably quite rare (and
indeed, we already disallow them in git-over-http), let's just disallow
them over this protocol.
Hostnames could likewise inject a newline, but this is unlikely a
problem in practice; we'd try resolving the hostname with a newline in
it, which wouldn't work. Still, it doesn't hurt to err on the side of
caution there, since we would not expect them to work in the first
place.
The ssh and local code paths are unaffected by this patch. In both cases
we're trying to run upload-pack via a shell, and will quote the newline
so that it makes it intact. An attacker can point an ssh url at an
arbitrary port, of course, but unless there's an actual ssh server
there, we'd never get as far as sending our shell command anyway. We
_could_ similarly restrict newlines in those protocols out of caution,
but there seems little benefit to doing so.
The new test here is run alongside the git-daemon tests, which cover the
same protocol, but it shouldn't actually contact the daemon at all. In
theory we could make the test more robust by setting up an actual
repository with a newline in it (so that our clone would succeed if our
new check didn't kick in). But a repo directory with newline in it is
likely not portable across all filesystems. Likewise, we could check
git-daemon's log that it was not contacted at all, but we do not
currently record the log (and anyway, it would make the test racy with
the daemon's log write). We'll just check the client-side stderr to make
sure we hit the expected code path.
Reported-by: Harold Kim <h.kim@flatt.tech> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Jan 2021 07:33:44 +0000 (23:33 -0800)]
Merge branch 'en/merge-ort-recursive'
The ORT merge strategy learned to synthesize virtual ancestor tree
by recursively merging multiple merge bases together, just like the
recursive backend has done for years.
* en/merge-ort-recursive:
merge-ort: implement merge_incore_recursive()
merge-ort: make clear_internal_opts() aware of partial clearing
merge-ort: copy a few small helper functions from merge-recursive.c
commit: move reverse_commit_list() from merge-recursive
Junio C Hamano [Thu, 7 Jan 2021 07:33:44 +0000 (23:33 -0800)]
Merge branch 'fc/pull-merge-rebase'
When a user does not tell "git pull" to use rebase or merge, the
command gives a loud message telling a user to choose between
rebase or merge but creates a merge anyway, forcing users who would
want to rebase to redo the operation. Fix an early part of this
problem by tightening the condition to give the message---there is
no reason to stop or force the user to choose between rebase or
merge if the history fast-forwards.
* fc/pull-merge-rebase:
pull: display default warning only when non-ff
pull: correct condition to trigger non-ff advice
pull: get rid of unnecessary global variable
pull: give the advice for choosing rebase/merge much later
pull: refactor fast-forward check
Junio C Hamano [Thu, 7 Jan 2021 07:33:44 +0000 (23:33 -0800)]
Merge branch 'en/merge-ort-2'
More "ORT" merge strategy.
* en/merge-ort-2:
merge-ort: add modify/delete handling and delayed output processing
merge-ort: add die-not-implemented stub handle_content_merge() function
merge-ort: add function grouping comments
merge-ort: add a paths_to_free field to merge_options_internal
merge-ort: add a path_conflict field to merge_options_internal
merge-ort: add a clear_internal_opts helper
merge-ort: add a few includes
Junio C Hamano [Thu, 7 Jan 2021 07:33:43 +0000 (23:33 -0800)]
Merge branch 'en/merge-ort-impl'
The merge backend "done right" starts to emerge.
* en/merge-ort-impl:
merge-ort: free data structures in merge_finalize()
merge-ort: add implementation of record_conflicted_index_entries()
tree: enable cmp_cache_name_compare() to be used elsewhere
merge-ort: add implementation of checkout()
merge-ort: basic outline for merge_switch_to_result()
merge-ort: step 3 of tree writing -- handling subdirectories as we go
merge-ort: step 2 of tree writing -- function to create tree object
merge-ort: step 1 of tree writing -- record basenames, modes, and oids
merge-ort: have process_entries operate in a defined order
merge-ort: add a preliminary simple process_entries() implementation
merge-ort: avoid recursing into identical trees
merge-ort: record stage and auxiliary info for every path
merge-ort: compute a few more useful fields for collect_merge_info
merge-ort: avoid repeating fill_tree_descriptor() on the same tree
merge-ort: implement a very basic collect_merge_info()
merge-ort: add an err() function similar to one from merge-recursive
merge-ort: use histogram diff
merge-ort: port merge_start() from merge-recursive
merge-ort: add some high-level algorithm structure
merge-ort: setup basic internal data structures
Junio C Hamano [Thu, 7 Jan 2021 07:33:43 +0000 (23:33 -0800)]
Merge branch 'ab/trailers-extra-format'
The "--format=%(trailers)" mechanism gets enhanced to make it
easier to design output for machine consumption.
* ab/trailers-extra-format:
pretty format %(trailers): add a "key_value_separator"
pretty format %(trailers): add a "keyonly"
pretty-format %(trailers): fix broken standalone "valueonly"
pretty format %(trailers) doc: avoid repetition
pretty format %(trailers) test: split a long line
When the `--super-prefix` option was implmented in 74866d7579 (git: make
super-prefix option, 2016-10-07), its existence was only documented in
the manpage but not in the command's own usage string. Given that the
commit message didn't mention that this was done intentionally and given
that it's documented in the manpage, this seems like an oversight.
Add it to the usage string to fix the inconsistency.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Philippe Blain [Thu, 7 Jan 2021 01:09:05 +0000 (01:09 +0000)]
mergetool--lib: fix '--tool-help' to correctly show available tools
Commit 83bbf9b92e (mergetool--lib: improve support for vimdiff-style tool
variants, 2020-07-29) introduced a regression in the output of `git mergetool
--tool-help` and `git difftool --tool-help` [1].
In function 'show_tool_names' in git-mergetool--lib.sh, we loop over the
supported mergetools and their variants and accumulate them in the variable
'variants', separating them with a literal '\n'.
The code then uses 'echo $variants' to turn these '\n' into newlines, but this
behaviour is not portable, it just happens to work in some shells, like
dash(1)'s 'echo' builtin.
For shells in which 'echo' does not turn '\n' into newlines, the end
result is that the only tools that are shown are the existing variants
(except the last variant alphabetically), since the variants are
separated by actual newlines in '$variants' because of the several
'echo' calls in mergetools/{bc,vimdiff}::list_tool_variants.
Fix this bug by embedding an actual line feed into `variants` in
show_tool_names(). While at it, replace `sort | uniq` by `sort -u`.
To prevent future regressions, add a simple test that checks that a few
known tools are correctly shown (let's avoid counting the total number
of tools to lessen the maintenance burden when new tools are added or if
'--tool-help' learns additional logic, like hiding tools depending on
the current platform).
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com> Based-on-patch-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Matheus Tavares [Tue, 5 Jan 2021 15:47:39 +0000 (12:47 -0300)]
t4129: don't fail if setgid is set in the test directory
The last test of t4129 creates a directory and expects its setgid bit
(g+s) to be off. But this makes the test fail when the parent directory
has the bit set, as setgid's state is inherited by newly created
subdirectories.
One way to solve this problem is to allow the presence of this bit when
comparing the return of `test_modebits` with the expected value. But
then we may have the same problem in the future when other tests start
using `test_modebits` on directories (currently t4129 is the only one)
and forget about setgid. Instead, let's make the helper function more
robust with respect to the state of the setgid bit in the test directory
by removing this bit from the returning value. There should be no
problem with existing callers as no one currently expects this bit to be
on.
Note that the sticky bit (+t) and the setuid bit (u+s) are not
inherited, so we don't have to worry about those.
Reported-by: Kevin Daudt <me@ikke.info> Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Further stress the --sort callback in ref-filter.c. The implementation
uses certain short-circuiting logic, let's make sure it behaves the
same way on e.g. name & version sort. Improves a test added in aedcb7dc75e (branch.c: use 'ref-filter' APIs, 2015-09-23).
I don't think all of this output makes sense, but let's test for the
behavior as-is, we can fix bugs in it in a later commit.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
There has never been a "git branch --local", this is just a typo for
"--list". Fixes a comment added in 23e714df91c (branch: roll
show_detached HEAD into regular ref_list, 2015-09-23).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ZheNing Hu [Wed, 6 Jan 2021 14:44:03 +0000 (14:44 +0000)]
builtin/*: update usage format
According to the guidelines in parse-options.h,
we should not end in a full stop or start with
a capital letter. Fix old error and usage
messages to match this expectation.
Signed-off-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 6 Jan 2021 14:44:02 +0000 (14:44 +0000)]
parse-options: format argh like error messages
"Keep it homogeneous across the repository" is in general a
guideline that can be used to converge to a good practice, but
we can be a bit more prescriptive in this case. Just like the
messages we give die(_("...")) are formatted without the final
full stop and without the initial capitalization, most of the
argument help text are already formatted that way, and we want
to encourage that as the house style.
Noticed-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: ZheNing Hu <adlternative@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that mktag has been migrated to use the fsck machinery to check
its input, it makes sense to teach it to run in the equivalent of "git
fsck"'s default mode.
For cases where mktag is used to (re)create a tag object using data
from an existing and malformed tag object, the validation may
optionally have to be loosened. Teach the command to take the
"--[no-]strict" option to do so.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Tue, 5 Jan 2021 19:23:50 +0000 (20:23 +0100)]
read-cache: try not to peek into `struct {lock_,temp}file`
Similar to the previous commits, try to avoid peeking into the `struct
lock_file`. We also have some `struct tempfile`s -- let's avoid looking
into those as well.
Note that `do_write_index()` takes a tempfile and that when we call it,
we either have a tempfile which we can easily hand down, or we have a
lock file, from which we need to somehow obtain the internal tempfile.
So we need to leave that one instance of peeking-into. Nevertheless,
this commit leaves us not relying on exactly how the path of the
tempfile / lock file is stored internally.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Tue, 5 Jan 2021 19:23:49 +0000 (20:23 +0100)]
refs/files-backend: don't peek into `struct lock_file`
Similar to the previous commits, avoid peeking into the `struct
lock_file`. Use the lock file API instead. Note how we obtain the path
to the lock file if `fdopen_lock_file()` failed and that this is not a
problem: as documented in lockfile.h, failure to "fdopen" does not roll
back the lock file and we're free to, e.g., query it for its path.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Tue, 5 Jan 2021 19:23:48 +0000 (20:23 +0100)]
midx: don't peek into `struct lock_file`
Similar to the previous commits, avoid peeking into the `struct
lock_file`. Use the lock file API instead.
The two functions we're calling here double-check that the tempfile is
indeed "active", which is arguably overkill considering how we took the
lock on the line immediately above. More importantly, this future-proofs
us against, e.g., other code appearing between these two lines or the
lock file and/or tempfile internals changing.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Tue, 5 Jan 2021 19:23:47 +0000 (20:23 +0100)]
commit-graph: don't peek into `struct lock_file`
Similar to the previous commit, avoid peeking into the `struct
lock_file`. Use the lock file API instead.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Martin Ågren [Tue, 5 Jan 2021 19:23:46 +0000 (20:23 +0100)]
builtin/gc: don't peek into `struct lock_file`
A `struct lock_file` is pretty much just a wrapper around a tempfile.
But it's easy enough to avoid relying on this. Use the wrappers that the
lock file API provides rather than peeking at the temp file or even into
*its* internals.
Signed-off-by: Martin Ågren <martin.agren@gmail.com> Reviewed-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Taylor Blau [Mon, 4 Jan 2021 21:35:37 +0000 (16:35 -0500)]
p7519: allow running without watchman prereq
p7519 measures the performance of the fsmonitor code. To do this, it
uses the installed copy of Watchman. If Watchman isn't installed, a noop
integration script is installed in its place.
When in the latter mode, it is expected that the script should not write
a "last update token": in fact, it doesn't write anything at all since
the script is blank.
Commit 33226af42b (t/perf/fsmonitor: improve error message if typoing
hook name, 2020-10-26) made sure that running 'git update-index
--fsmonitor' did not write anything to stderr, but this is not the case
when using the empty Watchman script, since Git will complain that:
$ which watchman
watchman not found
$ cat .git/hooks/fsmonitor-empty
$ git -c core.fsmonitor=.git/hooks/fsmonitor-empty update-index --fsmonitor
warning: Empty last update token.
Prior to 33226af42b, the output wasn't checked at all, which allowed
this noop mode to work. But, 33226af42b breaks p7519 when running it
without a 'watchman(1)' on your system.
Handle this by only checking that the stderr is empty only when running
with a real watchman executable. Otherwise, assert that the error
message is the expected one when running in the noop mode.
Signed-off-by: Taylor Blau <me@ttaylorr.com> Acked-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Convert the "mktag" command to use parse-options.h instead of its own
ad-hoc argc handling. This doesn't matter much in practice since it
doesn't support any options, but removes another special-case in our
codebase, and makes it easier to add options to it in the future.
It does marginally improve the situation for programs that want to
execute git commands in a consistent manner and e.g. always use
--end-of-options. E.g. "gitaly" does that, and has a blacklist of
built-ins that don't support --end-of-options. This is one less
special case for it and other similar programs to support.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mktag: allow omitting the header/body \n separator
Change mktag's acceptance rules to accept an empty body without an
empty line after the header again. This fixes an ancient unintended
dregression in "mktag".
When "mktag" was introduced in ec4465adb3 (Add "tag" objects that can
be used to sign other objects., 2005-04-25) the input checks were much
looser. When it was documented it 6cfec03680 (mktag: minimally update
the description., 2007-06-10) it was clearly intended for this \n to
be optional:
The message, when [it] exists, is separated by a blank line from
the header.
But then in e0aaf781f6 (mktag.c: improve verification of tagger field
and tests, 2008-03-27) this was made an error, seemingly by
accident. It was just a result of the general header checks, and all
the tests after that patch have a trailing empty line (but did not
before).
Let's allow this again, and tweak the test semantics changed in e0aaf781f6 to remove the redundant empty line. New tests added in
previous commits of mine already added an explicit test for allowing
the empty line between header and body.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In earlier commits mktag learned to use the fsck machinery, at which
point we needed to add fsck.extraHeaderEntry so it could be as strict
about extra headers as it's been ever since it was implemented.
But it's not nice to need to switch away from "mktag" to "hash-object"
+ manual "fsck" just because you'd like to have an extra header. So
let's support turning it off by getting "fsck.*" variables from the
config.
Pedantically speaking it's still not possible to make "mktag" behave
just like "hash-object -t tag" does, since we're unconditionally going
to check the referenced object in verify_object_in_tag(), which is our
own check, and not one that exists in fsck.c.
But the spirit of "this works like fsck" is preserved, in that if you
created such a tag with "hash-object" and did a full "fsck" on the
repository it would also error out about that invalid object, it just
wouldn't emit the same message as fsck does.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
