Elijah Newren [Mon, 26 Oct 2020 17:01:37 +0000 (17:01 +0000)]
merge tests: expect improved directory/file conflict handling in ort
merge-recursive.c is built on the idea of running unpack_trees() and
then "doing minor touch-ups" to get the result. Unfortunately,
unpack_trees() was run in an update-as-it-goes mode, leading
merge-recursive.c to follow suit and end up with an immediate evaluation
and fix-it-up-as-you-go design. Some things like directory/file
conflicts are not well representable in the index data structure, and
required special extra code to handle. But then when it was discovered
that rename/delete conflicts could also be involved in directory/file
conflicts, the special directory/file conflict handling code had to be
copied to the rename/delete codepath. ...and then it had to be copied
for modify/delete, and for rename/rename(1to2) conflicts, ...and yet it
still missed some. Further, when it was discovered that there were also
file/submodule conflicts and submodule/directory conflicts, we needed to
copy the special submodule handling code to all the special cases
throughout the codebase.
And then it was discovered that our handling of directory/file conflicts
was suboptimal because it would create untracked files to store the
contents of the conflicting file, which would not be cleaned up if
someone were to run a 'git merge --abort' or 'git rebase --abort'. It
was also difficult or scary to try to add or remove the index entries
corresponding to these files given the directory/file conflict in the
index. But changing merge-recursive.c to handle these correctly was a
royal pain because there were so many sites in the code with similar but
not identical code for handling directory/file/submodule conflicts that
would all need to be updated.
I have worked hard to push all directory/file/submodule conflict
handling in merge-ort through a single codepath, and avoid creating
untracked files for storing tracked content (it does record things at
alternate paths, but makes sure they have higher-order stages in the
index).
Since updating merge-recursive is too much work and we don't want to
destabilize it, instead update the testsuite to have different
expectations for relevant directory/file/submodule conflict tests.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Mon, 26 Oct 2020 17:01:36 +0000 (17:01 +0000)]
t/: new helper for tests that pass with ort but fail with recursive
There are a number of tests that the "recursive" backend does not handle
correctly but which the redesign in "ort" will. Add a new helper in
lib-merge.sh for selecting a different test expectation based on the
setting of GIT_TEST_MERGE_ALGORITHM, and use it in various testcases to
document which ones we expect to fail under recursive but pass under
ort.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 23 Oct 2020 07:26:30 +0000 (03:26 -0400)]
am, sequencer: stop parsing our own committer ident
For the --committer-date-is-author-date option of git-am and git-rebase,
we format the committer ident, then re-parse it to find the name and
email, and then feed those back to fmt_ident().
We can simplify this by handling it all at the time of the fmt_ident()
call. We pass in the appropriate getenv() results, and if they're not
present, then our WANT_COMMITTER_IDENT flag tells fmt_ident() to fill in
the appropriate value from the config. Which is exactly what
git_committer_ident() was doing under the hood.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: prepare aligned mentions of the default branch name
In some tests, the default branch name is part of aligned output. As we
want to change the default branch name to `main`, which is two
characters shorter than the old default branch name, we will have to
adjust those tests.
Since we use the original default branch name until the entire test
suite has been adjusted accordingly, the touched test cases need to be
guarded by a prereq (that is so far disabled so that they are skipped
for now).
The test cases that depend on those test cases that are newly guarded by
that prereq naturally have to be guarded, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t3200: prepare for `main` being shorter than `master`
In the test case adjusted by this patch, we want to cut just after the
longest shown ref name. Since `main` is shorter than `master`, we need
to decrease the number of characters. Since `topic` is shown, too, and
since that is only one character shorter than `master`, we decrement the
length by one instead of two.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5703: adjust a test case for the upcoming default branch name
We want to rename the default branch name used by `git init` in the near
future, using `main` as the new name.
In preparation for that, we adjust a test case that wants to rename the
default branch to a different name that however has the same length. We
use `none` as that name because it matches the length of `main`.
As this test case cannot possibly pass until the default branch name is
_actually_ changed, we temporarily guard it behind a special-purpose
prereq, until the test suite is fully converted to use that new default
branch name.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6200: adjust suppression pattern to also match "main"
In preparation to running t6200 with the default branch name set to
"main", let's adjust the only non-trivial aspect thereof. The rest will
be done via a trivial `sed` invocation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
tests: start moving to a different default main branch name
To allow for an incremental conversion to a new default main branch
name, let's introduce `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME`. This
environment variable can be set at the top of each converted test
script, overriding the default main branch name to use when initializing
new repositories (or cloning empty repositories).
Note: the `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME` is _not_ intended to be
used manually; many tests require a specific main branch name and cannot
simply work with another one. This `GIT_TEST_*` variable is meant purely
for the transitional period while the entire test suite is converted to
use `main` as the initial branch name by default.
We also introduce the `PREPARE_FOR_MAIN_BRANCH` prereq that determines
whether the default main branch name is `main`, and adjust a couple of
test functions to use it. This prereq will be used to temporarily
disable a couple test cases to allow for adjusting the test script
incrementally. Once an entire test is adjusted, we will adjust the test
so that it is run with `GIT_TEST_DEFAULT_MAIN_BRANCH_NAME=main`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t9801: use `--` in preparation for default branch rename
Seeing as we want to use `main` as the new default branch name used by
`git init`, and that `main` is used as directory name in t9801, let's
tighten the rev-list arguments to make it explicit when we are referring
to a ref instead of a directory.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
fmt-merge-msg: also suppress "into main" by default
In preparation for changing the default branch name to `main`, let's
skip the suffix "into main" in merge commit messages, the same way that
"into master" has been skipped by default.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 23 Oct 2020 07:10:15 +0000 (03:10 -0400)]
rebase: fix broken email with --committer-date-is-author-date
Commit 7573cec52c (rebase -i: support --committer-date-is-author-date,
2020-08-17) copied the committer ident-parsing code from builtin/am.c.
And in doing so, it copied a bug in which we always set the email to an
empty string. We fixed the version in git-am in the previous commit;
this commit fixes the copied code.
Reported-by: VenomVendor <info@venomvendor.com> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 23 Oct 2020 07:09:39 +0000 (03:09 -0400)]
am: fix broken email with --committer-date-is-author-date
Commit e8cbe2118a (am: stop exporting GIT_COMMITTER_DATE, 2020-08-17)
rewrote the code for setting the committer date to use fmt_ident(),
rather than setting an environment variable and letting commit_tree()
handle it. But it introduced two bugs:
- we use the author email string instead of the committer email
- when parsing the committer ident, we used the wrong variable to
compute the length of the email, resulting in it always being a
zero-length string
This commit fixes both, which causes our test of this option via the
rebase "apply" backend to now succeed.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 23 Oct 2020 07:08:43 +0000 (03:08 -0400)]
t3436: check --committer-date-is-author-date result more carefully
After running "rebase --committer-date-is-author-date", we confirm that
the committer date is the same as the author date. However, we don't
look at any other parts of the committer ident line to make sure we
didn't screw them up. And indeed, there are a few bugs here. Depending
on the rebase backend in use, we may accidentally use the author email
instead of the committer's, or even an empty string.
Let's teach our test_ctime_is_atime helper to check the committer name
and email, which reveals several failing tests.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Victor Engmark [Wed, 21 Oct 2020 23:45:08 +0000 (12:45 +1300)]
userdiff: support Bash
Support POSIX, bashism and mixed function declarations, all four
compound command types, trailing comments and mixed whitespace.
Even though Bash allows locale-dependent characters in function names
<https://unix.stackexchange.com/a/245336/3645>, only detect function
names with characters allowed by POSIX.1-2017
<https://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap03.html#tag_03_235>
for simplicity. This should cover the vast majority of use cases, and
produces system-agnostic results.
Since a word pattern has to be specified, but there is no easy way to
know the default word pattern, use the default `IFS` characters for a
starter. A later patch can improve this.
Signed-off-by: Victor Engmark <victor@engmark.name> Acked-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 22 Oct 2020 03:24:00 +0000 (23:24 -0400)]
perl: check for perl warnings while running tests
We set "use warnings" in most of our perl code to catch problems. But as
the name implies, warnings just emit a message to stderr and don't
otherwise affect the program. So our tests are quite likely to miss that
warnings are being spewed, as most of them do not look at stderr.
We could ask perl to make all warnings fatal, but this is likely
annoying for non-developers, who would rather have a running program
with a warning than something that refuses to work at all.
So instead, let's teach the perl code to respect an environment variable
(GIT_PERL_FATAL_WARNINGS) to increase the severity of the warnings. This
can be set for day-to-day running if people want to be really pedantic,
but the primary use is to trigger it within the test suite.
We could also trigger that for every test run, but likewise even the
tests failing may be annoying to distro builders, etc (just as -Werror
would be for compiling C code). So we'll tie it to a special test-mode
variable (GIT_TEST_PERL_FATAL_WARNINGS) that can be set in the
environment or as a Makefile knob, and we'll automatically turn the knob
when DEVELOPER=1 is set. That should give developers and CI the more
careful view without disrupting normal users or packagers.
Note that the mapping from the GIT_TEST_* form to the GIT_* form in
test-lib.sh is necessary even if they had the same name: the perl
scripts need it to be normalized to a perl truth value, and we also have
to make sure it's exported (we might have gotten it from the
environment, but we might also have gotten it from GIT-BUILD-OPTIONS
directly).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Wed, 21 Oct 2020 22:03:53 +0000 (15:03 -0700)]
sequencer: tolerate abbreviated stopped-sha file
In 0512eabd91 ("sequencer: stop abbreviating stopped-sha file",
2020-09-25), Git was taught both to write full object names to the
stopped-sha file and to require full object names when reading. However,
a user would experience a problem if they started an interactive rebase
using an old version of Git and then continued with a current version of
Git (for example, if the system version of Git was updated in the
meantime).
Teach Git to allow object names of any length when reading.
Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Thu, 22 Oct 2020 01:18:11 +0000 (01:18 +0000)]
svn: use correct variable name for short OID
The commit 9ab33150a0 ("perl: create and switch variables for hash
constants", 2020-06-22) converted each instance of the variable
$sha1_short into $oid_short in the Subversion code, since git-svn now
understands SHA-256. However, one conversion was missed.
As a result, Perl complains about the use of this variable:
Use of uninitialized value $sha1_short in regexp compilation at
/usr/lib64/perl5/vendor_perl/5.30.3/Git/SVN/Log.pm line 301, <$fh>
line 6.
Because we're parsing raw diff output here, the likelihood is very low
that we'll actually misparse the data, since the only lines we're going
to get starting with colons are the ones we're expecting. Even if we
had a newline in a path, we'd end up with a quoted path. Our regex is
just less strict than we'd like it to be.
However, it's obviously undesirable that our code is emitting Perl
warnings, so let's convert it to use the proper variable name.
Reported-by: Nikos Chantziaras <realnc@gmail.com> Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP_DASHED_BUILT_INS: do not skip the bin/ programs
The idea of the `SKIP_DASHED_BUILT_INS` option is to stop hard-linking
the built-in commands as separate executables. The patches to do that
specifically excluded the three commands `receive-pack`,
`upload-archive` and `upload-pack`, though: these commands are expected
to be present in the `PATH` in their dashed form on the server side of
any fetch/push.
However, due to an oversight by myself, even if those commands were
still hard-linked, they were not installed into `bin/`.
Noticed-by: Michael Forney <mforney@mforney.org> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 2b6ad0f4bc ("rebase --rebase-merges: add support for octopus
merges", 2017-12-21) introduced a case where rollback_lock_file() was
unconditionally called twice in a row with no intervening commands.
Remove the duplicate.
Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Joey Salazar [Tue, 20 Oct 2020 19:53:52 +0000 (19:53 +0000)]
t7006: Use test_path_is_* functions in test script
Modernize the test by replacing `test -e` instances with
`test_path_is_file` helper functions, and `! test -e` with
`test_path_is_missing`, for better readability and diagnostic messages.
Signed-off-by: Joey Salazar <jgsal@protonmail.com> Reviewed-by: Phillip Wood <phillip.wood123@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jonathan Tan [Tue, 20 Oct 2020 22:04:52 +0000 (15:04 -0700)]
apply: when -R, also reverse list of sections
A patch changing a symlink into a file is written with 2 sections (in
the code, represented as "struct patch"): firstly, the deletion of the
symlink, and secondly, the creation of the file. When applying that
patch with -R, the sections are reversed, so we get:
(1) creation of a symlink, then
(2) deletion of a file.
This causes an issue when the "deletion of a file" section is checked,
because Git observes that the so-called file is not a file but a
symlink, resulting in a "wrong type" error message.
What we want is:
(1) deletion of a file, then
(2) creation of a symlink.
In the code, this is reflected in the behavior of previous_patch() when
invoked from check_preimage() when the deletion is checked. Creation
then deletion means that when the deletion is checked, previous_patch()
returns the creation section, triggering a mode conflict resulting in
the "wrong type" error message. But deletion then creation means that
when the deletion is checked, previous_patch() returns NULL, so the
deletion mode is checked against lstat, which is what we want.
There are also other ways a patch can contain 2 sections referencing the
same file, for example, in 7a07841c0b ("git-apply: handle a patch that
touches the same path more than once better", 2008-06-27). "git apply
-R" fails in the same way, and this commit makes this case succeed.
Therefore, when building the list of sections, build them in reverse
order (by adding to the front of the list instead of the back) when -R
is passed.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jonathan Tan <jonathantanmy@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
sideband: report unhandled incomplete sideband messages as bugs
It was pretty tricky to verify that incomplete sideband messages are
handled correctly by the `recv_sideband()`/`demultiplex_sideband()`
code: they have to be flushed out at the end of the loop in
`recv_sideband()`, but the actual flushing is done by the
`demultiplex_sideband()` function (which therefore has to know somehow
that the loop will be done after it returns).
To catch future bugs where incomplete sideband messages might not be
shown by mistake, let's catch that condition and report a bug.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 2b695ecd74d (t5500: count objects through stderr, not trace,
2020-05-06) we tried to ensure that the "Total 3" message could be
grepped in Git's output, even if it sometimes got chopped up into
multiple lines in the trace machinery.
However, the first instance where this mattered now goes through the
sideband machinery, where it is _still_ possible for messages to get
chopped up: it *is* possible for the standard error stream to be sent
byte-for-byte and hence it can be easily interrupted. Meaning: it is
possible for the single line that we're looking for to be chopped up
into multiple sideband packets, with a primary packet being delivered
between them.
This seems to happen occasionally in the `vs-test` part of our CI
builds, i.e. with binaries built using Visual C, but not when building
with GCC or clang; The symptom is that t5500.43 fails to find a line
matching `remote: Total 3` in the `log` file, which ends in something
along these lines:
remote: Tota
remote: l 3 (delta 0), reused 0 (delta 0), pack-reused 0
This should not happen, though: we have code in `demultiplex_sideband()`
_specifically_ to stitch back together lines that were delivered in
separate sideband packets.
However, this stitching was broken in a subtle way in fbd76cd450
(sideband: reverse its dependency on pkt-line, 2019-01-16): before that
change, incomplete sideband lines would not be flushed upon receiving a
primary packet, but after that patch, they would be.
The subtleness of this bug comes from the fact that it is easy to get
confused by the ambiguous meaning of the `break` keyword: after writing
the primary packet contents, the `break;` in the original version of
`recv_sideband()` does _not_ break out of the `while` loop, but instead
only ends the `switch` case:
while (!retval) {
[...]
switch (band) {
[...]
case 1:
/* Write the contents of the primary packet */
write_or_die(out, buf + 1, len);
/* Here, we do *not* break out of the loop, `retval` is unchanged */
break;
[...]
}
if (outbuf.len) {
/* Write any remaining sideband messages lacking a trailing LF */
strbuf_addch(&outbuf, '\n');
xwrite(2, outbuf.buf, outbuf.len);
}
In contrast, after fbd76cd450 (sideband: reverse its dependency on
pkt-line, 2019-01-16), the body of the `while` loop was extracted into
`demultiplex_sideband()`, crucially _including_ the logic to write
incomplete sideband messages:
switch (band) {
[...]
case 1:
*sideband_type = SIDEBAND_PRIMARY;
/* This does not break out of the loop: the loop is in the caller */
break;
[...]
}
cleanup:
[...]
/* This logic is now no longer _outside_ the loop but _inside_ */
if (scratch->len) {
strbuf_addch(scratch, '\n');
xwrite(2, scratch->buf, scratch->len);
}
The correct way to fix this is to return from `demultiplex_sideband()`
early. The caller will then write out the contents of the primary packet
and continue looping. The `scratch` buffer for incomplete sideband
messages is owned by that caller, and will continue to accumulate the
remainder(s) of those messages. The loop will only end once
`demultiplex_sideband()` returned non-zero _and_ did not indicate a
primary packet, which is the case only when we hit the `cleanup:` path,
in which we take care of flushing any unfinished sideband messages and
release the `scratch` buffer.
To ensure that this does not get broken again, we introduce a pair of
subcommands of the `pkt-line` test helper that specifically chop up the
sideband message and squeeze a primary packet into the middle.
Final note: The other test case touched by 2b695ecd74d (t5500: count
objects through stderr, not trace, 2020-05-06) is not affected by this
issue because the sideband machinery is not involved there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michał Kępień [Tue, 20 Oct 2020 06:48:09 +0000 (08:48 +0200)]
diff: add -I<regex> that ignores matching changes
Add a new diff option that enables ignoring changes whose all lines
(changed, removed, and added) match a given regular expression. This is
similar to the -I/--ignore-matching-lines option in standalone diff
utilities and can be used e.g. to ignore changes which only affect code
comments or to look for unrelated changes in commits containing a large
number of automatically applied modifications (e.g. a tree-wide string
replacement). The difference between -G/-S and the new -I option is
that the latter filters output on a per-change basis.
Use the 'ignore' field of xdchange_t for marking a change as ignored or
not. Since the same field is used by --ignore-blank-lines, identical
hunk emitting rules apply for --ignore-blank-lines and -I. These two
options can also be used together in the same git invocation (they are
complementary to each other).
Rename xdl_mark_ignorable() to xdl_mark_ignorable_lines(), to indicate
that it is logically a "sibling" of xdl_mark_ignorable_regex() rather
than its "parent".
Signed-off-by: Michał Kępień <michal@isc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Michał Kępień [Tue, 20 Oct 2020 06:48:08 +0000 (08:48 +0200)]
merge-base, xdiff: zero out xpparam_t structures
xpparam_t structures are usually zero-initialized before their specific
fields are assigned to, but there are three locations in the tree where
that does not happen. Add the missing memset() calls in order to make
initialization of xpparam_t structures consistent tree-wide and to
prevent stack garbage from being used as field values.
Signed-off-by: Michał Kępień <michal@isc.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
I also added a benchmark for a tiny git diff workload w/ a pathspec.
I see an approximately .02 second overhead added w/ and w/o fsmonitor
From looking at these results, I suspected that refresh_fsmonitor
is already happening during git diff - independent of this patch
series' optimization. Confirmed that suspicion by breaking on
refresh_fsmonitor.
(gdb) bt [simplified]
0 refresh_fsmonitor at fsmonitor.c:176
1 ie_match_stat at read-cache.c:375
2 match_stat_with_submodule at diff-lib.c:237
4 builtin_diff_files at builtin/diff.c:260
5 cmd_diff at builtin/diff.c:541
6 run_builtin at git.c:450
7 handle_builtin at git.c:700
8 run_argv at git.c:767
9 cmd_main at git.c:898
10 main at common-main.c:52
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Nipunn Koorapati [Tue, 20 Oct 2020 13:41:00 +0000 (13:41 +0000)]
t/perf/p7519-fsmonitor.sh: warm cache on first git status
The first git status would be inflated due to warming of
filesystem cache. This makes the results comparable.
Before
Test this tree
--------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 2.52(1.59+1.56)
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.18(0.12+0.06)
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.36(0.73+0.62)
7519.7: status (fsmonitor=) 0.69(0.52+0.90)
7519.8: status -uno (fsmonitor=) 0.37(0.28+0.81)
7519.9: status -uall (fsmonitor=) 1.53(0.93+1.32)
After
Test this tree
--------------------------------------------------------------------------------
7519.2: status (fsmonitor=.git/hooks/fsmonitor-watchman) 0.39(0.33+0.06)
7519.3: status -uno (fsmonitor=.git/hooks/fsmonitor-watchman) 0.17(0.13+0.05)
7519.4: status -uall (fsmonitor=.git/hooks/fsmonitor-watchman) 1.34(0.77+0.56)
7519.7: status (fsmonitor=) 0.70(0.53+0.90)
7519.8: status -uno (fsmonitor=) 0.37(0.32+0.78)
7519.9: status -uall (fsmonitor=) 1.55(1.01+1.25)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Vandiver [Tue, 20 Oct 2020 13:40:58 +0000 (13:40 +0000)]
fsmonitor: use fsmonitor data in `git diff`
With fsmonitor enabled, the first call to match_stat_with_submodule
calls refresh_fsmonitor, incurring the overhead of reading the list of
updated files -- but run_diff_files does not respect the
CE_FSMONITOR_VALID flag.
Make use of the fsmonitor extension to skip lstat() calls on files
that fsmonitor judged as unmodified.
Notably, this change improves performance of the git shell prompt when
GIT_PS1_SHOWDIRTYSTATE is set.
Signed-off-by: Alex Vandiver <alexmv@dropbox.com> Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Christian Couder [Tue, 20 Oct 2020 08:33:43 +0000 (10:33 +0200)]
filter-branch doc: fix filter-repo typo
The name of the tool is 'git-filter-repo' not
'git-repo-filter'.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Reviewed-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 16 Oct 2020 20:51:04 +0000 (13:51 -0700)]
Revert "test_cmp: diagnose incorrect arguments"
This reverts commit d572f52a64c6a69990f72ad6a09504b9b615d2e4; the
idea to detect that "test_cmp expect actual" was fed a misspelt
filename meant well, but when the version of Git tested exhibits a
bug, the reason why these two files do not match may be because one
of them did not get created as expected, in which case missing file
is not a sign of misspelt filename but is a genuine test failure.
Acked-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bradley M. Kuhn [Tue, 20 Oct 2020 01:03:55 +0000 (18:03 -0700)]
Documentation: stylistically normalize references to Signed-off-by:
Ted reported an old typo in the git-commit.txt and merge-options.txt.
Namely, the phrase "Signed-off-by line" was used without either a
definite nor indefinite article.
Upon examination, it seems that the documentation (including items in
Documentation/, but also option help strings) have been quite
inconsistent on usage when referring to `Signed-off-by`.
First, very few places used a definite or indefinite article with the
phrase "Signed-off-by line", but that was the initial typo that led
to this investigation. So, normalize using either an indefinite or
definite article consistently.
The original phrasing, in Commit 3f971fc425b (Documentation updates,
2005-08-14), is "Add Signed-off-by line". Commit 6f855371a53 (Add
--signoff, --check, and long option-names. 2005-12-09) switched to
using "Add `Signed-off-by:` line", but didn't normalize the former
commit to match. Later commits seem to have cut and pasted from one
or the other, which is likely how the usage became so inconsistent.
Junio stated on the git mailing list in
<xmqqy2k1dfoh.fsf@gitster.c.googlers.com> a preference to leave off
the colon. Thus, prefer `Signed-off-by` (with backticks) for the
documentation files and Signed-off-by (without backticks) for option
help strings.
Additionally, Junio argued that "trailer" is now the standard term to
refer to `Signed-off-by`, saying that "becomes plenty clear that we
are not talking about any random line in the log message". As such,
prefer "trailer" over "line" anywhere the former word fits.
However, leave alone those few places in documentation that use
Signed-off-by to refer to the process (rather than the specific
trailer), or in places where mail headers are generally discussed in
comparison with Signed-off-by.
Reported-by: "Theodore Y. Ts'o" <tytso@mit.edu> Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org> Acked-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 20 Oct 2020 01:03:54 +0000 (18:03 -0700)]
SubmittingPatches: clarify DCO is our --signoff rule
The description on sign-off and DCO was written back in the days
where there was only a choice between "use sign-off and it means the
contributor agrees to the Linux-kernel style DCO" and "not using
sign-off at all will make your patch unusable". These days, we are
trying to clarify that the exact meaning of a sign-off varies
project to project.
Let's be more explicit when presenting what _our_ rules are. It is
of secondary importance that it originally came from the kernel
project, so move the description as a historical note at the end,
while cautioning that what a sign-off means to us may be different from
what it means to other projects contributors may have been used to.
Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Bradley M. Kuhn <bkuhn@sfconservancy.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bradley M. Kuhn [Tue, 20 Oct 2020 01:03:53 +0000 (18:03 -0700)]
Documentation: clarify and expand description of --signoff
Building on past documentation improvements in b2c150d3aa (Expand
documentation describing --signoff, 2016-01-05), further clarify
that any project using Git may and often does set its own policy.
However, leave intact reference to the Linux DCO, which Git also
uses. It is reasonable for Git to advocate for its own Signed-off-by
methodology in its documentation, as long as the documentation
remains respectful that YMMV and other projects may well have very
different contributor representations tied to Signed-off-by.
Signed-off-by: Bradley M. Kuhn <bkuhn@sfconservancy.org> Signed-off-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Jeff King <peff@peff.net> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Tue, 20 Oct 2020 01:03:52 +0000 (18:03 -0700)]
doc: preparatory clean-up of description on the sign-off option
Almost identical text on the signed-off-by trailer appears in the
documentation for "git commit" and "git merge" and its friends.
Introduce a new signoff-option.txt file to be shared. A couple of
things of note are:
- The short-form "-s" is available only in "git commit", but not in
commands that are friends of "git merge", as it is used as a
short-hand for "--strategy".
- The original lacks description on the negated "--no-signoff" form
on "git commit" side, but it equally is applicable. It however
was unclear in the original text that not adding a Signed-off-by
trailer is the default, so rephrase to explain it as a way to
countermand a --signoff option that appeared earlier on the same
command line.
This is in preparation to apply a further clarification on what
exactly the Signed-off-by trailer means.
Suggested-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Reviewed-by: Bradley M. Kuhn <bkuhn@sfconservancy.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 18 Oct 2020 00:23:47 +0000 (00:23 +0000)]
test-lib: reduce verbosity of skipped tests
When using the --run flag to run just two or three tests from a test
file which contains several dozen tests, having every skipped test print
out dozens of lines of output for the test code for that skipped test
(in addition to the TAP output line) adds up to hundreds or thousands of
lines of irrelevant output that make it very hard to fish out the
relevant results you were looking for. Simplify the output for skipped
tests to remove this extra output, leaving only the TAP output line
(i.e. the line reading "ok <number> # skip <test-description>", which
already mentions that the test was "skip"ped).
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 18 Oct 2020 00:23:46 +0000 (00:23 +0000)]
t6006, t6012: adjust tests to use 'setup' instead of synonyms
With the new ability to pass --run=setup to select which tests to run,
it is more convenient if tests use the term "setup" instead of synonyms
like 'prepare' or 'rebuild'. There are undoubtedly many other tests in
our testsuite that could be changed over too, these are just a couple
that I ran into.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Sun, 18 Oct 2020 00:23:45 +0000 (00:23 +0000)]
test-lib: allow selecting tests by substring/glob with --run
Many of our test scripts have several "setup" tests. It's a lot easier
to say
./t0050-filesystem.sh --run=setup,9
in order to run all the setup tests as well as test #9, than it is to
track down what all the setup tests are and enter all their numbers in
the list. Also, I often find myself wanting to run just one or a couple
tests from the test file, but I don't know the numbering of any of the
tests -- to get it I either have to first run the whole test file (or
start counting by hand or figure out some other clever but non-obvious
tricks). It's really convenient to be able to just look at the test
description(s) and then run
Elijah Newren [Fri, 16 Oct 2020 23:39:54 +0000 (23:39 +0000)]
t7518: fix flaky grep invocation
t7518.1 added in commit 862e80a413 ("ident: handle NULL email when
complaining of empty name", 2017-02-23), was trying to make sure that
the test with an empty ident did not segfault and did not result in
glibc quiety translating a NULL pointer into a name of "(null)". It did
the latter by ensuring that a grep for "null" didn't appear in the
output, but on one automatic CI run I observed the following output:
fatal: empty ident name (for <runner@fv-az128-670.gcliasfzo2nullsdbrimjtbyhg.cx.internal.cloudapp.net>) not allowed
Note that 'null' appears as a substring of the domain name, found
within 'gcliasfzo2nullsdbrimjtbyhg'. Tighten the test by searching for
"(null)" rather than "null".
Signed-off-by: Elijah Newren <newren@gmail.com> Reviewed-by: Taylor Blau <me@ttaylorr.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Samuel Čavoj [Sat, 17 Oct 2020 23:15:57 +0000 (01:15 +0200)]
t3435: add tests for rebase -r GPG signing
Add test cases of various combinations of the commit.gpgsign option and
--gpg-sign, --no-gpg-sign flags with rebase -r with the default merge
strategy. This excercises a different code-path from those with octopus
merges or overridden merge strategy with rebase -s.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Samuel Čavoj [Sat, 17 Oct 2020 23:15:56 +0000 (01:15 +0200)]
sequencer: pass explicit --no-gpg-sign to merge
The merge subcommand launched for merges with non-default strategy would
use its own default behaviour to decide how to sign commits, regardless
of what opts->gpg_sign was set to. For example the --no-gpg-sign flag
given to rebase explicitly would get ignored, if commit.gpgsign was set
to true.
Fix the issue and add a test case excercising this behaviour.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Samuel Čavoj [Sat, 17 Oct 2020 23:15:55 +0000 (01:15 +0200)]
sequencer: fix gpg option passed to merge subcommand
When performing a rebase with --rebase-merges using either a custom
strategy specified with -s or an octopus merge, and at the same time
having gpgsign enabled (either rebase -S or config commit.gpgsign), the
operation would fail on making the merge commit. Instead of "-S%s" with
the key id substituted, only the bare key id would get passed to the
underlying merge command, which tried to interpret it as a ref.
Fix the issue and add test cases as suggested by Johannes Schindelin and
Junio C Hamano.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 17 Oct 2020 20:10:58 +0000 (13:10 -0700)]
Merge https://github.com/prati0100/git-gui
* https://github.com/prati0100/git-gui:
git-gui: blame: prevent tool tips from sticking around after Command-Tab
git-gui: improve dark mode support
git-gui: fix mixed tabs and spaces; prefer tabs
Stefan Haller [Tue, 13 Oct 2020 13:26:43 +0000 (15:26 +0200)]
git-gui: blame: prevent tool tips from sticking around after Command-Tab
On Mac, tooltips are not automatically removed when a window loses
focus. Furthermore, mouse-move events are only dispatched to the active
window, which means that if we Command-tab to another application while
a tool tip is showing, the tool tip will stay there forever (in front of
other applications). So we must hide it manually when we lose focus.
Do this unconditionally here (i.e. without if {[is_MacOSX]}); it
shouldn't hurt on other platforms, even though they don't seem to have
this problem.
Signed-off-by: Stefan Haller <stefan@haller-berlin.de> Signed-off-by: Pratyush Yadav <me@yadavpratyush.com>
Emily Shaffer [Fri, 16 Oct 2020 20:52:31 +0000 (13:52 -0700)]
MyFirstContribution: clarify asciidoc dependency
Per IRC:
[19:52] <lkmandy> With respect to the MyFirstContribution tutorial, I
will like to suggest this - Under the section "Adding Documentation",
just before the "make all doc" command, it will be really helpful to
prompt a user to check if they have the asciidoc package installed, if
they don't, the command should be provided or they can just be pointed
to install it
So, let's move the note about the dependency to before the build command
blockquote.
Signed-off-by: Emily Shaffer <emilyshaffer@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thomas Koutcher [Thu, 15 Oct 2020 21:59:20 +0000 (21:59 +0000)]
credential: load default config
Make `git credential fill` honour the core.askPass variable.
Signed-off-by: Thomas Koutcher <thomas.koutcher@online.fr>
[jk: added test] Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 15 Oct 2020 20:46:30 +0000 (20:46 +0000)]
t6423: more involved rules for renaming directories into each other
Testcases 12b and 12c were both slightly weird; they were marked as
having a weird resolution, but with the note that even straightforward
simple rules can give weird results when the input is bizarre.
However, during optimization work for merge-ort, I discovered a
significant speedup that is possible if we add one more fairly
straightforward rule: we don't bother doing directory rename detection
if there are no new files added to the directory on the other side of
the history to be affected by the directory rename. This seems like an
obvious and straightforward rule, but there was one funny corner case
where directory rename detection could affect only existing files: the
funny corner case where two directories are renamed into each other on
opposite sides of history. In other words, it only results in a
different output for testcases 12b and 12c.
Since we already thought testcases 12b and 12c were weird anyway, and
because the optimization often has a significant effect on common cases
(but is entirely prevented if we can't change how 12b and 12c function),
let's add the additional rule and tweak how 12b and 12c work. Split
both testcases into two (one where we add no new files, and one where
the side that doesn't rename a given directory will add files to it),
and mark them with the new expectation.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 15 Oct 2020 20:46:29 +0000 (20:46 +0000)]
t6423: update directory rename detection tests with new rule
While investigating the issues highlighted by the testcase in the
previous patch, I also found a shortcoming in the directory rename
detection rules. Split testcase 6b into two to explain this issue
and update directory-rename-detection.txt to remove one of the previous
rules that I know believe to be detrimental. Also, update the wording
around testcase 8e; while we are not modifying the results of that
testcase, we were previously unsure of the appropriate resolution of
that test and the new rule makes the previously chosen resolution for
that testcase a bit more solid.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 15 Oct 2020 20:46:28 +0000 (20:46 +0000)]
t6423: more involved directory rename test
Add a new testcase modelled on a real world repository example that
served multiple purposes:
* it uncovered a bug in the current directory rename detection
implementation.
* it is a good test of needing to do directory rename detection for
a series of commits instead of just one (and uses rebase instead
of just merge like all the other tests in this testfile).
* it is an excellent stress test for some of the optimizations in
my new merge-ort engine
I can expand on the final item later when I have submitted more of
merge-ort, but the bug is the main immediate concern. It arises as
follows:
* dir/subdir/ has several files
* almost all files in dir/subdir/ are renamed to folder/subdir/
* one of the files in dir/subdir/ is renamed to folder/subdir/newsubdir/
* If the other side of history (that doesn't do the renames) adds a
new file to dir/subdir/, where should it be placed after the merge?
The most obvious two choices are: (1) leave the new file in dir/subdir/,
don't make it follow the rename, and (2) move the new file to
folder/subdir/, following the rename of most the files. However,
there's a possible third choice here: (3) move the new file to
folder/subdir/newsubdir/. The choice reinforce the fact that
merge.directoryRenames=conflict is a good default, but when the merge
machinery needs to stick it somewhere and notify the user of the
possibility that they might want to place it elsewhere. Surprisingly,
the current code would always choose (3), while the real world
repository was clearly expecting (2) -- move the file along with where
the herd of files was going, not with the special exception.
The problem here is that for the majority of the file renames,
dir/subdir/ -> folder/subdir/
is actually represented as
dir/ -> folder/
This directory rename would have a big weight associated with it since
most the files followed that rename. However, we always consult the
most immediate directory first, and there is only one rename rule for
it:
dir/subdir/ -> folder/subdir/newsubdir/
Since this rule is the only one for mapping from dir/subdir/, it
automatically wins and that directory rename was followed instead of the
desired dir/subdir/ -> folder/subdir/.
Unfortunately, the fix is a bit involved so for now just add the
testcase documenting the issue.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Elijah Newren [Thu, 15 Oct 2020 20:46:27 +0000 (20:46 +0000)]
directory-rename-detection.txt: update references to regression tests
The regression tests for directory rename detection were renamed from
t6043 to t6423 in commit 919df31955 ("Collect merge-related tests to
t64xx", 2020-08-10); update this file to match. Also, add a small
clarification to nearby text while we're at it.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bisect-autostart` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_autostart()` is directly called from the C implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Thu, 15 Oct 2020 13:38:37 +0000 (15:38 +0200)]
bisect--helper: retire `--write-terms` subcommand
The `--write-terms` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function `write_terms()`
is called from the C implementation of `set_terms()` and
`bisect_start()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--check-expected-revs` subcommand is no longer used from the
git-bisect.sh shell script. Functions `check_expected_revs` and
`is_expected_revs` are also deleted.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Thu, 15 Oct 2020 13:38:35 +0000 (15:38 +0200)]
bisect--helper: reimplement `bisect_state` & `bisect_head` shell functions in C
Reimplement the `bisect_state()` shell functions in C and also add a
subcommand `--bisect-state` to `git-bisect--helper` to call them from
git-bisect.sh .
Using `--bisect-state` subcommand is a temporary measure to port shell
function to C so as to use the existing test suite. As more functions
are ported, this subcommand will be retired and will be called by some
other methods.
`bisect_head()` is only called from `bisect_state()`, thus it is not
required to introduce another subcommand.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Thu, 15 Oct 2020 13:38:34 +0000 (15:38 +0200)]
bisect--helper: retire `--next-all` subcommand
The `--next-all` subcommand is no longer used from the git-bisect.sh
shell script. Instead the function `bisect_next_all()` is called from
the C implementation of `bisect_next()`.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The `--bisect-clean-state` subcommand is no longer used from the
git-bisect.sh shell script. Instead the function
`bisect_clean_state()` is directly called from the C
implementation.
Mentored-by: Lars Schneider <larsxschneider@gmail.com> Mentored-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pranit Bauva [Thu, 15 Oct 2020 13:38:32 +0000 (15:38 +0200)]
bisect--helper: finish porting `bisect_start()` to C
Add the subcommand to `git bisect--helper` and call it from
git-bisect.sh.
With the conversion of `bisect_auto_next()` from shell to C in a
previous commit, `bisect_start()` can now be fully ported to C.
So let's complete the `--bisect-start` subcommand of
`git bisect--helper` so that it fully implements `bisect_start()`,
and let's use this subcommand in `git-bisect.sh` instead of
`bisect_start()`.
Note that the `eval` in the changed line of `git-bisect.sh` cannot be
dropped: it is necessary because the `rev` and the `tail`
variables may contain multiple, quoted arguments that need to be
passed to `bisect--helper` (without the quotes, naturally).
Mentored-by: Christian Couder <chriscool@tuxfamily.org> Mentored-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Pranit Bauva <pranit.bauva@gmail.com> Signed-off-by: Tanushree Tumane <tanushreetumane@gmail.com> Signed-off-by: Miriam Rubio <mirucam@gmail.com> Reviewed-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 15 Oct 2020 19:34:11 +0000 (15:34 -0400)]
fast-import: remove duplicated option-parsing line
Commit 1bdca81641 (fast-import: add options for rewriting submodules,
2020-02-22) accidentally added two lines parsing the option
"rewrite-submodules-from". This didn't do anything in practice, because
they're in an if/else chain and so the second one can never trigger.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adam Spiers [Thu, 15 Oct 2020 22:54:46 +0000 (23:54 +0100)]
hook: add sample template for push-to-checkout
The template is a more-or-less exact translation to shell of the C
code for the default behaviour for git's push-to-checkout hook defined
in the push_to_deploy() function in builtin/receive-pack.c, to serve
as a convenient starting point for modification.
It also contains relevant text extracted from the git-config(1) and
githooks(5) man pages.
Signed-off-by: Adam Spiers <git@adamspiers.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 15 Oct 2020 19:30:29 +0000 (15:30 -0400)]
config.mak.dev: build with -fno-common
It's an easy mistake to define a variable in a header with "int x;" when
you really meant to only declare the variable as "extern int x;"
instead. Clang and gcc will both allow this when building with
"-fcommon"; they put these "tentative definitions" in a common block
which the linker is able to resolve.
This is the default in clang and was the default in gcc until gcc-10,
since it helps some legacy code. However, we would prefer not to rely on
this because:
- using "extern" makes the intent more clear (so it's a style issue,
but it's one the compiler can help us catch)
- according to the gcc manpage, it may yield a speed and code size
penalty
So let's build explicitly with -fno-common when the DEVELOPER knob is
set, which will let developers using clang and older versions of gcc
notice these problems.
I didn't bother making this conditional on a particular version of gcc.
As far as I know, this option has been available forever in both gcc and
clang, so old versions don't need to avoid it. And we already expect gcc
and clang options throughout config.mak.dev, so it's unlikely anybody
setting the DEVELOPER knob is using anything else. It's a noop on
gcc-10, of course, but it's not worth trying to exclude it there.
Note that there's nothing to fix in the code; we already don't have any
issues here. But if you want to test the patch, you can add a bare "int
x;" into cache.h, which will cause the link step to fail.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alex Vandiver [Thu, 15 Oct 2020 16:28:36 +0000 (16:28 +0000)]
dir.c: fix comments to agree with argument name
Signed-off-by: Alex Vandiver <alexmv@dropbox.com> Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 15 Oct 2020 17:22:04 +0000 (17:22 +0000)]
maintenance: add troubleshooting guide to docs
The 'git maintenance run' subcommand takes a lock on the object database
to prevent concurrent processes from competing for resources. This is an
important safety measure to prevent possible repository corruption and
data loss.
This feature can lead to confusing behavior if a user is not aware of
it. Add a TROUBLESHOOTING section to the 'git maintenance' builtin
documentation that discusses these tradeoffs. The short version of this
section is that Git will not corrupt your repository, but if the list of
scheduled tasks takes longer than an hour then some scheduled tasks may
be dropped due to this object database collision. For example, a
long-running "daily" task at midnight might prevent an "hourly" task
from running at 1AM.
The opposite is also possible, but less likely as long as the "hourly"
tasks are much faster than the "daily" and "weekly" tasks.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 15 Oct 2020 17:22:03 +0000 (17:22 +0000)]
maintenance: use 'incremental' strategy by default
The 'git maintenance (register|start)' subcommands add the current
repository to the global Git config so maintenance will operate on that
repository. It does not specify what maintenance should occur or how
often.
To make it simple for users to start background maintenance with a
recommended schedlue, update the 'maintenance.strategy' config option in
both the 'register' and 'start' subcommands. This allows users to
customize beyond the defaults using individual
'maintenance.<task>.schedule' options, but also the user can opt-out of
this strategy using 'maintenance.strategy=none'.
Helped-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Derrick Stolee [Thu, 15 Oct 2020 17:22:02 +0000 (17:22 +0000)]
maintenance: create maintenance.strategy config
To provide an on-ramp for users to use background maintenance without
several 'git config' commands, create a 'maintenance.strategy' config
option. Currently, the only important value is 'incremental' which
assigns the following schedule:
These tasks are chosen to minimize disruptions to foreground Git
commands and use few compute resources.
The 'maintenance.strategy' is intended as a baseline that can be
customzied further by manually assigning 'maintenance.<task>.enabled'
and 'maintenance.<task>.schedule' config options, which will override
any recommendation from 'maintenance.strategy'. This operates similarly
to config options like 'feature.experimental' which operate as "meta"
config options that change default config values.
This presents a way forward for updating the 'incremental' strategy in
the future or adding new strategies. For example, a potential strategy
could be to include a 'full' strategy that runs the 'gc' task weekly
and no other tasks by default.
Helped-by: Martin Ågren <martin.agren@gmail.com> Signed-off-by: Derrick Stolee <dstolee@microsoft.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 15 Oct 2020 19:30:04 +0000 (15:30 -0400)]
usage: define a type for a reporting function
The usage, die, warning, and error routines all work with a function
pointer that takes the message to be reported. We usually just mention
the function's full type inline. But this makes the use of these
pointers hard to read, especially because C's syntax for returning a
function pointer is so awful:
Unless you read it very carefully, this looks like a function pointer
declaration. Let's instead use a single typedef to define a reporting
function, which is the same for all four types.
Note that this also removes the "extern" from these declarations to
match the surrounding functions. They were missed in 554544276a (*.[ch]:
remove extern from function declarations using spatch, 2019-04-29)
presumably because of the unusual syntax.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Thu, 15 Oct 2020 15:38:49 +0000 (11:38 -0400)]
fast-import: fix over-allocation of marks storage
Fast-import stores its marks in a trie-like structure made of mark_set
structs. Each struct has a fixed size (1024). If our id number is too
large to fit in the struct, then we allocate a new struct which shifts
the id number by 10 bits. Our original struct becomes a child node
of this new layer, and the new struct becomes the top level of the trie.
This scheme was broken by ddddf8d7e2 (fast-import: permit reading
multiple marks files, 2020-02-22). Before then, we had a top-level
"marks" pointer, and the push-down worked by assigning the new top-level
struct to "marks". But after that commit, insert_mark() takes a pointer
to the mark_set, rather than using the global "marks". It continued to
assign to the global "marks" variable during the push down, which was
wrong for two reasons:
- we added a call in option_rewrite_submodules() which uses a separate
mark set; pushing down on "marks" is outright wrong here. We'd
corrupt the "marks" set, and we'd fail to correctly store any
submodule mappings with an id over 1024.
- the other callers passed "marks", but the push-down was still wrong.
In read_mark_file(), we take the pointer to the mark_set as a
parameter. So even though insert_mark() was updating the global
"marks", the local pointer we had in read_mark_file() was not
updated. As a result, we'd add a new level when needed, but then the
next call to insert_mark() wouldn't see it! It would then allocate a
new layer, which would also not be seen, and so on. Lookups for the
lost layers obviously wouldn't work, but before we even hit any
lookup stage, we'd generally run out of memory and die.
Our tests didn't notice either of these cases because they didn't have
enough marks to trigger the push-down behavior. The new tests in t9304
cover both cases (and fail without this patch).
We can solve the problem by having insert_mark() take a pointer-to-pointer
of the top-level of the set. Then our push down can assign to it in a
way that the caller actually sees. Note the subtle reordering in
option_rewrite_submodules(). Our call to read_mark_file() may modify our
top-level set pointer, so we have to wait until after it returns to
assign its value into the string_list.
Reported-by: Sergey Brester <serg.brester@sebres.de> Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existence of hashmap_free() and hashmap_free_entries() confused me,
and the docs weren't clear enough. We are dealing with a map table,
entries in that table, and possibly also things each of those entries
point to. I had to consult other source code examples and the
implementation. Add a brief note to clarify the differences. This will
become even more important once we introduce a new
hashmap_partial_clear() function which will add the question of whether
the table itself has been freed.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ci: make the "skip-if-redundant" check more defensive
In 7d78d5fc1a9 (ci: skip GitHub workflow runs for already-tested
commits/trees, 2020-10-08), we added a check that determines whether
there is already a workflow run for the given commit (or at least tree),
and if found, skips the current run.
We just worked around an issue with this check where older runs might
unexpectedly miss the `head_commit` attribute.
Let's be even more defensive by catching all kinds of exceptions,
logging them as warnings, and continue the run without skipping it
(after all, if the check fails, we _want_ to continue with the run).
This commit is best viewed with the diff option `-w` because it
increases the indentation level of the GitHub Action script by two
spaces, surrounding it by a `try ... catch` construct.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apparently older GitHub runs at least _sometimes_ lack information about
the `head_commit` (and therefore the `ci-config` check will fail with
"TypeError: Cannot read property 'tree_id' of null") in the check added
in 7d78d5fc1a9 (ci: skip GitHub workflow runs for already-tested
commits/trees, 2020-10-08).
Let's work around this by adding a defensive condition.
Reported-by: Philippe Blain <levraiphilippeblain@gmail.com> Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 11 Oct 2020 16:03:28 +0000 (18:03 +0200)]
grep: handle deref_tag() returning NULL
deref_tag() can return NULL. Exit gracefully in that case instead
of blindly dereferencing the return value.
.name shouldn't ever be NULL, but grep_object() handles that case
explicitly, so let's be defensive here as well and show the broken
object's ID if it happens to lack a name after all.
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rafael Silva [Sun, 11 Oct 2020 10:11:52 +0000 (10:11 +0000)]
worktree: teach `list` to annotate locked worktree
The "git worktree list" shows the absolute path to the working tree,
the commit that is checked out and the name of the branch. It is not
immediately obvious which of the worktrees, if any, are locked.
"git worktree remove" refuses to remove a locked worktree with
an error message. If "git worktree list" told which worktrees
are locked in its output, the user would not even attempt to
remove such a worktree, or would realize that
"git worktree remove -f -f <path>" is required.
Teach "git worktree list" to append "locked" to its output.
The output from the command becomes like so:
Helped-by: Junio C Hamano <gitster@pobox.com> Helped-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com> Reviewed-by: Eric Sunshine <sunshine@sunshineco.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
