Jeff King [Mon, 4 Aug 2025 13:00:11 +0000 (09:00 -0400)]
revert: initialize const value
When building with clang-22 and DEVELOPER=1 mode, this warning causes us
to fail compilation:
builtin/revert.c:114:13: error: default initialization of an object of type 'const char' leaves the object uninitialized [-Werror,-Wdefault-const-init-var-unsafe]
114 | const char sentinel_value;
| ^
The compiler is right that this code is a bit funny. We declare a const
value without an initializer. It cannot be assigned to because of the
const, but without an initializer it has no predictable value. So as a
variable it can never have any useful function, and if we tried to look
at it, we'd get undefined behavior.
But it does have a function. We never use its value, but rather use its
address as a sentinel value for some other variables:
const char *gpg_sign = &sentinel_value;
...maybe set gpg_sign via parse_options...
if (gpg_sign != &sentinel_value)
...we got a non-default value...
Normally we'd use NULL as a sentinel value for a pointer, but it doesn't
work here because we also want to detect --no-gpg-sign, which is marked
by setting the pointer to NULL. We need a separate "this was not
touched" value, which is what this sentinel variable gives us.
So the code is correct as-is, but the sentinel variable itself is funny
enough that it's understandable for a compiler warning to flag it. Let's
try to appease the compiler.
There are a few possible options:
1. Instead of a variable, we could just construct an artificial
sentinel address like "1", "-1", etc. I think these technically
fall afoul of the C standard (even if we do not access them, even
constructing invalid pointers is not always allowed). But it's also
something we do elsewhere, and even happens in some standard
interfaces (e.g., mmap()'s MMAP_FAILED value). It does involve some
annoying casts, though.
2. We can mark it as static. That gives it a definite value, but
perhaps makes people wonder if the static-ness is important, when
it's not.
3. We can just give it a value to shut the compiler up, even though
nobody cares about that value.
I went with (3) here as the smallest and most obvious change.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 4 Aug 2025 01:44:27 +0000 (18:44 -0700)]
Merge branch 'hl/test-helper-fd-close'
A few file descriptors left unclosed upon program completion in a
few test helper programs are now closed.
* hl/test-helper-fd-close:
test-delta: close output descriptor after use
test-delta: use strbufs to hold input files
test-delta: handle errors with die()
t/helper/test-truncate: close file descriptor after truncation
"git rebase -i" with bogus rebase.instructionFormat configuration
failed to produce the todo file after recording the state files,
leading to confused "git status"; this has been corrected.
* ow/rebase-verify-insn-fmt-before-initializing-state:
rebase: write script before initializing state
Junio C Hamano [Mon, 4 Aug 2025 01:44:26 +0000 (18:44 -0700)]
Merge branch 'ps/object-store-midx'
Redefine where the multi-pack-index sits in the object subsystem,
which recently was restructured to allow multiple backends that
support a single object source that belongs to one repository. A
midx does span mulitple "object sources".
* ps/object-store-midx:
midx: remove now-unused linked list of multi-pack indices
packfile: stop using linked MIDX list in `get_all_packs()`
packfile: stop using linked MIDX list in `find_pack_entry()`
packfile: refactor `get_multi_pack_index()` to work on sources
midx: stop using linked list when closing MIDX
packfile: refactor `prepare_packed_git_one()` to work on sources
midx: start tracking per object database source
Junio C Hamano [Mon, 4 Aug 2025 01:44:26 +0000 (18:44 -0700)]
Merge branch 'kn/for-each-ref-skip'
"git for-each-ref" learns "--start-after" option to help
applications that want to page its output.
* kn/for-each-ref-skip:
ref-cache: set prefix_state when seeking
for-each-ref: introduce a '--start-after' option
ref-filter: remove unnecessary else clause
refs: selectively set prefix in the seek functions
ref-cache: remove unused function 'find_ref_entry()'
refs: expose `ref_iterator` via 'refs.h'
It was reported to the Git for Windows project that a simple `git init`
fails on Windows Server 2016:
D:\Dev\test> git init
error: could not write config file D:/Dev/test/.git/config: Function not implemented
fatal: could not set 'core.repositoryformatversion' to '0'
According to https://endoflife.date/windows-server, Windows Server 2016
is officially supported for another one-and-a-half years as of time of
writing, so this is not good.
The culprit is the `mingw_rename()` changes that try to use POSIX
semantics when available, but fail to fall back properly on Windows
Server 2016.
This fixes https://github.com/git-for-windows/git/issues/5695.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ReFS is an alternative filesystem to NTFS. On Windows 2022, it seems not
to support the rename operation using POSIX semantics that Git uses on
Windows as of 391bceae4350 (compat/mingw: support POSIX semantics for
atomic renames, 2024-10-27).
However, Windows 2022 reports `ERROR_NOT_SUPPORTED` in this instance.
This is in contrast to `ERROR_INVALID_PARAMETER` (as previous Windows
versions would report that do not support POSIX semantics in renames at
all).
Let's handle both errors the same: by falling back to the best-effort
option, namely to rename without POSIX semantics.
This fixes https://github.com/git-for-windows/git/issues/5427
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In ac33519ddfa8 (mingw: restrict file handle inheritance only on Windows
7 and later, 2019-11-22), I introduced code to safe-guard the
defense-in-depth handling that restricts handles' inheritance so that it
would work with Windows 7, too.
Let's revert this patch: Git for Windows dropped supporting Windows 7 (and
Windows 8) directly after Git for Windows v2.46.2. For full details, see
https://gitforwindows.org/requirements#windows-version.
Actually, on second thought: revert only the part that makes this handle
inheritance restriction logic optional and that suggests to open a bug
report if it fails, but keep the fall-back to try again without said
logic: There have been a few false positives over the past few years
(where the warning was triggered e.g. because Defender was still
accessing a file that Git wanted to overwrite), and the fall-back logic
seems to have helped occasionally in such situations.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
CreateFileW() requires FILE_FLAG_BACKUP_SEMANTICS to create a directory
handle [1] and errors out with ERROR_ACCESS_DENIED without this flag.
Fall back to accessing Directory handles this way.
René Scharfe [Sun, 3 Aug 2025 11:49:11 +0000 (13:49 +0200)]
describe: use prio_queue_replace()
Optimize the sequence get+put to peek+replace to avoid one unnecessary
heap rebalance.
Do that by tracking partial get operations in a prio_queue wrapper,
struct lazy_queue, and using wrapper functions that turn get into peek
and put into replace as needed. This is simpler than tracking the
state explicitly in the calling code.
We get a nice speedup on top of the previous patch's conversion to
prio_queue:
Benchmark 1: ./git_2.50.1 describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 1.559 s ± 0.002 s [User: 1.493 s, System: 0.051 s]
Range (min … max): 1.556 s … 1.563 s 10 runs
Benchmark 2: ./git_describe_pq describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 1.204 s ± 0.001 s [User: 1.138 s, System: 0.051 s]
Range (min … max): 1.202 s … 1.205 s 10 runs
Benchmark 3: ./git describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 850.9 ms ± 1.6 ms [User: 786.6 ms, System: 49.8 ms]
Range (min … max): 849.1 ms … 854.1 ms 10 runs
Summary
./git describe $(git rev-list v2.41.0..v2.47.0) ran
1.41 ± 0.00 times faster than ./git_describe_pq describe $(git rev-list v2.41.0..v2.47.0)
1.83 ± 0.00 times faster than ./git_2.50.1 describe $(git rev-list v2.41.0..v2.47.0)
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sun, 3 Aug 2025 11:38:29 +0000 (13:38 +0200)]
describe: use prio_queue
Replace the use a list-based priority queue whose order is maintained by
commit_list_insert_by_date() with a prio_queue. This avoids quadratic
worst-case complexity. And in the somewhat contrived example of
describing the 4751 commits from v2.41.0 to v2.47.0 in one go (to get a
sizable chunk of describe work with minimal ref loading overhead) it's
significantly faster:
Benchmark 1: ./git_2.50.1 describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 1.558 s ± 0.002 s [User: 1.492 s, System: 0.051 s]
Range (min … max): 1.557 s … 1.562 s 10 runs
Benchmark 2: ./git describe $(git rev-list v2.41.0..v2.47.0)
Time (mean ± σ): 1.209 s ± 0.006 s [User: 1.143 s, System: 0.051 s]
Range (min … max): 1.201 s … 1.219 s 10 runs
Summary
./git describe $(git rev-list v2.41.0..v2.47.0) ran
1.29 ± 0.01 times faster than ./git_2.50.1 describe $(git rev-list v2.41.0..v2.47.0)
Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 31 Jul 2025 22:54:33 +0000 (15:54 -0700)]
trace2: do not use strbuf_split*()
tr2_cfg_load_patterns() and tr2_load_env_vars() functions are
functions with very similar structure that each reads an environment
variable, splits its value at the ',' boundaries, and trims the
resulting string pieces into an array of strbufs.
But the code paths that later use these strbufs take no advantage of
the strbuf-ness of the result (they do not benefit from <ptr,len>
representation to avoid having to run strlen(<ptr>), for example).
Simplify the code by teaching these functions to split into a string
list instead; even the trimming comes for free ;-).
Junio C Hamano [Thu, 31 Jul 2025 22:54:32 +0000 (15:54 -0700)]
trace2: trim_trailing_newline followed by trim is a no-op
strbuf_trim_trailing_newline() removes a LF or a CRLF from the tail
of a string. If the code plans to call strbuf_trim() immediately
after doing so, the code is better off skipping the EOL trimming in
the first place. After all, LF/CRLF at the end is a mere special
case of whitespaces at the end of the string, which will be removed
by strbuf_rtrim() anyway.
Junio C Hamano [Thu, 31 Jul 2025 22:54:31 +0000 (15:54 -0700)]
sub-process: do not use strbuf_split*()
The code to read status from subprocess reads one packet line and
tries to find "status=<foo>". It is way overkill to split the line
into an array of two strbufs to extract <foo>.
Junio C Hamano [Thu, 31 Jul 2025 22:54:30 +0000 (15:54 -0700)]
environment: do not use strbuf_split*()
environment.c:get_git_namespace() learns the raw namespace from an
environment variable, splits it at "/", and appends them after
"refs/namespaces/"; the reason why it splits first is so that an
empty string resulting from double slashes can be omitted.
The split pieces do not need to be edited in any way, so an array of
strbufs is a wrong data structure to use. Instead split into a
string list and use the pieces from there.
Junio C Hamano [Thu, 31 Jul 2025 22:54:29 +0000 (15:54 -0700)]
config: do not use strbuf_split()
When parsing an old-style GIT_CONFIG_PARAMETERS environment
variable, the code parses key=value pairs by splitting them at '='
into an array of strbuf's. As strbuf_split() leaves the delimiter
at the end of the split piece, the code has to manually trim it.
If we split with string_list_split(), that becomes unnecessary.
Retire the use of strbuf_split() from this code path.
Note that the max parameter of string_list_split() is of
an ergonomically iffy design---it specifies the maximum number of
times the function is allowed to split, which means that in order to
split a text into up to 2 pieces, you have to pass 1, not 2.
Junio C Hamano [Thu, 31 Jul 2025 22:54:28 +0000 (15:54 -0700)]
notes: do not use strbuf_split*()
When reading copy instructions from the standard input, the program
reads a line, splits it into tokens at whitespace, and trims each of
the tokens before using. We no longer need to use strbuf just to be
able to trim, as string_list_split*() family now can trim while
splitting a string.
Retire the use of strbuf_split() from this code path.
Note that this loop is a bit sloppy in that it ensures at least
there are two tokens on each line, but ignores if there are extra
tokens on the line. Tightening it is outside the scope of this
series.
Junio C Hamano [Thu, 31 Jul 2025 22:54:27 +0000 (15:54 -0700)]
merge-tree: do not use strbuf_split*()
When reading merge instructions from the standard input, the program
reads from the standard input, splits the line into tokens at
whitespace, and trims each of them before using. We no longer need
to use strbuf just for trimming, as string_list_split*() family can
trim while splitting a string.
Junio C Hamano [Thu, 31 Jul 2025 22:54:26 +0000 (15:54 -0700)]
clean: do not use strbuf_split*() [part 2]
builtin/clean.c:filter_by_patterns_cmd() interactively reads a line
that has exclude patterns from the user and splits the line into a
list of patterns. It uses the strbuf_split() so that each split
piece can then trimmed.
There is no need to use strbuf anymore, thanks to the recent
enhancement to string_list_split*() family that allows us to trim
the pieces split into a string_list.
Junio C Hamano [Sun, 3 Aug 2025 05:42:29 +0000 (22:42 -0700)]
clean: do not pass the whole structure when it is not necessary
The callee parse_choice() only needs to access a NUL-terminated
string; instead of insisting to take a pointer to a strbuf, just
take a pointer to a character array.
Junio C Hamano [Thu, 31 Jul 2025 22:54:25 +0000 (15:54 -0700)]
clean: do not use strbuf_split*() [part 1]
builtin/clean.c:parse_choice() is fed a single line of input, which
is space or comma separated list of tokens, and a list of menu
items. It parses the tokens into number ranges (e.g. 1-3 that means
the first three items) or string prefix (e.g. 's' to choose the menu
item "(s)elect") that specify the elements in the menu item list,
and tells the caller which ones are chosen.
For parsing the input string, it uses strbuf_split() to split it
into bunch of strbufs. Instead use string_list_split_in_place(),
for a few reasons.
* strbuf_split() is a bad API function to use, that yields an array
of strbuf that is a bad data structure to use in general.
* string_list_split_in_place() allows you to split with "comma or
space"; the current code has to preprocess the input string to
replace comma with space because strbuf_split() does not allow
this.
Junio C Hamano [Thu, 31 Jul 2025 22:54:24 +0000 (15:54 -0700)]
clean: do not pass strbuf by value
When you pass a structure by value, the callee can modify the
contents of the structure that was passed in without having to worry
about changing the structure the caller has. Passing structure by
value sometimes (but not very often) can be a valid way to give
callee a temporary variable it can freely modify.
But not a structure with members that are pointers, like a strbuf.
builtin/clean.c:list_and_choose() reads a line interactively from
the user, and passes the line (in a strbuf) to parse_choice() by
value, which then munges by replacing ',' with ' ' (to accept both
comma and space separated list of choices). But because the strbuf
passed by value still shares the underlying character array buf[],
this ends up munging the caller's strbuf contents.
This is a catastrophe waiting to happen. If the callee causes the
strbuf to be reallocated, the buf[] the caller has will become
dangling, and when the caller does strbuf_release(), it would result
in double-free.
Stop calling the function with misleading call-by-value with strbuf.
Junio C Hamano [Thu, 31 Jul 2025 22:54:23 +0000 (15:54 -0700)]
wt-status: avoid strbuf_split*()
strbuf is a very good data structure to work with string data
without having to worry about running past the end of the string,
but strbuf_split() is a wrong API and an array of strbuf that the
function produces is a wrong thing to use in general. You do not
edit these N strings split out of a single strbuf simultaneously.
Often it is much better off to split a string into string_list and
work with the resulting strings.
wt-status.c:abbrev_oid_in_line() takes one line of rebase todo list
(like "pick e813a0200a7121b97fec535f0d0b460b0a33356c title"), and
for instructions that has an object name as the second token on the
line, replace the object name with its unique abbreviation. After
splitting these tokens out of a single line, no simultaneous edit on
any of these pieces of string that takes advantage of strbuf API
takes place. The final string is composed with strbuf API, but
these split pieces are merely used as pieces of strings and there is
no need for them to be stored in individual strbuf.
Instead, split the line into a string_list, and compose the final
string using these pieces.
Junio C Hamano [Sun, 3 Aug 2025 05:36:41 +0000 (22:36 -0700)]
Merge branch 'jc/string-list-split' into jc/strbuf-split
* jc/string-list-split:
string-list: split-then-remove-empty can be done while splitting
string-list: optionally omit empty string pieces in string_list_split*()
diff: simplify parsing of diff.colormovedws
string-list: optionally trim string pieces split by string_list_split*()
string-list: unify string_list_split* functions
string-list: align string_list_split() with its _in_place() counterpart
string-list: report programming error with BUG
Junio C Hamano [Fri, 1 Aug 2025 22:04:23 +0000 (15:04 -0700)]
string-list: split-then-remove-empty can be done while splitting
Thanks to the new STRING_LIST_SPLIT_NONEMPTY flag, a common pattern
to split a string into a string list and then remove empty items in
the resulting list is no longer needed. Instead, just tell the
string_list_split*() to omit empty ones while splitting.
Junio C Hamano [Fri, 1 Aug 2025 22:04:22 +0000 (15:04 -0700)]
string-list: optionally omit empty string pieces in string_list_split*()
Teach the unified split_string() machinery a new flag bit,
STRING_LIST_SPLIT_NONEMPTY, to cause empty split pieces to be
omitted from the resulting string list.
Junio C Hamano [Fri, 1 Aug 2025 22:04:21 +0000 (15:04 -0700)]
diff: simplify parsing of diff.colormovedws
The code to parse this configuration variable, whose value is a
comma-separated list of known tokens like "ignore-space-change" and
"ignore-all-space", uses string_list_split() to split the value into
pieces, and then places each piece of string in a strbuf to trim,
before comparing the result with the list of known tokens.
Thanks to the previous steps, now string_list_split() can trim the
resulting pieces before it places them in the string list. Use it
to simplify the code.
Junio C Hamano [Fri, 1 Aug 2025 22:04:20 +0000 (15:04 -0700)]
string-list: optionally trim string pieces split by string_list_split*()
Teach the unified split_string() to take an optional "flags" word,
and define the first flag STRING_LIST_SPLIT_TRIM to cause the split
pieces to be trimmed before they are placed in the string list.
Junio C Hamano [Fri, 1 Aug 2025 22:04:19 +0000 (15:04 -0700)]
string-list: unify string_list_split* functions
Thanks to the previous step, the only difference between these two
related functions is that string_list_split() works on a string
without modifying its contents (i.e. taking "const char *") and the
resulting pieces of strings are their own copies in a string list,
while string_list_split_in_place() works on a mutable string and the
resulting pieces of strings come from the original string.
Consolidate their implementations into a single helper function, and
make them a thin wrapper around it. We can later add an extra flags
parameter to extend both of these functions by updating only the
internal helper function.
Junio C Hamano [Fri, 1 Aug 2025 22:04:18 +0000 (15:04 -0700)]
string-list: align string_list_split() with its _in_place() counterpart
The string_list_split_in_place() function was updated by 52acddf3
(string-list: multi-delimiter `string_list_split_in_place()`,
2023-04-24) to take more than one delimiter characters, hoping that
we can later use it to replace our uses of strtok(). We however did
not make a matching change to the string_list_split() function,
which is very similar.
Before giving both functions more features in future commits, allow
string_list_split() to also take more than one delimiter characters
to make them closer to each other.
Johannes Sixt [Sat, 2 Aug 2025 12:43:25 +0000 (14:43 +0200)]
Merge branch 'ml/tcl90'
* ml/tcl90:
git-gui: Allow Tcl 9.0
git-gui: use -profile tcl8 on encoding conversions
git-gui: use -profile tcl8 for file input with Tcl 9
git-gui: themed.tcl: use full namespace for color
git-gui: remove EOL translation for gets
git-gui: do not mix -translation binary and -encoding
git-gui: replace encoding binary with iso8859-1
git-gui: translation binary defines iso8859-1
git-gui: assure -eofchar {} on all channels
Johannes Sixt [Sat, 2 Aug 2025 12:41:48 +0000 (14:41 +0200)]
Merge branch 'master' of https://github.com/alshopov/git-gui
* 'master' of https://github.com/alshopov/git-gui:
git-gui i18n: Remove the locations within the Bulgarian translation
git-gui i18n: Update Bulgarian translation (557t)
Junio C Hamano [Fri, 1 Aug 2025 22:04:17 +0000 (15:04 -0700)]
string-list: report programming error with BUG
Passing a string list that has .strdup_strings bit unset to
string_list_split(), or one that has .strdup_strings bit set to
string_list_split_in_place(), is a programmer error. Do not use
die() to abort the execution. Use BUG() instead.
As a developer-facing message, the message string itself should
be a lot more concise, but let's keep the original one for now.
Junio C Hamano [Fri, 1 Aug 2025 18:27:14 +0000 (11:27 -0700)]
Merge branch 'sk/reftable-clarify-tests'
The reftable unit tests are now ported to the "clar" unit testing
framework.
* sk/reftable-clarify-tests:
t/unit-tests: finalize migration of reftable-related tests
t/unit-tests: convert reftable stack test to use clar
t/unit-tests: convert reftable record test to use clar
t/unit-tests: convert reftable readwrite test to use clar
t/unit-tests: convert reftable table test to use clar
t/unit-tests: convert reftable pq test to use clar
t/unit-tests: convert reftable merged test to use clar
t/unit-tests: convert reftable block test to use clar
t/unit-tests: convert reftable basics test to use clar test framework
t/unit-tests: implement clar specific reftable test helper functions
To help our developers, document what C99 language features are
being considered for adoption, in addition to what past experiments
have already decided.
* jc/document-test-balloons-in-flight:
CodingGuidelines: document test balloons in flight
Martin Storsjö [Fri, 1 Aug 2025 16:28:14 +0000 (19:28 +0300)]
meson: tolerate errors from git ls-files --deduplicate
When using the Meson build system with versions of Git before 2.31,
that does not yet know the `git ls-files --deduplicate` option, one
can observe the following error:
The failing command is used to find all header files in our code
base, which is required for static analysis.
Static analysis is an entirely optional feature that distributors
typically don't care about, and we already know to skip running the
command when we are not in a Git repository. But we do not handle
the above failure gracefully, even though we could.
Fix this by passing `check: false` to `run_command`, which makes it
tolerate failures. Then check `returncode()` manually to decide
whether to inspect the output.
Signed-off-by: Martin Storsjö <martin@martin.st> Signed-off-by: Junio C Hamano <gitster@pobox.com>
6e411d20440 (Initial draft of fast-import documentation., 2007-02-05)
pointed out how much time a fast-import took on some hardware with a
specific cost. Let’s further point out that this experiment was done
in 2007. So modern hardware should have no issues with such a repo.
Also move the parenthetical to the end now that it contains four words.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Fri, 1 Aug 2025 17:06:55 +0000 (10:06 -0700)]
CodingGuidelines: clarify that S_release() does not reinitialize
In the section for naming various API functions, the fact that
S_release() only releases the resources without preparing the
structure for immediate reuse becomes only apparent when you
readentries for S_release() and S_clear().
Clarify the description of S_release() a bit to make the entry self
sufficient.
Johannes Sixt [Fri, 1 Aug 2025 16:39:15 +0000 (18:39 +0200)]
Merge branch 'ml/tcltk-9'
* ml/tcltk-9:
gitk: allow Tcl/Tk 9.0+
gitk: use -profile tcl8 on encoding conversions
gitk: use -profile tcl8 for file input with Tcl 9
gitk: Tcl9 doesn't expand ~, use $env(HOME)
gitk: switch to -translation binary
gitk: update scrolling for TclTk 8.7+ / TIP 474
Johannes Sixt [Fri, 1 Aug 2025 16:35:44 +0000 (18:35 +0200)]
Merge branch 'master' of github.com:alshopov/gitk
* 'master' of github.com:alshopov/gitk:
gitk i18n: Remove the locations within the Bulgarian translation
gitk i18n: Update Bulgarian translation (322t)
Johannes Sixt [Thu, 31 Jul 2025 16:07:36 +0000 (18:07 +0200)]
interactive: do strip trailing CRLF from input
`git reset -p file` on a Windows CMD refuses to do anything useful
with this error message:
(1/5) Unstage this hunk [y,n,q,a,d,j,J,g,/,e,p,?]? n
'nly one letter is expected, got 'n
The letter 'O' at the beginning of the line is overwritten by an
apostrophe, so, clearly the parser sees the string "n\r".
strbuf_trim_trailing_newline() removes trailing CRLF from the string.
In particular, it first removes LF if present, and if that was the
case, it also removes CR if present.
git_read_line_interactively() clearly intends to remove CRLF as it
calls strbuf_trim_trailing_newline(). However, input is gathered using
strbuf_getline_lf(), which already removes the trailing LF. Now
strbuf_trim_trailing_newline() does not see LF, so that it does not
remove CR, either, and leaves it for the caller to process.
Call strbuf_getline() instead, which removes both LF and CR.
Signed-off-by: Johannes Sixt <j6t@kdbg.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 31 Jul 2025 19:23:56 +0000 (12:23 -0700)]
Merge branch 'ps/config-wo-the-repository' into pw/3.0-commentchar-auto-deprecation
* ps/config-wo-the-repository: (21 commits)
config: fix sign comparison warnings
config: move Git config parsing into "environment.c"
config: remove unused `the_repository` wrappers
config: drop `git_config_set_multivar()` wrapper
config: drop `git_config_get_multivar_gently()` wrapper
config: drop `git_config_set_multivar_in_file_gently()` wrapper
config: drop `git_config_set_in_file_gently()` wrapper
config: drop `git_config_set()` wrapper
config: drop `git_config_set_gently()` wrapper
config: drop `git_config_set_in_file()` wrapper
config: drop `git_config_get_bool()` wrapper
config: drop `git_config_get_ulong()` wrapper
config: drop `git_config_get_int()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string()` wrapper
config: drop `git_config_get_string_multi()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get_value()` wrapper
config: drop `git_config_get()` wrapper
config: drop `git_config_clear()` wrapper
...
t7450: inspect the correct path a broken code would write to
Prior to 05e9cd64 (config: quote values containing CR character,
2025-05-19), a repository can trick "clone --recurse-submodules"
into running a post-checkout hook shipped with the project. The
test was written to make sure the trick would no longer run the
hook with the fix in the commit.
However, the test did not check for the path the hook would
create; correct the path to the expected one if the bug were
still with us.
Signed-off-by: chenjianhu <chenjianhu@kylinos.cn> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Levedahl [Sat, 17 May 2025 02:30:37 +0000 (22:30 -0400)]
git-gui: Allow Tcl 9.0
TclTk 9.0 is now shipping, and git-gui is now patched to support use of
this newer version. Adjust required versions to allow Tcl/Tk >= 8.6,
including 9.x.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Mark Levedahl [Sat, 31 May 2025 19:18:31 +0000 (15:18 -0400)]
git-gui: use -profile tcl8 on encoding conversions
git-gui in the prior commit learned to apply -profile tcl8 when reading
files, avoiding errors on non-binary data streams whose encoding is not
utf-8. But, git-gui also consumes binary data streams (generally blobs
from commits) as the output of commands, and internally decodes this to
support various displays.
With Tcl9, errors occur in this decoding for the same reasons described
in the previous commit: basically, the underlying data may contain
extended ascii characters violating the assumption of utf-8 encoding.
This problem has a similar fix to the prior issue: we must use the tlc8
profile when converting this data to the internal unicode format. Do so,
again only on Tcl9 as Tcl8.6 does not recognize -profile, and only Tcl
9.0 makes strict the default.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Mark Levedahl [Sat, 31 May 2025 18:52:35 +0000 (14:52 -0400)]
git-gui: use -profile tcl8 for file input with Tcl 9
git-gui invokes many git commands expecting output in utf-8 encoding,
but git accepts extended ascii (code page unknown) as utf-8 without
validating, so cannot guarantee valid utf-8 on output. In particular,
using any extended ascii code page has long been acceptable on git given
that everyone on a project is aware of and uses that same code page to
view all data. utf-8 accepts only 7-bit ascii characters in single
bytes, and any characters outside of that base set require at least two
bytes for representation in unicode.
Tcl is a string based language, and transcodes all input data to an
internal unicode format, and to whatever format is requested on output:
"pure" binary is recoded byte by byte using iso8859-1. Tcl8.x silently
recodes invalid utf-8 as binary data, so extended ascii characters
maintain their binary value on output but may not display correctly.
Tcl 8.7 added three profiles to control this behaviour: strict (raises
exceptions), replace (replaces each invalid byte with ?), and the
default tcl8 maintaining the old behavior. Tcl 9 changes the default
profile to strict, meaning any invalid utf-8 raises an exception that
git-gui does not handle.
An example of this in the git repository is commit 7eb93c8965 ("[PATCH]
Simplify git script", 2005-09-07). This includes extended ascii
characters in the author name and commit message.
The tcl8 profile used so far has acceptable behavior given git-gui's
acceptance: this allows git-gui to accept extended ascii though it may
display incorrectly. Let's continue that behavior by overriding open to
use the tcl8 profile on Tcl9 and later: Tcl 8.6 does not understand
fconfigure -profile, and Tcl 8.7 maintains the tcl8 profile.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Mark Levedahl [Sat, 10 May 2025 01:39:56 +0000 (21:39 -0400)]
git-gui: themed.tcl: use full namespace for color
Tcl 9 imposes strict requirements on namespaces for variables, while Tcl
8 does not. lib/themed.tcl does not use the fully qualified name for the
"color" namespace, with result that variables are not found with Tcl
9.0. Fix this.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Mark Levedahl [Thu, 22 May 2025 01:13:27 +0000 (21:13 -0400)]
git-gui: remove EOL translation for gets
git-gui configures '-translation lf' on a number of channels. The
default configuration is 'auto', which on input changes any occurrence
of \n, \r, or \r\n to \n, and on output changes any such EOL sequence to
a platform dependent value (\n on Unix, \r\n on Windows). Such
translation can be necessary, but much of what is configured now is
redundant.
In particular, many of the channels configured this way are then
consumed by gets, which already recognizes any of \n, \r, or \r\n as
terminators. Configuring a channel to first change these line endings,
then give the result to gets, is redundant.
The valid uses of -translation lf are for output where we do not want
\r\n on Windows, and for consuming entire files without going through
gets, assuring that \n will be used internally. Let's remove all the
others that only serve to confuse.
lib/diff.tcl must have -translation lf because \r\n might be stored in
the repository (e.g., on Windows, with no crlf translation enabled), and
git will treat \n as the line ending, while the preceding \r is just
whitespace, and these may be split by ANSI color coding. git-gui's
read_diff handles this correctly as-is.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Johannes Sixt [Thu, 31 Jul 2025 17:20:22 +0000 (19:20 +0200)]
Merge branch 'ml/windows-tie-loose-ends'
* ml/windows-tie-loose-ends:
git-gui: use /cmd/git-gui.exe for shortcut
git-gui: Windows tk_getSaveFile is not useful for shortcuts
git-gui: let nice work on Windows
git-gui: do not add directories to PATH on Windows
Since its introduction in 8c76212 (git-gui: Add a simple implementation
of SSH_ASKPASS., 2008-10-15), git-gui--askpass has been calling whatever
wish interpreter is in the path, unlike git-gui.
Correct that by turning it into a script that would be processed at build
time.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org>
git-gui: fix dependency of GITGUI_MAIN on generator
Since 854e883 (git-gui: extract script to generate "git-gui",
2025-03-11), the logic to generate the main script was pulled
out of the Makefile, but adding the resulting generator as a
dependency was missed.
If the logic changes, the main script should be regenerated, so
add it as a dependency.
Signed-off-by: Carlo Marcelo Arenas Belón <carenas@gmail.com> Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Michael Rappazzo [Thu, 31 Jul 2025 11:53:21 +0000 (07:53 -0400)]
gitk: filter invisible upstream refs from reference list
In refill_reflist, upstream refs are now only included if their
commits are visible in the current view. This prevents display
issues like multiple highlighted branches when clicking entries.
Signed-off-by: Michael Rappazzo <michael.rappazzo@infor.com>
Junio C Hamano [Wed, 30 Jul 2025 23:18:16 +0000 (16:18 -0700)]
test-hashmap: document why it is no longer used but still there
As I ended up wasting a few dozen minutes looking for the reason why
this is still here, help future developers by saving them from
wasting their time by documenting why this code that apparently is
not used by anybody is still here.
Johannes Sixt [Tue, 29 Jul 2025 12:52:54 +0000 (14:52 +0200)]
gitk: avoid duplicated upstream refs
It is possible that multiple local branches track the same upstream.
In this case, the refs dialog lists the tracked upstream branch
multiple times. This is undesirable. Make them unique.
Junio C Hamano [Tue, 29 Jul 2025 18:34:08 +0000 (11:34 -0700)]
Merge branch 'ps/object-store-midx' into ps/object-store-midx-dedup-info
* ps/object-store-midx:
midx: remove now-unused linked list of multi-pack indices
packfile: stop using linked MIDX list in `get_all_packs()`
packfile: stop using linked MIDX list in `find_pack_entry()`
packfile: refactor `get_multi_pack_index()` to work on sources
midx: stop using linked list when closing MIDX
packfile: refactor `prepare_packed_git_one()` to work on sources
midx: start tracking per object database source
Leon Michalak [Tue, 29 Jul 2025 07:01:51 +0000 (07:01 +0000)]
add-patch: add diff.context command line overrides
This patch compliments the previous commit, where builtins that use
add-patch infrastructure now respect diff.context and
diff.interHunkContext file configurations.
In particular, this patch helps users who don't want to set persistent
context configurations or just want a way to override them on a one-time
basis, by allowing the relevant builtins to accept corresponding command
line options that override the file configurations.
This mimics commands such as diff and log, which allow for both context
file configuration and command line overrides.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Leon Michalak [Tue, 29 Jul 2025 07:01:50 +0000 (07:01 +0000)]
add-patch: respect diff.context configuration
Various builtins that use add-patch infrastructure do not respect
the user's diff.context and diff.interHunkContext file configurations.
The user may be used to seeing their diffs with customized context size,
but not in the patches "git add -p" shows them to pick from.
Teach add-patch infrastructure to read these configuration variables and
pass their values when spawning the underlying plumbing commands as
their command line option.
Signed-off-by: Leon Michalak <leonmichalak6@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
meson: ensure correct "clar-decls.h" header is used
The "clar-decls.h" header gets generated by us to extract prototypes of
unit test functions from our clar-based tests. This generated file is
then written into "t/unit-tests/" and included via "unit-test.h". The
intent of all this is that we can keep "-Wmissing-prototype" warnings
enabled. If we had that warning disabled, it would be easy to miss in
case any of the non-static functions had a typo in its name and thus
wasn't picked up by our test case extractor.
Including the file directly has a big downside though: if a source tree
was built both with our Makefile and with Meson, then the Meson build
would include the "clar-decls.h" file from our Makefile. And if those
are out of sync we get compiler errors.
We already fixed a similar issue in 4771501c0a (meson: ensure correct
version-def.h is used, 2025-01-14). Let's do the same and pass the
absolute path to "clar-decls.h" via a preprocessor define.
Signed-off-by: Patrick Steinhardt <ps@pks.im> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Fri, 25 Jul 2025 05:13:09 +0000 (01:13 -0400)]
t7510: use $PWD instead of $(pwd) inside PATH
On Windows, $(pwd) will give us a Windows-style path like "D:/foo".
Putting that into $PATH confuses anybody parsing that variable, since
colon is a separator character in $PATH. Instead, we should use the
Unix-style value we get from $PWD ("/d/foo").
This is similar to the cases fixed by 71dd50472d (t0021, t5615: use $PWD
instead of $(pwd) in PATH-like shell variables, 2016-11-11).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Han Young [Mon, 28 Jul 2025 03:55:48 +0000 (11:55 +0800)]
blame: remove parameter detailed in get_commit_info()
The get_commit_info() function accepts a parameter that can be used
to stop the commit parsing early. However, none of the callers use
this feature, and testing proved that the performance gain of
stopping parsing early is negligible and unmeasurable.
Signed-off-by: Han Young <hanyang.tony@bytedance.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin: unmark git-switch and git-restore as experimental
In 4e43b7ff (Declare both git-switch and git-restore experimental,
2019-04-25), the newly introduced git-switch(1) and git-restore(1)
commands were marked as experimental. This was done to provide time to
make breaking changes to the interface. It has now been over six years
since these commands were implemented and there hasn't been much change.
Consequently, users have grown to rely on how these commands work and it
is no longer feasible to make any breaking changes.
Let's remove the experimental label for git-switch(1) and
git-restore(1).
Signed-off-by: Justin Tobler <jltobler@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
ref-filter: use REF_ITERATOR_SEEK_SET_PREFIX instead of '1'
In the commit 51511d68f4 (for-each-ref: introduce a '--start-after'
option, 2025-07-15), for introducing the '--start-after' flag, the
`ref_iterator_seek()` was modified to also accept a flag. This was to
allow the function to also set the prefix when
'REF_ITERATOR_SEEK_SET_PREFIX' was set.
In `do_filter_refs()` instead of passing the flag, we pass in '1' which
is the value of the flag. While this works, this is definitely hard to
read and introduces inconsistency. Change it to use the flag.
While here, remove the unnecessary 'if (prefix)' clause in the 'else'
statement, since the block already checks for 'prefix'.
Reported-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t6302: add test combining '--start-after' with '--exclude'
The '--start-after' doesn't explicitly mention being compatible with the
'--exclude' flag, generally only incompatibility is explicitly called
out. However, it would be nice to test the compatibility between the
two to avoid future regressions. Let's do that.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
for-each-ref: reword the documentation for '--start-after'
The documentation for '--start-after' states that the flag cannot be
used with general pattern matching. This is a bit vague, since there is
no clear understanding about what 'general' means here. Rewrite the
sentence to be more specific.
While here, fix a typo in the 'OPT_STRING'.
Helped-by: Junio C Hamano <gitster@pobox.com> Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the 'git-for-each-ref(1)' documentation with two corrections:
1. Add parentheses around `--exclude=<pattern>` to indicate this option
can be repeated as a complete unit.
2. Move `--stdin | <pattern> ...` to the end, after all flags, since
`<pattern>` is a positional argument that should appear last in the
argument list.
While here, change to using the synopsis block which will automatically
format placeholders in italics and keywords in monospace.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit 090eb5336c (refs: selectively set prefix in the seek
functions, 2025-07-15) modified the ref-cache iterator to support
seeking to a specified marker without setting the prefix.
The commit adds and uses an integer 'len' to capture the length of the
seek marker to compare with the entries of a given directory. Since the
type of the variable is 'int', this is met with a typecast of converting
a `strlen` to 'int' so it can be assigned to the 'len' variable.
This is whole operation is a bit wrong:
1. Since the 'len' variable is eventually used in a 'strncmp', it should
have been of type 'size_t'.
2. This also truncates the value provided from 'strlen' to an int, which
could cause a large refname to produce a negative number.
Let's do the correct thing here and simply use 'size_t' for `len`.
Signed-off-by: Karthik Nayak <karthik.188@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Mon, 28 Jul 2025 19:02:34 +0000 (12:02 -0700)]
Merge branch 'ac/auto-comment-char-fix'
"git commit" that concludes a conflicted merge failed to notice and remove
existing comment added automatically (like "# Conflicts:") when the
core.commentstring is set to 'auto'.
* ac/auto-comment-char-fix:
config: set comment_line_str to "#" when core.commentChar=auto
commit: avoid scanning trailing comments when 'core.commentChar' is "auto"
The pop_most_recent_commit() function can have quite expensive
worst case performance characteristics, which has been optimized by
using prio-queue data structure.
* rs/pop-recent-commit-with-prio-queue:
commit: use prio_queue_replace() in pop_most_recent_commit()
prio-queue: add prio_queue_replace()
commit: convert pop_most_recent_commit() to prio_queue
Christian Couder [Fri, 25 Jul 2025 16:05:36 +0000 (18:05 +0200)]
t9350: redirect input to only fast-import
A number of tests in "t9350-fast-export.sh" are using sub-shells to
redirect content to a number of commands instead of only
`git fast-import`.
This is confusing and possibly error-prone, so let's change those tests
so that no sub-shell is used and the content goes only to
`git fast-import`.
Reported-by: Elijah Newren <newren@gmail.com> Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Fri, 25 Jul 2025 18:41:24 +0000 (20:41 +0200)]
git: show alias info only with lone -h
Builtin commands show usage information on stdout if called with -h as
their only option, usage.c::show_usage_if_asked() makes sure of that.
Aliases show alias information on stderr if called with -h as the first
option since a9a60b94cc (git.c: handle_alias: prepend alias info when
first argument is -h, 2018-10-09). This is surprising when using
aliases for commands that take -h as a normal argument among others,
like git grep.
Tighten the condition and show the alias information only if -h is the
only option given, to be consistent with builtins.
It's probably still is a good idea to write to stderr, as an alias
command doesn't have to be a builtin and could instead produce output
with just -h that might be spoiled by an extra alias info line.
Reported-by: Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by: René Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
projects / thirdparty / git.git / log
