Fix mismerge of the arm64 / timer-core interrupt handling changes
Commit c43267e6794a ("Merge tag 'arm64-upstream' of git://...") had a
conflict in the irq entry/exit code due to commit c5538d0141b3 ("entry:
Split kernel mode logic from irqentry_{enter,exit}()") having moved the
core code in irqentry_enter/exit() from kernel/entry/common.c into
helper inline functions in include/linux/irq-entry-common.h.
On the other side of the merge, the timer-core code had introduced
deferred hrtimer rearming infrastructure in commit 0e98eb14814e ("entry:
Prepare for deferred hrtimer rearming"), adding two calls to
hrtimer_rearm_deferred() in irqentry_enter().
When merging the two, moving the two calls to the new location wasn't a
problem, but afterwards I had made the mistake of looking what had
happened in linux-next. And linux-next had a very different merge
resolution in commit 04f02dc3ea74 ("Merge tag 'entry-for-arm64-26-04-08'
into sched/hrtick"), which had unified the two calls into one single
call-site in irqentry_exit_to_kernel_mode_preempt().
And that merge resolution looked cleverer than the straightforward one I
had done, so I re-did my merge the way it had been done in linux-next.
But it turns out nobody apparently tests linux-next, and the merge in
linux-next was just wrong.
The difference is that hrtimer_rearm_deferred() doesn't get called at
all for the case when state.exit_rcu is true, and the boot will
typically fail due to timers not triggering correctly.
So this undoes the "clever" merge, and does the straightforward one
instead.
Merge tag 'kernel-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull pid_namespace updates from Christian Brauner:
- pid_namespace: make init creation more flexible
Annotate ->child_reaper accesses with {READ,WRITE}_ONCE() to protect
the unlocked readers from cpu/compiler reordering, and enforce that
pid 1 in a pid namespace is always the first allocated pid (the
set_tid path already required this).
On top of that, allow opening pid_for_children before the pid
namespace init has been created. This lets one process create the pid
namespace and a different process create the init via setns(), which
makes clone3(set_tid) usable in all cases evenly and is particularly
useful to CRIU when restoring nested containers.
A new selftest covers both the basic create-pidns-then-init flow and
the cross-process variant, and a MAINTAINERS entry for the pid
namespace code is added.
- unrelated signal cleanup: update outdated comment for the removed
freezable_schedule()
* tag 'kernel-7.1-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: update outdated comment for removed freezable_schedule()
MAINTAINERS: add a pid namespace entry
selftests: Add tests for creating pidns init via setns
pid_namespace: allow opening pid_for_children before init was created
pid: check init is created first after idr alloc
pid_namespace: avoid optimization of accesses to ->child_reaper
Merge tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
- Add FSMOUNT_NAMESPACE flag to fsmount() that creates a new mount
namespace with the newly created filesystem attached to a copy of the
real rootfs. This returns a namespace file descriptor instead of an
O_PATH mount fd, similar to how OPEN_TREE_NAMESPACE works for
open_tree().
This allows creating a new filesystem and immediately placing it in a
new mount namespace in a single operation, which is useful for
container runtimes and other namespace-based isolation mechanisms.
This accompanies OPEN_TREE_NAMESPACE and avoids a needless detour via
OPEN_TREE_NAMESPACE to get the same effect. Will be especially useful
when you mount an actual filesystem to be used as the container
rootfs.
- Currently, creating a new mount namespace always copies the entire
mount tree from the caller's namespace. For containers and sandboxes
that intend to build their mount table from scratch this is wasteful:
they inherit a potentially large mount tree only to immediately tear
it down.
This series adds support for creating a mount namespace that contains
only a clone of the root mount, with none of the child mounts. Two
new flags are introduced:
- CLONE_EMPTY_MNTNS (0x400000000) for clone3(), using the 64-bit flag space
- UNSHARE_EMPTY_MNTNS (0x00100000) for unshare()
Both flags imply CLONE_NEWNS. The resulting namespace contains a
single nullfs root mount with an immutable empty directory. The
intended workflow is to then mount a real filesystem (e.g., tmpfs)
over the root and build the mount table from there.
- Allow MOVE_MOUNT_BENEATH to target the caller's rootfs, allowing to
switch out the rootfs without pivot_root(2).
The traditional approach to switching the rootfs involves
pivot_root(2) or a chroot_fs_refs()-based mechanism that atomically
updates fs->root for all tasks sharing the same fs_struct. This has
consequences for fork(), unshare(CLONE_FS), and setns().
This series instead decomposes root-switching into individually
atomic, locally-scoped steps:
Since each step only modifies the caller's own state, the
fork/unshare/setns races are eliminated by design.
A key step to making this possible is to remove the locked mount
restriction. Originally MOVE_MOUNT_BENEATH doesn't support mounting
beneath a mount that is locked. The locked mount protects the
underlying mount from being revealed. This is a core mechanism of
unshare(CLONE_NEWUSER | CLONE_NEWNS). The mounts in the new mount
namespace become locked. That effectively makes the new mount table
useless as the caller cannot ever get rid of any of the mounts no
matter how useless they are.
We can lift this restriction though. We simply transfer the locked
property from the top mount to the mount beneath. This works because
what we care about is to protect the underlying mount aka the parent.
The mount mounted between the parent and the top mount takes over the
job of protecting the parent mount from the top mount mount. This
leaves us free to remove the locked property from the top mount which
can consequently be unmounted:
unshare(CLONE_NEWUSER | CLONE_NEWNS)
and we inherit a clone of procfs on /proc then currently we cannot
unmount it as:
umount -l /proc
will fail with EINVAL because the procfs mount is locked.
After this series we can now do:
mount --beneath -t tmpfs tmpfs /proc
umount -l /proc
after which a tmpfs mount has been placed beneath the procfs mount.
The tmpfs mount has become locked and the procfs mount has become
unlocked.
This means you can safely modify an inherited mount table after
unprivileged namespace creation.
Afterwards we simply make it possible to move a mount beneath the
rootfs allowing to upgrade the rootfs.
Removing the locked restriction makes this very useful for containers
created with unshare(CLONE_NEWUSER | CLONE_NEWNS) to reshuffle an
inherited mount table safely and MOVE_MOUNT_BENEATH makes it possible
to switch out the rootfs instead of using the costly pivot_root(2).
* tag 'vfs-7.1-rc1.mount.v2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
selftests/namespaces: remove unused utils.h include from listns_efault_test
selftests/fsmount_ns: add missing TARGETS and fix cap test
selftests/empty_mntns: fix wrong CLONE_EMPTY_MNTNS hex value in comment
selftests/empty_mntns: fix statmount_alloc() signature mismatch
selftests/statmount: remove duplicate wait_for_pid()
mount: always duplicate mount
selftests/filesystems: add MOVE_MOUNT_BENEATH rootfs tests
move_mount: allow MOVE_MOUNT_BENEATH on the rootfs
move_mount: transfer MNT_LOCKED
selftests/filesystems: add clone3 tests for empty mount namespaces
selftests/filesystems: add tests for empty mount namespaces
namespace: allow creating empty mount namespaces
selftests: add FSMOUNT_NAMESPACE tests
selftests/statmount: add statmount_alloc() helper
tools: update mount.h header
mount: add FSMOUNT_NAMESPACE
mount: simplify __do_loopback()
mount: start iterating from start of rbtree
Merge tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Support HW queue leasing, allowing containers to be granted access
to HW queues for zero-copy operations and AF_XDP
- Number of code moves to help the compiler with inlining. Avoid
output arguments for returning drop reason where possible
- Rework drop handling within qdiscs to include more metadata about
the reason and dropping qdisc in the tracepoints
- Remove the rtnl_lock use from IP Multicast Routing
- Pack size information into the Rx Flow Steering table pointer
itself. This allows making the table itself a flat array of u32s,
thus making the table allocation size a power of two
- Report TCP delayed ack timer information via socket diag
- Add ip_local_port_step_width sysctl to allow distributing the
randomly selected ports more evenly throughout the allowed space
- Add support for per-route tunsrc in IPv6 segment routing
- Start work of switching sockopt handling to iov_iter
- Improve dynamic recvbuf sizing in MPTCP, limit burstiness and avoid
buffer size drifting up
- Support MSG_EOR in MPTCP
- Add stp_mode attribute to the bridge driver for STP mode selection.
This addresses concerns about call_usermodehelper() usage
- Remove UDP-Lite support (as announced in 2023)
- Remove support for building IPv6 as a module. Remove the now
unnecessary function calling indirection
Cross-tree stuff:
- Move Michael MIC code from generic crypto into wireless, it's
considered insecure but some WiFi networks still need it
Netfilter:
- Switch nft_fib_ipv6 module to no longer need temporary dst_entry
object allocations by using fib6_lookup() + RCU.
Florian W reports this gets us ~13% higher packet rate
- Convert IPVS's global __ip_vs_mutex to per-net service_mutex and
switch the service tables to be per-net. Convert some code that
walks the service lists to use RCU instead of the service_mutex
- Add more opinionated input validation to lower security exposure
- Make IPVS hash tables to be per-netns and resizable
- Multi-link support for FILS, probe response templates and client
probing
- New APIs and mac80211 support for NAN (Neighbor Aware Networking,
aka Wi-Fi Aware) so less work must be in firmware
Driver API:
- Add numerical ID for devlink instances (to avoid having to create
fake bus/device pairs just to have an ID). Support shared devlink
instances which span multiple PFs
- Add standard counters for reporting pause storm events (implement
in mlx5 and fbnic)
- Add configuration API for completion writeback buffering (implement
in mana)
- Support driver-initiated change of RSS context sizes
- Support DPLL monitoring input frequency (implement in zl3073x)
- Support per-port resources in devlink (implement in mlx5)
Misc:
- Expand the YAML spec for Netfilter
Drivers
- Software:
- macvlan: support multicast rx for bridge ports with shared
source MAC address
- team: decouple receive and transmit enablement for IEEE 802.3ad
LACP "independent control"
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- support high order pages in zero-copy mode (for payload
coalescing)
- support multiple packets in a page (for systems with 64kB
pages)
- Broadcom 25-400GE (bnxt):
- implement XDP RSS hash metadata extraction
- add software fallback for UDP GSO, lowering the IOMMU cost
- Broadcom 800GE (bnge):
- add link status and configuration handling
- add various HW and SW statistics
- Marvell/Cavium:
- NPC HW block support for cn20k
- Huawei (hinic3):
- add mailbox / control queue
- add rx VLAN offload
- add driver info and link management
- Ethernet NICs:
- Marvell/Aquantia:
- support reading SFP module info on some AQC100 cards
- Realtek PCI (r8169):
- add support for RTL8125cp
- Realtek USB (r8152):
- support for the RTL8157 5Gbit chip
- add 2500baseT EEE status/configuration support
- Ethernet NICs embedded and off-the-shelf IP:
- Synopsys (stmmac):
- cleanup and reorganize SerDes handling and PCS support
- cleanup descriptor handling and per-platform data
- cleanup and consolidate MDIO defines and handling
- shrink driver memory use for internal structures
- improve Tx IRQ coalescing
- improve TCP segmentation handling
- add support for Spacemit K3
- Cadence (macb):
- support PHYs that have inband autoneg disabled with GEM
- support IEEE 802.3az EEE
- rework usrio capabilities and handling
- AMD (xgbe):
- improve power management for S0i3
- improve TX resilience for link-down handling
- Virtual:
- Google cloud vNIC:
- support larger ring sizes in DQO-QPL mode
- improve HW-GRO handling
- support UDP GSO for DQO format
- PCIe NTB:
- support queue count configuration
- Ethernet PHYs:
- automatically disable PHY autonomous EEE if MAC is in charge
- Broadcom:
- add BCM84891/BCM84892 support
- Micrel:
- support for LAN9645X internal PHY
- Realtek:
- add RTL8224 pair order support
- support PHY LEDs on RTL8211F-VD
- support spread spectrum clocking (SSC)
- Maxlinear:
- add PHY-level statistics via ethtool
- Ethernet switches:
- Maxlinear (mxl862xx):
- support for bridge offloading
- support for VLANs
- support driver statistics
- Bluetooth:
- large number of fixes and new device IDs
- Mediatek:
- support MT6639 (MT7927)
- support MT7902 SDIO
- WiFi:
- Intel (iwlwifi):
- UNII-9 and continuing UHR work
- MediaTek (mt76):
- mt7996/mt7925 MLO fixes/improvements
- mt7996 NPU support (HW eth/wifi traffic offload)
- Qualcomm (ath12k):
- monitor mode support on IPQ5332
- basic hwmon temperature reporting
- support IPQ5424
- Realtek:
- add USB RX aggregation to improve performance
- add USB TX flow control by tracking in-flight URBs
- Cellular:
- IPA v5.2 support"
* tag 'net-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1561 commits)
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wireguard: allowedips: remove redundant space
tools: ynl: add sample for wireguard
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
MAINTAINERS: Add netkit selftest files
selftests/net: Add additional test coverage in nk_qlease
selftests/net: Split netdevsim tests from HW tests in nk_qlease
tools/ynl: Make YnlFamily closeable as a context manager
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
net: airoha: Fix VIP configuration for AN7583 SoC
net: caif: clear client service pointer on teardown
net: strparser: fix skb_head leak in strp_abort_strp()
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
selftests/bpf: add test for xdp_master_redirect with bond not up
net, bpf: fix null-ptr-deref in xdp_master_redirect() for down master
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
sctp: disable BH before calling udp_tunnel_xmit_skb()
sctp: fix missing encap_port propagation for GSO fragments
net: airoha: Rely on net_device pointer in ETS callbacks
...
Merge tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Merge tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest updates from Shuah Khan:
- cpu-hotplug: fix to check if cpu hotplug is supported to avoid
test failures when cpu hotplug isn't supported.
- frace: fix to relevant comparisons and path checks in the helper so
it handles those patterns without spurious shell warnings.
- runner.sh: add ktrap support
- tracing: fix to make --logdir option work again
- tracing: fix to check awk supports non POSIX strtonum()
- mqueue: fix incorrectly named settings file to make sure the test
used the correct timeout value
- kselftest:
- fix to treat xpass as successful result
- add ksft_reset_state()
- kselftest_harness:
- validate kselftest exit codes are handled explicitly
- add detection of invalid mixing of kselftest and harness
functionality
- add validation of intermixing of kselftest and harness
functionality
- run_kselftest.sh:
- remove unused $ROOT
- resolve BASE_DIR with pwd -P to avoid dependency on realpath
or readlink commands to generate a physical absolute path for
BASE_DIR
- allow choosing per-test log directory
- preserve subtarget failures in all/install
* tag 'linux_kselftest-next-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Quote check_requires comparisons
selftests: Preserve subtarget failures in all/install
selftests/run_kselftest.sh: Allow choosing per-test log directory
selftests/run_kselftest.sh: Resolve BASE_DIR with pwd -P
selftests/run_kselftest.sh: Remove unused $ROOT
selftests/cpu-hotplug: Fix check for cpu hotplug not supported
selftests/mqueue: Fix incorrectly named file
selftests: Use ktap helpers for runner.sh
selftests: harness: Validate intermixing of kselftest and harness functionality
selftests: harness: Detect illegal mixing of kselftest and harness functionality
selftests: kselftest: Add ksft_reset_state()
selftests: harness: Validate that explicit kselftest exitcodes are handled
selftests: kselftest: Treat xpass as successful result
selftests/tracing: Fix to check awk supports non POSIX strtonum()
selftests/tracing: Fix to make --logdir option work again
Merge tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit tool updates from Shuah Khan:
- terminate kernel under test on SIGINT when it catches SIGINT to make
sure the TTY isn't messed up and terminate the running kernel
- recommend --raw_output=all when KTAP header isn't found in the kernel
output, it's useful to re-run the test with --raw_output=all to find
out the reasons why the test didn't complete.
- skip stty when stdin is not a tty to avoid writing noise to stderr.
- show suites when user runs --list_suites option instead of entire
list of tests to make the output user friendly and concise.
* tag 'linux_kselftest-kunit-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: tool: Terminate kernel under test on SIGINT
kunit: tool: skip stty when stdin is not a tty
kunit: tool: Recommend --raw_output=all if no KTAP found
kunit: Add --list_suites to show suites
Merge tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
Merge tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc
Pull nolibc updates from Thomas Weißschuh:
- Many new features and optimizations to printf()
- Rename non-standard symbols to avoid collisions with application code
- Support for byteswap.h, endian.h, err.h and asprintf()
- 64-bit dev_t
- Smaller cleanups and fixes to the code and build system
* tag 'nolibc-20260412-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/nolibc/linux-nolibc: (61 commits)
selftests/nolibc: use gcc 15
tools/nolibc: support UBSAN on gcc
tools/nolibc: create __nolibc_no_sanitize_ubsan
selftests/nolibc: don't skip tests for unimplemented syscalls anymore
selftests/nolibc: explicitly handle ENOSYS from ptrace()
tools/nolibc: add byteorder conversions
tools/nolibc: add the _syscall() macro
tools/nolibc: move the call to __sysret() into syscall()
tools/nolibc: rename the internal macros used in syscall()
selftests/nolibc: only use libgcc when really necessary
selftests/nolibc: test the memory allocator
tools/nolibc: check for overflow in calloc() without divisions
tools/nolibc: add support for asprintf()
tools/nolibc: use __builtin_offsetof()
tools/nolibc: use makedev() in fstatat()
tools/nolibc: handle all major and minor numbers in makedev() and friends
tools/nolibc: make dev_t 64 bits wide
tools/nolibc: move the logic of makedev() and friends into functions
selftests/nolibc: add a test for stat().st_rdev
selftests/nolibc: add some tests for makedev() and friends
...
* tag 'powerpc-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (47 commits)
mailmap: Add entry for Andrew Donnellan
powerpc32/bpf: fix loading fsession func metadata using PPC_LI32
selftest/bpf: Enable gotox tests for powerpc64
powerpc64/bpf: Add support for indirect jump
selftest/bpf: Enable instruction array test for powerpc
powerpc/bpf: Add support for instruction array
powerpc32/bpf: Add fsession support
powerpc64/bpf: Implement fsession support
selftests/bpf: Enable private stack tests for powerpc64
powerpc64/bpf: Implement JIT support for private stack
powerpc: pci-ioda: Optimize pnv_ioda_pick_m64_pe()
powerpc: pci-ioda: use bitmap_alloc() in pnv_ioda_pick_m64_pe()
powerpc/net: Inline checksum wrappers and convert to scoped user access
powerpc/sstep: Convert to scoped user access
powerpc/align: Convert emulate_spe() to scoped user access
powerpc/ptrace: Convert gpr32_set_common_user() to scoped user access
powerpc/futex: Use masked user access
powerpc/audit: Convert powerpc to AUDIT_ARCH_COMPAT_GENERIC
cpuidle: powerpc: avoid double clear when breaking snooze
powerpc/ps3: spu.c: fix enum and Return kernel-doc warnings
...
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"The biggest changes are MPAM enablement in drivers/resctrl and new PMU
support under drivers/perf.
On the core side, FEAT_LSUI lets futex atomic operations with EL0
permissions, avoiding PAN toggling.
The rest is mostly TLB invalidation refactoring, further generic entry
work, sysreg updates and a few fixes.
Core features:
- Add support for FEAT_LSUI, allowing futex atomic operations without
toggling Privileged Access Never (PAN)
- Further refactor the arm64 exception handling code towards the
generic entry infrastructure
- Optimise __READ_ONCE() with CONFIG_LTO=y and allow alias analysis
through it
Memory management:
- Refactor the arm64 TLB invalidation API and implementation for
better control over barrier placement and level-hinted invalidation
- Enable batched TLB flushes during memory hot-unplug
- Fix rodata=full block mapping support for realm guests (when
BBML2_NOABORT is available)
Perf and PMU:
- Add support for a whole bunch of system PMUs featured in NVIDIA's
Tegra410 SoC (cspmu extensions for the fabric and PCIe, new drivers
for CPU/C2C memory latency PMUs)
- Clean up iomem resource handling in the Arm CMN driver
- Fix signedness handling of AA64DFR0.{PMUVer,PerfMon}
MPAM (Memory Partitioning And Monitoring):
- Add architecture context-switch and hiding of the feature from KVM
- Add interface to allow MPAM to be exposed to user-space using
resctrl
- Add errata workaround for some existing platforms
- Add documentation for using MPAM and what shape of platforms can
use resctrl
Miscellaneous:
- Check DAIF (and PMR, where relevant) at task-switch time
- Skip TFSR_EL1 checks and barriers in synchronous MTE tag check mode
(only relevant to asynchronous or asymmetric tag check modes)
- Remove a duplicate allocation in the kexec code
- Remove redundant save/restore of SCS SP on entry to/from EL0
- Generate the KERNEL_HWCAP_ definitions from the arm64 hwcap
descriptions
- Add kselftest coverage for cmpbr_sigill()
- Update sysreg definitions"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (109 commits)
arm64: rsi: use linear-map alias for realm config buffer
arm64: Kconfig: fix duplicate word in CMDLINE help text
arm64: mte: Skip TFSR_EL1 checks and barriers in synchronous tag check mode
arm64/sysreg: Update ID_AA64SMFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ZFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64FPFR0_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR2_EL1 description to DDI0601 2025-12
arm64/sysreg: Update ID_AA64ISAR0_EL1 description to DDI0601 2025-12
arm64/hwcap: Generate the KERNEL_HWCAP_ definitions for the hwcaps
arm64: kexec: Remove duplicate allocation for trans_pgd
ACPI: AGDI: fix missing newline in error message
arm64: Check DAIF (and PMR) at task-switch time
arm64: entry: Use split preemption logic
arm64: entry: Use irqentry_{enter_from,exit_to}_kernel_mode()
arm64: entry: Consistently prefix arm64-specific wrappers
arm64: entry: Don't preempt with SError or Debug masked
entry: Split preemption from irqentry_exit_to_kernel_mode()
entry: Split kernel mode logic from irqentry_{enter,exit}()
entry: Move irqentry_enter() prototype later
entry: Remove local_irq_{enable,disable}_exit_to_user()
...
Merge tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RAS updates from Borislav Petkov:
- Add new AMD MCA bank names and types to the MCA code, preceded by a
clean up of the relevant places to have them more developer-friendly
(read: sort them alphanumerically and clean up comments) such that
adding new banks is easy
* tag 'ras_core_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mce, EDAC/mce_amd: Add new SMCA bank types
x86/mce, EDAC/mce_amd: Update CS bank type naming
x86/mce, EDAC/mce_amd: Reorder SMCA bank type enums
Merge tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Borislav Petkov:
- amd64_edac: Add support for AMD Zen 3 (family 19h, models 40h–4fh)
- i10nm: Add GNR error information decoder support as an alternative to
the firmware decoder
- versalnet: Restructure the init/teardown logic for correct and more
readable error handling. Also, fix two memory leaks and a resource
leak
- Convert several internal structs to use bounded flex arrays, enabling
the kernel's runtime checker to catch out-of-bounds memory accesses
- Mark various sysfs attribute tables read-only, preventing accidental
modification at runtime
- The usual fixes and cleanups across the subsystem
* tag 'edac_updates_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/mc: Use kzalloc_flex()
EDAC/ie31200: Make rpl_s_cfg static
EDAC/i10nm: Fix spelling mistake "readd" -> "read"
EDAC/versalnet: Fix device_node leak in mc_probe()
EDAC/versalnet: Fix memory leak in remove and probe error paths
EDAC/amd64: Add support for family 19h, models 40h-4fh
EDAC/i10nm: Add driver decoder for Granite Rapids server
EDAC/sb: Use kzalloc_flex()
EDAC/i7core: Use kzalloc_flex()
EDAC/mpc85xx: Constify device sysfs attributes
EDAC/device: Allow addition of const sysfs attributes
EDAC/pci_sysfs: Constify instance sysfs attributes
EDAC/device: Constify info sysfs attributes
EDAC/device: Drop unnecessary and dangerous casts of attributes
EDAC/device: Drop unused macro to_edacdev_attr()
EDAC/altera: Drop unused field eccmgr_sysfs_attr
EDAC/versalnet: Refactor memory controller initialization and cleanup
Merge tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 SEV updates from Borislav Petkov:
- Change the SEV host code handling of when SNP gets enabled in order
to allow the machine to claim SNP-related resources only when SNP
guests are really going to be launched. The user requests this by
loading the ccp module and thus it controls when SNP initialization
is done
So export an API which module code can call and do the necessary SNP
setup only when really needed
- Drop an unnecessary write-back and invalidate operation that was
being performed too early, since the ccp driver already issues its
own at the correct point in the initialization sequence
- Drop the hotplug callbacks for enabling SNP on newly onlined CPUs,
which were both architecturally unsound (the firmware rejects
initialization if any CPU lacks the required configuration) and buggy
(the MFDM SYSCFG MSR bit was not being set)
- Code refactoring and cleanups to accomplish the above
* tag 'x86_sev_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
crypto/ccp: Update HV_FIXED page states to allow freeing of memory
crypto/ccp: Implement SNP x86 shutdown
x86/sev, crypto/ccp: Move HSAVE_PA setup to arch/x86/
x86/sev, crypto/ccp: Move SNP init to ccp driver
x86/sev: Create snp_shutdown()
x86/sev: Create snp_prepare()
x86/sev: Create a function to clear/zero the RMP
x86/sev: Rename SNP_FEATURES_PRESENT to SNP_FEATURES_IMPL
x86/virt/sev: Keep the RMP table bookkeeping area mapped
x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN
x86/virt/sev: Drop support for SNP hotplug
Merge tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 updates from Borislav Petkov:
- Reference the tip tree maintainer handbook directly from the relevant
MAINTAINERS file entries (covering timers, IRQ, locking, scheduling,
perf, x86, and others) so that contributors and tooling can know
where to look
- Enable interrupt remapping in defconfig, which is an architectural
requirement for x2APIC to function correctly on bare metal. Without
it, x2APIC was effectively enabled but non-functional.
- Ensure that drivers which register custom restart handlers (such as
those needed for SoC-based x86 devices like Intel Lightning Mountain)
are actually invoked during reboot, bringing x86 in line with how
other architectures handle this.
- Cleanups
* tag 'x86_misc_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add references to tip tree handbook
x86/64/defconfig: Add CONFIG_IRQ_REMAP
x86/reboot: Execute the kernel restart handler upon machine restart
x86/mtrr: Use kstrtoul() in parse_mtrr_spare_reg()
Merge tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 microcode loading updates from Borislav Petkov:
"The kernel carries a table of Intel CPUs family, model, stepping, etc
tuples which say what is the latest microcode for that particular CPU.
Some CPU variants differ only by the platform ID which determines what
microcode needs to be loaded on them.
Carve out the platform ID handling from the microcode loader and make it
available in a more generic place so that the old microcode
verification machinery can use it"
* tag 'x86_microcode_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode: Add platform mask to Intel microcode "old" list
x86/cpu: Add platform ID to CPU matching structure
x86/cpu: Add platform ID to CPU info structure
x86/microcode: Refactor platform ID enumeration into a helper
Merge tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 FRED updates from Borislav Petkov:
"We made the FRED support an opt-in initially out of fear of it
breaking machines left and right in the case of a hw bug in the first
generation of machines supporting it.
Now that that the FRED code has seen a lot of hammering, flip the
logic to be opt-out as is the usual case with new hw features"
* tag 'x86_fred_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fred: Remove kernel log message when initializing exceptions
x86/fred: Enable FRED by default
Merge tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 resource control updates from Borislav Petkov:
- Add return value descriptions to several internal functions,
addressing kernel-doc complaints
- Add the x86 maintainer mailing list to the resctrl section so they
are automatically included in patch submissions, and reference the
applicable contribution rules document
- Allow users to apply a single Capacity Bitmask to all cache domains
at once using '*' as a shorthand, instead of having to specify each
domain individually. This is particularly user-friendly on high
core-count systems with many cache clusters
- When a user provides a non-existent domain ID while configuring cache
allocation, ensure the failure reason is properly reported to the
user rather than silently returning an error with a misleading "ok"
status
* tag 'x86_cache_for_v7.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Add missing return value descriptions
MAINTAINERS: Update resctrl entry
fs/resctrl: Add "*" shorthand to set io_alloc CBM for all domains
fs/resctrl: Report invalid domain ID when parsing io_alloc_cbm
Merge tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The only real thing of note here is printing the TDX module version.
This is a little silly on its own, but the upcoming TDX module update
code needs the same TDX module call. This shrinks that set a wee bit.
There's also few minor macro cleanups and a tweak to the GetQuote ABI
to make it easier for userspace to detect zero-length (failed) quotes"
* tag 'x86_tdx_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
virt: tdx-guest: Return error for GetQuote failures
KVM/TDX: Rename KVM_SUPPORTED_TD_ATTRS to KVM_SUPPORTED_TDX_TD_ATTRS
x86/tdx: Rename TDX_ATTR_* to TDX_TD_ATTR_*
KVM/TDX: Remove redundant definitions of TDX_TD_ATTR_*
x86/tdx: Fix the typo in TDX_ATTR_MIGRTABLE
x86/virt/tdx: Print TDX module version during init
x86/virt/tdx: Retrieve TDX module version
Merge tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Dave Hansen:
- Convert x86 code to use generic "pagetable" APIs and ptdescs
This aligns some the set_memory*() code better with the new page
table APIs, especially using ptdescs as opposed to 'struct page'
directly.
* tag 'x86_mm_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/pat: Convert split_large_page() to use ptdescs
x86/mm/pat: Convert populate_pgd() to use page table apis
x86/mm/pat: Convert pmd code to use page table apis
x86/mm/pat: Convert pte code to use page table apis
Merge tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cpu updates from Dave Hansen:
- Complete LASS enabling: deal with vsyscall and EFI
The existing Linear Address Space Separation (LASS) support punted
on support for common EFI and vsyscall configs. Complete the
implementation by supporting EFI and vsyscall=xonly.
- Clean up CPUID usage in newer Intel "avs" audio driver and update the
x86-cpuid-db file
* tag 'x86_cpu_for_7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/x86/kcpuid: Update bitfields to x86-cpuid-db v3.0
ASoC: Intel: avs: Include CPUID header at file scope
ASoC: Intel: avs: Check maximum valid CPUID leaf
x86/cpu: Remove LASS restriction on vsyscall emulation
x86/vsyscall: Disable LASS if vsyscall mode is set to EMULATE
x86/vsyscall: Restore vsyscall=xonly mode under LASS
x86/traps: Consolidate user fixups in the #GP handler
x86/vsyscall: Reorganize the page fault emulation code
x86/cpu: Remove LASS restriction on EFI
x86/efi: Disable LASS while executing runtime services
x86/cpu: Defer LASS enabling until userspace comes up
Merge tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 vdso updates from Ingo Molnar:
"vdso cleanups by Thomas Weißschuh:
- Clean up remnants of VDSO32_NOTE_MASK
- Drop pointless #ifdeffery in vvar_vclock_fault()"
* tag 'x86-vdso-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/vdso: Drop pointless #ifdeffery in vvar_vclock_fault()
x86/vdso: Clean up remnants of VDSO32_NOTE_MASK
Merge tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
- Remove M486/M486SX/ELAN support, first minimal step (Ingo Molnar)
- Print AGESA string from DMI additional information entry (Yazen
Ghannam, Mario Limonciello)
- Improve and fix the DMI code (Mario Limonciello):
- Correct an indexing error in <linux/dmi.h>
- Adjust dmi_decode() to use enums <linux/dmi.h>
- Add pr_fmt() for dmi_scan.c to fix & standardize the log prefixes
* tag 'x86-platform-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Print AGESA string from DMI additional information entry
firmware: dmi: Add pr_fmt() for dmi_scan.c
firmware: dmi: Adjust dmi_decode() to use enums
firmware: dmi: Correct an indexing error in dmi.h
x86/cpu: Remove M486/M486SX/ELAN support
* tag 'x86-cleanups-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Correct the comment explaining what xfeatures_in_use() does
x86/split_lock: Don't warn about unknown split_lock_detect parameter
x86/fpu: Correct misspelled xfeaures_to_write local var
x86/apic: Drop AMD Extended Interrupt LVT macros
x86/cpu/topology: Consolidate AMD and Hygon cases in parse_topology()
block/floppy: Don't use REALLY_SLOW_IO for delays
x86/paravirt: Replace io_delay() hook with a bool
x86/irqflags: Preemptively move include paravirt.h directive where it belongs
x86/split_lock: Restructure the unwieldy switch-case in sld_state_show()
x86/local: Remove trailing semicolon from _ASM_XADD in local_add_return()
x86/asm: Use inout "+" asm onstraint modifiers in __iowrite32_copy()
Merge tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 asm from Ingo Molnar:
"x86 asm cleanups by Uros Bizjak:
- Remove unnecessary memory clobbers from FS/GS base (read-)
accessors and savesegment()
- Use ASM_INPUT_RM in __loadsegment_fs() to work around clang code
generation problems
- Implement loadsegment()/savesegment() macros with static inline
helpers
- Use savesegment() for segment register reads in ELF core dump and
__show_regs()
- Use correct type for 'gs' variable in __show_regs() to avoid
zero-extension
- Clean up 'sel' variable usage in do_set_thread_area()"
* tag 'x86-asm-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/tls: Clean up 'sel' variable usage in do_set_thread_area()
x86/process/32: Use correct type for 'gs' variable in __show_regs() to avoid zero-extension
x86/process/64: Use savesegment() in __show_regs() instead of inline asm
x86/elf: Use savesegment() for segment register reads in ELF core dump
x86/asm/segment: Implement loadsegment()/savesegment() macros with static inline helpers
x86/asm/segment: Use ASM_INPUT_RM in __loadsegment_fs()
x86/asm/segment: Remove unnecessary "memory" clobber from savesegment()
x86/asm/fsgsbase: Remove unnecessary "memory" clobbers from FS/GS base (read-) accessors
Merge tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"Fair scheduling updates:
- Skip SCHED_IDLE rq for SCHED_IDLE tasks (Christian Loehle)
- Remove superfluous rcu_read_lock() in the wakeup path (K Prateek Nayak)
- Simplify the entry condition for update_idle_cpu_scan() (K Prateek Nayak)
- Simplify SIS_UTIL handling in select_idle_cpu() (K Prateek Nayak)
- Avoid overflow in enqueue_entity() (K Prateek Nayak)
- Update overutilized detection (Vincent Guittot)
- Prevent negative lag increase during delayed dequeue (Vincent Guittot)
- Clear buddies for preempt_short (Vincent Guittot)
- Implement more complex proportional newidle balance (Peter Zijlstra)
- Increase weight bits for avg_vruntime (Peter Zijlstra)
- Use full weight to __calc_delta() (Peter Zijlstra)
RT and DL scheduling updates:
- Fix incorrect schedstats for rt and dl thread (Dengjun Su)
- Skip group schedulable check with rt_group_sched=0 (Michal Koutný)
- Move group schedulability check to sched_rt_global_validate()
(Michal Koutný)
- Add reporting of runtime left & abs deadline to sched_getattr()
for DEADLINE tasks (Tommaso Cucinotta)
Scheduling topology updates by K Prateek Nayak:
- Compute sd_weight considering cpuset partitions
- Extract "imb_numa_nr" calculation into a separate helper
- Allocate per-CPU sched_domain_shared in s_data
- Switch to assigning "sd->shared" from s_data
- Remove sched_domain_shared allocation with sd_data
Energy-aware scheduling updates:
- Filter false overloaded_group case for EAS (Vincent Guittot)
- PM: EM: Switch to rcu_dereference_all() in wakeup path
(Dietmar Eggemann)
Infrastructure updates:
- Replace use of system_unbound_wq with system_dfl_wq (Marco Crivellari)
Proxy scheduling updates by John Stultz:
- Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
- Minimise repeated sched_proxy_exec() checking
- Fix potentially missing balancing with Proxy Exec
- Fix and improve task::blocked_on et al handling
- Add assert_balance_callbacks_empty() helper
- Add logic to zap balancing callbacks if we pick again
- Move attach_one_task() and attach_task() helpers to sched.h
- Handle blocked-waiter migration (and return migration)
- Add K Prateek Nayak to scheduler reviewers for proxy execution
Misc cleanups and fixes by John Stultz, Joseph Salisbury, Peter
Zijlstra, K Prateek Nayak, Michal Koutný, Randy Dunlap, Shrikanth
Hegde, Vincent Guittot, Zhan Xusheng, Xie Yuanbin and Vincent Guittot"
* tag 'sched-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
sched/eevdf: Clear buddies for preempt_short
sched/rt: Cleanup global RT bandwidth functions
sched/rt: Move group schedulability check to sched_rt_global_validate()
sched/rt: Skip group schedulable check with rt_group_sched=0
sched/fair: Avoid overflow in enqueue_entity()
sched: Use u64 for bandwidth ratio calculations
sched/fair: Prevent negative lag increase during delayed dequeue
sched/fair: Use sched_energy_enabled()
sched: Handle blocked-waiter migration (and return migration)
sched: Move attach_one_task and attach_task helpers to sched.h
sched: Add logic to zap balance callbacks if we pick again
sched: Add assert_balance_callbacks_empty helper
sched/locking: Add special p->blocked_on==PROXY_WAKING value for proxy return-migration
sched: Fix modifying donor->blocked on without proper locking
locking: Add task::blocked_lock to serialize blocked_on state
sched: Fix potentially missing balancing with Proxy Exec
sched: Minimise repeated sched_proxy_exec() checking
sched: Make class_schedulers avoid pushing current, and get rid of proxy_tag_curr()
MAINTAINERS: Add K Prateek Nayak to scheduler reviewers
sched/core: Get this cpu once in ttwu_queue_cond()
...
Merge tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance events updates from Ingo Molnar:
"Core updates:
- Try to allocate task_ctx_data quickly, to optimize O(N^2) algorithm
on large systems with O(100k) threads (Namhyung Kim)
AMD PMU driver IBS support updates and fixes, by Ravi Bangoria:
- Fix interrupt accounting for discarded samples
- Fix a Zen5-specific quirk
- Fix PhyAddrVal handling
- Fix NMI-safety with perf_allow_kernel()
- Fix a race between event add and NMIs
Intel PMU driver updates:
- Only check GP counters for PEBS constraints validation (Dapeng Mi)
MSR driver:
- Turn SMI_COUNT and PPERF on by default, instead of a long list of
CPU models to enable them on (Kan Liang)
... and misc cleanups and fixes by Aldf Conte, Anshuman Khandual,
Namhyung Kim, Ravi Bangoria and Yen-Hsiang Hsu"
* tag 'perf-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/events: Replace READ_ONCE() with standard pgtable accessors
perf/x86/msr: Make SMI and PPERF on by default
perf/x86/intel/p4: Fix unused variable warning in p4_pmu_init()
perf/x86/intel: Only check GP counters for PEBS constraints validation
perf/x86/amd/ibs: Fix comment typo in ibs_op_data
perf/amd/ibs: Advertise remote socket capability
perf/amd/ibs: Enable streaming store filter
perf/amd/ibs: Enable RIP bit63 hardware filtering
perf/amd/ibs: Enable fetch latency filtering
perf/amd/ibs: Support IBS_{FETCH|OP}_CTL2[Dis] to eliminate RMW race
perf/amd/ibs: Add new MSRs and CPUID bits definitions
perf/amd/ibs: Define macro for ldlat mask and shift
perf/amd/ibs: Avoid race between event add and NMI
perf/amd/ibs: Avoid calling perf_allow_kernel() from the IBS NMI handler
perf/amd/ibs: Preserve PhyAddrVal bit when clearing PhyAddr MSR
perf/amd/ibs: Limit ldlat->l3missonly dependency to Zen5
perf/amd/ibs: Account interrupt for discarded samples
perf/core: Simplify __detach_global_ctx_data()
perf/core: Try to allocate task_ctx_data quickly
perf/core: Pass GFP flags to attach_task_ctx_data()
Merge tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- KLP support updates and fixes (Song Liu)
- KLP-build script updates and fixes (Joe Lawrence)
- Support Clang RAX DRAP sequence, to address clang false positive
(Josh Poimboeuf)
- Reorder ORC register numbering to match regular x86 register
numbering (Josh Poimboeuf)
- Misc cleanups (Wentong Tian, Song Liu)
* tag 'objtool-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool/x86: Reorder ORC register numbering
objtool: Support Clang RAX DRAP sequence
livepatch/klp-build: report patch validation fuzz
livepatch/klp-build: add terminal color output
livepatch/klp-build: provide friendlier error messages
livepatch/klp-build: improve short-circuit validation
livepatch/klp-build: fix shellcheck complaints
livepatch/klp-build: add Makefile with check target
livepatch/klp-build: add grep-override function
livepatch/klp-build: switch to GNU patch and recountdiff
livepatch/klp-build: support patches that add/remove files
objtool/klp: Correlate locals to globals
objtool/klp: Match symbols based on demangled_name for global variables
objtool/klp: Remove .llvm suffix in demangle_name()
objtool/klp: Also demangle global objects
objtool/klp: Use sym->demangled_name for symbol_name hash
objtool/klp: Remove trailing '_' in demangle_name()
objtool/klp: Remove redundant strcmp() in correlate_symbols()
objtool: Use section/symbol type helpers
Miscellaneous fixes and cleanups by Peter Zijlstra, Randy Dunlap,
Thomas Weißschuh, Davidlohr Bueso and Mikhail Gavrilov"
* tag 'locking-core-2026-04-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
compiler: Simplify generic RELOC_HIDE()
locking: Add lock context annotations in the spinlock implementation
locking: Add lock context support in do_raw_{read,write}_trylock()
locking: Fix rwlock support in <linux/spinlock_up.h>
lockdep: Raise default stack trace limits when KASAN is enabled
cleanup: Optimize guards
jump_label: remove workaround for old compilers in initializations
jump_label: use ATOMIC_INIT() for initialization of .enabled
futex: Convert to compiler context analysis
locking/rwsem: Fix logic error in rwsem_del_waiter()
locking/rwsem: Add context analysis
locking/rtmutex: Add context analysis
locking/mutex: Add context analysis
compiler-context-analysys: Add __cond_releases()
locking/mutex: Remove the list_head from struct mutex
locking/semaphore: Remove the list_head from struct semaphore
locking/rwsem: Remove the list_head from struct rw_semaphore
rust: atomic: Update a safety comment in impl of `fetch_add()`
rust: sync: atomic: Update documentation for `fetch_add()`
rust: sync: atomic: Add fetch_sub()
...
Merge in late fixes in preparation for the net-next PR.
Conflicts:
include/net/sch_generic.h a6bd339dbb351 ("net_sched: fix skb memory leak in deferred qdisc drops") ff2998f29f390 ("net: sched: introduce qdisc-specific drop reason tracing")
https://lore.kernel.org/adz0iX85FHMz0HdO@sirena.org.uk
drivers/net/ethernet/airoha/airoha_eth.c 1acdfbdb516b ("net: airoha: Fix VIP configuration for AN7583 SoC") bf3471e6e6c0 ("net: airoha: Make flow control source port mapping dependent on nbq parameter")
Adjacent changes:
drivers/net/ethernet/airoha/airoha_ppe.c f44218cd5e6a ("net: airoha: Reset PPE cpu port configuration in airoha_ppe_hw_init()") 7da62262ec96 ("inet: add ip_local_port_step_width sysctl to improve port usage distribution")
net: pse-pd: fix kernel-doc function name for pse_control_find_by_id()
The kernel-doc comment header incorrectly referenced the function
name pse_control_find_net_by_id() instead of the actual function name
pse_control_find_by_id(). Correct the function name in the documentation
to match the implementation.
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
Reported-by: syzbot+f2fbf7478a35a94c8b7c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?id=cb64c22a492202ca929e18262fdb8cb89e635c70 Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] Fixes: 900575aa33a3 ("wireguard: device: avoid circular netns references") Cc: stable@vger.kernel.org Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-5-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fushuai Wang [Tue, 14 Apr 2026 15:39:41 +0000 (17:39 +0200)]
wireguard: allowedips: Use kfree_rcu() instead of call_rcu()
Replace call_rcu() + kmem_cache_free() with kfree_rcu() to simplify
the code and reduce function size.
Signed-off-by: Fushuai Wang <wangfushuai@baidu.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Link: https://patch.msgid.link/20260414153944.2742252-2-Jason@zx2c4.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull SMP core updates from Thomas Gleixner:
- Switch smp_call_on_cpu() to user system_percpu_wq instead of
system_wq a part of the ongoing workqueue restructuring
- Improve the CSD-lock diagnostics for smp_call_function_single() to
provide better debug mechanisms on weakly ordered systems.
- Cache the current CPU number once in smp_call_function*() instead of
retrieving it over and over.
- Add missing kernel-doc comments all over the place
* tag 'smp-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smp: Use system_percpu_wq instead of system_wq
smp: Improve smp_call_function_single() CSD-lock diagnostics
smp: Get this_cpu once in smp_call_function
smp: Add missing kernel-doc comments
Merge tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso updates from Thomas Gleixner:
- Make the handling of compat functions consistent and more robust
- Rework the underlying data store so that it is dynamically allocated,
which allows the conversion of the last holdout SPARC64 to the
generic VDSO implementation
- Rework the SPARC64 VDSO to utilize the generic implementation
- Mop up the left overs of the non-generic VDSO support in the core
code
- Expand the VDSO selftest and make them more robust
- Allow time namespaces to be enabled independently of the generic VDSO
support, which was not possible before due to SPARC64 not using it
- Various cleanups and improvements in the related code
* tag 'timers-vdso-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
timens: Use task_lock guard in timens_get*()
timens: Use mutex guard in proc_timens_set_offset()
timens: Simplify some calls to put_time_ns()
timens: Add a __free() wrapper for put_time_ns()
timens: Remove dependency on the vDSO
vdso/timens: Move functions to new file
selftests: vDSO: vdso_test_correctness: Add a test for time()
selftests: vDSO: vdso_test_correctness: Use facilities from parse_vdso.c
selftests: vDSO: vdso_test_correctness: Handle different tv_usec types
selftests: vDSO: vdso_test_correctness: Drop SYS_getcpu fallbacks
selftests: vDSO: vdso_test_gettimeofday: Remove nolibc checks
Revert "selftests: vDSO: parse_vdso: Use UAPI headers instead of libc headers"
random: vDSO: Remove ifdeffery
random: vDSO: Trim vDSO includes
vdso/datapage: Trim down unnecessary includes
vdso/datapage: Remove inclusion of gettimeofday.h
vdso/helpers: Explicitly include vdso/processor.h
vdso/gettimeofday: Add explicit includes
random: vDSO: Add explicit includes
MIPS: vdso: Explicitly include asm/vdso/vdso.h
...
Merge tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer core updates from Thomas Gleixner:
- A rework of the hrtimer subsystem to reduce the overhead for
frequently armed timers, especially the hrtick scheduler timer:
- Better timer locality decision
- Simplification of the evaluation of the first expiry time by
keeping track of the neighbor timers in the RB-tree by providing
a RB-tree variant with neighbor links. That avoids walking the
RB-tree on removal to find the next expiry time, but even more
important allows to quickly evaluate whether a timer which is
rearmed changes the position in the RB-tree with the modified
expiry time or not. If not, the dequeue/enqueue sequence which
both can end up in rebalancing can be completely avoided.
- Deferred reprogramming of the underlying clock event device. This
optimizes for the situation where a hrtimer callback sets the
need resched bit. In that case the code attempts to defer the
re-programming of the clock event device up to the point where
the scheduler has picked the next task and has the next hrtick
timer armed. In case that there is no immediate reschedule or
soft interrupts have to be handled before reaching the reschedule
point in the interrupt entry code the clock event is reprogrammed
in one of those code paths to prevent that the timer becomes
stale.
- Support for clocksource coupled clockevents
The TSC deadline timer is coupled to the TSC. The next event is
programmed in TSC time. Currently this is done by converting the
CLOCK_MONOTONIC based expiry value into a relative timeout,
converting it into TSC ticks, reading the TSC adding the delta
ticks and writing the deadline MSR.
As the timekeeping core has the conversion factors for the TSC
already, the whole back and forth conversion can be completely
avoided. The timekeeping core calculates the reverse conversion
factors from nanoseconds to TSC ticks and utilizes the base
timestamps of TSC and CLOCK_MONOTONIC which are updated once per
tick. This allows a direct conversion into the TSC deadline value
without reading the time and as a bonus keeps the deadline
conversion in sync with the TSC conversion factors, which are
updated by adjtimex() on systems with NTP/PTP enabled.
- Allow inlining of the clocksource read and clockevent write
functions when they are tiny enough, e.g. on x86 RDTSC and WRMSR.
With all those enhancements in place a hrtick enabled scheduler
provides the same performance as without hrtick. But also other
hrtimer users obviously benefit from these optimizations.
- Robustness improvements and cleanups of historical sins in the
hrtimer and timekeeping code.
- Rewrite of the clocksource watchdog.
The clocksource watchdog code has over time reached the state of an
impenetrable maze of duct tape and staples. The original design,
which was made in the context of systems far smaller than today, is
based on the assumption that the to be monitored clocksource (TSC)
can be trivially compared against a known to be stable clocksource
(HPET/ACPI-PM timer).
Over the years this rather naive approach turned out to have major
flaws. Long delays between the watchdog invocations can cause wrap
arounds of the reference clocksource. The access to the reference
clocksource degrades on large multi-sockets systems dure to
interconnect congestion. This has been addressed with various
heuristics which degraded the accuracy of the watchdog to the point
that it fails to detect actual TSC problems on older hardware which
exposes slow inter CPU drifts due to firmware manipulating the TSC to
hide SMI time.
The rewrite addresses this by:
- Restricting the validation against the reference clocksource to
the boot CPU which is usually closest to the legacy block which
contains the reference clocksource (HPET/ACPI-PM).
- Do a round robin validation betwen the boot CPU and the other
CPUs based only on the TSC with an algorithm similar to the TSC
synchronization code during CPU hotplug.
- Being more leniant versus remote timeouts
- The usual tiny fixes, cleanups and enhancements all over the place
* tag 'timers-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
alarmtimer: Access timerqueue node under lock in suspend
hrtimer: Fix incorrect #endif comment for BITS_PER_LONG check
posix-timers: Fix stale function name in comment
timers: Get this_cpu once while clearing the idle state
clocksource: Rewrite watchdog code completely
clocksource: Don't use non-continuous clocksources as watchdog
x86/tsc: Handle CLOCK_SOURCE_VALID_FOR_HRES correctly
MIPS: Don't select CLOCKSOURCE_WATCHDOG
parisc: Remove unused clocksource flags
hrtimer: Add a helper to retrieve a hrtimer from its timerqueue node
hrtimer: Remove trailing comma after HRTIMER_MAX_CLOCK_BASES
hrtimer: Mark index and clockid of clock base as const
hrtimer: Drop unnecessary pointer indirection in hrtimer_expire_entry event
hrtimer: Drop spurious space in 'enum hrtimer_base_type'
hrtimer: Don't zero-initialize ret in hrtimer_nanosleep()
hrtimer: Remove hrtimer_get_expires_ns()
timekeeping: Mark offsets array as const
timekeeping/auxclock: Consistently use raw timekeeper for tk_setup_internals()
timer_list: Print offset as signed integer
tracing: Use explicit array size instead of sentinel elements in symbol printing
...
Merge tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull MSI interrupt update from Thomas Gleixner:
"A small update for the MSI interrupt library to check for callers
which fail to provide the mandatory irq_write_msi_msg() callback,
which prevents a NULL pointer dereference later"
* tag 'irq-msi-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/msi-lib: Refuse initialization when irq_write_msi_msg() is missing
Merge tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull interrupt chip driver updates from Thomas Gleixner:
- A large refactoring for the Renesas RZV2H driver to add new interrupt
types cleanly
- A large refactoring for the Renesas RZG2L driver to add support the
new RZ/G3L variant
- Add support for the new NXP S32N79 chip in the IMX irq-steer driver
- Add support for the Apple AICv3 variant
- Enhance the Loongson PCH LPC driver so it can be used on MIPS with
device tree firmware
- Allow the PIC32 EVIC driver to be built independent of MIPS in
compile tests
- The usual small fixes and enhancements all over the place
* tag 'irq-drivers-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (46 commits)
irqchip/irq-pic32-evic: Add __maybe_unused for board_bind_eic_interrupt in COMPILE_TEST
irqchip/renesas-rzv2h: Kill icu_err string
irqchip/renesas-rzv2h: Kill swint_names[]
irqchip/renesas-rzv2h: Kill swint_idx[]
irqchip/renesas-rzg2l: Add NMI support
irqchip/renesas-rzg2l: Clear the shared interrupt bit in rzg2l_irqc_free()
irqchip/renesas-rzg2l: Replace raw_spin_{lock,unlock} with guard() in rzg2l_irq_set_type()
irqchip/gic-v3: Print a warning for out-of-range interrupt numbers
irqchip/renesas-rzg2l: Add shared interrupt support
irqchip/renesas-rzg2l: Add RZ/G3L support
irqchip/renesas-rzg2l: Drop IRQC_IRQ_COUNT macro
irqchip/renesas-rzg2l: Drop IRQC_TINT_START macro
irqchip/renesas-rzg2l: Drop IRQC_NUM_IRQ macro
irqchip/renesas-rzg2l: Dynamically allocate fwspec array
irqchip/renesas-rzg2l: Split rzfive_irqc_{mask,unmask} into separate IRQ and TINT handlers
irqchip/renesas-rzg2l: Split rzfive_tint_irq_endisable() into separate IRQ and TINT helpers
irqchip/renesas-rzg2l: Replace rzg2l_irqc_irq_{enable,disable} with TINT-specific handlers
irqchip/renesas-rzg2l: Split set_type handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Split EOI handler into separate IRQ and TINT functions
irqchip/renesas-rzg2l: Replace single irq_chip with per-region irq_chip instances
...
Merge tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core irq updates from Thomas Gleixner:
- Invoke add_interrupt_randomness() in handle_percpu_devid_irq() and
cleanup the workaround in the Hyper-V driver, which would now invoke
it twice on ARM64. Removing it from the driver requires to add it to
the x86 system vector entry point
- Remove the pointles cpu_read_lock() around reading CPU possible mask,
which is read only after init
- Add documentation for the interaction between device tree bindings
and the interrupt type defines in irq.h
- Delete stale defines in the matrix allocator and the equivalent in
loongarch
* tag 'irq-core-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Drivers: hv: Move add_interrupt_randomness() to hypervisor callback sysvec
genirq/chip: Invoke add_interrupt_randomness() in handle_percpu_devid_irq()
genirq/affinity: Remove cpus_read_lock() while reading cpu_possible_mask
genirq/matrix, LoongArch: Delete IRQ_MATRIX_BITS leftovers
genirq: Document interaction between <linux/irq.h> and DT binding defines
Merge tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code update from Thomas Gleixner:
"A trivial update for the entry code adding missing kernel
documentation for function arguments"
* tag 'core-entry-2026-04-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Add missing kernel-doc for arch_ptrace_report_syscall functions
Merge tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull Kbuild/Kconfig updates from Nicolas Schier:
"Kbuild:
- reject unexpected values for LLVM=
- uapi: remove usage of toolchain headers
- switch from '-fms-extensions' to '-fms-anonymous-structs' when
available (currently: clang >= 23.0.0)
- reduce the number of compiler-generated suffixes for clang thin-lto
build
- reduce output spam ("GEN Makefile") when building out of tree
- improve portability for testing headers
- also test UAPI headers against C++ compilers
- drop build ID architecture allow-list in vdso_install
- only run checksyscalls when necessary
- update the debug information notes in reproducible-builds.rst
- expand inlining hints with -fdiagnostics-show-inlining-chain
Kconfig:
- forbid multiple entries with the same symbol in a choice
- error out on duplicated kconfig inclusion"
* tag 'kbuild-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (35 commits)
kbuild: expand inlining hints with -fdiagnostics-show-inlining-chain
kconfig: forbid multiple entries with the same symbol in a choice
Documentation: kbuild: Update the debug information notes in reproducible-builds.rst
checksyscalls: move instance functionality into generic code
checksyscalls: only run when necessary
checksyscalls: fail on all intermediate errors
checksyscalls: move path to reference table to a variable
kbuild: vdso_install: drop build ID architecture allow-list
kbuild: vdso_install: gracefully handle images without build ID
kbuild: vdso_install: hide readelf warnings
kbuild: vdso_install: split out the readelf invocation
kbuild: uapi: also test UAPI headers against C++ compilers
kbuild: uapi: provide a C++ compatible dummy definition of NULL
kbuild: uapi: handle UML in architecture-specific exclusion lists
kbuild: uapi: move all include path flags together
kbuild: uapi: move some compiler arguments out of the command definition
check-uapi: use dummy libc includes
check-uapi: honor ${CROSS_COMPILE} setting
check-uapi: link into shared objects
kbuild: reduce output spam when building out of tree
...
Merge tag 'bitmap-for-v7.1' of https://github.com/norov/linux
Pull bitmap updates from Yury Norov:
- new API: bitmap_weight_from() and bitmap_weighted_xor() (Yury)
- drop unused __find_nth_andnot_bit() (Yury)
- new tests and test improvements (Andy, Akinobu, Yury)
- fixes for count_zeroes API (Yury)
- cleanup bitmap_print_to_pagebuf() mess (Yury)
- documentation updates (Andy, Kai, Kit).
* tag 'bitmap-for-v7.1' of https://github.com/norov/linux: (24 commits)
bitops: Update kernel-doc for sign_extendXX()
powerpc/xive: simplify xive_spapr_debug_show()
thermal: intel: switch cpumask_get() to using cpumask_print_to_pagebuf()
coresight: don't use bitmap_print_to_pagebuf()
lib/prime_numbers: drop temporary buffer in dump_primes()
drm/xe: switch xe_pagefault_queue_init() to using bitmap_weighted_or()
ice: use bitmap_empty() in ice_vf_has_no_qs_ena
ice: use bitmap_weighted_xor() in ice_find_free_recp_res_idx()
bitmap: introduce bitmap_weighted_xor()
bitmap: add test_zero_nbits()
bitmap: exclude nbits == 0 cases from bitmap test
bitmap: test bitmap_weight() for more
asm-generic/bitops: Fix a comment typo in instrumented-atomic.h
bitops: fix kernel-doc parameter name for parity8()
lib: count_zeros: unify count_{leading,trailing}_zeros()
lib: count_zeros: fix 32/64-bit inconsistency in count_trailing_zeros()
lib: crypto: fix comments for count_leading_zeros()
x86/topology: use bitmap_weight_from()
bitmap: add bitmap_weight_from()
lib/find_bit_benchmark: avoid clearing randomly filled bitmap in test_find_first_bit()
...
Merge tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux
Pull documentation updates from Jonathan Corbet:
"A busier cycle than I had expected for docs, including:
- Translations: some overdue updates to the Japanese translations,
Chinese translations for some of the Rust documentation, and the
beginnings of a Portuguese translation.
- New documents covering CPU isolation, managed interrupts, debugging
Python gbb scripts, and more.
- More tooling work from Mauro, reducing docs-build warnings, adding
self tests, improving man-page output, bringing in a proper C
tokenizer to replace (some of) the mess of kernel-doc regexes, and
more.
- Update and synchronize changes.rst and scripts/ver_linux, and put
both into alphabetical order.
... and a long list of documentation updates, typo fixes, and general
improvements"
* tag 'docs-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (162 commits)
Documentation: core-api: real-time: correct spelling
doc: Add CPU Isolation documentation
Documentation: Add managed interrupts
Documentation: seq_file: drop 2.6 reference
docs/zh_CN: update rust/index.rst translation
docs/zh_CN: update rust/quick-start.rst translation
docs/zh_CN: update rust/coding-guidelines.rst translation
docs/zh_CN: update rust/arch-support.rst translation
docs/zh_CN: sync process/2.Process.rst with English version
docs/zh_CN: fix an inconsistent statement in dev-tools/testing-overview
tracing: Documentation: Update histogram-design.rst for fn() handling
docs: sysctl: Add documentation for /proc/sys/xen/
Docs: hid: intel-ish-hid: make long URL usable
Documentation/kernel-parameters: fix architecture alignment for pt, nopt, and nobypass
sched/doc: Update yield_task description in sched-design-CFS
Documentation/rtla: Convert links to RST format
docs: fix typos and duplicated words across documentation
docs: fix typo in zoran driver documentation
docs: add an Assisted-by mention to submitting-patches.rst
Revert "scripts/checkpatch: add Assisted-by: tag validation"
...
====================
Follow-ups to nk_qlease net selftests
This is a set of follow-ups addressing [0]:
- Split netdevsim tests from HW tests in nk_qlease and move the SW
tests under selftests/net/
- Remove multiple ksft_run()s to fix the recently enforced hard-fail
- Move all the setup inside the test cases for the ones under
selftests/net/ (I'll defer the HW ones to David)
- Add more test coverage related to queue leasing behavior and corner
cases, so now we have 45 tests in nk_qlease.py with netdevsim
which does not need special HW
====================
Daniel Borkmann [Mon, 13 Apr 2026 22:08:06 +0000 (00:08 +0200)]
selftests/net: Add additional test coverage in nk_qlease
Add further netkit queue-lease coverage for netns lifecycle of the guest
and physical halves, channel resize across active leases, single-device
and multi-lessee scenarios, L3 mode operation, lease capacity exhaustion,
and corner-cases of e.g. queue-create rejection paths. Also make the tests
more robust by removing the time.sleep(0.1) after netns deletion and turn
them into a wait loop.
Full test run:
# ./nk_qlease.py
TAP version 13
1..45
ok 1 nk_qlease.test_remove_phys
ok 2 nk_qlease.test_double_lease
ok 3 nk_qlease.test_virtual_lessor
ok 4 nk_qlease.test_phys_lessee
ok 5 nk_qlease.test_different_lessors
ok 6 nk_qlease.test_queue_out_of_range
ok 7 nk_qlease.test_resize_leased
ok 8 nk_qlease.test_self_lease
ok 9 nk_qlease.test_create_tx_type
ok 10 nk_qlease.test_create_primary
ok 11 nk_qlease.test_create_limit
ok 12 nk_qlease.test_link_flap_phys
ok 13 nk_qlease.test_queue_get_virtual
ok 14 nk_qlease.test_remove_virt_first
ok 15 nk_qlease.test_multiple_leases
ok 16 nk_qlease.test_lease_queue_tx_type
ok 17 nk_qlease.test_invalid_netns
ok 18 nk_qlease.test_invalid_phys_ifindex
ok 19 nk_qlease.test_multi_netkit_remove_phys
ok 20 nk_qlease.test_single_remove_phys
ok 21 nk_qlease.test_link_flap_virt
ok 22 nk_qlease.test_phys_queue_no_lease
ok 23 nk_qlease.test_same_ns_lease
ok 24 nk_qlease.test_resize_after_unlease
ok 25 nk_qlease.test_lease_queue_zero
ok 26 nk_qlease.test_release_and_reuse
ok 27 nk_qlease.test_veth_queue_create
ok 28 nk_qlease.test_two_netkits_same_queue
ok 29 nk_qlease.test_l3_mode_lease
ok 30 nk_qlease.test_single_double_lease
ok 31 nk_qlease.test_single_different_lessors
ok 32 nk_qlease.test_cross_ns_netns_id
ok 33 nk_qlease.test_delete_guest_netns
ok 34 nk_qlease.test_move_guest_netns
ok 35 nk_qlease.test_resize_phys_no_reduction
ok 36 nk_qlease.test_delete_one_netkit_of_two
ok 37 nk_qlease.test_bind_rx_leased_phys_queue
ok 38 nk_qlease.test_resize_phys_shrink_past_leased
ok 39 nk_qlease.test_resize_virt_not_supported
ok 40 nk_qlease.test_lease_devices_down
ok 41 nk_qlease.test_lease_capacity_exhaustion
ok 42 nk_qlease.test_resize_phys_up
ok 43 nk_qlease.test_multi_ns_lease
ok 44 nk_qlease.test_multi_ns_delete_one
ok 45 nk_qlease.test_move_phys_netns
# Totals: pass:45 fail:0 xfail:0 xpass:0 skip:0 error:0
Daniel Borkmann [Mon, 13 Apr 2026 22:08:04 +0000 (00:08 +0200)]
tools/ynl: Make YnlFamily closeable as a context manager
YnlFamily opens an AF_NETLINK socket in __init__ but has no way
to release it other than leaving it to the GC. YnlFamily holds a
self reference cycle through SpecFamily's self.family = self
in its super().__init__() call, so refcount GC cannot reclaim
it and the socket stays open until the cyclic GC runs.
If a test creates a guest netns, instantiates a YnlFamily inside
it via NetNSEnter(), performs some test case work via Ynl, and
then deletes the netns, then the 'ip netns del' only drops the
mount binding and cleanup_net in the kernel never runs, so any
subsequent test case assertions that objects got cleaned up would
fail given this only gets triggered later via cyclic GC run.
Add an explicit close() that closes the netlink socket and wire
up the __enter__/__exit__ so callers can scope the instance
deterministically via 'with YnlFamily(...) as ynl: ...'.
Lorenzo Bianconi [Sun, 12 Apr 2026 08:43:26 +0000 (10:43 +0200)]
net: airoha: Add missing PPE configurations in airoha_ppe_hw_init()
Add the following PPE configuration in airoha_ppe_hw_init routine:
- 6RD hw offloading is currently not supported by Netfilter flowtable.
Disable explicitly PPE 6RD offloading in order to prevent PPE to learn
6RD flows and eventually interrupt the traffic.
- Add missing PPE bind rate configuration for L3 and L2 traffic.
PPE bind rate configuration specifies the pps threshold to move a PPE
entry state from UNBIND to BIND. Without this configuration this value
is random.
- Set ageing thresholds to the values used in the vendor SDK in order to
improve connection stability under load and avoid packet loss caused by
fast aging.
Lorenzo Bianconi [Sun, 12 Apr 2026 07:57:29 +0000 (09:57 +0200)]
net: airoha: Fix VIP configuration for AN7583 SoC
EN7581 and AN7583 SoCs have different VIP definitions. Introduce
get_vip_port callback in airoha_eth_soc_data struct in order to take
into account EN7581 and AN7583 VIP register layout and definition
differences.
Introduce nbq parameter in airoha_gdm_port struct. At the moment nbq
is set statically to value previously used in airhoha_set_gdm2_loopback
routine and it will be read from device tree in subsequent patches.
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless.
Fixes: 43e369210108 ("caif: Move refcount from service layer to sock and dev.") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Ren Wei <enjou1224z@gmail.com> Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/9f3d37847c0037568aae698ca23cd47c6691acb0.1775897577.git.zcliangcn@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: strparser: fix skb_head leak in strp_abort_strp()
When the stream parser is aborted, for example after a message assembly timeout,
it can still hold a reference to a partially assembled message in
strp->skb_head.
That skb is not released in strp_abort_strp(), which leaks the partially
assembled message and can be triggered repeatedly to exhaust memory.
Fix this by freeing strp->skb_head and resetting the parser state in the
abort path. Leave strp_stop() unchanged so final cleanup still happens in
strp_done() after the work and timer have been synchronized.
Fixes: 43a0c6751a32 ("strparser: Stream parser for messages") Cc: stable@kernel.org Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Co-developed-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Yuan Tan <yuantan098@gmail.com> Suggested-by: Xin Liu <bird@lzu.edu.cn> Tested-by: Yuan Tan <yuantan098@gmail.com> Signed-off-by: Luxiao Xu <rakukuip@gmail.com> Signed-off-by: Ren Wei <n05ec@lzu.edu.cn> Link: https://patch.msgid.link/ade3857a9404999ce9a1c27ec523efc896072678.1775482694.git.rakukuip@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
net: usb: cdc-phonet: fix skb frags[] overflow in rx_complete()
A malicious USB device claiming to be a CDC Phonet modem can overflow
the skb_shared_info->frags[] array by sending an unbounded sequence of
full-page bulk transfers.
Drop the skb and increment the length error when the frag limit is
reached. This matches the same fix that commit f0813bcd2d9d ("net:
wwan: t7xx: fix potential skb->frags overflow in RX path") did for the
t7xx driver.
Cc: Andrew Lunn <andrew+netdev@lunn.ch> Cc: "David S. Miller" <davem@davemloft.net> Cc: Eric Dumazet <edumazet@google.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Paolo Abeni <pabeni@redhat.com> Cc: stable <stable@kernel.org> Assisted-by: gregkh_clanker_t1000 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://patch.msgid.link/2026041134-dreamboat-buddhism-d1ec@gregkh Fixes: 87cf65601e17 ("USB host CDC Phonet network interface driver") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
====================
net,bpf: fix null-ptr-deref in xdp_master_redirect() for bonding and add selftest
From: Jiayuan Chen <jiayuan.chen@shopee.com>
This series has gone through several rounds of discussion and the
maintainers hold different views on where the fix should live (in the
generic xdp_master_redirect() path vs. inside bonding). I respect all
of the suggestions, but I would like to get the crash fixed first, so
this version takes the approach of checking whether the master device
is up in xdp_master_redirect(), as suggested by Daniel Borkmann. If a
different shape is preferred later it can be done as a follow-up, but
the null-ptr-deref should not linger.
syzkaller reported a kernel panic, full decoded trace here:
https://syzkaller.appspot.com/bug?extid=80e046b8da2820b6ba73
Problem Description
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter without a NULL
check. rr_tx_counter is a per-CPU counter that bonding only allocates
in bond_open() when the mode is round-robin. If the bond device was
never brought up, rr_tx_counter stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Solution
Patch 1: Fix this in the generic xdp_master_redirect() by skipping
master interception when the master device is not running. Returning
XDP_TX keeps the original XDP_TX behaviour on the receiving slave, and
avoids calling into any master ->ndo_xdp_get_xmit_slave() on a device
that has not fully initialized its XDP state. This is not specific to
bonding: any current or future master that defers XDP state allocation
to ->ndo_open() is protected.
Patch 2: Add a selftest that reproduces the above scenario.
selftests/bpf: add test for xdp_master_redirect with bond not up
Add a selftest that reproduces the null-ptr-deref in
bond_rr_gen_slave_id() when XDP redirect targets a bond device in
round-robin mode that was never brought up. The test verifies the fix
by ensuring no crash occurs.
Test setup:
- bond0: active-backup mode, UP, with native XDP (enables
bpf_master_redirect_enabled_key globally)
- bond1: round-robin mode, never UP
- veth1: slave of bond1, with generic XDP (XDP_TX)
- BPF_PROG_TEST_RUN with live frames triggers the redirect path
bond_rr_gen_slave_id() dereferences bond->rr_tx_counter, a per-CPU
counter that bonding only allocates in bond_open() when the mode is
round-robin. If the bond device was never brought up, rr_tx_counter
stays NULL.
The XDP redirect path can still reach that code on a bond that was
never opened: bpf_master_redirect_enabled_key is a global static key,
so as soon as any bond device has native XDP attached, the
XDP_TX -> xdp_master_redirect() interception is enabled for every
slave system-wide. The path xdp_master_redirect() ->
bond_xdp_get_xmit_slave() -> bond_xdp_xmit_roundrobin_slave_get() ->
bond_rr_gen_slave_id() then runs against a bond that has no
rr_tx_counter and crashes.
Fix this in the generic xdp_master_redirect() by refusing to call into
the master's ->ndo_xdp_get_xmit_slave() when the master device is not
up. IFF_UP is only set after ->ndo_open() has successfully returned,
so this reliably excludes masters whose XDP state has not been fully
initialized. Drop the frame with XDP_ABORTED so the exception is
visible via trace_xdp_exception() rather than silently falling through.
This is not specific to bonding: any current or future master that
defers XDP state allocation to ->ndo_open() is protected.
Fixes: 879af96ffd72 ("net, core: Add support for XDP redirection to slave device") Reported-by: syzbot+80e046b8da2820b6ba73@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/698f84c6.a70a0220.2c38d7.00cc.GAE@google.com/T/ Suggested-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev> Link: https://patch.msgid.link/20260411005524.201200-2-jiayuan.chen@linux.dev Signed-off-by: Paolo Abeni <pabeni@redhat.com>
selftests/namespaces: remove unused utils.h include from listns_efault_test
Remove the inclusion of ../filesystems/utils.h from listns_efault_test.c.
The test doesn't use any symbols from that header. Including it alongside
../pidfd/pidfd.h causes a build failure because both headers define
wait_for_pid() with conflicting linkage:
../filesystems/utils.h: extern int wait_for_pid(pid_t pid);
../pidfd/pidfd.h: static inline int wait_for_pid(pid_t pid)
All symbols the test actually uses (create_child, read_nointr,
write_nointr, sys_pidfd_send_signal) come from pidfd.h.
selftests/fsmount_ns: add missing TARGETS and fix cap test
Add missing top-level kselftest TARGETS entries for empty_mntns and
fsmount_ns so that 'make kselftest' discovers and runs these tests.
Fix requires_cap_sys_admin test which always SKIPped because fsopen()
was called after enter_userns(), where CAP_SYS_ADMIN in the mount
namespace's user_ns is unavailable. Move fsopen/fsconfig before fork so
the configured fs_fd is inherited by the child, which then only needs to
call fsmount() after dropping privileges.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Signed-off-by: Christian Brauner <brauner@kernel.org>
empty_mntns.h includes ../statmount/statmount.h which provides a
4-argument statmount_alloc(mnt_id, mnt_ns_id, mask, flags), but then
redefines its own 3-argument version without the flags parameter. This
causes a build failure due to conflicting types.
Remove the duplicate definition from empty_mntns.h and update all
callers to pass 0 for the flags argument.
Fixes: 32f54f2bbccf ("selftests/filesystems: add tests for empty mount namespaces") Signed-off-by: Christian Brauner <brauner@kernel.org>
Remove the local static wait_for_pid() definition from
statmount_test_ns.c as it conflicts with the extern declaration in
utils.h. The identical function is already provided by utils.c.
Fixes: 3ac7ea91f3d0 ("selftests: add FSMOUNT_NAMESPACE tests") Cc: <stable@kernel.org> # mainline only Signed-off-by: Christian Brauner <brauner@kernel.org>
In the OPEN_TREE_NAMESPACE path vfs_open_tree() resolves a path via
filename_lookup() without holding namespace_lock. Between the lookup
and create_new_namespace() acquiring namespace_lock via
LOCK_MOUNT_EXACT_COPY() another thread can unmount the mount, setting
mnt->mnt_ns to NULL.
When create_new_namespace() then checks !mnt->mnt_ns it incorrectly
takes the swap-and-mntget path that was designed for fsmount()'s
detached mounts. This reuses a mount whose mnt_mp_list is in an
inconsistent state from the concurrent unmount, causing a general
protection fault in __umount_mnt() -> hlist_del_init(&mnt->mnt_mp_list)
during namespace teardown.
Remove the !mnt->mnt_ns special case entirely. Instead, always
duplicate the mount:
- For OPEN_TREE_NAMESPACE use __do_loopback() which will properly
clone the mount or reject it via may_copy_tree() if it was
unmounted in the race window.
- For fsmount() use clone_mnt() directly (via the new MOUNT_COPY_NEW
flag) since the mount is freshly created by vfs_create_mount() and
not in any namespace so __do_loopback()'s IS_MNT_UNBINDABLE,
may_copy_tree, and __has_locked_children checks don't apply.
Reported-by: syzbot+e4470cc28308f2081ec8@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
Merge tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull power sequencing updates from Bartosz Golaszewski:
"For this release we have an extension of the pwrseq-pcie-m2 driver
with support for PCIe M.2 Key E connectors.
The rest of the commits fulfill a supporting role: document the
hardware in DT bindings, provide required serdev helpers (this has
been provided in an immutable branch to Rob Herring so you may see it
in his PR as well) and is followed up by some Kconfig fixes from Arnd.
Summary:
- add support for the PCIe M.2 Key E connectors in pwrseq-pcie-m2
- describe PCIe M.2 Mechanical Key E connectors in DT bindings
- add serdev helpers for looking up devices by OF nodes
- minor serdev core rework to enable support for PCIe M.2 Key E
connectors"
* tag 'pwrseq-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
power: sequencing: pcie-m2: add SERIAL_DEV_BUS dependency
power: sequencing: pcie-m2: enforce PCI and OF dependencies
power: sequencing: pcie-m2: Create serdev device for WCN7850 bluetooth
power: sequencing: pcie-m2: Add support for PCIe M.2 Key E connectors
dt-bindings: connector: Add PCIe M.2 Mechanical Key E connector
dt-bindings: serial: Document the graph port
serdev: Do not return -ENODEV from of_serdev_register_devices() if external connector is used
serdev: Add an API to find the serdev controller associated with the devicetree node
serdev: Convert to_serdev_*() helpers to macros and use container_of_const()
Merge tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"For this merge window we have two new drivers: support for
GPIO-signalled ACPI events on Intel platforms and a generic
GPIO-over-pinctrl driver using the ARM SCMI protocol for
controlling pins.
Several things have been reworked in GPIO core: we unduplicated GPIO
hog handling, reduced the number of SRCU locks and dereferences,
improved support for software-node-based lookup and removed more
legacy code after converting remaining users to modern alternatives.
There's also a number of driver reworks and refactoring, documentation
updates, some bug-fixes and new tests.
GPIO core:
- defer probe on software node lookups when the remote software node
exists but has not been registered as a firmware node yet
- unify GPIO hog handling by moving code duplicated in OF and ACPI
modules into GPIO core and allow setting up hogs with software
nodes
- allow matching GPIO controllers by secondary firmware node if
matching by primary does not succeed
- demote deferral warnings to debug level as they are quite normal
when using software nodes which don't support fw_devlink yet
- disable the legacy GPIO character device uAPI v1 supprt in Kconfig
by default
- rework several core functions in preparation for the upcoming
Revocable helper library for protecting resources against sudden
removal, this reduces the number of SRCU dereferences in GPIO core
- simplify file descriptor logic in GPIO character device code by
using FD_PREPARE()
- introduce a header defining symbols used by both GPIO consumers and
providers to avoid having to include provider-specific headers from
drivers which only consume GPIOs
- replace snprintf() with strscpy() where formatting is not required
New drivers:
- add the gpio-by-pinctrl generic driver using the ARM SCMI protocol
to control GPIOs (along with SCMI changes pulled from the pinctrl
tree)
- add a driver providing support for handling of platform events via
GPIO-signalled ACPI events (used on Intel Nova Lake and later
platforms)
Driver changes:
- extend the gpio-kempld driver with support for more recent models,
interrupts and setting/getting multiple values at once
- improve interrupt handling in gpio-brcmstb
- add support for multi-SoC systems in gpio-tegra186
- make sure we return correct values from the .get() callbacks in
several GPIO drivers by normalizing any values other than 0, 1 or
negative error numbers
- use flexible arrays in several drivers to reduce the number of
required memory allocations
- simplify synchronous waiting for virtual drivers to probe and
remove the dedicated, a bit overengineered helper library
dev-sync-probe
- remove unneeded Kconfig dependencies on OF_GPIO in several drivers
and subsystems
- convert the two remaining users of of_get_named_gpio() to using
GPIO descriptors and remove the (no longer used) function along
with the header that declares it
- add missing includes in gpio-mmio
- shrink and simplify code in gpio-max732x by using guard(mutex)
- remove duplicated code handling the 'ngpios' property from
gpio-ts4800, it's already handled in GPIO core
- use correct variable type in gpio-aspeed
- add support for a new model in gpio-realtek-otto
- allow to specify the active-low setting of simulated hogs over the
configfs interface (in addition to existing devicetree support) in
gpio-sim
Bug fixes:
- clear the OF_POPULATED flag on hog nodes in GPIO chip remove path
on OF systems
- fix resource leaks in error path in gpiochip_add_data_with_key()
- drop redundant device reference in gpio-mpsse
Tests:
- add selftests for use-after-free cases in GPIO character device
code
DT bindings:
- add a DT binding document for SCMI based, gpio-over-pinctrl devices
- fix interrupt description in microchip,mpfs-gpio
- add new compatible for gpio-realtek-otto
- describe the resets of the mpfs-gpio controller
- fix maintainer's email in gpio-delay bindings
- remove the binding document for cavium,thunder-8890 as the
corresponding device is bound over PCI and not firmware nodes
Documentation:
- update the recommended way of converting legacy boards to using
software nodes for GPIO description
- describe GPIO line value semantics
- misc updates to kerneldocs
Misc:
- convert OMAP1 ams-delta board to using GPIO hogs described with
software nodes"
* tag 'gpio-updates-for-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (79 commits)
gpio: swnode: defer probe on references to unregistered software nodes
dt-bindings: gpio: cavium,thunder-8890: Remove DT binding
Documentation: gpio: update the preferred method for using software node lookup
gpio: gpio-by-pinctrl: s/used to do/is used to do/
gpio: aspeed: fix unsigned long int declaration
gpio: rockchip: convert to dynamic GPIO base allocation
gpio: remove dev-sync-probe
gpio: virtuser: stop using dev-sync-probe
gpio: aggregator: stop using dev-sync-probe
gpio: sim: stop using dev-sync-probe
gpio: Add Intel Nova Lake ACPI GPIO events driver
gpiolib: Make deferral warnings debug messages
gpiolib: fix hogs with multiple lines
gpio: fix up CONFIG_OF dependencies
gpio: gpio-by-pinctrl: add pinctrl based generic GPIO driver
gpio: dt-bindings: Add GPIO on top of generic pin control
firmware: arm_scmi: Allow PINCTRL_REQUEST to return EOPNOTSUPP
pinctrl: scmi: ignore PIN_CONFIG_PERSIST_STATE
pinctrl: scmi: Delete PIN_CONFIG_OUTPUT_IMPEDANCE_OHMS support
pinctrl: scmi: Add SCMI_PIN_INPUT_VALUE
...
Merge tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control updates from Rafael Wysocki:
"These include thermal core fixes and simplifications, driver fixes and
new hardware support (SDM670, Eliza SoC), new driver features (hwmon
support in imx91, DDR data rate on Nova Lake in int340x), and a
handful of cleanups:
- Fix thermal core issues related to thermal zone removal and
registration errors that may lead to a use-after-free or a memory
leak in some cases (Rafael Wysocki)
- Drop a redundant check from thermal_zone_device_update(), adjust
thermal workqueue allocation flags, and switch over thermal_class
allocation to static (Rafael Wysocki)
- Relocate the suspend and resume of thermal zones closer to the
suspend and resume of devices, respectively (Rafael Wysocki)
- Remove a pointless variable used in the thermal core when
registering a cooling device (Daniel Lezcano)
- Replace sprintf() in thermal_bind_cdev_to_trip() and use
str_enabled_disabled() helper in mode_show() (Thorsten Blum)
- Replace cpumask_weight() in intel_hfi_offline() with
cpumask_empty() which is generally more efficient (Yury Norov)
- Add support for reading DDR data rate from PCI config space on Nova
Lake platforms to the int340x thermal driver (Srinivas Pandruvada)
- Add an OF node address to output message to make sensor names more
distinguishable (Alexander Stein)
- Add hwmon support for the i.MX97 thermal sensor (Alexander Stein)
- Clamp correctly the results when doing value/temperature conversion
in the Spreadtrum driver (Thorsten Blum)
- Add SDM670 compatible DT bindings for the Tsens and the lMH thermal
drivers (Richard Acayan)
- Add SM8750 compatible DT bindings for the Tsens thermal driver
(Manaf Meethalavalappu Pallikunhi)
- Add Eliza SoC compatible DT bindings for the Tsens driver
(Krzysztof Kozlowski)
- Fix inverted condition check on error in the Spear thermal control
driver (Gopi Krishna Menon)
- Use max() macro to increase readability in the Broadcom STB thermal
sensor (Thorsten Blum)
- Remove a stale @trim_offset kernel-doc entry (John Madieu)"
* tag 'thermal-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
thermal: renesas: rzg3e: Remove stale @trim_offset kernel-doc entry
thermal: core: Suspend thermal zones later and resume them earlier
thermal: core: Allocate thermal_class statically
thermal: core: Adjust thermal_wq allocation flags
thermal: core: Drop redundant check from thermal_zone_device_update()
thermal: core: Free thermal zone ID later during removal
thermal: core: Fix thermal zone governor cleanup issues
thermal/core: Remove pointless variable when registering a cooling device
thermal/drivers/brcmstb_thermal: Use max to simplify brcmstb_get_temp
dt-bindings: thermal: st,thermal-spear1340: convert to dtschema
thermal/drivers/spear: Fix error condition for reading st,thermal-flags
dt-bindings: thermal: qcom-tsens: Add Eliza SoC TSENS
thermal: devfreq_cooling: avoid unnecessary kfree of freq_table
thermal: intel: hfi: use cpumask_empty() in intel_hfi_offline()
thermal: sysfs: Use str_enabled_disabled() helper in mode_show()
dt-bindings: thermal: qcom-tsens: Document the SM8750 Temperature Sensor
thermal/drivers/sprd: Use min instead of clamp in sprd_thm_temp_to_rawdata
dt-bindings: thermal: lmh: Add SDM670 compatible
dt-bindings: thermal: tsens: add SDM670 compatible
thermal/drivers/sprd: Fix raw temperature clamping in sprd_thm_rawdata_to_temp
...
Merge tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"Once again, cpufreq is the most active development area, mostly
because of the new feature additions and documentation updates in the
amd-pstate driver, but there are also changes in the cpufreq core
related to boost support and other assorted updates elsewhere.
Next up are power capping changes due to the major cleanup of the
Intel RAPL driver.
On the cpuidle front, a new C-states table for Intel Panther Lake is
added to the intel_idle driver, the stopped tick handling in the menu
and teo governors is updated, and there are a couple of cleanups.
Apart from the above, support for Tegra114 is added to devfreq and
there are assorted cleanups of that code, there are also two updates
of the operating performance points (OPP) library, two minor updates
related to hibernation, and cpupower utility man pages updates and
cleanups.
Specifics:
- Update qcom-hw DT bindings to include Eliza hardware (Abel Vesa)
- Minor updates to driver and dt-bindings for Tegra (Thierry Reding,
Rosen Penev)
- Add MAINTAINERS entry for CPPC driver (Viresh Kumar)
- Add support for new features: CPPC performance priority, Dynamic
EPP, Raw EPP, and new unit tests for them to amd-pstate (Gautham
Shenoy, Mario Limonciello)
- Fix sysfs files being present when HW missing and broken/outdated
documentation in the amd-pstate driver (Ninad Naik, Gautham Shenoy)
- Pass the policy to cpufreq_driver->adjust_perf() to avoid using
cpufreq_cpu_get() in the .adjust_perf() callback in amd-pstate
which leads to a scheduling-while-atomic bug (K Prateek Nayak)
- Clean up dead code in Kconfig for cpufreq (Julian Braha)
- Remove max_freq_req update for pre-existing cpufreq policy and add
a boost_freq_req QoS request to save the boost constraint instead
of overwriting the last scaling_max_freq constraint (Pierre
Gondois)
- Embed cpufreq QoS freq_req objects in cpufreq policy so they all
are allocated in one go along with the policy to simplify lifetime
rules and avoid error handling issues (Viresh Kumar)
- Use DMI max speed when CPPC is unavailable in the acpi-cpufreq
scaling driver (Henry Tseng)
- Switch policy_is_shared() in cpufreq to using cpumask_nth() instead
of cpumask_weight() because the former is more efficient (Yury
Norov)
- Use sysfs_emit() in sysfs show functions for cpufreq governor
attributes (Thorsten Blum)
- Update intel_pstate to stop returning an error when "off" is
written to its status sysfs attribute while the driver is already
off (Fabio De Francesco)
- Include current frequency in the debug message printed by
__cpufreq_driver_target() (Pengjie Zhang)
- Refine stopped tick handling in the menu cpuidle governor and
rearrange stopped tick handling in the teo cpuidle governor (Rafael
Wysocki)
- Add Panther Lake C-states table to the intel_idle driver (Artem
Bityutskiy)
- Clean up dead dependencies on CPU_IDLE in Kconfig (Julian Braha)
- Simplify cpuidle_register_device() with guard() (Huisong Li)
- Use performance level if available to distinguish between rates in
OPP debugfs (Manivannan Sadhasivam)
- Fix scoped_guard in dev_pm_opp_xlate_required_opp() (Viresh Kumar)
- Return -ENODATA if the snapshot image is not loaded (Alberto
Garcia)
- Remove inclusion of crypto/hash.h from hibernate_64.c on x86 (Eric
Biggers)
- Clean up and rearrange the intel_rapl power capping driver to make
the respective interface drivers (TPMI, MSR, and MMOI) hold their
own settings and primitives and consolidate PL4 and PMU support
flags into rapl_defaults (Kuppuswamy Sathyanarayanan)
- Correct kernel-doc function parameter names in the power capping
core code (Randy Dunlap)
- Remove unneeded casting for HZ_PER_KHZ in devfreq (Andy Shevchenko)
- Use _visible attribute to replace create/remove_sysfs_files() in
devfreq (Pengjie Zhang)
- Add Tegra114 support to activity monitor device in tegra30-devfreq
as a preparation to upcoming EMC controller support (Svyatoslav
Ryhel)
- Fix mistakes in cpupower man pages, add the boost and epp options
to the cpupower-frequency-info man page, and add the perf-bias
option to the cpupower-info man page (Roberto Ricci)
- Remove unnecessary extern declarations from getopt.h in arguments
parsing functions in cpufreq-set, cpuidle-info, cpuidle-set,
cpupower-info, and cpupower-set utilities (Kaushlendra Kumar)"
* tag 'pm-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
cpufreq/amd-pstate: Add POWER_SUPPLY select for dynamic EPP
cpupower: remove extern declarations in cmd functions
cpuidle: Simplify cpuidle_register_device() with guard()
PM / devfreq: tegra30-devfreq: add support for Tegra114
PM / devfreq: use _visible attribute to replace create/remove_sysfs_files()
PM / devfreq: Remove unneeded casting for HZ_PER_KHZ
MAINTAINERS: amd-pstate: Step down as maintainer, add Prateek as reviewer
cpufreq: Pass the policy to cpufreq_driver->adjust_perf()
cpufreq/amd-pstate: Pass the policy to amd_pstate_update()
cpufreq/amd-pstate-ut: Add a unit test for raw EPP
cpufreq/amd-pstate: Add support for raw EPP writes
cpufreq/amd-pstate: Add support for platform profile class
cpufreq/amd-pstate: add kernel command line to override dynamic epp
cpufreq/amd-pstate: Add dynamic energy performance preference
Documentation: amd-pstate: fix dead links in the reference section
cpufreq/amd-pstate: Cache the max frequency in cpudata
Documentation/amd-pstate: Add documentation for amd_pstate_floor_{freq,count}
Documentation/amd-pstate: List amd_pstate_prefcore_ranking sysfs file
Documentation/amd-pstate: List amd_pstate_hw_prefcore sysfs file
amd-pstate-ut: Add a testcase to validate the visibility of driver attributes
...
Merge tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI support updates from Rafael Wysocki:
"These include an update of the CMOS RTC driver and the related ACPI
and x86 code that, among other things, switches it over to using the
platform device interface for device binding on x86 instead of the PNP
device driver interface (which allows the code in question to be
simplified quite a bit), a major update of the ACPI Time and Alarm
Device (TAD) driver adding an RTC class device interface to it, and
updates of core ACPI drivers that remove some unnecessary and not
really useful code from them.
Apart from that, two drivers are converted to using the platform
driver interface for device binding instead of the ACPI driver one,
which is slated for removal, support for the Performance Limited
register is added to the ACPI CPPC library and there are some
janitorial updates of it and the related cpufreq CPPC driver, the ACPI
processor driver is fixed and cleaned up, and NVIDIA vendor CPER
record handler is added to the APEI GHES code.
Also, the interface for obtaining a CPU UID from ACPI is consolidated
across architectures and used for fixing a problem with the PCI TPH
Steering Tag on ARM64, there are two updates related to ACPICA, a
minor ACPI OS Services Layer (OSL) update, and a few assorted updates
related to ACPI tables parsing.
Specifics:
- Update maintainers information regarding ACPICA (Rafael Wysocki)
- Replace strncpy() with strscpy_pad() in acpi_ut_safe_strncpy()
(Kees Cook)
- Trigger an ordered system power off after encountering a fatal
error operator in AML (Armin Wolf)
- Enable ACPI FPDT parsing on LoongArch (Xi Ruoyao)
- Remove the temporary stop-gap acpi_pptt_cache_v1_full structure
from the ACPI PPTT parser (Ben Horgan)
- Add support for exposing ACPI FPDT subtables FBPT and S3PT (Nate
DeSimone)
- Address multiple assorted issues and clean up the code in the ACPI
processor idle driver (Huisong Li)
- Replace strlcat() in the ACPI processor idle drive with a better
alternative (Andy Shevchenko)
- Rearrange and clean up acpi_processor_errata_piix4() (Rafael
Wysocki)
- Move reference performance to capabilities and fix an uninitialized
variable in the ACPI CPPC library (Pengjie Zhang)
- Add support for the Performance Limited Register to the ACPI CPPC
library (Sumit Gupta)
- Add cppc_get_perf() API to read performance controls, extend
cppc_set_epp_perf() for FFH/SystemMemory, and make the ACPI CPPC
library warn on missing mandatory DESIRED_PERF register (Sumit
Gupta)
- Modify the cpufreq CPPC driver to update MIN_PERF/MAX_PERF in
target callbacks to allow it to control performance bounds via
standard scaling_min_freq and scaling_max_freq sysfs attributes and
add sysfs documentation for the Performance Limited Register to it
(Sumit Gupta)
- Add ACPI support to the platform device interface in the CMOS RTC
driver, make the ACPI core device enumeration code create a
platform device for the CMOS RTC, and drop CMOS RTC PNP device
support (Rafael Wysocki)
- Consolidate the x86-specific CMOS RTC handling with the ACPI TAD
driver and clean up the CMOS RTC ACPI address space handler (Rafael
Wysocki)
- Enable ACPI alarm in the CMOS RTC driver if advertised in ACPI FADT
and allow that driver to work without a dedicated IRQ if the ACPI
alarm is used (Rafael Wysocki)
- Clean up the ACPI TAD driver in various ways and add an RTC class
device interface, including both the RTC setting/reading and alarm
timer support, to it (Rafael Wysocki)
- Clean up the ACPI AC and ACPI PAD (processor aggregator device)
drivers (Rafael Wysocki)
- Rework checking for duplicate video bus devices and consolidate
pnp.bus_id workarounds handling in the ACPI video bus driver
(Rafael Wysocki)
- Update the ACPI core device drivers to stop setting
acpi_device_name() unnecessarily (Rafael Wysocki)
- Rearrange code using acpi_device_class() in the ACPI core device
drivers and update them to stop setting acpi_device_class()
unnecessarily (Rafael Wysocki)
- Define ACPI_AC_CLASS in one place (Rafael Wysocki)
- Convert the ni903x_wdt watchdog driver and the xen ACPI PAD driver
to bind to platform devices instead of ACPI devices (Rafael
Wysocki)
- Add devm_ghes_register_vendor_record_notifier(), use it in the PCI
hisi driver, and Add NVIDIA vendor CPER record handler (Kai-Heng
Feng)
- Consolidate the interface for obtaining a CPU UID from ACPI across
architectures and use it to address incorrect PCI TPH Steering Tag
on ARM64 resulting from the invalid assumption that the ACPI
Processor UID would always be the same as the corresponding logical
CPU ID in Linux (Chengwen Feng)"
* tag 'acpi-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (73 commits)
ACPICA: Update maintainers information
watchdog: ni903x_wdt: Convert to a platform driver
ACPI: PAD: xen: Convert to a platform driver
ACPI: processor: idle: Reset cpuidle on C-state list changes
cpuidle: Extract and export no-lock variants of cpuidle_unregister_device()
PCI/TPH: Pass ACPI Processor UID to Cache Locality _DSM
ACPI: PPTT: Use acpi_get_cpu_uid() and remove get_acpi_id_for_cpu()
perf: arm_cspmu: Switch to acpi_get_cpu_uid() from get_acpi_id_for_cpu()
ACPI: Centralize acpi_get_cpu_uid() declaration in include/linux/acpi.h
x86/acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
RISC-V: ACPI: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
LoongArch: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
arm64: acpi: Add acpi_get_cpu_uid() for unified ACPI CPU UID retrieval
ACPI: APEI: GHES: Add NVIDIA vendor CPER record handler
PCI: hisi: Use devm_ghes_register_vendor_record_notifier()
ACPI: APEI: GHES: Add devm_ghes_register_vendor_record_notifier()
ACPI: tables: Enable FPDT on LoongArch
ACPI: processor: idle: Fix NULL pointer dereference in hotplug path
ACPI: processor: idle: Reset power_setup_done flag on initialization failure
ACPI: TAD: Add alarm support to the RTC class device interface
...
Merge tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core updates from Danilo Krummrich:
"debugfs:
- Fix NULL pointer dereference in debugfs_create_str()
- Fix misplaced EXPORT_SYMBOL_GPL for debugfs_create_str()
- Fix soundwire debugfs NULL pointer dereference from uninitialized
firmware_file
device property:
- Make fwnode flags modifications thread safe; widen the field to
unsigned long and use set_bit() / clear_bit() based accessors
- Document how to check for the property presence
devres:
- Separate struct devres_node from its "subclasses" (struct devres,
struct devres_group); give struct devres_node its own release and
free callbacks for per-type dispatch
- Introduce struct devres_action for devres actions, avoiding the
ARCH_DMA_MINALIGN alignment overhead of struct devres
- Export struct devres_node and its init/add/remove/dbginfo
primitives for use by Rust Devres<T>
- Fix missing node debug info in devm_krealloc()
- Use guard(spinlock_irqsave) where applicable; consolidate unlock
paths in devres_release_group()
driver_override:
- Convert PCI, WMI, vdpa, s390/cio, s390/ap, and fsl-mc to the
generic driver_override infrastructure, replacing per-bus
driver_override strings, sysfs attributes, and match logic; fixes a
potential UAF from unsynchronized access to driver_override in bus
match() callbacks
- Simplify __device_set_driver_override() logic
kernfs:
- Send IN_DELETE_SELF and IN_IGNORED inotify events on kernfs file
and directory removal
- Add corresponding selftests for memcg
platform:
- Allow attaching software nodes when creating platform devices via a
new 'swnode' field in struct platform_device_info
- Add kerneldoc for struct platform_device_info
software node:
- Move software node initialization from postcore_initcall() to
driver_init(), making it available early in the boot process
- Move kernel_kobj initialization (ksysfs_init) earlier to support
the above
- Remove software_node_exit(); dead code in a built-in unit
SoC:
- Introduce of_machine_read_compatible() and of_machine_read_model()
OF helpers and export soc_attr_read_machine() to replace direct
accesses to of_root from SoC drivers; also enables
CONFIG_COMPILE_TEST coverage for these drivers
sysfs:
- Constify attribute group array pointers to
'const struct attribute_group *const *' in sysfs functions,
device_add_groups() / device_remove_groups(), and struct class
Rust:
- Devres:
- Embed struct devres_node directly in Devres<T> instead of going
through devm_add_action(), avoiding the extra allocation and the
unnecessary ARCH_DMA_MINALIGN alignment
- I/O:
- Turn IoCapable from a marker trait into a functional trait
carrying the raw I/O accessor implementation (io_read /
io_write), providing working defaults for the per-type Io
methods
- Add RelaxedMmio wrapper type, making relaxed accessors usable in
code generic over the Io trait
- Remove overloaded per-type Io methods and per-backend macros
from Mmio and PCI ConfigSpace
- I/O (Register):
- Add IoLoc trait and generic read/write/update methods to the Io
trait, making I/O operations parameterizable by typed locations
- Add register! macro for defining hardware register types with
typed bitfield accessors backed by Bounded values; supports
direct, relative, and array register addressing
- Add write_reg() / try_write_reg() and LocatedRegister trait
- Update PCI sample driver to demonstrate the register! macro
- IRQ:
- Move 'static bounds from where clauses to trait declarations for
IRQ handler traits
- Misc:
- Enable the generic_arg_infer Rust feature
- Extend Bounded with shift operations, single-bit bool
conversion, and const get()
Misc:
- Make deferred_probe_timeout default a Kconfig option
- Drop auxiliary_dev_pm_ops; the PM core falls back to driver PM
callbacks when no bus type PM ops are set
- Add conditional guard support for device_lock()
- Add ksysfs.c to the DRIVER CORE MAINTAINERS entry
- Fix kernel-doc warnings in base.h
- Fix stale reference to memory_block_add_nid() in documentation"
* tag 'driver-core-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (67 commits)
bus: fsl-mc: use generic driver_override infrastructure
s390/ap: use generic driver_override infrastructure
s390/cio: use generic driver_override infrastructure
vdpa: use generic driver_override infrastructure
platform/wmi: use generic driver_override infrastructure
PCI: use generic driver_override infrastructure
driver core: make software nodes available earlier
software node: remove software_node_exit()
kernel: ksysfs: initialize kernel_kobj earlier
MAINTAINERS: add ksysfs.c to the DRIVER CORE entry
drivers/base/memory: fix stale reference to memory_block_add_nid()
device property: Document how to check for the property presence
soundwire: debugfs: initialize firmware_file to empty string
debugfs: fix placement of EXPORT_SYMBOL_GPL for debugfs_create_str()
debugfs: check for NULL pointer in debugfs_create_str()
driver core: Make deferred_probe_timeout default a Kconfig option
driver core: simplify __device_set_driver_override() clearing logic
driver core: auxiliary bus: Drop auxiliary_dev_pm_ops
device property: Make modifications of fwnode "flags" thread safe
rust: devres: embed struct devres_node directly
...
Merge tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- randomize_kstack: Improve implementation across arches (Ryan Roberts)
- lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
- refcount: Remove unused __signed_wrap function annotations
* tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
refcount: Remove unused __signed_wrap function annotations
randomize_kstack: Unify random source across arches
randomize_kstack: Maintain kstack_offset per task
* tag 'execve-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
sched: update task_struct->comm comment
exec: use strnlen() in __set_task_comm
Merge tag 'pstore-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- fix ftrace dump when ECC is enabled (Andrey Skvortsov)
- fix resource leak when ioremap() fails (Cole Leavitt)
- Remove useless memblock header (Guilherme G. Piccoli)
- Fix ECC parameter help text (Guilherme G. Piccoli)
- Keep ftrace module parameter and debugfs switch in sync (Guilherme G.
Piccoli)
- Factor KASLR offset in the core kernel instruction addresses
(Guilherme G. Piccoli)
* tag 'pstore-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/ftrace: Factor KASLR offset in the core kernel instruction addresses
pstore/ftrace: Keep ftrace module parameter and debugfs switch in sync
pstore/ram: fix resource leak when ioremap() fails
pstore/ramoops: Fix ECC parameter help text
pstore/ramoops: Remove useless memblock header
pstore: fix ftrace dump, when ECC is enabled
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers:
- Several improvements related to crc_kunit, to align with the standard
KUnit conventions and make it easier for developers and CI systems to
run this test suite
- Add an arm64-optimized implementation of CRC64-NVME
- Remove unused code for big endian arm64
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: arm64: Simplify intrinsics implementation
lib/crc: arm64: Use existing macros for kernel-mode FPU cflags
lib/crc: arm64: Drop unnecessary chunking logic from crc64
lib/crc: arm64: Assume a little-endian kernel
lib/crc: arm64: add NEON accelerated CRC64-NVMe implementation
lib/crc: arm64: Drop check for CONFIG_KERNEL_MODE_NEON
crypto: crc32c - Remove another outdated comment
crypto: crc32c - Remove more outdated usage information
kunit: configs: Enable all CRC tests in all_tests.config
lib/crc: tests: Add a .kunitconfig file
lib/crc: tests: Add CRC_ENABLE_ALL_FOR_KUNIT
lib/crc: tests: Make crc_kunit test only the enabled CRC variants
Merge tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull crypto library updates from Eric Biggers:
- Migrate more hash algorithms from the traditional crypto subsystem to
lib/crypto/
Like the algorithms migrated earlier (e.g. SHA-*), this simplifies
the implementations, improves performance, enables further
simplifications in calling code, and solves various other issues:
- AES CBC-based MACs (AES-CMAC, AES-XCBC-MAC, and AES-CBC-MAC)
- Support these algorithms in lib/crypto/ using the AES library
and the existing arm64 assembly code
- Reimplement the traditional crypto API's "cmac(aes)",
"xcbc(aes)", and "cbcmac(aes)" on top of the library
- Convert mac80211 to use the AES-CMAC library. Note: several
other subsystems can use it too and will be converted later
- Drop the broken, nonstandard, and likely unused support for
"xcbc(aes)" with key lengths other than 128 bits
- Enable optimizations by default
- GHASH
- Migrate the standalone GHASH code into lib/crypto/
- Integrate the GHASH code more closely with the very similar
POLYVAL code, and improve the generic GHASH implementation to
resist cache-timing attacks and use much less memory
- Reimplement the AES-GCM library and the "gcm" crypto_aead
template on top of the GHASH library. Remove "ghash" from the
crypto_shash API, as it's no longer needed
- Enable optimizations by default
- SM3
- Migrate the kernel's existing SM3 code into lib/crypto/, and
reimplement the traditional crypto API's "sm3" on top of it
- I don't recommend using SM3, but this cleanup is worthwhile
to organize the code the same way as other algorithms
- Testing improvements:
- Add a KUnit test suite for each of the new library APIs
- Migrate the existing ChaCha20Poly1305 test to KUnit
- Make the KUnit all_tests.config enable all crypto library tests
- Move the test kconfig options to the Runtime Testing menu
- Other updates to arch-optimized crypto code:
- Optimize SHA-256 for Zhaoxin CPUs using the Padlock Hash Engine
- Remove some MD5 implementations that are no longer worth keeping
- Drop big endian and voluntary preemption support from the arm64
code, as those configurations are no longer supported on arm64
- Make jitterentropy and samples/tsm-mr use the crypto library APIs
* tag 'libcrypto-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (66 commits)
lib/crypto: arm64: Assume a little-endian kernel
arm64: fpsimd: Remove obsolete cond_yield macro
lib/crypto: arm64/sha3: Remove obsolete chunking logic
lib/crypto: arm64/sha512: Remove obsolete chunking logic
lib/crypto: arm64/sha256: Remove obsolete chunking logic
lib/crypto: arm64/sha1: Remove obsolete chunking logic
lib/crypto: arm64/poly1305: Remove obsolete chunking logic
lib/crypto: arm64/gf128hash: Remove obsolete chunking logic
lib/crypto: arm64/chacha: Remove obsolete chunking logic
lib/crypto: arm64/aes: Remove obsolete chunking logic
lib/crypto: Include <crypto/utils.h> instead of <crypto/algapi.h>
lib/crypto: aesgcm: Don't disable IRQs during AES block encryption
lib/crypto: aescfb: Don't disable IRQs during AES block encryption
lib/crypto: tests: Migrate ChaCha20Poly1305 self-test to KUnit
lib/crypto: sparc: Drop optimized MD5 code
lib/crypto: mips: Drop optimized MD5 code
lib: Move crypto library tests to Runtime Testing menu
crypto: sm3 - Remove 'struct sm3_state'
crypto: sm3 - Remove the original "sm3_block_generic()"
crypto: sm3 - Remove sm3_base.h
...
Merge tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux
Pull fscrypt updates from Eric Biggers:
- Various cleanups for the interface between fs/crypto/ and
filesystems, from Christoph Hellwig
- Simplify and optimize the implementation of v1 key derivation by
using the AES library instead of the crypto_skcipher API
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: use AES library for v1 key derivation
ext4: use a byte granularity cursor in ext4_mpage_readpages
fscrypt: pass a real sector_t to fscrypt_zeroout_range
fscrypt: pass a byte length to fscrypt_zeroout_range
fscrypt: pass a byte offset to fscrypt_zeroout_range
fscrypt: pass a byte length to fscrypt_zeroout_range_inline_crypt
fscrypt: pass a byte offset to fscrypt_zeroout_range_inline_crypt
fscrypt: pass a byte offset to fscrypt_set_bio_crypt_ctx
fscrypt: pass a byte offset to fscrypt_mergeable_bio
fscrypt: pass a byte offset to fscrypt_generate_dun
fscrypt: move fscrypt_set_bio_crypt_ctx_bh to buffer.c
ext4, fscrypt: merge fscrypt_mergeable_bio_bh into io_submit_need_new_bio
ext4: factor out a io_submit_need_new_bio helper
ext4: open code fscrypt_set_bio_crypt_ctx_bh
ext4: initialize the write hint in io_submit_init_bio
* tag 'v7.1-rc1-part1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: (26 commits)
smb: client: allow both 'lease' and 'nolease' mount options
smb: client: get rid of d_drop()+d_add()
smb: client: set ATTR_TEMPORARY with O_TMPFILE | O_EXCL
smb: client: add support for O_TMPFILE
vfs: introduce d_mark_tmpfile_name()
MAINTAINERS: create entry for smbdirect
smb: client: add missing MODULE_DESCRIPTION() to smb1maperror_test
smb: client: fix OOB reads parsing symlink error response
smb: client: fix off-by-8 bounds check in check_wsl_eas()
smb: client: Remove unnecessary selection of CRYPTO_ECB
smb/client: move smb2maperror declarations to smb2proto.h
smb/client: introduce KUnit tests to check DOS/SRV err mapping search
smb/client: check if SMB1 DOS/SRV error mapping arrays are sorted
smb/client: use binary search for SMB1 DOS/SRV error mapping
smb/client: autogenerate SMB1 DOS/SRV to POSIX error mapping
smb/client: annotate smberr.h with POSIX error codes
smb/client: move ERRnetlogonNotStarted to DOS error class
smb/client: introduce KUnit test to check ntstatus_to_dos_map search
smb/client: check if ntstatus_to_dos_map is sorted
smb/client: use binary search for NT status to DOS mapping
...
Merge tag 'xfs-merge-7.1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Carlos Maiolino:
"There aren't any new features.
The whole series is just a collection of bug fixes and code
refactoring. There is some new information added a couple new
tracepoints, new data added to mountstats, but no big changes"
* tag 'xfs-merge-7.1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (41 commits)
xfs: fix number of GC bvecs
xfs: untangle the open zones reporting in mountinfo
xfs: expose the number of open zones in sysfs
xfs: reduce special casing for the open GC zone
xfs: streamline GC zone selection
xfs: refactor GC zone selection helpers
xfs: rename xfs_zone_gc_iter_next to xfs_zone_gc_iter_irec
xfs: put the open zone later xfs_open_zone_put
xfs: add a separate tracepoint for stealing an open zone for GC
xfs: delay initial open of the GC zone
xfs: fix a resource leak in xfs_alloc_buftarg()
xfs: handle too many open zones when mounting
xfs: refactor xfs_mount_zones
xfs: fix integer overflow in busy extent sort comparator
xfs: fix integer overflow in deferred intent sort comparators
xfs: fold xfs_setattr_size into xfs_vn_setattr_size
xfs: remove a duplicate assert in xfs_setattr_size
xfs: return default quota limits for IDs without a dquot
xfs: start gc on zonegc_low_space attribute updates
xfs: don't decrement the buffer LRU count for in-use buffers
...
Lorenzo Bianconi [Sun, 12 Apr 2026 09:56:25 +0000 (11:56 +0200)]
net: airoha: Remove PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration
PCE_MC_EN_MASK bit in REG_FE_PCE_CFG configuration performed in
airoha_fe_init() is used to duplicate multicast packets and send a copy
to the CPU when the traffic is offloaded. This is necessary just if
it is requested by the user. Disable multicast packets duplication by
default.
Merge tag 'erofs-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
- Validate xattr h_shared_count to report -EFSCORRUPTED explicitly for
crafted images
- Verify metadata accesses for file-backed mounts via rw_verify_area()
- Fix FS_IOC_GETFSLABEL to include the trailing NUL byte, consistent
with ext4 and xfs
- Properly handle 48-bit on-disk blocks/uniaddr for extra devices
- Fix an index underflow in the LZ4 in-place decompression that can
cause out-of-bounds accesses with crafted images
- Minor fixes and cleanups
* tag 'erofs-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: error out obviously illegal extents in advance
erofs: clean up encoded map flags
erofs: fix unsigned underflow in z_erofs_lz4_handle_overlap()
erofs: handle 48-bit blocks/uniaddr for extra devices
erofs: include the trailing NUL in FS_IOC_GETFSLABEL
erofs: ensure all folios are managed in erofs_try_to_free_all_cached_folios()
erofs: verify metadata accesses for file-backed mounts
erofs: harden h_shared_count in erofs_init_inode_xattrs()
Merge tag 'exfat-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Implement FALLOC_FL_ALLOCATE_RANGE to add support for preallocating
clusters without zeroing, helping to reduce file fragmentation
- Add a unified block readahead helper for FAT chain conversion, bitmap
allocation, and directory entry lookups
- Optimize exfat_chain_cont_cluster() by caching buffer heads to
minimize mark_buffer_dirty() and mirroring overhead during
NO_FAT_CHAIN to FAT_CHAIN conversion
- Switch to truncate_inode_pages_final() in evict_inode() to prevent
BUG_ON caused by shadow entries during reclaim
- Fix a 32-bit truncation bug in directory entry calculations by
ensuring proper bitwise coercion
- Fix sb->s_maxbytes calculation to correctly reflect the maximum
possible volume size for a given cluster size, resolving xfstests
generic/213
- Introduced exfat_cluster_walk() helper to traverse FAT chains by a
specified step, handling both ALLOC_NO_FAT_CHAIN and ALLOC_FAT_CHAIN
modes
- Introduced exfat_chain_advance() helper to advance an exfat_chain
structure, updating both the current cluster and remaining size
- Remove dead assignments and fix Smatch warnings
* tag 'exfat-for-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
exfat: use exfat_chain_advance helper
exfat: introduce exfat_chain_advance helper
exfat: remove NULL cache pointer case in exfat_ent_get
exfat: use exfat_cluster_walk helper
exfat: introduce exfat_cluster_walk helper
exfat: fix incorrect directory checksum after rename to shorter name
exfat: fix s_maxbytes
exfat: fix passing zero to ERR_PTR() in exfat_mkdir()
exfat: fix error handling for FAT table operations
exfat: optimize exfat_chain_cont_cluster with cached buffer heads
exfat: drop redundant sec parameter from exfat_mirror_bh
exfat: use readahead helper in exfat_get_dentry
exfat: use readahead helper in exfat_allocate_bitmap
exfat: add block readahead in exfat_chain_cont_cluster
exfat: add fallocate FALLOC_FL_ALLOCATE_RANGE support
exfat: Fix bitwise operation having different size
exfat: Drop dead assignment of num_clusters
exfat: use truncate_inode_pages_final() at evict_inode()
Merge tag 'nilfs2-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2
Pull nilfs2 updates from Viacheslav Dubeyko:
"This contains fixes of syzbot reported issues in NILFS2 functionality:
- The DAT inode's btree node cache (i_assoc_inode) is initialized
lazily during btree operations.
However, nilfs_mdt_save_to_shadow_map() assumes i_assoc_inode is
already initialized when copying dirty pages to the shadow map
during GC. If NILFS_IOCTL_CLEAN_SEGMENTS is called immediately
after mount before any btree operation has occurred on the DAT
inode, i_assoc_inode is NULL leading to a general protection fault.
Fix this by calling nilfs_attach_btree_node_cache() on the DAT
inode in nilfs_dat_read() at mount time, ensuring i_assoc_inode is
always initialized before any GC operation can use it (Deepanshu
Kartikey)
- nilfs_ioctl_mark_blocks_dirty() uses bd_oblocknr to detect dead
blocks by comparing it with the current block number bd_blocknr. If
they differ, the block is considered dead and skipped.
A corrupted ioctl request with bd_oblocknr set to 0 causes the
comparison to incorrectly match when the lookup returns -ENOENT and
sets bd_blocknr to 0, bypassing the dead block check and calling
nilfs_bmap_mark() on a non- existent block. This causes
nilfs_btree_do_lookup() to return -ENOENT, triggering the
WARN_ON(ret == -ENOENT).
Fix this by rejecting ioctl requests with bd_oblocknr set to 0 at
the beginning of each iteration (Deepanshu Kartikey)"
* tag 'nilfs2-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/nilfs2:
nilfs2: reject zero bd_oblocknr in nilfs_ioctl_mark_blocks_dirty()
nilfs2: fix NULL i_assoc_inode dereference in nilfs_mdt_save_to_shadow_map
Merge tag 'hfs-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs
Pull hfsplus updates from Viacheslav Dubeyko:
"This contains several fixes of syzbot reported issues and HFS+ fixes
of xfstests failures.
- Fix a syzbot reported issue of a KMSAN uninit-value in
hfsplus_strcasecmp().
The root cause was that hfs_brec_read() doesn't validate that the
on-disk record size matches the expected size for the record type
being read. The fix introduced hfsplus_brec_read_cat() wrapper that
validates the record size based on the type field and returns -EIO
if size doesn't match (Deepanshu Kartikey)
- Fix a syzbot reported issue of processing corrupted HFS+ images
where the b-tree allocation bitmap indicates that the header node
(Node 0) is free. Node 0 must always be allocated. Violating this
invariant leads to allocator corruption, which cascades into kernel
panics or undefined behavior.
Prevent trusting a corrupted allocator state by adding a validation
check during hfs_btree_open(). If corruption is detected, print a
warning identifying the specific corrupted tree and force the
filesystem to mount read-only (SB_RDONLY).
This prevents kernel panics from corrupted images while enabling
data recovery (Shardul Bankar)
- Fix a potential deadlock in hfsplus_fill_super().
hfsplus_fill_super() calls hfs_find_init() to initialize a search
structure, which acquires tree->tree_lock. If the subsequent call
to hfsplus_cat_build_key() fails, the function jumps to the
out_put_root error label without releasing the lock.
Fix this by adding the missing hfs_find_exit(&fd) call before
jumping to the out_put_root error label. This ensures that
tree->tree_lock is properly released on the error path (Zilin Guan)
- Update a files ctime after rename in hfsplus_rename() (Yangtao Li)
The rest of the patches introduce the HFS+ fixes for the case of
generic/348, generic/728, generic/533, generic/523, and generic/642
test-cases of xfstests suite"
* tag 'hfs-v7.1-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/vdubeyko/hfs:
hfsplus: fix generic/642 failure
hfsplus: rework logic of map nodes creation in xattr b-tree
hfsplus: fix logic of alloc/free b-tree node
hfsplus: fix error processing issue in hfs_bmap_free()
hfsplus: fix potential race conditions in b-tree functionality
hfsplus: extract hidden directory search into a helper function
hfsplus: fix held lock freed on hfsplus_fill_super()
hfsplus: fix generic/523 test-case failure
hfsplus: validate b-tree node 0 bitmap at mount time
hfsplus: refactor b-tree map page access and add node-type validation
hfsplus: fix to update ctime after rename
hfsplus: fix generic/533 test-case failure
hfsplus: set ctime after setxattr and removexattr
hfsplus: fix uninit-value by validating catalog record size
hfsplus: fix potential Allocation File corruption after fsync
Xin Long [Sun, 12 Apr 2026 18:15:27 +0000 (14:15 -0400)]
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
Xin Long [Sun, 12 Apr 2026 18:13:51 +0000 (14:13 -0400)]
sctp: fix missing encap_port propagation for GSO fragments
encap_port in SCTP_INPUT_CB(skb) is used by sctp_vtag_verify() for
SCTP-over-UDP processing. In the GSO case, it is only set on the head
skb, while fragment skbs leave it 0.
This results in fragment skbs seeing encap_port == 0, breaking
SCTP-over-UDP connections.
Fix it by propagating encap_port from the head skb cb when initializing
fragment skbs in sctp_inq_pop().
====================
net: airoha: Preliminary series to support multiple net_devices connected to the same GDM port
EN7581 or AN7583 SoCs support connecting multiple external SerDes (e.g.
Ethernet or USB SerDes) to GDM3 or GDM4 ports via a hw arbiter that
manages the traffic in a TDM manner.
This series introduces some preliminary changes necessary to introduce
support for multiple net_devices connected to the same Frame Engine (FE)
GDM port (GDM3 or GDM4).
====================
Lorenzo Bianconi [Sun, 12 Apr 2026 17:13:14 +0000 (19:13 +0200)]
net: airoha: Rely on net_device pointer in ETS callbacks
Remove airoha_gdm_port dependency in ETS tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Lorenzo Bianconi [Sun, 12 Apr 2026 17:13:13 +0000 (19:13 +0200)]
net: airoha: Rely on net_device pointer in HTB callbacks
Remove airoha_gdm_port dependency in HTB tc callback signatures and rely
on net_device pointer instead. Please note this patch does not introduce
any logical change and it is a preliminary patch in order to support
multiple net_devices connected to the same GDM3 or GDM4 port via an
external hw arbiter.
Lorenzo Bianconi [Sun, 12 Apr 2026 17:13:12 +0000 (19:13 +0200)]
net: airoha: Rely on net_device pointer in airoha_dev_setup_tc_block signature
Remove airoha_gdm_port dependency in airoha_dev_setup_tc_block routine
signature and rely on net_device pointer instead. Please note this patch
does not introduce any logical change and it is a preliminary patch to
support multiple net_devices connected to the GDM3 or GDM4 ports via an
external hw arbiter.
====================
net: dsa: mxl862xx: add statistics support
Add per-port RMON statistics support for the MxL862xx DSA driver,
covering hardware-specific ethtool -S counters, standard IEEE 802.3
MAC/ctrl/pause statistics, and rtnl_link_stats64 via polled 64-bit
accumulation.
====================
Daniel Golle [Sun, 12 Apr 2026 00:02:05 +0000 (01:02 +0100)]
net: dsa: mxl862xx: implement .get_stats64
Poll free-running firmware RMON counters every 2 seconds and accumulate
deltas into 64-bit per-port statistics. 32-bit packet counters wrap
in ~220s at 10 Gbps line rate with minimum-size frames; the 2s polling
interval provides a comfortable margin. The .get_stats64 callback
forces a fresh poll so that counters are always up to date when queried.
Daniel Golle [Sun, 12 Apr 2026 00:01:57 +0000 (01:01 +0100)]
net: dsa: mxl862xx: add ethtool statistics support
The MxL862xx firmware exposes per-port RMON counters through the
RMON_PORT_GET command, covering standard IEEE 802.3 MAC statistics
(unicast/multicast/broadcast packet and byte counts, collision
counters, pause frames) as well as hardware-specific counters such
as extended VLAN discard and MTU exceed events.
Add the RMON counter firmware API structures and command definitions.
Implement .get_strings, .get_sset_count, and .get_ethtool_stats for
legacy ethtool -S support. Implement .get_eth_mac_stats,
.get_eth_ctrl_stats, and .get_pause_stats for the standardized
IEEE 802.3 statistics interface.
Merge tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"User visible changes:
- move shutdown ioctl support out of experimental features, a forced
stop of filesystem operation until the next unmount; additionally
there's a super block operation to forcibly remove a device from
under the filesystem that could lead to a shutdown or not if the
redundancy allows that
- report filesystem shutdown using fserror mechanism
- tree-checker updates:
- verify free space info, extent and bitmap items
- verify remap-tree items and related data in block group items
Performance improvements:
- speed up clearing first extent in the tracked range (+10%
throughput on sample workload)
- reduce COW rewrites of extent buffers during the same transaction
- avoid taking big device lock to update device stats during
transaction commit
- fix unnecessary flush on close when truncating empty files
(observed in practice on a backup application)
- prevent direct reclaim during compressed readahead to avoid stalls
under memory pressure
Notable fixes:
- fix chunk allocation strategy on RAID1-like block groups with
disproportionate device sizes, this could lead to ENOSPC due to
skewed reservation estimates
- adjust metadata reservation overcommit ratio to be less aggressive
and also try to flush if possible, this avoids ENOSPC and potential
transaction aborts in some edge cases (that are otherwise hard to
reproduce)
- fix silent IO error in encoded writes and ordered extent split in
zoned mode, the error was not correctly propagated to the address
space and could lead to zeroed ranges
- don't mark inline files NOCOMPRESS unexpectedly, the intent was to
do that for single block writes of regular files
- fix deadlock between reflink and transaction commit when using
flushoncommit
- fix overly strict item check of a running dev-replace operation
Core:
- zoned mode space reservation fixes:
- cap delayed refs metadata reservation to avoid overcommit
- update logic to reclaim partially unusable zones
- add another state to flush and reclaim partially used zone
- limit number of zones reclaimed in one go to avoid blocking
other operations
- don't let log trees consume global reserve on overcommit and fall
back to transaction commit
- revalidate extent buffer when checking its up-to-date status
- add self tests for zoned mode block group specifics
- reduce atomic allocations in some qgroup paths
- avoid unnecessary root node COW during snapshotting
- start new transaction in block group relocation conditionally
- faster check of NOCOW files on currently snapshotted root
- change how compressed bio size is tracked from bio and reduce the
structure size
* tag 'for-7.1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (116 commits)
btrfs: btrfs_log_dev_io_error() on all bio errors
btrfs: fix silent IO error loss in encoded writes and zoned split
btrfs: skip clearing EXTENT_DEFRAG for NOCOW ordered extents
btrfs: use BTRFS_FS_UPDATE_UUID_TREE_GEN flag for UUID tree rescan check
btrfs: remove duplicate journal_info reset on failure to commit transaction
btrfs: tag as unlikely if statements that check for fs in error state
btrfs: fix double free in create_space_info() error path
btrfs: fix double free in create_space_info_sub_group() error path
btrfs: do not reject a valid running dev-replace
btrfs: only invalidate btree inode pages after all ebs are released
btrfs: prevent direct reclaim during compressed readahead
btrfs: replace BUG_ON() with error return in cache_save_setup()
btrfs: zstd: don't cache sectorsize in a local variable
btrfs: zlib: don't cache sectorsize in a local variable
btrfs: zlib: drop redundant folio address variable
btrfs: lzo: inline read/write length helpers
btrfs: use common eb range validation in read_extent_buffer_to_user_nofault()
btrfs: read eb folio index right before loops
btrfs: rename local variable for offset in folio
btrfs: unify types for binary search variables
...
Merge tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring updates from Jens Axboe:
- Add a callback driven main loop for io_uring, and BPF struct_ops
on top to allow implementing custom event loop logic
- Decouple IOPOLL from being a ring-wide all-or-nothing setting,
allowing IOPOLL use cases to also issue certain white listed
non-polled opcodes
- Timeout improvements. Migrate internal timeout storage from
timespec64 to ktime_t for simpler arithmetic and avoid copying of
timespec data
- Zero-copy receive (zcrx) updates:
- Add a device-less mode (ZCRX_REG_NODEV) for testing and
experimentation where data flows through the copy fallback path
- Fix two-step unregistration regression, DMA length calculations,
xarray mark usage, and a potential 32-bit overflow in id
shifting
- Refactoring toward multi-area support: dedicated refill queue
struct, consolidated DMA syncing, netmem array refilling format,
and guard-based locking
- Zero-copy transmit (zctx) cleanup:
- Unify io_send_zc() and io_sendmsg_zc() into a single function
- Add vectorized registered buffer send for IORING_OP_SEND_ZC
- Add separate notification user_data via sqe->addr3 so
notification and completion CQEs can be distinguished without
extra reference counting
- Switch struct io_ring_ctx internal bitfields to explicit flag bits
with atomic-safe accessors, and annotate the known harmless races on
those flags
- Various optimizations caching ctx and other request fields in local
variables to avoid repeated loads, and cleanups for tctx setup, ring
fd registration, and read path early returns
* tag 'for-7.1/io_uring-20260411' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (58 commits)
io_uring: unify getting ctx from passed in file descriptor
io_uring/register: don't get a reference to the registered ring fd
io_uring/tctx: clean up __io_uring_add_tctx_node() error handling
io_uring/tctx: have io_uring_alloc_task_context() return tctx
io_uring/timeout: use 'ctx' consistently
io_uring/rw: clean up __io_read() obsolete comment and early returns
io_uring/zcrx: use correct mmap off constants
io_uring/zcrx: use dma_len for chunk size calculation
io_uring/zcrx: don't clear not allocated niovs
io_uring/zcrx: don't use mark0 for allocating xarray
io_uring: cast id to u64 before shifting in io_allocate_rbuf_ring()
io_uring/zcrx: reject REG_NODEV with large rx_buf_size
io_uring/cancel: validate opcode for IORING_ASYNC_CANCEL_OP
io_uring/rsrc: use io_cache_free() to free node
io_uring/zcrx: rename zcrx [un]register functions
io_uring/zcrx: check ctrl op payload struct sizes
io_uring/zcrx: cache fallback availability in zcrx ctx
io_uring/zcrx: warn on a repeated area append
io_uring/zcrx: consolidate dma syncing
io_uring/zcrx: netmem array as refiling format
...
projects / thirdparty / kernel / linux.git / log
