Merge tag '9p-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs
Pull 9p fix from Eric Van Hensbergen:
"This contains a single mitigation to help deal with an apparent race
condition between client and server having to deal with inode number
collisions"
* tag '9p-for-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
fs/9p: mitigate inode collisions
Merge tag 'acpi-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix three recent regressions, one introduced while enabling a
new platform firmware feature for power management, and two introduced
by a recent CPPC library update.
Specifics:
- Allow two overlapping Low-Power S0 Idle _DSM function sets to be
used at the same time (Rafael Wysocki)
- Fix bit offset computation in MASK_VAL() macro used for applying a
bitmask to a new CPPC register value (Jarred White)
- Fix access width field usage for PCC registers in CPPC (Vanshidhar
Konda)"
* tag 'acpi-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions
ACPI: CPPC: Fix access width used for PCC registers
ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro
Merge tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Nothing major, regression fixes are mostly in drivers, two more of
those are flowing towards us thru various trees. I wish some of the
changes went into -rc5, we'll try to keep an eye on frequency of PRs
from sub-trees.
Also disproportional number of fixes for bugs added in v6.4, strange
coincidence.
Current release - regressions:
- igc: fix LED-related deadlock on driver unbind
- wifi: mac80211: small fixes to recent clean up of the connection
process
- Revert "wifi: iwlwifi: bump FW API to 90 for BZ/SC devices", kernel
doesn't have all the code to deal with that version, yet
- Bluetooth:
- set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- qca: fix invalid device address check, again
- Bluetooth:
- lots of fixes for the command submission rework from v6.4
- qca: fix NULL-deref on non-serdev suspend
Misc:
- tools: ynl: don't ignore errors in NLMSG_DONE messages"
* tag 'net-6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits)
af_unix: Suppress false-positive lockdep splat for spin_lock() in __unix_gc().
net: b44: set pause params only when interface is up
tls: fix lockless read of strp->msg_ready in ->poll
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
net: ravb: Fix registered interrupt names
octeontx2-af: fix the double free in rvu_npc_freemem()
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
ice: fix LAG and VF lock dependency in ice_reset_vf()
iavf: Fix TC config comparison with existing adapter TC config
i40e: Report MFS in decimal base instead of hex
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
ethernet: Add helper for assigning packet type when dest address does not match device address
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
net: phy: dp83869: Fix MII mode failure
netfilter: nf_tables: honor table dormant flag from netdev release event path
eth: bnxt: fix counting packets discarded due to OOM and netpoll
igc: Fix LED-related deadlock on driver unbind
...
Merge tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Revert some backchannel fixes that went into v6.9-rc
* tag 'nfsd-6.9-5' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
Revert "NFSD: Convert the callback workqueue to use delayed_work"
Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
Merge tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- A couple of i2c-hid fixes (Kenny Levinsen & Nam Cao)
- A config issue with mcp-2221 when CONFIG_IIO is not enabled
(Abdelrahman Morsy)
- A dev_err fix in intel-ish-hid (Zhang Lixu)
- A couple of mouse fixes for both nintendo and Logitech-dj (Nuno
Pereira and Yaraslau Furman)
- I'm changing my main kernel email address as it's way simpler for me
than the Red Hat one (Benjamin Tissoires)
* tag 'for-linus-2024042501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: mcp-2221: cancel delayed_work only when CONFIG_IIO is enabled
HID: logitech-dj: allow mice to use all types of reports
HID: i2c-hid: Revert to await reset ACK before reading report descriptor
HID: nintendo: Fix N64 controller being identified as mouse
MAINTAINERS: update Benjamin's email address
HID: intel-ish-hid: ipc: Fix dev_err usage with uninitialized dev->devc
HID: i2c-hid: remove I2C_HID_READ_PENDING flag to prevent lock-up
Jakub Kicinski [Thu, 25 Apr 2024 15:46:53 +0000 (08:46 -0700)]
Merge tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter/IPVS fixes for net
The following patchset contains two Netfilter/IPVS fixes for net:
Patch #1 fixes SCTP checksumming for IPVS with gso packets,
from Ismael Luceno.
Patch #2 honor dormant flag from netdev event path to fix a possible
double hook unregistration.
* tag 'nf-24-04-25' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: honor table dormant flag from netdev release event path
ipvs: Fix checksumming on GSO of SCTP packets
====================
Peter Münster [Wed, 24 Apr 2024 13:51:52 +0000 (15:51 +0200)]
net: b44: set pause params only when interface is up
b44_free_rings() accesses b44::rx_buffers (and ::tx_buffers)
unconditionally, but b44::rx_buffers is only valid when the
device is up (they get allocated in b44_open(), and deallocated
again in b44_close()), any other time these are just a NULL pointers.
So if you try to change the pause params while the network interface
is disabled/administratively down, everything explodes (which likely
netifd tries to do).
Link: https://github.com/openwrt/openwrt/issues/13789 Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Cc: stable@vger.kernel.org Reported-by: Peter Münster <pm@a16n.net> Suggested-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Vaclav Svoboda <svoboda@neng.cz> Tested-by: Peter Münster <pm@a16n.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Peter Münster <pm@a16n.net> Reviewed-by: Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/87y192oolj.fsf@a16n.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls: fix lockless read of strp->msg_ready in ->poll
tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
dpll: fix dpll_pin_on_pin_register() for multiple parent pins
In scenario where pin is registered with multiple parent pins via
dpll_pin_on_pin_register(..), all belonging to the same dpll device.
A second call to dpll_pin_on_pin_unregister(..) would cause a call trace,
as it tries to use already released registration resources (due to fix
introduced in b446631f355e). In this scenario pin was registered twice,
so resources are not yet expected to be release until each registered
pin/pin pair is unregistered.
Currently, the following crash/call trace is produced when ice driver is
removed on the system with installed E810T NIC which includes dpll device:
Fix by adding a parent pointer as a cookie when creating a registration,
also when searching for it. For the regular pins pass NULL, this allows to
create separated registration for each parent the pin is registered with.
As interrupts are now requested from ravb_probe(), before calling
register_netdev(), ndev->name still contains the template "eth%d",
leading to funny names in /proc/interrupts. E.g. on R-Car E3:
Jason Reeder [Wed, 24 Apr 2024 07:16:26 +0000 (12:46 +0530)]
net: ethernet: ti: am65-cpts: Fix PTPv1 message type on TX packets
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.)
field from the second nibble of the PTP header which is defined in the
PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification
the first two bytes of the PTP header are defined as the versionType
which is always 0x0001. This means that any PTPv1 packets that are
tagged for TX timestamping by the CPTS will have their messageType set
to 0x0 which corresponds to a Sync message type. This causes issues
when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1)
timestamp that never appears.
Fix this by checking if the ptp_class of the timestamped TX packet is
PTP_CLASS_V1 and then matching the PTP sequence ID to the stored
sequence ID in the skb->cb data structure. If the sequence IDs match
and the packet is of type PTPv1 then there is a chance that the
messageType has been incorrectly stored by the CPTS so overwrite the
messageType stored by the CPTS with the messageType from the skb->cb
data structure. This allows the PTPv1 stack to receive TX timestamps
for Delay_Req packets which are necessary to lock onto a PTP Leader.
Signed-off-by: Jason Reeder <jreeder@ti.com> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Tested-by: Ed Trexel <ed.trexel@hp.com> Fixes: f6bd59526ca5 ("net: ethernet: ti: introduce am654 common platform time sync driver") Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload
Some device drivers support devices that enable them to annotate whether a
Rx skb refers to a packet that was processed by the MACsec offloading
functionality of the device. Logic in the Rx handling for MACsec offload
does not utilize this information to preemptively avoid forwarding to the
macsec netdev currently. Because of this, things like multicast messages or
unicast messages with an unmatched destination address such as ARP requests
are forwarded to the macsec netdev whether the message received was MACsec
encrypted or not. The goal of this patch series is to improve the Rx
handling for MACsec offload for devices capable of annotating skbs received
that were decrypted by the NIC offload for MACsec.
Here is a summary of the issue that occurs with the existing logic today.
* The current design of the MACsec offload handling path tries to use
"best guess" mechanisms for determining whether a packet associated
with the currently handled skb in the datapath was processed via HW
offload
* The best guess mechanism uses the following heuristic logic (in order of
precedence)
- Check if header destination MAC address matches MACsec netdev MAC
address -> forward to MACsec port
- Check if packet is multicast traffic -> forward to MACsec port
- MACsec security channel was able to be looked up from skb offload
context (mlx5 only) -> forward to MACsec port
* Problem: plaintext traffic can potentially solicit a MACsec encrypted
response from the offload device
- Core aspect of MACsec is that it identifies unauthorized LAN connections
and excludes them from communication
+ This behavior can be seen when not enabling offload for MACsec
- The offload behavior violates this principle in MACsec
I believe this behavior is a security bug since applications utilizing
MACsec could be exploited using this behavior, and the correct way to
resolve this is by having the hardware correctly indicate whether MACsec
offload occurred for the packet or not. In the patches in this series, I
leave a warning for when the problematic path occurs because I cannot
figure out a secure way to fix the security issue that applies to the core
MACsec offload handling in the Rx path without breaking MACsec offload for
other vendors.
Shown at the bottom is an example use case where plaintext traffic sent to
a physical port of a NIC configured for MACsec offload is unable to be
handled correctly by the software stack when the NIC provides awareness to
the kernel about whether the received packet is MACsec traffic or not. In
this specific example, plaintext ARP requests are being responded with
MACsec encrypted ARP replies (which leads to routing information being
unable to be built for the requester).
Side 1
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.1/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:66
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip macsec add macsec0 rx sci 2 on
ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip address flush macsec0
ip address add 2.2.2.1/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:88
ip address flush macsec_vlan
ip address add 3.3.3.1/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 2
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.2/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:77
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip macsec add macsec0 rx sci 1 on
ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip address flush macsec0
ip address add 2.2.2.2/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:99
ip address flush macsec_vlan
ip address add 3.3.3.2/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 1
ping -I mlx5_1 1.1.1.2
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data.
From 1.1.1.1 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: No route to host
From 1.1.1.1 icmp_seq=2 Destination Host Unreachable
From 1.1.1.1 icmp_seq=3 Destination Host Unreachable
Changes:
v2->v3:
* Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina
Dubroca <sd@queasysnail.net>
v1->v2:
* Fixed series subject to detail the issue being fixed
* Removed strange characters from cover letter
* Added comment in example that illustrates the impact involving
promiscuous mode
* Added patch for generalizing packet type detection
* Added Fixes: tags and targeting net
* Removed pointless warning in the heuristic Rx path for macsec offload
* Applied small refactor in Rx path offload to minimize scope of rx_sc
local variable
Jacob Keller [Tue, 23 Apr 2024 18:27:20 +0000 (11:27 -0700)]
ice: fix LAG and VF lock dependency in ice_reset_vf()
9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock: ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf83 ("ice: Fix VF Reset paths when interface in a failed over aggregate") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Dave Ertman <david.m.ertman@intel.com> Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
iavf: Fix TC config comparison with existing adapter TC config
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
Fixes: d5b33d024496 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com> Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the MFS is set below the default (0x2600), a warning message is
reported like the following :
MFS for port 1 has been set below the default: 600
This message is a bit confusing as the number shown here (600) is in
fact an hexa number: 0x600 = 1536
Without any explicit "0x" prefix, this message is read like the MFS is
set to 600 bytes.
MFS, as per MTUs, are usually expressed in decimal base.
This commit reports both current and default MFS values in decimal
so it's less confusing for end-users.
A typical warning message looks like the following :
MFS for port 1 (1536) has been set below the default (9728)
Signed-off-by: Erwan Velu <e.velu@criteo.com> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Fixes: 3a2c6ced90e1 ("i40e: Add a check to see if MFS is set") Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
i40e: Do not use WQ_MEM_RECLAIM flag for workqueue
Issue reported by customer during SRIOV testing, call trace:
When both i40e and the i40iw driver are loaded, a warning
in check_flush_dependency is being triggered. This seems
to be because of the i40e driver workqueue is allocated with
the WQ_MEM_RECLAIM flag, and the i40iw one is not.
Similar error was encountered on ice too and it was fixed by
removing the flag. Do the same for i40e too.
Dan Carpenter [Tue, 23 Apr 2024 16:15:22 +0000 (19:15 +0300)]
net: ti: icssg-prueth: Fix signedness bug in prueth_init_rx_chns()
The rx_chn->irq[] array is unsigned int but it should be signed for the
error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero
then we should return -ENXIO instead of success.
Fixes: 128d5874c082 ("net: ti: icssg-prueth: Add ICSSG ethernet driver") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Roger Quadros <rogerq@kernel.org> Reviewed-by: MD Danish Anwar <danishanwar@ti.com> Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountain Signed-off-by: Jakub Kicinski <kuba@kernel.org>
net/mlx5e: Advertise mlx5 ethernet driver updates sk_buff md_dst for MACsec
mlx5 Rx flow steering and CQE handling enable the driver to be able to
update an skb's md_dst attribute as MACsec when MACsec traffic arrives when
a device is configured for offloading. Advertise this to the core stack to
take advantage of this capability.
Cc: stable@vger.kernel.org Fixes: b7c9400cbc48 ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com> Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
macsec: Detect if Rx skb is macsec-related for offloading devices that update md_dst
Can now correctly identify where the packets should be delivered by using
md_dst or its absence on devices that provide it.
This detection is not possible without device drivers that update md_dst. A
fallback pattern should be used for supporting such device drivers. This
fallback mode causes multicast messages to be cloned to both the non-macsec
and macsec ports, independent of whether the multicast message received was
encrypted over MACsec or not. Other non-macsec traffic may also fail to be
handled correctly for devices in promiscuous mode.
macsec: Enable devices to advertise whether they update sk_buff md_dst during offloads
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not
without knowing whether the device is able to update this field during an
offload. Assume that an offload to a MACsec device cannot support updating
md_dst by default. Capable devices can advertise that they do indicate that
an skb is related to a MACsec offloaded packet using the md_dst.
David S. Miller [Thu, 25 Apr 2024 11:18:37 +0000 (12:18 +0100)]
Merge tag 'wireless-2024-04-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
Fixes for the current cycle:
* ath11k: convert to correct RCU iteration of IPv6 addresses
* iwlwifi: link ID, FW API version, scanning and PASN fixes
* cfg80211: NULL-deref and tracing fixes
* mac80211: connection mode, mesh fast-TX, multi-link and
various other small fixes
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The DP83869 driver sets the MII bit (needed for PHY to work in MII mode)
only if the op-mode is either DP83869_100M_MEDIA_CONVERT or
DP83869_RGMII_100_BASE.
Some drivers i.e. ICSSG support MII mode with op-mode as
DP83869_RGMII_COPPER_ETHERNET for which the MII bit is not set in dp83869
driver. As a result MII mode on ICSSG doesn't work and below log is seen.
TI DP83869 300b2400.mdio:0f: selected op-mode is not valid with MII mode
icssg-prueth icssg1-eth: couldn't connect to phy ethernet-phy@0
icssg-prueth icssg1-eth: can't phy connect port MII0
Fix this by setting MII bit for DP83869_RGMII_COPPER_ETHERNET op-mode as
well.
Fixes: 94e86ef1b801 ("net: phy: dp83869: support mii mode when rgmii strap cfg is used") Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Thu, 25 Apr 2024 03:29:49 +0000 (20:29 -0700)]
Merge tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
- hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
- qca: fix invalid device address check
- hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
- Fix type of len in {l2cap,sco}_sock_getsockopt_old()
- btusb: mediatek: Fix double free of skb in coredump
- btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
- btusb: Fix triggering coredump implementation for QCA
* tag 'for-net-2024-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Bluetooth: qca: fix NULL-deref on non-serdev setup
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Bluetooth: btusb: mediatek: Fix double free of skb in coredump
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
Bluetooth: qca: fix invalid device address check
Bluetooth: hci_event: Fix sending HCI_OP_READ_ENC_KEY_SIZE
Bluetooth: btusb: Fix triggering coredump implementation for QCA
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
====================
Jakub Kicinski [Wed, 24 Apr 2024 00:21:48 +0000 (17:21 -0700)]
eth: bnxt: fix counting packets discarded due to OOM and netpoll
I added OOM and netpoll discard counters, naively assuming that
the cpr pointer is pointing to a common completion ring.
Turns out that is usually *a* completion ring but not *the*
completion ring which bnapi->cp_ring points to. bnapi->cp_ring
is where the stats are read from, so we end up reporting 0
thru ethtool -S and qstat even though the drop events have happened.
Make 100% sure we're recording statistics in the correct structure.
Roman reports a deadlock on unplug of a Thunderbolt docking station
containing an Intel I225 Ethernet adapter.
The root cause is that led_classdev's for LEDs on the adapter are
registered such that they're device-managed by the netdev. That
results in recursive acquisition of the rtnl_lock() mutex on unplug:
When the driver calls unregister_netdev(), it acquires rtnl_lock(),
then frees the device-managed resources. Upon unregistering the LEDs,
netdev_trig_deactivate() invokes unregister_netdevice_notifier(),
which tries to acquire rtnl_lock() again.
Avoid by using non-device-managed LED registration.
This reverts commit e30cef001da259e8df354b813015d0e5acc08740.
commit 99f4570cfba1 ("clkdev: Update clkdev id usage to allow
for longer names") can fix clk_name exceed MAX_DEV_ID limits,
so this commit is meaningless.
Revert "net: txgbe: fix i2c dev name cannot match clkdev"
This reverts commit c644920ce9220d83e070f575a4df711741c07f07.
when register i2c dev, txgbe shorten "i2c_designware" to "i2c_dw",
will cause this i2c dev can't match platfom driver i2c_designware_platform.
mlxsw: spectrum_acl_tcam: Fix memory leak when canceling rehash work
The rehash delayed work is rescheduled with a delay if the number of
credits at end of the work is not negative as supposedly it means that
the migration ended. Otherwise, it is rescheduled immediately.
After "mlxsw: spectrum_acl_tcam: Fix possible use-after-free during
rehash" the above is no longer accurate as a non-negative number of
credits is no longer indicative of the migration being done. It can also
happen if the work encountered an error in which case the migration will
resume the next time the work is scheduled.
The significance of the above is that it is possible for the work to be
pending and associated with hints that were allocated when the migration
started. This leads to the hints being leaked [1] when the work is
canceled while pending as part of ACL region dismantle.
Fix by freeing the hints if hints are associated with a work that was
canceled while pending.
Blame the original commit since the reliance on not having a pending
work associated with hints is fragile.
mlxsw: spectrum_acl_tcam: Fix incorrect list API usage
Both the function that migrates all the chunks within a region and the
function that migrates all the entries within a chunk call
list_first_entry() on the respective lists without checking that the
lists are not empty. This is incorrect usage of the API, which leads to
the following warning [1].
Fix by returning if the lists are empty as there is nothing to migrate
in this case.
mlxsw: spectrum_acl_tcam: Fix warning during rehash
As previously explained, the rehash delayed work migrates filters from
one region to another. This is done by iterating over all chunks (all
the filters with the same priority) in the region and in each chunk
iterating over all the filters.
When the work runs out of credits it stores the current chunk and entry
as markers in the per-work context so that it would know where to resume
the migration from the next time the work is scheduled.
Upon error, the chunk marker is reset to NULL, but without resetting the
entry markers despite being relative to it. This can result in migration
being resumed from an entry that does not belong to the chunk being
migrated. In turn, this will eventually lead to a chunk being iterated
over as if it is an entry. Because of how the two structures happen to
be defined, this does not lead to KASAN splats, but to warnings such as
[1].
Fix by creating a helper that resets all the markers and call it from
all the places the currently only reset the chunk marker. For good
measures also call it when starting a completely new rehash. Add a
warning to avoid future cases.
mlxsw: spectrum_acl_tcam: Fix memory leak during rehash
The rehash delayed work migrates filters from one region to another.
This is done by iterating over all chunks (all the filters with the same
priority) in the region and in each chunk iterating over all the
filters.
If the migration fails, the code tries to migrate the filters back to
the old region. However, the rollback itself can also fail in which case
another migration will be erroneously performed. Besides the fact that
this ping pong is not a very good idea, it also creates a problem.
Each virtual chunk references two chunks: The currently used one
('vchunk->chunk') and a backup ('vchunk->chunk2'). During migration the
first holds the chunk we want to migrate filters to and the second holds
the chunk we are migrating filters from.
The code currently assumes - but does not verify - that the backup chunk
does not exist (NULL) if the currently used chunk does not reference the
target region. This assumption breaks when we are trying to rollback a
rollback, resulting in the backup chunk being overwritten and leaked
[1].
Fix by not rolling back a failed rollback and add a warning to avoid
future cases.
Fixes: 843500518509 ("mlxsw: spectrum_acl: Do rollback as another call to mlxsw_sp_acl_tcam_vchunk_migrate_all()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/d5edd4f4503934186ae5cfe268503b16345b4e0f.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the rare cases when the device resources are exhausted it is likely
that the rehash delayed work will fail. An error message will be printed
whenever this happens which can be overwhelming considering the fact
that the work is per-region and that there can be hundreds of regions.
Fix by rate limiting the error message.
Fixes: e5e7962ee5c2 ("mlxsw: spectrum_acl: Implement region migration according to hints") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/c510763b2ebd25e7990d80183feff91cde593145.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during rehash
The rehash delayed work migrates filters from one region to another
according to the number of available credits.
The migrated from region is destroyed at the end of the work if the
number of credits is non-negative as the assumption is that this is
indicative of migration being complete. This assumption is incorrect as
a non-negative number of credits can also be the result of a failed
migration.
The destruction of a region that still has filters referencing it can
result in a use-after-free [1].
Fix by not destroying the region if migration failed.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_ctcam_region_entry_remove+0x21d/0x230
Read of size 8 at addr ffff8881735319e8 by task kworker/0:31/3858
mlxsw: spectrum_acl_tcam: Fix possible use-after-free during activity update
The rule activity update delayed work periodically traverses the list of
configured rules and queries their activity from the device.
As part of this task it accesses the entry pointed by 'ventry->entry',
but this entry can be changed concurrently by the rehash delayed work,
leading to a use-after-free [1].
Fix by closing the race and perform the activity query under the
'vregion->lock' mutex.
[1]
BUG: KASAN: slab-use-after-free in mlxsw_sp_acl_tcam_flower_rule_activity_get+0x121/0x140
Read of size 8 at addr ffff8881054ed808 by task kworker/0:18/181
Fixes: 2bffc5322fd8 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1fcce0a60b231ebeb2515d91022284ba7b4ffe7a.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw: spectrum_acl_tcam: Fix race during rehash delayed work
The purpose of the rehash delayed work is to reduce the number of masks
(eRPs) used by an ACL region as the eRP bank is a global and limited
resource.
This is done in three steps:
1. Creating a new set of masks and a new ACL region which will use the
new masks and to which the existing filters will be migrated to. The
new region is assigned to 'vregion->region' and the region from which
the filters are migrated from is assigned to 'vregion->region2'.
2. Migrating all the filters from the old region to the new region.
3. Destroying the old region and setting 'vregion->region2' to NULL.
Only the second steps is performed under the 'vregion->lock' mutex
although its comments says that among other things it "Protects
consistency of region, region2 pointers".
This is problematic as the first step can race with filter insertion
from user space that uses 'vregion->region', but under the mutex.
Fix by holding the mutex across the entirety of the delayed work and not
only during the second step.
Fixes: 2bffc5322fd8 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/1ec1d54edf2bad0a369e6b4fa030aba64e1f124b.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw: spectrum_acl_tcam: Fix race in region ID allocation
Region identifiers can be allocated both when user space tries to insert
a new tc filter and when filters are migrated from one region to another
as part of the rehash delayed work.
There is no lock protecting the bitmap from which these identifiers are
allocated from, which is racy and leads to bad parameter errors from the
device's firmware.
Fix by converting the bitmap to IDA which handles its own locking. For
consistency, do the same for the group identifiers that are part of the
same structure.
Fixes: 2bffc5322fd8 ("mlxsw: spectrum_acl: Don't take mutex in mlxsw_sp_acl_tcam_vregion_rehash_work()") Reported-by: Amit Cohen <amcohen@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Tested-by: Alexander Zubkov <green@qrator.net> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/ce494b7940cadfe84f3e18da7785b51ef5f776e3.1713797103.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Hyunwoo Kim [Mon, 22 Apr 2024 09:37:17 +0000 (05:37 -0400)]
net: openvswitch: Fix Use-After-Free in ovs_ct_exit
Since kfree_rcu, which is called in the hlist_for_each_entry_rcu traversal
of ovs_ct_limit_exit, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 11efd5cb04a1 ("openvswitch: Support conntrack zone limit") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Aaron Conole <aconole@redhat.com> Link: https://lore.kernel.org/r/ZiYvzQN/Ry5oeFQW@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It was observed in the wild that pairs of consecutive packets would leave
the IPVS with the same wrong checksum, and the issue only went away when
disabling GSO.
IPVS needs to avoid computing the SCTP checksum when using GSO.
Fixes: 90017accff61 ("sctp: Add GSO support") Co-developed-by: Firo Yang <firo.yang@suse.com> Signed-off-by: Ismael Luceno <iluceno@suse.de> Tested-by: Andreas Taschner <andreas.taschner@suse.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Bluetooth: qca: set power_ctrl_enabled on NULL returned by gpiod_get_optional()
Any return value from gpiod_get_optional() other than a pointer to a
GPIO descriptor or a NULL-pointer is an error and the driver should
abort probing. That being said: commit 56d074d26c58 ("Bluetooth: hci_qca:
don't use IS_ERR_OR_NULL() with gpiod_get_optional()") no longer sets
power_ctrl_enabled on NULL-pointer returned by
devm_gpiod_get_optional(). Restore this behavior but bail-out on errors.
While at it: also bail-out on error returned when trying to get the
"swctrl" GPIO.
Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Zijun Hu <quic_zijuhu@quicinc.com> Closes: https://lore.kernel.org/linux-bluetooth/1713449192-25926-2-git-send-email-quic_zijuhu@quicinc.com/ Fixes: 56d074d26c58 ("Bluetooth: hci_qca: don't use IS_ERR_OR_NULL() with gpiod_get_optional()") Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Tested-by: Wren Turkal" <wt@penguintechs.org> Reported-by: Wren Turkal <wt@penguintechs.org> Reported-by: Zijun Hu <quic_zijuhu@quicinc.com> Reviewed-by: Krzysztof Kozlowski<krzysztof.kozlowski@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Chun-Yi Lee [Wed, 24 Apr 2024 13:59:03 +0000 (21:59 +0800)]
Bluetooth: hci_sync: Using hci_cmd_sync_submit when removing Adv Monitor
Since the d883a4669a1de be introduced in v6.4, bluetooth daemon
got the following failed message of MGMT_OP_REMOVE_ADV_MONITOR
command when controller is power-off:
bluetoothd[20976]:
src/adapter.c:reset_adv_monitors_complete() Failed to reset Adv
Monitors: Failed>
Normally this situation is happened when the bluetoothd deamon
be started manually after system booting. Which means that
bluetoothd received MGMT_EV_INDEX_ADDED event after kernel
runs hci_power_off().
Base on doc/mgmt-api.txt, the MGMT_OP_REMOVE_ADV_MONITOR command
can be used when the controller is not powered. This patch changes
the code in remove_adv_monitor() to use hci_cmd_sync_submit()
instead of hci_cmd_sync_queue().
Fixes: d883a4669a1de ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Cc: Manish Mandlik <mmandlik@google.com> Cc: Archie Pusaka <apusaka@chromium.org> Cc: Miao-chen Chou <mcchou@chromium.org> Signed-off-by: Chun-Yi Lee <jlee@suse.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Mon, 22 Apr 2024 13:57:48 +0000 (15:57 +0200)]
Bluetooth: qca: fix NULL-deref on non-serdev setup
Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
setup() is called for a non-serdev controller.
Fixes: e9b3e5b8c657 ("Bluetooth: hci_qca: only assign wakeup with serial port support") Cc: stable@vger.kernel.org # 6.2 Cc: Zhengping Jiang <jiangzp@google.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Mon, 22 Apr 2024 13:57:47 +0000 (15:57 +0200)]
Bluetooth: qca: fix NULL-deref on non-serdev suspend
Qualcomm ROME controllers can be registered from the Bluetooth line
discipline and in this case the HCI UART serdev pointer is NULL.
Add the missing sanity check to prevent a NULL-pointer dereference when
wakeup() is called for a non-serdev controller during suspend.
Just return true for now to restore the original behaviour and address
the crash with pre-6.2 kernels, which do not have commit e9b3e5b8c657
("Bluetooth: hci_qca: only assign wakeup with serial port support") that
causes the crash to happen already at setup() time.
Fixes: c1a74160eaf1 ("Bluetooth: hci_qca: Add device_may_wakeup support") Cc: stable@vger.kernel.org # 5.13 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Sean Wang [Wed, 17 Apr 2024 23:27:38 +0000 (16:27 -0700)]
Bluetooth: btusb: mediatek: Fix double free of skb in coredump
hci_devcd_append() would free the skb on error so the caller don't
have to free it again otherwise it would cause the double free of skb.
Fixes: 0b7015132878 ("Bluetooth: btusb: mediatek: add MediaTek devcoredump support")
Reported-by : Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: MGMT: Fix failing to MGMT_OP_ADD_UUID/MGMT_OP_REMOVE_UUID
These commands don't require the adapter to be up and running so don't
use hci_cmd_sync_queue which would check that flag, instead use
hci_cmd_sync_submit which would ensure mgmt_class_complete is set
properly regardless if any command was actually run or not.
Link: https://github.com/bluez/bluez/issues/809 Fixes: d883a4669a1d ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johan Hovold [Tue, 16 Apr 2024 09:15:09 +0000 (11:15 +0200)]
Bluetooth: qca: fix invalid device address check
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This was previously believed to be due to lack of persistent storage for
the address but it may also be due to integrators opting to not use the
on-chip OTP memory and instead store the address elsewhere (e.g. in
storage managed by secure world firmware).
According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have
on-chip OTP storage for the address.
As the device type alone cannot be used to determine when the address is
valid, instead read back the address during setup() and only set the
HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed.
This specifically makes sure that controllers that have been provisioned
with an address do not start as unconfigured.
Reported-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Link: https://lore.kernel.org/r/124a7d54-5a18-4be7-9a76-a12017f6cce5@quicinc.com/ Fixes: 5971752de44c ("Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990") Fixes: e668eb1e1578 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts") Fixes: 6945795bc81a ("Bluetooth: fix use-bdaddr-property quirk") Cc: stable@vger.kernel.org # 6.5 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Reported-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd492 ("Bluetooth: hci_event: set the conn encrypted before conn establishes") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Zijun Hu [Mon, 25 Mar 2024 08:11:49 +0000 (16:11 +0800)]
Bluetooth: btusb: Fix triggering coredump implementation for QCA
btusb_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific
command to trigger firmware coredump, but the command does not
have any event as its sync response, so it is not suitable to use
__hci_cmd_sync(), fixed by using __hci_cmd_send().
Fixes: 20981ce2d5a5 ("Bluetooth: btusb: Add WCN6855 devcoredump support") Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
WangYuli [Fri, 29 Mar 2024 02:34:39 +0000 (10:34 +0800)]
Bluetooth: btusb: Add Realtek RTL8852BE support ID 0x0bda:0x4853
Add the support ID(0x0bda, 0x4853) to usb_device_id table for
Realtek RTL8852BE.
Without this change the device utilizes an obsolete version of
the firmware that is encoded in it rather than the updated Realtek
firmware and config files from the firmware directory. The latter
files implement many new features.
Cc: stable@vger.kernel.org Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: WangYuli <wangyuli@uniontech.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: hci_sync: Use advertised PHYs on hci_le_ext_create_conn_sync
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224eec ("Bluetooth: Enable all supported LE PHY by default") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Bluetooth: Fix type of len in {l2cap,sco}_sock_getsockopt_old()
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org Closes: https://github.com/ClangBuiltLinux/linux/issues/2007 Link: https://github.com/llvm/llvm-project/issues/85647 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Merge tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- fix information leak by the buffer returned from LOGICAL_INO ioctl
- fix flipped condition in scrub when tracking sectors in zoned mode
- fix calculation when dropping extent range
- reinstate fallback to write uncompressed data in case of fragmented
space that could not store the entire compressed chunk
- minor fix to message formatting style to make it conforming to the
commonly used style
* tag 'for-6.9-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix wrong block_start calculation for btrfs_drop_extent_map_range()
btrfs: fix information leak in btrfs_ioctl_logical_to_ino()
btrfs: fallback if compressed IO fails for ENOSPC
btrfs: scrub: run relocation repair when/only needed
btrfs: remove colon from messages with state
Daniel Golle [Sun, 21 Apr 2024 00:08:31 +0000 (01:08 +0100)]
net: phy: mediatek-ge-soc: follow netdev LED trigger semantics
Only blink if the link is up on a LED which is programmed to also
indicate link-status.
Otherwise, if both LEDs are in use to indicate different speeds, the
resulting blinking being inverted on LEDs which aren't switched on at
a specific speed is quite counter-intuitive.
Also make sure that state left behind by reset or the bootloader is
recognized correctly including the half-duplex and full-duplex bits as
well as the (unsupported by Linux netdev trigger semantics) link-down
bit.
Fixes: c66937b0f8db ("net: phy: mediatek-ge-soc: support PHY LEDs") Signed-off-by: Daniel Golle <daniel@makrotopia.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Hyunwoo Kim [Mon, 22 Apr 2024 09:39:30 +0000 (05:39 -0400)]
net: gtp: Fix Use-After-Free in gtp_dellink
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of gtp_dellink, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 94dc550a5062 ("gtp: fix an use-after-free in ipv4_pdp_find()") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hyunwoo Kim [Mon, 22 Apr 2024 09:33:40 +0000 (05:33 -0400)]
tcp: Fix Use-After-Free in tcp_ao_connect_init
Since call_rcu, which is called in the hlist_for_each_entry_rcu traversal
of tcp_ao_connect_init, is not part of the RCU read critical section, it
is possible that the RCU grace period will pass during the traversal and
the key will be free.
To prevent this, it should be changed to hlist_for_each_entry_safe.
Fixes: 7c2ffaf21bd6 ("net/tcp: Calculate TCP-AO traffic keys") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/ZiYu9NJ/ClR8uSkH@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 21 Apr 2024 19:38:28 +0000 (19:38 +0000)]
net: usb: ax88179_178a: stop lying about skb->truesize
Some usb drivers try to set small skb->truesize and break
core networking stacks.
In this patch, I removed one of the skb->truesize overide.
I also replaced one skb_clone() by an allocation of a fresh
and small skb, to get minimally sized skbs, like we did
in commit 1e2c61172342 ("net: cdc_ncm: reduce skb truesize
in rx path")
Fixes: f8ebb3ac881b ("net: usb: ax88179_178a: Fix packet receiving") Reported-by: shironeko <shironeko@tesaguri.club> Closes: https://lore.kernel.org/netdev/c110f41a0d2776b525930f213ca9715c@tesaguri.club/ Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jose Alonso <joalonsof@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240421193828.1966195-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fixes: 02b24941619f ("ipv4: use dst hint for ipv4 list receive") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20240421184326.1704930-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet [Sun, 21 Apr 2024 17:52:48 +0000 (17:52 +0000)]
net: fix sk_memory_allocated_{add|sub} vs softirqs
Jonathan Heathcote reported a regression caused by blamed commit
on aarch64 architecture.
x86 happens to have irq-safe __this_cpu_add_return()
and __this_cpu_sub(), but this is not generic.
I think my confusion came from "struct sock" argument,
because these helpers are called with a locked socket.
But the memory accounting is per-proto (and per-cpu after
the blamed commit). We might cleanup these helpers later
to directly accept a "struct proto *proto" argument.
Switch to this_cpu_add_return() and this_cpu_xchg()
operations, and get rid of preempt_disable()/preempt_enable() pairs.
Fast path becomes a bit faster as a result :)
Many thanks to Jonathan Heathcote for his awesome report and
investigations.
Fixes: 3cd3399dd7a8 ("net: implement per-cpu reserves for memory_allocated") Reported-by: Jonathan Heathcote <jonathan.heathcote@bbc.co.uk> Closes: https://lore.kernel.org/netdev/VI1PR01MB42407D7947B2EA448F1E04EFD10D2@VI1PR01MB4240.eurprd01.prod.exchangelabs.com/ Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev> Link: https://lore.kernel.org/r/20240421175248.1692552-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever [Tue, 23 Apr 2024 21:52:24 +0000 (17:52 -0400)]
Revert "NFSD: Convert the callback workqueue to use delayed_work"
This commit was a pre-requisite for commit c1ccfcf1a9bf ("NFSD:
Reschedule CB operations when backchannel rpc_clnt is shut down"),
which has already been reverted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Chuck Lever [Tue, 23 Apr 2024 21:48:43 +0000 (17:48 -0400)]
Revert "NFSD: Reschedule CB operations when backchannel rpc_clnt is shut down"
The reverted commit attempted to enable NFSD to retransmit pending
callback operations if an NFS client disconnects, but
unintentionally introduces a hazardous behavior regression if the
client becomes permanently unreachable while callback operations are
still pending.
A disconnect can occur due to network partition or if the NFS server
needs to force the NFS client to retransmit (for example, if a GSS
window under-run occurs).
Reverting the commit will make NFSD behave the same as it did in
v6.8 and before. Pending callback operations are permanently lost if
the client connection is terminated before the client receives them.
For some callback operations, this loss is not harmful.
However, for CB_RECALL, the loss means a delegation might be revoked
unnecessarily. For CB_OFFLOAD, pending COPY operations will never
complete unless the NFS client subsequently sends an OFFLOAD_STATUS
operation, which the Linux NFS client does not currently implement.
ACPI: PM: s2idle: Evaluate all Low-Power S0 Idle _DSM functions
Commit 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a50 ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750 Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com> Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
Jakub Kicinski [Sat, 20 Apr 2024 02:08:26 +0000 (19:08 -0700)]
tools: ynl: don't ignore errors in NLMSG_DONE messages
NLMSG_DONE contains an error code, it has to be extracted.
Prior to this change all dumps will end in success,
and in case of failure the result is silently truncated.
Fixes: e4b48ed460d3 ("tools: ynl: add a completely generic client") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Donald Hunter <donald.hunter@gmail.com> Link: https://lore.kernel.org/r/20240420020827.3288615-1-kuba@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The dev_tracker is added to ax25_cb in ax25_bind(). When the
ax25 device is detaching, the dev_tracker of ax25_cb should be
deallocated in ax25_kill_by_device() instead of the dev_tracker
of ax25_dev. The log reported by ref_tracker is shown below:
Merge tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd
Pull smb server fixes from Steve French:
"Five ksmbd server fixes, most also for stable:
- rename fix
- two fixes for potential out of bounds
- fix for connections from MacOS (padding in close response)
- fix for when to enable persistent handles"
* tag '6.9-rc5-ksmbd-fixes' of git://git.samba.org/ksmbd:
ksmbd: add continuous availability share parameter
ksmbd: common: use struct_group_attr instead of struct_group for network_open_info
ksmbd: clear RENAME_NOREPLACE before calling vfs_rename
ksmbd: validate request buffer size in smb2_allocate_rsp_buf()
ksmbd: fix slab-out-of-bounds in smb2_allocate_rsp_buf
Paul Geurts [Thu, 18 Apr 2024 19:25:38 +0000 (21:25 +0200)]
NFC: trf7970a: disable all regulators on removal
During module probe, regulator 'vin' and 'vdd-io' are used and enabled,
but the vdd-io regulator overwrites the 'vin' regulator pointer. During
remove, only the vdd-io is disabled, as the vin regulator pointer is not
available anymore. When regulator_put() is called during resource
cleanup a kernel warning is given, as the regulator is still enabled.
Store the two regulators in separate pointers and disable both the
regulators on module remove.
Current maintainer Douglas Miller has left IBM and no replacement has
been assigned for the driver. The eHEA hardware was last used on
IBM POWER7 systems, the last of which reached end-of-support at the
end of 2020.
Signed-off-by: David Christensen <drc@linux.ibm.com> Reviewed-by: Pradeep Satyanarayana <pradeeps@linux.ibm.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Link: https://lore.kernel.org/r/20240418195517.528577-1-drc@linux.ibm.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit cleans up the uapi for vhost_vdpa by
better naming some of the enums which report blk
information to user space, and they are not
in any official releases yet.
Fixes: 1ac61ddfee93 ("vDPA: report virtio-blk flush info to user space") Fixes: ae1374b7f72c ("vDPA: report virtio-block read-only info to user space") Fixes: 330b8aea6924 ("vDPA: report virtio-block max segment size to user space") Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Message-Id: <20240415111047.1047774-1-lingshan.zhu@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Merge tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs
Pull bcachefs fixes from Kent Overstreet:
"Nothing too crazy in this one, and it looks like (fingers crossed) the
recovery and repair issues are settling down - although there's going
to be a long tail there, as we've still yet to really ramp up on error
injection or syzbot.
- fix a few more deadlocks in recovery
- fix u32/u64 issues in mi_btree_bitmap
- btree key cache shrinker now actually frees, with more
instrumentation coming so we can verify that it's working
correctly more easily in the future"
* tag 'bcachefs-2024-04-22' of https://evilpiepirate.org/git/bcachefs:
bcachefs: If we run merges at a lower watermark, they must be nonblocking
bcachefs: Fix inode early destruction path
bcachefs: Fix deadlock in journal write path
bcachefs: Tweak btree key cache shrinker so it actually frees
bcachefs: bkey_cached.btree_trans_barrier_seq needs to be a ulong
bcachefs: Fix missing call to bch2_fs_allocator_background_exit()
bcachefs: Check for journal entries overruning end of sb clean section
bcachefs: Fix bio alloc in check_extent_checksum()
bcachefs: fix leak in bch2_gc_write_reflink_key
bcachefs: KEY_TYPE_error is allowed for reflink
bcachefs: Fix bch2_dev_btree_bitmap_marked_sectors() shift
bcachefs: make sure to release last journal pin in replay
bcachefs: node scan: ignore multiple nodes with same seq if interior
bcachefs: Fix format specifier in validate_bset_keys()
bcachefs: Fix null ptr deref in twf from BCH_IOCTL_FSCK_OFFLINE
net: dsa: mv88e6xx: fix supported_interfaces setup in mv88e6250_phylink_get_caps()
With the recent PHYLINK changes requiring supported_interfaces to be set,
MV88E6250 family switches like the 88E6020 fail to probe - cmode is
never initialized on these devices, so mv88e6250_phylink_get_caps() does
not set any supported_interfaces flags.
Instead of a cmode, on 88E6250 we have a read-only port mode value that
encodes similar information. There is no reason to bother mapping port
mode to the cmodes of other switch models; instead we introduce a
mv88e6250_setup_supported_interfaces() that is called directly from
mv88e6250_phylink_get_caps().
ACPI: CPPC: Fix access width used for PCC registers
commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Tested-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com> Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Jarred White [Tue, 9 Apr 2024 05:23:09 +0000 (22:23 -0700)]
ACPI: CPPC: Fix bit_offset shift in MASK_VAL() macro
Commit 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a193 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses") Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A set of updates from Thorsten to his (new) guide to verifying bugs
and tracking down regressions"
* tag 'docs-6.9-fixes2' of git://git.lwn.net/linux:
docs: verify/bisect: stable regressions: first stable, then mainline
docs: verify/bisect: describe how to use a build host
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: proper headlines and more spacing
docs: verify/bisect: add and fetch stable branches ahead of time
docs: verify/bisect: use git switch, tag kernel, and various fixes
cifs: reinstate original behavior again for forceuid/forcegid
forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9e2 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.
This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.
Fixes: 24e0a1eff9e2 ("cifs: switch to new mount api") Signed-off-by: Takayuki Nagata <tnagata@redhat.com> Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Acked-by: Tom Talpey <tom@talpey.com> Signed-off-by: Steve French <stfrench@microsoft.com>
Detect and mitigate inode collsions that now occur since we
fixed 9p generating duplicate inode structures. Underlying
cause of these appears to be a race condition between reuse
of inode numbers in underlying file system and cleanup of
inode numbers in the client. Enabling caching
makes this much more likely to happen as it increases cleanup
latency due to writebacks.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
David S. Miller [Mon, 22 Apr 2024 13:13:19 +0000 (14:13 +0100)]
Merge branch 'bnxt_en-aer-fixes'
Michael Chan says:
====================
bnxt_en: AER fixes
This patchset fixes issues in the AER recovery logic. The first patch
refactors the code to make a shutdown function available for AER fatal
errors. The second patch fixes the AER fatal recovery logic. The
third patch fixes the health register logic to fix AER recovery failure
for the new P7 chips.
====================
Michael Chan [Fri, 19 Apr 2024 18:34:49 +0000 (11:34 -0700)]
bnxt_en: Fix error recovery for 5760X (P7) chips
During error recovery, such as AER fatal error slot reset, we call
bnxt_try_map_fw_health_reg() to try to get access to the health
register to determine the firmware state. Fix
bnxt_try_map_fw_health_reg() to recognize the P7 chip correctly
and set up the health register.
Fixes: a432a45bdba4 ("bnxt_en: Define basic P7 macros") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
We do not support two simultaneous recoveries so check for reset
flag, BNXT_STATE_IN_FW_RESET, and do not proceed with AER further.
When the pci channel state is pci_channel_io_frozen, the PCIe link
can not be trusted so we disable the traffic immediately and stop
BAR access by calling bnxt_fw_fatal_close(). BAR access after
AER fatal error can cause an NMI.
Fixes: f75d9a0aa967 ("bnxt_en: Re-write PCI BARs after PCI fatal error.") Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce bnxt_fw_fatal_close() API which can be used
to stop data path and disable device when firmware
is in fatal state.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu [Fri, 19 Apr 2024 08:02:00 +0000 (16:02 +0800)]
bridge/br_netlink.c: no need to return void function
br_info_notify is a void function. There is no need to return.
Fixes: b6d0425b816e ("bridge: cfm: Netlink Notifications.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Alex Elder [Sun, 21 Apr 2024 19:44:58 +0000 (14:44 -0500)]
mailmap: add entries for Alex Elder
Define my kernel.org address to be the canonical one, and add mailmap
entries for the various addresses (including typos) that have been
used over the years.
Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 20 Apr 2024 07:01:16 +0000 (07:01 +0000)]
icmp: prevent possible NULL dereferences from icmp_build_probe()
First problem is a double call to __in_dev_get_rcu(), because
the second one could return NULL.
if (__in_dev_get_rcu(dev) && __in_dev_get_rcu(dev)->ifa_list)
Second problem is a read from dev->ip6_ptr with no NULL check:
if (!list_empty(&rcu_dereference(dev->ip6_ptr)->addr_list))
Use the correct RCU API to fix these.
v2: add missing include <net/addrconf.h>
Fixes: d329ea5bd884 ("icmp: add response to RFC 8335 PROBE messages") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Andreas Roeseler <andreas.a.roeseler@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg [Sat, 20 Apr 2024 13:44:36 +0000 (15:44 +0200)]
wifi: iwlwifi: mvm: fix link ID management
On older (pre-MLD API) devices, we started also calling
iwl_mvm_set_link_mapping()/iwl_mvm_unset_link_mapping(),
but of course not also iwl_mvm_remove_link(). Since the
link ID was only released in iwl_mvm_remove_link() this
causes us to run out of FW link IDs very quickly. Fix
it by releasing the link ID correctly.
Kent Overstreet [Mon, 22 Apr 2024 03:32:18 +0000 (23:32 -0400)]
bcachefs: If we run merges at a lower watermark, they must be nonblocking
Fix another deadlock related to the merge path; previously, we switched
to always running merges at a lower watermark (because they are
noncritical); but when we run at a lower watermark we also need to run
nonblocking or we've introduced a new deadlock.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev> Reported-and-tested-by: s@m-h.ug
Merge tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver fixes from Greg KH:
"Here are some small char/misc and other driver fixes for 6.9-rc5.
Included in here are the following:
- binder driver fix for reported problem
- speakup crash fix
- mei driver fixes for reported problems
- comdei driver fix
- interconnect driver fixes
- rtsx driver fix
- peci.h kernel doc fix
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
peci: linux/peci.h: fix Excess kernel-doc description warning
binder: check offset alignment in binder_get_object()
comedi: vmk80xx: fix incomplete endpoint checking
mei: vsc: Unregister interrupt handler for system suspend
Revert "mei: vsc: Call wake_up() in the threaded IRQ handler"
misc: rtsx: Fix rts5264 driver status incorrect when card removed
mei: me: disable RPL-S on SPS and IGN firmwares
speakup: Avoid crash on very long word
interconnect: Don't access req_list while it's being manipulated
interconnect: qcom: x1e80100: Remove inexistent ACV_PERF BCM
Merge tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull kernfs bugfix and documentation update from Greg KH:
"Here are two changes for 6.9-rc5 that deal with "driver core" stuff,
that do the following:
- sysfs reference leak fix
- embargoed-hardware-issues.rst update for Power
Both of these have been in linux-next for over a week with no reported
issues"
* tag 'driver-core-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: embargoed-hardware-issues.rst: Add myself for Power
fs: sysfs: Fix reference leak in sysfs_break_active_protection()
Merge tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes for 6.9-rc5 that
resolve a bunch of reported problems. Included in here are:
- MAINTAINERS and .mailmap update for Richard Genoud
- serial core regression fixes from 6.9-rc1 changes
- pci id cleanups
- serial core crash fix
- stm32 driver fixes
- 8250 driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: stm32: Reset .throttled state in .startup()
serial: stm32: Return IRQ_NONE in the ISR if no handling happend
serial: core: Fix missing shutdown and startup for serial base port
serial: core: Clearing the circular buffer before NULLifying it
MAINTAINERS: mailmap: update Richard Genoud's email address
serial/pmac_zilog: Remove flawed mitigation for rx irq flood
serial: 8250_pci: Remove redundant PCI IDs
serial: core: Fix regression when runtime PM is not enabled
serial: mxs-auart: add spinlock around changing cts state
serial: 8250_dw: Revert: Do not reclock if already at correct rate
serial: 8250_lpc18xx: disable clks on error in probe()
Merge tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt driver fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.9-rc5.
Included in here are:
- MAINTAINER file update for invalid email address
- usb-serial device id updates
- typec driver fixes
- thunderbolt / usb4 driver fixes
- usb core shutdown fixes
- cdc-wdm driver revert for reported problem in -rc1
- usb gadget driver fixes
- xhci driver fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'usb-6.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
USB: serial: option: add Telit FN920C04 rmnet compositions
usb: dwc3: ep0: Don't reset resource alloc flag
Revert "usb: cdc-wdm: close race between read and workqueue"
USB: serial: option: add Rolling RW101-GL and RW135-GL support
USB: serial: option: add Lonsung U8300/U9300 product
USB: serial: option: add support for Fibocom FM650/FG650
USB: serial: option: support Quectel EM060K sub-models
USB: serial: option: add Fibocom FM135-GL variants
usb: misc: onboard_usb_hub: Disable the USB hub clock on failure
thunderbolt: Avoid notify PM core about runtime PM resume
thunderbolt: Fix wake configurations after device unplug
usb: dwc2: host: Fix dereference issue in DDMA completion flow.
usb: typec: mux: it5205: Fix ChipID value typo
MAINTAINERS: Drop Li Yang as their email address stopped working
usb: gadget: fsl: Initialize udc before using it
usb: Disable USB3 LPM at shutdown
usb: gadget: f_ncm: Fix UAF ncm object at re-bind after usb ep transport error
usb: typec: tcpm: Correct the PDO counting in pd_set
usb: gadget: functionfs: Wait for fences before enqueueing DMABUF
usb: gadget: functionfs: Fix inverted DMA fence direction
...
Merge tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Fix CPU feature dependencies of GFNI, VAES, and VPCLMULQDQ
- Print the correct error code when FRED reports a bad event type
- Add a FRED-specific INT80 handler without the special dances that
need to happen in the current one
- Enable the using-the-default-return-thunk-but-you-should-not warning
only on configs which actually enable those special return thunks
- Check the proper feature flags when selecting BHI retpoline
mitigation
* tag 'x86_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeatures: Fix dependencies for GFNI, VAES, and VPCLMULQDQ
x86/fred: Fix incorrect error code printout in fred_bad_type()
x86/fred: Fix INT80 emulation for FRED
x86/retpolines: Enable the default thunk warning only on relevant configs
x86/bugs: Fix BHI retpoline check
projects / thirdparty / kernel / linux.git / log
