sysctl: Load nf_log_ipv4 as default logging module for TRACE target

[ipfire-2.x.git] / config / etc / sysctl.conf

net.ipv4.ip_forward = 1
net.ipv4.ip_dynaddr = 1

net.ipv4.icmp_echo_ignore_broadcasts = 1
net.ipv4.icmp_ignore_bogus_error_responses = 1
net.ipv4.icmp_ratelimit = 1000
net.ipv4.icmp_ratemask = 6168

net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_fin_timeout = 30
net.ipv4.tcp_syn_retries = 3
net.ipv4.tcp_synack_retries = 3

net.ipv4.conf.default.arp_filter = 1
net.ipv4.conf.default.rp_filter = 0
net.ipv4.conf.default.accept_redirects = 0
net.ipv4.conf.default.accept_source_route = 0
net.ipv4.conf.default.log_martians = 1

net.ipv4.conf.all.arp_filter = 1
net.ipv4.conf.all.rp_filter = 0
net.ipv4.conf.all.accept_redirects = 0
net.ipv4.conf.all.accept_source_route = 0
net.ipv4.conf.all.log_martians = 1

kernel.printk = 1 4 1 7
vm.mmap_min_addr = 4096
vm.min_free_kbytes = 8192

# Disable IPv6 by default.
net.ipv6.conf.all.disable_ipv6 = 1
net.ipv6.conf.default.disable_ipv6 = 1

# Enable netfilter accounting
net.netfilter.nf_conntrack_acct=1

# Enable TRACE logging to syslog
net.netfilter.nf_log.2=nf_log_ipv4

# Disable netfilter on bridges.
net.bridge.bridge-nf-call-ip6tables = 0
net.bridge.bridge-nf-call-iptables = 0
net.bridge.bridge-nf-call-arptables = 0

# Try to keep kernel address exposures out of various /proc files (kallsyms, modules, etc).
kernel.kptr_restrict = 2

# Avoid kernel memory address exposures via dmesg.
kernel.dmesg_restrict = 1

# Turn on hard- and symlink protection
fs.protected_symlinks = 1
fs.protected_hardlinks = 1

# Minimal preemption granularity for CPU-bound tasks:
# (default: 1 msec#  (1 + ilog(ncpus)), units: nanoseconds)
kernel.sched_min_granularity_ns = 10000000

# If a workload mostly uses anonymous memory and it hits this limit, the entire
# working set is buffered for I/O, and any more write buffering would require
# swapping, so it's time to throttle writes until I/O can catch up.  Workloads
# that mostly use file mappings may be able to use even higher values.
#
# The generator of dirty data starts writeback at this percentage (system default
# is 20%)
vm.dirty_ratio = 10

# Start background writeback (via writeback threads) at this percentage (system
# default is 10%)
vm.dirty_background_ratio = 3

# The swappiness parameter controls the tendency of the kernel to move
# processes out of physical memory and onto the swap disk.
# 0 tells the kernel to avoid swapping processes out of physical memory
# for as long as possible
# 100 tells the kernel to aggressively swap processes out of physical memory
# and move them to swap cache
vm.swappiness = 1

# The total time the scheduler will consider a migrated process
# "cache hot" and thus less likely to be re-migrated
# (system default is 500000, i.e. 0.5 ms)
kernel.sched_migration_cost_ns = 5000000

# Increase kernel buffer size maximums
net.ipv4.tcp_mem = 16777216 16777216 16777216
net.ipv4.tcp_rmem = 4096 87380 16777216
net.ipv4.tcp_wmem = 4096 16384 16777216
net.ipv4.udp_mem = 3145728 4194304 16777216

# Prefer low latency over higher throughput
net.ipv4.tcp_low_latency=1

# Reserve more socket space for the TCP window
net.ipv4.tcp_adv_win_scale=2

# Enable TCP fast-open
net.ipv4.tcp_fastopen = 3