]> git.ipfire.org Git - ipfire-2.x.git/blame - src/patches/linux-2.6.32.45-arm_kirkwood_dreamplug.patch
Merge remote branch 'origin/next' into arm-port
[ipfire-2.x.git] / src / patches / linux-2.6.32.45-arm_kirkwood_dreamplug.patch
CommitLineData
1a1cdab0
AF
1diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c
2--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/dreamplug-setup.c 1970-01-01 00:00:00.000000000 +0000
3+++ linux-2.6.32.45/arch/arm/mach-kirkwood/dreamplug-setup.c 2011-09-15 19:23:01.000000000 +0000
4@@ -0,0 +1,140 @@
5+/*
6+ * arch/arm/mach-kirkwood/dreamplug-setup.c
7+ *
8+ * Marvell DreamPlug Reference Board Setup
9+ *
10+ * This file is licensed under the terms of the GNU General Public
11+ * License version 2. This program is licensed "as is" without any
12+ * warranty of any kind, whether express or implied.
13+ */
14+
15+#include <linux/kernel.h>
16+#include <linux/init.h>
17+#include <linux/platform_device.h>
18+#include <linux/mtd/partitions.h>
19+#include <linux/ata_platform.h>
20+#include <linux/mv643xx_eth.h>
21+#include <linux/gpio.h>
22+#include <linux/leds.h>
23+#include <linux/spi/flash.h>
24+#include <linux/spi/spi.h>
25+#include <linux/spi/orion_spi.h>
26+#include <asm/mach-types.h>
27+#include <asm/mach/arch.h>
28+#include <mach/kirkwood.h>
29+#include <plat/mvsdio.h>
30+#include "common.h"
31+#include "mpp.h"
32+
33+static const struct flash_platform_data dreamplug_spi_slave_data = {
34+ .type = "mx25l1606e",
35+};
36+
37+static struct spi_board_info __initdata dreamplug_spi_slave_info[] = {
38+ {
39+ .modalias = "m25p80",
40+ .platform_data = &dreamplug_spi_slave_data,
41+ .irq = -1,
42+ .max_speed_hz = 50000000,
43+ .bus_num = 0,
44+ .chip_select = 0,
45+ },
46+};
47+
48+static struct mv643xx_eth_platform_data dreamplug_ge00_data = {
49+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
50+};
51+
52+static struct mv643xx_eth_platform_data dreamplug_ge01_data = {
53+ .phy_addr = MV643XX_ETH_PHY_ADDR(1),
54+};
55+
56+static struct mv_sata_platform_data dreamplug_sata_data = {
57+ .n_ports = 1,
58+};
59+
60+static struct mvsdio_platform_data dreamplug_mvsdio_data = {
61+ /* unfortunately the CD signal has not been connected */
62+};
63+
64+static struct gpio_led dreamplug_led_pins[] = {
65+ {
66+ .name = "dreamplug:blue:bluetooth",
67+ .gpio = 47,
68+ .active_low = 1,
69+ },
70+ {
71+ .name = "dreamplug:green:wlan",
72+ .gpio = 48,
73+ .active_low = 1,
74+ },
75+ {
76+ .name = "dreamplug:blue:wlanap",
77+ .gpio = 49,
78+ .active_low = 1,
79+ },
80+};
81+
82+static struct gpio_led_platform_data dreamplug_led_data = {
83+ .leds = dreamplug_led_pins,
84+ .num_leds = ARRAY_SIZE(dreamplug_led_pins),
85+};
86+
87+static struct platform_device dreamplug_leds = {
88+ .name = "leds-gpio",
89+ .id = -1,
90+ .dev = {
91+ .platform_data = &dreamplug_led_data,
92+ }
93+};
94+
95+static unsigned int dreamplug_mpp_config[] __initdata = {
96+ MPP0_SPI_SCn,
97+ MPP1_SPI_MOSI,
98+ MPP2_SPI_SCK,
99+ MPP3_SPI_MISO,
100+ MPP4_GPIO,
101+ MPP5_GPO,
102+ MPP7_GPO,
103+ MPP18_GPO,
104+ MPP19_GPO,
105+ MPP47_GPIO, /* B_BLED */
106+ MPP48_GPIO, /* W_GLED */
107+ MPP49_GPIO, /* W_BLED */
108+ 0
109+};
110+
111+static void __init dreamplug_init(void)
112+{
113+ /*
114+ * Basic setup. Needs to be called early.
115+ */
116+ kirkwood_init();
117+ kirkwood_mpp_conf(dreamplug_mpp_config);
118+
119+ kirkwood_uart0_init();
120+
121+ spi_register_board_info(dreamplug_spi_slave_info,
122+ ARRAY_SIZE(dreamplug_spi_slave_info));
123+
124+ kirkwood_spi_init();
125+ kirkwood_ehci_init();
126+
127+ kirkwood_ge00_init(&dreamplug_ge00_data);
128+ kirkwood_ge01_init(&dreamplug_ge01_data);
129+ kirkwood_sata_init(&dreamplug_sata_data);
130+ kirkwood_sdio_init(&dreamplug_mvsdio_data);
131+
132+ platform_device_register(&dreamplug_leds);
133+}
134+
135+MACHINE_START(DREAMPLUG, "Marvell DreamPlug Reference Board")
136+ /* Maintainer: Siddarth Gore <gores <at> marvell.com> */
137+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
138+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
139+ .boot_params = 0x00000100,
140+ .init_machine = dreamplug_init,
141+ .map_io = kirkwood_map_io,
142+ .init_irq = kirkwood_init_irq,
143+ .timer = &kirkwood_timer,
144+MACHINE_END
145diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig
146--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Kconfig 2011-08-16 01:57:37.000000000 +0000
147+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Kconfig 2011-09-15 18:34:19.000000000 +0000
148@@ -32,6 +32,12 @@
149 Say 'Y' here if you want your kernel to support the
150 Marvell SheevaPlug Reference Board.
151
152+config MACH_DREAMPLUG
153+ bool "Marvell DreamPlug Reference Board"
154+ help
155+ Say 'Y' here if you want your kernel to support the
156+ Marvell DreamPlug Reference Board.
157+
158 config MACH_TS219
159 bool "QNAP TS-119 and TS-219 Turbo NAS"
160 help
161diff -Naur linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile
162--- linux-2.6.32.45.org/arch/arm/mach-kirkwood/Makefile 2011-08-16 01:57:37.000000000 +0000
163+++ linux-2.6.32.45/arch/arm/mach-kirkwood/Makefile 2011-09-15 18:36:51.000000000 +0000
164@@ -5,6 +5,7 @@
165 obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o
166 obj-$(CONFIG_MACH_MV88F6281GTW_GE) += mv88f6281gtw_ge-setup.o
167 obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
168+obj-$(CONFIG_MACH_DREAMPLUG) += dreamplug-setup.o
169 obj-$(CONFIG_MACH_TS219) += ts219-setup.o
170 obj-$(CONFIG_MACH_OPENRD_BASE) += openrd_base-setup.o
171
172diff -Naur linux-2.6.32.45.org/arch/arm/tools/mach-types linux-2.6.32.45/arch/arm/tools/mach-types
173--- linux-2.6.32.45.org/arch/arm/tools/mach-types 2011-08-16 01:57:37.000000000 +0000
174+++ linux-2.6.32.45/arch/arm/tools/mach-types 2011-09-15 19:12:48.000000000 +0000
175@@ -2536,3 +2536,4 @@
176 mxt_td60 MACH_MXT_TD60 MXT_TD60 2550
177 esyx MACH_ESYX ESYX 2551
178 bulldog MACH_BULLDOG BULLDOG 2553
179+dreamplug MACH_DREAMPLUG DREAMPLUG 2659