u-boot: try to boot without ramdisk if the system cannot load it

[ipfire-2.x.git] / config / u-boot / boot.cmd

diff --git a/config/u-boot/boot.cmd b/config/u-boot/boot.cmd
index 6679d679ab22c7e16ce60f32a2589cda2a1e7992..5cb4b8971cdb3d310a43dfc5093b1fa70e25a0a7 100644 (file)
--- a/config/u-boot/boot.cmd
+++ b/config/u-boot/boot.cmd
@@ -8,9 +8,13 @@ if test ${boot_part} = ""; then
 fi;
 
 if test ${soc} = "kirkwood"; then
-       setenv kernel_type kirkwood;
+       setenv kernel_type -kirkwood;
 else
-       setenv kernel_type multi;
+       if test ${cpu} = "armv8"; then
+               echo ;
+       else
+               setenv kernel_type -multi;
+       fi;
 fi;
 
 # Import uEnv txt...
@@ -34,13 +38,25 @@ fi;
 if test "${SERIAL-CONSOLE}" = "ON"; then
        if test ${console} = ""; then
                if test "${board}" = "rpi"; then
-                       if test "${fdtfile}" = "bcm2837-rpi-3-b-plus.dtb"; then
-                               setenv console ttyS1,115200n8;
+                       if test ${cpu} = "armv8"; then
+                               if test "${fdtfile}" = "broadcom/bcm2837-rpi-3-b-plus.dtb"; then
+                                       setenv console ttyS1,115200n8;
+                               else
+                                       if test "${fdtfile}" = "broadcom/bcm2837-rpi-3-b.dtb"; then
+                                               setenv console ttyS1,115200n8;
+                                       else
+                                               setenv console ttyAMA0,115200n8;
+                                       fi;
+                               fi;
                        else
-                               if test "${fdtfile}" = "bcm2837-rpi-3-b.dtb"; then
+                               if test "${fdtfile}" = "bcm2837-rpi-3-b-plus.dtb"; then
                                        setenv console ttyS1,115200n8;
                                else
-                                       setenv console ttyAMA0,115200n8;
+                                       if test "${fdtfile}" = "bcm2837-rpi-3-b.dtb"; then
+                                               setenv console ttyS1,115200n8;
+                                       else
+                                               setenv console ttyAMA0,115200n8;
+                                       fi;
                                fi;
                        fi;
                else
@@ -55,10 +71,18 @@ else
 fi;
 
 setenv fdt_high ffffffff;
-fatload ${boot_dev} ${boot_part} ${kernel_addr_r} vmlinuz-${KVER}-ipfire-${kernel_type};
-fatload ${boot_dev} ${boot_part} ${fdt_addr_r} dtb-${KVER}-ipfire-${kernel_type}/${fdtfile};
+fatload ${boot_dev} ${boot_part} ${kernel_addr_r} vmlinuz-${KVER}-ipfire${kernel_type};
+fatload ${boot_dev} ${boot_part} ${fdt_addr_r} dtb-${KVER}-ipfire${kernel_type}/${fdtfile};
+
+if test "${FDTCMDS}" = ""; then
+       echo ;
+else
+       fdt addr ${fdt_addr_r};
+       run FDTCMDS;
+fi;
+
 setenv ramdisk_addr ${ramdisk_addr_r}
-if fatload ${boot_dev} ${boot_part} ${ramdisk_addr} uInit-${KVER}-ipfire-${kernel_type}; then
+if fatload ${boot_dev} ${boot_part} ${ramdisk_addr} uInit-${KVER}-ipfire${kernel_type}; then
        echo Ramdisk loaded...;
 else
        echo Ramdisk not loaded...;
@@ -67,5 +91,8 @@ fi ;
 bootz ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r};
 booti ${kernel_addr_r} ${ramdisk_addr} ${fdt_addr_r};
 
+bootz ${kernel_addr_r} - ${fdt_addr_r};
+booti ${kernel_addr_r} - ${fdt_addr_r};
+
 # Recompile with:
 # mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr