-#!/usr/bin/perl\r
-#\r
-# Traffic shaping CGI\r
-#\r
-# Copyright 2003-04-06 David Kilpatrick <dave@thunder.com.au>\r
-#\r
-# $Id: shaping.cgi,v 1.3.2.15 2005/02/27 13:42:05 eoberlander Exp $\r
-#\r
-\r
-use strict;\r
-\r
-# enable only the following on debugging purpose\r
-#use warnings;\r
-#use CGI::Carp 'fatalsToBrowser';\r
-\r
-require 'CONFIG_ROOT/general-functions.pl';\r
-require "${General::swroot}/lang.pl";\r
-require "${General::swroot}/header.pl";\r
-\r
-#workaround to suppress a warning when a variable is used only once\r
-my @dummy = ( ${Header::table2colour}, ${Header::colouryellow} );\r
-undef (@dummy);\r
-\r
-my %shapingsettings=();\r
-my $configfile = "${General::swroot}/shaping/config";\r
-my $settingsfile = "${General::swroot}/shaping/settings";\r
-my $errormessage = '';\r
-\r
-&Header::showhttpheaders();\r
-\r
-$shapingsettings{'ACTION'} = '';\r
-$shapingsettings{'ENABLE'} = 'off';\r
-$shapingsettings{'VALID'} = '';\r
-$shapingsettings{'UPLINK'} = '';\r
-$shapingsettings{'DOWNLINK'} = '';\r
-$shapingsettings{'SERVICE_ENABLED'} = '';\r
-$shapingsettings{'SERVICE_PROT'} = '';\r
-$shapingsettings{'SERVICE_PRIO'} = '';\r
-$shapingsettings{'SERVICE_PORT'} = '';\r
-\r
-&Header::getcgihash(\%shapingsettings);\r
-\r
-open(FILE, "$configfile") or die 'Unable to open shaping config file.';\r
-my @current = <FILE>;\r
-close(FILE);\r
-\r
-if ($shapingsettings{'ACTION'} eq $Lang::tr{'save'})\r
-{\r
- if (!($shapingsettings{'UPLINK'} =~ /^\d+$/) ||\r
- ($shapingsettings{'UPLINK'} < 2))\r
- {\r
- $errormessage = $Lang::tr{'invalid uplink speed'};\r
- goto ERROR;\r
- }\r
-\r
- if (!($shapingsettings{'DOWNLINK'} =~ /^\d+$/) ||\r
- ($shapingsettings{'DOWNLINK'} < 2))\r
- {\r
- $errormessage = $Lang::tr{'invalid downlink speed'};\r
- goto ERROR;\r
- }\r
-\r
-ERROR:\r
- if ($errormessage) {\r
- $shapingsettings{'VALID'} = 'no'; }\r
- else {\r
- $shapingsettings{'VALID'} = 'yes'; }\r
- \r
- open(FILE,">$settingsfile") or die 'Unable to open shaping settings file.';\r
- flock FILE, 2;\r
- print FILE "VALID=$shapingsettings{'VALID'}\n";\r
- print FILE "ENABLE=$shapingsettings{'ENABLE'}\n";\r
- print FILE "UPLINK=$shapingsettings{'UPLINK'}\n";\r
- print FILE "DOWNLINK=$shapingsettings{'DOWNLINK'}\n";\r
- close FILE;\r
-\r
- if ($shapingsettings{'VALID'} eq 'yes') {\r
- system('/usr/local/bin/restartshaping');\r
- }\r
-}\r
-if ($shapingsettings{'ACTION'} eq $Lang::tr{'add'})\r
-{\r
- unless($shapingsettings{'SERVICE_PROT'} =~ /^(tcp|udp)$/) { $errormessage = $Lang::tr{'invalid input'}; }\r
- unless($shapingsettings{'SERVICE_PRIO'} =~ /^(10|20|30)$/) { $errormessage = $Lang::tr{'invalid input'}; }\r
- unless(&General::validport($shapingsettings{'SERVICE_PORT'})) { $errormessage = $Lang::tr{'invalid port'}; }\r
-\r
- if ( ! $errormessage)\r
- {\r
- if ($shapingsettings{'EDITING'} eq 'no')\r
- {\r
- open(FILE,">>$configfile") or die 'Unable to open shaping config file';\r
- flock FILE, 2;\r
- print FILE "$shapingsettings{'SERVICE_PROT'},$shapingsettings{'SERVICE_PORT'},$shapingsettings{'SERVICE_PRIO'},$shapingsettings{'SERVICE_ENABLED'}\n";\r
- } else {\r
- open(FILE,">$configfile") or die 'Unable to open shaping config file';\r
- flock FILE, 2;\r
- my $id = 0;\r
- foreach my $line (@current)\r
- {\r
- $id++;\r
- chomp($line);\r
- my @temp = split(/\,/,$line);\r
- if ($shapingsettings{'EDITING'} eq $id) {\r
- print FILE "$shapingsettings{'SERVICE_PROT'},$shapingsettings{'SERVICE_PORT'},$shapingsettings{'SERVICE_PRIO'},$shapingsettings{'SERVICE_ENABLED'}\n";\r
- } else {\r
- print FILE "$line\n";\r
- }\r
- }\r
- }\r
- close FILE;\r
- undef %shapingsettings;\r
- system ('/usr/local/bin/restartshaping');\r
- } else {\r
- # stay on edit mode if an error occur\r
- if ($shapingsettings{'EDITING'} ne 'no')\r
- {\r
- $shapingsettings{'ACTION'} = $Lang::tr{'edit'};\r
- $shapingsettings{'ID'} = $shapingsettings{'EDITING'};\r
- }\r
- }\r
-}\r
-\r
-if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'})\r
-{\r
- my $id = 0;\r
- foreach my $line (@current)\r
- {\r
- $id++;\r
- if ($shapingsettings{"ID"} eq $id)\r
- {\r
- chomp($line);\r
- my @temp = split(/\,/,$line);\r
- $shapingsettings{'SERVICE_PROT'} = $temp[0];\r
- $shapingsettings{'SERVICE_PORT'} = $temp[1];\r
- $shapingsettings{'SERVICE_PRIO'} = $temp[2];\r
- $shapingsettings{'SERVICE_ENABLED'} = $temp[3];\r
- }\r
- }\r
-}\r
-\r
-if ($shapingsettings{'ACTION'} eq $Lang::tr{'remove'} || $shapingsettings{'ACTION'} eq $Lang::tr{'toggle enable disable'})\r
-{\r
- open(FILE, ">$configfile") or die 'Unable to open config file.';\r
- flock FILE, 2;\r
- my $id = 0;\r
- foreach my $line (@current)\r
- {\r
- $id++;\r
- unless ($shapingsettings{"ID"} eq $id) { print FILE "$line"; }\r
- elsif ($shapingsettings{'ACTION'} eq $Lang::tr{'toggle enable disable'})\r
- {\r
- chomp($line);\r
- my @temp = split(/\,/,$line);\r
- if ($temp[3] eq "on") {\r
- print FILE "$temp[0],$temp[1],$temp[2],off\n";\r
- } else {\r
- print FILE "$temp[0],$temp[1],$temp[2],on\n";\r
- }\r
- }\r
- }\r
- close(FILE);\r
- system ('/usr/local/bin/restartshaping');\r
-}\r
-\r
-&General::readhash("${General::swroot}/shaping/settings", \%shapingsettings);\r
-\r
-if ($shapingsettings{'ACTION'} eq '')\r
-{\r
- $shapingsettings{'SERVICE_ENABLED'} = 'on';\r
- $shapingsettings{'SERVICE_PROT'} = 'tcp';\r
- $shapingsettings{'SERVICE_PRIO'} = '20';\r
- $shapingsettings{'SERVICE_PORT'} = '';\r
-}\r
-\r
-my %checked=();\r
-$checked{'ENABLE'}{'off'} = '';\r
-$checked{'ENABLE'}{'on'} = '';\r
-$checked{'ENABLE'}{$shapingsettings{'ENABLE'}} = "checked='checked'";\r
-\r
-my %service_checked=();\r
-$service_checked{'SERVICE_ENABLED'}{'off'} = '';\r
-$service_checked{'SERVICE_ENABLED'}{'on'} = '';\r
-$service_checked{'SERVICE_ENABLED'}{$shapingsettings{'SERVICE_ENABLED'}} = "checked='checked'";\r
-\r
-my %service_selected=();\r
-$service_selected{'SERVICE_PROT'}{'udp'} = '';\r
-$service_selected{'SERVICE_PROT'}{'tcp'} = '';\r
-$service_selected{'SERVICE_PROT'}{$shapingsettings{'SERVICE_PROT'}} = "selected='selected'";\r
-\r
-$service_selected{'SERVICE_PRIO'}{'10'} = '';\r
-$service_selected{'SERVICE_PRIO'}{'20'} = '';\r
-$service_selected{'SERVICE_PRIO'}{'30'} = '';\r
-$service_selected{'SERVICE_PRIO'}{$shapingsettings{'SERVICE_PRIO'}} = "selected='selected'";\r
-\r
-&Header::openpage($Lang::tr{'traffic shaping settings'}, 1, '');\r
-\r
-&Header::openbigbox('100%', 'left', '', $errormessage);\r
-\r
-if ($errormessage) {\r
- &Header::openbox('100%', 'left', $Lang::tr{'error messages'});\r
- print "<font class='base'>$errormessage </font>\n";\r
- &Header::closebox();\r
-}\r
-\r
-print "<form method='post' action='$ENV{'SCRIPT_NAME'}'>\n";\r
-\r
-&Header::openbox('100%', 'left', "$Lang::tr{'settings'}:");\r
-print <<END\r
-<table width='100%'>\r
-<tr>\r
- <td><input type='checkbox' name='ENABLE' $checked{'ENABLE'}{'on'} /></td>\r
- <td class='base' colspan='2'>$Lang::tr{'traffic shaping'}</td>\r
-</tr>\r
-<tr>\r
- <td> </td>\r
- <td width='30%' class='base'>$Lang::tr{'downlink speed'}: </td>\r
- <td width='70%'><input type='text' name='DOWNLINK' value='$shapingsettings{'DOWNLINK'}' size='5' /></td>\r
-</tr>\r
-<tr>\r
- <td> </td>\r
- <td class='base'>$Lang::tr{'uplink speed'}: </td>\r
- <td><input type='text' name='UPLINK' value='$shapingsettings{'UPLINK'}' size='5' /></td>\r
-</tr>\r
-</table>\r
-<table width='100%'>\r
-<hr />\r
-<tr>\r
- <td width='50%'> </td>\r
- <td width='50%' align='center'><input type='submit' name='ACTION' value='$Lang::tr{'save'}' /></td>\r
-</tr>\r
-</table>\r
-END\r
-;\r
-&Header::closebox;\r
-\r
-print "</form>\n";\r
-print "<form method='post' action='$ENV{'SCRIPT_NAME'}'>\n";\r
-\r
-my $buttontext = $Lang::tr{'add'};\r
-if($shapingsettings{'ACTION'} eq $Lang::tr{'edit'}) {\r
- $buttontext = $Lang::tr{'update'};\r
- &Header::openbox('100%', 'left', $Lang::tr{'edit service'});\r
-} else {\r
- &Header::openbox('100%', 'left', $Lang::tr{'add service'});\r
-}\r
-\r
-print <<END\r
-\r
-<table width='100%'>\r
-<tr>\r
- <td class='base'>$Lang::tr{'priority'}: </td>\r
- <td><select name='SERVICE_PRIO'>\r
- <option value='10' $service_selected{'SERVICE_PRIO'}{'10'}>$Lang::tr{'high'}</option>\r
- <option value='20' $service_selected{'SERVICE_PRIO'}{'20'}>$Lang::tr{'medium'}</option>\r
- <option value='30' $service_selected{'SERVICE_PRIO'}{'30'}>$Lang::tr{'low'}</option>\r
- </select></td>\r
- <td width='20%' class='base' align='right'>$Lang::tr{'port'}: </td>\r
- <td><input type='text' name='SERVICE_PORT' value='$shapingsettings{'SERVICE_PORT'}' size='5' /></td>\r
- <td width='20%' class='base' align='right'>$Lang::tr{'protocol'}: </td>\r
- <td><select name='SERVICE_PROT'>\r
- <option value='tcp' $service_selected{'SERVICE_PROT'}{'tcp'}>TCP</option>\r
- <option value='udp' $service_selected{'SERVICE_PROT'}{'udp'}>UDP</option>\r
- </select></td>\r
- <td width='20%' class='base' align='right'>$Lang::tr{'enabled'} </td> \r
- <td width='20%'><input type='checkbox' name='SERVICE_ENABLED' $service_checked{'SERVICE_ENABLED'}{'on'} /></td>\r
-</tr>\r
-</table>\r
-<table width='100%'>\r
-<hr />\r
-<tr>\r
- <td width='50%'> </td>\r
- <td width='50%' align='center'><input type='submit' name='SUBMIT' value='$buttontext' /><input type='hidden' name='ACTION' value='$Lang::tr{'add'}' /></td>\r
-</tr>\r
-</table>\r
-END\r
-;\r
-&Header::closebox;\r
-\r
-if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'}) {\r
- print "<input type='hidden' name='EDITING' value='$shapingsettings{'ID'}' />\n";\r
-} else {\r
- print "<input type='hidden' name='EDITING' value='no' />\n";\r
-}\r
-\r
-print "</form>\n";\r
-\r
-&Header::openbox('100%', 'left', $Lang::tr{'shaping list options'});\r
-print <<END\r
-<table width='100%' align='center'>\r
-<tr>\r
- <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'priority'}</b></td>\r
- <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'port'}</b></td>\r
- <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'protocol'}</b></td>\r
- <td align='center' class='boldbase' colspan='3'><b>$Lang::tr{'action'}</b></td>\r
-</tr>\r
-END\r
-;\r
-\r
-my $id = 0;\r
-open(SERVICES, "$configfile") or die 'Unable to open shaping config file.';\r
-while (<SERVICES>)\r
-{\r
- my $gif = '';\r
- my $prio = '';\r
- my $gdesc = '';\r
- $id++;\r
- chomp($_);\r
- my @temp = split(/\,/,$_);\r
- if ($temp[3] eq "on") {\r
- $gif = 'on.gif'; $gdesc=$Lang::tr{'click to disable'}; }\r
- else {\r
- $gif = 'off.gif'; $gdesc=$Lang::tr{'click to enable'}; }\r
- if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'} && $shapingsettings{'ID'} eq $id) {\r
- print "<tr bgcolor='${Header::colouryellow}'>\n"; }\r
- elsif ($id % 2) {\r
- print "<tr bgcolor='${Header::table1colour}'>\n"; }\r
- else {\r
- print "<tr bgcolor='${Header::table2colour}'>\n"; }\r
- if ($temp[2] eq "10") { $prio = $Lang::tr{'high'}; }\r
- if ($temp[2] eq "20") { $prio = $Lang::tr{'medium'}; }\r
- if ($temp[2] eq "30") { $prio = $Lang::tr{'low'}; }\r
- \r
-print <<END\r
-<td align='center'>$prio</td>\r
-<td align='center'>$temp[1]</td>\r
-<td align='center'>$temp[0]</td>\r
-\r
-<td align='center'>\r
- <form method='post' action='$ENV{'SCRIPT_NAME'}' name='frma$id'>\r
- <input type='image' name='$Lang::tr{'toggle enable disable'}' src='/images/$gif' alt='$gdesc' title='$gdesc' />\r
- <input type='hidden' name='ACTION' value='$Lang::tr{'toggle enable disable'}' />\r
- <input type='hidden' name='ID' value='$id' />\r
- </form>\r
-</td>\r
-\r
-<td align='center'>\r
- <form method='post' name='frmb$id' action='$ENV{'SCRIPT_NAME'}'>\r
- <input type='image' name='$Lang::tr{'edit'}' src='/images/edit.gif' title='$Lang::tr{'edit'}' alt='$Lang::tr{'edit'}' />\r
- <input type='hidden' name='ID' value='$id' />\r
- <input type='hidden' name='ACTION' value='$Lang::tr{'edit'}' />\r
- </form>\r
-</td>\r
-\r
-<td align='center'>\r
- <form method='post' name='frmc$id' action='$ENV{'SCRIPT_NAME'}'>\r
- <input type='image' name='$Lang::tr{'remove'}' src='/images/delete.gif' title='$Lang::tr{'remove'}' alt='$Lang::tr{'remove'}' />\r
- <input type='hidden' name='ID' value='$id' />\r
- <input type='hidden' name='ACTION' value='$Lang::tr{'remove'}' />\r
- </form>\r
-</td>\r
-\r
-</tr>\r
-END\r
-;\r
-}\r
-close(SERVICES);\r
-\r
-print <<END\r
-</table>\r
-END\r
-;\r
-&Header::closebox;\r
-\r
-\r
-&Header::closebigbox();\r
-\r
-&Header::closepage;\r
+#!/usr/bin/perl
+#
+# Traffic shaping CGI
+#
+# Copyright 2003-04-06 David Kilpatrick <dave@thunder.com.au>
+#
+# $Id: shaping.cgi,v 1.3.2.15 2005/02/27 13:42:05 eoberlander Exp $
+#
+
+use strict;
+
+# enable only the following on debugging purpose
+#use warnings;
+#use CGI::Carp 'fatalsToBrowser';
+
+require 'CONFIG_ROOT/general-functions.pl';
+require "${General::swroot}/lang.pl";
+require "${General::swroot}/header.pl";
+
+#workaround to suppress a warning when a variable is used only once
+my @dummy = ( ${Header::table2colour}, ${Header::colouryellow} );
+undef (@dummy);
+
+my %shapingsettings=();
+my $configfile = "${General::swroot}/shaping/config";
+my $settingsfile = "${General::swroot}/shaping/settings";
+my $errormessage = '';
+
+&Header::showhttpheaders();
+
+$shapingsettings{'ACTION'} = '';
+$shapingsettings{'ENABLE'} = 'off';
+$shapingsettings{'VALID'} = '';
+$shapingsettings{'UPLINK'} = '';
+$shapingsettings{'DOWNLINK'} = '';
+$shapingsettings{'SERVICE_ENABLED'} = '';
+$shapingsettings{'SERVICE_PROT'} = '';
+$shapingsettings{'SERVICE_PRIO'} = '';
+$shapingsettings{'SERVICE_PORT'} = '';
+
+&Header::getcgihash(\%shapingsettings);
+
+open(FILE, "$configfile") or die 'Unable to open shaping config file.';
+my @current = <FILE>;
+close(FILE);
+
+if ($shapingsettings{'ACTION'} eq $Lang::tr{'save'})
+{
+ if (!($shapingsettings{'UPLINK'} =~ /^\d+$/) ||
+ ($shapingsettings{'UPLINK'} < 2))
+ {
+ $errormessage = $Lang::tr{'invalid uplink speed'};
+ goto ERROR;
+ }
+
+ if (!($shapingsettings{'DOWNLINK'} =~ /^\d+$/) ||
+ ($shapingsettings{'DOWNLINK'} < 2))
+ {
+ $errormessage = $Lang::tr{'invalid downlink speed'};
+ goto ERROR;
+ }
+
+ERROR:
+ if ($errormessage) {
+ $shapingsettings{'VALID'} = 'no'; }
+ else {
+ $shapingsettings{'VALID'} = 'yes'; }
+
+ open(FILE,">$settingsfile") or die 'Unable to open shaping settings file.';
+ flock FILE, 2;
+ print FILE "VALID=$shapingsettings{'VALID'}\n";
+ print FILE "ENABLE=$shapingsettings{'ENABLE'}\n";
+ print FILE "UPLINK=$shapingsettings{'UPLINK'}\n";
+ print FILE "DOWNLINK=$shapingsettings{'DOWNLINK'}\n";
+ close FILE;
+
+ if ($shapingsettings{'VALID'} eq 'yes') {
+ system('/usr/local/bin/restartshaping');
+ }
+}
+if ($shapingsettings{'ACTION'} eq $Lang::tr{'add'})
+{
+ unless($shapingsettings{'SERVICE_PROT'} =~ /^(tcp|udp)$/) { $errormessage = $Lang::tr{'invalid input'}; }
+ unless($shapingsettings{'SERVICE_PRIO'} =~ /^(10|20|30)$/) { $errormessage = $Lang::tr{'invalid input'}; }
+ unless(&General::validport($shapingsettings{'SERVICE_PORT'})) { $errormessage = $Lang::tr{'invalid port'}; }
+
+ if ( ! $errormessage)
+ {
+ if ($shapingsettings{'EDITING'} eq 'no')
+ {
+ open(FILE,">>$configfile") or die 'Unable to open shaping config file';
+ flock FILE, 2;
+ print FILE "$shapingsettings{'SERVICE_PROT'},$shapingsettings{'SERVICE_PORT'},$shapingsettings{'SERVICE_PRIO'},$shapingsettings{'SERVICE_ENABLED'}\n";
+ } else {
+ open(FILE,">$configfile") or die 'Unable to open shaping config file';
+ flock FILE, 2;
+ my $id = 0;
+ foreach my $line (@current)
+ {
+ $id++;
+ chomp($line);
+ my @temp = split(/\,/,$line);
+ if ($shapingsettings{'EDITING'} eq $id) {
+ print FILE "$shapingsettings{'SERVICE_PROT'},$shapingsettings{'SERVICE_PORT'},$shapingsettings{'SERVICE_PRIO'},$shapingsettings{'SERVICE_ENABLED'}\n";
+ } else {
+ print FILE "$line\n";
+ }
+ }
+ }
+ close FILE;
+ undef %shapingsettings;
+ system ('/usr/local/bin/restartshaping');
+ } else {
+ # stay on edit mode if an error occur
+ if ($shapingsettings{'EDITING'} ne 'no')
+ {
+ $shapingsettings{'ACTION'} = $Lang::tr{'edit'};
+ $shapingsettings{'ID'} = $shapingsettings{'EDITING'};
+ }
+ }
+}
+
+if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'})
+{
+ my $id = 0;
+ foreach my $line (@current)
+ {
+ $id++;
+ if ($shapingsettings{"ID"} eq $id)
+ {
+ chomp($line);
+ my @temp = split(/\,/,$line);
+ $shapingsettings{'SERVICE_PROT'} = $temp[0];
+ $shapingsettings{'SERVICE_PORT'} = $temp[1];
+ $shapingsettings{'SERVICE_PRIO'} = $temp[2];
+ $shapingsettings{'SERVICE_ENABLED'} = $temp[3];
+ }
+ }
+}
+
+if ($shapingsettings{'ACTION'} eq $Lang::tr{'remove'} || $shapingsettings{'ACTION'} eq $Lang::tr{'toggle enable disable'})
+{
+ open(FILE, ">$configfile") or die 'Unable to open config file.';
+ flock FILE, 2;
+ my $id = 0;
+ foreach my $line (@current)
+ {
+ $id++;
+ unless ($shapingsettings{"ID"} eq $id) { print FILE "$line"; }
+ elsif ($shapingsettings{'ACTION'} eq $Lang::tr{'toggle enable disable'})
+ {
+ chomp($line);
+ my @temp = split(/\,/,$line);
+ if ($temp[3] eq "on") {
+ print FILE "$temp[0],$temp[1],$temp[2],off\n";
+ } else {
+ print FILE "$temp[0],$temp[1],$temp[2],on\n";
+ }
+ }
+ }
+ close(FILE);
+ system ('/usr/local/bin/restartshaping');
+}
+
+&General::readhash("${General::swroot}/shaping/settings", \%shapingsettings);
+
+if ($shapingsettings{'ACTION'} eq '')
+{
+ $shapingsettings{'SERVICE_ENABLED'} = 'on';
+ $shapingsettings{'SERVICE_PROT'} = 'tcp';
+ $shapingsettings{'SERVICE_PRIO'} = '20';
+ $shapingsettings{'SERVICE_PORT'} = '';
+}
+
+my %checked=();
+$checked{'ENABLE'}{'off'} = '';
+$checked{'ENABLE'}{'on'} = '';
+$checked{'ENABLE'}{$shapingsettings{'ENABLE'}} = "checked='checked'";
+
+my %service_checked=();
+$service_checked{'SERVICE_ENABLED'}{'off'} = '';
+$service_checked{'SERVICE_ENABLED'}{'on'} = '';
+$service_checked{'SERVICE_ENABLED'}{$shapingsettings{'SERVICE_ENABLED'}} = "checked='checked'";
+
+my %service_selected=();
+$service_selected{'SERVICE_PROT'}{'udp'} = '';
+$service_selected{'SERVICE_PROT'}{'tcp'} = '';
+$service_selected{'SERVICE_PROT'}{$shapingsettings{'SERVICE_PROT'}} = "selected='selected'";
+
+$service_selected{'SERVICE_PRIO'}{'10'} = '';
+$service_selected{'SERVICE_PRIO'}{'20'} = '';
+$service_selected{'SERVICE_PRIO'}{'30'} = '';
+$service_selected{'SERVICE_PRIO'}{$shapingsettings{'SERVICE_PRIO'}} = "selected='selected'";
+
+&Header::openpage($Lang::tr{'traffic shaping settings'}, 1, '');
+
+&Header::openbigbox('100%', 'left', '', $errormessage);
+
+if ($errormessage) {
+ &Header::openbox('100%', 'left', $Lang::tr{'error messages'});
+ print "<font class='base'>$errormessage </font>\n";
+ &Header::closebox();
+}
+
+print "<form method='post' action='$ENV{'SCRIPT_NAME'}'>\n";
+
+&Header::openbox('100%', 'left', "$Lang::tr{'settings'}:");
+print <<END
+<table width='100%'>
+<tr>
+ <td><input type='checkbox' name='ENABLE' $checked{'ENABLE'}{'on'} /></td>
+ <td class='base' colspan='2'>$Lang::tr{'traffic shaping'}</td>
+</tr>
+<tr>
+ <td> </td>
+ <td width='30%' class='base'>$Lang::tr{'downlink speed'}: </td>
+ <td width='70%'><input type='text' name='DOWNLINK' value='$shapingsettings{'DOWNLINK'}' size='5' /></td>
+</tr>
+<tr>
+ <td> </td>
+ <td class='base'>$Lang::tr{'uplink speed'}: </td>
+ <td><input type='text' name='UPLINK' value='$shapingsettings{'UPLINK'}' size='5' /></td>
+</tr>
+</table>
+<table width='100%'>
+<hr />
+<tr>
+ <td width='50%'> </td>
+ <td width='50%' align='center'><input type='submit' name='ACTION' value='$Lang::tr{'save'}' /></td>
+</tr>
+</table>
+END
+;
+&Header::closebox;
+
+print "</form>\n";
+print "<form method='post' action='$ENV{'SCRIPT_NAME'}'>\n";
+
+my $buttontext = $Lang::tr{'add'};
+if($shapingsettings{'ACTION'} eq $Lang::tr{'edit'}) {
+ $buttontext = $Lang::tr{'update'};
+ &Header::openbox('100%', 'left', $Lang::tr{'edit service'});
+} else {
+ &Header::openbox('100%', 'left', $Lang::tr{'add service'});
+}
+
+print <<END
+
+<table width='100%'>
+<tr>
+ <td class='base'>$Lang::tr{'priority'}: </td>
+ <td><select name='SERVICE_PRIO'>
+ <option value='10' $service_selected{'SERVICE_PRIO'}{'10'}>$Lang::tr{'high'}</option>
+ <option value='20' $service_selected{'SERVICE_PRIO'}{'20'}>$Lang::tr{'medium'}</option>
+ <option value='30' $service_selected{'SERVICE_PRIO'}{'30'}>$Lang::tr{'low'}</option>
+ </select></td>
+ <td width='20%' class='base' align='right'>$Lang::tr{'port'}: </td>
+ <td><input type='text' name='SERVICE_PORT' value='$shapingsettings{'SERVICE_PORT'}' size='5' /></td>
+ <td width='20%' class='base' align='right'>$Lang::tr{'protocol'}: </td>
+ <td><select name='SERVICE_PROT'>
+ <option value='tcp' $service_selected{'SERVICE_PROT'}{'tcp'}>TCP</option>
+ <option value='udp' $service_selected{'SERVICE_PROT'}{'udp'}>UDP</option>
+ </select></td>
+ <td width='20%' class='base' align='right'>$Lang::tr{'enabled'} </td>
+ <td width='20%'><input type='checkbox' name='SERVICE_ENABLED' $service_checked{'SERVICE_ENABLED'}{'on'} /></td>
+</tr>
+</table>
+<table width='100%'>
+<hr />
+<tr>
+ <td width='50%'> </td>
+ <td width='50%' align='center'><input type='submit' name='SUBMIT' value='$buttontext' /><input type='hidden' name='ACTION' value='$Lang::tr{'add'}' /></td>
+</tr>
+</table>
+END
+;
+&Header::closebox;
+
+if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'}) {
+ print "<input type='hidden' name='EDITING' value='$shapingsettings{'ID'}' />\n";
+} else {
+ print "<input type='hidden' name='EDITING' value='no' />\n";
+}
+
+print "</form>\n";
+
+&Header::openbox('100%', 'left', $Lang::tr{'shaping list options'});
+print <<END
+<table width='100%' align='center'>
+<tr>
+ <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'priority'}</b></td>
+ <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'port'}</b></td>
+ <td width='33%' align='center' class='boldbase'><b>$Lang::tr{'protocol'}</b></td>
+ <td align='center' class='boldbase' colspan='3'><b>$Lang::tr{'action'}</b></td>
+</tr>
+END
+;
+
+my $id = 0;
+open(SERVICES, "$configfile") or die 'Unable to open shaping config file.';
+while (<SERVICES>)
+{
+ my $gif = '';
+ my $prio = '';
+ my $gdesc = '';
+ $id++;
+ chomp($_);
+ my @temp = split(/\,/,$_);
+ if ($temp[3] eq "on") {
+ $gif = 'on.gif'; $gdesc=$Lang::tr{'click to disable'}; }
+ else {
+ $gif = 'off.gif'; $gdesc=$Lang::tr{'click to enable'}; }
+ if ($shapingsettings{'ACTION'} eq $Lang::tr{'edit'} && $shapingsettings{'ID'} eq $id) {
+ print "<tr bgcolor='${Header::colouryellow}'>\n"; }
+ elsif ($id % 2) {
+ print "<tr bgcolor='${Header::table1colour}'>\n"; }
+ else {
+ print "<tr bgcolor='${Header::table2colour}'>\n"; }
+ if ($temp[2] eq "10") { $prio = $Lang::tr{'high'}; }
+ if ($temp[2] eq "20") { $prio = $Lang::tr{'medium'}; }
+ if ($temp[2] eq "30") { $prio = $Lang::tr{'low'}; }
+
+print <<END
+<td align='center'>$prio</td>
+<td align='center'>$temp[1]</td>
+<td align='center'>$temp[0]</td>
+
+<td align='center'>
+ <form method='post' action='$ENV{'SCRIPT_NAME'}' name='frma$id'>
+ <input type='image' name='$Lang::tr{'toggle enable disable'}' src='/images/$gif' alt='$gdesc' title='$gdesc' />
+ <input type='hidden' name='ACTION' value='$Lang::tr{'toggle enable disable'}' />
+ <input type='hidden' name='ID' value='$id' />
+ </form>
+</td>
+
+<td align='center'>
+ <form method='post' name='frmb$id' action='$ENV{'SCRIPT_NAME'}'>
+ <input type='image' name='$Lang::tr{'edit'}' src='/images/edit.gif' title='$Lang::tr{'edit'}' alt='$Lang::tr{'edit'}' />
+ <input type='hidden' name='ID' value='$id' />
+ <input type='hidden' name='ACTION' value='$Lang::tr{'edit'}' />
+ </form>
+</td>
+
+<td align='center'>
+ <form method='post' name='frmc$id' action='$ENV{'SCRIPT_NAME'}'>
+ <input type='image' name='$Lang::tr{'remove'}' src='/images/delete.gif' title='$Lang::tr{'remove'}' alt='$Lang::tr{'remove'}' />
+ <input type='hidden' name='ID' value='$id' />
+ <input type='hidden' name='ACTION' value='$Lang::tr{'remove'}' />
+ </form>
+</td>
+
+</tr>
+END
+;
+}
+close(SERVICES);
+
+print <<END
+</table>
+END
+;
+&Header::closebox;
+
+
+&Header::closebigbox();
+
+&Header::closepage;
projects / ipfire-2.x.git / blobdiff