]> git.ipfire.org Git - ipfire-2.x.git/blobdiff - langs/en/cgi-bin/en.pl
OpenVPN: max-clients value has been enhanced
[ipfire-2.x.git] / langs / en / cgi-bin / en.pl
index fdfae843469dd1c55b64fe597b74182f602fc52a..0b1b304a9c7399da677bfe222bd4693fb0e7dc97 100644 (file)
 'country' => 'Country',
 'country codes and flags' => 'Country Codes and Flags:',
 'countrycode' => 'Code',
+'cpu frequency' => 'CPU frequency',
 'cpu frequency per' => 'CPU frequency per',
 'cpu idle usage' => 'Idle CPU Usage',
 'cpu interrupt usage' => 'Interrupt CPU Usage',
 'directory writeable' => 'directory writeable',
 'disabled' => 'disabled',
 'disconnect' => 'OVPN Stop / Disconnect',
+'disconnected' => 'Disconnected',
 'disconnects' => 'Disconnects',
 'disk access per' => 'Disk Access per',
 'disk usage' => 'Disk usage',
 'dns address done' => 'The DNS server address settings are going to be saved.',
 'dns address recon' => 'Trying to reconnect!',
 'dns check failed' => 'DNS check failed',
+'dns check servers' => 'Check DNS Servers',
 'dns configuration' => 'DNS Configuration',
 'dns could not add server' => 'Could not add server - Reason:',
 'dns desc' => 'If the red0 interface gets the IP address information via DHCP from the provider, the DNS server addresses will be set automatically. Now here you are able to change these DNS server IP addresses with your own ones.',
 'dns forwarding dnssec disabled notice' => '(DNSSEC disabled)',
 'dns header' => 'Assign DNS server addresses only for DHCP on red0',
 'dns isp assigned nameserver' => 'ISP-assigned DNS server',
+'dns isp nameservers and tls not allowed' => 'ISP-assigned DNS servers and TLS cannot be used at the same time.',
 'dns list' => 'List of free public DNS servers',
 'dns menu' => 'Assign DNS Server',
 'dns mode for qname minimisation' => 'QNAME Minimisation',
 'dns no address given' => 'No IP Address given.',
 'dns no tls hostname given' => 'No TLS hostname given.',
 'dns proxy server' => 'DNS Proxy Server',
+'dns recursor mode' => 'Recursor Mode',
 'dns saved' => 'Successfully saved!',
 'dns saved txt' => 'The two entered DNS server addresses have been saved successfully.<br />You have to reboot or reconnect that the changes have effect!',
 'dns server' => 'DNS Server',
 'drop action2' => 'Default behaviour of (input) firewall',
 'drop forward' => 'Log dropped forward packets',
 'drop input' => 'Log dropped input packets',
-'drop newnotsyn' => 'Log dropped new not syn packets',
+'drop newnotsyn' => 'Log dropped new not SYN packets',
 'drop outgoing' => 'Log dropped outgoing packets',
 'drop portscan' => 'Log dropped portscan packets',
 'drop proxy' => 'Drop all packets not addressed to proxy',
 'duplicate ip bold' => 'Duplicate addresses are in <b>bold</b>',
 'duplicate mac' => 'Duplicate MAC address entered',
 'duplicate name' => 'That name is already being used, please choose another.',
+'duration' => 'Duration',
 'dyn dns source choice' => 'Dynamic DNS provider(s) will receive an IP address for this IPFire from:',
 'dynamic dns' => 'Dynamic DNS',
 'dynamic dns client' => 'Dynamic DNS Client',
 'email success' => 'Test message successfully sent',
 'email testmail' => 'Send test mail',
 'email text' => 'Test mail from IPFire Mail Service',
-'email tls' => 'Use TLS',
+'email tls' => 'TLS mode',
+'email tls explicit' => 'explicit (STARTTLS)',
+'email tls implicit' => 'implicit (TLS)',
 'email usemail' => 'Activate Mail Service',
 'emailreportlevel' => 'E-mailreportlevel',
 'emerging pro rules' => 'Emergingthreats.net Pro Rules',
 'error config' => 'Could not open /var/ipfire/ovpn/config/ZERINA.ovpn !',
 'error external access' => 'Could not open /var/ipfire/xtaccess/config (external acccess could not be granted)!',
 'error messages' => 'Error messages',
+'error the to date has to be later than the from date' => 'The to date has to be later than the from date!',
 'esp encryption' => 'ESP Encryption:',
 'esp grouptype' => 'ESP Grouptype:',
 'esp integrity' => 'ESP Integrity:',
 'fwhost OpenVPN static host' => 'OpenVPN static host',
 'fwhost OpenVPN static network' => 'OpenVPN static network',
 'fwhost Standard Network' => 'Standard network',
-'fwhost addgeoipgrp' => 'Add new GeoIP group',
 'fwhost addgrp' => 'Add new network/host group',
 'fwhost addgrpname' => 'Group name:',
 'fwhost addhost' => 'Add new host',
+'fwhost addlocationgrp' => 'Add new Location group',
 'fwhost addnet' => 'Add new network',
 'fwhost addservice' => 'Add service',
 'fwhost addservicegrp' => 'Add new service group',
 'fwhost change' => 'Modify',
 'fwhost changeremark' => 'You modified just the remark',
 'fwhost cust addr' => 'Hosts',
-'fwhost cust geoip' => 'GeoIP Groups',
-'fwhost cust geoipgroup' => 'GeoIP Groups',
-'fwhost cust geoiplocation' => 'GeoIP Locations',
 'fwhost cust grp' => 'Network/Host Groups',
+'fwhost cust location' => 'Location Groups',
+'fwhost cust locationgroup' => 'Location Groups',
+'fwhost cust locationlocation' => 'Location Locations',
 'fwhost cust net' => 'Networks',
 'fwhost cust service' => 'Services',
 'fwhost cust srvgrp' => 'Service Groups',
 'fwhost ipsec net' => 'IPsec networks:',
 'fwhost menu' => 'Firewall Groups',
 'fwhost netaddress' => 'Network address',
-'fwhost newgeoipgrp' => 'GeoIP Groups',
 'fwhost newgrp' => 'Network/Host Groups',
 'fwhost newhost' => 'Hosts',
+'fwhost newlocationgrp' => 'Location Groups',
 'fwhost newnet' => 'Networks',
 'fwhost newservice' => 'Services',
 'fwhost newservicegrp' => 'Service Groups',
 'generating the root and host certificates may take a long time. it can take up to several minutes on older hardware. please be patient' => 'Generating the root and host certificates may take a long time.  It can take up to several minutes on older hardware. Please be patient.',
 'genkey' => 'Generate PSK',
 'genre' => 'Genre',
-'geoip' => 'GeoIP',
-'geoipblock' => 'GeoIP Block',
-'geoipblock block countries' => 'Block countries',
-'geoipblock configuration' => 'GeoIP Configuration',
-'geoipblock country code' => 'Country Code',
-'geoipblock country is allowed' => 'Incoming traffic from this country is allowed',
-'geoipblock country is blocked' => 'Incoming traffic from this country will be blocked',
-'geoipblock country name' => 'Country Name',
-'geoipblock enable feature' => 'Enable GeoIP based blocking:',
-'geoipblock flag' => 'Flag',
 'global settings' => 'Global Settings',
 'gpl i accept these terms and conditions' => 'I accept these terms and conditions',
 'gpl license agreement' => 'License Agreement',
 'host to net vpn' => 'Host-to-Net Virtual Private Network (RoadWarrior)',
 'hostname' => 'Hostname',
 'hostname and domain already in use' => 'Hostname and domain already in use.',
-'hostname cant be empty' => 'Hostname can\'t be empty.',
+'hostname cant be empty' => 'Hostname cannot be empty.',
 'hostname not set' => 'Hostname not set.',
 'hosts config added' => 'Hosts config added',
 'hosts config changed' => 'Hosts config changed',
 'invalid input for keepalive 1:2' => 'Invalid input for Keepalive use at least a ratio of 1:2',
 'invalid input for keepalive 2' => 'Invalid input for Keepalive ping-restart',
 'invalid input for local ip address' => 'Invalid input for local IP address',
-'invalid input for max clients' => 'Invalid input for Max Clients',
+'invalid input for max clients' => 'Invalid input for Max Clients. The maximum of 1024 clients has been exceeded',
 'invalid input for mode' => 'Invalid input for mode',
 'invalid input for name' => 'Invalid input for user\'s full name or system hostname',
 'invalid input for oink code' => 'Invalid input for Oink code',
 'ipsec mode tunnel' => 'Tunnel',
 'ipsec network' => 'IPsec network',
 'ipsec no connections' => 'No active IPsec connections',
+'ipsec routing table entries' => 'IPsec Routing Table Entries',
 'ipsec settings' => 'IPsec Settings',
 'iptable rules' => 'IPTable rules',
 'iptmangles' => 'IPTable Mangles',
 'lateprompting' => 'Lateprompting',
 'lease expires' => 'Lease expires',
 'least preferred' => 'least preferred',
+'legacy architecture warning' => 'You are running IPFire on a legacy architecture and it is recommended to upgrade',
 'legend' => 'Legend',
 'length' => 'Length',
 'lifetime' => 'Lifetime:',
 'local vpn hostname/ip' => 'Local VPN Hostname/IP',
 'localkey' => 'Localkey',
 'localkeyfile' => 'Localkeyfile',
+'location' => 'Location',
+'locationblock' => 'Location Block',
+'locationblock block countries' => 'Block countries',
+'locationblock configuration' => 'Location Configuration',
+'locationblock country code' => 'Country Code',
+'locationblock country is allowed' => 'Incoming traffic from this country is allowed',
+'locationblock country is blocked' => 'Incoming traffic from this country will be blocked',
+'locationblock country name' => 'Country Name',
+'locationblock enable feature' => 'Enable Location based blocking:',
+'locationblock flag' => 'Flag',
 'log' => 'Log',
 'log enabled' => 'Log Enabled',
 'log level' => 'Log Level',
 'no cfg upload' => 'No data was uploaded',
 'no dhcp lease' => 'No DHCP lease has been acquired',
 'no eciadsl synch.bin file' => 'No ECI ADSL synch.bin file. Please upload.',
+'no entries' => 'No entries at the moment.',
 'no filter pass' => 'Enter the standard class for non-filtered packets.',
 'no fritzdsl driver' => 'No Fritz!DSL driver.  Please upload.',
 'no hardware random number generator' => 'This system has no source for entropy.',
 'ovpn add conf' => 'Additional configuration',
 'ovpn con stat' => 'OpenVPN Connection Statistics',
 'ovpn config' => 'OVPN-Config',
+'ovpn connection name' => 'Connection Name',
 'ovpn crypt options' => 'Cryptographic options',
 'ovpn device' => 'OpenVPN device:',
 'ovpn dh' => 'Diffie-Hellman parameters length',
 'ovpn reneg sec' => 'Session key lifetime:',
 'ovpn routes push' => 'Routes (one per line) e.g. 192.168.10.0/255.255.255.0 192.168.20.0/24',
 'ovpn routes push options' => 'Route push options',
+'ovpn rw connection log' => 'OpenVPN Roadwarrior Connections Log',
 'ovpn server status' => 'Current OpenVPN server status:',
 'ovpn subnet' => 'OpenVPN subnet:',
 'ovpn subnet is invalid' => 'OpenVPN subnet is invalid.',
 'pakfire install description' => 'Please choose one or more items from the list below and <br /> click the plus to install.',
 'pakfire install package' => 'You want to install the following packages: ',
 'pakfire installed addons' => 'Installed Addons:',
+'pakfire invalid tree' => 'Invalid repository selected',
 'pakfire last core list update' => 'Last core list update made',
 'pakfire last package update' => 'Last packages list update made',
 'pakfire last serverlist update' => 'Last server list update made',
 'pakfire possible dependency' => ' There may be depending packages, here is a list of packages that need to be installed.',
 'pakfire register' => 'Register at pakfire-server:',
 'pakfire system state' => 'System Status',
+'pakfire tree' => 'Repository',
+'pakfire tree stable' => 'Stable',
+'pakfire tree testing' => 'Testing',
+'pakfire tree unstable' => 'Unstable',
 'pakfire uninstall description' => 'Please choose one or more items from the list below and <br /> click the minus to uninstall.',
 'pakfire uninstall package' => 'You want to uninstall the following packages: ',
 'pakfire update daily' => 'Search for updates daily:',
 'reboot sure' => 'Are you sure that you want to reboot?',
 'rebooting' => 'Rebooting',
 'rebooting ipfire' => 'Rebooting IPFire',
+'received' => 'Received',
 'reconnect' => 'Reconnect',
 'reconnection' => 'Reconnection',
 'red' => 'Internet',
 'send cr' => 'ISP requires Carriage Return:',
 'send email notification' => 'Enabled, send e-mail notification',
 'send test mail' => 'Send Teste-mail',
+'sent' => 'Sent',
 'september' => 'September',
 'serial' => 'Serial',
 'server reserved' => 'The connection name server is reserved and not allowed',
 'squid extension methods' => 'Your <tt>extension_methods</tt> list',
 'squid extension methods invalid' => 'Your \'extension_methods\' list can only contain uppercase words of letters and digits, separated with a space. ',
 'squid fix cache' => 'Repair cache',
+'srbds' => 'Special register buffer data sampling',
 'src port' => 'Src Port',
 'srcprt range overlaps' => 'Source port range overlaps an already defined port.',
 'srcprt within existing' => 'Source port is within an already defined port range.',
 'tor traffic limit soft' => 'Traffic limit almost reached. Not accepting any new connections.',
 'tor traffic read written' => 'Total traffic (read/written)',
 'tor use exit nodes' => 'Use only these exit nodes (one per line)',
-'total connection time' => 'Total connection time',
+'total connection time' => 'Total Connection Time',
 'total hits for log section' => 'Total hits for log section',
 'traffic back' => 'Back',
 'traffic calc time' => 'Time of calculation',
 'vpn start action start' => 'Always On',
 'vpn statistic n2n' => 'VPN: Net-to-Net Statistics',
 'vpn statistic rw' => 'VPN: Roadwarrior Statistics',
-'vpn subjectaltname' => 'Subject Alt Name',
+'vpn subjectaltname' => 'SubjectAlternativeName',
+'vpn subjectaltname missing' => 'SubjectAlternativeName cannot be emtpy.',
 'vpn wait' => 'WAITING',
 'vpn watch' => 'Restart net-to-net vpn when remote peer IP changes (dyndns).',
 'vpn weak' => 'Weak',
 'wlanap wlan status' => 'WLan Status',
 'wol wakeup' => 'WakeUp',
 'workgroup' => 'Workgroup',
+'working' => 'Working',
 'written bytes' => 'Bytes Written',
 'xtaccess all error' => 'You cannot set an external access to ALL, that is done in the port forwarding record.',
 'xtaccess bad transfert' => 'If you specify a port destination range, the source range must be identical !',
 'zoneconf nic assignment' => 'NIC Assignment',
 'zoneconf nicmode bridge' => 'Bridge',
 'zoneconf nicmode default' => 'Default',
-'zoneconf nicmode macvtap' => 'MacVTtap',
+'zoneconf nicmode macvtap' => 'MacVTap',
 'zoneconf notice reboot' => 'Please reboot to apply your changes.',
 'zoneconf title' => 'Zone Configuration',
 'zoneconf val native assignment error' => 'A NIC cannot be accessed natively by more than one zone.',