%tr = (
%tr,
+'24 hours' => '24 Hours',
'Act as' => 'Act as:',
'Add Level7 rule' => 'Add Level7 rule',
'Add Port Rule' => 'Add port rule',
'Add Rule' => 'Add rule',
'Add a route' => 'Add a route',
'Async logging enabled' => 'Enable asynchronous writing of the syslog file',
+'Captive' => 'Captive Portal',
+'Captive 1day' => '1 day',
+'Captive 1month' => '1 month',
+'Captive 1week' => '1 week',
+'Captive ACTIVATE' => 'ACTIVATE',
+'Captive GAIN ACCESS' => 'GAIN ACCESS',
+'Captive WiFi coupon' => 'WiFi Coupon',
+'Captive activate' => 'Activate',
+'Captive activated' => 'Activated',
+'Captive active on' => 'Activated on',
+'Captive agree tac' => 'I agree with the terms & conditions below.',
+'Captive auth_lic' => 'License',
+'Captive auth_vou' => 'Voucher',
+'Captive authentication' => 'Type of Access',
+'Captive brand color' => 'Brand Color',
+'Captive branding' => 'Branding',
+'Captive client session expiry time' => 'Session Expiry Time',
+'Captive config' => 'Settings',
+'Captive coupon' => 'Coupon',
+'Captive err doublevoucher' => 'A coupon with this code already exists',
+'Captive expire' => 'Expire',
+'Captive expiry time' => 'Expiry Time',
+'Captive export coupons' => 'Export Coupons',
+'Captive generate coupons' => 'Generate Coupons',
+'Captive generated coupon no' => 'Number of coupons',
+'Captive heading terms' => 'Terms & Conditions',
+'Captive heading voucher' => 'Coupon or Access Code',
+'Captive invalid coupon' => 'You entered an invalid coupon code. Please try again.',
+'Captive invalid logosize' => 'The uploaded image file does not meet the required resolution of at least 1280x400 but not larger than 1920x800 pixels',
+'Captive invalid_voucher' => 'Invalid code. Please try again',
+'Captive ip' => 'IP Address',
+'Captive issued coupons' => 'Issued Coupons',
+'Captive logo uploaded' => 'Logo uploaded',
+'Captive logo_set' => 'Current Logo',
+'Captive mac' => 'MAC Address',
+'Captive noexpiretime' => 'No valid connection time range given',
+'Captive nolimit' => 'unlimited',
+'Captive nr' => 'Number',
+'Captive please accept the terms and conditions' => 'Please accept the terms & conditions',
+'Captive please enter a coupon code' => 'Please enter a coupon code',
+'Captive portal' => 'IPFire Captive Portal',
+'Captive portal coupons' => 'Captive Portal Coupons',
+'Captive terms' => 'Terms & Conditions',
+'Captive terms short' => 'T&Cs',
+'Captive time' => 'Access time post activation (hours)',
+'Captive title' => 'Title of Login Page',
+'Captive upload logo' => 'Upload Logo',
+'Captive upload logo recommendations' => '(PNG or JPEG, recommended 1280x720 pixels)',
+'Captive valid for' => 'Valid for',
+'Captive voactive' => 'Active Coupons',
+'Captive voucher' => 'Coupon',
+'Captive vouchervalid' => 'Allowed time for this coupon',
+'Captive vout' => 'Issued Vouchers',
+'Captive wrong ext' => 'Uploaded file has wrong filetype',
'Choose Rule' => 'Choose <u>one</u> of the following rules.',
'Class' => 'Class',
'Class was deleted' => 'with potential subclasses was deleted',
'ConnSched time' => 'Time:',
'ConnSched up' => 'Up',
'ConnSched weekdays' => 'Days of the week:',
+'Daily' => 'Daily',
+'Disabled' => 'Disabled',
'Edit an existing route' => 'Edit an existing route',
'Enter TOS' => 'Activate or deactivate TOS-bits <br /> and then press <i>Save</i>.',
'Existing Files' => 'Files in database',
'Utilization on' => 'Utilization on',
'Verbose' => 'Verbose:',
'WakeOnLan' => 'Wake On Lan',
+'Weekly' => 'Weekly',
'a ca certificate with this name already exists' => 'A CA certificate with this name already exists.',
'a connection with this common name already exists' => 'A connection with this common name already exists.',
'a connection with this name already exists' => 'A connection with this name already exists.',
'advproxy errmsg radius secret' => 'RADIUS shared secret required',
'advproxy errmsg radius server' => 'Invalid IP address for RADIUS Server',
'advproxy errmsg time restriction' => 'Invalid time restriction',
+'advproxy errmsg wpad invalid ip or mask' => 'WPAD: Invalid IP or subnet for excluded IP subnet',
'advproxy error design' => 'Error messages design',
'advproxy error language' => 'Error messages language',
'advproxy fake referer' => 'Fake referer submitted to external sites',
'advproxy visible hostname' => 'Visible hostname',
'advproxy web browser' => 'Web browser',
'advproxy wednesday' => 'Wed',
+'advproxy wpad example dst_noproxy_ip' => 'e.g. 192.168.2.0/255.255.255.0',
+'advproxy wpad example dst_noproxy_url' => 'e.g. *.ipfire.org*',
+'advproxy wpad label dst_noproxy_ip' => 'Excluded IP Subnets (one per line)',
+'advproxy wpad label dst_noproxy_url' => 'Excluded URL s (one per line)',
+'advproxy wpad notice' => 'Notice: For WPAD/PAC to work properly, furtcher changes need to be made. Please see the <a href="https://wiki.ipfire.org/configuration/network/proxy/extend/wpad" target="_blank">Wiki</a>.',
+'advproxy wpad title' => 'Web Proxy Auto-Discovery Protocol (WPAD) / Proxy Auto-Config (PAC)',
+'advproxy wpad view pac' => 'Open PAC File',
'again' => 'Again:',
'age second' => 'second',
'age seconds' => 'seconds',
'and' => 'And',
'ansi t1.483' => 'TO BE REMOVED',
'apcupsd' => 'APC-UPS status',
+'application layer gateways' => 'Application Layer Gateways',
'apply' => 'Apply now',
'april' => 'April',
'archive not exist' => 'Configuration archive does not exist',
'credits' => 'Credits',
'crl' => 'Certificate Revocation List',
'cron server' => 'CRON Server',
+'crypto error' => 'Cryptographic error',
+'crypto warning' => 'Cryptographic warning',
+'cryptographic settings' => 'Cryptographic Settings',
'current' => 'Current',
'current aliases' => 'Current aliases',
'current class' => 'Current class',
'day after' => 'Day after',
'day before' => 'Day before',
'day-graph' => 'Day',
-'days' => 'days.',
+'days' => 'Days',
'dbfile' => 'Dbfile',
'ddns help dnsmadeeasy' => 'In the field for hostname enter your ID (or a list of IDs seperated by;)',
'ddns help freedns' => 'In the fied username enter your connect string',
'deep scan directories' => 'Scan recursive',
'def lease time' => 'Default Lease Time',
'default' => 'Default',
+'default IP address' => 'Default IP Address',
'default ip' => 'Default IP address',
'default lease time' => 'Default lease time (mins):',
'default networks' => 'Default networks',
'devices on blue' => 'Devices on BLUE',
'dh' => 'Diffie-Hellman parameters',
'dh key move failed' => 'Diffie-Hellman parameters move failed.',
-'dh key warn' => 'Creating DH-parameters with lengths of 1024 or 2048 bits takes up to several minutes. Lengths of 3072 or 4096 bits might needs several hours. Please be patient.',
+'dh key warn' => 'Creating DH-parameters with a length of 2048 bits takes up to several minutes. Lengths of 3072 or 4096 bits might needs several hours. Please be patient.',
'dh key warn1' => 'For weak systems or systems with little entropy, it is recommended to upload long Diffie-Hellman parameters by usage of the upload function.',
'dh name is invalid' => 'Name is invalid, please use "dh1024.pem".',
'dh parameter' => 'Diffie-Hellman parameters',
'dhcp bootp pxe data' => 'Enter optional bootp pxe data for this fixed lease',
'dhcp configuration' => 'DHCP configuration',
'dhcp create fixed leases' => 'Create fixed leases',
+'dhcp dns enable update' => 'Enable DNS Update (RFC2136):',
+'dhcp dns key name' => 'Key Name',
+'dhcp dns update' => 'DNS Update',
+'dhcp dns update algo' => 'Algorithm',
+'dhcp dns update secret' => 'Secret',
'dhcp fixed lease err1' => 'For a fix lease you have to enter the MAC address or the hostname, or you enter both.',
'dhcp fixed lease help1' => 'IP Addresses might be entered as FQDN',
'dhcp mode' => 'DHCP',
'display traffic at home' => 'Display calculated traffic on startpage',
'display webinterface effects' => 'Activate effects',
'dl client arch' => 'Download Client Package (zip)',
+'dl client arch insecure' => 'Download insecure Client Package (zip)',
'dmz' => 'DMZ',
'dmz pinhole configuration' => 'DMZ pinhole configuration',
'dmz pinhole rule added' => 'DMZ pinhole rule added; restarting DMZ pinhole',
'dns error 0' => 'The IP address of the <strong>primary</strong> DNS server is not valid, please check your entries!<br />The entered <strong>secondary</strong> DNS server address is valid.',
'dns error 01' => 'The entered IP address of the <strong>primary</strong> and <strong>secondary</strong> DNS server are not valid, please check your entries!',
'dns error 1' => 'The IP address of the <strong>secondary</strong> DNS server is not valid, please check your entries!<br />The entered <strong>primary</strong> DNS server address is valid.',
+'dns forward disable dnssec' => 'Disable DNSSEC (dangerous)',
+'dns forwarding dnssec disabled notice' => '(DNSSEC disabled)',
'dns header' => 'Assign DNS server addresses only for DHCP on red0',
'dns list' => 'List of free public DNS servers',
'dns menu' => 'Assign DNS-Server',
'dnsforward' => 'DNS Forwarding',
'dnsforward add a new entry' => 'Add a new entry',
'dnsforward configuration' => 'DNS forward configuration',
+'dnsforward dnssec disabled' => 'DNSSEC Validation is disabled',
'dnsforward edit an entry' => 'Edit an existing entry',
'dnsforward entries' => 'Current entries',
-'dnsforward forward_server' => 'Nameserver',
+'dnsforward forward_servers' => 'Nameservers',
'dnsforward zone' => 'Zone',
'dnssec aware' => 'DNSSEC Aware',
+'dnssec disabled warning' => 'WARNING: DNSSEC has been disabled',
'dnssec information' => 'DNSSEC Information',
'dnssec not supported' => 'DNSSEC Not supported',
'dnssec validating' => 'DNSSEC Validating',
'edit share' => 'Edit share',
'editor' => 'Editor',
'eg' => 'e.g.:',
+'eight hours' => '8 Hours',
'email config' => 'Configuration',
'email empty field' => 'Empty field',
-'email error' => 'ERROR: Testmail could not be sent',
+'email error' => 'ERROR: Test mail could not be sent',
'email invalid' => 'Invalid field',
-'email invalid mailfqdn' => 'Invalid mailserver fqdn',
-'email invalid mailip' => 'Invalid mailserver IP address',
-'email invalid mailport' => 'Invalid mailserver port',
-'email mailaddr' => 'Mailserver address',
+'email invalid mailfqdn' => 'Invalid mail server fqdn',
+'email invalid mailip' => 'Invalid mail server IP address',
+'email invalid mailport' => 'Invalid mail server port',
+'email mailaddr' => 'Mail Server Address',
'email mailpass' => 'Password',
-'email mailport' => 'Mailserver port',
-'email mailrcpt' => 'Mail recipient',
-'email mailsender' => 'Mail sender',
+'email mailport' => 'Mail Server Port',
+'email mailrcpt' => 'Mail Recipient',
+'email mailsender' => 'Mail Sender',
'email mailuser' => 'Username',
'email server can not be empty' => 'E-mail server can not be empty',
-'email settings' => 'Mailservice',
-'email subject' => 'IPFire Testmail',
-'email success' => 'Testmail successfully sent',
-'email testmail' => 'Send testmail',
-'email text' => 'Testmail from IPFire Mailservice.',
+'email settings' => 'Mail Service',
+'email subject' => 'IPFire Test Mail',
+'email success' => 'Test message successfully sent',
+'email testmail' => 'Send test mail',
+'email text' => 'Test mail from IPFire Mail Service',
'email tls' => 'Use TLS',
-'email usemail' => 'Activate Mailservice',
+'email usemail' => 'Activate Mail Service',
'emailreportlevel' => 'E-mailreportlevel',
+'emerging pro rules' => 'Emergingthreats.net Pro Rules',
'emerging rules' => 'Emergingthreats.net Community Rules',
'empty' => 'This field may be left blank',
'empty profile' => 'empty',
'err rs 6 decrypt' => 'Error decrypting archive',
'err rs 7 untartst' => 'Invalid decrypted archive',
'err rs 8 untar' => 'Error untarring archive',
+'error' => 'Error',
'error config' => 'Could not open /var/ipfire/ovpn/config/ZERINA.ovpn !',
'error external access' => 'Could not open /var/ipfire/xtaccess/config (external acccess could not be granted)!',
'error messages' => 'Error messages',
'false min bandwith' => 'Minimum bandwith is false.',
'february' => 'February',
'fetch ip from' => 'Guess the real public IP with help of an external server',
+'fifteen minutes' => '15 Minutes',
'filename' => 'Filename',
'filesystem full' => 'Filesystem full',
'fireinfo ipfire version' => 'IPFire version',
'fireinfo why read more' => 'Read more about the reasons.',
'fireinfo your profile id' => 'Your profile ID',
'firewall' => 'Firewall',
-'firewall graphs' => 'Firewall Graphs',
+'firewall graph country' => 'Firewall-Diagram (Country)',
+'firewall graph ip' => 'Firewall-Diagram (IP)',
+'firewall graph port' => 'Firewall-Diagram (Port)',
'firewall hits' => 'Total number of firewall hits for',
'firewall hits per' => 'firewallhits per',
'firewall log' => 'Firewall log',
-'firewall log viewer' => 'Firewall Log Viewer',
+'firewall log country' => 'Firewall log (Country)',
+'firewall log ip' => 'Firewall log (IP)',
+'firewall log port' => 'Firewall log (Port)',
'firewall logs' => 'Firewall Logs',
'firewall logs country' => 'Fw-Loggraphs (Country)',
'firewall logs ip' => 'Fw-Loggraphs (IP)',
'firmware' => 'Firmware',
'firmware upload' => 'Upload Firmware/Drivers',
'first' => 'First',
+'five minutes' => '5 Minutes',
'fixed ip lease added' => 'Fixed IP lease added',
'fixed ip lease modified' => 'Fixed IP lease modified',
'fixed ip lease removed' => 'Fixed IP lease removed',
'forwarding rule added' => 'Forwarding rule added; restarting forwarder',
'forwarding rule removed' => 'Forwarding rule removed; restarting forwarder',
'forwarding rule updated' => 'Forwarding rule updated; restarting forwarder',
+'four hours' => '4 Hours',
'free' => 'Free',
'free memory' => 'Free Memory ',
'free swap' => 'Free Swap',
'fwdfw additional' => 'Additional settings',
'fwdfw addrule' => 'Add/Edit rule:',
'fwdfw all icmp' => 'All ICMP types',
+'fwdfw all subnets' => 'All subnets',
'fwdfw change' => 'Update',
'fwdfw copy' => 'Copy',
'fwdfw delete' => 'Delete',
'generate a certificate' => 'Generate a certificate:',
'generate dh key' => 'Generate Diffie-Hellman parameters',
'generate iso' => 'Generate ISO',
+'generate ptr' => 'Generate PTR',
'generate root/host certificates' => 'Generate root/host certificates',
'generate tripwire keys and init' => 'generate tripwire keys and init',
'generatekeys' => 'Generate Keys',
'green interface' => 'Green Interface',
'grouptype' => 'Grouptype:',
'guaranteed bandwith' => 'Guaranteed bandwith',
-'guardian alertfile' => 'Alertfile',
-'guardian configuration' => 'Guardian Configuration',
-'guardian ignorefile' => 'Ignorefile',
-'guardian interface' => 'Interface',
-'guardian logfile' => 'Logfile',
-'guardian timelimit' => 'Timelimit',
+'guardian' => 'Guardian',
'guest ok' => 'allow guests to access',
'gui settings' => 'GUI Settings',
'gz with key' => 'Only an encrypted archive can be restored on this machine.',
'hosts config changed' => 'Hosts config changed',
'hour' => 'Hour',
'hour-graph' => 'Hour',
-'hours' => 'hours',
+'hours' => 'Hours',
'hours2' => 'Hours',
'ibod for dual isdn only' => 'iBOD can only be used with Dual ISDN.',
'icmp selected but no type' => 'ICMP selected for protocol, but no ICMP type specified.',
'idle' => 'Idle',
'idle timeout' => 'Idle timeout (mins; 0 to disable):',
'idle timeout not set' => 'Idle timeout not set.',
-'ids log viewer' => 'IDS log viewer',
-'ids logs' => 'IDS Logs',
-'ids preprocessor' => 'IDS preprocessor',
-'ids rules license' => 'To utilize Sourcefire VRT Certified Rules, you need to register on',
-'ids rules license1' => '.',
-'ids rules license2' => 'Acknowledge the license, activate your account by visiting the url you got via mail. Then go to',
-'ids rules license3' => 'press the "Generate code"-button and copy the 40 character Oinkcode into the field below.',
-'ids rules update' => 'Snort rules update',
+'ids apply' => 'Apply',
+'ids apply ruleset changes' => 'The ruleset changes are being applied. Please wait until all operations have completed successfully...',
+'ids automatic rules update' => 'Automatic Rule Update',
+'ids download new ruleset' => 'Downloading and unpacking new ruleset. Please wait until all operations have completed successfully...',
+'ids enable' => 'Enable Intrusion Prevention System',
+'ids hide' => 'Hide',
+'ids ignored hosts' => 'Whitelisted Hosts',
+'ids log hits' => 'Total of number of activated rules for',
+'ids log viewer' => 'IPS Log Viewer',
+'ids logs' => 'IPS Logs',
+'ids monitor traffic only' => 'Monitor traffic only',
+'ids monitored interfaces' => 'Monitored Interfaces',
+'ids no network zone' => 'Please select at least one network zone to be monitored',
+'ids no ruleset available' => 'No ruleset is available. Please download one first',
+'ids oinkcode required' => 'The selected ruleset requires a subscription or an Oinkcode',
+'ids rules update' => 'Ruleset',
+'ids ruleset autoupdate in progress' => 'Ruleset update in progress. Please wait until all operations have completed successfully...',
+'ids ruleset settings' => 'Ruleset Settings',
+'ids show' => 'Show',
+'ids working' => 'Changes are being applied. Please wait until all operations have completed successfully...',
'iface' => 'Iface',
'ignore filter' => 'Ignore filter',
'ike encryption' => 'IKE Encryption:',
'instant update' => 'Instant Update',
'integrity' => 'Integrity:',
'interface' => 'Interface',
+'interface mode' => 'Interface',
'interfaces' => 'Interfaces',
'internet' => 'INTERNET',
-'intrusion detection' => 'Intrusion Detection',
-'intrusion detection system' => 'Intrusion Detection System',
-'intrusion detection system log viewer' => 'Intrusion Detection System Log Viewer',
-'intrusion detection system rules' => 'intrusion detection system rules',
-'intrusion detection system2' => 'Intrusion Detection System:',
+'intrusion detection' => 'Intrusion Prevention',
+'intrusion detection system' => 'Intrusion Prevention System',
+'intrusion detection system log viewer' => 'Intrusion Prevention System Log Viewer',
+'intrusion detection system rules' => 'Ruleset',
+'intrusion detection system2' => 'Intrusion Prevention System',
+'intrusion prevention system' => 'Intrusion Prevention System',
'invalid broadcast ip' => 'Invalid broadcast IP',
'invalid cache size' => 'Invalid cache size.',
'invalid characters found in pre-shared key' => 'Invalid characters found in pre-shared key.',
'invalid input for esp keylife' => 'Invalid input for ESP Keylife',
'invalid input for hostname' => 'Invalid input for hostname.',
'invalid input for ike lifetime' => 'Invalid input for IKE lifetime',
+'invalid input for inactivity timeout' => 'Invalid input for Inactivity Timeout',
+'invalid input for interface address' => 'Invalid input for interface address',
+'invalid input for interface mode' => 'Invalid input for interface mode',
+'invalid input for interface mtu' => 'Invalid input to interface MTU',
'invalid input for keepalive 1' => 'Invalid input for Keepalive ping',
'invalid input for keepalive 1:2' => 'Invalid input for Keepalive use at least a ratio of 1:2',
'invalid input for keepalive 2' => 'Invalid input for Keepalive ping-restart',
+'invalid input for local ip address' => 'Invalid input for local IP address',
'invalid input for max clients' => 'Invalid input for Max Clients',
+'invalid input for mode' => 'Invalid input for mode',
'invalid input for name' => 'Invalid input for user\'s full name or system hostname',
'invalid input for oink code' => 'Invalid input for Oink code',
'invalid input for organization' => 'Invalid input for organization',
'invalid input for state or province' => 'Invalid input for state or province.',
'invalid input for valid till days' => 'Invalid input for Valid till (days).',
'invalid ip' => 'Invalid IP Address',
+'invalid ip or hostname' => 'Invalid IP Address or Hostname',
'invalid keep time' => 'Keep time must be a valid number',
'invalid key' => 'Invalid key.',
'invalid loaded file' => 'Invalid loaded file',
'invalid local-remote id' => 'local & remote id must not be equal and begin with a "@" sign. These are leftid and rightid in strongswan terminology.',
'invalid logserver address' => 'Invalid syslogd server address',
+'invalid logserver protocol' => 'Invalid syslogd server protocol',
'invalid mac address' => 'Invalid MAC address',
'invalid max lease time' => 'Invalid max lease time.',
'invalid maximum incoming size' => 'Invalid maximum incoming size.',
'ipfires hostname' => 'IPFire\'s Hostname',
'ipinfo' => 'IP info',
'ipsec' => 'IPsec',
+'ipsec connection' => 'IPsec Connection',
+'ipsec interface mode gre' => 'GRE',
+'ipsec interface mode none' => '- None (Default) -',
+'ipsec interface mode vti' => 'VTI',
+'ipsec mode transport' => 'Transport',
+'ipsec mode tunnel' => 'Tunnel',
'ipsec network' => 'IPsec network',
'ipsec no connections' => 'No active IPsec connections',
+'ipsec settings' => 'IPsec Settings',
'iptable rules' => 'IPTable rules',
'iptmangles' => 'IPTable Mangles',
'iptnats' => 'IPTable Network Address Translation',
'load printer' => 'Load Printer',
'loaded modules' => 'Loaded modules:',
'local hard disk' => 'Hard disk',
+'local ip address' => 'Local IP Address',
'local master' => 'Local Master',
'local ntp server specified but not enabled' => 'Local NTP server specified but not enabled',
'local subnet' => 'Local subnet:',
'log level' => 'Log Level',
'log lines per page' => 'Lines per page',
'log server address' => 'Syslog server:',
+'log server protocol' => 'protocol:',
'log settings' => 'Log Settings',
'log summaries' => 'Log summaries',
'log summary' => 'Log Summary',
'monthly volume' => 'Monthly volume',
'monthly volume start day' => 'First day of monthly period',
'monthly volume start day short' => 'First day',
-'months' => 'months',
+'months' => 'Months',
'more' => 'more',
'most preferred' => 'most preferred',
'mount' => 'Mount',
'mpfire search' => 'MPFire Search',
'mpfire songs' => 'MPFire songlist',
'mpfire webradio' => 'MPFire Webradio',
+'mtu' => 'MTU',
'mtu QoS' => 'This does not change the global MTU, it only sets MTU for QoS.',
'my new share' => 'My new share',
'name' => 'Name',
'nonetworkname' => 'No Network Name entered',
'noservicename' => 'No Service Name entered',
'not a valid ca certificate' => 'Not a valid CA certificate.',
-'not a valid dh key' => 'Not a valid Diffie-Hellman parameters file. Please use a length of 1024, 2048, 3072 or 4096 bits and the PKCS#3 format.',
+'not a valid dh key' => 'Not a valid Diffie-Hellman parameters file. Please use a length of 2048, 3072 or 4096 bits and the PKCS#3 format.',
'not enough disk space' => 'Not enough disk space',
'not present' => '<b>Not</b> present',
'not running' => 'not running',
'ok' => 'OK',
'older' => 'Older',
'on' => 'on',
+'one hour' => 'One Hour',
+'one month' => 'One Month',
+'one week' => 'One Week',
+'one year' => 'One Year',
'online help en' => 'Online help (in english)',
'only digits allowed in holdoff field' => 'Only digits allowed in holdoff field',
'only digits allowed in max retries field' => 'Only digits allowed in max retries field.',
'ovpn engines' => 'Crypto engine',
'ovpn errmsg green already pushed' => 'Route for green network is always set',
'ovpn errmsg invalid ip or mask' => 'Invalid network-address or subnetmask',
-'ovpn generating the root and host certificates' => 'Generating the root and host certifictae can take a long time.',
+'ovpn error dh' => 'The Diffie-Hellman parameter needs to be in minimum 2048 bit! <br>Please generate or upload a new Diffie-Hellman parameter, this can be made below in the section "Diffie-Hellman parameters options".</br>',
+'ovpn error md5' => 'You host certificate uses MD5 for the signature which is not accepted anymore. <br>Please update to the latest IPFire version and generate a new root and host certificate.</br><br>All OpenVPN clients needs then to be renewed!</br>',
+'ovpn generating the root and host certificates' => 'Generating the root and host certificate can take a long time.',
'ovpn ha' => 'Hash algorithm',
'ovpn hmac' => 'HMAC options',
'ovpn log' => 'OVPN-Log',
'ovpn subnet' => 'OpenVPN subnet:',
'ovpn subnet is invalid' => 'OpenVPN subnet is invalid.',
'ovpn subnet overlap' => 'OpenVPN Subnet overlaps with : ',
+'ovpn warning rfc3280' => 'Your host certificate is not RFC3280 compliant. <br>Please update to the latest IPFire version and generate as soon as possible a new root and host certificate.</br><br>All OpenVPN clients needs then to be renewed!</br>',
'ovpn_fastio' => 'Fast-IO',
'ovpn_mssfix' => 'MSSFIX Size',
'ovpn_mtudisc' => 'MTU-Discovery',
'proxy reports today' => 'Today',
'proxy reports weekly' => 'Weekly reports',
'psk' => 'PSK',
+'ptr' => 'PTR',
'pulse' => 'Pulse',
'pulse dial' => 'Pulse dial:',
'qos add subclass' => 'Add subclass',
'quick playlist' => 'Quick Playlist',
'ram' => 'RAM',
'random number generator daemon' => 'Random Number Generator Daemon',
+'rdns' => 'rDNS',
'read bytes' => 'Read Bytes',
'read list' => 'list with readonly hosts',
'real address' => 'Real Address',
'refresh' => 'Refresh',
'refresh index page while connected' => 'Refresh index.cgi page while connected',
'refresh update list' => 'Refresh update list',
-'registered user rules' => 'Sourcefire VRT rules for registered users',
+'registered user rules' => 'Talos VRT rules for registered users',
'released' => 'Released',
'reload' => 'reload',
'remark' => 'Remark',
'restore settings' => 'Reset Settings',
'reverse sort' => 'Sort in reverse chronological order',
'root' => 'Root',
-'root certificate' => 'Root certificate',
+'root certificate' => 'Root Certificate',
'root path' => 'Root path',
'root user password' => 'Root password',
'route subnet is invalid' => 'Additional push route subnet is invalid',
'rsvd dst port overlap' => 'Destination Port Range overlaps a port reserved for IPFire:',
'rsvd src port overlap' => 'Source Port Range overlaps a port reserved for IPFire:',
'rules already up to date' => 'Rules already up to date',
+'runmode' => 'Runmode',
'running' => 'RUNNING',
'safe removal of umounted device' => 'You can safely remove the unmounted device',
'samba' => 'Samba',
'smtphost' => 'SMTP host',
'smtpport' => 'SMTP port',
'snat new source ip address' => 'New source IP address',
-'snort hits' => 'Total of number of Intrusion rules activated for',
-'snort working' => 'Snort is working ... Please wait until all operations have completed successfully.',
'socket options' => 'Socket options',
'software version' => 'Software Version',
'sort ascending' => 'Sort ascending',
'ssdmz pinholes' => 'DMZ Pinholes',
'ssh' => 'SSH',
'ssh access' => 'SSH Access',
-'ssh access tip' => 'IPFire SSH is not using default port 222!',
+'ssh access tip' => 'IPFire SSH is not using default port 22!',
+'ssh active sessions' => 'Active logins',
+'ssh agent forwarding' => 'Allow SSH Agent Forwarding',
'ssh fingerprint' => 'Fingerprint',
'ssh host keys' => 'SSH Host Keys',
'ssh is disabled' => 'SSH is disabled. Stopping.',
'ssh key' => 'Key',
'ssh key size' => 'Size (bits)',
'ssh keys' => 'Allow public key based authentication',
+'ssh login time' => 'Logged in since',
+'ssh no active logins' => 'No active logins',
'ssh no auth' => 'You have not allowed any authentication methods; this will stop you logging in',
'ssh passwords' => 'Allow password based authentication',
-'ssh port' => 'SSH port set to 22 (default is 222)',
+'ssh port' => 'Set SSH port to default 22 (222 is used otherwise)',
'ssh portfw' => 'Allow TCP forwarding',
'ssh tempstart15' => 'Stop SSH demon in 15 minutes',
'ssh tempstart30' => 'Stop SSH demon in 30 minutes',
+'ssh username' => 'Username',
'ssh1 disabled' => 'SSHv1 is disabled, a version 2 client will be required.',
'ssh1 enabled' => 'SSHv1 is enabled, old clients will be supported.',
'ssh1 support' => 'Support SSH protocol version 1 (required only for old clients)',
'subject warn' => 'Warning - warnlevel reached',
'subnet' => 'Subnet',
'subnet is invalid' => 'Netmask is invalid',
-'subscripted user rules' => 'Sourcefire VRT rules with subscription',
+'subnet mask' => 'Subnet Mask',
+'subscripted user rules' => 'Talos VRT rules with subscription',
'successfully refreshed updates list' => 'Successfully refreshed updates list.',
'summaries kept' => 'Keep summaries for',
'sunday' => 'Sunday',
'system has hwrng' => 'This system has a hardware random number generator.',
'system has rdrand' => 'This system has support for Intel(R) RDRAND.',
'system information' => 'System Information',
+'system is offline' => 'The system is offline.',
'system log viewer' => 'System Log Viewer',
'system logs' => 'System Logs',
'system status information' => 'System Status Information',
'ta key' => 'TLS-Authentification-Key',
+'tcp more reliable' => 'TCP (more reliable)',
'telephone not set' => 'Telephone not set.',
'template' => 'Preset',
'template warning' => 'You have two options to set up Qos. The First, you press the save button and generate the classes and rules on your own. The second, you press the preset button and classes and rules will be set up by a template.',
+'ten minutes' => '10 Minutes',
'teovpn_fragment' => 'Fragmentsize',
'test' => 'test',
'test email could not be sent' => 'Could not sent Testemail',
'there are updates' => 'There are updates available for your system. Please go to the "updates" section for more information.',
'there are updates available' => 'There are updates available for your system. It is strongly urged that you install them as soon as possible.',
'there was no file upload' => 'There was no file upload.',
+'thirty minutes' => '30 Minutes',
'this feature has been sponsored by' => 'This feature has been sponsored by',
'this is not a valid archive' => 'This is not a valid archive.',
'this is not an authorised update' => 'This is not an authorised update.',
'trafficto' => 'To',
'transfer limits' => 'Transfer limits',
'transparent on' => 'Transparent on',
+'transport mode does not support vti' => 'VTI is not support in transport mode',
'tripwire' => 'Tripwire',
'tripwire cronjob' => 'tripwire cronjob',
'tripwire functions' => 'tripwire functions',
'tripwirewarningkeys' => 'WARNING - This will erase your current keys, config, and database and generate them new.',
'tripwirewarningpolicy' => 'WARNING - Your policy will be rebuild, after that your database will be reinitalised. Therefor the site-key and the local-key are neeeded.',
'tuesday' => 'Tuesday',
+'twelve hours' => '12 Hours',
+'two weeks' => 'Two Weeks',
'type' => 'Type',
+'udp less overhead' => 'UDP (less overhead)',
'umount' => 'Umount',
'umount removable media before to unplug' => 'Umount removable media before unplugging the device',
'unable to alter profiles while red is active' => 'Unable to alter profiles while RED is active.',
'unix password sync' => 'Unix Password Sync',
'unix shell' => 'UNIX Shell',
'unknown' => 'UNKNOWN',
+'unlimited' => 'Unlimited',
'unnamed' => 'Unnamed',
'update' => 'Update',
'update accelerator' => 'Update Accelerator',
+'update ruleset' => 'Update ruleset',
'update time' => 'Update the time:',
'update transcript' => 'Update transcript',
'updatedatabase' => 'Update Database with last report',
'updxlrtr maintenance' => 'Maintenance',
'updxlrtr marked as' => 'marked as',
'updxlrtr max disk usage' => 'Max. disk usage',
-'updxlrtr max download rate' => 'Max. external download rate (kBit/s)',
+'updxlrtr max download rate' => 'Max. external download rate (kbit/s)',
'updxlrtr month' => 'one month',
'updxlrtr monthly' => 'monthly',
'updxlrtr not accessed' => 'not accessed since',
'updxlrtr year' => 'one year',
'upgrade' => 'upgrade',
'uplink' => 'Uplink',
+'uplink bit rate' => 'Uplink Bit Rate',
'uplink speed' => 'Uplink speed (kbit/sec)',
'uplink std class' => 'uplink standard class',
'upload' => 'Upload',
'vpn aggrmode' => 'IKE aggressive mode allowed. Avoid if possible (preshared key is transmitted in clear text)!',
'vpn altname syntax' => 'SubjectAltName is a comma separated list of e-mail, dns, uri, rid and ip objects.<br />email:an email address. Syntax email:copy takes the email field from the cert to be used.<br />DNS:a valid domain name.<br />URI:any valid uri.<br />RID:registered object identifier.<br />IP:an IP address.<br />Note:charset is limited and case is significant.<br />Example:<br /><b>e-mail:</b>ipfire@foo.org<b>,email:</b>copy<b>,DNS:</b>www.ipfire.org<b>,IP:</b>127.0.0.1<b>,URI:</b>http://url/to/something',
'vpn auth-dn' => 'Peer is identified by either IPV4_ADDR, FQDN, USER_FQDN or DER_ASN1_DN string in remote ID field',
+'vpn broken' => 'Broken',
'vpn configuration main' => 'VPN Configuration',
+'vpn connecting' => 'CONNECTING',
'vpn delayed start' => 'Delay before launching VPN (seconds)',
'vpn delayed start help' => 'If required, this delay can be used to allow dynamic DNS updates to propagate properly. 60 is a common value when RED is a dynamic IP.',
'vpn force mobike' => 'Force using MOBIKE (only IKEv2)',
+'vpn inactivity timeout' => 'Inactivity Timeout',
'vpn incompatible use of defaultroute' => 'hostname=%defaultroute not allowed',
'vpn keyexchange' => 'Keyexchange',
'vpn local id' => 'Local ID',
'vpn on blue' => 'VPN on BLUE',
'vpn on green' => 'VPN on GREEN',
'vpn on orange' => 'VPN on ORANGE',
+'vpn on-demand' => 'ON-DEMAND',
'vpn payload compression' => 'Negotiate payload compression',
'vpn red name' => 'Public IP or FQDN for RED interface or <%defaultroute>',
'vpn remote id' => 'Remote ID',
-'vpn statistic n2n' => 'OpenVPN Net-to-Net Statistics',
-'vpn statistic rw' => 'OpenVPN Roadwarrior Statistics',
+'vpn start action' => 'Start Action',
+'vpn start action add' => 'Wait for connection initiation',
+'vpn start action route' => 'On Demand',
+'vpn start action start' => 'Always On',
+'vpn statistic n2n' => 'VPN: Net-to-Net Statistics',
+'vpn statistic rw' => 'VPN: Roadwarrior Statistics',
'vpn subjectaltname' => 'Subject Alt Name',
+'vpn wait' => 'WAITING',
'vpn watch' => 'Restart net-to-net vpn when remote peer IP changes (dyndns).',
+'vpn weak' => 'Weak',
'waiting to synchronize clock' => 'Waiting to synchronize clock',
'warn when traffic reaches' => 'Warn when traffic reaches x %',
'warning messages' => 'Warning messages',
'week' => 'Week',
'week-graph' => 'Week',
'weekly firewallhits' => 'weekly firewallhits',
-'weeks' => 'weeks',
+'weeks' => 'Weeks',
'wildcards' => 'Wildcards',
'wins server' => 'Wins Server',
'wins support' => 'Wins Support',
'wireless config added' => 'Wireless config added',
'wireless config changed' => 'Wireless config changed',
'wireless configuration' => 'Wireless Configuration',
+'wireless network' => 'WiFi Network',
'wlan client' => 'Wireless client',
'wlan client advanced settings' => 'Advanced settings',
'wlan client and' => 'and',
+'wlan client anonymous identity' => 'Anonymous Identity',
+'wlan client auth auto' => 'Auto',
+'wlan client auth peap' => 'PEAP',
+'wlan client auth ttls' => 'TTLS',
+'wlan client authentication settings' => 'Authentication Settings',
'wlan client bssid' => 'BSSID',
'wlan client ccmp' => 'CCMP',
'wlan client configuration' => 'Wireless Client Configuration',
'wlan client disconnected' => 'Disconnected',
'wlan client duplicate ssid' => 'Duplicate SSID',
+'wlan client eap authentication method' => 'EAP Authentication Method',
+'wlan client eap phase2 method' => 'EAP Phase 2 Method',
+'wlan client eap state' => 'EAP Status',
'wlan client edit entry' => 'Edit wireless client configuration',
'wlan client encryption' => 'Encryption',
+'wlan client encryption eap' => 'EAP',
'wlan client encryption none' => 'None',
'wlan client encryption wep' => 'WEP',
'wlan client encryption wpa' => 'WPA',
'wlan client encryption wpa2' => 'WPA2',
'wlan client group cipher' => 'Group cipher',
'wlan client group key algorithm' => 'GKA',
+'wlan client identity' => 'Identity',
'wlan client invalid key length' => 'Invalid key length.',
+'wlan client method' => 'Method',
'wlan client new entry' => 'Create new wireless client configuration',
'wlan client new network' => 'New network',
'wlan client pairwise cipher' => 'Pairwise cipher',
'wlan client pairwise key algorithm' => 'PKA',
'wlan client pairwise key group key' => 'Pairwise key/group key',
+'wlan client password' => 'Password',
'wlan client psk' => 'Pre-shared key',
'wlan client ssid' => 'SSID',
'wlan client tkip' => 'TKIP',
+'wlan client tls cipher' => 'TLS Cipher',
+'wlan client tls version' => 'TLS Version',
'wlan client wpa mode' => 'WPA mode',
'wlan client wpa mode all' => 'Auto',
'wlan client wpa mode ccmp ccmp' => 'CCMP-CCMP',
'wlan client wpa mode ccmp tkip' => 'CCMP-TKIP',
'wlan client wpa mode tkip tkip' => 'TKIP-TKIP',
'wlan clients' => 'Wireless clients',
-'wlanap access point' => 'Access Point',
+'wlanap' => 'Access Point',
+'wlanap auto' => 'Automatic Channel Selection',
+'wlanap broadcast ssid' => 'Broadcast SSID',
'wlanap channel' => 'Channel',
+'wlanap client isolation' => 'Client Isolation',
+'wlanap configuration' => 'Access Point Configuration',
'wlanap country' => 'Country Code',
'wlanap debugging' => 'Debugging',
'wlanap del interface' => 'Remove selected interface?',
'wlanap invalid wpa' => 'Invalid length in WPA Passphrase. Must be between 8 and 63 characters.',
'wlanap link dhcp' => 'Wireless lan DHCP configuration',
'wlanap link wireless' => 'Activate wireless lan clients',
+'wlanap management frame protection' => 'Management Frame Protection (802.11w)',
+'wlanap neighbor scan' => 'Neighborhood scan',
+'wlanap neighbor scan warning' => 'Warning! Disabling may violate regulatory rules!',
'wlanap no interface' => 'Selected interface is not a wirless lan card!',
'wlanap none' => 'none',
'wlanap notifications' => 'Notifications',
'wlanap select interface' => 'Please select the wireless lan interface.',
+'wlanap ssid' => 'SSID',
'wlanap verbose' => 'Verbose',
'wlanap warnings' => 'Warnings',
'wlanap wlan card' => 'WLan Card',
'you can only define one roadwarrior connection when using pre-shared key authentication' => 'You can only define one Roadwarrior connection when using pre-shared key authentication.<br />Either you already have a Roadwarrior connection with pre-shared key authentication, or you\'re trying to add one now.',
'your department' => 'Your department',
'your e-mail' => 'Your e-mail address',
+'zoneconf access native' => 'Native',
+'zoneconf access none' => 'None',
+'zoneconf access vlan' => 'VLAN',
+'zoneconf nic assignment' => 'NIC Assignment',
+'zoneconf nicmode bridge' => 'Bridge',
+'zoneconf nicmode default' => 'Default',
+'zoneconf nicmode macvtap' => 'MacVTtap',
+'zoneconf title' => 'Zone Configuration',
+'zoneconf val native assignment error' => 'A NIC cannot be accessed natively by more than one zone.',
+'zoneconf val ppp assignment error' => 'The NIC used for RED in PPP mode cannot be accessed by any other zone.',
+'zoneconf val vlan amount assignment error' => 'A zone cannot have more than one VLAN assigned.',
+'zoneconf val vlan tag assignment error' => 'You cannot use the same VLAN tag more than once per NIC.',
);
#EOF
projects / ipfire-2.x.git / blobdiff