Update madwifi to r4003 and switch hal to test-hal

[ipfire-2.x.git] / src / initscripts / init.d / hostapd

diff --git a/src/initscripts/init.d/hostapd b/src/initscripts/init.d/hostapd
index 271aaab926e59df9269458dedd49f3c94400669f..aa5e13d37a092d16d973d33228d7a81530a95c08 100644 (file)
--- a/src/initscripts/init.d/hostapd
+++ b/src/initscripts/init.d/hostapd
@@ -2,41 +2,81 @@
 . /etc/sysconfig/rc
 . ${rc_functions}
 
+CHANNEL="05"
+TXPOWER="auto"
+INTERFACE="blue0"
+MACMODE="0"
+DRIVER="MADWIFI"
+
+eval $(/usr/local/bin/readhash /var/ipfire/wlanap/settings)
+
 case "${1}" in
-        start)
-               boot_mesg -n "Starting hostapd... "
+       start)
                mkdir -p /var/run/hostapd
-               # enable wlan module of collectd
-               sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
-                /usr/bin/wlanconfig ath0 destroy
-                /usr/bin/wlanconfig blue0 create wlandev wifi0 wlanmode ap
-                /usr/sbin/iwconfig blue0 channel 05
-                /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
-                evaluate_retval
-                ;;
-
-        stop)
+
+               if [ "$DRIVER" == "MADWIFI" ]; then
+                       if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+                               boot_mesg "Setting MADWIFI wlan $INTERFACE to Master mode... "
+                               # Set Atheros Cards to master mode
+                               /usr/bin/wlanconfig $INTERFACE destroy > /dev/null
+                               /usr/bin/wlanconfig $INTERFACE create wlandev wifi0 wlanmode ap > /dev/null
+                       fi
+               fi
+
+               boot_mesg "Starting hostapd... "
+               /usr/sbin/iwconfig $INTERFACE channel $CHANNEL
+               /usr/sbin/iwconfig $INTERFACE txpower $TXPOWER
+               /usr/bin/hostapd -P /var/run/hostapd /etc/hostapd.conf </dev/tty12 >/dev/tty12 2>&1 &
+
+               if [ $DRIVER == "MADWIFI" ]; then
+
+                       iwpriv $INTERFACE maccmd 3
+                       if [ $MACMODE != 0 ]; then
+                               FILE="/var/ipfire/wlanap/macfile"
+                               exec < $FILE
+                               while read LINE
+                               do
+                                       iwpriv $INTERFACE addmac $LINE
+                               done
+
+                               iwpriv $INTERFACE maccmd $MACMODE
+                       fi
+                       # Disable background scann
+                       iwpriv $INTERFACE bgscan 0
+                       # Set beacon interval to 500
+                       iwpriv $INTERFACE bintval 500
+               fi
+
+               if [ "$(/usr/sbin/iwconfig $INTERFACE | /bin/grep "Mode:Master")" == "" ]; then
+                       boot_mesg "Error! Can't set wlan master mode"
+                       echo_failure;
+                       exit 0;
+               else
+                       # enable wlan module of collectd
+                       sed -i -e "s|#LoadPlugin wireless|LoadPlugin wireless|g" /etc/collectd.conf
+                       echo_ok
+               fi
+               ;;
+
+       stop)
                boot_mesg "Stopping hostapd..."
-                # Just make sure when going down the first time blue0 nw values are ignored
-               grep -v 'NAME="blue0"' /etc/udev/rules.d/30-persistent-network.rules > /tmp/30-persistent-network.rules
-               mv /tmp/30-persistent-network.rules /etc/udev/rules.d/30-persistent-network.rules
-               /usr/bin/wlanconfig blue0 destroy
-                killproc /usr/bin/hostapd
-                evaluate_retval
-                ;;
-
-        restart)
-                ${0} stop
-                sleep 1
-                ${0} start
-                ;;
-
-        status)
-                statusproc /usr/bin/hostapd
-                ;;
-
-        *)
-                echo "Usage: ${0} {start|stop|restart|status}"
-                exit 1
-                ;;
+
+               killproc /usr/bin/hostapd
+               evaluate_retval
+               ;;
+
+       restart)
+               ${0} stop
+               sleep 1
+               ${0} start
+               ;;
+
+       status)
+               statusproc /usr/bin/hostapd
+               ;;
+
+       *)
+               echo "Usage: ${0} {start|stop|restart|status}"
+               exit 1
+               ;;
 esac