partresize: check for apu only if dmi is present

[ipfire-2.x.git] / src / initscripts / system / partresize

diff --git a/src/initscripts/system/partresize b/src/initscripts/system/partresize
index 2fad11251e31cf3defab89d082736ff674355b61..040c6c3690e379c43c4fccfeda144a64e4872cbe 100644 (file)
--- a/src/initscripts/system/partresize
+++ b/src/initscripts/system/partresize
@@ -3,6 +3,8 @@
 # Begin $rc_base/init.d/partresize
 #
 # Description : Resize the root partition to the drivesize
+#              and setup some platform or hardware options in
+#              flashimage
 #
 # Authors     : Arne Fitzenreiter - arne_f@ipfire.org
 #
@@ -29,10 +31,37 @@ case "${1}" in
                        (exit ${failed})
                        evaluate_retval
 
+                       # check if serial console enabled
+                       scon="off";
+                       if [ ! "$(grep "console=ttyS0" /proc/cmdline)" == "" ]; then
+                               scon="on";
+                       fi
+                       if [ -e /sys/class/dmi/id/product_name ]; then
+                               IFS= read -r DMI_PRODUCT_NAME < /sys/class/dmi/id/product_name;
+                               case ${DMI_PRODUCT_NAME} in
+                                       APU|apu[1-4]|PC\ Engines\ apu[1-4] )
+                                                       scon="on";
+                                               ;;
+                               esac
+                       fi
+
+                       # Enable the serial console on all systems on Azure
+                       if running_on_azure; then
+                               scon="on"
+                       fi
+
+                       # Install AP6112 wlan config on NanoPi R1
+                       case "$(< /proc/device-tree/model )" in
+                               "FriendlyElec NanoPi-R1")
+                                       cp -f   /lib/firmware/brcm/brcmfmac43430-sdio.AP6212.txt \
+                                               /lib/firmware/brcm/brcmfmac43430-sdio.txt
+                               ;;
+                       esac 2>/dev/null
+
                        mount /boot > /dev/null
                        if [ -e /boot/grub/grub.cfg ]; then
                                # swtich permanent to serial console if it was selected on first boot
-                               if [ ! "$(grep "console=ttyS0" /proc/cmdline)" == "" ]; then
+                               if [ "${scon}" = "on" ]; then
                                        # Enable also serial console on GRUB
                                        echo "GRUB_TERMINAL=\"serial console\"" >> /etc/default/grub
                                        echo "GRUB_SERIAL_COMMAND=\"serial --unit=0 --speed=115200\"" >> /etc/default/grub