kernel/config-armv5tel-kirkwood

   1 CONFIG_ARCH_HAS_CPUFREQ=y
   2
   3 #
   4 # IRQ subsystem
   5 #
   6 CONFIG_GENERIC_IRQ_CHIP=y
   7
   8 #
   9 # System Type
  10 #
  11 # CONFIG_ARCH_VERSATILE is not set
  12 CONFIG_ARCH_KIRKWOOD=y
  13
  14 #
  15 # Marvell Kirkwood Implementations
  16 #
  17 CONFIG_KIRKWOOD_LEGACY=y
  18 CONFIG_MACH_D2NET_V2=y
  19 CONFIG_MACH_NET2BIG_V2=y
  20 CONFIG_MACH_NET5BIG_V2=y
  21 CONFIG_MACH_OPENRD=y
  22 CONFIG_MACH_OPENRD_BASE=y
  23 CONFIG_MACH_OPENRD_CLIENT=y
  24 CONFIG_MACH_OPENRD_ULTIMATE=y
  25 CONFIG_MACH_RD88F6192_NAS=y
  26 CONFIG_MACH_RD88F6281=y
  27 CONFIG_MACH_T5325=y
  28 CONFIG_MACH_TS219=y
  29 CONFIG_MACH_TS41X=y
  30
  31 #
  32 # Device tree entries
  33 #
  34 CONFIG_ARCH_KIRKWOOD_DT=y
  35 CONFIG_MACH_MV88F6281GTW_GE_DT=y
  36 CONFIG_PLAT_ORION=y
  37 CONFIG_PLAT_ORION_LEGACY=y
  38
  39 #
  40 # Processor Type
  41 #
  42 CONFIG_CPU_FEROCEON=y
  43 # CONFIG_CPU_FEROCEON_OLD_ID is not set
  44 CONFIG_CPU_ABRT_EV5T=y
  45 CONFIG_CPU_COPY_FEROCEON=y
  46 CONFIG_CPU_TLB_FEROCEON=y
  47
  48 #
  49 # Processor Features
  50 #
  51 CONFIG_OUTER_CACHE=y
  52 CONFIG_CACHE_FEROCEON_L2=y
  53 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
  54
  55 #
  56 # PCI host controller drivers
  57 #
  58 CONFIG_PCI_MVEBU=y
  59
  60 #
  61 # Boot options
  62 #
  63 CONFIG_ARM_ATAG_DTB_COMPAT=y
  64 CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
  65 # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
  66
  67 #
  68 # CPU Frequency scaling
  69 #
  70 CONFIG_CPU_FREQ=y
  71 CONFIG_CPU_FREQ_TABLE=y
  72 CONFIG_CPU_FREQ_GOV_COMMON=y
  73 CONFIG_CPU_FREQ_STAT=m
  74 CONFIG_CPU_FREQ_STAT_DETAILS=y
  75 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
  76 # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
  77 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
  78 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
  79 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
  80 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
  81 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
  82 CONFIG_CPU_FREQ_GOV_USERSPACE=m
  83 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
  84 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
  85
  86 #
  87 # ARM CPU frequency scaling drivers
  88 #
  89 CONFIG_ARM_KIRKWOOD_CPUFREQ=y
  90
  91 #
  92 # Bluetooth device drivers
  93 #
  94 CONFIG_RFKILL_REGULATOR=m
  95
  96 #
  97 # Bus devices
  98 #
  99 CONFIG_MVEBU_MBUS=y
 100
 101 #
 102 # Distributed Switch Architecture drivers
 103 #
 104 CONFIG_MV643XX_ETH=m
 105
 106 #
 107 # I2C system bus drivers (mostly embedded / system-on-chip)
 108 #
 109 CONFIG_I2C_MV64XXX=m
 110
 111 #
 112 # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
 113 #
 114 CONFIG_PINCTRL=y
 115
 116 #
 117 # Pin controllers
 118 #
 119 CONFIG_PINMUX=y
 120 CONFIG_PINCONF=y
 121 CONFIG_GENERIC_PINCONF=y
 122 # CONFIG_DEBUG_PINCTRL is not set
 123 CONFIG_PINCTRL_SINGLE=m
 124 CONFIG_PINCTRL_MVEBU=y
 125 CONFIG_PINCTRL_KIRKWOOD=y
 126 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 127 CONFIG_GPIO_GENERIC=y
 128
 129 #
 130 # Memory mapped GPIO drivers:
 131 #
 132 CONFIG_GPIO_GENERIC_PLATFORM=y
 133 CONFIG_GPIO_MVEBU=y
 134
 135 #
 136 # SPI GPIO expanders:
 137 #
 138 CONFIG_GPIO_MCP23S08=m
 139
 140 #
 141 # 1-wire Slaves
 142 #
 143 # CONFIG_CHARGER_MANAGER is not set
 144 CONFIG_POWER_RESET_QNAP=y
 145
 146 #
 147 # Native drivers
 148 #
 149 CONFIG_CPU_THERMAL=y
 150 CONFIG_KIRKWOOD_THERMAL=m
 151
 152 #
 153 # Watchdog Device Drivers
 154 #
 155 CONFIG_ORION_WATCHDOG=m
 156
 157 #
 158 # Multifunction device drivers
 159 #
 160 CONFIG_REGULATOR=y
 161 # CONFIG_REGULATOR_DEBUG is not set
 162 # CONFIG_REGULATOR_DUMMY is not set
 163 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 164 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 165 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 166 # CONFIG_REGULATOR_AD5398 is not set
 167 CONFIG_REGULATOR_DA9210=m
 168 # CONFIG_REGULATOR_FAN53555 is not set
 169 # CONFIG_REGULATOR_GPIO is not set
 170 # CONFIG_REGULATOR_ISL6271A is not set
 171 # CONFIG_REGULATOR_LP3971 is not set
 172 # CONFIG_REGULATOR_LP3972 is not set
 173 CONFIG_REGULATOR_LP872X=m
 174 CONFIG_REGULATOR_LP8755=m
 175 # CONFIG_REGULATOR_MAX1586 is not set
 176 # CONFIG_REGULATOR_MAX8649 is not set
 177 # CONFIG_REGULATOR_MAX8660 is not set
 178 # CONFIG_REGULATOR_MAX8952 is not set
 179 # CONFIG_REGULATOR_MAX8973 is not set
 180 CONFIG_REGULATOR_PFUZE100=m
 181 # CONFIG_REGULATOR_TPS51632 is not set
 182 # CONFIG_REGULATOR_TPS62360 is not set
 183 # CONFIG_REGULATOR_TPS65023 is not set
 184 # CONFIG_REGULATOR_TPS6507X is not set
 185 CONFIG_REGULATOR_VEXPRESS=m
 186
 187 #
 188 # Frame buffer hardware drivers
 189 #
 190 # CONFIG_BACKLIGHT_PWM is not set
 191
 192 #
 193 # Console display driver support
 194 #
 195 CONFIG_SND_KIRKWOOD_SOC=m
 196 CONFIG_SND_KIRKWOOD_SOC_OPENRD=m
 197 CONFIG_SND_KIRKWOOD_SOC_T5325=m
 198 CONFIG_SND_SOC_ALC5623=m
 199 CONFIG_SND_SOC_CS42L51=m
 200
 201 #
 202 # USB Host Controller Drivers
 203 #
 204 CONFIG_USB_EHCI_HCD_ORION=y
 205
 206 #
 207 # MMC/SD/SDIO Host Controller Drivers
 208 #
 209 CONFIG_MMC_MVSDIO=m
 210
 211 #
 212 # LED drivers
 213 #
 214 CONFIG_LEDS_REGULATOR=m
 215 CONFIG_LEDS_NS2=m
 216 CONFIG_LEDS_NETXBIG=m
 217
 218 #
 219 # on-CPU RTC drivers
 220 #
 221 CONFIG_RTC_DRV_MV=m
 222
 223 #
 224 # DMA Devices
 225 #
 226 CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
 227 CONFIG_MV_XOR=y
 228
 229 #
 230 # Android
 231 #
 232 CONFIG_COMMON_CLK=y
 233
 234 #
 235 # Common Clock Framework
 236 #
 237 # CONFIG_COMMON_CLK_DEBUG is not set
 238 CONFIG_COMMON_CLK_SI5351=m
 239 CONFIG_MVEBU_CLK_COMMON=y
 240 CONFIG_KIRKWOOD_CLK=y
 241
 242 #
 243 # Hardware Spinlock drivers
 244 #
 245 CONFIG_ORION_TIMER=y
 246
 247 #
 248 # Rpmsg drivers
 249 #
 250 CONFIG_MVEBU_DEVBUS=y
 251
 252 #
 253 # Temperature sensors
 254 #
 255 CONFIG_ORION_IRQCHIP=y
 256
 257 #
 258 # Runtime Testing
 259 #
 260 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
 261 # CONFIG_DEBUG_UART_PL01X is not set
 262 CONFIG_DEBUG_UART_8250=y
 263 CONFIG_DEBUG_UART_PHYS=0xf1012000
 264 CONFIG_DEBUG_UART_VIRT=0xfed12000
 265 CONFIG_DEBUG_UART_8250_SHIFT=2
 266 # CONFIG_DEBUG_UART_8250_WORD is not set
 267 # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 268
 269 #
 270 # Random Number Generation
 271 #
 272 CONFIG_CRYPTO_DEV_MV_CESA=m
 273
 274 #
 275 # Library routines
 276 #
 277 CONFIG_RATIONAL=y