kernel/config-armv5tel-kirkwood

   1 CONFIG_ARCH_HAS_CPUFREQ=y
   2
   3 #
   4 # General setup
   5 #
   6 CONFIG_BROKEN_ON_SMP=y
   7
   8 #
   9 # IRQ subsystem
  10 #
  11 CONFIG_GENERIC_IRQ_CHIP=y
  12
  13 #
  14 # Timers subsystem
  15 #
  16 CONFIG_NO_HZ_IDLE=y
  17
  18 #
  19 # CPU/Task time and stats accounting
  20 #
  21 CONFIG_TICK_CPU_ACCOUNTING=y
  22 # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
  23 # CONFIG_IRQ_TIME_ACCOUNTING is not set
  24
  25 #
  26 # RCU Subsystem
  27 #
  28 CONFIG_TINY_RCU=y
  29 # CONFIG_RCU_STALL_COMMON is not set
  30
  31 #
  32 # System Type
  33 #
  34 # CONFIG_ARCH_MULTIPLATFORM is not set
  35 # CONFIG_ARCH_VERSATILE is not set
  36 CONFIG_ARCH_KIRKWOOD=y
  37
  38 #
  39 # Marvell Kirkwood Implementations
  40 #
  41 CONFIG_KIRKWOOD_LEGACY=y
  42 CONFIG_MACH_D2NET_V2=y
  43 CONFIG_MACH_NET2BIG_V2=y
  44 CONFIG_MACH_NET5BIG_V2=y
  45 CONFIG_MACH_OPENRD=y
  46 CONFIG_MACH_OPENRD_BASE=y
  47 CONFIG_MACH_OPENRD_CLIENT=y
  48 CONFIG_MACH_OPENRD_ULTIMATE=y
  49 CONFIG_MACH_RD88F6192_NAS=y
  50 CONFIG_MACH_RD88F6281=y
  51 CONFIG_MACH_T5325=y
  52 CONFIG_MACH_TS219=y
  53 CONFIG_MACH_TS41X=y
  54
  55 #
  56 # Device tree entries
  57 #
  58 CONFIG_ARCH_KIRKWOOD_DT=y
  59 CONFIG_MACH_MV88F6281GTW_GE_DT=y
  60 CONFIG_PLAT_ORION=y
  61 CONFIG_PLAT_ORION_LEGACY=y
  62
  63 #
  64 # Processor Type
  65 #
  66 CONFIG_CPU_FEROCEON=y
  67 # CONFIG_CPU_FEROCEON_OLD_ID is not set
  68 CONFIG_CPU_32v5=y
  69 CONFIG_CPU_ABRT_EV5T=y
  70 CONFIG_CPU_PABRT_LEGACY=y
  71 CONFIG_CPU_CACHE_VIVT=y
  72 CONFIG_CPU_COPY_FEROCEON=y
  73 CONFIG_CPU_TLB_FEROCEON=y
  74 CONFIG_CPU_USE_DOMAINS=y
  75
  76 #
  77 # Processor Features
  78 #
  79 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
  80 CONFIG_NEED_KUSER_HELPERS=y
  81 CONFIG_KUSER_HELPERS=y
  82 CONFIG_OUTER_CACHE=y
  83 CONFIG_CACHE_FEROCEON_L2=y
  84 # CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
  85 # CONFIG_CACHE_L2X0 is not set
  86 CONFIG_ARM_L1_CACHE_SHIFT=5
  87
  88 #
  89 # PCI host controller drivers
  90 #
  91 CONFIG_PCI_MVEBU=y
  92 CONFIG_PCCARD=m
  93 # CONFIG_PCMCIA is not set
  94 CONFIG_CARDBUS=y
  95
  96 #
  97 # PC-card bridges
  98 #
  99 CONFIG_YENTA=m
 100 CONFIG_YENTA_O2=y
 101 CONFIG_YENTA_RICOH=y
 102 CONFIG_YENTA_TI=y
 103 CONFIG_YENTA_ENE_TUNE=y
 104 CONFIG_YENTA_TOSHIBA=y
 105
 106 #
 107 # Kernel Features
 108 #
 109 CONFIG_ARCH_NR_GPIO=0
 110 CONFIG_SPLIT_PTLOCK_CPUS=999999
 111 # CONFIG_PHYS_ADDR_T_64BIT is not set
 112 CONFIG_ZONE_DMA_FLAG=0
 113 CONFIG_DEFAULT_MMAP_MIN_ADDR=32768
 114 CONFIG_NEED_PER_CPU_KM=y
 115 CONFIG_FORCE_MAX_ZONEORDER=11
 116 # CONFIG_UACCESS_WITH_MEMCPY is not set
 117
 118 #
 119 # Boot options
 120 #
 121 CONFIG_ARM_ATAG_DTB_COMPAT=y
 122 CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
 123 # CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
 124 CONFIG_CMDLINE="console=ttyAM0,115200 root=/dev/sda1 rootdelay=20"
 125 # CONFIG_XIP_KERNEL is not set
 126
 127 #
 128 # CPU Frequency scaling
 129 #
 130 CONFIG_CPU_FREQ=y
 131 CONFIG_CPU_FREQ_GOV_COMMON=y
 132 CONFIG_CPU_FREQ_STAT=m
 133 CONFIG_CPU_FREQ_STAT_DETAILS=y
 134 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
 135 # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 136 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 137 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 138 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 139 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 140 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 141 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 142 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 143 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 144
 145 #
 146 # ARM CPU frequency scaling drivers
 147 #
 148 CONFIG_ARM_KIRKWOOD_CPUFREQ=y
 149
 150 #
 151 # CPU Idle
 152 #
 153 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 154
 155 #
 156 # Bluetooth device drivers
 157 #
 158 CONFIG_RFKILL_REGULATOR=m
 159
 160 #
 161 # Generic Driver Options
 162 #
 163 # CONFIG_FIRMWARE_IN_KERNEL is not set
 164 CONFIG_REGMAP_I2C=m
 165
 166 #
 167 # Bus devices
 168 #
 169 CONFIG_MVEBU_MBUS=y
 170 # CONFIG_MTD is not set
 171
 172 #
 173 # Device Tree and Open Firmware support
 174 #
 175 CONFIG_PARPORT=m
 176 CONFIG_PARPORT_PC=m
 177 CONFIG_PARPORT_SERIAL=m
 178 # CONFIG_PARPORT_PC_FIFO is not set
 179 # CONFIG_PARPORT_PC_SUPERIO is not set
 180 # CONFIG_PARPORT_GSC is not set
 181 # CONFIG_PARPORT_AX88796 is not set
 182 CONFIG_PARPORT_1284=y
 183 CONFIG_PARPORT_NOT_PC=y
 184 # CONFIG_PARIDE is not set
 185 CONFIG_BLK_DEV_RAM_SIZE=16384
 186 # CONFIG_MG_DISK is not set
 187
 188 #
 189 # Misc devices
 190 #
 191 # CONFIG_SRAM is not set
 192
 193 #
 194 # SCSI Transports
 195 #
 196 CONFIG_SCSI_PPA=m
 197 CONFIG_SCSI_IMM=m
 198 # CONFIG_SCSI_IZIP_EPP16 is not set
 199 # CONFIG_SCSI_IZIP_SLOW_CTR is not set
 200
 201 #
 202 # PIO-only SFF controllers
 203 #
 204 # CONFIG_PATA_PLATFORM is not set
 205
 206 #
 207 # Distributed Switch Architecture drivers
 208 #
 209 CONFIG_VORTEX=m
 210 CONFIG_PCMCIA_XIRCOM=m
 211 CONFIG_MV643XX_ETH=m
 212
 213 #
 214 # MII PHY device drivers
 215 #
 216 # CONFIG_PLIP is not set
 217
 218 #
 219 # ISDN feature submodules
 220 #
 221 # CONFIG_ISDN_DRV_LOOP is not set
 222
 223 #
 224 # Input device support
 225 #
 226 # CONFIG_INPUT_FF_MEMLESS is not set
 227 CONFIG_INPUT_MATRIXKMAP=m
 228
 229 #
 230 # Input Device Drivers
 231 #
 232 # CONFIG_KEYBOARD_SAMSUNG is not set
 233 # CONFIG_MOUSE_GPIO is not set
 234
 235 #
 236 # Hardware I/O ports
 237 #
 238 # CONFIG_SERIO_PARKBD is not set
 239
 240 #
 241 # Non-8250 serial port support
 242 #
 243 CONFIG_SERIAL_SCCNXP=m
 244 CONFIG_SERIAL_ARC=m
 245 CONFIG_PRINTER=m
 246 CONFIG_LP_CONSOLE=y
 247 CONFIG_PPDEV=m
 248 CONFIG_I2C=m
 249 CONFIG_I2C_ALGOBIT=m
 250
 251 #
 252 # I2C system bus drivers (mostly embedded / system-on-chip)
 253 #
 254 CONFIG_I2C_MV64XXX=m
 255
 256 #
 257 # External I2C/SMBus adapter drivers
 258 #
 259 CONFIG_I2C_PARPORT=m
 260
 261 #
 262 # PPS clients support
 263 #
 264 # CONFIG_PPS_CLIENT_PARPORT is not set
 265
 266 #
 267 # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
 268 #
 269 CONFIG_PINCTRL=y
 270
 271 #
 272 # Pin controllers
 273 #
 274 CONFIG_PINMUX=y
 275 CONFIG_PINCONF=y
 276 CONFIG_GENERIC_PINCONF=y
 277 # CONFIG_DEBUG_PINCTRL is not set
 278 CONFIG_PINCTRL_SINGLE=m
 279 CONFIG_PINCTRL_MVEBU=y
 280 CONFIG_PINCTRL_KIRKWOOD=y
 281 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 282 CONFIG_GPIO_GENERIC=y
 283
 284 #
 285 # Memory mapped GPIO drivers:
 286 #
 287 CONFIG_GPIO_GENERIC_PLATFORM=y
 288 CONFIG_GPIO_MVEBU=y
 289
 290 #
 291 # SPI GPIO expanders:
 292 #
 293 CONFIG_GPIO_MCP23S08=m
 294
 295 #
 296 # 1-wire Slaves
 297 #
 298 # CONFIG_CHARGER_MANAGER is not set
 299 CONFIG_POWER_RESET_QNAP=y
 300
 301 #
 302 # Native drivers
 303 #
 304 CONFIG_CPU_THERMAL=y
 305 CONFIG_KIRKWOOD_THERMAL=m
 306
 307 #
 308 # Watchdog Device Drivers
 309 #
 310 CONFIG_ORION_WATCHDOG=m
 311
 312 #
 313 # Multifunction device drivers
 314 #
 315 CONFIG_MFD_CORE=m
 316 # CONFIG_ABX500_CORE is not set
 317 # CONFIG_MFD_SYSCON is not set
 318 # CONFIG_MFD_TPS65912 is not set
 319 CONFIG_REGULATOR=y
 320 # CONFIG_REGULATOR_DEBUG is not set
 321 CONFIG_REGULATOR_FIXED_VOLTAGE=y
 322 # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
 323 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 324 # CONFIG_REGULATOR_AD5398 is not set
 325 CONFIG_REGULATOR_DA9210=m
 326 # CONFIG_REGULATOR_FAN53555 is not set
 327 # CONFIG_REGULATOR_GPIO is not set
 328 # CONFIG_REGULATOR_ISL6271A is not set
 329 # CONFIG_REGULATOR_LP3971 is not set
 330 # CONFIG_REGULATOR_LP3972 is not set
 331 CONFIG_REGULATOR_LP872X=m
 332 CONFIG_REGULATOR_LP8755=m
 333 # CONFIG_REGULATOR_MAX1586 is not set
 334 # CONFIG_REGULATOR_MAX8649 is not set
 335 # CONFIG_REGULATOR_MAX8660 is not set
 336 # CONFIG_REGULATOR_MAX8952 is not set
 337 # CONFIG_REGULATOR_MAX8973 is not set
 338 CONFIG_REGULATOR_PFUZE100=m
 339 # CONFIG_REGULATOR_TPS51632 is not set
 340 # CONFIG_REGULATOR_TPS62360 is not set
 341 # CONFIG_REGULATOR_TPS65023 is not set
 342 # CONFIG_REGULATOR_TPS6507X is not set
 343 CONFIG_REGULATOR_VEXPRESS=m
 344
 345 #
 346 # Multimedia core support
 347 #
 348 CONFIG_VIDEO_V4L2=m
 349
 350 #
 351 # Supported MMC/SDIO adapters
 352 #
 353 # CONFIG_MEDIA_PARPORT_SUPPORT is not set
 354
 355 #
 356 # Media ancillary drivers (tuners, sensors, i2c, frontends)
 357 #
 358 CONFIG_VIDEO_IR_I2C=m
 359
 360 #
 361 # soc_camera sensor drivers
 362 #
 363 CONFIG_MEDIA_TUNER=m
 364 CONFIG_MEDIA_TUNER_SIMPLE=m
 365 CONFIG_MEDIA_TUNER_TDA8290=m
 366 CONFIG_MEDIA_TUNER_TDA827X=m
 367 CONFIG_MEDIA_TUNER_TDA18271=m
 368 CONFIG_MEDIA_TUNER_TDA9887=m
 369 CONFIG_MEDIA_TUNER_MT20XX=m
 370 CONFIG_MEDIA_TUNER_XC2028=m
 371 CONFIG_MEDIA_TUNER_XC5000=m
 372 CONFIG_MEDIA_TUNER_XC4000=m
 373 CONFIG_MEDIA_TUNER_MC44S803=m
 374
 375 #
 376 # Graphics support
 377 #
 378 CONFIG_DRM=m
 379 CONFIG_DRM_USB=m
 380 CONFIG_DRM_KMS_HELPER=m
 381
 382 #
 383 # I2C encoder or helper chips
 384 #
 385 CONFIG_DRM_UDL=m
 386 CONFIG_VIDEO_OUTPUT_CONTROL=m
 387 # CONFIG_FB_MODE_HELPERS is not set
 388
 389 #
 390 # Frame buffer hardware drivers
 391 #
 392 CONFIG_LCD_PLATFORM=m
 393 # CONFIG_BACKLIGHT_PWM is not set
 394
 395 #
 396 # Console display driver support
 397 #
 398 CONFIG_SND_MTS64=m
 399 CONFIG_SND_PORTMAN2X4=m
 400 CONFIG_SND_LX6464ES=m
 401 CONFIG_SND_KIRKWOOD_SOC=m
 402 CONFIG_SND_KIRKWOOD_SOC_OPENRD=m
 403 CONFIG_SND_KIRKWOOD_SOC_T5325=m
 404 CONFIG_SND_SOC_ALC5623=m
 405 CONFIG_SND_SOC_CS42L51=m
 406
 407 #
 408 # USB Host Controller Drivers
 409 #
 410 CONFIG_USB_EHCI_HCD_ORION=y
 411
 412 #
 413 # USB port drivers
 414 #
 415 CONFIG_USB_USS720=m
 416 CONFIG_USB_SERIAL_MOS7715_PARPORT=y
 417
 418 #
 419 # USB Physical Layer drivers
 420 #
 421 CONFIG_NOP_USB_XCEIV=m
 422 CONFIG_SAMSUNG_USBPHY=m
 423 CONFIG_SAMSUNG_USB2PHY=m
 424 CONFIG_SAMSUNG_USB3PHY=m
 425 CONFIG_MMC=m
 426
 427 #
 428 # MMC/SD/SDIO Card Drivers
 429 #
 430 CONFIG_MMC_BLOCK=m
 431
 432 #
 433 # MMC/SD/SDIO Host Controller Drivers
 434 #
 435 CONFIG_MMC_SDHCI=m
 436 CONFIG_MMC_MVSDIO=m
 437
 438 #
 439 # LED drivers
 440 #
 441 # CONFIG_LEDS_GPIO is not set
 442 CONFIG_LEDS_PWM=m
 443 CONFIG_LEDS_REGULATOR=m
 444 CONFIG_LEDS_NS2=m
 445 CONFIG_LEDS_NETXBIG=m
 446
 447 #
 448 # LED Triggers
 449 #
 450 CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 451
 452 #
 453 # on-CPU RTC drivers
 454 #
 455 CONFIG_RTC_DRV_MV=m
 456
 457 #
 458 # DMA Devices
 459 #
 460 CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
 461 CONFIG_MV_XOR=y
 462
 463 #
 464 # DMA Clients
 465 #
 466 CONFIG_DMA_ENGINE_RAID=y
 467
 468 #
 469 # Microsoft Hyper-V guest support
 470 #
 471 # CONFIG_PANEL is not set
 472
 473 #
 474 # Android
 475 #
 476 CONFIG_COMMON_CLK=y
 477
 478 #
 479 # Common Clock Framework
 480 #
 481 # CONFIG_COMMON_CLK_DEBUG is not set
 482 CONFIG_COMMON_CLK_SI5351=m
 483 CONFIG_MVEBU_CLK_COMMON=y
 484 CONFIG_KIRKWOOD_CLK=y
 485
 486 #
 487 # Hardware Spinlock drivers
 488 #
 489 CONFIG_ORION_TIMER=y
 490
 491 #
 492 # Rpmsg drivers
 493 #
 494 CONFIG_MVEBU_DEVBUS=y
 495
 496 #
 497 # Temperature sensors
 498 #
 499 CONFIG_PWM=y
 500 CONFIG_PWM_SYSFS=y
 501 CONFIG_PWM_PCA9685=m
 502 CONFIG_ORION_IRQCHIP=y
 503
 504 #
 505 # Lock Debugging (spinlocks, mutexes, etc...)
 506 #
 507 # CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
 508 # CONFIG_DEBUG_LOCK_ALLOC is not set
 509 # CONFIG_PROVE_LOCKING is not set
 510 # CONFIG_LOCK_STAT is not set
 511
 512 #
 513 # Runtime Testing
 514 #
 515 CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
 516 # CONFIG_DEBUG_UART_PL01X is not set
 517 CONFIG_DEBUG_UART_8250=y
 518 CONFIG_DEBUG_UART_PHYS=0xf1012000
 519 CONFIG_DEBUG_UART_VIRT=0xfed12000
 520 CONFIG_DEBUG_UART_8250_SHIFT=2
 521 # CONFIG_DEBUG_UART_8250_WORD is not set
 522 # CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
 523 CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
 524
 525 #
 526 # Random Number Generation
 527 #
 528 CONFIG_CRYPTO_DEV_MV_CESA=m
 529
 530 #
 531 # Library routines
 532 #
 533 CONFIG_RATIONAL=y
 534 CONFIG_HAS_IOPORT=y
 535 CONFIG_GENERIC_ATOMIC64=y
 536 # CONFIG_DDR is not set