kernel/config-armv7hl-exynos

   1 CONFIG_NEED_MACH_GPIO_H=y
   2 CONFIG_NEED_MACH_MEMORY_H=y
   3
   4 #
   5 # Kernel Performance Events And Counters
   6 #
   7 CONFIG_SLAB=y
   8 # CONFIG_SLUB is not set
   9
  10 #
  11 # System Type
  12 #
  13 # CONFIG_ARCH_MULTIPLATFORM is not set
  14 CONFIG_ARCH_EXYNOS=y
  15 CONFIG_PLAT_SAMSUNG=y
  16 CONFIG_PLAT_S5P=y
  17
  18 #
  19 # Boot options
  20 #
  21 # CONFIG_S3C_BOOT_ERROR_RESET is not set
  22 CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
  23 CONFIG_S3C_LOWLEVEL_UART_PORT=1
  24 # CONFIG_S5P_CLOCK is not set
  25 CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
  26 # CONFIG_S5P_IRQ is not set
  27 CONFIG_SAMSUNG_GPIOLIB_4BIT=y
  28 CONFIG_S5P_GPIO_DRVSTR=y
  29 CONFIG_SAMSUNG_GPIO_EXTRA=0
  30 CONFIG_S3C_GPIO_SPACE=0
  31 CONFIG_S3C_GPIO_TRACK=y
  32 # CONFIG_S3C_ADC is not set
  33 CONFIG_S3C_DEV_HSMMC2=y
  34 CONFIG_S3C_DEV_HSMMC3=y
  35 CONFIG_S3C_DEV_I2C1=y
  36 CONFIG_S3C_DEV_I2C3=y
  37 CONFIG_S3C_DEV_I2C7=y
  38 CONFIG_S3C_DEV_USB_HSOTG=y
  39 CONFIG_S3C_DEV_WDT=y
  40 CONFIG_S3C_DEV_RTC=y
  41 CONFIG_SAMSUNG_DEV_KEYPAD=y
  42 CONFIG_SAMSUNG_DEV_PWM=y
  43 CONFIG_SAMSUNG_DEV_BACKLIGHT=y
  44 CONFIG_S5P_DEV_FIMC0=y
  45 CONFIG_S5P_DEV_FIMC1=y
  46 CONFIG_S5P_DEV_FIMC2=y
  47 CONFIG_S5P_DEV_FIMC3=y
  48 CONFIG_S5P_DEV_FIMD0=y
  49 CONFIG_S5P_DEV_MFC=y
  50 CONFIG_S3C24XX_PWM=y
  51 CONFIG_SAMSUNG_DMADEV=y
  52
  53 #
  54 # Power management
  55 #
  56 # CONFIG_SAMSUNG_PM_DEBUG is not set
  57 # CONFIG_SAMSUNG_PM_CHECK is not set
  58 CONFIG_S5P_PM=y
  59 CONFIG_S5P_SLEEP=y
  60 CONFIG_DEBUG_S3C_UART=0
  61
  62 #
  63 # SAMSUNG EXYNOS SoCs Support
  64 #
  65 CONFIG_ARCH_EXYNOS4=y
  66 # CONFIG_ARCH_EXYNOS5 is not set
  67
  68 #
  69 # EXYNOS SoCs
  70 #
  71 CONFIG_CPU_EXYNOS4210=y
  72 CONFIG_SOC_EXYNOS4212=y
  73 CONFIG_SOC_EXYNOS4412=y
  74 CONFIG_EXYNOS_ATAGS=y
  75 CONFIG_EXYNOS_DEV_DMA=y
  76 CONFIG_EXYNOS4_SETUP_FIMD0=y
  77 CONFIG_EXYNOS4_SETUP_I2C1=y
  78 CONFIG_EXYNOS4_SETUP_I2C3=y
  79 CONFIG_EXYNOS4_SETUP_I2C7=y
  80 CONFIG_EXYNOS4_SETUP_KEYPAD=y
  81 CONFIG_EXYNOS4_SETUP_SDHCI=y
  82 CONFIG_EXYNOS4_SETUP_SDHCI_GPIO=y
  83 CONFIG_EXYNOS4_SETUP_USB_PHY=y
  84
  85 #
  86 # EXYNOS4210 Boards
  87 #
  88 # CONFIG_MACH_SMDKC210 is not set
  89 # CONFIG_MACH_SMDKV310 is not set
  90 # CONFIG_MACH_ARMLEX4210 is not set
  91 # CONFIG_MACH_UNIVERSAL_C210 is not set
  92 # CONFIG_MACH_NURI is not set
  93 # CONFIG_MACH_ORIGEN is not set
  94
  95 #
  96 # EXYNOS4212 Boards
  97 #
  98 CONFIG_MACH_SMDK4212=y
  99
 100 #
 101 # EXYNOS4412 Boards
 102 #
 103 CONFIG_MACH_SMDK4412=y
 104
 105 #
 106 # Flattened Device Tree based board for EXYNOS SoCs
 107 #
 108 CONFIG_MACH_EXYNOS4_DT=y
 109
 110 #
 111 # Configuration for HSMMC 8-bit bus width
 112 #
 113 # CONFIG_EXYNOS4_SDHCI_CH0_8BIT is not set
 114 # CONFIG_EXYNOS4_SDHCI_CH2_8BIT is not set
 115
 116 #
 117 # Processor Features
 118 #
 119 # CONFIG_ARM_LPAE is not set
 120 CONFIG_CACHE_PL310=y
 121 # CONFIG_ARM_ERRATA_458693 is not set
 122 # CONFIG_ARM_ERRATA_460075 is not set
 123 # CONFIG_ARM_ERRATA_742230 is not set
 124 # CONFIG_ARM_ERRATA_742231 is not set
 125 # CONFIG_PL310_ERRATA_588369 is not set
 126 # CONFIG_PL310_ERRATA_727915 is not set
 127 # CONFIG_ARM_ERRATA_743622 is not set
 128 # CONFIG_ARM_ERRATA_751472 is not set
 129 # CONFIG_PL310_ERRATA_753970 is not set
 130
 131 #
 132 # Bus support
 133 #
 134 # CONFIG_PCI_SYSCALL is not set
 135
 136 #
 137 # Kernel Features
 138 #
 139 # CONFIG_ARM_PSCI is not set
 140 CONFIG_ARCH_NR_GPIO=0
 141 CONFIG_HZ=200
 142 # CONFIG_THUMB2_KERNEL is not set
 143 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 144 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 145 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 146 CONFIG_SELECT_MEMORY_MODEL=y
 147 CONFIG_SPARSEMEM_MANUAL=y
 148 CONFIG_SPARSEMEM=y
 149 CONFIG_SPARSEMEM_EXTREME=y
 150 CONFIG_MEMORY_ISOLATION=y
 151 CONFIG_ZONE_DMA_FLAG=0
 152 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 153 CONFIG_FORCE_MAX_ZONEORDER=11
 154 # CONFIG_XEN is not set
 155
 156 #
 157 # Boot options
 158 #
 159 CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
 160 # CONFIG_XIP_KERNEL is not set
 161
 162 #
 163 # CPU Frequency scaling
 164 #
 165 CONFIG_CPU_FREQ=y
 166 CONFIG_CPU_FREQ_TABLE=y
 167 CONFIG_CPU_FREQ_GOV_COMMON=y
 168 CONFIG_CPU_FREQ_STAT=y
 169 CONFIG_CPU_FREQ_STAT_DETAILS=y
 170 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
 171 # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 172 # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
 173 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 174 # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 175 CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
 176 CONFIG_CPU_FREQ_GOV_POWERSAVE=m
 177 CONFIG_CPU_FREQ_GOV_USERSPACE=m
 178 CONFIG_CPU_FREQ_GOV_ONDEMAND=m
 179 CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
 180
 181 #
 182 # ARM CPU frequency scaling drivers
 183 #
 184 CONFIG_ARM_EXYNOS_CPUFREQ=y
 185 CONFIG_ARM_EXYNOS4210_CPUFREQ=y
 186 CONFIG_ARM_EXYNOS4X12_CPUFREQ=y
 187 # CONFIG_ARM_EXYNOS5250_CPUFREQ is not set
 188 # CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
 189 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 190
 191 #
 192 # Power management options
 193 #
 194 CONFIG_PM_GENERIC_DOMAINS=y
 195 CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
 196 CONFIG_PM_GENERIC_DOMAINS_RUNTIME=y
 197
 198 #
 199 # Generic Driver Options
 200 #
 201 CONFIG_FIRMWARE_IN_KERNEL=y
 202 CONFIG_CMA=y
 203 # CONFIG_CMA_DEBUG is not set
 204
 205 #
 206 # Default contiguous memory area size:
 207 #
 208 CONFIG_CMA_SIZE_MBYTES=16
 209 CONFIG_CMA_SIZE_SEL_MBYTES=y
 210 # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
 211 # CONFIG_CMA_SIZE_SEL_MIN is not set
 212 # CONFIG_CMA_SIZE_SEL_MAX is not set
 213 CONFIG_CMA_ALIGNMENT=8
 214 CONFIG_CMA_AREAS=7
 215
 216 #
 217 # Disk-On-Chip Device Drivers
 218 #
 219 # CONFIG_MTD_ONENAND_SAMSUNG is not set
 220
 221 #
 222 # Input device support
 223 #
 224 CONFIG_INPUT_MATRIXKMAP=y
 225
 226 #
 227 # Input Device Drivers
 228 #
 229 CONFIG_KEYBOARD_SAMSUNG=y
 230 CONFIG_INPUT_PWM_BEEPER=m
 231
 232 #
 233 # Serial drivers
 234 #
 235 # CONFIG_SERIAL_8250_CONSOLE is not set
 236 # CONFIG_SERIAL_8250_EXTENDED is not set
 237
 238 #
 239 # Non-8250 serial port support
 240 #
 241 # CONFIG_SERIAL_AMBA_PL011 is not set
 242 CONFIG_SERIAL_SAMSUNG=y
 243 CONFIG_SERIAL_SAMSUNG_UARTS_4=y
 244 CONFIG_SERIAL_SAMSUNG_UARTS=4
 245 # CONFIG_SERIAL_SAMSUNG_DEBUG is not set
 246 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 247 # CONFIG_SERIAL_OF_PLATFORM is not set
 248 # CONFIG_SERIAL_SCCNXP is not set
 249 # CONFIG_SERIAL_ARC is not set
 250 CONFIG_I2C_ALGOBIT=y
 251
 252 #
 253 # I2C system bus drivers (mostly embedded / system-on-chip)
 254 #
 255 CONFIG_I2C_S3C2410=y
 256
 257 #
 258 # Pin controllers
 259 #
 260 # CONFIG_PINCTRL_EXYNOS5440 is not set
 261
 262 #
 263 # Native drivers
 264 #
 265 # CONFIG_CPU_THERMAL is not set
 266
 267 #
 268 # Watchdog Device Drivers
 269 #
 270 CONFIG_S3C2410_WATCHDOG=y
 271
 272 #
 273 # Multimedia core support
 274 #
 275 # CONFIG_TTPCI_EEPROM is not set
 276
 277 #
 278 # Webcam, TV (analog/digital) USB devices
 279 #
 280 # CONFIG_VIDEO_SAMSUNG_EXYNOS4_IS is not set
 281 # CONFIG_VIDEO_SAMSUNG_S5P_TV is not set
 282 # CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
 283 # CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
 284 # CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
 285
 286 #
 287 # Graphics support
 288 #
 289 CONFIG_DRM=y
 290 # CONFIG_DRM_EXYNOS is not set
 291 # CONFIG_DRM_UDL is not set
 292 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
 293 # CONFIG_FB_CFB_FILLRECT is not set
 294 # CONFIG_FB_CFB_COPYAREA is not set
 295 # CONFIG_FB_CFB_IMAGEBLIT is not set
 296 CONFIG_FB_MODE_HELPERS=y
 297
 298 #
 299 # Frame buffer hardware drivers
 300 #
 301 # CONFIG_FB_S3C is not set
 302 CONFIG_BACKLIGHT_PWM=m
 303
 304 #
 305 # Console display driver support
 306 #
 307 # CONFIG_SND_OPL3_LIB_SEQ is not set
 308 # CONFIG_SND_EMU10K1_SEQ is not set
 309 CONFIG_SND_SOC_SAMSUNG=m
 310 # CONFIG_SND_SOC_SAMSUNG_SMDK_WM8994 is not set
 311 # CONFIG_SND_SOC_SAMSUNG_SMDK_SPDIF is not set
 312 # CONFIG_SND_SOC_SMDK_WM8994_PCM is not set
 313
 314 #
 315 # I2C HID support
 316 #
 317 # CONFIG_USB_ARCH_HAS_XHCI is not set
 318
 319 #
 320 # USB Host Controller Drivers
 321 #
 322 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 323 CONFIG_USB_EHCI_S5P=y
 324 CONFIG_USB_OHCI_EXYNOS=y
 325
 326 #
 327 # MMC/SD/SDIO Host Controller Drivers
 328 #
 329 CONFIG_MMC_SDHCI_S3C=y
 330 CONFIG_MMC_SDHCI_S3C_DMA=y
 331
 332 #
 333 # LED drivers
 334 #
 335 CONFIG_LEDS_PWM=m
 336
 337 #
 338 # on-CPU RTC drivers
 339 #
 340 CONFIG_RTC_DRV_S3C=y
 341
 342 #
 343 # Common Clock Framework
 344 #
 345 # CONFIG_COMMON_CLK_SI5351 is not set
 346
 347 #
 348 # Hardware Spinlock drivers
 349 #
 350 CONFIG_CLKSRC_EXYNOS_MCT=y
 351 CONFIG_CLKSRC_SAMSUNG_PWM=y
 352
 353 #
 354 # Magnetometer sensors
 355 #
 356 CONFIG_PWM=y
 357 CONFIG_PWM_SAMSUNG=y
 358 # CONFIG_PWM_TWL is not set
 359 # CONFIG_PWM_TWL_LED is not set
 360 CONFIG_GIC_NON_BANKED=y
 361
 362 #
 363 # Kernel hacking
 364 #
 365 # CONFIG_DEBUG_SLAB is not set
 366
 367 #
 368 # RCU Debugging
 369 #
 370 CONFIG_DEBUG_USER=y
 371 CONFIG_DEBUG_S3C_UART0=y
 372 # CONFIG_DEBUG_S3C_UART1 is not set
 373 # CONFIG_DEBUG_S3C_UART2 is not set
 374 # CONFIG_DEBUG_S3C_UART3 is not set
 375 # CONFIG_DEBUG_LL_UART_NONE is not set
 376 CONFIG_DEBUG_EXYNOS_UART=y
 377 CONFIG_DEBUG_LL_INCLUDE="debug/exynos.S"
 378 CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"