]> git.ipfire.org Git - people/arne_f/kernel.git/blob - drivers/edac/i82443bxgx_edac.c
cb61a5b7d0807e6af46f3461dbbe80bcb1a86ee6
[people/arne_f/kernel.git] / drivers / edac / i82443bxgx_edac.c
1 /*
2 * Intel 82443BX/GX (440BX/GX chipset) Memory Controller EDAC kernel
3 * module (C) 2006 Tim Small
4 *
5 * This file may be distributed under the terms of the GNU General
6 * Public License.
7 *
8 * Written by Tim Small <tim@buttersideup.com>, based on work by Linux
9 * Networx, Thayne Harbaugh, Dan Hollis <goemon at anime dot net> and
10 * others.
11 *
12 * 440GX fix by Jason Uhlenkott <juhlenko@akamai.com>.
13 *
14 * Written with reference to 82443BX Host Bridge Datasheet:
15 * http://download.intel.com/design/chipsets/datashts/29063301.pdf
16 * references to this document given in [].
17 *
18 * This module doesn't support the 440LX, but it may be possible to
19 * make it do so (the 440LX's register definitions are different, but
20 * not completely so - I haven't studied them in enough detail to know
21 * how easy this would be).
22 */
23
24 #include <linux/module.h>
25 #include <linux/init.h>
26
27 #include <linux/pci.h>
28 #include <linux/pci_ids.h>
29
30
31 #include <linux/edac.h>
32 #include "edac_module.h"
33
34 #define I82443_REVISION "0.1"
35
36 #define EDAC_MOD_STR "i82443bxgx_edac"
37
38 /* The 82443BX supports SDRAM, or EDO (EDO for mobile only), "Memory
39 * Size: 8 MB to 512 MB (1GB with Registered DIMMs) with eight memory
40 * rows" "The 82443BX supports multiple-bit error detection and
41 * single-bit error correction when ECC mode is enabled and
42 * single/multi-bit error detection when correction is disabled.
43 * During writes to the DRAM, the 82443BX generates ECC for the data
44 * on a QWord basis. Partial QWord writes require a read-modify-write
45 * cycle when ECC is enabled."
46 */
47
48 /* "Additionally, the 82443BX ensures that the data is corrected in
49 * main memory so that accumulation of errors is prevented. Another
50 * error within the same QWord would result in a double-bit error
51 * which is unrecoverable. This is known as hardware scrubbing since
52 * it requires no software intervention to correct the data in memory."
53 */
54
55 /* [Also see page 100 (section 4.3), "DRAM Interface"]
56 * [Also see page 112 (section 4.6.1.4), ECC]
57 */
58
59 #define I82443BXGX_NR_CSROWS 8
60 #define I82443BXGX_NR_CHANS 1
61 #define I82443BXGX_NR_DIMMS 4
62
63 /* 82443 PCI Device 0 */
64 #define I82443BXGX_NBXCFG 0x50 /* 32bit register starting at this PCI
65 * config space offset */
66 #define I82443BXGX_NBXCFG_OFFSET_NON_ECCROW 24 /* Array of bits, zero if
67 * row is non-ECC */
68 #define I82443BXGX_NBXCFG_OFFSET_DRAM_FREQ 12 /* 2 bits,00=100MHz,10=66 MHz */
69
70 #define I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY 7 /* 2 bits: */
71 #define I82443BXGX_NBXCFG_INTEGRITY_NONE 0x0 /* 00 = Non-ECC */
72 #define I82443BXGX_NBXCFG_INTEGRITY_EC 0x1 /* 01 = EC (only) */
73 #define I82443BXGX_NBXCFG_INTEGRITY_ECC 0x2 /* 10 = ECC */
74 #define I82443BXGX_NBXCFG_INTEGRITY_SCRUB 0x3 /* 11 = ECC + HW Scrub */
75
76 #define I82443BXGX_NBXCFG_OFFSET_ECC_DIAG_ENABLE 6
77
78 /* 82443 PCI Device 0 */
79 #define I82443BXGX_EAP 0x80 /* 32bit register starting at this PCI
80 * config space offset, Error Address
81 * Pointer Register */
82 #define I82443BXGX_EAP_OFFSET_EAP 12 /* High 20 bits of error address */
83 #define I82443BXGX_EAP_OFFSET_MBE BIT(1) /* Err at EAP was multi-bit (W1TC) */
84 #define I82443BXGX_EAP_OFFSET_SBE BIT(0) /* Err at EAP was single-bit (W1TC) */
85
86 #define I82443BXGX_ERRCMD 0x90 /* 8bit register starting at this PCI
87 * config space offset. */
88 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_MBE BIT(1) /* 1 = enable */
89 #define I82443BXGX_ERRCMD_OFFSET_SERR_ON_SBE BIT(0) /* 1 = enable */
90
91 #define I82443BXGX_ERRSTS 0x91 /* 16bit register starting at this PCI
92 * config space offset. */
93 #define I82443BXGX_ERRSTS_OFFSET_MBFRE 5 /* 3 bits - first err row multibit */
94 #define I82443BXGX_ERRSTS_OFFSET_MEF BIT(4) /* 1 = MBE occurred */
95 #define I82443BXGX_ERRSTS_OFFSET_SBFRE 1 /* 3 bits - first err row singlebit */
96 #define I82443BXGX_ERRSTS_OFFSET_SEF BIT(0) /* 1 = SBE occurred */
97
98 #define I82443BXGX_DRAMC 0x57 /* 8bit register starting at this PCI
99 * config space offset. */
100 #define I82443BXGX_DRAMC_OFFSET_DT 3 /* 2 bits, DRAM Type */
101 #define I82443BXGX_DRAMC_DRAM_IS_EDO 0 /* 00 = EDO */
102 #define I82443BXGX_DRAMC_DRAM_IS_SDRAM 1 /* 01 = SDRAM */
103 #define I82443BXGX_DRAMC_DRAM_IS_RSDRAM 2 /* 10 = Registered SDRAM */
104
105 #define I82443BXGX_DRB 0x60 /* 8x 8bit registers starting at this PCI
106 * config space offset. */
107
108 /* FIXME - don't poll when ECC disabled? */
109
110 struct i82443bxgx_edacmc_error_info {
111 u32 eap;
112 };
113
114 static struct edac_pci_ctl_info *i82443bxgx_pci;
115
116 static struct pci_dev *mci_pdev; /* init dev: in case that AGP code has
117 * already registered driver
118 */
119
120 static int i82443bxgx_registered = 1;
121
122 static void i82443bxgx_edacmc_get_error_info(struct mem_ctl_info *mci,
123 struct i82443bxgx_edacmc_error_info
124 *info)
125 {
126 struct pci_dev *pdev;
127 pdev = to_pci_dev(mci->pdev);
128 pci_read_config_dword(pdev, I82443BXGX_EAP, &info->eap);
129 if (info->eap & I82443BXGX_EAP_OFFSET_SBE)
130 /* Clear error to allow next error to be reported [p.61] */
131 pci_write_bits32(pdev, I82443BXGX_EAP,
132 I82443BXGX_EAP_OFFSET_SBE,
133 I82443BXGX_EAP_OFFSET_SBE);
134
135 if (info->eap & I82443BXGX_EAP_OFFSET_MBE)
136 /* Clear error to allow next error to be reported [p.61] */
137 pci_write_bits32(pdev, I82443BXGX_EAP,
138 I82443BXGX_EAP_OFFSET_MBE,
139 I82443BXGX_EAP_OFFSET_MBE);
140 }
141
142 static int i82443bxgx_edacmc_process_error_info(struct mem_ctl_info *mci,
143 struct
144 i82443bxgx_edacmc_error_info
145 *info, int handle_errors)
146 {
147 int error_found = 0;
148 u32 eapaddr, page, pageoffset;
149
150 /* bits 30:12 hold the 4kb block in which the error occurred
151 * [p.61] */
152 eapaddr = (info->eap & 0xfffff000);
153 page = eapaddr >> PAGE_SHIFT;
154 pageoffset = eapaddr - (page << PAGE_SHIFT);
155
156 if (info->eap & I82443BXGX_EAP_OFFSET_SBE) {
157 error_found = 1;
158 if (handle_errors)
159 edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
160 page, pageoffset, 0,
161 edac_mc_find_csrow_by_page(mci, page),
162 0, -1, mci->ctl_name, "");
163 }
164
165 if (info->eap & I82443BXGX_EAP_OFFSET_MBE) {
166 error_found = 1;
167 if (handle_errors)
168 edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
169 page, pageoffset, 0,
170 edac_mc_find_csrow_by_page(mci, page),
171 0, -1, mci->ctl_name, "");
172 }
173
174 return error_found;
175 }
176
177 static void i82443bxgx_edacmc_check(struct mem_ctl_info *mci)
178 {
179 struct i82443bxgx_edacmc_error_info info;
180
181 edac_dbg(1, "MC%d\n", mci->mc_idx);
182 i82443bxgx_edacmc_get_error_info(mci, &info);
183 i82443bxgx_edacmc_process_error_info(mci, &info, 1);
184 }
185
186 static void i82443bxgx_init_csrows(struct mem_ctl_info *mci,
187 struct pci_dev *pdev,
188 enum edac_type edac_mode,
189 enum mem_type mtype)
190 {
191 struct csrow_info *csrow;
192 struct dimm_info *dimm;
193 int index;
194 u8 drbar, dramc;
195 u32 row_base, row_high_limit, row_high_limit_last;
196
197 pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
198 row_high_limit_last = 0;
199 for (index = 0; index < mci->nr_csrows; index++) {
200 csrow = mci->csrows[index];
201 dimm = csrow->channels[0]->dimm;
202
203 pci_read_config_byte(pdev, I82443BXGX_DRB + index, &drbar);
204 edac_dbg(1, "MC%d: Row=%d DRB = %#0x\n",
205 mci->mc_idx, index, drbar);
206 row_high_limit = ((u32) drbar << 23);
207 /* find the DRAM Chip Select Base address and mask */
208 edac_dbg(1, "MC%d: Row=%d, Boundary Address=%#0x, Last = %#0x\n",
209 mci->mc_idx, index, row_high_limit,
210 row_high_limit_last);
211
212 /* 440GX goes to 2GB, represented with a DRB of 0. */
213 if (row_high_limit_last && !row_high_limit)
214 row_high_limit = 1UL << 31;
215
216 /* This row is empty [p.49] */
217 if (row_high_limit == row_high_limit_last)
218 continue;
219 row_base = row_high_limit_last;
220 csrow->first_page = row_base >> PAGE_SHIFT;
221 csrow->last_page = (row_high_limit >> PAGE_SHIFT) - 1;
222 dimm->nr_pages = csrow->last_page - csrow->first_page + 1;
223 /* EAP reports in 4kilobyte granularity [61] */
224 dimm->grain = 1 << 12;
225 dimm->mtype = mtype;
226 /* I don't think 440BX can tell you device type? FIXME? */
227 dimm->dtype = DEV_UNKNOWN;
228 /* Mode is global to all rows on 440BX */
229 dimm->edac_mode = edac_mode;
230 row_high_limit_last = row_high_limit;
231 }
232 }
233
234 static int i82443bxgx_edacmc_probe1(struct pci_dev *pdev, int dev_idx)
235 {
236 struct mem_ctl_info *mci;
237 struct edac_mc_layer layers[2];
238 u8 dramc;
239 u32 nbxcfg, ecc_mode;
240 enum mem_type mtype;
241 enum edac_type edac_mode;
242
243 edac_dbg(0, "MC:\n");
244
245 /* Something is really hosed if PCI config space reads from
246 * the MC aren't working.
247 */
248 if (pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg))
249 return -EIO;
250
251 layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
252 layers[0].size = I82443BXGX_NR_CSROWS;
253 layers[0].is_virt_csrow = true;
254 layers[1].type = EDAC_MC_LAYER_CHANNEL;
255 layers[1].size = I82443BXGX_NR_CHANS;
256 layers[1].is_virt_csrow = false;
257 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, 0);
258 if (mci == NULL)
259 return -ENOMEM;
260
261 edac_dbg(0, "MC: mci = %p\n", mci);
262 mci->pdev = &pdev->dev;
263 mci->mtype_cap = MEM_FLAG_EDO | MEM_FLAG_SDR | MEM_FLAG_RDR;
264 mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
265 pci_read_config_byte(pdev, I82443BXGX_DRAMC, &dramc);
266 switch ((dramc >> I82443BXGX_DRAMC_OFFSET_DT) & (BIT(0) | BIT(1))) {
267 case I82443BXGX_DRAMC_DRAM_IS_EDO:
268 mtype = MEM_EDO;
269 break;
270 case I82443BXGX_DRAMC_DRAM_IS_SDRAM:
271 mtype = MEM_SDR;
272 break;
273 case I82443BXGX_DRAMC_DRAM_IS_RSDRAM:
274 mtype = MEM_RDR;
275 break;
276 default:
277 edac_dbg(0, "Unknown/reserved DRAM type value in DRAMC register!\n");
278 mtype = -MEM_UNKNOWN;
279 }
280
281 if ((mtype == MEM_SDR) || (mtype == MEM_RDR))
282 mci->edac_cap = mci->edac_ctl_cap;
283 else
284 mci->edac_cap = EDAC_FLAG_NONE;
285
286 mci->scrub_cap = SCRUB_FLAG_HW_SRC;
287 pci_read_config_dword(pdev, I82443BXGX_NBXCFG, &nbxcfg);
288 ecc_mode = ((nbxcfg >> I82443BXGX_NBXCFG_OFFSET_DRAM_INTEGRITY) &
289 (BIT(0) | BIT(1)));
290
291 mci->scrub_mode = (ecc_mode == I82443BXGX_NBXCFG_INTEGRITY_SCRUB)
292 ? SCRUB_HW_SRC : SCRUB_NONE;
293
294 switch (ecc_mode) {
295 case I82443BXGX_NBXCFG_INTEGRITY_NONE:
296 edac_mode = EDAC_NONE;
297 break;
298 case I82443BXGX_NBXCFG_INTEGRITY_EC:
299 edac_mode = EDAC_EC;
300 break;
301 case I82443BXGX_NBXCFG_INTEGRITY_ECC:
302 case I82443BXGX_NBXCFG_INTEGRITY_SCRUB:
303 edac_mode = EDAC_SECDED;
304 break;
305 default:
306 edac_dbg(0, "Unknown/reserved ECC state in NBXCFG register!\n");
307 edac_mode = EDAC_UNKNOWN;
308 break;
309 }
310
311 i82443bxgx_init_csrows(mci, pdev, edac_mode, mtype);
312
313 /* Many BIOSes don't clear error flags on boot, so do this
314 * here, or we get "phantom" errors occurring at module-load
315 * time. */
316 pci_write_bits32(pdev, I82443BXGX_EAP,
317 (I82443BXGX_EAP_OFFSET_SBE |
318 I82443BXGX_EAP_OFFSET_MBE),
319 (I82443BXGX_EAP_OFFSET_SBE |
320 I82443BXGX_EAP_OFFSET_MBE));
321
322 mci->mod_name = EDAC_MOD_STR;
323 mci->mod_ver = I82443_REVISION;
324 mci->ctl_name = "I82443BXGX";
325 mci->dev_name = pci_name(pdev);
326 mci->edac_check = i82443bxgx_edacmc_check;
327 mci->ctl_page_to_phys = NULL;
328
329 if (edac_mc_add_mc(mci)) {
330 edac_dbg(3, "failed edac_mc_add_mc()\n");
331 goto fail;
332 }
333
334 /* allocating generic PCI control info */
335 i82443bxgx_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
336 if (!i82443bxgx_pci) {
337 printk(KERN_WARNING
338 "%s(): Unable to create PCI control\n",
339 __func__);
340 printk(KERN_WARNING
341 "%s(): PCI error report via EDAC not setup\n",
342 __func__);
343 }
344
345 edac_dbg(3, "MC: success\n");
346 return 0;
347
348 fail:
349 edac_mc_free(mci);
350 return -ENODEV;
351 }
352
353 /* returns count (>= 0), or negative on error */
354 static int i82443bxgx_edacmc_init_one(struct pci_dev *pdev,
355 const struct pci_device_id *ent)
356 {
357 int rc;
358
359 edac_dbg(0, "MC:\n");
360
361 /* don't need to call pci_enable_device() */
362 rc = i82443bxgx_edacmc_probe1(pdev, ent->driver_data);
363
364 if (mci_pdev == NULL)
365 mci_pdev = pci_dev_get(pdev);
366
367 return rc;
368 }
369
370 static void i82443bxgx_edacmc_remove_one(struct pci_dev *pdev)
371 {
372 struct mem_ctl_info *mci;
373
374 edac_dbg(0, "\n");
375
376 if (i82443bxgx_pci)
377 edac_pci_release_generic_ctl(i82443bxgx_pci);
378
379 if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL)
380 return;
381
382 edac_mc_free(mci);
383 }
384
385 static const struct pci_device_id i82443bxgx_pci_tbl[] = {
386 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_0)},
387 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443BX_2)},
388 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_0)},
389 {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443GX_2)},
390 {0,} /* 0 terminated list. */
391 };
392
393 MODULE_DEVICE_TABLE(pci, i82443bxgx_pci_tbl);
394
395 static struct pci_driver i82443bxgx_edacmc_driver = {
396 .name = EDAC_MOD_STR,
397 .probe = i82443bxgx_edacmc_init_one,
398 .remove = i82443bxgx_edacmc_remove_one,
399 .id_table = i82443bxgx_pci_tbl,
400 };
401
402 static int __init i82443bxgx_edacmc_init(void)
403 {
404 int pci_rc;
405 /* Ensure that the OPSTATE is set correctly for POLL or NMI */
406 opstate_init();
407
408 pci_rc = pci_register_driver(&i82443bxgx_edacmc_driver);
409 if (pci_rc < 0)
410 goto fail0;
411
412 if (mci_pdev == NULL) {
413 const struct pci_device_id *id = &i82443bxgx_pci_tbl[0];
414 int i = 0;
415 i82443bxgx_registered = 0;
416
417 while (mci_pdev == NULL && id->vendor != 0) {
418 mci_pdev = pci_get_device(id->vendor,
419 id->device, NULL);
420 i++;
421 id = &i82443bxgx_pci_tbl[i];
422 }
423 if (!mci_pdev) {
424 edac_dbg(0, "i82443bxgx pci_get_device fail\n");
425 pci_rc = -ENODEV;
426 goto fail1;
427 }
428
429 pci_rc = i82443bxgx_edacmc_init_one(mci_pdev, i82443bxgx_pci_tbl);
430
431 if (pci_rc < 0) {
432 edac_dbg(0, "i82443bxgx init fail\n");
433 pci_rc = -ENODEV;
434 goto fail1;
435 }
436 }
437
438 return 0;
439
440 fail1:
441 pci_unregister_driver(&i82443bxgx_edacmc_driver);
442
443 fail0:
444 pci_dev_put(mci_pdev);
445 return pci_rc;
446 }
447
448 static void __exit i82443bxgx_edacmc_exit(void)
449 {
450 pci_unregister_driver(&i82443bxgx_edacmc_driver);
451
452 if (!i82443bxgx_registered)
453 i82443bxgx_edacmc_remove_one(mci_pdev);
454
455 pci_dev_put(mci_pdev);
456 }
457
458 module_init(i82443bxgx_edacmc_init);
459 module_exit(i82443bxgx_edacmc_exit);
460
461 MODULE_LICENSE("GPL");
462 MODULE_AUTHOR("Tim Small <tim@buttersideup.com> - WPAD");
463 MODULE_DESCRIPTION("EDAC MC support for Intel 82443BX/GX memory controllers");
464
465 module_param(edac_op_state, int, 0444);
466 MODULE_PARM_DESC(edac_op_state, "EDAC Error Reporting state: 0=Poll,1=NMI");