xhci: Don't print a warning when setting link state for disabled ports

commit 1208d8a84fdcae6b395c57911cdf907450d30e70 upstream.

When disabling a USB3 port the hub driver will set the port link state to
U3 to prevent "ejected" or "safely removed" devices that are still
physically connected from immediately re-enumerating.

If the device was really unplugged, then error messages were printed
as the hub tries to set the U3 link state for a port that is no longer
enabled.

xhci-hcd ee000000.usb: Cannot set link state.
usb usb8-port1: cannot disable (err = -32)

Don't print error message in xhci-hub if hub tries to set port link state
for a disabled port. Return -ENODEV instead which also silences hub driver.

Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index c01d1f3a1c7d17c139bef06520b5d2f92dc435d9..d2a9767a8e9c5f4c8203edf47375d91dbc85365a 100644 (file)
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1236,17 +1236,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
                                temp = readl(port_array[wIndex]);
                                break;
                        }
-
-                       /* Software should not attempt to set
-                        * port link state above '3' (U3) and the port
-                        * must be enabled.
-                        */
-                       if ((temp & PORT_PE) == 0 ||
-                               (link_state > USB_SS_PORT_LS_U3)) {
-                               xhci_warn(xhci, "Cannot set link state.\n");
+                       /* Port must be enabled */
+                       if (!(temp & PORT_PE)) {
+                               retval = -ENODEV;
+                               break;
+                       }
+                       /* Can't set port link state above '3' (U3) */
+                       if (link_state > USB_SS_PORT_LS_U3) {
+                               xhci_warn(xhci, "Cannot set port %d link state %d\n",
+                                        wIndex, link_state);
                                goto error;
                        }
-
                        if (link_state == USB_SS_PORT_LS_U3) {
                                slot_id = xhci_find_slot_id_by_port(hcd, xhci,
                                                wIndex + 1);