. /opt/pakfire/lib/functions.sh
/usr/local/bin/backupctrl exclude >/dev/null 2>&1
+
+function find_device() {
+ local mountpoint="${1}"
+
+ local root
+ local dev mp fs flags rest
+ while read -r dev mp fs flags rest; do
+ # Skip unwanted entries
+ [ "${dev}" = "rootfs" ] && continue
+
+ if [ "${mp}" = "${mountpoint}" ] && [ -b "${dev}" ]; then
+ root="$(basename "${dev}")"
+ break
+ fi
+ done < /proc/mounts
+
+ # Get the actual device from the partition that holds /
+ while [ -n "${root}" ]; do
+ if [ -e "/sys/block/${root}" ]; then
+ echo "${root}"
+ return 0
+ fi
+
+ # Remove last character
+ root="${root::-1}"
+ done
+
+ return 1
+}
+
+
+#
# Remove old core updates from pakfire cache to save space...
core=95
for (( i=1; i<=$core; i++ ))
rm -f /var/cache/pakfire/core-upgrade-*-$i.ipfire
done
+#
+# Do some sanity checks.
+case $(uname -r) in
+ *-ipfire-versatile )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-${core}: ERROR cannot update. versatile support is dropped."
+ # Report no error to pakfire. So it does not try to install it again.
+ exit 0
+ ;;
+ *-ipfire* )
+ # Ok.
+ ;;
+ * )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-${core}: ERROR cannot update. No IPFire Kernel."
+ exit 1
+ ;;
+esac
+
+
+#
+#
+KVER="xxxKVERxxx"
+
+# Check diskspace on root
+ROOTSPACE=`df / -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+
+if [ $ROOTSPACE -lt 100000 ]; then
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-${core}: ERROR cannot update because not enough free space on root."
+ exit 2
+fi
+
+
+echo
+echo Update Kernel to $KVER ...
+#
+# Remove old kernel, configs, initrd, modules, dtb's ...
+#
+rm -rf /boot/System.map-*
+rm -rf /boot/config-*
+rm -rf /boot/ipfirerd-*
+rm -rf /boot/initramfs-*
+rm -rf /boot/vmlinuz-*
+rm -rf /boot/uImage-ipfire-*
+rm -rf /boot/uInit-ipfire-*
+rm -rf /boot/dtb-*-ipfire-*
+rm -rf /lib/modules
+
+case "$(uname -m)" in
+ armv*)
+ # Backup uEnv.txt if exist
+ if [ -e /boot/uEnv.txt ]; then
+ cp -vf /boot/uEnv.txt /boot/uEnv.txt.org
+ fi
+
+ # work around the u-boot folder detection bug
+ mkdir -pv /boot/dtb-$KVER-ipfire-kirkwood
+ mkdir -pv /boot/dtb-$KVER-ipfire-multi
+ ;;
+esac
+
# Remove files
rm -f /etc/rc.d/init.d/network-vlans
rm -f /etc/rc.d/rcsysinit.d/S91network-vlans
-# Stop services
+#
+#Stop services
+/etc/init.d/snort stop
+/etc/init.d/squid stop
/etc/init.d/ipsec stop
+/etc/init.d/ntp stop
+/etc/init.d/apache stop
+
+#
+#Extract files
+tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p --numeric-owner -C /
+
+# Check diskspace on boot
+BOOTSPACE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+
+if [ $BOOTSPACE -lt 1000 ]; then
+ case $(uname -r) in
+ *-ipfire-kirkwood )
+ # Special handling for old kirkwood images.
+ # (install only kirkwood kernel)
+ rm -rf /boot/*
+ # work around the u-boot folder detection bug
+ mkdir -pv /boot/dtb-$KVER-ipfire-kirkwood
+ tar xavf /opt/pakfire/tmp/files* --no-overwrite-dir -p \
+ --numeric-owner -C / --wildcards 'boot/*-kirkwood*'
+ ;;
+ * )
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-${core}: FATAL-ERROR space run out on boot. System is not bootable..."
+ /etc/init.d/apache start
+ exit 4
+ ;;
+ esac
+fi
-# Extract files
-extract_files
+# Regenerate IPsec configuration
+sudo -u nobody /srv/web/ipfire/cgi-bin/vpnmain.cgi
# Update Language cache
/usr/local/bin/update-lang-cache
+#
# Start services
+#
+/etc/init.d/apache start
+/etc/init.d/ntp start
+/etc/init.d/squid start
+/etc/init.d/snort start
if [ `grep "ENABLED=on" /var/ipfire/vpn/settings` ]; then
/etc/init.d/ipsec start
fi
-# This update need a reboot...
-#touch /var/run/need_reboot
+if [ -e /boot/grub/grub.cfg ]; then
+ grub-mkconfig > /boot/grub/grub.cfg
+fi
-# Finish
+# Upadate Kernel version uEnv.txt
+if [ -e /boot/uEnv.txt ]; then
+ sed -i -e "s/KVER=.*/KVER=${KVER}/g" /boot/uEnv.txt
+fi
+
+# call user update script (needed for some arm boards)
+if [ -e /boot/pakfire-kernel-update ]; then
+ /boot/pakfire-kernel-update ${KVER}
+fi
+
+case "$(uname -m)" in
+ i?86)
+ # Force (re)install pae kernel if pae is supported
+ rm -rf /opt/pakfire/db/installed/meta-linux-pae
+ if [ ! "$(grep "^flags.* pae " /proc/cpuinfo)" == "" ]; then
+ ROOTSPACE=`df / -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+ BOOTSPACE=`df /boot -Pk | sed "s| * | |g" | cut -d" " -f4 | tail -n 1`
+ if [ $BOOTSPACE -lt 12000 -o $ROOTSPACE -lt 90000 ]; then
+ /usr/bin/logger -p syslog.emerg -t ipfire \
+ "core-update-${core}: WARNING not enough space for pae kernel."
+ else
+ echo "Name: linux-pae" > /opt/pakfire/db/installed/meta-linux-pae
+ echo "ProgVersion: 0" >> /opt/pakfire/db/installed/meta-linux-pae
+ echo "Release: 0" >> /opt/pakfire/db/installed/meta-linux-pae
+ fi
+ fi
+ ;;
+esac
+#
+# After pakfire has ended run it again and update the lists and do upgrade
+#
+echo '#!/bin/bash' > /tmp/pak_update
+echo 'while [ "$(ps -A | grep " update.sh")" != "" ]; do' >> /tmp/pak_update
+echo ' sleep 1' >> /tmp/pak_update
+echo 'done' >> /tmp/pak_update
+echo 'while [ "$(ps -A | grep " pakfire")" != "" ]; do' >> /tmp/pak_update
+echo ' sleep 1' >> /tmp/pak_update
+echo 'done' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire update -y --force' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/opt/pakfire/pakfire upgrade -y' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire "Core-upgrade finished. If you use a customized grub/uboot config"' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire "Check it before reboot !!!"' >> /tmp/pak_update
+echo '/usr/bin/logger -p syslog.emerg -t ipfire " *** Please reboot... *** "' >> /tmp/pak_update
+echo 'touch /var/run/need_reboot ' >> /tmp/pak_update
+#
+killall -KILL pak_update
+chmod +x /tmp/pak_update
+/tmp/pak_update &
+
+sync
+
+#
+#Finish
/etc/init.d/fireinfo start
sendprofile
# Update grub config to display new core version
fi
sync
+echo
+echo Please wait until pakfire has ended...
+echo
+
# Don't report the exitcode last command
exit 0
projects / people / dweismueller / ipfire-2.x.git / commitdiff
