kernel/config-armv7hl-exynos

   1 CONFIG_NEED_MACH_GPIO_H=y
   2 CONFIG_NEED_MACH_MEMORY_H=y
   3
   4 #
   5 # System Type
   6 #
   7 # CONFIG_ARCH_MULTIPLATFORM is not set
   8 CONFIG_ARCH_EXYNOS=y
   9 CONFIG_PLAT_SAMSUNG=y
  10 CONFIG_PLAT_S5P=y
  11
  12 #
  13 # Boot options
  14 #
  15 # CONFIG_S3C_BOOT_ERROR_RESET is not set
  16 CONFIG_S3C_BOOT_UART_FORCE_FIFO=y
  17 CONFIG_S3C_LOWLEVEL_UART_PORT=1
  18 CONFIG_SAMSUNG_CLOCK=y
  19 CONFIG_SAMSUNG_CLKSRC=y
  20 CONFIG_S5P_CLOCK=y
  21 CONFIG_SAMSUNG_IRQ_VIC_TIMER=y
  22 CONFIG_S5P_IRQ=y
  23 CONFIG_SAMSUNG_GPIOLIB_4BIT=y
  24 CONFIG_S5P_GPIO_DRVSTR=y
  25 CONFIG_SAMSUNG_GPIO_EXTRA=0
  26 CONFIG_S3C_GPIO_SPACE=0
  27 CONFIG_S3C_GPIO_TRACK=y
  28 # CONFIG_S3C_ADC is not set
  29 CONFIG_S3C_DEV_HSMMC2=y
  30 CONFIG_S3C_DEV_HSMMC3=y
  31 CONFIG_S3C_DEV_I2C1=y
  32 CONFIG_S3C_DEV_I2C3=y
  33 CONFIG_S3C_DEV_I2C7=y
  34 CONFIG_S3C_DEV_USB_HSOTG=y
  35 CONFIG_S3C_DEV_WDT=y
  36 CONFIG_S3C_DEV_RTC=y
  37 CONFIG_SAMSUNG_DEV_KEYPAD=y
  38 CONFIG_SAMSUNG_DEV_PWM=y
  39 CONFIG_SAMSUNG_DEV_BACKLIGHT=y
  40 CONFIG_S5P_DEV_FIMC0=y
  41 CONFIG_S5P_DEV_FIMC1=y
  42 CONFIG_S5P_DEV_FIMC2=y
  43 CONFIG_S5P_DEV_FIMC3=y
  44 CONFIG_S5P_DEV_FIMD0=y
  45 CONFIG_S5P_DEV_MFC=y
  46 CONFIG_S3C24XX_PWM=y
  47 CONFIG_SAMSUNG_DMADEV=y
  48
  49 #
  50 # Power management
  51 #
  52 # CONFIG_SAMSUNG_PM_DEBUG is not set
  53 # CONFIG_SAMSUNG_PM_CHECK is not set
  54 CONFIG_S5P_PM=y
  55 CONFIG_S5P_SLEEP=y
  56 CONFIG_DEBUG_S3C_UART=0
  57
  58 #
  59 # SAMSUNG EXYNOS SoCs Support
  60 #
  61 CONFIG_ARCH_EXYNOS4=y
  62 # CONFIG_ARCH_EXYNOS5 is not set
  63
  64 #
  65 # EXYNOS SoCs
  66 #
  67 # CONFIG_CPU_EXYNOS4210 is not set
  68 CONFIG_SOC_EXYNOS4212=y
  69 CONFIG_SOC_EXYNOS4412=y
  70 CONFIG_EXYNOS4_MCT=y
  71 CONFIG_EXYNOS_DEV_DMA=y
  72 CONFIG_EXYNOS_DEV_DRM=y
  73 CONFIG_EXYNOS4_SETUP_FIMD0=y
  74 CONFIG_EXYNOS4_SETUP_I2C1=y
  75 CONFIG_EXYNOS4_SETUP_I2C3=y
  76 CONFIG_EXYNOS4_SETUP_I2C7=y
  77 CONFIG_EXYNOS4_SETUP_KEYPAD=y
  78 CONFIG_EXYNOS4_SETUP_SDHCI=y
  79 CONFIG_EXYNOS4_SETUP_SDHCI_GPIO=y
  80 CONFIG_EXYNOS4_SETUP_USB_PHY=y
  81
  82 #
  83 # EXYNOS4210 Boards
  84 #
  85 # CONFIG_MACH_SMDKC210 is not set
  86 # CONFIG_MACH_SMDKV310 is not set
  87 # CONFIG_MACH_ARMLEX4210 is not set
  88 # CONFIG_MACH_UNIVERSAL_C210 is not set
  89 # CONFIG_MACH_NURI is not set
  90 # CONFIG_MACH_ORIGEN is not set
  91
  92 #
  93 # EXYNOS4212 Boards
  94 #
  95 CONFIG_MACH_SMDK4212=y
  96
  97 #
  98 # EXYNOS4412 Boards
  99 #
 100 CONFIG_MACH_SMDK4412=y
 101
 102 #
 103 # Flattened Device Tree based board for EXYNOS SoCs
 104 #
 105 # CONFIG_MACH_EXYNOS4_DT is not set
 106
 107 #
 108 # Configuration for HSMMC 8-bit bus width
 109 #
 110 # CONFIG_EXYNOS4_SDHCI_CH0_8BIT is not set
 111 # CONFIG_EXYNOS4_SDHCI_CH2_8BIT is not set
 112
 113 #
 114 # Processor Features
 115 #
 116 # CONFIG_ARM_LPAE is not set
 117 CONFIG_CACHE_PL310=y
 118 CONFIG_ARM_ERRATA_458693=y
 119 CONFIG_ARM_ERRATA_460075=y
 120 CONFIG_ARM_ERRATA_742230=y
 121 CONFIG_ARM_ERRATA_742231=y
 122 CONFIG_ARM_ERRATA_743622=y
 123 CONFIG_ARM_ERRATA_751472=y
 124 CONFIG_PL310_ERRATA_753970=y
 125
 126 #
 127 # Kernel Features
 128 #
 129 # CONFIG_ARM_PSCI is not set
 130 CONFIG_ARCH_NR_GPIO=0
 131 CONFIG_HZ=200
 132 # CONFIG_THUMB2_KERNEL is not set
 133 CONFIG_ARCH_SPARSEMEM_ENABLE=y
 134 CONFIG_ARCH_SPARSEMEM_DEFAULT=y
 135 CONFIG_ARCH_SELECT_MEMORY_MODEL=y
 136 CONFIG_SELECT_MEMORY_MODEL=y
 137 CONFIG_SPARSEMEM_MANUAL=y
 138 CONFIG_SPARSEMEM=y
 139 CONFIG_SPARSEMEM_EXTREME=y
 140 CONFIG_FORCE_MAX_ZONEORDER=11
 141 # CONFIG_UACCESS_WITH_MEMCPY is not set
 142
 143 #
 144 # Boot options
 145 #
 146 # CONFIG_USE_OF is not set
 147 CONFIG_CMDLINE="console=ttySAC1,115200 root=/dev/mmcblk0p2 rootwait"
 148 # CONFIG_XIP_KERNEL is not set
 149
 150 #
 151 # CPU Frequency scaling
 152 #
 153 # CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 154
 155 #
 156 # Disk-On-Chip Device Drivers
 157 #
 158 # CONFIG_MTD_ONENAND_SAMSUNG is not set
 159
 160 #
 161 # Input Device Drivers
 162 #
 163 CONFIG_INPUT_PWM_BEEPER=m
 164 CONFIG_INPUT_DA9055_ONKEY=m
 165
 166 #
 167 # Non-8250 serial port support
 168 #
 169 CONFIG_SERIAL_SAMSUNG=y
 170 CONFIG_SERIAL_SAMSUNG_UARTS_4=y
 171 CONFIG_SERIAL_SAMSUNG_UARTS=4
 172 CONFIG_SERIAL_SAMSUNG_DEBUG=y
 173 CONFIG_SERIAL_SAMSUNG_CONSOLE=y
 174
 175 #
 176 # I2C system bus drivers (mostly embedded / system-on-chip)
 177 #
 178 # CONFIG_I2C_S3C2410 is not set
 179
 180 #
 181 # Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
 182 #
 183 CONFIG_GPIO_DA9055=m
 184
 185 #
 186 # 1-wire Slaves
 187 #
 188 # CONFIG_POWER_RESET_RESTART is not set
 189
 190 #
 191 # Native drivers
 192 #
 193 CONFIG_SENSORS_DA9055=m
 194
 195 #
 196 # Watchdog Device Drivers
 197 #
 198 CONFIG_DA9055_WATCHDOG=m
 199 # CONFIG_S3C2410_WATCHDOG is not set
 200
 201 #
 202 # Multifunction device drivers
 203 #
 204 CONFIG_MFD_DA9055=y
 205 CONFIG_MFD_LP8788=y
 206 CONFIG_MFD_MAX8907=m
 207 # CONFIG_REGULATOR_DA9055 is not set
 208 CONFIG_REGULATOR_FAN53555=m
 209 CONFIG_REGULATOR_MAX8907=m
 210 # CONFIG_REGULATOR_LP8755 is not set
 211 CONFIG_REGULATOR_LP8788=y
 212
 213 #
 214 # Webcam, TV (analog/digital) USB devices
 215 #
 216 # CONFIG_VIDEO_SAMSUNG_S5P_FIMC is not set
 217 CONFIG_VIDEO_SAMSUNG_S5P_TV=y
 218 CONFIG_VIDEO_SAMSUNG_S5P_HDMI=y
 219 # CONFIG_VIDEO_SAMSUNG_S5P_HDMI_DEBUG is not set
 220 CONFIG_VIDEO_SAMSUNG_S5P_HDMIPHY=y
 221 CONFIG_VIDEO_SAMSUNG_S5P_SII9234=m
 222 CONFIG_VIDEO_SAMSUNG_S5P_SDO=m
 223 CONFIG_VIDEO_SAMSUNG_S5P_MIXER=m
 224 # CONFIG_VIDEO_SAMSUNG_S5P_MIXER_DEBUG is not set
 225 # CONFIG_VIDEO_SAMSUNG_S5P_G2D is not set
 226 # CONFIG_VIDEO_SAMSUNG_S5P_JPEG is not set
 227 # CONFIG_VIDEO_SAMSUNG_S5P_MFC is not set
 228
 229 #
 230 # Frame buffer hardware drivers
 231 #
 232 CONFIG_FB_S3C=y
 233 # CONFIG_FB_S3C_DEBUG_REGWRITE is not set
 234 # CONFIG_BACKLIGHT_PWM is not set
 235 # CONFIG_BACKLIGHT_LP8788 is not set
 236
 237 #
 238 # Console display driver support
 239 #
 240 # CONFIG_SND_ATMEL_SOC is not set
 241 # CONFIG_SND_SOC_SAMSUNG is not set
 242
 243 #
 244 # USB Host Controller Drivers
 245 #
 246 CONFIG_USB_EHCI_S5P=y
 247 CONFIG_USB_OHCI_EXYNOS=y
 248
 249 #
 250 # USB Physical Layer drivers
 251 #
 252 # CONFIG_SAMSUNG_USBPHY is not set
 253
 254 #
 255 # MMC/SD/SDIO Host Controller Drivers
 256 #
 257 CONFIG_MMC_SDHCI_S3C=y
 258 CONFIG_MMC_SDHCI_S3C_DMA=y
 259
 260 #
 261 # LED drivers
 262 #
 263 CONFIG_LEDS_LP8788=m
 264 CONFIG_LEDS_PWM=m
 265
 266 #
 267 # I2C RTC drivers
 268 #
 269 CONFIG_RTC_DRV_LP8788=m
 270 CONFIG_RTC_DRV_MAX8907=m
 271
 272 #
 273 # Platform RTC drivers
 274 #
 275 CONFIG_RTC_DRV_DA9055=m
 276
 277 #
 278 # on-CPU RTC drivers
 279 #
 280 # CONFIG_RTC_DRV_S3C is not set
 281
 282 #
 283 # Analog to digital converters
 284 #
 285 # CONFIG_LP8788_ADC is not set
 286
 287 #
 288 # Magnetometer sensors
 289 #
 290 CONFIG_PWM=y
 291 CONFIG_PWM_SAMSUNG=y
 292 CONFIG_PWM_TWL=m
 293 CONFIG_PWM_TWL_LED=m
 294 CONFIG_GIC_NON_BANKED=y
 295
 296 #
 297 # Kernel hacking
 298 #
 299 # CONFIG_DEBUG_LOCK_ALLOC is not set
 300 # CONFIG_PROVE_LOCKING is not set
 301 # CONFIG_LOCK_STAT is not set
 302
 303 #
 304 # RCU Debugging
 305 #
 306 CONFIG_DEBUG_USER=y
 307 CONFIG_DEBUG_S3C_UART0=y
 308 # CONFIG_DEBUG_S3C_UART1 is not set
 309 # CONFIG_DEBUG_S3C_UART2 is not set
 310 # CONFIG_DEBUG_S3C_UART3 is not set
 311 # CONFIG_DEBUG_LL_UART_NONE is not set
 312 CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
 313
 314 #
 315 # Non-executable pages
 316 #
 317 # CONFIG_PAX_KERNEXEC is not set
 318
 319 #
 320 # Miscellaneous hardening features
 321 #
 322 # CONFIG_PAX_MEMORY_UDEREF is not set