[people/ms/linux.git] / drivers / gpu / drm / vmwgfx / vmwgfx_stdu.c

/******************************************************************************
 *
 * COPYRIGHT © 2014-2015 VMware, Inc., Palo Alto, CA., USA
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sub license, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial portions
 * of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
 * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
 * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
 * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
 * USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 ******************************************************************************/

#include "vmwgfx_kms.h"
#include "device_include/svga3d_surfacedefs.h"
#include <drm/drm_plane_helper.h>

#define vmw_crtc_to_stdu(x) \
        container_of(x, struct vmw_screen_target_display_unit, base.crtc)
#define vmw_encoder_to_stdu(x) \
        container_of(x, struct vmw_screen_target_display_unit, base.encoder)
#define vmw_connector_to_stdu(x) \
        container_of(x, struct vmw_screen_target_display_unit, base.connector)



enum stdu_content_type {
        SAME_AS_DISPLAY = 0,
        SEPARATE_SURFACE,
        SEPARATE_DMA
};

/**
 * struct vmw_stdu_dirty - closure structure for the update functions
 *
 * @base: The base type we derive from. Used by vmw_kms_helper_dirty().
 * @transfer: Transfer direction for DMA command.
 * @left: Left side of bounding box.
 * @right: Right side of bounding box.
 * @top: Top side of bounding box.
 * @bottom: Bottom side of bounding box.
 * @buf: DMA buffer when DMA-ing between buffer and screen targets.
 * @sid: Surface ID when copying between surface and screen targets.
 */
struct vmw_stdu_dirty {
        struct vmw_kms_dirty base;
        SVGA3dTransferType  transfer;
        s32 left, right, top, bottom;
        u32 pitch;
        union {
                struct vmw_dma_buffer *buf;
                u32 sid;
        };
};

/*
 * SVGA commands that are used by this code. Please see the device headers
 * for explanation.
 */
struct vmw_stdu_update {
        SVGA3dCmdHeader header;
        SVGA3dCmdUpdateGBScreenTarget body;
};

struct vmw_stdu_dma {
        SVGA3dCmdHeader     header;
        SVGA3dCmdSurfaceDMA body;
};

struct vmw_stdu_surface_copy {
        SVGA3dCmdHeader      header;
        SVGA3dCmdSurfaceCopy body;
};


/**
 * struct vmw_screen_target_display_unit
 *
 * @base: VMW specific DU structure
 * @display_srf: surface to be displayed.  The dimension of this will always
 *               match the display mode.  If the display mode matches
 *               content_vfbs dimensions, then this is a pointer into the
 *               corresponding field in content_vfbs.  If not, then this
 *               is a separate buffer to which content_vfbs will blit to.
 * @content_fb: holds the rendered content, can be a surface or DMA buffer
 * @content_type:  content_fb type
 * @defined:  true if the current display unit has been initialized
 */
struct vmw_screen_target_display_unit {
        struct vmw_display_unit base;

        struct vmw_surface     *display_srf;
        struct drm_framebuffer *content_fb;

        enum stdu_content_type content_fb_type;

        bool defined;
};



static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu);



/******************************************************************************
 * Screen Target Display Unit helper Functions
 *****************************************************************************/

/**
 * vmw_stdu_pin_display - pins the resource associated with the display surface
 *
 * @stdu: contains the display surface
 *
 * Since the display surface can either be a private surface allocated by us,
 * or it can point to the content surface, we use this function to not pin the
 * same resource twice.
 */
static int vmw_stdu_pin_display(struct vmw_screen_target_display_unit *stdu)
{
        return vmw_resource_pin(&stdu->display_srf->res, false);
}



/**
 * vmw_stdu_unpin_display - unpins the resource associated with display surface
 *
 * @stdu: contains the display surface
 *
 * If the display surface was privatedly allocated by
 * vmw_surface_gb_priv_define() and not registered as a framebuffer, then it
 * won't be automatically cleaned up when all the framebuffers are freed.  As
 * such, we have to explicitly call vmw_resource_unreference() to get it freed.
 */
static void vmw_stdu_unpin_display(struct vmw_screen_target_display_unit *stdu)
{
        if (stdu->display_srf) {
                struct vmw_resource *res = &stdu->display_srf->res;

                vmw_resource_unpin(res);

                if (stdu->content_fb_type != SAME_AS_DISPLAY) {
                        vmw_resource_unreference(&res);
                        stdu->content_fb_type = SAME_AS_DISPLAY;
                }

                stdu->display_srf = NULL;
        }
}



/******************************************************************************
 * Screen Target Display Unit CRTC Functions
 *****************************************************************************/


/**
 * vmw_stdu_crtc_destroy - cleans up the STDU
 *
 * @crtc: used to get a reference to the containing STDU
 */
static void vmw_stdu_crtc_destroy(struct drm_crtc *crtc)
{
        vmw_stdu_destroy(vmw_crtc_to_stdu(crtc));
}

/**
 * vmw_stdu_define_st - Defines a Screen Target
 *
 * @dev_priv:  VMW DRM device
 * @stdu: display unit to create a Screen Target for
 *
 * Creates a STDU that we can used later.  This function is called whenever the
 * framebuffer size changes.
 *
 * RETURNs:
 * 0 on success, error code on failure
 */
static int vmw_stdu_define_st(struct vmw_private *dev_priv,
                              struct vmw_screen_target_display_unit *stdu)
{
        struct {
                SVGA3dCmdHeader header;
                SVGA3dCmdDefineGBScreenTarget body;
        } *cmd;

        cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));

        if (unlikely(cmd == NULL)) {
                DRM_ERROR("Out of FIFO space defining Screen Target\n");
                return -ENOMEM;
        }

        cmd->header.id   = SVGA_3D_CMD_DEFINE_GB_SCREENTARGET;
        cmd->header.size = sizeof(cmd->body);

        cmd->body.stid   = stdu->base.unit;
        cmd->body.width  = stdu->display_srf->base_size.width;
        cmd->body.height = stdu->display_srf->base_size.height;
        cmd->body.flags  = (0 == cmd->body.stid) ? SVGA_STFLAG_PRIMARY : 0;
        cmd->body.dpi    = 0;
        cmd->body.xRoot  = stdu->base.crtc.x;
        cmd->body.yRoot  = stdu->base.crtc.y;

        if (!stdu->base.is_implicit) {
                cmd->body.xRoot  = stdu->base.gui_x;
                cmd->body.yRoot  = stdu->base.gui_y;
        }

        vmw_fifo_commit(dev_priv, sizeof(*cmd));

        stdu->defined = true;

        return 0;
}



/**
 * vmw_stdu_bind_st - Binds a surface to a Screen Target
 *
 * @dev_priv: VMW DRM device
 * @stdu: display unit affected
 * @res: Buffer to bind to the screen target.  Set to NULL to blank screen.
 *
 * Binding a surface to a Screen Target the same as flipping
 */
static int vmw_stdu_bind_st(struct vmw_private *dev_priv,
                            struct vmw_screen_target_display_unit *stdu,
                            struct vmw_resource *res)
{
        SVGA3dSurfaceImageId image;

        struct {
                SVGA3dCmdHeader header;
                SVGA3dCmdBindGBScreenTarget body;
        } *cmd;


        if (!stdu->defined) {
                DRM_ERROR("No screen target defined\n");
                return -EINVAL;
        }

        /* Set up image using information in vfb */
        memset(&image, 0, sizeof(image));
        image.sid = res ? res->id : SVGA3D_INVALID_ID;

        cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));

        if (unlikely(cmd == NULL)) {
                DRM_ERROR("Out of FIFO space binding a screen target\n");
                return -ENOMEM;
        }

        cmd->header.id   = SVGA_3D_CMD_BIND_GB_SCREENTARGET;
        cmd->header.size = sizeof(cmd->body);

        cmd->body.stid   = stdu->base.unit;
        cmd->body.image  = image;

        vmw_fifo_commit(dev_priv, sizeof(*cmd));

        return 0;
}

/**
 * vmw_stdu_populate_update - populate an UPDATE_GB_SCREENTARGET command with a
 * bounding box.
 *
 * @cmd: Pointer to command stream.
 * @unit: Screen target unit.
 * @left: Left side of bounding box.
 * @right: Right side of bounding box.
 * @top: Top side of bounding box.
 * @bottom: Bottom side of bounding box.
 */
static void vmw_stdu_populate_update(void *cmd, int unit,
                                     s32 left, s32 right, s32 top, s32 bottom)
{
        struct vmw_stdu_update *update = cmd;

        update->header.id   = SVGA_3D_CMD_UPDATE_GB_SCREENTARGET;
        update->header.size = sizeof(update->body);

        update->body.stid   = unit;
        update->body.rect.x = left;
        update->body.rect.y = top;
        update->body.rect.w = right - left;
        update->body.rect.h = bottom - top;
}

/**
 * vmw_stdu_update_st - Full update of a Screen Target
 *
 * @dev_priv: VMW DRM device
 * @stdu: display unit affected
 *
 * This function needs to be called whenever the content of a screen
 * target has changed completely. Typically as a result of a backing
 * surface change.
 *
 * RETURNS:
 * 0 on success, error code on failure
 */
static int vmw_stdu_update_st(struct vmw_private *dev_priv,
                              struct vmw_screen_target_display_unit *stdu)
{
        struct vmw_stdu_update *cmd;
        struct drm_crtc *crtc = &stdu->base.crtc;

        if (!stdu->defined) {
                DRM_ERROR("No screen target defined");
                return -EINVAL;
        }

        cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));

        if (unlikely(cmd == NULL)) {
                DRM_ERROR("Out of FIFO space updating a Screen Target\n");
                return -ENOMEM;
        }

        vmw_stdu_populate_update(cmd, stdu->base.unit, 0, crtc->mode.hdisplay,
                                 0, crtc->mode.vdisplay);

        vmw_fifo_commit(dev_priv, sizeof(*cmd));

        return 0;
}



/**
 * vmw_stdu_destroy_st - Destroy a Screen Target
 *
 * @dev_priv:  VMW DRM device
 * @stdu: display unit to destroy
 */
static int vmw_stdu_destroy_st(struct vmw_private *dev_priv,
                               struct vmw_screen_target_display_unit *stdu)
{
        int    ret;

        struct {
                SVGA3dCmdHeader header;
                SVGA3dCmdDestroyGBScreenTarget body;
        } *cmd;


        /* Nothing to do if not successfully defined */
        if (unlikely(!stdu->defined))
                return 0;

        cmd = vmw_fifo_reserve(dev_priv, sizeof(*cmd));

        if (unlikely(cmd == NULL)) {
                DRM_ERROR("Out of FIFO space, screen target not destroyed\n");
                return -ENOMEM;
        }

        cmd->header.id   = SVGA_3D_CMD_DESTROY_GB_SCREENTARGET;
        cmd->header.size = sizeof(cmd->body);

        cmd->body.stid   = stdu->base.unit;

        vmw_fifo_commit(dev_priv, sizeof(*cmd));

        /* Force sync */
        ret = vmw_fallback_wait(dev_priv, false, true, 0, false, 3*HZ);
        if (unlikely(ret != 0))
                DRM_ERROR("Failed to sync with HW");

        stdu->defined = false;

        return ret;
}



/**
 * vmw_stdu_crtc_set_config - Sets a mode
 *
 * @set:  mode parameters
 *
 * This function is the device-specific portion of the DRM CRTC mode set.
 * For the SVGA device, we do this by defining a Screen Target, binding a
 * GB Surface to that target, and finally update the screen target.
 *
 * RETURNS:
 * 0 on success, error code otherwise
 */
static int vmw_stdu_crtc_set_config(struct drm_mode_set *set)
{
        struct vmw_private *dev_priv;
        struct vmw_screen_target_display_unit *stdu;
        struct vmw_framebuffer *vfb;
        struct vmw_framebuffer_surface *new_vfbs;
        struct drm_display_mode *mode;
        struct drm_framebuffer  *new_fb;
        struct drm_crtc      *crtc;
        struct drm_encoder   *encoder;
        struct drm_connector *connector;
        int    ret;


        if (!set || !set->crtc)
                return -EINVAL;

        crtc     = set->crtc;
        crtc->x  = set->x;
        crtc->y  = set->y;
        stdu     = vmw_crtc_to_stdu(crtc);
        mode     = set->mode;
        new_fb   = set->fb;
        dev_priv = vmw_priv(crtc->dev);


        if (set->num_connectors > 1) {
                DRM_ERROR("Too many connectors\n");
                return -EINVAL;
        }

        if (set->num_connectors == 1 &&
            set->connectors[0] != &stdu->base.connector) {
                DRM_ERROR("Connectors don't match %p %p\n",
                        set->connectors[0], &stdu->base.connector);
                return -EINVAL;
        }


        /* Since they always map one to one these are safe */
        connector = &stdu->base.connector;
        encoder   = &stdu->base.encoder;


        /*
         * After this point the CRTC will be considered off unless a new fb
         * is bound
         */
        if (stdu->defined) {
                /* Unbind current surface by binding an invalid one */
                ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
                if (unlikely(ret != 0))
                        return ret;

                /* Update Screen Target, display will now be blank */
                if (crtc->primary->fb) {
                        vmw_stdu_update_st(dev_priv, stdu);
                        if (unlikely(ret != 0))
                                return ret;
                }

                crtc->primary->fb  = NULL;
                crtc->enabled      = false;
                encoder->crtc      = NULL;
                connector->encoder = NULL;

                vmw_stdu_unpin_display(stdu);
                stdu->content_fb      = NULL;
                stdu->content_fb_type = SAME_AS_DISPLAY;

                ret = vmw_stdu_destroy_st(dev_priv, stdu);
                /* The hardware is hung, give up */
                if (unlikely(ret != 0))
                        return ret;
        }


        /* Any of these conditions means the caller wants CRTC off */
        if (set->num_connectors == 0 || !mode || !new_fb)
                return 0;


        if (set->x + mode->hdisplay > new_fb->width ||
            set->y + mode->vdisplay > new_fb->height) {
                DRM_ERROR("Set outside of framebuffer\n");
                return -EINVAL;
        }

        stdu->content_fb = new_fb;
        vfb = vmw_framebuffer_to_vfb(stdu->content_fb);

        if (vfb->dmabuf)
                stdu->content_fb_type = SEPARATE_DMA;

        /*
         * If the requested mode is different than the width and height
         * of the FB or if the content buffer is a DMA buf, then allocate
         * a display FB that matches the dimension of the mode
         */
        if (mode->hdisplay != new_fb->width  ||
            mode->vdisplay != new_fb->height ||
            stdu->content_fb_type != SAME_AS_DISPLAY) {
                struct vmw_surface content_srf;
                struct drm_vmw_size display_base_size = {0};
                struct vmw_surface *display_srf;


                display_base_size.width  = mode->hdisplay;
                display_base_size.height = mode->vdisplay;
                display_base_size.depth  = 1;

                /*
                 * If content buffer is a DMA buf, then we have to construct
                 * surface info
                 */
                if (stdu->content_fb_type == SEPARATE_DMA) {

                        switch (new_fb->bits_per_pixel) {
                        case 32:
                                content_srf.format = SVGA3D_X8R8G8B8;
                                break;

                        case 16:
                                content_srf.format = SVGA3D_R5G6B5;
                                break;

                        case 8:
                                content_srf.format = SVGA3D_P8;
                                break;

                        default:
                                DRM_ERROR("Invalid format\n");
                                ret = -EINVAL;
                                goto err_unref_content;
                        }

                        content_srf.flags             = 0;
                        content_srf.mip_levels[0]     = 1;
                        content_srf.multisample_count = 0;
                } else {

                        stdu->content_fb_type = SEPARATE_SURFACE;

                        new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
                        content_srf = *new_vfbs->surface;
                }


                ret = vmw_surface_gb_priv_define(crtc->dev,
                                0, /* because kernel visible only */
                                content_srf.flags,
                                content_srf.format,
                                true, /* a scanout buffer */
                                content_srf.mip_levels[0],
                                content_srf.multisample_count,
                                0,
                                display_base_size,
                                &display_srf);
                if (unlikely(ret != 0)) {
                        DRM_ERROR("Cannot allocate a display FB.\n");
                        goto err_unref_content;
                }

                stdu->display_srf = display_srf;
        } else {
                new_vfbs = vmw_framebuffer_to_vfbs(new_fb);
                stdu->display_srf = new_vfbs->surface;
        }


        ret = vmw_stdu_pin_display(stdu);
        if (unlikely(ret != 0)) {
                stdu->display_srf = NULL;
                goto err_unref_content;
        }

        vmw_svga_enable(dev_priv);

        /*
         * Steps to displaying a surface, assume surface is already
         * bound:
         *   1.  define a screen target
         *   2.  bind a fb to the screen target
         *   3.  update that screen target (this is done later by
         *       vmw_kms_stdu_do_surface_dirty_or_present)
         */
        ret = vmw_stdu_define_st(dev_priv, stdu);
        if (unlikely(ret != 0))
                goto err_unpin_display_and_content;

        ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
        if (unlikely(ret != 0))
                goto err_unpin_destroy_st;


        connector->encoder = encoder;
        encoder->crtc      = crtc;

        crtc->mode    = *mode;
        crtc->primary->fb = new_fb;
        crtc->enabled = true;

        return ret;

err_unpin_destroy_st:
        vmw_stdu_destroy_st(dev_priv, stdu);
err_unpin_display_and_content:
        vmw_stdu_unpin_display(stdu);
err_unref_content:
        stdu->content_fb = NULL;
        return ret;
}



/**
 * vmw_stdu_crtc_page_flip - Binds a buffer to a screen target
 *
 * @crtc: CRTC to attach FB to
 * @fb: FB to attach
 * @event: Event to be posted. This event should've been alloced
 *         using k[mz]alloc, and should've been completely initialized.
 * @page_flip_flags: Input flags.
 *
 * If the STDU uses the same display and content buffers, i.e. a true flip,
 * this function will replace the existing display buffer with the new content
 * buffer.
 *
 * If the STDU uses different display and content buffers, i.e. a blit, then
 * only the content buffer will be updated.
 *
 * RETURNS:
 * 0 on success, error code on failure
 */
static int vmw_stdu_crtc_page_flip(struct drm_crtc *crtc,
                                   struct drm_framebuffer *new_fb,
                                   struct drm_pending_vblank_event *event,
                                   uint32_t flags)

{
        struct vmw_private *dev_priv = vmw_priv(crtc->dev);
        struct vmw_screen_target_display_unit *stdu;
        int ret;

        if (crtc == NULL)
                return -EINVAL;

        dev_priv          = vmw_priv(crtc->dev);
        stdu              = vmw_crtc_to_stdu(crtc);
        crtc->primary->fb = new_fb;
        stdu->content_fb  = new_fb;

        if (stdu->display_srf) {
                /*
                 * If the display surface is the same as the content surface
                 * then remove the reference
                 */
                if (stdu->content_fb_type == SAME_AS_DISPLAY) {
                        if (stdu->defined) {
                                /* Unbind the current surface */
                                ret = vmw_stdu_bind_st(dev_priv, stdu, NULL);
                                if (unlikely(ret != 0))
                                        goto err_out;
                        }
                        vmw_stdu_unpin_display(stdu);
                        stdu->display_srf = NULL;
                }
        }


        if (!new_fb) {
                /* Blanks the display */
                (void) vmw_stdu_update_st(dev_priv, stdu);

                return 0;
        }


        if (stdu->content_fb_type == SAME_AS_DISPLAY) {
                stdu->display_srf = vmw_framebuffer_to_vfbs(new_fb)->surface;
                ret = vmw_stdu_pin_display(stdu);
                if (ret) {
                        stdu->display_srf = NULL;
                        goto err_out;
                }

                /* Bind display surface */
                ret = vmw_stdu_bind_st(dev_priv, stdu, &stdu->display_srf->res);
                if (unlikely(ret != 0))
                        goto err_unpin_display_and_content;
        }

        /* Update display surface: after this point everything is bound */
        ret = vmw_stdu_update_st(dev_priv, stdu);
        if (unlikely(ret != 0))
                return ret;

        if (event) {
                struct vmw_fence_obj *fence = NULL;
                struct drm_file *file_priv = event->base.file_priv;

                vmw_execbuf_fence_commands(NULL, dev_priv, &fence, NULL);
                if (!fence)
                        return -ENOMEM;

                ret = vmw_event_fence_action_queue(file_priv, fence,
                                                   &event->base,
                                                   &event->event.tv_sec,
                                                   &event->event.tv_usec,
                                                   true);
                vmw_fence_obj_unreference(&fence);
        } else {
                vmw_fifo_flush(dev_priv, false);
        }

        return ret;

err_unpin_display_and_content:
        vmw_stdu_unpin_display(stdu);
err_out:
        crtc->primary->fb = NULL;
        stdu->content_fb = NULL;
        return ret;
}


/**
 * vmw_stdu_dmabuf_clip - Callback to encode a suface DMA command cliprect
 *
 * @dirty: The closure structure.
 *
 * Encodes a surface DMA command cliprect and updates the bounding box
 * for the DMA.
 */
static void vmw_stdu_dmabuf_clip(struct vmw_kms_dirty *dirty)
{
        struct vmw_stdu_dirty *ddirty =
                container_of(dirty, struct vmw_stdu_dirty, base);
        struct vmw_stdu_dma *cmd = dirty->cmd;
        struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];

        blit += dirty->num_hits;
        blit->srcx = dirty->fb_x;
        blit->srcy = dirty->fb_y;
        blit->x = dirty->unit_x1;
        blit->y = dirty->unit_y1;
        blit->d = 1;
        blit->w = dirty->unit_x2 - dirty->unit_x1;
        blit->h = dirty->unit_y2 - dirty->unit_y1;
        dirty->num_hits++;

        if (ddirty->transfer != SVGA3D_WRITE_HOST_VRAM)
                return;

        /* Destination bounding box */
        ddirty->left = min_t(s32, ddirty->left, dirty->unit_x1);
        ddirty->top = min_t(s32, ddirty->top, dirty->unit_y1);
        ddirty->right = max_t(s32, ddirty->right, dirty->unit_x2);
        ddirty->bottom = max_t(s32, ddirty->bottom, dirty->unit_y2);
}

/**
 * vmw_stdu_dmabuf_fifo_commit - Callback to fill in and submit a DMA command.
 *
 * @dirty: The closure structure.
 *
 * Fills in the missing fields in a DMA command, and optionally encodes
 * a screen target update command, depending on transfer direction.
 */
static void vmw_stdu_dmabuf_fifo_commit(struct vmw_kms_dirty *dirty)
{
        struct vmw_stdu_dirty *ddirty =
                container_of(dirty, struct vmw_stdu_dirty, base);
        struct vmw_screen_target_display_unit *stdu =
                container_of(dirty->unit, typeof(*stdu), base);
        struct vmw_stdu_dma *cmd = dirty->cmd;
        struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];
        SVGA3dCmdSurfaceDMASuffix *suffix =
                (SVGA3dCmdSurfaceDMASuffix *) &blit[dirty->num_hits];
        size_t blit_size = sizeof(*blit) * dirty->num_hits + sizeof(*suffix);

        if (!dirty->num_hits) {
                vmw_fifo_commit(dirty->dev_priv, 0);
                return;
        }

        cmd->header.id = SVGA_3D_CMD_SURFACE_DMA;
        cmd->header.size = sizeof(cmd->body) + blit_size;
        vmw_bo_get_guest_ptr(&ddirty->buf->base, &cmd->body.guest.ptr);
        cmd->body.guest.pitch = ddirty->pitch;
        cmd->body.host.sid = stdu->display_srf->res.id;
        cmd->body.host.face = 0;
        cmd->body.host.mipmap = 0;
        cmd->body.transfer = ddirty->transfer;
        suffix->suffixSize = sizeof(*suffix);
        suffix->maximumOffset = ddirty->buf->base.num_pages * PAGE_SIZE;

        if (ddirty->transfer == SVGA3D_WRITE_HOST_VRAM) {
                blit_size += sizeof(struct vmw_stdu_update);

                vmw_stdu_populate_update(&suffix[1], stdu->base.unit,
                                         ddirty->left, ddirty->right,
                                         ddirty->top, ddirty->bottom);
        }

        vmw_fifo_commit(dirty->dev_priv, sizeof(*cmd) + blit_size);

        ddirty->left = ddirty->top = S32_MAX;
        ddirty->right = ddirty->bottom = S32_MIN;
}

/**
 * vmw_kms_stdu_dma - Perform a DMA transfer between a dma-buffer backed
 * framebuffer and the screen target system.
 *
 * @dev_priv: Pointer to the device private structure.
 * @file_priv: Pointer to a struct drm-file identifying the caller. May be
 * set to NULL, but then @user_fence_rep must also be set to NULL.
 * @vfb: Pointer to the dma-buffer backed framebuffer.
 * @clips: Array of clip rects. Either @clips or @vclips must be NULL.
 * @vclips: Alternate array of clip rects. Either @clips or @vclips must
 * be NULL.
 * @num_clips: Number of clip rects in @clips or @vclips.
 * @increment: Increment to use when looping over @clips or @vclips.
 * @to_surface: Whether to DMA to the screen target system as opposed to
 * from the screen target system.
 * @interruptible: Whether to perform waits interruptible if possible.
 *
 * If DMA-ing till the screen target system, the function will also notify
 * the screen target system that a bounding box of the cliprects has been
 * updated.
 * Returns 0 on success, negative error code on failure. -ERESTARTSYS if
 * interrupted.
 */
int vmw_kms_stdu_dma(struct vmw_private *dev_priv,
                     struct drm_file *file_priv,
                     struct vmw_framebuffer *vfb,
                     struct drm_vmw_fence_rep __user *user_fence_rep,
                     struct drm_clip_rect *clips,
                     struct drm_vmw_rect *vclips,
                     uint32_t num_clips,
                     int increment,
                     bool to_surface,
                     bool interruptible)
{
        struct vmw_dma_buffer *buf =
                container_of(vfb, struct vmw_framebuffer_dmabuf, base)->buffer;
        struct vmw_stdu_dirty ddirty;
        int ret;

        ret = vmw_kms_helper_buffer_prepare(dev_priv, buf, interruptible,
                                            false);
        if (ret)
                return ret;

        ddirty.transfer = (to_surface) ? SVGA3D_WRITE_HOST_VRAM :
                SVGA3D_READ_HOST_VRAM;
        ddirty.left = ddirty.top = S32_MAX;
        ddirty.right = ddirty.bottom = S32_MIN;
        ddirty.pitch = vfb->base.pitches[0];
        ddirty.buf = buf;
        ddirty.base.fifo_commit = vmw_stdu_dmabuf_fifo_commit;
        ddirty.base.clip = vmw_stdu_dmabuf_clip;
        ddirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_dma) +
                num_clips * sizeof(SVGA3dCopyBox) +
                sizeof(SVGA3dCmdSurfaceDMASuffix);
        if (to_surface)
                ddirty.base.fifo_reserve_size += sizeof(struct vmw_stdu_update);

        ret = vmw_kms_helper_dirty(dev_priv, vfb, clips, vclips,
                                   0, 0, num_clips, increment, &ddirty.base);
        vmw_kms_helper_buffer_finish(dev_priv, file_priv, buf, NULL,
                                     user_fence_rep);

        return ret;
}

/**
 * vmw_stdu_surface_clip - Callback to encode a surface copy command cliprect
 *
 * @dirty: The closure structure.
 *
 * Encodes a surface copy command cliprect and updates the bounding box
 * for the copy.
 */
static void vmw_kms_stdu_surface_clip(struct vmw_kms_dirty *dirty)
{
        struct vmw_stdu_dirty *sdirty =
                container_of(dirty, struct vmw_stdu_dirty, base);
        struct vmw_stdu_surface_copy *cmd = dirty->cmd;
        struct vmw_screen_target_display_unit *stdu =
                container_of(dirty->unit, typeof(*stdu), base);

        if (sdirty->sid != stdu->display_srf->res.id) {
                struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];

                blit += dirty->num_hits;
                blit->srcx = dirty->fb_x;
                blit->srcy = dirty->fb_y;
                blit->x = dirty->unit_x1;
                blit->y = dirty->unit_y1;
                blit->d = 1;
                blit->w = dirty->unit_x2 - dirty->unit_x1;
                blit->h = dirty->unit_y2 - dirty->unit_y1;
        }

        dirty->num_hits++;

        /* Destination bounding box */
        sdirty->left = min_t(s32, sdirty->left, dirty->unit_x1);
        sdirty->top = min_t(s32, sdirty->top, dirty->unit_y1);
        sdirty->right = max_t(s32, sdirty->right, dirty->unit_x2);
        sdirty->bottom = max_t(s32, sdirty->bottom, dirty->unit_y2);
}

/**
 * vmw_stdu_surface_fifo_commit - Callback to fill in and submit a surface
 * copy command.
 *
 * @dirty: The closure structure.
 *
 * Fills in the missing fields in a surface copy command, and encodes a screen
 * target update command.
 */
static void vmw_kms_stdu_surface_fifo_commit(struct vmw_kms_dirty *dirty)
{
        struct vmw_stdu_dirty *sdirty =
                container_of(dirty, struct vmw_stdu_dirty, base);
        struct vmw_screen_target_display_unit *stdu =
                container_of(dirty->unit, typeof(*stdu), base);
        struct vmw_stdu_surface_copy *cmd = dirty->cmd;
        struct vmw_stdu_update *update;
        size_t blit_size = sizeof(SVGA3dCopyBox) * dirty->num_hits;
        size_t commit_size;

        if (!dirty->num_hits) {
                vmw_fifo_commit(dirty->dev_priv, 0);
                return;
        }

        if (sdirty->sid != stdu->display_srf->res.id) {
                struct SVGA3dCopyBox *blit = (struct SVGA3dCopyBox *) &cmd[1];

                cmd->header.id = SVGA_3D_CMD_SURFACE_COPY;
                cmd->header.size = sizeof(cmd->body) + blit_size;
                cmd->body.src.sid = sdirty->sid;
                cmd->body.dest.sid = stdu->display_srf->res.id;
                update = (struct vmw_stdu_update *) &blit[dirty->num_hits];
                commit_size = sizeof(*cmd) + blit_size + sizeof(*update);
        } else {
                update = dirty->cmd;
                commit_size = sizeof(*update);
        }

        vmw_stdu_populate_update(update, stdu->base.unit, sdirty->left,
                                 sdirty->right, sdirty->top, sdirty->bottom);

        vmw_fifo_commit(dirty->dev_priv, commit_size);

        sdirty->left = sdirty->top = S32_MAX;
        sdirty->right = sdirty->bottom = S32_MIN;
}

/**
 * vmw_kms_stdu_surface_dirty - Dirty part of a surface backed framebuffer
 *
 * @dev_priv: Pointer to the device private structure.
 * @framebuffer: Pointer to the surface-buffer backed framebuffer.
 * @clips: Array of clip rects. Either @clips or @vclips must be NULL.
 * @vclips: Alternate array of clip rects. Either @clips or @vclips must
 * be NULL.
 * @srf: Pointer to surface to blit from. If NULL, the surface attached
 * to @framebuffer will be used.
 * @dest_x: X coordinate offset to align @srf with framebuffer coordinates.
 * @dest_y: Y coordinate offset to align @srf with framebuffer coordinates.
 * @num_clips: Number of clip rects in @clips.
 * @inc: Increment to use when looping over @clips.
 * @out_fence: If non-NULL, will return a ref-counted pointer to a
 * struct vmw_fence_obj. The returned fence pointer may be NULL in which
 * case the device has already synchronized.
 *
 * Returns 0 on success, negative error code on failure. -ERESTARTSYS if
 * interrupted.
 */
int vmw_kms_stdu_surface_dirty(struct vmw_private *dev_priv,
                               struct vmw_framebuffer *framebuffer,
                               struct drm_clip_rect *clips,
                               struct drm_vmw_rect *vclips,
                               struct vmw_resource *srf,
                               s32 dest_x,
                               s32 dest_y,
                               unsigned num_clips, int inc,
                               struct vmw_fence_obj **out_fence)
{
        struct vmw_framebuffer_surface *vfbs =
                container_of(framebuffer, typeof(*vfbs), base);
        struct vmw_stdu_dirty sdirty;
        int ret;

        if (!srf)
                srf = &vfbs->surface->res;

        ret = vmw_kms_helper_resource_prepare(srf, true);
        if (ret)
                return ret;

        if (vfbs->is_dmabuf_proxy) {
                ret = vmw_kms_update_proxy(srf, clips, num_clips, inc);
                if (ret)
                        goto out_finish;
        }

        sdirty.base.fifo_commit = vmw_kms_stdu_surface_fifo_commit;
        sdirty.base.clip = vmw_kms_stdu_surface_clip;
        sdirty.base.fifo_reserve_size = sizeof(struct vmw_stdu_surface_copy) +
                sizeof(SVGA3dCopyBox) * num_clips +
                sizeof(struct vmw_stdu_update);
        sdirty.sid = srf->id;
        sdirty.left = sdirty.top = S32_MAX;
        sdirty.right = sdirty.bottom = S32_MIN;

        ret = vmw_kms_helper_dirty(dev_priv, framebuffer, clips, vclips,
                                   dest_x, dest_y, num_clips, inc,
                                   &sdirty.base);
out_finish:
        vmw_kms_helper_resource_finish(srf, out_fence);

        return ret;
}


/*
 *  Screen Target CRTC dispatch table
 */
static struct drm_crtc_funcs vmw_stdu_crtc_funcs = {
        .save = vmw_du_crtc_save,
        .restore = vmw_du_crtc_restore,
        .cursor_set = vmw_du_crtc_cursor_set,
        .cursor_move = vmw_du_crtc_cursor_move,
        .gamma_set = vmw_du_crtc_gamma_set,
        .destroy = vmw_stdu_crtc_destroy,
        .set_config = vmw_stdu_crtc_set_config,
        .page_flip = vmw_stdu_crtc_page_flip,
};



/******************************************************************************
 * Screen Target Display Unit Encoder Functions
 *****************************************************************************/

/**
 * vmw_stdu_encoder_destroy - cleans up the STDU
 *
 * @encoder: used the get the containing STDU
 *
 * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
 * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
 * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
 * get called.
 */
static void vmw_stdu_encoder_destroy(struct drm_encoder *encoder)
{
        vmw_stdu_destroy(vmw_encoder_to_stdu(encoder));
}

static struct drm_encoder_funcs vmw_stdu_encoder_funcs = {
        .destroy = vmw_stdu_encoder_destroy,
};



/******************************************************************************
 * Screen Target Display Unit Connector Functions
 *****************************************************************************/

/**
 * vmw_stdu_connector_destroy - cleans up the STDU
 *
 * @connector: used to get the containing STDU
 *
 * vmwgfx cleans up crtc/encoder/connector all at the same time so technically
 * this can be a no-op.  Nevertheless, it doesn't hurt of have this in case
 * the common KMS code changes and somehow vmw_stdu_crtc_destroy() doesn't
 * get called.
 */
static void vmw_stdu_connector_destroy(struct drm_connector *connector)
{
        vmw_stdu_destroy(vmw_connector_to_stdu(connector));
}



static struct drm_connector_funcs vmw_stdu_connector_funcs = {
        .dpms = vmw_du_connector_dpms,
        .save = vmw_du_connector_save,
        .restore = vmw_du_connector_restore,
        .detect = vmw_du_connector_detect,
        .fill_modes = vmw_du_connector_fill_modes,
        .set_property = vmw_du_connector_set_property,
        .destroy = vmw_stdu_connector_destroy,
};



/**
 * vmw_stdu_init - Sets up a Screen Target Display Unit
 *
 * @dev_priv: VMW DRM device
 * @unit: unit number range from 0 to VMWGFX_NUM_DISPLAY_UNITS
 *
 * This function is called once per CRTC, and allocates one Screen Target
 * display unit to represent that CRTC.  Since the SVGA device does not separate
 * out encoder and connector, they are represented as part of the STDU as well.
 */
static int vmw_stdu_init(struct vmw_private *dev_priv, unsigned unit)
{
        struct vmw_screen_target_display_unit *stdu;
        struct drm_device *dev = dev_priv->dev;
        struct drm_connector *connector;
        struct drm_encoder *encoder;
        struct drm_crtc *crtc;


        stdu = kzalloc(sizeof(*stdu), GFP_KERNEL);
        if (!stdu)
                return -ENOMEM;

        stdu->base.unit = unit;
        crtc = &stdu->base.crtc;
        encoder = &stdu->base.encoder;
        connector = &stdu->base.connector;

        stdu->base.pref_active = (unit == 0);
        stdu->base.pref_width  = dev_priv->initial_width;
        stdu->base.pref_height = dev_priv->initial_height;
        stdu->base.is_implicit = true;

        drm_connector_init(dev, connector, &vmw_stdu_connector_funcs,
                           DRM_MODE_CONNECTOR_VIRTUAL);
        connector->status = vmw_du_connector_detect(connector, false);

        drm_encoder_init(dev, encoder, &vmw_stdu_encoder_funcs,
                         DRM_MODE_ENCODER_VIRTUAL);
        drm_mode_connector_attach_encoder(connector, encoder);
        encoder->possible_crtcs = (1 << unit);
        encoder->possible_clones = 0;

        (void) drm_connector_register(connector);

        drm_crtc_init(dev, crtc, &vmw_stdu_crtc_funcs);

        drm_mode_crtc_set_gamma_size(crtc, 256);

        drm_object_attach_property(&connector->base,
                                   dev->mode_config.dirty_info_property,
                                   1);

        return 0;
}



/**
 *  vmw_stdu_destroy - Cleans up a vmw_screen_target_display_unit
 *
 *  @stdu:  Screen Target Display Unit to be destroyed
 *
 *  Clean up after vmw_stdu_init
 */
static void vmw_stdu_destroy(struct vmw_screen_target_display_unit *stdu)
{
        vmw_stdu_unpin_display(stdu);

        vmw_du_cleanup(&stdu->base);
        kfree(stdu);
}



/******************************************************************************
 * Screen Target Display KMS Functions
 *
 * These functions are called by the common KMS code in vmwgfx_kms.c
 *****************************************************************************/

/**
 * vmw_kms_stdu_init_display - Initializes a Screen Target based display
 *
 * @dev_priv: VMW DRM device
 *
 * This function initialize a Screen Target based display device.  It checks
 * the capability bits to make sure the underlying hardware can support
 * screen targets, and then creates the maximum number of CRTCs, a.k.a Display
 * Units, as supported by the display hardware.
 *
 * RETURNS:
 * 0 on success, error code otherwise
 */
int vmw_kms_stdu_init_display(struct vmw_private *dev_priv)
{
        struct drm_device *dev = dev_priv->dev;
        int i, ret;


        /* Do nothing if Screen Target support is turned off */
        if (!VMWGFX_ENABLE_SCREEN_TARGET_OTABLE)
                return -ENOSYS;

        if (!(dev_priv->capabilities & SVGA_CAP_GBOBJECTS))
                return -ENOSYS;

        ret = drm_vblank_init(dev, VMWGFX_NUM_DISPLAY_UNITS);
        if (unlikely(ret != 0))
                return ret;

        ret = drm_mode_create_dirty_info_property(dev);
        if (unlikely(ret != 0))
                goto err_vblank_cleanup;

        dev_priv->active_display_unit = vmw_du_screen_target;

        for (i = 0; i < VMWGFX_NUM_DISPLAY_UNITS; ++i) {
                ret = vmw_stdu_init(dev_priv, i);

                if (unlikely(ret != 0)) {
                        DRM_ERROR("Failed to initialize STDU %d", i);
                        goto err_vblank_cleanup;
                }
        }

        DRM_INFO("Screen Target Display device initialized\n");

        return 0;

err_vblank_cleanup:
        drm_vblank_cleanup(dev);
        return ret;
}



/**
 * vmw_kms_stdu_close_display - Cleans up after vmw_kms_stdu_init_display
 *
 * @dev_priv: VMW DRM device
 *
 * Frees up any resources allocated by vmw_kms_stdu_init_display
 *
 * RETURNS:
 * 0 on success
 */
int vmw_kms_stdu_close_display(struct vmw_private *dev_priv)
{
        struct drm_device *dev = dev_priv->dev;

        drm_vblank_cleanup(dev);

        return 0;
}