1 # SPDX-License-Identifier: GPL-2.0
3 # USB Dual Role (OTG-ready) Controller Drivers
4 # for silicon based on Mentor Graphics INVENTRA designs
7 # (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
9 tristate 'Inventra Highspeed Dual Role Controller'
10 depends on (USB || USB_GADGET)
13 Say Y here if your system has a dual role high speed USB
14 controller based on the Mentor Graphics silicon IP. Then
15 configure options to match your silicon and the board
16 it's being used with, including the USB peripheral role,
17 or the USB host role, or both.
19 Texas Instruments families using this IP include DaVinci
20 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
22 Allwinner SoCs using this IP include A10, A13, A20, ...
24 If you do not know what this is, please say N.
26 To compile this driver as a module, choose M here; the
27 module will be called "musb-hdrc".
32 bool "MUSB Mode Selection"
33 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
34 default USB_MUSB_HOST if (USB && !USB_GADGET)
35 default USB_MUSB_GADGET if (!USB && USB_GADGET)
39 depends on USB=y || USB=USB_MUSB_HDRC
41 Select this when you want to use MUSB in host mode only,
42 thereby the gadget feature will be regressed.
44 config USB_MUSB_GADGET
45 bool "Gadget only mode"
46 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
49 Select this when you want to use MUSB in gadget mode only,
50 thereby the host feature will be regressed.
52 config USB_MUSB_DUAL_ROLE
54 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
57 This is the default mode of working of MUSB controller where
58 both host and gadget features are enabled.
62 comment "Platform Glue Layer"
65 tristate "Allwinner (sunxi)"
67 depends on NOP_USB_XCEIV
68 depends on PHY_SUN4I_USB
73 config USB_MUSB_DAVINCI
75 depends on ARCH_DAVINCI_DMx
76 depends on NOP_USB_XCEIV
80 tristate "DA8xx/OMAP-L1x"
81 depends on ARCH_DAVINCI_DA8XX
82 depends on NOP_USB_XCEIV
85 config USB_MUSB_TUSB6010
88 depends on ARCH_OMAP2PLUS || COMPILE_TEST
89 depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m
91 config USB_MUSB_OMAP2PLUS
92 tristate "OMAP2430 and onwards"
93 depends on ARCH_OMAP2PLUS && USB
94 depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
100 depends on NOP_USB_XCEIV
103 tristate "TI DSPS platforms"
104 depends on ARCH_OMAP2PLUS || COMPILE_TEST
107 config USB_MUSB_UX500
108 tristate "Ux500 platforms"
109 depends on ARCH_U8500 || COMPILE_TEST
111 config USB_MUSB_JZ4740
114 depends on MIPS || COMPILE_TEST
115 depends on USB_MUSB_GADGET
116 depends on USB=n || USB_OTG_DISABLE_EXTERNAL_HUB
117 select USB_ROLE_SWITCH
119 config USB_MUSB_MEDIATEK
120 tristate "MediaTek platforms"
121 depends on ARCH_MEDIATEK || COMPILE_TEST
122 depends on NOP_USB_XCEIV
124 select USB_ROLE_SWITCH
126 config USB_MUSB_POLARFIRE_SOC
127 tristate "Microchip PolarFire SoC platforms"
128 depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
129 depends on NOP_USB_XCEIV
130 select USB_MUSB_DUAL_ROLE
132 Say Y here to enable support for USB on Microchip's PolarFire SoC.
134 This support is also available as a module. If so, the module
137 comment "MUSB DMA mode"
140 bool 'Disable DMA (always use PIO)'
142 All data is copied between memory and FIFO by the CPU.
143 DMA controllers are ignored.
145 Do not choose this unless DMA support for your SOC or board
146 is unavailable (or unstable). When DMA is enabled at compile time,
147 you can still disable it at run time using the "use_dma=n" module
153 bool 'ST Ericsson Ux500'
154 depends on USB_MUSB_UX500
156 Enable DMA transfers on UX500 platforms.
158 config USB_INVENTRA_DMA
160 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC
162 Enable DMA transfers using Mentor's engine.
164 config USB_TI_CPPI_DMA
165 bool 'TI CPPI (Davinci)'
166 depends on USB_MUSB_DAVINCI
168 Enable DMA transfers when TI CPPI DMA is available.
170 config USB_TI_CPPI41_DMA
172 depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
175 config USB_TUSB_OMAP_DMA
177 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
180 Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
182 endif # !MUSB_PIO_ONLY
184 endif # USB_MUSB_HDRC