]> git.ipfire.org Git - people/ms/u-boot.git/blame - arch/arm/mach-mvebu/include/mach/config.h
configs: Re-sync with cmd/Kconfig
[people/ms/u-boot.git] / arch / arm / mach-mvebu / include / mach / config.h
CommitLineData
41e5ee54
SR
1/*
2 * (C) Copyright 2011
3 * Marvell Semiconductor <www.marvell.com>
4 * Written-by: Lei Wen <leiwen@marvell.com>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9/*
10 * This file should be included in board config header file.
11 *
f7c0ef07 12 * It supports common definitions for MVEBU platforms
41e5ee54
SR
13 */
14
250eea74
SR
15#ifndef _MVEBU_CONFIG_H
16#define _MVEBU_CONFIG_H
41e5ee54
SR
17
18#include <asm/arch/soc.h>
19
09e89ab4
SR
20#if defined(CONFIG_ARMADA_XP) || defined(CONFIG_ARMADA_375) \
21 || defined(CONFIG_ARMADA_38X)
81e33f4b
SR
22/*
23 * Set this for the common xor register definitions needed in dram.c
24 * for A38x as well here.
25 */
41e5ee54 26#define MV88F78X60 /* for the DDR training bin_hdr code */
f7c0ef07 27#endif
41e5ee54
SR
28
29#define CONFIG_SYS_CACHELINE_SIZE 32
30
8a02ec1d
SR
31#define CONFIG_SYS_L2_PL310
32
33#ifdef CONFIG_SPL_BUILD
34#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
35#endif
36
41e5ee54
SR
37/*
38 * By default kwbimage.cfg from board specific folder is used
39 * If for some board, different configuration file need to be used,
40 * CONFIG_SYS_KWD_CONFIG should be defined in board specific header file
41 */
42#ifndef CONFIG_SYS_KWD_CONFIG
43#define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage.cfg
44#endif /* CONFIG_SYS_KWD_CONFIG */
45
46/* Add target to build it automatically upon "make" */
1e0b5984
SR
47#ifdef CONFIG_SPL
48#define CONFIG_BUILD_TARGET "u-boot-spl.kwb"
1e0b5984 49#endif
41e5ee54
SR
50
51/* end of 16M scrubbed by training in bootrom */
52#define CONFIG_SYS_INIT_SP_ADDR 0x00FF0000
53#define CONFIG_NR_DRAM_BANKS_MAX 2
54
55#define MV_UART_CONSOLE_BASE MVEBU_UART0_BASE
56
57/*
58 * SPI Flash configuration
59 */
60#ifdef CONFIG_CMD_SF
09a54c00 61#define CONFIG_KIRKWOOD_SPI
41e5ee54
SR
62#ifndef CONFIG_ENV_SPI_BUS
63# define CONFIG_ENV_SPI_BUS 0
64#endif
65#ifndef CONFIG_ENV_SPI_CS
66# define CONFIG_ENV_SPI_CS 0
67#endif
68#ifndef CONFIG_ENV_SPI_MAX_HZ
69# define CONFIG_ENV_SPI_MAX_HZ 50000000
70#endif
71#endif
72
09a54c00
SR
73/* Needed for SPI NOR booting in SPL */
74#define CONFIG_DM_SEQ_ALIAS 1
75
41e5ee54
SR
76/*
77 * Ethernet Driver configuration
78 */
79#ifdef CONFIG_CMD_NET
41e5ee54 80#define CONFIG_MII /* expose smi ove miiphy interface */
09e89ab4 81#if !defined(CONFIG_ARMADA_375)
41e5ee54
SR
82#define CONFIG_MVNETA /* Enable Marvell Gbe Controller Driver */
83#define CONFIG_PHYLIB
09e89ab4 84#endif
41e5ee54
SR
85#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
86#define CONFIG_PHY_GIGE /* GbE speed/duplex detect */
9eb14cc4
SR
87#define CONFIG_ARP_TIMEOUT 200
88#define CONFIG_NET_RETRY_COUNT 50
41e5ee54
SR
89#endif /* CONFIG_CMD_NET */
90
91/*
92 * I2C related stuff
93 */
94#ifdef CONFIG_CMD_I2C
95#ifndef CONFIG_SYS_I2C_SOFT
96#define CONFIG_I2C_MVTWSI
97#endif
98#define CONFIG_SYS_I2C_SLAVE 0x0
99#define CONFIG_SYS_I2C_SPEED 100000
100#endif
101
2fbc18fe
SR
102/* Use common timer */
103#define CONFIG_SYS_TIMER_COUNTS_DOWN
104#define CONFIG_SYS_TIMER_COUNTER (MVEBU_TIMER_BASE + 0x14)
105#define CONFIG_SYS_TIMER_RATE 25000000
106
250eea74 107#endif /* __MVEBU_CONFIG_H */