[people/ms/u-boot.git] / board / vscom / baltos / board.c

/*
 * board.c
 *
 * Board functions for TI AM335X based boards
 *
 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#include <common.h>
#include <errno.h>
#include <libfdt.h>
#include <spl.h>
#include <asm/arch/cpu.h>
#include <asm/arch/hardware.h>
#include <asm/arch/omap.h>
#include <asm/arch/ddr_defs.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/io.h>
#include <asm/emif.h>
#include <asm/gpio.h>
#include <i2c.h>
#include <miiphy.h>
#include <cpsw.h>
#include <power/tps65217.h>
#include <power/tps65910.h>
#include <environment.h>
#include <watchdog.h>
#include "board.h"

DECLARE_GLOBAL_DATA_PTR;

/* GPIO that controls power to DDR on EVM-SK */
#define GPIO_DDR_VTT_EN		7
#define DIP_S1			44
#define MPCIE_SW		100

static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;

static int baltos_set_console(void)
{
	int val, i, dips = 0;
	char buf[7];

	for (i = 0; i < 4; i++) {
		sprintf(buf, "dip_s%d", i + 1);

		if (gpio_request(DIP_S1 + i, buf)) {
			printf("failed to export GPIO %d\n", DIP_S1 + i);
			return 0;
		}

		if (gpio_direction_input(DIP_S1 + i)) {
			printf("failed to set GPIO %d direction\n", DIP_S1 + i);
			return 0;
		}

		val = gpio_get_value(DIP_S1 + i);
		dips |= val << i;
	}

	printf("DIPs: 0x%1x\n", (~dips) & 0xf);

	if ((dips & 0xf) == 0xe)
		env_set("console", "ttyUSB0,115200n8");

	return 0;
}

static int read_eeprom(BSP_VS_HWPARAM *header)
{
	i2c_set_bus_num(1);

	/* Check if baseboard eeprom is available */
	if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
		puts("Could not probe the EEPROM; something fundamentally "
			"wrong on the I2C bus.\n");
		return -ENODEV;
	}

	/* read the eeprom using i2c */
	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
		     sizeof(BSP_VS_HWPARAM))) {
		puts("Could not read the EEPROM; something fundamentally"
			" wrong on the I2C bus.\n");
		return -EIO;
	}

	if (header->Magic != 0xDEADBEEF) {

		printf("Incorrect magic number (0x%x) in EEPROM\n",
				header->Magic);

		/* fill default values */
		header->SystemId = 211;
		header->MAC1[0] = 0x00;
		header->MAC1[1] = 0x00;
		header->MAC1[2] = 0x00;
		header->MAC1[3] = 0x00;
		header->MAC1[4] = 0x00;
		header->MAC1[5] = 0x01;

		header->MAC2[0] = 0x00;
		header->MAC2[1] = 0x00;
		header->MAC2[2] = 0x00;
		header->MAC2[3] = 0x00;
		header->MAC2[4] = 0x00;
		header->MAC2[5] = 0x02;

		header->MAC3[0] = 0x00;
		header->MAC3[1] = 0x00;
		header->MAC3[2] = 0x00;
		header->MAC3[3] = 0x00;
		header->MAC3[4] = 0x00;
		header->MAC3[5] = 0x03;
	}

	return 0;
}

#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)

static const struct ddr_data ddr3_baltos_data = {
	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
};

static const struct cmd_control ddr3_baltos_cmd_ctrl_data = {
	.cmd0csratio = MT41K256M16HA125E_RATIO,
	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,

	.cmd1csratio = MT41K256M16HA125E_RATIO,
	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,

	.cmd2csratio = MT41K256M16HA125E_RATIO,
	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
};

static struct emif_regs ddr3_baltos_emif_reg_data = {
	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
	.zq_config = MT41K256M16HA125E_ZQ_CFG,
	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
};

#ifdef CONFIG_SPL_OS_BOOT
int spl_start_uboot(void)
{
	/* break into full u-boot on 'c' */
	return (serial_tstc() && serial_getc() == 'c');
}
#endif

#define OSC	(V_OSCK/1000000)
const struct dpll_params dpll_ddr = {
		266, OSC-1, 1, -1, -1, -1, -1};
const struct dpll_params dpll_ddr_evm_sk = {
		303, OSC-1, 1, -1, -1, -1, -1};
const struct dpll_params dpll_ddr_baltos = {
		400, OSC-1, 1, -1, -1, -1, -1};

void am33xx_spl_board_init(void)
{
	int mpu_vdd;
	int sil_rev;

	/* Get the frequency */
	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);

	/*
	 * The GP EVM, IDK and EVM SK use a TPS65910 PMIC.  For all
	 * MPU frequencies we support we use a CORE voltage of
	 * 1.1375V.  For MPU voltage we need to switch based on
	 * the frequency we are running at.
	 */
	i2c_set_bus_num(1);

	printf("I2C speed: %d Hz\n", CONFIG_SYS_OMAP24_I2C_SPEED);

	if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) {
		puts("i2c: cannot access TPS65910\n");
		return;
	}

	/*
	 * Depending on MPU clock and PG we will need a different
	 * VDD to drive at that speed.
	 */
	sil_rev = readl(&cdev->deviceid) >> 28;
	mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
					      dpll_mpu_opp100.m);

	/* Tell the TPS65910 to use i2c */
	tps65910_set_i2c_control();

	/* First update MPU voltage. */
	if (tps65910_voltage_update(MPU, mpu_vdd))
		return;

	/* Second, update the CORE voltage. */
	if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
		return;

	/* Set CORE Frequencies to OPP100 */
	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);

	/* Set MPU Frequency to what we detected now that voltages are set */
	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);

	writel(0x000010ff, PRM_DEVICE_INST + 4);
}

const struct dpll_params *get_dpll_ddr_params(void)
{
	enable_i2c1_pin_mux();
	i2c_set_bus_num(1);

	return &dpll_ddr_baltos;
}

void set_uart_mux_conf(void)
{
	enable_uart0_pin_mux();
}

void set_mux_conf_regs(void)
{
	enable_board_pin_mux();
}

const struct ctrl_ioregs ioregs_baltos = {
	.cm0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
	.cm1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
	.cm2ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
	.dt0ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
	.dt1ioctl		= MT41K256M16HA125E_IOCTRL_VALUE,
};

void sdram_init(void)
{
	gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
	gpio_direction_output(GPIO_DDR_VTT_EN, 1);

	config_ddr(400, &ioregs_baltos,
		   &ddr3_baltos_data,
		   &ddr3_baltos_cmd_ctrl_data,
		   &ddr3_baltos_emif_reg_data, 0);
}
#endif

/*
 * Basic board specific setup.  Pinmux has been handled already.
 */
int board_init(void)
{
#if defined(CONFIG_HW_WATCHDOG)
	hw_watchdog_init();
#endif

	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
#if defined(CONFIG_NOR) || defined(CONFIG_NAND)
	gpmc_init();
#endif
	return 0;
}

int ft_board_setup(void *blob, bd_t *bd)
{
	int node, ret;
	unsigned char mac_addr[6];
	BSP_VS_HWPARAM header;

	/* get production data */
	if (read_eeprom(&header))
		return 0;

	/* setup MAC1 */
	mac_addr[0] = header.MAC1[0];
	mac_addr[1] = header.MAC1[1];
	mac_addr[2] = header.MAC1[2];
	mac_addr[3] = header.MAC1[3];
	mac_addr[4] = header.MAC1[4];
	mac_addr[5] = header.MAC1[5];


	node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100200");
	if (node < 0) {
		printf("no /soc/fman/ethernet path offset\n");
		return -ENODEV;
	}

	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
	if (ret) {
		printf("error setting local-mac-address property\n");
		return -ENODEV;
	}

	/* setup MAC2 */
	mac_addr[0] = header.MAC2[0];
	mac_addr[1] = header.MAC2[1];
	mac_addr[2] = header.MAC2[2];
	mac_addr[3] = header.MAC2[3];
	mac_addr[4] = header.MAC2[4];
	mac_addr[5] = header.MAC2[5];

	node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100300");
	if (node < 0) {
		printf("no /soc/fman/ethernet path offset\n");
		return -ENODEV;
	}

	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
	if (ret) {
		printf("error setting local-mac-address property\n");
		return -ENODEV;
	}

	printf("\nFDT was successfully setup\n");

	return 0;
}

static struct module_pin_mux pcie_sw_pin_mux[] = {
	{OFFSET(mii1_rxdv), (MODE(7) | PULLUDEN )},     /* GPIO3_4 */
	{-1},
};

static struct module_pin_mux dip_pin_mux[] = {
	{OFFSET(gpmc_ad12), (MODE(7) | RXACTIVE )},	/* GPIO1_12 */
	{OFFSET(gpmc_ad13), (MODE(7)  | RXACTIVE )},	/* GPIO1_13 */
	{OFFSET(gpmc_ad14), (MODE(7)  | RXACTIVE )},	/* GPIO1_14 */
	{OFFSET(gpmc_ad15), (MODE(7)  | RXACTIVE )},	/* GPIO1_15 */
	{-1},
};

#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	BSP_VS_HWPARAM header;
	char model[4];

	/* get production data */
	if (read_eeprom(&header)) {
		strcpy(model, "211");
	} else {
		sprintf(model, "%d", header.SystemId);
		if (header.SystemId == 215) {
			configure_module_pin_mux(dip_pin_mux);
			baltos_set_console();
		}
	}

	/* turn power for the mPCIe slot */
	configure_module_pin_mux(pcie_sw_pin_mux);
	if (gpio_request(MPCIE_SW, "mpcie_sw")) {
		printf("failed to export GPIO %d\n", MPCIE_SW);
		return -ENODEV;
	}
	if (gpio_direction_output(MPCIE_SW, 1)) {
		printf("failed to set GPIO %d direction\n", MPCIE_SW);
		return -ENODEV;
	}

	env_set("board_name", model);
#endif

	return 0;
}
#endif

#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
static void cpsw_control(int enabled)
{
	/* VTP can be added here */

	return;
}

static struct cpsw_slave_data cpsw_slaves[] = {
	{
		.slave_reg_ofs	= 0x208,
		.sliver_reg_ofs	= 0xd80,
		.phy_addr	= 0,
	},
	{
		.slave_reg_ofs	= 0x308,
		.sliver_reg_ofs	= 0xdc0,
		.phy_addr	= 7,
	},
};

static struct cpsw_platform_data cpsw_data = {
	.mdio_base		= CPSW_MDIO_BASE,
	.cpsw_base		= CPSW_BASE,
	.mdio_div		= 0xff,
	.channels		= 8,
	.cpdma_reg_ofs		= 0x800,
	.slaves			= 2,
	.slave_data		= cpsw_slaves,
	.active_slave		= 1,
	.ale_reg_ofs		= 0xd00,
	.ale_entries		= 1024,
	.host_port_reg_ofs	= 0x108,
	.hw_stats_reg_ofs	= 0x900,
	.bd_ram_ofs		= 0x2000,
	.mac_control		= (1 << 5),
	.control		= cpsw_control,
	.host_port_num		= 0,
	.version		= CPSW_CTRL_VERSION_2,
};
#endif

#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
		&& defined(CONFIG_SPL_BUILD)) || \
	((defined(CONFIG_DRIVER_TI_CPSW) || \
	  defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
	 !defined(CONFIG_SPL_BUILD))
int board_eth_init(bd_t *bis)
{
	int rv, n = 0;
	uint8_t mac_addr[6];
	uint32_t mac_hi, mac_lo;

	/*
	 * Note here that we're using CPSW1 since that has a 1Gbit PHY while
	 * CSPW0 has a 100Mbit PHY.
	 *
	 * On product, CPSW1 maps to port labeled WAN.
	 */

	/* try reading mac address from efuse */
	mac_lo = readl(&cdev->macid1l);
	mac_hi = readl(&cdev->macid1h);
	mac_addr[0] = mac_hi & 0xFF;
	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
	mac_addr[4] = mac_lo & 0xFF;
	mac_addr[5] = (mac_lo & 0xFF00) >> 8;

#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) || \
	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
	if (!env_get("ethaddr")) {
		printf("<ethaddr> not set. Validating first E-fuse MAC\n");

		if (is_valid_ethaddr(mac_addr))
			eth_env_set_enetaddr("ethaddr", mac_addr);
	}

#ifdef CONFIG_DRIVER_TI_CPSW
	writel((GMII1_SEL_RMII | GMII2_SEL_RGMII | RGMII2_IDMODE), &cdev->miisel);
	cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII;
	rv = cpsw_register(&cpsw_data);
	if (rv < 0)
		printf("Error %d registering CPSW switch\n", rv);
	else
		n += rv;
#endif

	/*
	 *
	 * CPSW RGMII Internal Delay Mode is not supported in all PVT
	 * operating points.  So we must set the TX clock delay feature
	 * in the AR8051 PHY.  Since we only support a single ethernet
	 * device in U-Boot, we only do this for the first instance.
	 */
#define AR8051_PHY_DEBUG_ADDR_REG	0x1d
#define AR8051_PHY_DEBUG_DATA_REG	0x1e
#define AR8051_DEBUG_RGMII_CLK_DLY_REG	0x5
#define AR8051_RGMII_TX_CLK_DLY		0x100
	const char *devname;
	devname = miiphy_get_current_dev();

	miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_ADDR_REG,
			AR8051_DEBUG_RGMII_CLK_DLY_REG);
	miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_DATA_REG,
			AR8051_RGMII_TX_CLK_DLY);
#endif
	return n;
}
#endif
Commit	Line	Data
6ce89324 YY	1	/*
	2	* board.c
	3	*
	4	* Board functions for TI AM335X based boards
	5	*
	6	* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#include <common.h>
	12	#include <errno.h>
73223f0e	13	#include <libfdt.h>
6ce89324 YY	14	#include <spl.h>
	15	#include <asm/arch/cpu.h>
	16	#include <asm/arch/hardware.h>
	17	#include <asm/arch/omap.h>
	18	#include <asm/arch/ddr_defs.h>
	19	#include <asm/arch/clock.h>
	20	#include <asm/arch/gpio.h>
	21	#include <asm/arch/mmc_host_def.h>
	22	#include <asm/arch/sys_proto.h>
	23	#include <asm/arch/mem.h>
	24	#include <asm/arch/mux.h>
	25	#include <asm/io.h>
	26	#include <asm/emif.h>
	27	#include <asm/gpio.h>
	28	#include <i2c.h>
	29	#include <miiphy.h>
	30	#include <cpsw.h>
	31	#include <power/tps65217.h>
	32	#include <power/tps65910.h>
	33	#include <environment.h>
	34	#include <watchdog.h>
	35	#include "board.h"
	36
	37	DECLARE_GLOBAL_DATA_PTR;
	38
	39	/* GPIO that controls power to DDR on EVM-SK */
	40	#define GPIO_DDR_VTT_EN 7
	41	#define DIP_S1 44
dcf7f6f1	42	#define MPCIE_SW 100
6ce89324 YY	43
	44	static struct ctrl_dev cdev = (struct ctrl_dev )CTRL_DEVICE_BASE;
	45
	46	static int baltos_set_console(void)
	47	{
	48	int val, i, dips = 0;
	49	char buf[7];
	50
	51	for (i = 0; i < 4; i++) {
	52	sprintf(buf, "dip_s%d", i + 1);
	53
	54	if (gpio_request(DIP_S1 + i, buf)) {
	55	printf("failed to export GPIO %d\n", DIP_S1 + i);
	56	return 0;
	57	}
	58
	59	if (gpio_direction_input(DIP_S1 + i)) {
	60	printf("failed to set GPIO %d direction\n", DIP_S1 + i);
	61	return 0;
	62	}
	63
	64	val = gpio_get_value(DIP_S1 + i);
	65	dips \|= val << i;
	66	}
	67
	68	printf("DIPs: 0x%1x\n", (~dips) & 0xf);
	69
	70	if ((dips & 0xf) == 0xe)
382bee57	71	env_set("console", "ttyUSB0,115200n8");
6ce89324 YY	72
	73	return 0;
	74	}
	75
	76	static int read_eeprom(BSP_VS_HWPARAM *header)
	77	{
	78	i2c_set_bus_num(1);
	79
	80	/* Check if baseboard eeprom is available */
	81	if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
	82	puts("Could not probe the EEPROM; something fundamentally "
	83	"wrong on the I2C bus.\n");
	84	return -ENODEV;
	85	}
	86
	87	/* read the eeprom using i2c */
	88	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1, (uchar *)header,
	89	sizeof(BSP_VS_HWPARAM))) {
	90	puts("Could not read the EEPROM; something fundamentally"
	91	" wrong on the I2C bus.\n");
	92	return -EIO;
	93	}
	94
	95	if (header->Magic != 0xDEADBEEF) {
	96
	97	printf("Incorrect magic number (0x%x) in EEPROM\n",
	98	header->Magic);
	99
	100	/* fill default values */
	101	header->SystemId = 211;
	102	header->MAC1[0] = 0x00;
	103	header->MAC1[1] = 0x00;
	104	header->MAC1[2] = 0x00;
	105	header->MAC1[3] = 0x00;
	106	header->MAC1[4] = 0x00;
	107	header->MAC1[5] = 0x01;
	108
	109	header->MAC2[0] = 0x00;
	110	header->MAC2[1] = 0x00;
	111	header->MAC2[2] = 0x00;
	112	header->MAC2[3] = 0x00;
	113	header->MAC2[4] = 0x00;
	114	header->MAC2[5] = 0x02;
	115
	116	header->MAC3[0] = 0x00;
	117	header->MAC3[1] = 0x00;
	118	header->MAC3[2] = 0x00;
	119	header->MAC3[3] = 0x00;
	120	header->MAC3[4] = 0x00;
	121	header->MAC3[5] = 0x03;
	122	}
	123
	124	return 0;
	125	}
	126
	127	#if defined(CONFIG_SPL_BUILD) \|\| defined(CONFIG_NOR_BOOT)
	128
	129	static const struct ddr_data ddr3_baltos_data = {
	130	.datardsratio0 = MT41K256M16HA125E_RD_DQS,
	131	.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
	132	.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
	133	.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
	134	};
	135
136	static const struct cmd_control ddr3_baltos_cmd_ctrl_data = {
137	.cmd0csratio = MT41K256M16HA125E_RATIO,
138	.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
139
140	.cmd1csratio = MT41K256M16HA125E_RATIO,
141	.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
142
143	.cmd2csratio = MT41K256M16HA125E_RATIO,
144	.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
145	};
146
147	static struct emif_regs ddr3_baltos_emif_reg_data = {
148	.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
149	.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
150	.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
151	.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
152	.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
153	.zq_config = MT41K256M16HA125E_ZQ_CFG,
154	.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
155	};
156
157	#ifdef CONFIG_SPL_OS_BOOT
158	int spl_start_uboot(void)
159	{
160	/* break into full u-boot on 'c' */
161	return (serial_tstc() && serial_getc() == 'c');
162	}
163	#endif
164
165	#define OSC (V_OSCK/1000000)
166	const struct dpll_params dpll_ddr = {
167	266, OSC-1, 1, -1, -1, -1, -1};
168	const struct dpll_params dpll_ddr_evm_sk = {
169	303, OSC-1, 1, -1, -1, -1, -1};
170	const struct dpll_params dpll_ddr_baltos = {
171	400, OSC-1, 1, -1, -1, -1, -1};
172
173	void am33xx_spl_board_init(void)
174	{
175	int mpu_vdd;
176	int sil_rev;
177
178	/* Get the frequency */
179	dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
180
181	/*
182	* The GP EVM, IDK and EVM SK use a TPS65910 PMIC. For all
183	* MPU frequencies we support we use a CORE voltage of
184	* 1.1375V. For MPU voltage we need to switch based on
185	* the frequency we are running at.
186	*/
187	i2c_set_bus_num(1);
188
e6b1b58b YY	189	printf("I2C speed: %d Hz\n", CONFIG_SYS_OMAP24_I2C_SPEED);
e6b1b58b YY	190
6ce89324 YY	191	if (i2c_probe(TPS65910_CTRL_I2C_ADDR)) {
	192	puts("i2c: cannot access TPS65910\n");
	193	return;
	194	}
	195
	196	/*
	197	* Depending on MPU clock and PG we will need a different
	198	* VDD to drive at that speed.
	199	*/
	200	sil_rev = readl(&cdev->deviceid) >> 28;
	201	mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
	202	dpll_mpu_opp100.m);
	203
	204	/* Tell the TPS65910 to use i2c */
	205	tps65910_set_i2c_control();
	206
	207	/* First update MPU voltage. */
	208	if (tps65910_voltage_update(MPU, mpu_vdd))
	209	return;
	210
	211	/* Second, update the CORE voltage. */
	212	if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
	213	return;
	214
	215	/* Set CORE Frequencies to OPP100 */
	216	do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
	217
	218	/* Set MPU Frequency to what we detected now that voltages are set */
	219	do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
	220
	221	writel(0x000010ff, PRM_DEVICE_INST + 4);
	222	}
	223
	224	const struct dpll_params *get_dpll_ddr_params(void)
	225	{
	226	enable_i2c1_pin_mux();
	227	i2c_set_bus_num(1);
	228
	229	return &dpll_ddr_baltos;
	230	}
	231
	232	void set_uart_mux_conf(void)
	233	{
	234	enable_uart0_pin_mux();
	235	}
	236
	237	void set_mux_conf_regs(void)
	238	{
	239	enable_board_pin_mux();
	240	}
	241
	242	const struct ctrl_ioregs ioregs_baltos = {
	243	.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
	244	.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
	245	.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
	246	.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
	247	.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
	248	};
	249
	250	void sdram_init(void)
	251	{
	252	gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
	253	gpio_direction_output(GPIO_DDR_VTT_EN, 1);
	254
255	config_ddr(400, &ioregs_baltos,
256	&ddr3_baltos_data,
257	&ddr3_baltos_cmd_ctrl_data,
258	&ddr3_baltos_emif_reg_data, 0);
259	}
260	#endif
261
262	/*
263	* Basic board specific setup. Pinmux has been handled already.
264	*/
265	int board_init(void)
266	{
267	#if defined(CONFIG_HW_WATCHDOG)
268	hw_watchdog_init();
269	#endif
270
271	gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
272	#if defined(CONFIG_NOR) \|\| defined(CONFIG_NAND)
273	gpmc_init();
274	#endif
275	return 0;
276	}
277
278	int ft_board_setup(void blob, bd_t bd)
279	{
280	int node, ret;
281	unsigned char mac_addr[6];
282	BSP_VS_HWPARAM header;
283
284	/* get production data */
285	if (read_eeprom(&header))
286	return 0;
287
288	/* setup MAC1 */
289	mac_addr[0] = header.MAC1[0];
290	mac_addr[1] = header.MAC1[1];
291	mac_addr[2] = header.MAC1[2];
292	mac_addr[3] = header.MAC1[3];
293	mac_addr[4] = header.MAC1[4];
294	mac_addr[5] = header.MAC1[5];
295
296
297	node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100200");
298	if (node < 0) {
299	printf("no /soc/fman/ethernet path offset\n");
300	return -ENODEV;
301	}
302
303	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
304	if (ret) {
305	printf("error setting local-mac-address property\n");
306	return -ENODEV;
307	}
308
309	/* setup MAC2 */
310	mac_addr[0] = header.MAC2[0];
311	mac_addr[1] = header.MAC2[1];
312	mac_addr[2] = header.MAC2[2];
313	mac_addr[3] = header.MAC2[3];
314	mac_addr[4] = header.MAC2[4];
315	mac_addr[5] = header.MAC2[5];
316
317	node = fdt_path_offset(blob, "/ocp/ethernet/slave@4a100300");
318	if (node < 0) {
319	printf("no /soc/fman/ethernet path offset\n");
320	return -ENODEV;
321	}
322
323	ret = fdt_setprop(blob, node, "mac-address", &mac_addr, 6);
324	if (ret) {
325	printf("error setting local-mac-address property\n");
326	return -ENODEV;
327	}
328
329	printf("\nFDT was successfully setup\n");
330
331	return 0;
332	}
333
dcf7f6f1 YY	334	static struct module_pin_mux pcie_sw_pin_mux[] = {
	335	{OFFSET(mii1_rxdv), (MODE(7) \| PULLUDEN )}, /* GPIO3_4 */
	336	{-1},
	337	};
	338
6ce89324 YY	339	static struct module_pin_mux dip_pin_mux[] = {
	340	{OFFSET(gpmc_ad12), (MODE(7) \| RXACTIVE )}, /* GPIO1_12 */
	341	{OFFSET(gpmc_ad13), (MODE(7) \| RXACTIVE )}, /* GPIO1_13 */
	342	{OFFSET(gpmc_ad14), (MODE(7) \| RXACTIVE )}, /* GPIO1_14 */
	343	{OFFSET(gpmc_ad15), (MODE(7) \| RXACTIVE )}, /* GPIO1_15 */
	344	{-1},
	345	};
	346
	347	#ifdef CONFIG_BOARD_LATE_INIT
	348	int board_late_init(void)
	349	{
	350	#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
	351	BSP_VS_HWPARAM header;
	352	char model[4];
	353
	354	/* get production data */
	355	if (read_eeprom(&header)) {
192bc694	356	strcpy(model, "211");
6ce89324 YY	357	} else {
	358	sprintf(model, "%d", header.SystemId);
	359	if (header.SystemId == 215) {
	360	configure_module_pin_mux(dip_pin_mux);
	361	baltos_set_console();
	362	}
	363	}
dcf7f6f1 YY	364
	365	/* turn power for the mPCIe slot */
	366	configure_module_pin_mux(pcie_sw_pin_mux);
	367	if (gpio_request(MPCIE_SW, "mpcie_sw")) {
	368	printf("failed to export GPIO %d\n", MPCIE_SW);
	369	return -ENODEV;
	370	}
	371	if (gpio_direction_output(MPCIE_SW, 1)) {
	372	printf("failed to set GPIO %d direction\n", MPCIE_SW);
	373	return -ENODEV;
	374	}
	375
382bee57	376	env_set("board_name", model);
6ce89324 YY	377	#endif
	378
	379	return 0;
	380	}
	381	#endif
	382
	383	#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) \|\| \
	384	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
	385	static void cpsw_control(int enabled)
	386	{
	387	/* VTP can be added here */
	388
	389	return;
	390	}
	391
	392	static struct cpsw_slave_data cpsw_slaves[] = {
	393	{
	394	.slave_reg_ofs = 0x208,
	395	.sliver_reg_ofs = 0xd80,
	396	.phy_addr = 0,
	397	},
	398	{
	399	.slave_reg_ofs = 0x308,
	400	.sliver_reg_ofs = 0xdc0,
	401	.phy_addr = 7,
	402	},
	403	};
	404
	405	static struct cpsw_platform_data cpsw_data = {
	406	.mdio_base = CPSW_MDIO_BASE,
	407	.cpsw_base = CPSW_BASE,
	408	.mdio_div = 0xff,
	409	.channels = 8,
	410	.cpdma_reg_ofs = 0x800,
	411	.slaves = 2,
	412	.slave_data = cpsw_slaves,
	413	.active_slave = 1,
	414	.ale_reg_ofs = 0xd00,
	415	.ale_entries = 1024,
	416	.host_port_reg_ofs = 0x108,
	417	.hw_stats_reg_ofs = 0x900,
	418	.bd_ram_ofs = 0x2000,
	419	.mac_control = (1 << 5),
	420	.control = cpsw_control,
	421	.host_port_num = 0,
	422	.version = CPSW_CTRL_VERSION_2,
	423	};
	424	#endif
	425
	426	#if ((defined(CONFIG_SPL_ETH_SUPPORT) \|\| defined(CONFIG_SPL_USBETH_SUPPORT)) \
	427	&& defined(CONFIG_SPL_BUILD)) \|\| \
	428	((defined(CONFIG_DRIVER_TI_CPSW) \|\| \
95de1e2f	429	defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) && \
6ce89324 YY	430	!defined(CONFIG_SPL_BUILD))
	431	int board_eth_init(bd_t *bis)
	432	{
	433	int rv, n = 0;
	434	uint8_t mac_addr[6];
	435	uint32_t mac_hi, mac_lo;
6ce89324 YY	436
	437	/*
	438	* Note here that we're using CPSW1 since that has a 1Gbit PHY while
	439	* CSPW0 has a 100Mbit PHY.
	440	*
	441	* On product, CPSW1 maps to port labeled WAN.
	442	*/
	443
	444	/* try reading mac address from efuse */
	445	mac_lo = readl(&cdev->macid1l);
	446	mac_hi = readl(&cdev->macid1h);
	447	mac_addr[0] = mac_hi & 0xFF;
	448	mac_addr[1] = (mac_hi & 0xFF00) >> 8;
	449	mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
	450	mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
	451	mac_addr[4] = mac_lo & 0xFF;
	452	mac_addr[5] = (mac_lo & 0xFF00) >> 8;
	453
	454	#if (defined(CONFIG_DRIVER_TI_CPSW) && !defined(CONFIG_SPL_BUILD)) \|\| \
	455	(defined(CONFIG_SPL_ETH_SUPPORT) && defined(CONFIG_SPL_BUILD))
00caae6d	456	if (!env_get("ethaddr")) {
6ce89324 YY	457	printf("<ethaddr> not set. Validating first E-fuse MAC\n");
	458
	459	if (is_valid_ethaddr(mac_addr))
fd1e959e	460	eth_env_set_enetaddr("ethaddr", mac_addr);
6ce89324 YY	461	}
	462
	463	#ifdef CONFIG_DRIVER_TI_CPSW
	464	writel((GMII1_SEL_RMII \| GMII2_SEL_RGMII \| RGMII2_IDMODE), &cdev->miisel);
	465	cpsw_slaves[1].phy_if = PHY_INTERFACE_MODE_RGMII;
	466	rv = cpsw_register(&cpsw_data);
	467	if (rv < 0)
	468	printf("Error %d registering CPSW switch\n", rv);
	469	else
	470	n += rv;
	471	#endif
	472
	473	/*
	474	*
	475	* CPSW RGMII Internal Delay Mode is not supported in all PVT
	476	* operating points. So we must set the TX clock delay feature
	477	* in the AR8051 PHY. Since we only support a single ethernet
	478	* device in U-Boot, we only do this for the first instance.
	479	*/
	480	#define AR8051_PHY_DEBUG_ADDR_REG 0x1d
	481	#define AR8051_PHY_DEBUG_DATA_REG 0x1e
	482	#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5
	483	#define AR8051_RGMII_TX_CLK_DLY 0x100
	484	const char *devname;
	485	devname = miiphy_get_current_dev();
	486
	487	miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_ADDR_REG,
	488	AR8051_DEBUG_RGMII_CLK_DLY_REG);
	489	miiphy_write(devname, 0x7, AR8051_PHY_DEBUG_DATA_REG,
	490	AR8051_RGMII_TX_CLK_DLY);
	491	#endif
	492	return n;
	493	}
	494	#endif